{
"NDC": [
{
"NDCCode": "25021-655-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-655-05) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0655-05",
"ProductNDC": "25021-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090315",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-05-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "25021-655-02",
"PackageDescription": "10 VIAL in 1 CARTON (25021-655-02) / 2 mL in 1 VIAL",
"NDC11Code": "25021-0655-02",
"ProductNDC": "25021-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090696",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120319",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam Injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg per mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "31722-655-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (31722-655-05) ",
"NDC11Code": "31722-0655-05",
"ProductNDC": "31722-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212278",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220207",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "42549-655-05",
"PackageDescription": "5 TABLET in 1 BOTTLE (42549-655-05)",
"NDC11Code": "42549-0655-05",
"ProductNDC": "42549-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19911031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072927",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium."
},
{
"NDCCode": "43598-655-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43598-655-05) ",
"NDC11Code": "43598-0655-05",
"ProductNDC": "43598-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207479",
"LabelerName": "Dr Reddys Laboratories Inc",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170412",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for: 1 treatment of major depressive disorder (MDD) ( 1.1) , 2 prevention of seasonal affective disorder (SAD) ( 1.2) .",
"Description": "Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2- [(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg, white to pale yellow extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: colloidal silicon dioxide, copovidone, hydrochloric acid, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, polysorbate 80, polyvinyl alcohol, silicon dioxide, talc, and triethyl citrate. This product meets the requirements of USP Dissolution Test 4."
},
{
"NDCCode": "65841-655-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (65841-655-05) ",
"NDC11Code": "65841-0655-05",
"ProductNDC": "65841-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramipril",
"NonProprietaryName": "Ramipril",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20101120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078832",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "RAMIPRIL",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101120",
"SamplePackage": "N"
},
{
"NDCCode": "67877-655-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (67877-655-05) ",
"NDC11Code": "67877-0655-05",
"ProductNDC": "67877-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmethylphenidate Hydrochloride",
"NonProprietaryName": "Dexmethylphenidate Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212631",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "DEXMETHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190721",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmethylphenidate hydrochloride is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) [see Clinical Studies (14)].",
"Description": "Dexmethylphenidate hydrochloride tablet contains dexmethylphenidate hydrochloride, a CNS stimulant. Dexmethylphenidate hydrochloride is the d-threo enantiomer of racemic methylphenidate hydrochloride. Dexmethylphenidate hydrochloride is available as 2.5 mg, 5 mg, and 10 mg strength tablets for oral administration. Chemically, dexmethylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, (R,R’)-(+)-. Its molecular formula is C14H19NO2HCl. Its structural formula is. Note: * = asymmetric carbon centers. Dexmethylphenidate hydrochloride is a white to off-white powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: anhydrous lactose, citric acid anhydrous, colloidal silicon dioxide, D & C Yellow # 10 (5 mg tablets), Lake Pigment HT 5516 FD&C Blue # 1 (2.5 mg tablets), magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate; the 10 mg tablet contains no dye."
},
{
"NDCCode": "68382-655-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (68382-655-05) ",
"NDC11Code": "68382-0655-05",
"ProductNDC": "68382-655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyburide And Metformin Hydrochloride",
"NonProprietaryName": "Glyburide And Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206748",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "GLYBURIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160407",
"SamplePackage": "N",
"IndicationAndUsage": "Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin)."
},
{
"NDCCode": "68428-655-05",
"PackageDescription": "150 PELLET in 1 VIAL, GLASS (68428-655-05) ",
"NDC11Code": "68428-0655-05",
"ProductNDC": "68428-655",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sulphur",
"NonProprietaryName": "Sulfur",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "SULFUR",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N",
"IndicationAndUsage": "Indications. SULPHUR Skin problems."
