{
"NDC": [
{
"NDCCode": "22840-9639-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-9639-1) ",
"NDC11Code": "22840-9639-01",
"ProductNDC": "22840-9639",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Fusarium Mix",
"NonProprietaryName": "Gibberella Fujikuroi And Fusarium Solani",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "HAEMATONECTRIA HAEMATOCOCCA; GIBBERELLA FUJIKUROI",
"StrengthNumber": ".0005; .0005",
"StrengthUnit": "g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "0338-9639-01",
"PackageDescription": "4 mL in 1 SYRINGE, PLASTIC (0338-9639-01) ",
"NDC11Code": "00338-9639-01",
"ProductNDC": "0338-9639",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Artiss",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080319",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125266",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FIBRINOGEN HUMAN; HUMAN THROMBIN",
"StrengthNumber": "86.5; 4",
"StrengthUnit": "mg/mL; [iU]/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080319",
"SamplePackage": "N",
"IndicationAndUsage": "ARTISS is a fibrin sealant indicated in adult and pediatric patients to: 1 Adhere autologous skin grafts to surgically prepared wound beds resulting from burns., 2 Adhere tissue flaps during facial rhytidectomy surgery.",
"Description": "ARTISS [Fibrin Sealant (Human)] is a two-component fibrin sealant made from pooled human plasma. Sealer Protein SolutionTotal protein: 96 -125 mg/mLFibrinogen: 67 - 106 mg/mLFibrinolysis Inhibitor, Aprotinin (Synthetic): 2250 - 3750 Kallidinogenase Inhibiting Unit/mL. Other ingredients include: Human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection (WFI). Thrombin SolutionThrombin (Human): 2.5 - 6.5 units/mL1Calcium Chloride: 36 - 44 µmol/mLOther ingredients include: Human albumin, sodium chloride and water for injection (WFI). 1 The potency expressed in units is determined using a clotting assay against an internal reference standard for potency that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit is equivalent to an International Unit (IU). Sealer Protein (Human). Sealer Protein (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (1). The active ingredient in Sealer Protein (Human) is fibrinogen. A Fibrinolysis Inhibitor, Aprotinin (Synthetic) is included in the Sealer Protein (Human) component to delay fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human). Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (2). Sealer Protein (Human) and Thrombin (Human) are made from pooled human plasma collected at U.S. licensed collection centers. The vapor heat and solvent/detergent treatment steps used in the manufacturing process have been shown to be capable of significant viral reduction. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma [see Viral Clearance below and Warnings and Precautions (5.4)]. Viral Clearance. The manufacturing procedure includes processing steps designed to further reduce the risk of viral transmission. In particular, vapor heating and solvent/detergent treatment processes are included in the manufacturing of Sealer Protein and Thrombin. Validation studies were conducted using samples drawn from manufacturing intermediates for each of the two human plasma derived components. These samples were spiked with stock virus suspensions of known titers followed by further processing under conditions equivalent to those in the respective manufacturing steps. The stock virus suspensions represent HIV-1, BVDV, PRV, HAV and MMV (Human Parvovirus B19). The virus reduction factors (expressed as log10) of independent manufacturing steps are shown in Table 5 for each of the viruses tested. Table 5: Mean Reduction Factors [log10] for Virus Removal and/or Inactivation. Sealer Protein Component. Thrombin Component. In addition, Human Parvovirus B19 was used to investigate the upstream Thrombin precursor mass capture step, the Sealer Protein early manufacturing steps and the Thrombin and Sealer Protein vapor heating steps. Using quantitative PCR assays, the estimated log reduction factors obtained were 1.7 and 3.4 for the Thrombin precursor mass capture step and Sealer Protein early manufacturing steps and >4 / 1.0 for the Thrombin / Sealer Protein vapor heating steps, respectively."
