{
"NDC": [
{
"NDCCode": "25021-189-84",
"PackageDescription": "10 BAG in 1 CARTON (25021-189-84) > 250 mL in 1 BAG",
"NDC11Code": "25021-0189-84",
"ProductNDC": "25021-189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Foscarnet Sodium",
"NonProprietaryName": "Foscarnet Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213001",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "FOSCARNET SODIUM",
"StrengthNumber": "24",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Chelating Activity [MoA], DNA Polymerase Inhibitors [MoA], Pyrophosphate Analog DNA Polymerase Inhibitor [EPC], Pyrophosphate Analog [EXT]",
"Status": "Active",
"LastUpdate": "2021-05-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210515",
"SamplePackage": "N",
"IndicationAndUsage": "Foscarnet sodium injection is indicated for the treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS). Combination therapy with foscarnet sodium injection and ganciclovir is indicated for patients who have relapsed after monotherapy with either drug. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER CMV INFECTIONS (e.g., PNEUMONITIS, GASTROENTERITIS); CONGENITAL OR NEONATAL CMV DISEASE; OR NONIMMUNOCOMPROMISED INDIVIDUALS.",
"Description": "The chemical name of foscarnet sodium is phosphonoformic acid, trisodium salt. Foscarnet sodium is a white, crystalline powder containing 6 equivalents of water of hydration with an empirical formula of Na3 CO5 P·6H2O and a molecular weight of 300.1. The structural formula is:. Foscarnet sodium injection has the potential to chelate divalent metal ions, such as calcium and magnesium, to form stable coordination compounds. Foscarnet sodium injection is a sterile, isotonic aqueous solution for intravenous administration only. The solution is clear and colorless. Each milliliter of foscarnet sodium injection contains 24 mg of foscarnet sodium hexahydrate in Water for Injection, USP. Hydrochloric acid may have been added to adjust the pH of the solution to 7.4. Foscarnet sodium injection contains no preservatives."
},
{
"NDCCode": "51655-189-84",
"PackageDescription": "14 TABLET in 1 BOTTLE, DISPENSING (51655-189-84)",
"NDC11Code": "51655-0189-84",
"ProductNDC": "51655-189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070033",
"LabelerName": "Northwind Pharmaceuticals, LLC",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Symptomatic Trichomoniasis. Metronidazole Tablets USP are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures). Asymptomatic Trichomoniasis. Metronidazole Tablets USP are indicated in the treatment of asymptomatic T. vaginalis infection in females when the organism is associated with endocervicitis, cervicitis, or cervical erosion. Since there is evidence that presence of the trichomonad can interfere with accurate assessment of abnormal cytological smears, additional smears should be performed after eradication of the parasite. Treatment of Asymptomatic Sexual Partners. T. vaginalis infection is a venereal disease. Therefore, asymptomatic sexual partners of treated patients should be treated simultaneously if the organism has been found to be present, in order to prevent reinfection of the partner. The decision as to whether to treat an asymptomatic male partner who has a negative culture or one for whom no culture has been attempted is an individual one. In making this decision, it should be noted that there is evidence that a woman may become reinfected if her sexual partner is not treated. Also, since there can be considerable difficulty in isolating the organism from the asymptomatic male carrier, negative smears and cultures cannot be relied upon in this regard. In any event, the sexual partner should be treated with metronidazole tablets USP in cases of reinfection. Amebiasis. Metronidazole Tablets USP are indicated in the treatment of acute intestinal amebiasis (amebic dysentery) and amebic liver abscess. In amebic liver abscess, metronidazole tablets USP therapy does not obviate the need for aspiration or drainage of pus. Anaerobic Bacterial Infections. Metronidazole Tablets USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole tablets USP therapy. In a mixed aerobic and anaerobic infection, antimicrobials appropriate for the treatment of the aerobic infection should be used in addition to metronidazole tablets USP. INTRA-ABDOMINAL INFECTIONS, including peritonitis, intra-abdominal abscess, and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis,B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. SKIN AND SKIN STRUCTURE INFECTIONS caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species, and Fusobacterium species. GYNECOLOGIC INFECTIONS, including endometritis, endomyometritis, tubo-ovarian abscess, and postsurgical vaginal cuff infection, caused by Bacteroides species including the B.fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species, and Fusobacterium species. BACTERIAL SEPTICEMIA caused by Bacteroides species including the B. fragilis group and Clostridium species. BONE AND JOINT INFECTIONS, (as adjunctive therapy), caused by Bacteroides species including the B. fragilis group. CENTRAL NERVOUS SYSTEM (CNS) INFECTIONS, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. LOWER RESPIRATORY TRACT INFECTIONS, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. ENDOCARDITIS caused by Bacteroides species including the B. fragilis group. To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole tablets USP and other antibacterial drugs, metronidazole tablets USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Metronidazole, USP is an oral synthetic antiprotozoal and antibacterial agent, 1H-Imidazole-1-ethanol, 2-methyl-5-nitro. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil."