},
{
"NDCCode": "71052-655-05",
"PackageDescription": "50 g in 1 CONTAINER (71052-655-05) ",
"NDC11Code": "71052-0655-05",
"ProductNDC": "71052-655",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium 2,3-dimercaptopropanesulfonate Monohydrate(dmps Monohydrate)",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190925",
"EndMarketingDate": "20301231",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "2,3-DIMERCAPTO-1-PROPANESULFONIC ACID",
"StrengthNumber": "50",
"StrengthUnit": "g/50g",
"Status": "Unfinished",
"LastUpdate": "2026-07-21",
"StartMarketingDatePackage": "25-SEP-19",
"EndMarketingDatePackage": "31-DEC-30"
},
{
"NDCCode": "75839-655-05",
"PackageDescription": "50 g in 1 CONTAINER (75839-655-05)",
"NDC11Code": "75839-0655-05",
"ProductNDC": "75839-655",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium 2,3-dimercaptopropanesulfonate Monohydrate(dmps Monohydrate)",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190925",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Attix Pharmaceuticals",
"SubstanceName": "2,3-DIMERCAPTO-1-PROPANESULFONIC ACID",
"StrengthNumber": "50",
"StrengthUnit": "g/50g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "25021-002-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-002-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0002-05",
"ProductNDC": "25021-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travoprost Ophthalmic Soluton",
"NonProprietaryName": "Travoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218159",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TRAVOPROST",
"StrengthNumber": ".04",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system."
},
{
"NDCCode": "25021-008-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-008-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0008-05",
"ProductNDC": "25021-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION, GEL FORMING / DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214645",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "25021-009-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-009-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "25021-0009-05",
"ProductNDC": "25021-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION, GEL FORMING / DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214645",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "25021-052-05",
"PackageDescription": "25 VIAL in 1 CARTON (25021-052-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0052-05",
"ProductNDC": "25021-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215654",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .",
"Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
},
{
"NDCCode": "25021-054-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-054-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0054-05",
"ProductNDC": "25021-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRAMUSCULAR",
"StartMarketingDate": "20260301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218601",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP with 0.66% sodium chloride for isotonicity, 0.94% (v/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. Triamcinolone acetonide occurs as a white to almost-white, crystalline powder and is sparingly soluble in alcohol, methanol and chloroform; very slightly soluble in ether; practically insoluble in water."
},
{
"NDCCode": "25021-202-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-202-05) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0202-05",
"ProductNDC": "25021-202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077096",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-containing Compounds [EXT],Platinum-based Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-10-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "25021-204-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-204-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0204-05",
"ProductNDC": "25021-204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vinorelbine",
"NonProprietaryName": "Vinorelbine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091106",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "VINORELBINE TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Vinca Alkaloid [EPC], Vinca Alkaloids [CS]",
"Status": "Active",
"LastUpdate": "2024-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140915",
"SamplePackage": "N",
"IndicationAndUsage": "Vinorelbine Injection is indicated: : 1 In combination with cisplatin for first-line treatment of patients with locally advanced or metastatic non-small cell lung cancer (NSCLC) , 2 As a single agent for the treatment of patients with metastatic NSCLC .",
"Description": "Vinorelbine Injection, USP contains vinorelbine, a semi-synthetic vinca alkaloid. The molecular formula for vinorelbine tartrate is C45H54N4O82C4H6O6. It has a molecular weight of 1079.11. The structural formula is as follows:. Vinorelbine tartrate is a white to light yellow amorphous powder. It is easily soluble in water, very soluble in methanol and practically insoluble in hexane. Vinorelbine Injection, USP is a sterile nonpyrogenic aqueous solution for intravenous use. Each milliliter of solution contains 10 mg vinorelbine (equivalent to 13.85 mg vinorelbine tartrate) in Water for Injection, USP. The pH of Vinorelbine Injection, USP is approximately 3.5."
