RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>25021-239-05</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-239-05)  / 5.26 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0239-05</NDC11Code>
    <ProductNDC>25021-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209077</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-239-26</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-239-26)  / 26.3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0239-26</NDC11Code>
    <ProductNDC>25021-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209077</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-239-52</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-239-52)  / 52.6 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0239-52</NDC11Code>
    <ProductNDC>25021-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209077</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>51655-239-26</NDCCode>
    <PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-239-26) </PackageDescription>
    <NDC11Code>51655-0239-26</NDC11Code>
    <ProductNDC>51655-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoprolol Succinate</ProprietaryName>
    <NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213854</ApplicationNumber>
    <LabelerName>Northwind Health Company, LLC</LabelerName>
    <SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metoprolol succinate, is a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure. ( 1.3) .</IndicationAndUsage>
    <Description>Metoprolol succinate, is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol Succinate Extended-Release Tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1-(isopropyl amino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethyl ether and heptane. Inactive ingredients: colloidal silicon dioxide, crospovidone, ethylcellulose, hypromellose, lactose monohydrate (25 mg and 50 mg), magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, sugar spheres (composed of corn starch and sucrose), talc, titanium dioxide and triethyl citrate. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>56062-239-26</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (56062-239-26)  &gt; 120 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>56062-0239-26</NDC11Code>
    <ProductNDC>56062-239</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Childrens Cold And Flu</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190921</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Publix Super Markets Inc</LabelerName>
    <SubstanceName>ACETAMINOPHEN; CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>160; 1; 5; 2.5</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-11-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65862-239-26</NDCCode>
    <PackageDescription>2500 CAPSULE in 1 BAG (65862-239-26) </PackageDescription>
    <NDC11Code>65862-0239-26</NDC11Code>
    <ProductNDC>65862-239</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Atomoxetine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <StartMarketingDate>20170530</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>ATOMOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>18</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>30-MAY-17</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>46708-239-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-239-30) </PackageDescription>
    <NDC11Code>46708-0239-30</NDC11Code>
    <ProductNDC>46708-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vardenafil Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vardenafil Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200805</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214031</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>VARDENAFIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200805</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vardenafil hydrochloride tablets are indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
    <Description>Vardenafil hydrochloride tablets are administered orally for the treatment of erectile dysfunction. This monohydrochloride salt of vardenafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Vardenafil hydrochloride is designated chemically as piperazine, 1-[[3-(1,4-dihydro-5-methyl-4-oxo-7-propylimidazo[5,1-f][1,2,4]triazin-2-yl)-4-ethoxyphenyl]sulfonyl]-4-ethyl-, monohydrochloride and has the following structural formula. Vardenafil hydrochloride is a white or slightly brown or yellow powder with a molecular weight of 579.11. It is slightly soluble in water, freely soluble in anhydrous ethanol. Practically insoluble in heptane. Vardenafil hydrochloride is available as film-coated tablets for oral administration, containing 2.5 mg, 5 mg, 10 mg and 20 mg of vardenafil. The inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, talc, colloidal silicon dioxide and magnesium stearate. The colorants include hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, iron oxide red, FD&amp;C Yellow No. 5 Tartrazine Aluminum Lake and FD&amp;C Yellow No. 6 Sunset Yellow FCF Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-239-31</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (46708-239-31) </PackageDescription>
    <NDC11Code>46708-0239-31</NDC11Code>
    <ProductNDC>46708-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vardenafil Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vardenafil Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200805</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214031</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>VARDENAFIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200805</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vardenafil hydrochloride tablets are indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
    <Description>Vardenafil hydrochloride tablets are administered orally for the treatment of erectile dysfunction. This monohydrochloride salt of vardenafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Vardenafil hydrochloride is designated chemically as piperazine, 1-[[3-(1,4-dihydro-5-methyl-4-oxo-7-propylimidazo[5,1-f][1,2,4]triazin-2-yl)-4-ethoxyphenyl]sulfonyl]-4-ethyl-, monohydrochloride and has the following structural formula. Vardenafil hydrochloride is a white or slightly brown or yellow powder with a molecular weight of 579.11. It is slightly soluble in water, freely soluble in anhydrous ethanol. Practically insoluble in heptane. Vardenafil hydrochloride is available as film-coated tablets for oral administration, containing 2.5 mg, 5 mg, 10 mg and 20 mg of vardenafil. The inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, talc, colloidal silicon dioxide and magnesium stearate. The colorants include hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, iron oxide red, FD&amp;C Yellow No. 5 Tartrazine Aluminum Lake and FD&amp;C Yellow No. 6 Sunset Yellow FCF Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>62756-239-18</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (62756-239-18) </PackageDescription>
    <NDC11Code>62756-0239-18</NDC11Code>
    <ProductNDC>62756-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Capecitabine</ProprietaryName>
    <NonProprietaryName>Capecitabine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204668</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CAPECITABINE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Capecitabine is a nucleoside metabolic inhibitor indicated for. Colorectal Cancer: 1 adjuvant treatment of patients with Stage III colon cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1), 2 perioperative treatment of adults with locally advanced rectal cancer as a component of chemoradiotherapy. (1.1), 3 treatment of patients with unresectable or metastatic colorectal cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1).</IndicationAndUsage>