},
{
"NDCCode": "25021-308-84",
"PackageDescription": "10 BAG in 1 CARTON (25021-308-84) / 250 mL in 1 BAG",
"NDC11Code": "25021-0308-84",
"ProductNDC": "25021-308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esmolol Hydrochloride",
"NonProprietaryName": "Esmolol Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207107",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ESMOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190715",
"SamplePackage": "N",
"IndicationAndUsage": "Esmolol Hydrochloride in Sodium Chloride Injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in noncompensatory sinus tachycardia (1.1) , 2 Control of perioperative tachycardia and hypertension (1.2) .",
"Description": "Esmolol hydrochloride is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol Hydrochloride is: : 1 (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure:, 2 Esmolol hydrochloride has the empirical formula C16H26NO4Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. , 3 Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. ."
},
{
"NDCCode": "25021-417-84",
"PackageDescription": "1 BAG in 1 CARTON (25021-417-84) / 250 mL in 1 BAG",
"NDC11Code": "25021-0417-84",
"ProductNDC": "25021-417",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tirofiban Hydrochloride",
"NonProprietaryName": "Tirofiban Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206888",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TIROFIBAN HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241115",
"SamplePackage": "N",
"IndicationAndUsage": "Tirofiban hydrochloride injection is indicated to reduce the rate of thrombotic cardiovascular events (combined endpoint of death, myocardial infarction, or refractory ischemia/repeat cardiac procedure) in patients with non-ST elevation acute coronary syndrome (NSTE-ACS).",
"Description": "Tirofiban hydrochloride injection contains tirofiban hydrochloride, a non-peptide antagonist of the platelet GP IIb/IIIa receptor, which inhibits platelet aggregation. Tirofiban hydrochloride monohydrate is chemically described as N-(butylsulfonyl)-O-[4-(4-piperidinyl)butyl]-L-tyrosine monohydrochloride monohydrate. Its molecular formula is C22H36N2O5SHClH2O and its structural formula is:. Tirofiban hydrochloride monohydrate is a white to off-white, non-hygroscopic, free-flowing powder, with a molecular weight of 495.08. It is very slightly soluble in water. Tirofiban hydrochloride injection is supplied as a sterile solution in water for injection, for intravenous use. The pH of the solution ranges from 5.5 to 6.5 adjusted with hydrochloric acid and/or sodium hydroxide. Each 250 mL of the premixed, isosmotic intravenous injection contains 14.045 mg tirofiban hydrochloride monohydrate equivalent to 12.5 mg tirofiban (50 mcg per mL) and the following inactive ingredients: 2.25 g sodium chloride, 135 mg sodium citrate dihydrate, and 8 mg citric acid anhydrous."
},
{
"NDCCode": "25021-246-02",
"PackageDescription": "1 VIAL in 1 CARTON (25021-246-02) / 1.5 mL in 1 VIAL",
"NDC11Code": "25021-0246-02",
"ProductNDC": "25021-246",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiotepa",
"NonProprietaryName": "Thiotepa",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVITARY; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209150",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "THIOTEPA",
"StrengthNumber": "15",
"StrengthUnit": "mg/1.5mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180615",
"SamplePackage": "N",
"IndicationAndUsage": "Thiotepa for Injection has been tried with varying results in the palliation of a wide variety of neoplastic diseases. However, the most consistent results have been seen in the following tumors: : 1 Adenocarcinoma of the breast. , 2 Adenocarcinoma of the ovary. , 3 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. , 4 For the treatment of superficial papillary carcinoma of the urinary bladder. .",
"Description": "Thiotepa for Injection, USP is an ethylenimine-type compound. It is supplied as a non-pyrogenic, sterile lyophilized powder for intravenous, intracavitary or intravesical administration, containing 15 mg of thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Aziridine, 1,1',1''-phosphinothioylidynetris-, or Tris (1-aziridinyl) phosphine sulfide. Thiotepa has the following structural formula:. Thiotepa has the empirical formula C6H12N3PS, and a molecular weight of 189.22. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is stable in alkaline medium and unstable in acid medium."