},
{
"NDCCode": "25021-205-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-205-05) > 2 mL in 1 VIAL",
"NDC11Code": "25021-0205-05",
"ProductNDC": "25021-205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fludarabine Phosphate",
"NonProprietaryName": "Fludarabine Phosphate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078610",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "FLUDARABINE PHOSPHATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-10-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "25021-207-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-207-05) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0207-05",
"ProductNDC": "25021-207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091495",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [CS],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20131031",
"SamplePackage": "N"
},
{
"NDCCode": "25021-213-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-213-05) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0213-05",
"ProductNDC": "25021-213",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090130",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-10-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "25021-214-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-214-05) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0214-05",
"ProductNDC": "25021-214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irinotecan Hydrochloride",
"NonProprietaryName": "Irinotecan Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078589",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "IRINOTECAN HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-10"
},
{
"NDCCode": "25021-229-05",
"PackageDescription": "5 VIAL in 1 CARTON (25021-229-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0229-05",
"ProductNDC": "25021-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cytarabine",
"NonProprietaryName": "Cytarabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211937",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CYTARABINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.",
"Description": "Cytarabine Injection, an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform."
},
{
"NDCCode": "25021-230-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-230-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0230-05",
"ProductNDC": "25021-230",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irinotecan Hydrochloride",
"NonProprietaryName": "Irinotecan Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140815",
"EndMarketingDate": "20261031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090675",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "IRINOTECAN HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140815",
"EndMarketingDatePackage": "20260831",
"SamplePackage": "N",
"IndicationAndUsage": "Irinotecan Hydrochloride Injection is indicated as a component of first-line therapy in combination with 5-fluorouracil (5-FU) and leucovorin (LV) for patients with metastatic carcinoma of the colon or rectum. Irinotecan Hydrochloride Injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.",
"Description": "Irinotecan Hydrochloride Injection, USP is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan Hydrochloride Injection, USP is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide and/or hydrochloric acid. Irinotecan Hydrochloride Injection, USP is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP. Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminata or is chemically synthesized. The chemical name is (S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1H-pyrano[3',4':6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4'bipiperidine]-1'-carboxylate, monohydrochloride, trihydrate. Its empirical formula is C33H38N4O6HCl3H2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:."
},
{
"NDCCode": "25021-239-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL",
"NDC11Code": "25021-0239-05",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "25021-255-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-255-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0255-05",
"ProductNDC": "25021-255",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207326",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240201",
"SamplePackage": "N",
"IndicationAndUsage": "Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, paclitaxel is indicated in combination with cisplatin. Paclitaxel is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptor-negative tumors. (See CLINICAL STUDIES: Breast Carcinoma.). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel, in combination with cisplatin, is indicated for the first-line treatment of nonsmall cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel is indicated for the second-line treatment of AIDS-related Kaposi's sarcoma.",
"Description": "Paclitaxel Injection, USP is a clear colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multi-dose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, 527 mg of Polyoxyl 35 Castor Oil, NF, 49.7% (v/v) Dehydrated Alcohol, USP and 2 mg Citric Acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via an extraction process from Taxus X media ‘Hicksii’. The chemical name for paclitaxel is (2aR,4S,4aS,6R,9S,11S,12S,12aR,12bS)-1,2a,3,4,4a,6,9,10,11,12,12a,12b-Dodecahydro-4,6,9,11,12,-12b-hexahydroxy-4a,8,13,13-tetramethyl-7,11-methano-5H-cyclodeca [3,4] benz [1,2-b] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula:. Paclitaxel is a white to off-white crystalline powder with the empirical formula C47H51NO14 and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216 to 217°C."
},
{
"NDCCode": "25021-303-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-303-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0303-05",
"ProductNDC": "25021-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol Tartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204205",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100510",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol tartrate injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.",
"Description": "Metoprolol tartrate USP, is a selective beta1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, and its structural formula is:. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether."
