{
"NDC": [
{
"NDCCode": "22840-3425-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-3425-1) ",
"NDC11Code": "22840-3425-01",
"ProductNDC": "22840-3425",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Orange Pollen",
"NonProprietaryName": "Citrus X Sinensis",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CITRUS SINENSIS POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "0093-3425-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0093-3425-01) ",
"NDC11Code": "00093-3425-01",
"ProductNDC": "0093-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072926",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211228",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium."
},
{
"NDCCode": "0093-3425-05",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (0093-3425-05) ",
"NDC11Code": "00093-3425-05",
"ProductNDC": "0093-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072926",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211105",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium."
},
{
"NDCCode": "0093-3425-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (0093-3425-10) ",
"NDC11Code": "00093-3425-10",
"ProductNDC": "0093-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072926",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211011",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium."
},
{
"NDCCode": "0406-3425-26",
"PackageDescription": "50 kg in 1 DRUM (0406-3425-26)",
"NDC11Code": "00406-3425-26",
"ProductNDC": "0406-3425",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Gadoversetamide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20140521",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SpecGx LLC",
"SubstanceName": "GADOVERSETAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "0469-3425-10",
"PackageDescription": "1 VIAL in 1 BOX (0469-3425-10) / 5 mL in 1 VIAL",
"NDC11Code": "00469-3425-10",
"ProductNDC": "0469-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vyloy",
"NonProprietaryName": "Zolbetuximab",
"DosageFormName": "INJECTION, POWDER, FOR SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241024",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761365",
"LabelerName": "Astellas Pharma US, Inc.",
"SubstanceName": "ZOLBETUXIMAB",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Claudin 18.2-directed Antibody Interactions [MoA], Claudin 18.2-directed Cytolytic Antibody [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241024",
"SamplePackage": "N",
"IndicationAndUsage": "VYLOY, in combination with fluoropyrimidine- and platinum-containing chemotherapy, is indicated for the first-line treatment of adults with locally advanced unresectable or metastatic human epidermal growth factor receptor 2 (HER2)‑negative gastric or gastroesophageal junction (GEJ) adenocarcinoma whose tumors are claudin (CLDN) 18.2 positive as determined by an FDA-approved test [see Dosage and Administration (2.1) and Clinical Studies (14)].",
"Description": "Zolbetuximab-clzb is a chimeric (mouse/human) antibody composed of variable regions derived from mouse anti-human claudin-18 isoform 2 monoclonal antibody and constant regions derived from human IgG1. The molecular weight is approximately 147 kDa. VYLOY (zolbetuximab-clzb) for injection is provided as a sterile, preservative-free, white to off-white lyophilized powder in single-dose vials for intravenous use. VYLOY is supplied as 100 mg or 300 mg per vial and requires reconstitution with Sterile Water for Injection, USP, (5 mL or 15 mL) resulting in a clear to slightly opalescent, colorless to slightly yellow solution with a final concentration of 20 mg/mL. Each mL of reconstituted solution contains 20 mg of zolbetuximab-clzb, arginine (23.24 mg), polysorbate 80 (0.21 mg), sucrose (51.30 mg), and phosphoric acid to adjust pH to 6.0."
},
{
"NDCCode": "0781-3425-80",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0781-3425-80) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00781-3425-80",
"ProductNDC": "0781-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190325",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203649",
"LabelerName": "Sandoz Inc",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2023-09-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190325",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil injection is a prostacyclin mimetic indicated for: 1 Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1), 2 Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20 mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-Hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1H-benz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is. Sterile Diluent for Treprostinil Injection is a high-pH (pH~10.4) glycine diluent supplied in a 50 mL single-dose vial containing 50 mL of Sterile Diluent for Treprostinil Injection. Each vial contains 94 mg glycine, 73.3 mg sodium chloride, sodium hydroxide (to adjust pH), and water for injection."
