{
"NDC": [
{
"NDCCode": "22840-3485-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-3485-1) ",
"NDC11Code": "22840-3485-01",
"ProductNDC": "22840-3485",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Sweetgum Pollen",
"NonProprietaryName": "Liquidambar Styraciflua",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "LIQUIDAMBAR STYRACIFLUA POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "0781-3485-95",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0781-3485-95) / 2.5 mL in 1 VIAL, SINGLE-DOSE (0781-3485-56) ",
"NDC11Code": "00781-3485-95",
"ProductNDC": "0781-3485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iron Sucrose",
"NonProprietaryName": "Iron Sucrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212340",
"LabelerName": "Sandoz Inc",
"SubstanceName": "IRON SUCROSE",
"StrengthNumber": "50",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250922",
"SamplePackage": "N",
"IndicationAndUsage": "Iron sucrose injection is indicated for the treatment of iron deficiency anemia (IDA) in patients with chronic kidney disease (CKD).",
"Description": "Iron sucrose injection, USP, an iron replacement product, is a brown, sterile, aqueous, complex of polynuclear iron (III)-hydroxide in sucrose for intravenous use. Iron sucrose injection has a molecular weight of approximately 34,000 to 60,000 daltons and a proposed structural formula:. [Na2Fe5O8(OH) ·3(H2O)]n ·m(C12H22O11) where: n is the degree of iron polymerization and m is the number of sucrose molecules associated with the iron (III)-hydroxide. Each mL contains 20 mg elemental iron as iron sucrose in water for injection. Iron sucrose injection is available in 10 mL single-dose vials (200 mg elemental iron per 10 mL), 5 mL single-dose vials (100 mg elemental iron per 5 mL), and 2.5 mL single-dose vials (50 mg elemental iron per 2.5 mL). The drug product contains approximately 30% sucrose w/v (300 mg/mL) and sodium chloride for tonicity. Sodium hydroxide may be added to adjust pH to 10.5 to 11.1. The product contains no preservatives. The osmolarity of the injection is 1,250 mOsmol/L."
},
{
"NDCCode": "0781-3485-96",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (0781-3485-96) / 2.5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00781-3485-96",
"ProductNDC": "0781-3485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iron Sucrose",
"NonProprietaryName": "Iron Sucrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212340",
"LabelerName": "Sandoz Inc",
"SubstanceName": "IRON SUCROSE",
"StrengthNumber": "50",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250922",
"SamplePackage": "N",
"IndicationAndUsage": "Iron sucrose injection is indicated for the treatment of iron deficiency anemia (IDA) in patients with chronic kidney disease (CKD).",
"Description": "Iron sucrose injection, USP, an iron replacement product, is a brown, sterile, aqueous, complex of polynuclear iron (III)-hydroxide in sucrose for intravenous use. Iron sucrose injection has a molecular weight of approximately 34,000 to 60,000 daltons and a proposed structural formula:. [Na2Fe5O8(OH) ·3(H2O)]n ·m(C12H22O11) where: n is the degree of iron polymerization and m is the number of sucrose molecules associated with the iron (III)-hydroxide. Each mL contains 20 mg elemental iron as iron sucrose in water for injection. Iron sucrose injection is available in 10 mL single-dose vials (200 mg elemental iron per 10 mL), 5 mL single-dose vials (100 mg elemental iron per 5 mL), and 2.5 mL single-dose vials (50 mg elemental iron per 2.5 mL). The drug product contains approximately 30% sucrose w/v (300 mg/mL) and sodium chloride for tonicity. Sodium hydroxide may be added to adjust pH to 10.5 to 11.1. The product contains no preservatives. The osmolarity of the injection is 1,250 mOsmol/L."
