RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>22840-1574-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1574-4) </PackageDescription>
    <NDC11Code>22840-1574-04</NDC11Code>
    <ProductNDC>22840-1574</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Cultivated Corn</ProprietaryName>
    <NonProprietaryName>Zea Mays</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>ZEA MAYS POLLEN</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
    <Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1574-2</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1574-2) </PackageDescription>
    <NDC11Code>22840-1574-02</NDC11Code>
    <ProductNDC>22840-1574</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Cultivated Corn</ProprietaryName>
    <NonProprietaryName>Zea Mays</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>ZEA MAYS POLLEN</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
    <Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>24286-1574-4</NDCCode>
    <PackageDescription>6 g in 1 JAR (24286-1574-4) </PackageDescription>
    <NDC11Code>24286-1574-04</NDC11Code>
    <ProductNDC>24286-1574</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acne Treatment With Sulfur</ProprietaryName>
    <NonProprietaryName>Sulfur</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190826</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>DLC Laboratories, Inc.</LabelerName>
    <SubstanceName>SULFUR</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-07-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211019</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne: 1 penetrates the pores and dries and clears acne pimples and blackheads, 2 helps to keep new acne pimples and blackheads from forming.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>36987-1574-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1574-4)</PackageDescription>
    <NDC11Code>36987-1574-04</NDC11Code>
    <ProductNDC>36987-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rice Grain</ProprietaryName>
    <NonProprietaryName>Rice Grain</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>RICE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Grain Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1574-1</NDCCode>
    <PackageDescription>4 mL in 1 VIAL (51662-1574-1) </PackageDescription>
    <NDC11Code>51662-1574-01</NDC11Code>
    <ProductNDC>51662-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210628</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018902</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210628</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations. Edema. Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired. Furosemide is indicated as adjunctive therapy in acute pulmonary edema. The IV administration of furosemide is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema. If gastrointestinal absorption is impaired or oral medication is not practical for any reason, furosemide is indicated by the IM or IV route. Parenteral use should be replaced with oral furosemide as soon as practical.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is a white to slightly yellow, odorless, crystalline powder. Practically insoluble in water; freely soluble in acetone, in dimethylformamide, and in solutions of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; slightly soluble in ether; very slightly soluble in chloroform. The structural formula is as follows. Furosemide Injection, USP is a sterile, nonpyrogenic solution of furosemide in Water for Injection prepared with the aid of sodium hydroxide for intramuscular (IM) or intravenous (IV) use. Each mL contains: Furosemide 10 mg; Water for Injection q.s.; sodium chloride to adjust isotonicity; sodium hydroxide and if necessary hydrochloric acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1574-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1574-3)  / 1 VIAL in 1 POUCH (51662-1574-2)  / 4 mL in 1 VIAL</PackageDescription>
    <NDC11Code>51662-1574-03</NDC11Code>
    <ProductNDC>51662-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210628</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018902</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210628</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations. Edema. Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired. Furosemide is indicated as adjunctive therapy in acute pulmonary edema. The IV administration of furosemide is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema. If gastrointestinal absorption is impaired or oral medication is not practical for any reason, furosemide is indicated by the IM or IV route. Parenteral use should be replaced with oral furosemide as soon as practical.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is a white to slightly yellow, odorless, crystalline powder. Practically insoluble in water; freely soluble in acetone, in dimethylformamide, and in solutions of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; slightly soluble in ether; very slightly soluble in chloroform. The structural formula is as follows. Furosemide Injection, USP is a sterile, nonpyrogenic solution of furosemide in Water for Injection prepared with the aid of sodium hydroxide for intramuscular (IM) or intravenous (IV) use. Each mL contains: Furosemide 10 mg; Water for Injection q.s.; sodium chloride to adjust isotonicity; sodium hydroxide and if necessary hydrochloric acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1574-0</NDCCode>
    <PackageDescription>4 TABLET in 1 BOTTLE (67296-1574-0) </PackageDescription>
    <NDC11Code>67296-1574-00</NDC11Code>
    <ProductNDC>67296-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202214</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
