{
"NDC": [
{
"NDCCode": "22840-2618-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-2618-1) ",
"NDC11Code": "22840-2618-01",
"ProductNDC": "22840-2618",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Phoma Betae",
"NonProprietaryName": "Phoma Betae",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "PLEOSPORA BETAE",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "0220-2618-31",
"PackageDescription": "9 [hp_C] in 1 TUBE (0220-2618-31) ",
"NDC11Code": "00220-2618-31",
"ProductNDC": "0220-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Influenzinum",
"NonProprietaryName": "Influenza A Virus A/brisbane/02/2018 Ivr-190 (h1n1) Hemagglutinin Antigen (formaldehyde Inactivated),influenza A Virus A/kansas/14/2017 X-327 (h3n2) Hemagglutinin Antigen (formaldehyde Inactivated), Influenza B Virus B/maryland/15/2016 Bx-69a Antigen (formaldehyde Inactivated), Influenza B Virus B/phuket/3073/2013 Hemagglutinin Antigen (formaldehyde Inactivated)",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "INFLUENZA B VIRUS B/PHUKET/3073/2013 HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/KANSAS/14/2017 X-327 (H3N2) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/BRISBANE/02/2018 IVR-190 (H1N1) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "9; 9; 9; 9",
"StrengthUnit": "[hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]",
"Status": "Deprecated",
"LastUpdate": "2021-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N"
},
{
"NDCCode": "0220-2618-41",
"PackageDescription": "9 [hp_C] in 1 TUBE (0220-2618-41) ",
"NDC11Code": "00220-2618-41",
"ProductNDC": "0220-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Influenzinum",
"NonProprietaryName": "Influenza A Virus A/brisbane/02/2018 Ivr-190 (h1n1) Hemagglutinin Antigen (formaldehyde Inactivated),influenza A Virus A/kansas/14/2017 X-327 (h3n2) Hemagglutinin Antigen (formaldehyde Inactivated), Influenza B Virus B/maryland/15/2016 Bx-69a Antigen (formaldehyde Inactivated), Influenza B Virus B/phuket/3073/2013 Hemagglutinin Antigen (formaldehyde Inactivated)",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "INFLUENZA B VIRUS B/PHUKET/3073/2013 HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/KANSAS/14/2017 X-327 (H3N2) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/BRISBANE/02/2018 IVR-190 (H1N1) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "9; 9; 9; 9",
"StrengthUnit": "[hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]",
"Status": "Deprecated",
"LastUpdate": "2021-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N"
},
{
"NDCCode": "36987-2618-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2618-1)",
"NDC11Code": "36987-2618-01",
"ProductNDC": "36987-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arizona Cypress",
"NonProprietaryName": "Arizona Cypress",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CUPRESSUS ARIZONICA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2618-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2618-2)",
"NDC11Code": "36987-2618-02",
"ProductNDC": "36987-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arizona Cypress",
"NonProprietaryName": "Arizona Cypress",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CUPRESSUS ARIZONICA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2618-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2618-3)",
"NDC11Code": "36987-2618-03",
"ProductNDC": "36987-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arizona Cypress",
"NonProprietaryName": "Arizona Cypress",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CUPRESSUS ARIZONICA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2618-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2618-4)",
"NDC11Code": "36987-2618-04",
"ProductNDC": "36987-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arizona Cypress",
"NonProprietaryName": "Arizona Cypress",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CUPRESSUS ARIZONICA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2618-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-2618-1) ",
"NDC11Code": "37662-2618-01",
"ProductNDC": "37662-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gallium Arsenatum",
"NonProprietaryName": "Gallium Arsenatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "GALLIUM ARSENIDE",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2618-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-2618-2) ",
"NDC11Code": "37662-2618-02",
"ProductNDC": "37662-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gallium Arsenatum",
"NonProprietaryName": "Gallium Arsenatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "GALLIUM ARSENIDE",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2618-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-2618-3) ",
"NDC11Code": "37662-2618-03",
"ProductNDC": "37662-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gallium Arsenatum",
"NonProprietaryName": "Gallium Arsenatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "GALLIUM ARSENIDE",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2618-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-2618-4) ",
"NDC11Code": "37662-2618-04",
"ProductNDC": "37662-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gallium Arsenatum",
"NonProprietaryName": "Gallium Arsenatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230206",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "GALLIUM ARSENIDE",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N"
},
{
"NDCCode": "50090-2618-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (50090-2618-0) ",
"NDC11Code": "50090-2618-00",
"ProductNDC": "50090-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078380",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20161114",
"SamplePackage": "N"
},
{
"NDCCode": "50090-2618-1",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-2618-1) ",
"NDC11Code": "50090-2618-01",
"ProductNDC": "50090-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078380",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20161114",
"SamplePackage": "N"
},
{
"NDCCode": "68071-2618-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (68071-2618-3) ",
"NDC11Code": "68071-2618-03",
"ProductNDC": "68071-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075483",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220118",
"SamplePackage": "N",
"IndicationAndUsage": "Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.",
"Description": "Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides."