},
{
"NDCCode": "0378-9639-43",
"PackageDescription": "2.5 mL in 1 VIAL, MULTI-DOSE (0378-9639-43) ",
"NDC11Code": "00378-9639-43",
"ProductNDC": "0378-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butorphanol Tartrate",
"NonProprietaryName": "Butorphanol Tartrate",
"DosageFormName": "SPRAY",
"RouteName": "NASAL",
"StartMarketingDate": "20110121",
"EndMarketingDate": "20211031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075759",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "BUTORPHANOL TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Competitive Opioid Antagonists [MoA],Opioid Agonist/Antagonist [EPC],Partial Opioid Agonists [MoA]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2021-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110121",
"EndMarketingDatePackage": "20211031",
"SamplePackage": "N"
},
{
"NDCCode": "63083-9639-1",
"PackageDescription": "29.5 mL in 1 BOTTLE, DROPPER (63083-9639-1) ",
"NDC11Code": "63083-9639-01",
"ProductNDC": "63083-9639",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cervical 12x",
"ProprietaryNameSuffix": "9639",
"NonProprietaryName": "Cervical 12x",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "19840815",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Professional Complementary Health Formulas",
"SubstanceName": "BOS TAURUS BONE MARROW",
"StrengthNumber": "12",
"StrengthUnit": "[hp_X]/29.5mL",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19850815",
"SamplePackage": "N"
},
{
"NDCCode": "71335-9639-0",
"PackageDescription": "3 TABLET, FILM COATED in 1 BOTTLE (71335-9639-0) ",
"NDC11Code": "71335-9639-00",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-9639-1) ",
"NDC11Code": "71335-9639-01",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-2",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (71335-9639-2) ",
"NDC11Code": "71335-9639-02",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-3",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (71335-9639-3) ",
"NDC11Code": "71335-9639-03",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-4",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-9639-4) ",
"NDC11Code": "71335-9639-04",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-5",
"PackageDescription": "16 TABLET, FILM COATED in 1 BOTTLE (71335-9639-5) ",
"NDC11Code": "71335-9639-05",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-6",
"PackageDescription": "8 TABLET, FILM COATED in 1 BOTTLE (71335-9639-6) ",
"NDC11Code": "71335-9639-06",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-7",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (71335-9639-7) ",
"NDC11Code": "71335-9639-07",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-8",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (71335-9639-8) ",
"NDC11Code": "71335-9639-08",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-9639-9",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (71335-9639-9) ",
"NDC11Code": "71335-9639-09",
"ProductNDC": "71335-9639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210616",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "22840-0033-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) ",
"NDC11Code": "22840-0033-06",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) ",
"NDC11Code": "22840-0033-08",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0033-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) ",
"NDC11Code": "22840-0033-09",
"ProductNDC": "22840-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0034-3) ",
"NDC11Code": "22840-0034-03",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) ",
"NDC11Code": "22840-0034-06",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) ",
"NDC11Code": "22840-0034-08",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0034-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) ",
"NDC11Code": "22840-0034-09",
"ProductNDC": "22840-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Farinae",
"NonProprietaryName": "Dermatophagoides Farinae",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19870202",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0035-6) ",
"NDC11Code": "22840-0035-06",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0035-8) ",
"NDC11Code": "22840-0035-08",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0035-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0035-9) ",
"NDC11Code": "22840-0035-09",
"ProductNDC": "22840-0035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0036-3) ",
"NDC11Code": "22840-0036-03",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0036-6) ",
"NDC11Code": "22840-0036-06",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-8",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (22840-0036-8) ",
"NDC11Code": "22840-0036-08",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0036-9",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-0036-9) ",
"NDC11Code": "22840-0036-09",
"ProductNDC": "22840-0036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101835",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890627",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-3",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-0037-3) ",
"NDC11Code": "22840-0037-03",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
},
{
"NDCCode": "22840-0037-6",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-0037-6) ",
"NDC11Code": "22840-0037-06",
"ProductNDC": "22840-0037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"NonProprietaryName": "Dermatophagoides Farinae And Dermatophagoides Pteronyssinus",
"DosageFormName": "CONCENTRATE",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101834",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS",
"StrengthNumber": "5000; 5000",
"StrengthUnit": "[AU]/mL; [AU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.",
"Description": "Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>22840-9639-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-9639-1) </PackageDescription>
<NDC11Code>22840-9639-01</NDC11Code>
<ProductNDC>22840-9639</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Fusarium Mix</ProprietaryName>
<NonProprietaryName>Gibberella Fujikuroi And Fusarium Solani</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>HAEMATONECTRIA HAEMATOCOCCA; GIBBERELLA FUJIKUROI</SubstanceName>