    <StrengthNumber>325; 5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-05-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). have not been tolerated, or are not expected to be tolerated. have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. [Structure-1]. C18H21NO3C4H6O6 2 ½ H2O M.W. = 494.49. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Structure-2]. C8H9NO2 M.W. = 151.16. Hydrocodone Bitartrate and Acetaminophen Tablets, USP for oral administration are available in the following strengths. Product Strength Hydrocodone Bitartrate Acetaminophen 5 mg/325 mg 5 mg 325 mg 7.5 mg/325 mg 7.5 mg 325 mg 10 mg/325 mg 10 mg 325 mg. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicon dioxide, and stearic acid. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1574-4</NDCCode>
    <PackageDescription>40 TABLET in 1 BOTTLE (67296-1574-4) </PackageDescription>
    <NDC11Code>67296-1574-04</NDC11Code>
    <ProductNDC>67296-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202214</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
    <StrengthNumber>325; 5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-05-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). have not been tolerated, or are not expected to be tolerated. have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. [Structure-1]. C18H21NO3C4H6O6 2 ½ H2O M.W. = 494.49. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. [Structure-2]. C8H9NO2 M.W. = 151.16. Hydrocodone Bitartrate and Acetaminophen Tablets, USP for oral administration are available in the following strengths. Product Strength Hydrocodone Bitartrate Acetaminophen 5 mg/325 mg 5 mg 325 mg 7.5 mg/325 mg 7.5 mg 325 mg 10 mg/325 mg 10 mg 325 mg. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicon dioxide, and stearic acid. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>70771-1574-4</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (70771-1574-4)  / 10 CAPSULE in 1 BLISTER PACK (70771-1574-2) </PackageDescription>
    <NDC11Code>70771-1574-04</NDC11Code>
    <ProductNDC>70771-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206752</ApplicationNumber>
    <LabelerName>Zydus Lifesciences Limited</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>225</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-1574-4</NDCCode>
    <PackageDescription>15 TABLET in 1 BOTTLE (71335-1574-4) </PackageDescription>
    <NDC11Code>71335-1574-04</NDC11Code>
    <ProductNDC>71335-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010829</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040362</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-11-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010829</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>53002-1574-0</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (53002-1574-0) </PackageDescription>
    <NDC11Code>53002-1574-00</NDC11Code>
    <ProductNDC>53002-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carvedilol</ProprietaryName>
    <NonProprietaryName>Carvedilol</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070905</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078332</ApplicationNumber>
    <LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CARVEDILOL</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carvedilol is an alpha-/beta-adrenergic blocking agent indicated for the treatment of:  : 1 mild to severe chronic heart failure (1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients (1.2), 3 hypertension (1.3).</IndicationAndUsage>
    <Description>Carvedilol is a nonselective β-adrenergic blocking agent with α1-blocking activity. It is (±)-1-(Carbazol-4-yloxy)-3-[[2-(o-methoxyphenoxy)ethyl]amino]-2-propanol. Carvedilol is a racemic mixture with the following structure. Carvedilol tablets, USP are white, oval, film-coated tablets containing 3.125 mg, 6.25 mg, 12.5 mg, or 25 mg of carvedilol. Inactive ingredients consist of lactose monohydrate, colloidal silicon dioxide, crospovidone, povidone, sucrose, magnesium stearate, polyethylene glycol 400, polysorbate 80, titanium dioxide, and hypromellose.Carvedilol USP is a white to off-white powder with a molecular weight of 406.5 and a molecular formula of C24H26N2O4. It is freely soluble in dimethylsulfoxide; soluble in methylene chloride and methanol; sparingly soluble in 95% ethanol and isopropanol; slightly soluble in ethyl ether; and practically insoluble in water, gastric fluid (simulated, TS, pH 1.1), and intestinal fluid (simulated, TS without pancreatin, pH 7.5). Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>53002-1574-3</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-1574-3) </PackageDescription>
    <NDC11Code>53002-1574-03</NDC11Code>
    <ProductNDC>53002-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carvedilol</ProprietaryName>
    <NonProprietaryName>Carvedilol</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070905</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078332</ApplicationNumber>
    <LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CARVEDILOL</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carvedilol is an alpha-/beta-adrenergic blocking agent indicated for the treatment of:  : 1 mild to severe chronic heart failure (1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients (1.2), 3 hypertension (1.3).</IndicationAndUsage>
    <Description>Carvedilol is a nonselective β-adrenergic blocking agent with α1-blocking activity. It is (±)-1-(Carbazol-4-yloxy)-3-[[2-(o-methoxyphenoxy)ethyl]amino]-2-propanol. Carvedilol is a racemic mixture with the following structure. Carvedilol tablets, USP are white, oval, film-coated tablets containing 3.125 mg, 6.25 mg, 12.5 mg, or 25 mg of carvedilol. Inactive ingredients consist of lactose monohydrate, colloidal silicon dioxide, crospovidone, povidone, sucrose, magnesium stearate, polyethylene glycol 400, polysorbate 80, titanium dioxide, and hypromellose.Carvedilol USP is a white to off-white powder with a molecular weight of 406.5 and a molecular formula of C24H26N2O4. It is freely soluble in dimethylsulfoxide; soluble in methylene chloride and methanol; sparingly soluble in 95% ethanol and isopropanol; slightly soluble in ethyl ether; and practically insoluble in water, gastric fluid (simulated, TS, pH 1.1), and intestinal fluid (simulated, TS without pancreatin, pH 7.5). Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-6425-0</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (54868-6425-0)  &gt; 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-6425-00</NDC11Code>