},
{
"NDCCode": "36987-3425-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-3425-1)",
"NDC11Code": "36987-3425-01",
"ProductNDC": "36987-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sheep Sorrel",
"NonProprietaryName": "Sheep Sorrel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RUMEX ACETOSELLA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-3425-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-3425-2)",
"NDC11Code": "36987-3425-02",
"ProductNDC": "36987-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sheep Sorrel",
"NonProprietaryName": "Sheep Sorrel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RUMEX ACETOSELLA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-3425-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-3425-3)",
"NDC11Code": "36987-3425-03",
"ProductNDC": "36987-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sheep Sorrel",
"NonProprietaryName": "Sheep Sorrel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RUMEX ACETOSELLA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-3425-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-3425-4)",
"NDC11Code": "36987-3425-04",
"ProductNDC": "36987-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sheep Sorrel",
"NonProprietaryName": "Sheep Sorrel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RUMEX ACETOSELLA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-3425-1",
"PackageDescription": "80 PELLET in 1 VIAL, GLASS (37662-3425-1) ",
"NDC11Code": "37662-3425-01",
"ProductNDC": "37662-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nitri Spiritus Dulcis",
"NonProprietaryName": "Nitri Spiritus Dulcis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230626",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ETHYL NITRITE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230626",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3425-2",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-3425-2) ",
"NDC11Code": "37662-3425-02",
"ProductNDC": "37662-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nitri Spiritus Dulcis",
"NonProprietaryName": "Nitri Spiritus Dulcis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230626",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ETHYL NITRITE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230626",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3425-3",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-3425-3) ",
"NDC11Code": "37662-3425-03",
"ProductNDC": "37662-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nitri Spiritus Dulcis",
"NonProprietaryName": "Nitri Spiritus Dulcis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230626",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ETHYL NITRITE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230626",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3425-4",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-3425-4) ",
"NDC11Code": "37662-3425-04",
"ProductNDC": "37662-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nitri Spiritus Dulcis",
"NonProprietaryName": "Nitri Spiritus Dulcis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230626",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ETHYL NITRITE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230626",
"SamplePackage": "N"
},
{
"NDCCode": "50090-3425-0",
"PackageDescription": "40 TABLET, FILM COATED in 1 BOTTLE (50090-3425-0) ",
"NDC11Code": "50090-3425-00",
"ProductNDC": "50090-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065435",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2024-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180330",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections– penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "50090-3425-1",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (50090-3425-1) ",
"NDC11Code": "50090-3425-01",
"ProductNDC": "50090-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065435",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2024-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240205",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections– penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "55154-3425-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-3425-0) > 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-3425-00",
"ProductNDC": "55154-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diovan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021283",
"LabelerName": "Cardinal Health",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-31",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-3425-2",
"PackageDescription": "8640 TABLET in 1 BOTTLE, PLASTIC (55154-3425-2)",
"NDC11Code": "55154-3425-02",
"ProductNDC": "55154-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diovan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021283",
"LabelerName": "Cardinal Health",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-31",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-3425-8",
"PackageDescription": "4680 TABLET in 1 BOTTLE, PLASTIC (55154-3425-8)",
"NDC11Code": "55154-3425-08",
"ProductNDC": "55154-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diovan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021283",
"LabelerName": "Cardinal Health",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-31",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "61957-3425-0",
"PackageDescription": "1 BOTTLE in 1 CARTON (61957-3425-0) / 30 mL in 1 BOTTLE",
"NDC11Code": "61957-3425-00",
"ProductNDC": "61957-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dior Forever Skin Wear Flawless Skin True Foundation Spf 20 3wp Warm Peach",
"NonProprietaryName": "Octisalate, Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Parfums Christian Dior",
"SubstanceName": "OCTISALATE; TITANIUM DIOXIDE",
"StrengthNumber": "35; 37.6",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260301",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "61957-3425-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (61957-3425-1) / 20 mL in 1 BOTTLE",
"NDC11Code": "61957-3425-01",
"ProductNDC": "61957-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dior Forever Skin Wear Flawless Skin True Foundation Spf 20 3wp Warm Peach",
"NonProprietaryName": "Octisalate, Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Parfums Christian Dior",
"SubstanceName": "OCTISALATE; TITANIUM DIOXIDE",
"StrengthNumber": "35; 37.6",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260301",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "68071-3425-9",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (68071-3425-9) ",
"NDC11Code": "68071-3425-09",
"ProductNDC": "68071-3425",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin",
"ProprietaryNameSuffix": "Low Dose",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of minor aches and pains or as recommended by your doctor.Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief."