<StrengthNumber>.0005; .0005</StrengthNumber>
<StrengthUnit>g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0338-9639-01</NDCCode>
<PackageDescription>4 mL in 1 SYRINGE, PLASTIC (0338-9639-01) </PackageDescription>
<NDC11Code>00338-9639-01</NDC11Code>
<ProductNDC>0338-9639</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Artiss</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080319</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125266</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
<StrengthNumber>86.5; 4</StrengthNumber>
<StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARTISS is a fibrin sealant indicated in adult and pediatric patients to: 1 Adhere autologous skin grafts to surgically prepared wound beds resulting from burns., 2 Adhere tissue flaps during facial rhytidectomy surgery.</IndicationAndUsage>
<Description>ARTISS [Fibrin Sealant (Human)] is a two-component fibrin sealant made from pooled human plasma. Sealer Protein SolutionTotal protein: 96 -125 mg/mLFibrinogen: 67 - 106 mg/mLFibrinolysis Inhibitor, Aprotinin (Synthetic): 2250 - 3750 Kallidinogenase Inhibiting Unit/mL. Other ingredients include: Human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection (WFI). Thrombin SolutionThrombin (Human): 2.5 - 6.5 units/mL1Calcium Chloride: 36 - 44 µmol/mLOther ingredients include: Human albumin, sodium chloride and water for injection (WFI). 1 The potency expressed in units is determined using a clotting assay against an internal reference standard for potency that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit is equivalent to an International Unit (IU). Sealer Protein (Human). Sealer Protein (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (1). The active ingredient in Sealer Protein (Human) is fibrinogen. A Fibrinolysis Inhibitor, Aprotinin (Synthetic) is included in the Sealer Protein (Human) component to delay fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human). Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is provided as a frozen liquid solution pre-filled into one side of a dual-chambered syringe (2). Sealer Protein (Human) and Thrombin (Human) are made from pooled human plasma collected at U.S. licensed collection centers. The vapor heat and solvent/detergent treatment steps used in the manufacturing process have been shown to be capable of significant viral reduction. No procedure, however, has been shown to be completely effective in removing viral infectivity from derivatives of human plasma [see Viral Clearance below and Warnings and Precautions (5.4)]. Viral Clearance. The manufacturing procedure includes processing steps designed to further reduce the risk of viral transmission. In particular, vapor heating and solvent/detergent treatment processes are included in the manufacturing of Sealer Protein and Thrombin. Validation studies were conducted using samples drawn from manufacturing intermediates for each of the two human plasma derived components. These samples were spiked with stock virus suspensions of known titers followed by further processing under conditions equivalent to those in the respective manufacturing steps. The stock virus suspensions represent HIV-1, BVDV, PRV, HAV and MMV (Human Parvovirus B19). The virus reduction factors (expressed as log10) of independent manufacturing steps are shown in Table 5 for each of the viruses tested. Table 5: Mean Reduction Factors [log10] for Virus Removal and/or Inactivation. Sealer Protein Component. Thrombin Component. In addition, Human Parvovirus B19 was used to investigate the upstream Thrombin precursor mass capture step, the Sealer Protein early manufacturing steps and the Thrombin and Sealer Protein vapor heating steps. Using quantitative PCR assays, the estimated log reduction factors obtained were 1.7 and 3.4 for the Thrombin precursor mass capture step and Sealer Protein early manufacturing steps and >4 / 1.0 for the Thrombin / Sealer Protein vapor heating steps, respectively.</Description>
</NDC>
<NDC>
<NDCCode>0378-9639-43</NDCCode>
<PackageDescription>2.5 mL in 1 VIAL, MULTI-DOSE (0378-9639-43) </PackageDescription>
<NDC11Code>00378-9639-43</NDC11Code>
<ProductNDC>0378-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butorphanol Tartrate</ProprietaryName>
<NonProprietaryName>Butorphanol Tartrate</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20110121</StartMarketingDate>
<EndMarketingDate>20211031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075759</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUTORPHANOL TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Competitive Opioid Antagonists [MoA],Opioid Agonist/Antagonist [EPC],Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110121</StartMarketingDatePackage>
<EndMarketingDatePackage>20211031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63083-9639-1</NDCCode>
<PackageDescription>29.5 mL in 1 BOTTLE, DROPPER (63083-9639-1) </PackageDescription>
<NDC11Code>63083-9639-01</NDC11Code>
<ProductNDC>63083-9639</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cervical 12x</ProprietaryName>
<ProprietaryNameSuffix>9639</ProprietaryNameSuffix>
<NonProprietaryName>Cervical 12x</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840815</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Professional Complementary Health Formulas</LabelerName>
<SubstanceName>BOS TAURUS BONE MARROW</SubstanceName>
<StrengthNumber>12</StrengthNumber>
<StrengthUnit>[hp_X]/29.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19850815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-9639-0</NDCCode>
<PackageDescription>3 TABLET, FILM COATED in 1 BOTTLE (71335-9639-0) </PackageDescription>
<NDC11Code>71335-9639-00</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-9639-1) </PackageDescription>
<NDC11Code>71335-9639-01</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-2</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (71335-9639-2) </PackageDescription>
<NDC11Code>71335-9639-02</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-3</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (71335-9639-3) </PackageDescription>