},
{
"NDCCode": "25021-501-66",
"PackageDescription": "10 VIAL in 1 CARTON (25021-501-66) > 10 mL in 1 VIAL",
"NDC11Code": "25021-0501-66",
"ProductNDC": "25021-501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20121002",
"EndMarketingDate": "20150131",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2015-02-06"
},
{
"NDCCode": "11489-189-01",
"PackageDescription": "1 TUBE in 1 CARTON (11489-189-01) > 25 g in 1 TUBE",
"NDC11Code": "11489-0189-01",
"ProductNDC": "11489-189",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Protect And Perfect Intense Advanced Day Cream Spf 30",
"NonProprietaryName": "Avobenzone, Octisalate, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220624",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BCM Ltd",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": ".75; 1.25; 1.875",
"StrengthUnit": "g/25g; g/25g; g/25g",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220624",
"SamplePackage": "N",
"IndicationAndUsage": "Directions. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 months of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. limit time in the sun, especially from 10 a.m - 2 p.m. wear long-sleeved shirts,pants,hats and sunglasses.",
"Description": "No7 Protect & Perfect COLLECTION. 25 ml e 0.84 Fl. Oz."
},
{
"NDCCode": "14141-189-01",
"PackageDescription": "9 g in 1 JAR (14141-189-01) ",
"NDC11Code": "14141-0189-01",
"ProductNDC": "14141-189",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clarite Makeup For A Cleaner Appearance Spf 30 320-c",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200324",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BEL STAR S A",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "7.5; 7.84",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200324",
"SamplePackage": "N"
},
{
"NDCCode": "73562-110-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-110-01) ",
"NDC11Code": "73562-0110-01",
"ProductNDC": "73562-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "10000; 32000; 42000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-110-10",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-110-10) ",
"NDC11Code": "73562-0110-10",
"ProductNDC": "73562-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "10000; 32000; 42000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210201",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-111-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-111-01) ",
"NDC11Code": "73562-0111-01",
"ProductNDC": "73562-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "15000; 47000; 63000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-112-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-112-01) ",
"NDC11Code": "73562-0112-01",
"ProductNDC": "73562-112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "20000; 63000; 84000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-113-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-113-01) ",
"NDC11Code": "73562-0113-01",
"ProductNDC": "73562-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "3000; 10000; 14000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-113-10",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-113-10) ",
"NDC11Code": "73562-0113-10",
"ProductNDC": "73562-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "3000; 10000; 14000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-114-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-114-01) ",
"NDC11Code": "73562-0114-01",
"ProductNDC": "73562-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "40000; 126000; 168000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-114-12",
"PackageDescription": "12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-114-12) ",
"NDC11Code": "73562-0114-12",
"ProductNDC": "73562-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "40000; 126000; 168000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-115-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-115-01) ",
"NDC11Code": "73562-0115-01",
"ProductNDC": "73562-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "5000; 17000; 24000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-115-10",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-115-10) ",
"NDC11Code": "73562-0115-10",
"ProductNDC": "73562-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "5000; 17000; 24000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210201",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-116-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-116-01) ",
"NDC11Code": "73562-0116-01",
"ProductNDC": "73562-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "25000; 79000; 105000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-116-12",
"PackageDescription": "12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-116-12) ",
"NDC11Code": "73562-0116-12",
"ProductNDC": "73562-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "25000; 79000; 105000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210501",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-117-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-117-01) ",
"NDC11Code": "73562-0117-01",
"ProductNDC": "73562-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "60000; 189600; 252600",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231027",
"SamplePackage": "N",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "73562-117-12",
"PackageDescription": "12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-117-12) ",
"NDC11Code": "73562-0117-12",
"ProductNDC": "73562-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA022210",
"LabelerName": "Aimmune Therapeutics, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "60000; 189600; 252600",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231027",
"SamplePackage": "Y",
"IndicationAndUsage": "ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.",
"Description": "Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 3\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint \"APTALIS 5\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint \"APTALIS 10\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint \"APTALIS 15\". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint \"APTALIS 20\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint \"APTALIS 25\". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with \"APTALIS 40\". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with \"APTALIS 60\" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate."
},
{
"NDCCode": "25021-001-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-001-02) / 2.5 mL in 1 BOTTLE",
"NDC11Code": "25021-0001-02",
"ProductNDC": "25021-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Latanoprost",
"NonProprietaryName": "Latanoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218257",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "LATANOPROST",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Latanoprost ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Latanoprost is a prostaglandin F2α analogue. Its chemical name is isopropyl-(Z)-7[(1R,2R,3R,5S)3,5-dihydroxy-2-[(3R)-3-hydroxy-5-phenylpentyl]cyclopentyl]-5-heptenoate. Its molecular formula is C26H40O5 and its chemical structure is:. Latanoprost is a colorless to slightly yellow oil that is very soluble in acetonitrile and freely soluble in acetone, ethanol, ethyl acetate, isopropanol, methanol, and octanol. It is practically insoluble in water. Latanoprost ophthalmic solution 0.005% is supplied as a sterile, isotonic, buffered aqueous solution of latanoprost with a pH of approximately 6.7 and an osmolality of approximately 267 mOsmol/kg. Each mL of latanoprost ophthalmic solution contains 50 mcg of latanoprost. Benzalkonium chloride, 0.02% is added as a preservative. The inactive ingredients are: sodium chloride, sodium dihydrogen phosphate monohydrate, disodium hydrogen phosphate anhydrous, and water for injection. One drop contains approximately 1.5 mcg of latanoprost."