    <ProductNDC>54868-6425</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140516</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC],Retinoids [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane™ is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane™ should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane™ is indicated only for those female patients who are not pregnant, because Zenatane™ can cause severe birth defects (see BOXED CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane™. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, and Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane™ (isotretinoin capsules USP) in 10 mg, 20 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylated hydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain gelatin, glycerin, methylparaben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red  (LB-1574) containing D&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333)  containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titanium dioxide, and opacode black S-1-27794 containing iron oxide black, N-butyl alcohol, propylene glycol, industrial methylene spirit and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow or light orange crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in chloroform; sparingly soluble in  alcohol, in isopropyl alcohol and in polyethylene glycon 400. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-6426-0</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (54868-6426-0)  &gt; 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-6426-00</NDC11Code>
    <ProductNDC>54868-6426</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140516</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC],Retinoids [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane™ is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane™ should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane™ is indicated only for those female patients who are not pregnant, because Zenatane™ can cause severe birth defects (see BOXED CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane™. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, and Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane™ (isotretinoin capsules USP) in 10 mg, 20 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylated hydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain gelatin, glycerin, methylparaben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red  (LB-1574) containing D&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333)  containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titanium dioxide, and opacode black S-1-27794 containing iron oxide black, N-butyl alcohol, propylene glycol, industrial methylene spirit and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow or light orange crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in chloroform; sparingly soluble in  alcohol, in isopropyl alcohol and in polyethylene glycon 400. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-113-78</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (55111-113-78)  / 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK (55111-113-79) </PackageDescription>
    <NDC11Code>55111-0113-78</NDC11Code>
    <ProductNDC>55111-113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150309</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane is indicated only for those patients who are not pregnant, because Zenatane can cause life threatening birth defects (see Boxed CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane (isotretinoin capsules, USP) in 10 mg, 20 mg, 30 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylatedhydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain ferric oxide red, ferricoxide yellow (for 30 mg), gelatin, glycerin, methyl paraben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red (LB-1574) containingD&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titaniumdioxide, and opacode black S-1-17823 containing iron oxide black, N-butyl alcohol, propylene glycol, ammonium hydroxide and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to slightly orange crystalline powder with a molecular weight of 300.44. Thestructural formula is. Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-113-81</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (55111-113-81)  / 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK (55111-113-79) </PackageDescription>
    <NDC11Code>55111-0113-81</NDC11Code>
    <ProductNDC>55111-113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150309</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane is indicated only for those patients who are not pregnant, because Zenatane can cause life threatening birth defects (see Boxed CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane (isotretinoin capsules, USP) in 10 mg, 20 mg, 30 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylatedhydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain ferric oxide red, ferricoxide yellow (for 30 mg), gelatin, glycerin, methyl paraben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red (LB-1574) containingD&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titaniumdioxide, and opacode black S-1-17823 containing iron oxide black, N-butyl alcohol, propylene glycol, ammonium hydroxide and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to slightly orange crystalline powder with a molecular weight of 300.44. Thestructural formula is. Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-135-81</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (55111-135-81)  / 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK (55111-135-79) </PackageDescription>