},
{
"NDCCode": "68071-2618-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (68071-2618-9) ",
"NDC11Code": "68071-2618-09",
"ProductNDC": "68071-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075483",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220118",
"SamplePackage": "N",
"IndicationAndUsage": "Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.",
"Description": "Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides."
},
{
"NDCCode": "69522-2618-1",
"PackageDescription": "1 mg in 1 BOTTLE, PUMP (69522-2618-1) ",
"NDC11Code": "69522-2618-01",
"ProductNDC": "69522-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Big Cloud Defend Daily Face Moisturizer Broad Spectrum Spf30",
"NonProprietaryName": "Avobenzone, Homosalate And Octocrylene Lotion",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Dollar Shave Club, Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTOCRYLENE",
"StrengthNumber": "2.5; 7; 4.5",
"StrengthUnit": "mg/100mg; mg/100mg; mg/100mg",
"Status": "Deprecated",
"LastUpdate": "2024-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200501",
"SamplePackage": "N",
"IndicationAndUsage": " Helps prevent sunburn. If used as directed with other sun protection measures (see DIrections), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "69522-2618-2",
"PackageDescription": "1 mg in 1 TUBE (69522-2618-2) ",
"NDC11Code": "69522-2618-02",
"ProductNDC": "69522-2618",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Big Cloud Defend Daily Face Moisturizer Broad Spectrum Spf30",
"NonProprietaryName": "Avobenzone, Homosalate And Octocrylene Lotion",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Dollar Shave Club, Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTOCRYLENE",
"StrengthNumber": "2.5; 7; 4.5",
"StrengthUnit": "mg/100mg; mg/100mg; mg/100mg",
"Status": "Deprecated",
"LastUpdate": "2024-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200501",
"SamplePackage": "N",
"IndicationAndUsage": " Helps prevent sunburn. If used as directed with other sun protection measures (see DIrections), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "70350-2618-6",
"PackageDescription": "177 mL in 1 BOTTLE (70350-2618-6) ",
"NDC11Code": "70350-2618-06",
"ProductNDC": "70350-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lido-k",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160215",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "SOLUTECH PHARMACEUTICALS LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160215",
"SamplePackage": "N",
"IndicationAndUsage": "Topical anesthetic for use on intact skin for pain and local analgesic.",
"Description": "Contains Lidocaine Hydrochloride. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), and has the following structure. Each mL of Lido-K Lotion contains ACTIVE: Lidocaine HCl 30 mg in a lotion base of INACTIVES: Mineral Oil, Petrolatum, Cetyl Alcohol, Stearic Acid, Methylparaben, Propylparaben, Lexemul, Water, Sodium Hydroxide (50%), Aluminum Sulfate, and Calcium Acetate."
},
{
"NDCCode": "70518-2618-0",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (70518-2618-0) ",
"NDC11Code": "70518-2618-00",
"ProductNDC": "70518-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200309",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205085",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200309",
"SamplePackage": "N",
"IndicationAndUsage": "Carisoprodol tablets, USP is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol tablets, USP should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration [ see Dosage and Administration ( 2) ].",
"Description": "Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is:. Other ingredients in the carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, maize starch, croscarmellose sodium, povidone, talc and magnesium stearate."
},
{
"NDCCode": "70518-2618-1",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (70518-2618-1) ",
"NDC11Code": "70518-2618-01",
"ProductNDC": "70518-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200309",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205085",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200309",
"SamplePackage": "N",
"IndicationAndUsage": "Carisoprodol tablets, USP is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol tablets, USP should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration [ see Dosage and Administration ( 2) ].",
"Description": "Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is:. Other ingredients in the carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, maize starch, croscarmellose sodium, povidone, talc and magnesium stearate."