},
{
"NDCCode": "25021-002-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-002-02) / 2.5 mL in 1 BOTTLE",
"NDC11Code": "25021-0002-02",
"ProductNDC": "25021-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travoprost Ophthalmic Soluton",
"NonProprietaryName": "Travoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218159",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TRAVOPROST",
"StrengthNumber": ".04",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system."
},
{
"NDCCode": "25021-002-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-002-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0002-05",
"ProductNDC": "25021-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travoprost Ophthalmic Soluton",
"NonProprietaryName": "Travoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218159",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TRAVOPROST",
"StrengthNumber": ".04",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system."
},
{
"NDCCode": "25021-006-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-006-10) / 10 mL in 1 BOTTLE",
"NDC11Code": "25021-0006-10",
"ProductNDC": "25021-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dorzolamide Hydrochloride",
"NonProprietaryName": "Dorzolamide Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215660",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DORZOLAMIDE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Dorzolamide Hydrochloride Ophthalmic Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Dorzolamide Hydrochloride Ophthalmic Solution, USP is a carbonic anhydrase inhibitor formulated for topical ophthalmic use. Dorzolamide hydrochloride, USP is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride, USP is optically active. The specific rotation is. [α] 25°C (C=1,water) = ~ - 17°. 405 nm. Its empirical formula is C10H16N2O4S3.HCl and its structural formula is:. Dorzolamide hydrochloride, USP has a molecular weight of 360.9 and a melting point of about 264°C. It is a white to almost white crystalline powder, which is soluble in water and slightly soluble in methanol and very slightly soluble in anhydrous ethanol. Dorzolamide Hydrochloride Ophthalmic Solution, USP is supplied as a sterile, isotonic, buffered, slightly viscous, aqueous solution of dorzolamide hydrochloride, USP. The pH of the solution is approximately 5.4 to 5.9, and the osmolarity is 260 to 330 mOsM. Each mL of Dorzolamide Hydrochloride Ophthalmic Solution, USP 2% contains 20 mg dorzolamide (22.3 mg of dorzolamide hydrochloride, USP). Inactive ingredients are hydroxyethyl cellulose, mannitol, sodium citrate dihydrate, sodium hydroxide (to adjust pH) and water for injection. Benzalkonium chloride 0.0075% is added as a preservative."
},
{
"NDCCode": "25021-008-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-008-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0008-05",
"ProductNDC": "25021-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION, GEL FORMING / DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214645",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "25021-009-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-009-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0009-05",
"ProductNDC": "25021-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION, GEL FORMING / DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214645",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "25021-052-01",
"PackageDescription": "25 VIAL in 1 CARTON (25021-052-01) / 1 mL in 1 VIAL",
"NDC11Code": "25021-0052-01",
"ProductNDC": "25021-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215654",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .",
"Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
},
{
"NDCCode": "25021-052-05",
"PackageDescription": "25 VIAL in 1 CARTON (25021-052-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0052-05",
"ProductNDC": "25021-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215654",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .",
"Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>25021-189-84</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-189-84) > 250 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0189-84</NDC11Code>
<ProductNDC>25021-189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Foscarnet Sodium</ProprietaryName>
<NonProprietaryName>Foscarnet Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213001</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>FOSCARNET SODIUM</SubstanceName>
<StrengthNumber>24</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Chelating Activity [MoA], DNA Polymerase Inhibitors [MoA], Pyrophosphate Analog DNA Polymerase Inhibitor [EPC], Pyrophosphate Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-05-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Foscarnet sodium injection is indicated for the treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS). Combination therapy with foscarnet sodium injection and ganciclovir is indicated for patients who have relapsed after monotherapy with either drug. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER CMV INFECTIONS (e.g., PNEUMONITIS, GASTROENTERITIS); CONGENITAL OR NEONATAL CMV DISEASE; OR NONIMMUNOCOMPROMISED INDIVIDUALS.</IndicationAndUsage>
<Description>The chemical name of foscarnet sodium is phosphonoformic acid, trisodium salt. Foscarnet sodium is a white, crystalline powder containing 6 equivalents of water of hydration with an empirical formula of Na3 CO5 P·6H2O and a molecular weight of 300.1. The structural formula is:. Foscarnet sodium injection has the potential to chelate divalent metal ions, such as calcium and magnesium, to form stable coordination compounds. Foscarnet sodium injection is a sterile, isotonic aqueous solution for intravenous administration only. The solution is clear and colorless. Each milliliter of foscarnet sodium injection contains 24 mg of foscarnet sodium hexahydrate in Water for Injection, USP. Hydrochloric acid may have been added to adjust the pH of the solution to 7.4. Foscarnet sodium injection contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>51655-189-84</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE, DISPENSING (51655-189-84)</PackageDescription>