},
{
"NDCCode": "37662-3485-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-3485-1) ",
"NDC11Code": "37662-3485-01",
"ProductNDC": "37662-3485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aesculus Hippocastanum",
"NonProprietaryName": "Aesculus Hippocastanum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "HORSE CHESTNUT",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3485-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-3485-2) ",
"NDC11Code": "37662-3485-02",
"ProductNDC": "37662-3485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aesculus Hippocastanum",
"NonProprietaryName": "Aesculus Hippocastanum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "HORSE CHESTNUT",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3485-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-3485-3) ",
"NDC11Code": "37662-3485-03",
"ProductNDC": "37662-3485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aesculus Hippocastanum",
"NonProprietaryName": "Aesculus Hippocastanum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "HORSE CHESTNUT",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "37662-3485-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-3485-4) ",
"NDC11Code": "37662-3485-04",
"ProductNDC": "37662-3485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aesculus Hippocastanum",
"NonProprietaryName": "Aesculus Hippocastanum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "HORSE CHESTNUT",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "50090-3485-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-3485-0) ",
"NDC11Code": "50090-3485-00",
"ProductNDC": "50090-3485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180618",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "68071-3485-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68071-3485-3) ",
"NDC11Code": "68071-3485-03",
"ProductNDC": "68071-3485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benazepril Hydrochloride",
"NonProprietaryName": "Benazepril Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078212",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230818",
"SamplePackage": "N",
"IndicationAndUsage": "Benazepril hydrochloride tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mm Hg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in Black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with thiazide diuretics.",
"Description": "Benazepril hydrochloride, USP is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Its chemical name is benazepril 3-[[1-(ethoxy-carbonyl)-3-phenyl-(1S)-propyl] amino]-2,3,4,5-tetrahydro-2-oxo-1 H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C 24H 28N 2O 5HCl and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a non-sulfhydryl angiotensin-converting enzyme inhibitor. Benazepril hydrochloride is supplied as tablets containing 10 mg, 20 mg and 40 mg of benazepril hydrochloride USP for oral administration. The inactive ingredients are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, polysorbate 80, pregelatinized starch (maize) and titanium dioxide. In addition, the 10 mg contains iron oxide yellow and 20 mg and 40 mg contains iron oxide red. Meets USP Dissolution Test 2."
},
{
"NDCCode": "70518-3485-0",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (70518-3485-0) ",
"NDC11Code": "70518-3485-00",
"ProductNDC": "70518-3485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073556",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220819",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride, USP is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5 H-dibenzo [ a,d]cyclohepten-5-ylidene)- N-methyl-, hydrochloride. The structural formula is as follows:. Nortriptyline Hydrochloride Capsules, USP (equivalent to 10 mg, 25 mg, 50 mg and 75 mg Nortriptyline), for oral administration, contain the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, pregelatinized starch and sodium lauryl sulfate. The 10 mg, 25 mg, 50 mg and 75 mg capsule shells contain: gelatin, methylparaben, propylparaben, sodium lauryl sulfate and titanium dioxide. They may also contain: benzyl alcohol, butylparaben, edetate calcium disodium, silicon dioxide or sodium propionate. The 10 mg, 25 mg and 75 mg capsule shells also contain D&C Yellow No. 10 and FD&C Blue No. 1."
},
{
"NDCCode": "74539-012-01",
"PackageDescription": "3485.4 mL in 1 BOTTLE (74539-012-01) ",
"NDC11Code": "74539-0012-01",
"ProductNDC": "74539-012",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200410",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Current Lighting Solutions, LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-12-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200410",
"SamplePackage": "N"
},
{
"NDCCode": "22840-0033-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) ",
"NDC11Code": "22840-0033-06",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) ",
"NDC11Code": "22840-0033-08",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) ",
"NDC11Code": "22840-0033-09",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0034-3) ",
"NDC11Code": "22840-0034-03",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) ",
"NDC11Code": "22840-0034-06",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) ",
"NDC11Code": "22840-0034-08",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) ",
"NDC11Code": "22840-0034-09",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0035-6) ",
"NDC11Code": "22840-0035-06",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0035-8) ",
"NDC11Code": "22840-0035-08",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0035-9) ",
"NDC11Code": "22840-0035-09",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0036-3) ",
"NDC11Code": "22840-0036-03",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0036-6) ",