},
{
"NDCCode": "71335-2618-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-2618-1) ",
"NDC11Code": "71335-2618-01",
"ProductNDC": "71335-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206083",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250529",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure < 140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure < 90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure < 130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure < 80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake."
},
{
"NDCCode": "71335-2618-2",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-2618-2) ",
"NDC11Code": "71335-2618-02",
"ProductNDC": "71335-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206083",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250529",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure < 140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure < 90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure < 130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure < 80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake."
},
{
"NDCCode": "72162-2618-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (72162-2618-1) ",
"NDC11Code": "72162-2618-01",
"ProductNDC": "72162-2618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propafenone Hydrochloride",
"NonProprietaryName": "Propafenone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191025",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202445",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PROPAFENONE HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260420",
"SamplePackage": "N",
"IndicationAndUsage": "Propafenone hydrochloride tablets are indicated to: 1 prolong the time to recurrence of paroxysmal atrial fibrillation/flutter (PAF) associated with disabling symptoms in patients without structural heart disease., 2 prolong the time to recurrence of paroxysmal supraventricular tachycardia (PSVT) associated with disabling symptoms in patients without structural heart disease., 3 treat documented ventricular arrhythmias, such as sustained ventricular tachycardia that, in the judgment of the physician, are life-threatening. Initiate treatment in the hospital.",
"Description": "Propafenone hydrochloride is an antiarrhythmic drug supplied in film-coated tablets of 150 mg, 225 mg and 300 mg for oral administration. Propafenone has some structural similarities to beta-blocking agents. Chemically, propafenone hydrochloride is 2’-[2-hydroxy-3-(propylamino)-propoxy]-3-phenylpropiophenone hydrochloride, with a molecular weight of 377.92. The molecular formula is C21H27NO3HCl. The structural formula of propafenone hydrochloride is given below. Propafenone hydrochloride occurs as white crystalline powder. It is soluble in methanol and in hot water; slightly soluble in alcohol and in chloroform; very slightly soluble in acetone; insoluble in diethyl ether and in toluene. The following inactive ingredients are contained in the tablet: corn starch, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "22840-0033-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) ",
"NDC11Code": "22840-0033-06",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) ",
"NDC11Code": "22840-0033-08",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) ",
"NDC11Code": "22840-0033-09",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0034-3) ",
"NDC11Code": "22840-0034-03",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) ",
"NDC11Code": "22840-0034-06",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) ",
"NDC11Code": "22840-0034-08",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) ",
"NDC11Code": "22840-0034-09",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>22840-2618-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-2618-1) </PackageDescription>
<NDC11Code>22840-2618-01</NDC11Code>
<ProductNDC>22840-2618</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Phoma Betae</ProprietaryName>
<NonProprietaryName>Phoma Betae</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>PLEOSPORA BETAE</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0220-2618-31</NDCCode>
<PackageDescription>9 [hp_C] in 1 TUBE (0220-2618-31) </PackageDescription>
<NDC11Code>00220-2618-31</NDC11Code>
<ProductNDC>0220-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Influenzinum</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/brisbane/02/2018 Ivr-190 (h1n1) Hemagglutinin Antigen (formaldehyde Inactivated),influenza A Virus A/kansas/14/2017 X-327 (h3n2) Hemagglutinin Antigen (formaldehyde Inactivated), Influenza B Virus B/maryland/15/2016 Bx-69a Antigen (formaldehyde Inactivated), Influenza B Virus B/phuket/3073/2013 Hemagglutinin Antigen (formaldehyde Inactivated)</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>INFLUENZA B VIRUS B/PHUKET/3073/2013 HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/KANSAS/14/2017 X-327 (H3N2) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/BRISBANE/02/2018 IVR-190 (H1N1) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>9; 9; 9; 9</StrengthNumber>
<StrengthUnit>[hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0220-2618-41</NDCCode>
<PackageDescription>9 [hp_C] in 1 TUBE (0220-2618-41) </PackageDescription>
<NDC11Code>00220-2618-41</NDC11Code>
<ProductNDC>0220-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Influenzinum</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/brisbane/02/2018 Ivr-190 (h1n1) Hemagglutinin Antigen (formaldehyde Inactivated),influenza A Virus A/kansas/14/2017 X-327 (h3n2) Hemagglutinin Antigen (formaldehyde Inactivated), Influenza B Virus B/maryland/15/2016 Bx-69a Antigen (formaldehyde Inactivated), Influenza B Virus B/phuket/3073/2013 Hemagglutinin Antigen (formaldehyde Inactivated)</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>INFLUENZA B VIRUS B/PHUKET/3073/2013 HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/KANSAS/14/2017 X-327 (H3N2) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 BX-69A ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/BRISBANE/02/2018 IVR-190 (H1N1) HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>9; 9; 9; 9</StrengthNumber>