<NDC11Code>51655-0189-84</NDC11Code>
<ProductNDC>51655-189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070033</ApplicationNumber>
<LabelerName>Northwind Pharmaceuticals, LLC</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Symptomatic Trichomoniasis. Metronidazole Tablets USP are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures). Asymptomatic Trichomoniasis. Metronidazole Tablets USP are indicated in the treatment of asymptomatic T. vaginalis infection in females when the organism is associated with endocervicitis, cervicitis, or cervical erosion. Since there is evidence that presence of the trichomonad can interfere with accurate assessment of abnormal cytological smears, additional smears should be performed after eradication of the parasite. Treatment of Asymptomatic Sexual Partners. T. vaginalis infection is a venereal disease. Therefore, asymptomatic sexual partners of treated patients should be treated simultaneously if the organism has been found to be present, in order to prevent reinfection of the partner. The decision as to whether to treat an asymptomatic male partner who has a negative culture or one for whom no culture has been attempted is an individual one. In making this decision, it should be noted that there is evidence that a woman may become reinfected if her sexual partner is not treated. Also, since there can be considerable difficulty in isolating the organism from the asymptomatic male carrier, negative smears and cultures cannot be relied upon in this regard. In any event, the sexual partner should be treated with metronidazole tablets USP in cases of reinfection. Amebiasis. Metronidazole Tablets USP are indicated in the treatment of acute intestinal amebiasis (amebic dysentery) and amebic liver abscess. In amebic liver abscess, metronidazole tablets USP therapy does not obviate the need for aspiration or drainage of pus. Anaerobic Bacterial Infections. Metronidazole Tablets USP are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole tablets USP therapy. In a mixed aerobic and anaerobic infection, antimicrobials appropriate for the treatment of the aerobic infection should be used in addition to metronidazole tablets USP. INTRA-ABDOMINAL INFECTIONS, including peritonitis, intra-abdominal abscess, and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis,B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species, and Peptostreptococcus species. SKIN AND SKIN STRUCTURE INFECTIONS caused by Bacteroides species including the B. fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species, and Fusobacterium species. GYNECOLOGIC INFECTIONS, including endometritis, endomyometritis, tubo-ovarian abscess, and postsurgical vaginal cuff infection, caused by Bacteroides species including the B.fragilis group, Clostridium species, Peptococcus species, Peptostreptococcus species, and Fusobacterium species. BACTERIAL SEPTICEMIA caused by Bacteroides species including the B. fragilis group and Clostridium species. BONE AND JOINT INFECTIONS, (as adjunctive therapy), caused by Bacteroides species including the B. fragilis group. CENTRAL NERVOUS SYSTEM (CNS) INFECTIONS, including meningitis and brain abscess, caused by Bacteroides species including the B. fragilis group. LOWER RESPIRATORY TRACT INFECTIONS, including pneumonia, empyema, and lung abscess, caused by Bacteroides species including the B. fragilis group. ENDOCARDITIS caused by Bacteroides species including the B. fragilis group. To reduce the development of drug-resistant bacteria and maintain the effectiveness of metronidazole tablets USP and other antibacterial drugs, metronidazole tablets USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Metronidazole, USP is an oral synthetic antiprotozoal and antibacterial agent, 1H-Imidazole-1-ethanol, 2-methyl-5-nitro. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil.</Description>
</NDC>
<NDC>
<NDCCode>25021-308-84</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-308-84) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0308-84</NDC11Code>
<ProductNDC>25021-308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esmolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Esmolol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207107</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ESMOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esmolol Hydrochloride in Sodium Chloride Injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in noncompensatory sinus tachycardia (1.1) , 2 Control of perioperative tachycardia and hypertension (1.2) .</IndicationAndUsage>
<Description>Esmolol hydrochloride is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol Hydrochloride is: : 1 (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure:, 2 Esmolol hydrochloride has the empirical formula C16H26NO4Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. , 3 Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. .</Description>
</NDC>
<NDC>
<NDCCode>25021-417-84</NDCCode>
<PackageDescription>1 BAG in 1 CARTON (25021-417-84) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0417-84</NDC11Code>
<ProductNDC>25021-417</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tirofiban Hydrochloride</ProprietaryName>
<NonProprietaryName>Tirofiban Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206888</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TIROFIBAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tirofiban hydrochloride injection is indicated to reduce the rate of thrombotic cardiovascular events (combined endpoint of death, myocardial infarction, or refractory ischemia/repeat cardiac procedure) in patients with non-ST elevation acute coronary syndrome (NSTE-ACS).</IndicationAndUsage>