},
{
"NDCCode": "68968-3425-8",
"PackageDescription": "8 POUCH in 1 CARTON (68968-3425-8) / 1 d in 1 POUCH",
"NDC11Code": "68968-3425-08",
"ProductNDC": "68968-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203752",
"LabelerName": "Noven Therapeutics, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "ESTRADIOL TRANSDERMAL SYSTEM is indicated for.",
"Description": "ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "70518-3425-0",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (70518-3425-0) ",
"NDC11Code": "70518-3425-00",
"ProductNDC": "70518-3425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077633",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220525",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine is indicated for. Epilepsy— adjunctive therapy in patients aged 2 years and older: 1 Partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome. ( 1.1) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine, USP is a white to pale cream-colored powder and has a pK aof 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Each lamotrigine tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 150 mg or 200 mg or 250 mg of lamotrigine. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Each lamotrigine tablets for oral suspension, USP intended for oral administration contains 5 mg or 25 mg of lamotrigine. In addition, each tablet contains the following inactive ingredients: aspartame, croscarmellose sodium, flavour black currant, magnesium stearate, mannitol, microcrystalline cellulose, silicon dioxide and tribasic calcium phosphate. Lamotrigine tablets, USP comply with USP Dissolution Test 3. Lamotrigine Tablets for Oral Suspension, USP comply with Organic Impurities Procedure 2."
},
{
"NDCCode": "22840-0033-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) ",
"NDC11Code": "22840-0033-06",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) ",
"NDC11Code": "22840-0033-08",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) ",
"NDC11Code": "22840-0033-09",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0034-3) ",
"NDC11Code": "22840-0034-03",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) ",
"NDC11Code": "22840-0034-06",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>22840-3425-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-3425-1) </PackageDescription>
<NDC11Code>22840-3425-01</NDC11Code>
<ProductNDC>22840-3425</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Orange Pollen</ProprietaryName>
<NonProprietaryName>Citrus X Sinensis</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CITRUS SINENSIS POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>0093-3425-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0093-3425-01) </PackageDescription>
<NDC11Code>00093-3425-01</NDC11Code>
<ProductNDC>0093-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072926</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>0093-3425-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (0093-3425-05) </PackageDescription>
<NDC11Code>00093-3425-05</NDC11Code>
<ProductNDC>0093-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072926</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>0093-3425-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (0093-3425-10) </PackageDescription>
<NDC11Code>00093-3425-10</NDC11Code>
<ProductNDC>0093-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072926</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are lactose monohydrate, magnesium stearate, microcrystalline cellulose, and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>0406-3425-26</NDCCode>
<PackageDescription>50 kg in 1 DRUM (0406-3425-26)</PackageDescription>
<NDC11Code>00406-3425-26</NDC11Code>
<ProductNDC>0406-3425</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Gadoversetamide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20140521</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SpecGx LLC</LabelerName>
<SubstanceName>GADOVERSETAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0469-3425-10</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (0469-3425-10) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00469-3425-10</NDC11Code>
<ProductNDC>0469-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vyloy</ProprietaryName>
<NonProprietaryName>Zolbetuximab</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241024</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761365</ApplicationNumber>
<LabelerName>Astellas Pharma US, Inc.</LabelerName>
<SubstanceName>ZOLBETUXIMAB</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Claudin 18.2-directed Antibody Interactions [MoA], Claudin 18.2-directed Cytolytic Antibody [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VYLOY, in combination with fluoropyrimidine- and platinum-containing chemotherapy, is indicated for the first-line treatment of adults with locally advanced unresectable or metastatic human epidermal growth factor receptor 2 (HER2)‑negative gastric or gastroesophageal junction (GEJ) adenocarcinoma whose tumors are claudin (CLDN) 18.2 positive as determined by an FDA-approved test [see Dosage and Administration (2.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Zolbetuximab-clzb is a chimeric (mouse/human) antibody composed of variable regions derived from mouse anti-human claudin-18 isoform 2 monoclonal antibody and constant regions derived from human IgG1. The molecular weight is approximately 147 kDa. VYLOY (zolbetuximab-clzb) for injection is provided as a sterile, preservative-free, white to off-white lyophilized powder in single-dose vials for intravenous use. VYLOY is supplied as 100 mg or 300 mg per vial and requires reconstitution with Sterile Water for Injection, USP, (5 mL or 15 mL) resulting in a clear to slightly opalescent, colorless to slightly yellow solution with a final concentration of 20 mg/mL. Each mL of reconstituted solution contains 20 mg of zolbetuximab-clzb, arginine (23.24 mg), polysorbate 80 (0.21 mg), sucrose (51.30 mg), and phosphoric acid to adjust pH to 6.0.</Description>