},
{
"NDCCode": "25021-319-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-319-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0319-05",
"ProductNDC": "25021-319",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074617",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride injection is indicated for the following:.",
"Description": "Diltiazem Hydrochloride Injection is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The structural formula is:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem Hydrochloride Injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem Hydrochloride Injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains 5 mg of diltiazem hydrochloride, 0.75 mg citric acid (hydrous), USP, 0.65 mg sodium citrate dihydrate, USP, 71.4 mg sorbitol solution, USP, and water for injection, USP. Sodium hydroxide or hydrochloric acid is used for pH adjustment."
},
{
"NDCCode": "25021-324-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-324-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0324-05",
"ProductNDC": "25021-324",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoproterenol Hydrochloride",
"NonProprietaryName": "Isoproterenol Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217648",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ISOPROTERENOL HYDROCHLORIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "Isoproterenol Hydrochloride Injection is indicated: : 1 To improve hemodynamic status in patients in distributive shock and shock due to reduced cardiac output , 2 For bronchospasm occurring during anesthesia .",
"Description": "Isoproterenol hydrochloride is 3,4-Dihydroxy-α-[(isopropylamino)methyl] benzyl alcohol hydrochloride, a beta-adrenergic agonist and a synthetic sympathomimetic amine that is structurally related to epinephrine. The molecular formula is C11H17NO3·HCl. It has a molecular weight of 247.72 and the following structural formula:. Isoproterenol hydrochloride is a racemic compound. Each milliliter of the sterile solution contains:. The pH is adjusted between 3.5 and 4.5 with hydrochloric acid and/or sodium hydroxide. The sterile solution is nonpyrogenic and can be administered by the intravenous route."
},
{
"NDCCode": "25021-405-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-405-05) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "25021-0405-05",
"ProductNDC": "25021-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bivalirudin",
"NonProprietaryName": "Bivalirudin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091602",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "BIVALIRUDIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-coagulant [EPC],Direct Thrombin Inhibitor [EPC],Thrombin Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-12-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>25021-655-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-655-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0655-05</NDC11Code>
<ProductNDC>25021-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090315</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-05-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>25021-655-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-655-02) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0655-02</NDC11Code>
<ProductNDC>25021-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090696</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam Injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg per mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>31722-655-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (31722-655-05) </PackageDescription>
<NDC11Code>31722-0655-05</NDC11Code>
<ProductNDC>31722-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212278</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and in pediatric patients 6 years and older weighing at least 15 kg. Limitations of Use: Atazanavir are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus [see Use in Specific Populations ( 8.4)] . Use of atazanavir with ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology ( 12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is ((3 S,8 S,9 S,12 S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl] 2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate. Its molecular formula is C 38H 52N 6O 7.H 2SO 4which corresponds to a molecular weight of 802.9 (sulphuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula:. Atazanavir sulfate is an off white to pale yellow coloured crystalline powder. It is slightly soluble in water at acidic pH, freely soluble in methanol, soluble in dimethylformamide and dimethylsulfoxide. Atazanavir capsules are available for oral administration in strengths of 150 mg, 200 mg, or 300 mg of atazanavir, which are equivalent to 170.854 mg, 227.805 mg, or 341.708 mg of atazanavir sulfate, respectively. The capsules also contain the following inactive ingredients: crospovidone, lactose monohydrate, and magnesium stearate. The capsule shells contain the following inactive ingredients: gelatin, FD&C Blue 1, iron oxide yellow, titanium dioxide, In addition 150 mg capsule shell contains iron oxide black, 200 mg and 300 mg contains FD&C Yellow 6, 300 mg also contains FD&C Red 3. The capsules are printed with black ink containing iron oxide black, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>42549-655-05</NDCCode>
<PackageDescription>5 TABLET in 1 BOTTLE (42549-655-05)</PackageDescription>
<NDC11Code>42549-0655-05</NDC11Code>
<ProductNDC>42549-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19911031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072927</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>43598-655-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43598-655-05) </PackageDescription>