    <NDC11Code>55111-0135-81</NDC11Code>
    <ProductNDC>55111-135</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane is indicated only for those patients who are not pregnant, because Zenatane can cause life threatening birth defects (see Boxed CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane (isotretinoin capsules, USP) in 10 mg, 20 mg, 30 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylatedhydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain ferric oxide red, ferricoxide yellow (for 30 mg), gelatin, glycerin, methyl paraben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red (LB-1574) containingD&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titaniumdioxide, and opacode black S-1-17823 containing iron oxide black, N-butyl alcohol, propylene glycol, ammonium hydroxide and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to slightly orange crystalline powder with a molecular weight of 300.44. Thestructural formula is. Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-136-81</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (55111-136-81)  / 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK (55111-136-79) </PackageDescription>
    <NDC11Code>55111-0136-81</NDC11Code>
    <ProductNDC>55111-136</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane is indicated only for those patients who are not pregnant, because Zenatane can cause life threatening birth defects (see Boxed CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane (isotretinoin capsules, USP) in 10 mg, 20 mg, 30 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylatedhydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain ferric oxide red, ferricoxide yellow (for 30 mg), gelatin, glycerin, methyl paraben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red (LB-1574) containingD&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titaniumdioxide, and opacode black S-1-17823 containing iron oxide black, N-butyl alcohol, propylene glycol, ammonium hydroxide and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to slightly orange crystalline powder with a molecular weight of 300.44. Thestructural formula is. Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-137-81</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (55111-137-81)  / 10 CAPSULE, GELATIN COATED in 1 BLISTER PACK (55111-137-79) </PackageDescription>
    <NDC11Code>55111-0137-81</NDC11Code>
    <ProductNDC>55111-137</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zenatane</ProprietaryName>
    <NonProprietaryName>Isotretinoin</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202099</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>ISOTRETINOIN</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe Recalcitrant Nodular Acne. Zenatane is indicated for the treatment of severe recalcitrant nodular acne. Nodules are inflammatory lesions with a diameter of 5 mm or greater. The nodules may become suppurative or hemorrhagic. “Severe,” by definition,2 means “many” as opposed to “few or several” nodules. Because of significant adverse effects associated with its use, Zenatane should be reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. In addition, Zenatane is indicated only for those patients who are not pregnant, because Zenatane can cause life threatening birth defects (see Boxed CONTRAINDICATIONS AND WARNINGS). A single course of therapy for 15 to 20 weeks has been shown to result in complete and prolonged remission of disease in many patients.1,3,4 If a second course of therapy is needed, it should not be initiated until at least 8 weeks after completion of the first course, because experience has shown that patients may continue to improve while off Zenatane. The optimal interval before retreatment has not been defined for patients who have not completed skeletal growth (see WARNINGS: Skeletal: Bone Mineral Density, Hyperostosis, Premature Epiphyseal Closure).</IndicationAndUsage>
    <Description>Isotretinoin USP, a retinoid, is available as Zenatane (isotretinoin capsules, USP) in 10 mg, 20 mg, 30 mg and 40 mg soft gelatin capsules for oral administration. Each capsule contains butylatedhydroxyanisole, edetate disodium, hydrogenated vegetable oil (Type-I and Type-II), medium chain triglyceride, refined soybean oil and white wax. Gelatin capsules contain ferric oxide red, ferricoxide yellow (for 30 mg), gelatin, glycerin, methyl paraben, propyl paraben, lake blend blue(LB-332) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 10 mg), lake blend red (LB-1574) containingD&amp;C Red No.27, D&amp;C Red No.30 (for 20 mg), lake blend green (LB-333) containing D&amp;C Yellow No.10, FD&amp;C Blue No.1 (for 40 mg), lake blend white (TLB-1774) containing FD&amp;C Blue No.2, titaniumdioxide, and opacode black S-1-17823 containing iron oxide black, N-butyl alcohol, propylene glycol, ammonium hydroxide and shellac. Chemically, isotretinoin is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow to slightly orange crystalline powder with a molecular weight of 300.44. Thestructural formula is. Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>60219-1574-1</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (60219-1574-1)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>60219-1574-01</NDC11Code>
    <ProductNDC>60219-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylprednisolone Acetate</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE</RouteName>