<Description>Tirofiban hydrochloride injection contains tirofiban hydrochloride, a non-peptide antagonist of the platelet GP IIb/IIIa receptor, which inhibits platelet aggregation. Tirofiban hydrochloride monohydrate is chemically described as N-(butylsulfonyl)-O-[4-(4-piperidinyl)butyl]-L-tyrosine monohydrochloride monohydrate. Its molecular formula is C22H36N2O5SHClH2O and its structural formula is:. Tirofiban hydrochloride monohydrate is a white to off-white, non-hygroscopic, free-flowing powder, with a molecular weight of 495.08. It is very slightly soluble in water. Tirofiban hydrochloride injection is supplied as a sterile solution in water for injection, for intravenous use. The pH of the solution ranges from 5.5 to 6.5 adjusted with hydrochloric acid and/or sodium hydroxide. Each 250 mL of the premixed, isosmotic intravenous injection contains 14.045 mg tirofiban hydrochloride monohydrate equivalent to 12.5 mg tirofiban (50 mcg per mL) and the following inactive ingredients: 2.25 g sodium chloride, 135 mg sodium citrate dihydrate, and 8 mg citric acid anhydrous.</Description>
</NDC>
<NDC>
<NDCCode>25021-246-02</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-246-02) / 1.5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0246-02</NDC11Code>
<ProductNDC>25021-246</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiotepa</ProprietaryName>
<NonProprietaryName>Thiotepa</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209150</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>THIOTEPA</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1.5mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiotepa for Injection has been tried with varying results in the palliation of a wide variety of neoplastic diseases. However, the most consistent results have been seen in the following tumors: : 1 Adenocarcinoma of the breast. , 2 Adenocarcinoma of the ovary. , 3 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. , 4 For the treatment of superficial papillary carcinoma of the urinary bladder. .</IndicationAndUsage>
<Description>Thiotepa for Injection, USP is an ethylenimine-type compound. It is supplied as a non-pyrogenic, sterile lyophilized powder for intravenous, intracavitary or intravesical administration, containing 15 mg of thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Aziridine, 1,1',1''-phosphinothioylidynetris-, or Tris (1-aziridinyl) phosphine sulfide. Thiotepa has the following structural formula:. Thiotepa has the empirical formula C6H12N3PS, and a molecular weight of 189.22. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is stable in alkaline medium and unstable in acid medium.</Description>
</NDC>
<NDC>
<NDCCode>25021-501-66</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-501-66) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0501-66</NDC11Code>
<ProductNDC>25021-501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20121002</StartMarketingDate>
<EndMarketingDate>20150131</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-02-06</LastUpdate>
</NDC>
<NDC>
<NDCCode>11489-189-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11489-189-01) > 25 g in 1 TUBE</PackageDescription>
<NDC11Code>11489-0189-01</NDC11Code>
<ProductNDC>11489-189</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Protect And Perfect Intense Advanced Day Cream Spf 30</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220624</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BCM Ltd</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>.75; 1.25; 1.875</StrengthNumber>
<StrengthUnit>g/25g; g/25g; g/25g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220624</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 months of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. limit time in the sun, especially from 10 a.m - 2 p.m. wear long-sleeved shirts,pants,hats and sunglasses.</IndicationAndUsage>
<Description>No7 Protect & Perfect COLLECTION. 25 ml e 0.84 Fl. Oz.</Description>
</NDC>
<NDC>
<NDCCode>14141-189-01</NDCCode>
<PackageDescription>9 g in 1 JAR (14141-189-01) </PackageDescription>
<NDC11Code>14141-0189-01</NDC11Code>
<ProductNDC>14141-189</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 320-c</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200324</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BEL STAR S A</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.5; 7.84</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>73562-110-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-110-01) </PackageDescription>
<NDC11Code>73562-0110-01</NDC11Code>
<ProductNDC>73562-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>10000; 32000; 42000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-110-10</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-110-10) </PackageDescription>
<NDC11Code>73562-0110-10</NDC11Code>
<ProductNDC>73562-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>10000; 32000; 42000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210201</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-111-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-111-01) </PackageDescription>
<NDC11Code>73562-0111-01</NDC11Code>
<ProductNDC>73562-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>15000; 47000; 63000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-112-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-112-01) </PackageDescription>
<NDC11Code>73562-0112-01</NDC11Code>
<ProductNDC>73562-112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>20000; 63000; 84000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-113-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-113-01) </PackageDescription>
<NDC11Code>73562-0113-01</NDC11Code>
<ProductNDC>73562-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>3000; 10000; 14000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-113-10</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-113-10) </PackageDescription>
<NDC11Code>73562-0113-10</NDC11Code>