<NDC11Code>43598-0655-05</NDC11Code>
<ProductNDC>43598-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(xl)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207479</ApplicationNumber>
<LabelerName>Dr Reddys Laboratories Inc</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for: 1 treatment of major depressive disorder (MDD) ( 1.1) , 2 prevention of seasonal affective disorder (SAD) ( 1.2) .</IndicationAndUsage>
<Description>Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2- [(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg, white to pale yellow extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: colloidal silicon dioxide, copovidone, hydrochloric acid, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, polysorbate 80, polyvinyl alcohol, silicon dioxide, talc, and triethyl citrate. This product meets the requirements of USP Dissolution Test 4.</Description>
</NDC>
<NDC>
<NDCCode>65841-655-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (65841-655-05) </PackageDescription>
<NDC11Code>65841-0655-05</NDC11Code>
<ProductNDC>65841-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramipril</ProprietaryName>
<NonProprietaryName>Ramipril</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078832</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>RAMIPRIL</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67877-655-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (67877-655-05) </PackageDescription>
<NDC11Code>67877-0655-05</NDC11Code>
<ProductNDC>67877-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmethylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmethylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212631</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>DEXMETHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmethylphenidate hydrochloride is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Dexmethylphenidate hydrochloride tablet contains dexmethylphenidate hydrochloride, a CNS stimulant. Dexmethylphenidate hydrochloride is the d-threo enantiomer of racemic methylphenidate hydrochloride. Dexmethylphenidate hydrochloride is available as 2.5 mg, 5 mg, and 10 mg strength tablets for oral administration. Chemically, dexmethylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, (R,R’)-(+)-. Its molecular formula is C14H19NO2HCl. Its structural formula is. Note: * = asymmetric carbon centers. Dexmethylphenidate hydrochloride is a white to off-white powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: anhydrous lactose, citric acid anhydrous, colloidal silicon dioxide, D & C Yellow # 10 (5 mg tablets), Lake Pigment HT 5516 FD&C Blue # 1 (2.5 mg tablets), magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate; the 10 mg tablet contains no dye.</Description>
</NDC>
<NDC>
<NDCCode>68382-655-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68382-655-05) </PackageDescription>
<NDC11Code>68382-0655-05</NDC11Code>
<ProductNDC>68382-655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyburide And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Glyburide And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206748</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>GLYBURIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glyburide and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glyburide and metformin hydrochloride tablets, USP for oral use contain glyburide, USP and metformin hydrochloride, USP. Glyburide, USP is a sulfonylurea and its chemical name is 1-[[p-[2-(5-chloro-o-anisamido) ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide, USP is a white or almost white, crystalline powder with a molecular formula of C23H28ClN3O5S and a molecular weight of 494. The glyburide used in glyburide and metformin hydrochloride tablets, USP has a particle size at least 20% are less than 2 micron, at least 80% are less than 10 micron and 100% are less than 40 micron. The structural formula is represented below. Metformin hydrochloride, USP is a biguanide in hydrochloride salt form and its chemical name is N,N-dimethylimidodicarbonimidic diamide monohydrochloride. It is a white crystals with a molecular formula of C4H12ClN5 (monohydrochloride) and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The structural formula is as shown. Glyburide and metformin hydrochloride tablets, USP are available in film coated tablets containing: 1 1.25 mg glyburide, USP and 250 mg metformin hydrochloride, USP (equivalent to 194.97 mg metformin);, 2 2.5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin);, 3 5 mg glyburide, USP and 500 mg metformin hydrochloride, USP (equivalent to 389.93 mg metformin).</Description>
</NDC>
<NDC>
<NDCCode>68428-655-05</NDCCode>
<PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-655-05) </PackageDescription>
<NDC11Code>68428-0655-05</NDC11Code>
<ProductNDC>68428-655</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sulphur</ProprietaryName>
<NonProprietaryName>Sulfur</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>SULFUR</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications. SULPHUR Skin problems.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71052-655-05</NDCCode>
<PackageDescription>50 g in 1 CONTAINER (71052-655-05) </PackageDescription>
<NDC11Code>71052-0655-05</NDC11Code>
<ProductNDC>71052-655</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium 2,3-dimercaptopropanesulfonate Monohydrate(dmps Monohydrate)</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190925</StartMarketingDate>
<EndMarketingDate>20301231</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>2,3-DIMERCAPTO-1-PROPANESULFONIC ACID</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/50g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-07-21</LastUpdate>