    <Description>Capecitabine is a nucleoside metabolic inhibitor. The chemical name is 5’-deoxy-5-fluoro-N-[(pentyloxy) carbonyl]-cytidine and has a molecular formula of C15H22FN3O6 and a molecular weight of 359.35. Capecitabine has the following structural formula. Capecitabine is a white to off-white crystalline powder with an aqueous solubility of 26 mg/mL at 20ºC. Capecitabine tablets, USP are supplied as oval, biconvex, film-coated tablets for oral administration. Each light peach colored tablets debossed with ‘150’ on one side and plain on other side contains 150 mg of capecitabine USP and each peach colored tablet debossed with ‘500’ on one side and plain on other side contains 500 mg of capecitabine USP. The inactive ingredients in capecitabine tablets include: microcrystalline cellulose, croscarmellose sodium, hypromellose, anhydrous lactose, talc and magnesium stearate. The peach or light peach film coating contains hypromellose, titanium dioxide, lactose monohydrate, polyethylene glycol, red iron oxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62756-239-20</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (62756-239-20) </PackageDescription>
    <NDC11Code>62756-0239-20</NDC11Code>
    <ProductNDC>62756-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Capecitabine</ProprietaryName>
    <NonProprietaryName>Capecitabine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204668</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CAPECITABINE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Capecitabine is a nucleoside metabolic inhibitor indicated for. Colorectal Cancer: 1 adjuvant treatment of patients with Stage III colon cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1), 2 perioperative treatment of adults with locally advanced rectal cancer as a component of chemoradiotherapy. (1.1), 3 treatment of patients with unresectable or metastatic colorectal cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1).</IndicationAndUsage>
    <Description>Capecitabine is a nucleoside metabolic inhibitor. The chemical name is 5’-deoxy-5-fluoro-N-[(pentyloxy) carbonyl]-cytidine and has a molecular formula of C15H22FN3O6 and a molecular weight of 359.35. Capecitabine has the following structural formula. Capecitabine is a white to off-white crystalline powder with an aqueous solubility of 26 mg/mL at 20ºC. Capecitabine tablets, USP are supplied as oval, biconvex, film-coated tablets for oral administration. Each light peach colored tablets debossed with ‘150’ on one side and plain on other side contains 150 mg of capecitabine USP and each peach colored tablet debossed with ‘500’ on one side and plain on other side contains 500 mg of capecitabine USP. The inactive ingredients in capecitabine tablets include: microcrystalline cellulose, croscarmellose sodium, hypromellose, anhydrous lactose, talc and magnesium stearate. The peach or light peach film coating contains hypromellose, titanium dioxide, lactose monohydrate, polyethylene glycol, red iron oxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62756-239-83</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62756-239-83) </PackageDescription>
    <NDC11Code>62756-0239-83</NDC11Code>
    <ProductNDC>62756-239</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Capecitabine</ProprietaryName>
    <NonProprietaryName>Capecitabine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204668</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CAPECITABINE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Capecitabine is a nucleoside metabolic inhibitor indicated for. Colorectal Cancer: 1 adjuvant treatment of patients with Stage III colon cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1), 2 perioperative treatment of adults with locally advanced rectal cancer as a component of chemoradiotherapy. (1.1), 3 treatment of patients with unresectable or metastatic colorectal cancer as a single agent or as a component of a combination chemotherapy regimen. (1.1).</IndicationAndUsage>
    <Description>Capecitabine is a nucleoside metabolic inhibitor. The chemical name is 5’-deoxy-5-fluoro-N-[(pentyloxy) carbonyl]-cytidine and has a molecular formula of C15H22FN3O6 and a molecular weight of 359.35. Capecitabine has the following structural formula. Capecitabine is a white to off-white crystalline powder with an aqueous solubility of 26 mg/mL at 20ºC. Capecitabine tablets, USP are supplied as oval, biconvex, film-coated tablets for oral administration. Each light peach colored tablets debossed with ‘150’ on one side and plain on other side contains 150 mg of capecitabine USP and each peach colored tablet debossed with ‘500’ on one side and plain on other side contains 500 mg of capecitabine USP. The inactive ingredients in capecitabine tablets include: microcrystalline cellulose, croscarmellose sodium, hypromellose, anhydrous lactose, talc and magnesium stearate. The peach or light peach film coating contains hypromellose, titanium dioxide, lactose monohydrate, polyethylene glycol, red iron oxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>73377-239-01</NDCCode>
    <PackageDescription>2500 g in 1 DRUM (73377-239-01) </PackageDescription>
    <NDC11Code>73377-0239-01</NDC11Code>
    <ProductNDC>73377-239</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Bupivacaine Hcl</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20230627</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>AX Pharmaceutical Corp</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-02-26</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>27-JUN-23</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>73377-239-02</NDCCode>
    <PackageDescription>100 g in 1 JAR (73377-239-02) </PackageDescription>
    <NDC11Code>73377-0239-02</NDC11Code>
    <ProductNDC>73377-239</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Bupivacaine Hcl</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20230627</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>AX Pharmaceutical Corp</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-02-26</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>26-FEB-25</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>73377-239-03</NDCCode>
    <PackageDescription>800 g in 1 JAR (73377-239-03) </PackageDescription>
    <NDC11Code>73377-0239-03</NDC11Code>
    <ProductNDC>73377-239</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Bupivacaine Hcl</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20230627</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>AX Pharmaceutical Corp</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-02-26</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>25-FEB-26</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>25021-144-99</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (25021-144-99)  / 100 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>25021-0144-99</NDC11Code>