<ProductNDC>73562-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>3000; 10000; 14000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-114-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-114-01) </PackageDescription>
<NDC11Code>73562-0114-01</NDC11Code>
<ProductNDC>73562-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>40000; 126000; 168000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-114-12</NDCCode>
<PackageDescription>12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-114-12) </PackageDescription>
<NDC11Code>73562-0114-12</NDC11Code>
<ProductNDC>73562-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>40000; 126000; 168000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-115-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-115-01) </PackageDescription>
<NDC11Code>73562-0115-01</NDC11Code>
<ProductNDC>73562-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>5000; 17000; 24000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-115-10</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-115-10) </PackageDescription>
<NDC11Code>73562-0115-10</NDC11Code>
<ProductNDC>73562-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>5000; 17000; 24000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210201</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-116-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-116-01) </PackageDescription>
<NDC11Code>73562-0116-01</NDC11Code>
<ProductNDC>73562-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>25000; 79000; 105000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-116-12</NDCCode>
<PackageDescription>12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-116-12) </PackageDescription>
<NDC11Code>73562-0116-12</NDC11Code>
<ProductNDC>73562-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>25000; 79000; 105000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-117-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-117-01) </PackageDescription>
<NDC11Code>73562-0117-01</NDC11Code>
<ProductNDC>73562-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>60000; 189600; 252600</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>73562-117-12</NDCCode>
<PackageDescription>12 CAPSULE, DELAYED RELEASE in 1 BOTTLE (73562-117-12) </PackageDescription>
<NDC11Code>73562-0117-12</NDC11Code>
<ProductNDC>73562-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase Lipase, Pancrelipase Protease, Pancrelipase Amylase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA022210</ApplicationNumber>
<LabelerName>Aimmune Therapeutics, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>60000; 189600; 252600</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231027</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZENPEP® is indicated for the treatment of exocrine pancreatic insufficiency in adult and pediatric patients.</IndicationAndUsage>
<Description>Pancrelipase is a pancreatic enzyme product consisting of a mixture of enzymes including lipases, proteases, and amylases, and is an extract derived from porcine pancreatic glands. The enteric-coated pellets in ZENPEP are formulated to release pancreatic enzymes at an approximate pH of 5.5 or greater. ZENPEP (pancrelipase) delayed-release capsule for oral administration, include a two-piece shell containing light brown-colored enteric-coated pellets (1.8 to 1.9mm for 3,000 and 5,000 USP units of lipase, 2.2 to 2.5 mm for 10,000, 15,000, 20,000, 25,000, 40,000 and 60,000 USP units of lipase) and are available as follows. 3,000 USP units of lipase; 10,000 USP units of protease; and 14,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 3". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is red iron oxide. 5,000 USP units of lipase; 17,000 USP units of protease; and 24,000 USP units of amylase; delayed-release capsules have a white opaque cap and a white opaque body with imprint "APTALIS 5". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 10,000 USP units of lipase; 32,000 USP units of protease; and 42,000 USP units of amylase; delayed-release capsules have a yellow opaque cap and a white opaque body with imprint "APTALIS 10". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, titanium oxide, water and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 15,000 USP units of lipase; 47,000 USP units of protease; and 63,000 USP units of amylase; delayed-release capsules have a red opaque cap and a white opaque body with imprint "APTALIS 15". The shells contain carnauba wax or talc, carrageenan, hypromellose, potassium chloride, red ferric oxide, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 20,000 USP units of lipase; 63,000 USP units of protease; and 84,000 USP units of amylase; delayed-release capsules have a green opaque cap and a white opaque body with imprint "APTALIS 20". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, water, and yellow ferric oxide. The colorant of the printed ink is FD&C Blue 2. 25,000 USP units of lipase; 79,000 USP units of protease; and 105,000 USP units of amylase; delayed-release capsules have a blue opaque cap and a white opaque body with imprint "APTALIS 25". The shells contain carnauba wax or talc, carrageenan, FD&C Blue #2, hypromellose, potassium chloride, titanium oxide, and water. The colorant of the printed ink is FD&C Blue 2. 40,000 USP units of lipase; 126,000 USP units of protease; and 168,000 USP units of amylase; delayed-release capsules have an orange opaque cap and white opaque body, printed with "APTALIS 40". The shells contain FD&C Yellow #6, hypromellose, and titanium oxide. The colorant of the printed ink is FD&C Blue 2. 60,000 USP units of lipase; 189,600 USP units of protease; 252,600 USP units of amylase. Capsules have a powder blue opaque cap with two black stripes and white opaque body, printed with "APTALIS 60" The shells contain FD&C Blue #1, hypromellose, and titanium oxide. The colorant of the printed ink is black iron oxide. ZENPEP (pancrelipase) delayed-release capsules include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, hypromellose phthalate, magnesium stearate, microcrystalline cellulose, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>25021-001-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-001-02) / 2.5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0001-02</NDC11Code>