<StrengthUnit>[hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]; [hp_C]/9[hp_C]</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>36987-2618-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2618-1)</PackageDescription>
<NDC11Code>36987-2618-01</NDC11Code>
<ProductNDC>36987-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arizona Cypress</ProprietaryName>
<NonProprietaryName>Arizona Cypress</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CUPRESSUS ARIZONICA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2618-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2618-2)</PackageDescription>
<NDC11Code>36987-2618-02</NDC11Code>
<ProductNDC>36987-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arizona Cypress</ProprietaryName>
<NonProprietaryName>Arizona Cypress</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CUPRESSUS ARIZONICA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2618-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2618-3)</PackageDescription>
<NDC11Code>36987-2618-03</NDC11Code>
<ProductNDC>36987-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arizona Cypress</ProprietaryName>
<NonProprietaryName>Arizona Cypress</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CUPRESSUS ARIZONICA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2618-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2618-4)</PackageDescription>
<NDC11Code>36987-2618-04</NDC11Code>
<ProductNDC>36987-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arizona Cypress</ProprietaryName>
<NonProprietaryName>Arizona Cypress</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CUPRESSUS ARIZONICA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2618-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-2618-1) </PackageDescription>
<NDC11Code>37662-2618-01</NDC11Code>
<ProductNDC>37662-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gallium Arsenatum</ProprietaryName>
<NonProprietaryName>Gallium Arsenatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>GALLIUM ARSENIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2618-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-2618-2) </PackageDescription>
<NDC11Code>37662-2618-02</NDC11Code>
<ProductNDC>37662-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gallium Arsenatum</ProprietaryName>
<NonProprietaryName>Gallium Arsenatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>GALLIUM ARSENIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2618-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-2618-3) </PackageDescription>
<NDC11Code>37662-2618-03</NDC11Code>
<ProductNDC>37662-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gallium Arsenatum</ProprietaryName>
<NonProprietaryName>Gallium Arsenatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>GALLIUM ARSENIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2618-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-2618-4) </PackageDescription>
<NDC11Code>37662-2618-04</NDC11Code>
<ProductNDC>37662-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gallium Arsenatum</ProprietaryName>
<NonProprietaryName>Gallium Arsenatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230206</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>GALLIUM ARSENIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-2618-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (50090-2618-0) </PackageDescription>
<NDC11Code>50090-2618-00</NDC11Code>
<ProductNDC>50090-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078380</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-2618-1</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-2618-1) </PackageDescription>
<NDC11Code>50090-2618-01</NDC11Code>
<ProductNDC>50090-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078380</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68071-2618-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (68071-2618-3) </PackageDescription>
<NDC11Code>68071-2618-03</NDC11Code>
<ProductNDC>68071-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075483</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.</IndicationAndUsage>
<Description>Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>68071-2618-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (68071-2618-9) </PackageDescription>
<NDC11Code>68071-2618-09</NDC11Code>
<ProductNDC>68071-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075483</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.</IndicationAndUsage>
<Description>Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>69522-2618-1</NDCCode>
<PackageDescription>1 mg in 1 BOTTLE, PUMP (69522-2618-1) </PackageDescription>
<NDC11Code>69522-2618-01</NDC11Code>
<ProductNDC>69522-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Big Cloud Defend Daily Face Moisturizer Broad Spectrum Spf30</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate And Octocrylene Lotion</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Dollar Shave Club, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>2.5; 7; 4.5</StrengthNumber>
<StrengthUnit>mg/100mg; mg/100mg; mg/100mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Helps prevent sunburn. If used as directed with other sun protection measures (see DIrections), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69522-2618-2</NDCCode>
<PackageDescription>1 mg in 1 TUBE (69522-2618-2) </PackageDescription>
<NDC11Code>69522-2618-02</NDC11Code>
<ProductNDC>69522-2618</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Big Cloud Defend Daily Face Moisturizer Broad Spectrum Spf30</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate And Octocrylene Lotion</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Dollar Shave Club, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>2.5; 7; 4.5</StrengthNumber>
<StrengthUnit>mg/100mg; mg/100mg; mg/100mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Helps prevent sunburn. If used as directed with other sun protection measures (see DIrections), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70350-2618-6</NDCCode>
<PackageDescription>177 mL in 1 BOTTLE (70350-2618-6) </PackageDescription>