"NDC11Code": "22840-0036-06",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0036-8) ",
"NDC11Code": "22840-0036-08",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0036-9) ",
"NDC11Code": "22840-0036-09",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0037-3) ",
"NDC11Code": "22840-0037-03",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0037-6) ",
"NDC11Code": "22840-0037-06",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0037-8) ",
"NDC11Code": "22840-0037-08",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0037-9) ",
"NDC11Code": "22840-0037-09",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0038-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0038-6) ",
"NDC11Code": "22840-0038-06",
"ProductNDC": "22840-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "30000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>22840-3485-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-3485-1) </PackageDescription>
<NDC11Code>22840-3485-01</NDC11Code>
<ProductNDC>22840-3485</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Sweetgum Pollen</ProprietaryName>
<NonProprietaryName>Liquidambar Styraciflua</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>LIQUIDAMBAR STYRACIFLUA POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>0781-3485-95</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0781-3485-95) / 2.5 mL in 1 VIAL, SINGLE-DOSE (0781-3485-56) </PackageDescription>
<NDC11Code>00781-3485-95</NDC11Code>
<ProductNDC>0781-3485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iron Sucrose</ProprietaryName>
<NonProprietaryName>Iron Sucrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212340</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>IRON SUCROSE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iron sucrose injection is indicated for the treatment of iron deficiency anemia (IDA) in patients with chronic kidney disease (CKD).</IndicationAndUsage>
<Description>Iron sucrose injection, USP, an iron replacement product, is a brown, sterile, aqueous, complex of polynuclear iron (III)-hydroxide in sucrose for intravenous use. Iron sucrose injection has a molecular weight of approximately 34,000 to 60,000 daltons and a proposed structural formula:. [Na2Fe5O8(OH) ·3(H2O)]n ·m(C12H22O11) where: n is the degree of iron polymerization and m is the number of sucrose molecules associated with the iron (III)-hydroxide. Each mL contains 20 mg elemental iron as iron sucrose in water for injection. Iron sucrose injection is available in 10 mL single-dose vials (200 mg elemental iron per 10 mL), 5 mL single-dose vials (100 mg elemental iron per 5 mL), and 2.5 mL single-dose vials (50 mg elemental iron per 2.5 mL). The drug product contains approximately 30% sucrose w/v (300 mg/mL) and sodium chloride for tonicity. Sodium hydroxide may be added to adjust pH to 10.5 to 11.1. The product contains no preservatives. The osmolarity of the injection is 1,250 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0781-3485-96</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (0781-3485-96) / 2.5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00781-3485-96</NDC11Code>
<ProductNDC>0781-3485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iron Sucrose</ProprietaryName>
<NonProprietaryName>Iron Sucrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212340</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>IRON SUCROSE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iron sucrose injection is indicated for the treatment of iron deficiency anemia (IDA) in patients with chronic kidney disease (CKD).</IndicationAndUsage>
<Description>Iron sucrose injection, USP, an iron replacement product, is a brown, sterile, aqueous, complex of polynuclear iron (III)-hydroxide in sucrose for intravenous use. Iron sucrose injection has a molecular weight of approximately 34,000 to 60,000 daltons and a proposed structural formula:. [Na2Fe5O8(OH) ·3(H2O)]n ·m(C12H22O11) where: n is the degree of iron polymerization and m is the number of sucrose molecules associated with the iron (III)-hydroxide. Each mL contains 20 mg elemental iron as iron sucrose in water for injection. Iron sucrose injection is available in 10 mL single-dose vials (200 mg elemental iron per 10 mL), 5 mL single-dose vials (100 mg elemental iron per 5 mL), and 2.5 mL single-dose vials (50 mg elemental iron per 2.5 mL). The drug product contains approximately 30% sucrose w/v (300 mg/mL) and sodium chloride for tonicity. Sodium hydroxide may be added to adjust pH to 10.5 to 11.1. The product contains no preservatives. The osmolarity of the injection is 1,250 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>37662-3485-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-3485-1) </PackageDescription>
<NDC11Code>37662-3485-01</NDC11Code>
<ProductNDC>37662-3485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aesculus Hippocastanum</ProprietaryName>
<NonProprietaryName>Aesculus Hippocastanum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>HORSE CHESTNUT</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3485-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-3485-2) </PackageDescription>
<NDC11Code>37662-3485-02</NDC11Code>
<ProductNDC>37662-3485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aesculus Hippocastanum</ProprietaryName>
<NonProprietaryName>Aesculus Hippocastanum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>HORSE CHESTNUT</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3485-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-3485-3) </PackageDescription>
<NDC11Code>37662-3485-03</NDC11Code>
<ProductNDC>37662-3485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aesculus Hippocastanum</ProprietaryName>