    <ProductNDC>25021-144</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065403</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>100; 50</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection, USP and other antibacterial drugs, Ampicillin and Sulbactam for Injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is:. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is:. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each sterile Pharmacy Bulk Package contains 15 grams Ampicillin and Sulbactam for Injection, USP (equivalent to 10 grams ampicillin as the sodium salt plus 5 grams sulbactam as the sodium salt). The sodium content is approximately 1150 mg (50 mEq) sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation of ampicillin sodium and sulbactam sodium for parenteral use that contains many single doses. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package.) FURTHER DILUTION IS REQUIRED BEFORE USE.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-147-20</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-147-20)  / 15 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0147-20</NDC11Code>
    <ProductNDC>25021-147</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218140</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/15mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1) , 2 Infective Endocarditis (1.2) , 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4) , 5 Lower Respiratory Tract Infections (1.5) .</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24  HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg, 1.28 grams, or 1.54 grams of vancomycin hydrochloride, USP equivalent to 750 mg, 1.25 grams, or 1.5 grams of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-148-30</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-148-30)  / 25 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0148-30</NDC11Code>
    <ProductNDC>25021-148</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218140</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>g/25mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1) , 2 Infective Endocarditis (1.2) , 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4) , 5 Lower Respiratory Tract Infections (1.5) .</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24  HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg, 1.28 grams, or 1.54 grams of vancomycin hydrochloride, USP equivalent to 750 mg, 1.25 grams, or 1.5 grams of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-149-30</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-149-30)  / 30 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0149-30</NDC11Code>
    <ProductNDC>25021-149</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218140</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1.5</StrengthNumber>
    <StrengthUnit>g/30mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1) , 2 Infective Endocarditis (1.2) , 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4) , 5 Lower Respiratory Tract Infections (1.5) .</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24  HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg, 1.28 grams, or 1.54 grams of vancomycin hydrochloride, USP equivalent to 750 mg, 1.25 grams, or 1.5 grams of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-150-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-150-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0150-10</NDC11Code>
    <ProductNDC>25021-150</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205694</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3- amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-151-20</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-151-20)  / 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0151-20</NDC11Code>
    <ProductNDC>25021-151</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205694</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3- amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-157-99</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (25021-157-99)  / 100 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>25021-0157-99</NDC11Code>
    <ProductNDC>25021-157</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120920</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200837</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120920</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of Vancomycin Hydrochloride for Injection, USP may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is an off white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin Hydrochloride for Injection, USP is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro- 7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.73. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-158-99</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (25021-158-99)  / 100 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>25021-0158-99</NDC11Code>
    <ProductNDC>25021-158</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120920</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200837</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120920</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of Vancomycin Hydrochloride for Injection, USP may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is an off white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin Hydrochloride for Injection, USP is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro- 7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.73. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-190-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-190-10)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0190-10</NDC11Code>
    <ProductNDC>25021-190</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-190-11</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-190-11)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0190-11</NDC11Code>
    <ProductNDC>25021-190</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-190-12</NDCCode>
    <PackageDescription>20 VIAL in 1 CARTON (25021-190-12)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0190-12</NDC11Code>
    <ProductNDC>25021-190</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-191-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-191-10)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0191-10</NDC11Code>
    <ProductNDC>25021-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-191-11</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-191-11)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0191-11</NDC11Code>
    <ProductNDC>25021-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-191-12</NDCCode>
    <PackageDescription>20 VIAL in 1 CARTON (25021-191-12)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0191-12</NDC11Code>
    <ProductNDC>25021-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213363</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: : 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]. , 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration (2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as:. Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is:. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-194-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-194-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0194-10</NDC11Code>
    <ProductNDC>25021-194</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207092</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-195-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-195-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0195-10</NDC11Code>
    <ProductNDC>25021-195</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207092</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>7</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
</NDCList>