<NDC11Code>70350-2618-06</NDC11Code>
<ProductNDC>70350-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lido-k</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160215</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>SOLUTECH PHARMACEUTICALS LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical anesthetic for use on intact skin for pain and local analgesic.</IndicationAndUsage>
<Description>Contains Lidocaine Hydrochloride. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), and has the following structure. Each mL of Lido-K Lotion contains ACTIVE: Lidocaine HCl 30 mg in a lotion base of INACTIVES: Mineral Oil, Petrolatum, Cetyl Alcohol, Stearic Acid, Methylparaben, Propylparaben, Lexemul, Water, Sodium Hydroxide (50%), Aluminum Sulfate, and Calcium Acetate.</Description>
</NDC>
<NDC>
<NDCCode>70518-2618-0</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (70518-2618-0) </PackageDescription>
<NDC11Code>70518-2618-00</NDC11Code>
<ProductNDC>70518-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200309</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205085</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carisoprodol tablets, USP is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol tablets, USP should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration [ see Dosage and Administration ( 2) ].</IndicationAndUsage>
<Description>Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is:. Other ingredients in the carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, maize starch, croscarmellose sodium, povidone, talc and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70518-2618-1</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (70518-2618-1) </PackageDescription>
<NDC11Code>70518-2618-01</NDC11Code>
<ProductNDC>70518-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200309</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205085</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carisoprodol tablets, USP is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol tablets, USP should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration [ see Dosage and Administration ( 2) ].</IndicationAndUsage>
<Description>Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is:. Other ingredients in the carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, maize starch, croscarmellose sodium, povidone, talc and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>71335-2618-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-2618-1) </PackageDescription>
<NDC11Code>71335-2618-01</NDC11Code>
<ProductNDC>71335-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206083</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure < 140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure < 90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure < 130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure < 80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>71335-2618-2</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-2618-2) </PackageDescription>
<NDC11Code>71335-2618-02</NDC11Code>
<ProductNDC>71335-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206083</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure < 140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure < 90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure < 130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure < 80 mmHg at Week 8. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>72162-2618-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (72162-2618-1) </PackageDescription>
<NDC11Code>72162-2618-01</NDC11Code>
<ProductNDC>72162-2618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propafenone Hydrochloride</ProprietaryName>
<NonProprietaryName>Propafenone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191025</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202445</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PROPAFENONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propafenone hydrochloride tablets are indicated to: 1 prolong the time to recurrence of paroxysmal atrial fibrillation/flutter (PAF) associated with disabling symptoms in patients without structural heart disease., 2 prolong the time to recurrence of paroxysmal supraventricular tachycardia (PSVT) associated with disabling symptoms in patients without structural heart disease., 3 treat documented ventricular arrhythmias, such as sustained ventricular tachycardia that, in the judgment of the physician, are life-threatening. Initiate treatment in the hospital.</IndicationAndUsage>
<Description>Propafenone hydrochloride is an antiarrhythmic drug supplied in film-coated tablets of 150 mg, 225 mg and 300 mg for oral administration. Propafenone has some structural similarities to beta-blocking agents. Chemically, propafenone hydrochloride is 2’-[2-hydroxy-3-(propylamino)-propoxy]-3-phenylpropiophenone hydrochloride, with a molecular weight of 377.92. The molecular formula is C21H27NO3HCl. The structural formula of propafenone hydrochloride is given below. Propafenone hydrochloride occurs as white crystalline powder. It is soluble in methanol and in hot water; slightly soluble in alcohol and in chloroform; very slightly soluble in acetone; insoluble in diethyl ether and in toluene. The following inactive ingredients are contained in the tablet: corn starch, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) </PackageDescription>
<NDC11Code>22840-0033-06</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) </PackageDescription>
<NDC11Code>22840-0033-08</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) </PackageDescription>
<NDC11Code>22840-0033-09</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0034-3) </PackageDescription>
<NDC11Code>22840-0034-03</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) </PackageDescription>
<NDC11Code>22840-0034-06</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) </PackageDescription>
<NDC11Code>22840-0034-08</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) </PackageDescription>
<NDC11Code>22840-0034-09</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
</NDCList>