<NonProprietaryName>Aesculus Hippocastanum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>HORSE CHESTNUT</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-3485-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-3485-4) </PackageDescription>
<NDC11Code>37662-3485-04</NDC11Code>
<ProductNDC>37662-3485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aesculus Hippocastanum</ProprietaryName>
<NonProprietaryName>Aesculus Hippocastanum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>HORSE CHESTNUT</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-3485-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-3485-0) </PackageDescription>
<NDC11Code>50090-3485-00</NDC11Code>
<ProductNDC>50090-3485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>68071-3485-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68071-3485-3) </PackageDescription>
<NDC11Code>68071-3485-03</NDC11Code>
<ProductNDC>68071-3485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078212</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Benazepril hydrochloride tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mm Hg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in Black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with thiazide diuretics.</IndicationAndUsage>
<Description>Benazepril hydrochloride, USP is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Its chemical name is benazepril 3-[[1-(ethoxy-carbonyl)-3-phenyl-(1S)-propyl] amino]-2,3,4,5-tetrahydro-2-oxo-1 H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C 24H 28N 2O 5HCl and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a non-sulfhydryl angiotensin-converting enzyme inhibitor. Benazepril hydrochloride is supplied as tablets containing 10 mg, 20 mg and 40 mg of benazepril hydrochloride USP for oral administration. The inactive ingredients are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, polysorbate 80, pregelatinized starch (maize) and titanium dioxide. In addition, the 10 mg contains iron oxide yellow and 20 mg and 40 mg contains iron oxide red. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>70518-3485-0</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (70518-3485-0) </PackageDescription>
<NDC11Code>70518-3485-00</NDC11Code>
<ProductNDC>70518-3485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073556</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride, USP is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5 H-dibenzo [ a,d]cyclohepten-5-ylidene)- N-methyl-, hydrochloride. The structural formula is as follows:. Nortriptyline Hydrochloride Capsules, USP (equivalent to 10 mg, 25 mg, 50 mg and 75 mg Nortriptyline), for oral administration, contain the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, pregelatinized starch and sodium lauryl sulfate. The 10 mg, 25 mg, 50 mg and 75 mg capsule shells contain: gelatin, methylparaben, propylparaben, sodium lauryl sulfate and titanium dioxide. They may also contain: benzyl alcohol, butylparaben, edetate calcium disodium, silicon dioxide or sodium propionate. The 10 mg, 25 mg and 75 mg capsule shells also contain D&C Yellow No. 10 and FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>74539-012-01</NDCCode>
<PackageDescription>3485.4 mL in 1 BOTTLE (74539-012-01) </PackageDescription>
<NDC11Code>74539-0012-01</NDC11Code>
<ProductNDC>74539-012</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200410</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Current Lighting Solutions, LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>22840-0033-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) </PackageDescription>
<NDC11Code>22840-0033-06</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) </PackageDescription>
<NDC11Code>22840-0033-08</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) </PackageDescription>
<NDC11Code>22840-0033-09</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0034-3) </PackageDescription>
<NDC11Code>22840-0034-03</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) </PackageDescription>
<NDC11Code>22840-0034-06</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) </PackageDescription>
<NDC11Code>22840-0034-08</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) </PackageDescription>
<NDC11Code>22840-0034-09</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0035-6) </PackageDescription>
<NDC11Code>22840-0035-06</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0035-8) </PackageDescription>
<NDC11Code>22840-0035-08</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0035-9) </PackageDescription>
<NDC11Code>22840-0035-09</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0036-3) </PackageDescription>
<NDC11Code>22840-0036-03</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0036-6) </PackageDescription>
<NDC11Code>22840-0036-06</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0036-8) </PackageDescription>
<NDC11Code>22840-0036-08</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0036-9) </PackageDescription>
<NDC11Code>22840-0036-09</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0037-3) </PackageDescription>
<NDC11Code>22840-0037-03</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0037-6) </PackageDescription>
<NDC11Code>22840-0037-06</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0037-8) </PackageDescription>
<NDC11Code>22840-0037-08</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0037-9) </PackageDescription>
<NDC11Code>22840-0037-09</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0038-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0038-6) </PackageDescription>
<NDC11Code>22840-0038-06</NDC11Code>
<ProductNDC>22840-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>30000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
</NDCList>