<StartMarketingDatePackage>25-SEP-19</StartMarketingDatePackage>
<EndMarketingDatePackage>31-DEC-30</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>75839-655-05</NDCCode>
<PackageDescription>50 g in 1 CONTAINER (75839-655-05)</PackageDescription>
<NDC11Code>75839-0655-05</NDC11Code>
<ProductNDC>75839-655</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium 2,3-dimercaptopropanesulfonate Monohydrate(dmps Monohydrate)</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190925</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Attix Pharmaceuticals</LabelerName>
<SubstanceName>2,3-DIMERCAPTO-1-PROPANESULFONIC ACID</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>g/50g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>25021-002-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-002-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0002-05</NDC11Code>
<ProductNDC>25021-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travoprost Ophthalmic Soluton</ProprietaryName>
<NonProprietaryName>Travoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218159</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TRAVOPROST</SubstanceName>
<StrengthNumber>.04</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Travoprost Ophthalmic Solution (ionic buffered solution) 0.004% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is:. Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system.</Description>
</NDC>
<NDC>
<NDCCode>25021-008-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-008-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0008-05</NDC11Code>
<ProductNDC>25021-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION, GEL FORMING / DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214645</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>25021-009-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-009-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0009-05</NDC11Code>
<ProductNDC>25021-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION, GEL FORMING / DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214645</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol Maleate Ophthalmic Gel Forming Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. 25°[α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>25021-052-05</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-052-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0052-05</NDC11Code>
<ProductNDC>25021-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215654</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows:. 1. Endocrine Disorders: 1 Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). , 2 Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). , 3 Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. , 4 Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. , 5 Congenital adrenal hyperplasia. , 6 Nonsuppurative thyroiditis. , 7 Hypercalcemia associated with cancer. .</IndicationAndUsage>
<Description>Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP C22H28FNa2O8P, has a molecular weight of 516.4 and chemically is 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione, 21-(dihydrogen phosphate) disodium salt. It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula:. Dexamethasone Sodium Phosphate Injection, USP is available in 4 mg per mL and 10 mg per mL concentrations. Each mL of Dexamethasone Sodium Phosphate Injection USP, 4 mg per mL contains dexamethasone sodium phosphate, USP equivalent to 4 mg of dexamethasone phosphate; 11 mg sodium citrate anhydrous; 1 mg sodium sulfite; 10 mg benzyl alcohol (preservative); water for injection, q.s. NaOH and/or citric acid monohydrate to adjust pH if necessary. pH: 7.0 to 8.5. Each mL of Dexamethasone Sodium Phosphate Injection, USP, 10 mg per mL (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-054-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-054-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0054-05</NDC11Code>
<ProductNDC>25021-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20260301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218601</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP with 0.66% sodium chloride for isotonicity, 0.94% (v/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. Triamcinolone acetonide occurs as a white to almost-white, crystalline powder and is sparingly soluble in alcohol, methanol and chloroform; very slightly soluble in ether; practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>25021-202-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-202-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0202-05</NDC11Code>
<ProductNDC>25021-202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077096</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-containing Compounds [EXT],Platinum-based Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>25021-204-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-204-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0204-05</NDC11Code>
<ProductNDC>25021-204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vinorelbine</ProprietaryName>
<NonProprietaryName>Vinorelbine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091106</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>VINORELBINE TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Vinca Alkaloid [EPC], Vinca Alkaloids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vinorelbine Injection is indicated: : 1 In combination with cisplatin for first-line treatment of patients with locally advanced or metastatic non-small cell lung cancer (NSCLC) , 2 As a single agent for the treatment of patients with metastatic NSCLC .</IndicationAndUsage>