</NDC>
<NDC>
<NDCCode>0781-3425-80</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0781-3425-80) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00781-3425-80</NDC11Code>
<ProductNDC>0781-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190325</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203649</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil injection is a prostacyclin mimetic indicated for: 1 Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1), 2 Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20 mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-Hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1H-benz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is. Sterile Diluent for Treprostinil Injection is a high-pH (pH~10.4) glycine diluent supplied in a 50 mL single-dose vial containing 50 mL of Sterile Diluent for Treprostinil Injection. Each vial contains 94 mg glycine, 73.3 mg sodium chloride, sodium hydroxide (to adjust pH), and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>36987-3425-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-3425-1)</PackageDescription>
<NDC11Code>36987-3425-01</NDC11Code>
<ProductNDC>36987-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sheep Sorrel</ProprietaryName>
<NonProprietaryName>Sheep Sorrel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RUMEX ACETOSELLA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-3425-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-3425-2)</PackageDescription>
<NDC11Code>36987-3425-02</NDC11Code>
<ProductNDC>36987-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sheep Sorrel</ProprietaryName>
<NonProprietaryName>Sheep Sorrel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RUMEX ACETOSELLA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-3425-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-3425-3)</PackageDescription>
<NDC11Code>36987-3425-03</NDC11Code>
<ProductNDC>36987-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sheep Sorrel</ProprietaryName>
<NonProprietaryName>Sheep Sorrel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RUMEX ACETOSELLA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-3425-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-3425-4)</PackageDescription>
<NDC11Code>36987-3425-04</NDC11Code>
<ProductNDC>36987-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sheep Sorrel</ProprietaryName>
<NonProprietaryName>Sheep Sorrel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RUMEX ACETOSELLA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-3425-1</NDCCode>
<PackageDescription>80 PELLET in 1 VIAL, GLASS (37662-3425-1) </PackageDescription>
<NDC11Code>37662-3425-01</NDC11Code>
<ProductNDC>37662-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nitri Spiritus Dulcis</ProprietaryName>
<NonProprietaryName>Nitri Spiritus Dulcis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230626</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ETHYL NITRITE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3425-2</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-3425-2) </PackageDescription>
<NDC11Code>37662-3425-02</NDC11Code>
<ProductNDC>37662-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nitri Spiritus Dulcis</ProprietaryName>
<NonProprietaryName>Nitri Spiritus Dulcis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230626</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ETHYL NITRITE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3425-3</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-3425-3) </PackageDescription>
<NDC11Code>37662-3425-03</NDC11Code>
<ProductNDC>37662-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nitri Spiritus Dulcis</ProprietaryName>
<NonProprietaryName>Nitri Spiritus Dulcis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230626</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ETHYL NITRITE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3425-4</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-3425-4) </PackageDescription>
<NDC11Code>37662-3425-04</NDC11Code>
<ProductNDC>37662-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nitri Spiritus Dulcis</ProprietaryName>
<NonProprietaryName>Nitri Spiritus Dulcis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230626</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ETHYL NITRITE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-3425-0</NDCCode>
<PackageDescription>40 TABLET, FILM COATED in 1 BOTTLE (50090-3425-0) </PackageDescription>
<NDC11Code>50090-3425-00</NDC11Code>
<ProductNDC>50090-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065435</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections– penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-3425-1</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (50090-3425-1) </PackageDescription>
<NDC11Code>50090-3425-01</NDC11Code>