    <StartMarketingDate>20220410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210043</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE ACETATE</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>A. For Intramuscular Administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of methylprednisolone acetate injectable suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative dermatitis, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsupportive thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of: leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus. B. For Intra-articular Or Soft Tissue Administration. (see WARNINGS). Methylprednisolone acetate injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis. C. For Intralesional Administration. Methylprednisolone acetate injectable suspension is indicated for intralesional use in alopecia areata, discoid lupus erythematosus; keloids, localized hypertrophic, infiltrated inflammatory lesions of granuloma annulare, lichen planus, lichen simplex chronicus (neurodermatitis) and psoriatic plaques; necrobiosis lipoidica diabeticorum. Methylprednisolone acetate injectable suspension also may be useful in cystic tumors of an aponeurosis or tendon (ganglia).</IndicationAndUsage>
    <Description>Methylprednisolone acetate injectable suspension, USP is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51 g/mol. The structural formula is represented below. Methylprednisolone acetate injectable suspension, USP contains methylprednisolone acetate, USP which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate, USP is a white or almost white crystalline powder which melts at about 213° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>60219-1574-5</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (60219-1574-5)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>60219-1574-05</NDC11Code>
    <ProductNDC>60219-1574</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylprednisolone Acetate</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE</RouteName>
    <StartMarketingDate>20220410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210043</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE ACETATE</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>A. For Intramuscular Administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of methylprednisolone acetate injectable suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative dermatitis, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsupportive thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of: leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus. B. For Intra-articular Or Soft Tissue Administration. (see WARNINGS). Methylprednisolone acetate injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis. C. For Intralesional Administration. Methylprednisolone acetate injectable suspension is indicated for intralesional use in alopecia areata, discoid lupus erythematosus; keloids, localized hypertrophic, infiltrated inflammatory lesions of granuloma annulare, lichen planus, lichen simplex chronicus (neurodermatitis) and psoriatic plaques; necrobiosis lipoidica diabeticorum. Methylprednisolone acetate injectable suspension also may be useful in cystic tumors of an aponeurosis or tendon (ganglia).</IndicationAndUsage>
    <Description>Methylprednisolone acetate injectable suspension, USP is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51 g/mol. The structural formula is represented below. Methylprednisolone acetate injectable suspension, USP contains methylprednisolone acetate, USP which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate, USP is a white or almost white crystalline powder which melts at about 213° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0100-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0100-4) </PackageDescription>
    <NDC11Code>22840-0100-04</NDC11Code>
    <ProductNDC>22840-0100</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Cat Hair Allergenic Extract</ProprietaryName>
    <NonProprietaryName>Felis Catus</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19920924</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103397</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>FELIS CATUS DANDER; FELIS CATUS SKIN</SubstanceName>
    <StrengthNumber>5000; 5000</StrengthNumber>
    <StrengthUnit>[BAU]/mL; [BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Animal Fur [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Cat Hair Allergenic Extract is indicated for: 1 Skin test diagnosis of patients with a history of allergy to cats., 2 Treatment of cat hair-induced allergic asthma, rhinitis and conjunctivitis. Immunotherapy is indicated when cat allergy is established and the patient cannot avoid exposure to cat allergens.</IndicationAndUsage>
    <Description>GREER Standardized Cat Hair Allergenic Extract is a sterile solution of extracted cat pelt and cat dander. Each vial contains sterile Standardized Cat Hair Allergenic Extract at 10,000 BAU/milliliter or 5,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol volume/volume (preservative). Inactive ingredients include 0.5% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. GREER Standardized Cat Hair Allergenic Extract is labeled in BAU/milliliter. This allergenic extract is not interchangeable with Standardized Cat Pelt Extract or with cat extracts labeled in Allergy Units. The extract is standardized by comparing potency of cat allergen (Fel d 1) units by radial immunodiffusion against a reference standard from the Center for Biologics Evaluation and Research (CBER) of the U.S. Food and Drug Administration (FDA). 4,5 An extract with 10.0 to 19.9 Fel d 1 units per milliliter is designated as 10,000 BAU/milliliter by the FDA based on quantitative skin testing. 4,5.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0101-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0101-4) </PackageDescription>
    <NDC11Code>22840-0101-04</NDC11Code>
    <ProductNDC>22840-0101</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Cat Hair Allergenic Extract</ProprietaryName>
    <NonProprietaryName>Felis Catus</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19920924</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103397</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>FELIS CATUS DANDER; FELIS CATUS SKIN</SubstanceName>