<ProductNDC>25021-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Latanoprost</ProprietaryName>
<NonProprietaryName>Latanoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218257</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>LATANOPROST</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Latanoprost ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Latanoprost is a prostaglandin F2α analogue. Its chemical name is isopropyl-(Z)-7[(1R,2R,3R,5S)3,5-dihydroxy-2-[(3R)-3-hydroxy-5-phenylpentyl]cyclopentyl]-5-heptenoate. Its molecular formula is C26H40O5 and its chemical structure is:. Latanoprost is a colorless to slightly yellow oil that is very soluble in acetonitrile and freely soluble in acetone, ethanol, ethyl acetate, isopropanol, methanol, and octanol. It is practically insoluble in water. Latanoprost ophthalmic solution 0.005% is supplied as a sterile, isotonic, buffered aqueous solution of latanoprost with a pH of approximately 6.7 and an osmolality of approximately 267 mOsmol/kg. Each mL of latanoprost ophthalmic solution contains 50 mcg of latanoprost. Benzalkonium chloride, 0.02% is added as a preservative. The inactive ingredients are: sodium chloride, sodium dihydrogen phosphate monohydrate, disodium hydrogen phosphate anhydrous, and water for injection. One drop contains approximately 1.5 mcg of latanoprost.</Description>
</NDC>
<NDC>
<NDCCode>25021-002-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-002-02) / 2.5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0002-02</NDC11Code>
<ProductNDC>25021-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travoprost Ophthalmic Soluton</ProprietaryName>
<NonProprietaryName>Travoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218159</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TRAVOPROST</SubstanceName>
<StrengthNumber>.04</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system.</Description>
</NDC>
<NDC>
<NDCCode>25021-002-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-002-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0002-05</NDC11Code>
<ProductNDC>25021-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travoprost Ophthalmic Soluton</ProprietaryName>
<NonProprietaryName>Travoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218159</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TRAVOPROST</SubstanceName>
<StrengthNumber>.04</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system.</Description>
</NDC>
<NDC>
<NDCCode>25021-006-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-006-10) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0006-10</NDC11Code>
<ProductNDC>25021-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dorzolamide Hydrochloride</ProprietaryName>
<NonProprietaryName>Dorzolamide Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215660</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DORZOLAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dorzolamide Hydrochloride Ophthalmic Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Dorzolamide Hydrochloride Ophthalmic Solution, USP is a carbonic anhydrase inhibitor formulated for topical ophthalmic use. Dorzolamide hydrochloride, USP is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride, USP is optically active. The specific rotation is. [α] 25°C (C=1,water) = ~ - 17°. 405 nm. Its empirical formula is C10H16N2O4S3.HCl and its structural formula is:. Dorzolamide hydrochloride, USP has a molecular weight of 360.9 and a melting point of about 264°C. It is a white to almost white crystalline powder, which is soluble in water and slightly soluble in methanol and very slightly soluble in anhydrous ethanol. Dorzolamide Hydrochloride Ophthalmic Solution, USP is supplied as a sterile, isotonic, buffered, slightly viscous, aqueous solution of dorzolamide hydrochloride, USP. The pH of the solution is approximately 5.4 to 5.9, and the osmolarity is 260 to 330 mOsM. Each mL of Dorzolamide Hydrochloride Ophthalmic Solution, USP 2% contains 20 mg dorzolamide (22.3 mg of dorzolamide hydrochloride, USP). Inactive ingredients are hydroxyethyl cellulose, mannitol, sodium citrate dihydrate, sodium hydroxide (to adjust pH) and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>25021-008-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-008-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0008-05</NDC11Code>
<ProductNDC>25021-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION, GEL FORMING / DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214645</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>25021-009-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-009-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0009-05</NDC11Code>
<ProductNDC>25021-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION, GEL FORMING / DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214645</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>25021-052-01</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-052-01) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0052-01</NDC11Code>
<ProductNDC>25021-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215654</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .</IndicationAndUsage>
<Description>Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-052-05</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-052-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0052-05</NDC11Code>
<ProductNDC>25021-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215654</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .</IndicationAndUsage>
<Description>Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
</NDCList>