<ProductNDC>50090-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065435</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections– penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis). Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association1.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-3425-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-3425-0) > 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-3425-00</NDC11Code>
<ProductNDC>55154-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diovan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021283</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-31</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-3425-2</NDCCode>
<PackageDescription>8640 TABLET in 1 BOTTLE, PLASTIC (55154-3425-2)</PackageDescription>
<NDC11Code>55154-3425-02</NDC11Code>
<ProductNDC>55154-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diovan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021283</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-31</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-3425-8</NDCCode>
<PackageDescription>4680 TABLET in 1 BOTTLE, PLASTIC (55154-3425-8)</PackageDescription>
<NDC11Code>55154-3425-08</NDC11Code>
<ProductNDC>55154-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diovan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021283</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-31</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61957-3425-0</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (61957-3425-0) / 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>61957-3425-00</NDC11Code>
<ProductNDC>61957-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dior Forever Skin Wear Flawless Skin True Foundation Spf 20 3wp Warm Peach</ProprietaryName>
<NonProprietaryName>Octisalate, Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Parfums Christian Dior</LabelerName>
<SubstanceName>OCTISALATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>35; 37.6</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>61957-3425-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (61957-3425-1) / 20 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>61957-3425-01</NDC11Code>
<ProductNDC>61957-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dior Forever Skin Wear Flawless Skin True Foundation Spf 20 3wp Warm Peach</ProprietaryName>
<NonProprietaryName>Octisalate, Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Parfums Christian Dior</LabelerName>
<SubstanceName>OCTISALATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>35; 37.6</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures ( see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68071-3425-9</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (68071-3425-9) </PackageDescription>
<NDC11Code>68071-3425-09</NDC11Code>
<ProductNDC>68071-3425</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin</ProprietaryName>
<ProprietaryNameSuffix>Low Dose</ProprietaryNameSuffix>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of minor aches and pains or as recommended by your doctor.Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68968-3425-8</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (68968-3425-8) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>68968-3425-08</NDC11Code>
<ProductNDC>68968-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203752</ApplicationNumber>
<LabelerName>Noven Therapeutics, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ESTRADIOL TRANSDERMAL SYSTEM is indicated for.</IndicationAndUsage>
<Description>ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H24O2. The molecular weight is 272.39. ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>70518-3425-0</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (70518-3425-0) </PackageDescription>
<NDC11Code>70518-3425-00</NDC11Code>
<ProductNDC>70518-3425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077633</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220525</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine is indicated for. Epilepsy— adjunctive therapy in patients aged 2 years and older: 1 Partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome. ( 1.1) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine, USP is a white to pale cream-colored powder and has a pK aof 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Each lamotrigine tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 150 mg or 200 mg or 250 mg of lamotrigine. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Each lamotrigine tablets for oral suspension, USP intended for oral administration contains 5 mg or 25 mg of lamotrigine. In addition, each tablet contains the following inactive ingredients: aspartame, croscarmellose sodium, flavour black currant, magnesium stearate, mannitol, microcrystalline cellulose, silicon dioxide and tribasic calcium phosphate. Lamotrigine tablets, USP comply with USP Dissolution Test 3. Lamotrigine Tablets for Oral Suspension, USP comply with Organic Impurities Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) </PackageDescription>
<NDC11Code>22840-0033-06</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) </PackageDescription>
<NDC11Code>22840-0033-08</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) </PackageDescription>
<NDC11Code>22840-0033-09</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0034-3) </PackageDescription>
<NDC11Code>22840-0034-03</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) </PackageDescription>
<NDC11Code>22840-0034-06</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
</NDCList>