    <StrengthNumber>10000; 10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL; [BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Animal Fur [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19920924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Cat Hair Allergenic Extract is indicated for: 1 Skin test diagnosis of patients with a history of allergy to cats., 2 Treatment of cat hair-induced allergic asthma, rhinitis and conjunctivitis. Immunotherapy is indicated when cat allergy is established and the patient cannot avoid exposure to cat allergens.</IndicationAndUsage>
    <Description>GREER Standardized Cat Hair Allergenic Extract is a sterile solution of extracted cat pelt and cat dander. Each vial contains sterile Standardized Cat Hair Allergenic Extract at 10,000 BAU/milliliter or 5,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol volume/volume (preservative). Inactive ingredients include 0.5% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. GREER Standardized Cat Hair Allergenic Extract is labeled in BAU/milliliter. This allergenic extract is not interchangeable with Standardized Cat Pelt Extract or with cat extracts labeled in Allergy Units. The extract is standardized by comparing potency of cat allergen (Fel d 1) units by radial immunodiffusion against a reference standard from the Center for Biologics Evaluation and Research (CBER) of the U.S. Food and Drug Administration (FDA). 4,5 An extract with 10.0 to 19.9 Fel d 1 units per milliliter is designated as 10,000 BAU/milliliter by the FDA based on quantitative skin testing. 4,5.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0200-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0200-4) </PackageDescription>
    <NDC11Code>22840-0200-04</NDC11Code>
    <ProductNDC>22840-0200</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
    <NonProprietaryName>Cynodon Dactylon</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101836</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0201-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0201-4) </PackageDescription>
    <NDC11Code>22840-0201-04</NDC11Code>
    <ProductNDC>22840-0201</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
    <NonProprietaryName>Poa Pratensis</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101837</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0202-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0202-4) </PackageDescription>
    <NDC11Code>22840-0202-04</NDC11Code>
    <ProductNDC>22840-0202</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
    <NonProprietaryName>Poa Pratensis</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101837</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0203-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0203-4) </PackageDescription>
    <NDC11Code>22840-0203-04</NDC11Code>
    <ProductNDC>22840-0203</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Meadow Fescue Pollen</ProprietaryName>
    <NonProprietaryName>Festuca Elatior</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101838</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0204-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0204-4) </PackageDescription>
    <NDC11Code>22840-0204-04</NDC11Code>
    <ProductNDC>22840-0204</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Meadow Fescue Pollen</ProprietaryName>
    <NonProprietaryName>Festuca Elatior</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101838</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0205-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0205-4) </PackageDescription>
    <NDC11Code>22840-0205-04</NDC11Code>
    <ProductNDC>22840-0205</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Orchard Grass Pollen</ProprietaryName>
    <NonProprietaryName>Dactylis Glomerata</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101839</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-0206-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0206-4) </PackageDescription>
    <NDC11Code>22840-0206-04</NDC11Code>
    <ProductNDC>22840-0206</ProductNDC>
    <ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Standardized Orchard Grass Pollen</ProprietaryName>
    <NonProprietaryName>Dactylis Glomerata</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19680915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101839</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>DACTYLIS GLOMERATA POLLEN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19680915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GREER Standardized Grass Pollen Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergy to one or more of the following grass pollens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, Timothy., 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen. .</IndicationAndUsage>
    <Description>Standardized Grass Pollen Allergenic Extracts include Standardized Bermuda Grass Pollen ( Cynodon dactylon) at 10,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol (preservative); and the following grasses at both 10,000 BAU/milliliter and 100,000 BAU/milliliter, 50% glycerin volume/volume, and 0.4% phenol: Standardized Kentucky Blue (June) Grass Pollen ( Poa pratensis), Standardized Meadow Fescue Grass Pollen ( Festuca elatior), Standardized Orchard Grass Pollen ( Dactylis glomerata), Standardized Perennial Rye Grass Pollen ( Lolium perenne), Standardized Redtop Grass Pollen ( Agrostis alba), Standardized Sweet Vernal Grass Pollen ( Anthoxanthum odoratum), and Standardized Timothy Grass Pollen ( Phleum pratense). Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Allergenic Extracts should be clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Allergenic Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing. 4,5,6,7 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
  </NDC>
</NDCList>