<NDC11Code>71335-9639-03</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-4</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-9639-4) </PackageDescription>
<NDC11Code>71335-9639-04</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-5</NDCCode>
<PackageDescription>16 TABLET, FILM COATED in 1 BOTTLE (71335-9639-5) </PackageDescription>
<NDC11Code>71335-9639-05</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-6</NDCCode>
<PackageDescription>8 TABLET, FILM COATED in 1 BOTTLE (71335-9639-6) </PackageDescription>
<NDC11Code>71335-9639-06</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-7</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (71335-9639-7) </PackageDescription>
<NDC11Code>71335-9639-07</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-8</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (71335-9639-8) </PackageDescription>
<NDC11Code>71335-9639-08</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-9639-9</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (71335-9639-9) </PackageDescription>
<NDC11Code>71335-9639-09</NDC11Code>
<ProductNDC>71335-9639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210616</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets, USP and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult PatientsKetorolac tromethamine tablets are indicated for the short-term (≤ 5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with ketorolac tromethamine-IV or IM and ketorolac tromethamine tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine-IV/IM and ketorolac tromethamine tablets is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablet therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1H- pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is. C15H13NO3 C4H11NO3. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80, shellac glaze, isopropyl alcohol, black iron oxide, N-butyl alcohol, propylene glycol and ammonium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0033-6) </PackageDescription>
<NDC11Code>22840-0033-06</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0033-8) </PackageDescription>
<NDC11Code>22840-0033-08</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0033-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0033-9) </PackageDescription>
<NDC11Code>22840-0033-09</NDC11Code>
<ProductNDC>22840-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0034-3) </PackageDescription>
<NDC11Code>22840-0034-03</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0034-6) </PackageDescription>
<NDC11Code>22840-0034-06</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0034-8) </PackageDescription>
<NDC11Code>22840-0034-08</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0034-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0034-9) </PackageDescription>
<NDC11Code>22840-0034-09</NDC11Code>
<ProductNDC>22840-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0035-6) </PackageDescription>
<NDC11Code>22840-0035-06</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0035-8) </PackageDescription>
<NDC11Code>22840-0035-08</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0035-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0035-9) </PackageDescription>
<NDC11Code>22840-0035-09</NDC11Code>
<ProductNDC>22840-0035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0036-3) </PackageDescription>
<NDC11Code>22840-0036-03</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0036-6) </PackageDescription>
<NDC11Code>22840-0036-06</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-8</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (22840-0036-8) </PackageDescription>
<NDC11Code>22840-0036-08</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0036-9</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-0036-9) </PackageDescription>
<NDC11Code>22840-0036-09</NDC11Code>
<ProductNDC>22840-0036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101835</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-3</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-0037-3) </PackageDescription>
<NDC11Code>22840-0037-03</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
<NDC>
<NDCCode>22840-0037-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-0037-6) </PackageDescription>
<NDC11Code>22840-0037-06</NDC11Code>
<ProductNDC>22840-0037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite Mix Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</ProprietaryName>
<NonProprietaryName>Dermatophagoides Farinae And Dermatophagoides Pteronyssinus</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101834</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE; DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
<StrengthNumber>5000; 5000</StrengthNumber>
<StrengthUnit>[AU]/mL; [AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) Extracts are allergenic extracts indicated for: : 1 skin test diagnosis of mite allergy, 2 treatment of patients with mite-induced allergic asthma, rhinitis and conjunctivitis.</IndicationAndUsage>
<Description>Greer Standardized Mite ( Dermatophagoides farinae and/or Dermatophagoides pteronyssinus) extracts are sterile solutions used for intradermal testing or subcutaneous immunotherapy. Each vial contains 5,000, 10,0000 or 30,000 Allergy Units/mL of sterile mite extract ( D. farinae and/or D. pteronyssinus), 50% glycerin v/v, and 0.4% phenol (preservative). Inert ingredients include 0.50% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. For immunotherapy, concentrated extracts are diluted in normal saline, buffered saline, albumin saline or 10% glycerosaline based on patient's reactivity. For intradermal testing, extracts may be diluted in normal saline, buffered saline, or albumin saline. Source materials for the extract are whole mite bodies. The mites are cultured, handled, and cleaned to remove at least 99% of the food medium. The medium containes no material of human origin. The mite extract is standardized by comparison to a reference preparation supplied by the Center for Biologics Evaluation and Research of the FDA, labeled 10,000 Allergy Units/mL. The relative potency of the extract is determined by ELISA inhibition compared to the FDA mite reference, and is labeled in Allergy Units/mL.</Description>
</NDC>
</NDCList>