<Description>Vinorelbine Injection, USP contains vinorelbine, a semi-synthetic vinca alkaloid. The molecular formula for vinorelbine tartrate is C45H54N4O82C4H6O6. It has a molecular weight of 1079.11. The structural formula is as follows:. Vinorelbine tartrate is a white to light yellow amorphous powder. It is easily soluble in water, very soluble in methanol and practically insoluble in hexane. Vinorelbine Injection, USP is a sterile nonpyrogenic aqueous solution for intravenous use. Each milliliter of solution contains 10 mg vinorelbine (equivalent to 13.85 mg vinorelbine tartrate) in Water for Injection, USP. The pH of Vinorelbine Injection, USP is approximately 3.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-205-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-205-05) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0205-05</NDC11Code>
<ProductNDC>25021-205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fludarabine Phosphate</ProprietaryName>
<NonProprietaryName>Fludarabine Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078610</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>FLUDARABINE PHOSPHATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-10-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>25021-207-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-207-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0207-05</NDC11Code>
<ProductNDC>25021-207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091495</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [CS],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>25021-213-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-213-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0213-05</NDC11Code>
<ProductNDC>25021-213</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090130</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-10-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>25021-214-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-214-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0214-05</NDC11Code>
<ProductNDC>25021-214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irinotecan Hydrochloride</ProprietaryName>
<NonProprietaryName>Irinotecan Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078589</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>25021-229-05</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (25021-229-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0229-05</NDC11Code>
<ProductNDC>25021-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cytarabine</ProprietaryName>
<NonProprietaryName>Cytarabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211937</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CYTARABINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
<Description>Cytarabine Injection, an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
</NDC>
<NDC>
<NDCCode>25021-230-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-230-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0230-05</NDC11Code>
<ProductNDC>25021-230</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irinotecan Hydrochloride</ProprietaryName>
<NonProprietaryName>Irinotecan Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140815</StartMarketingDate>
<EndMarketingDate>20261031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090675</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140815</StartMarketingDatePackage>
<EndMarketingDatePackage>20260831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irinotecan Hydrochloride Injection is indicated as a component of first-line therapy in combination with 5-fluorouracil (5-FU) and leucovorin (LV) for patients with metastatic carcinoma of the colon or rectum. Irinotecan Hydrochloride Injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.</IndicationAndUsage>
<Description>Irinotecan Hydrochloride Injection, USP is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan Hydrochloride Injection, USP is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide and/or hydrochloric acid. Irinotecan Hydrochloride Injection, USP is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP. Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminata or is chemically synthesized. The chemical name is (S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1H-pyrano[3',4':6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4'bipiperidine]-1'-carboxylate, monohydrochloride, trihydrate. Its empirical formula is C33H38N4O6HCl3H2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-05</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-255-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-255-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0255-05</NDC11Code>
<ProductNDC>25021-255</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207326</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, paclitaxel is indicated in combination with cisplatin. Paclitaxel is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptor-negative tumors. (See CLINICAL STUDIES: Breast Carcinoma.). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel, in combination with cisplatin, is indicated for the first-line treatment of nonsmall cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel is indicated for the second-line treatment of AIDS-related Kaposi's sarcoma.</IndicationAndUsage>
<Description>Paclitaxel Injection, USP is a clear colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multi-dose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, 527 mg of Polyoxyl 35 Castor Oil, NF, 49.7% (v/v) Dehydrated Alcohol, USP and 2 mg Citric Acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via an extraction process from Taxus X media ‘Hicksii’. The chemical name for paclitaxel is (2aR,4S,4aS,6R,9S,11S,12S,12aR,12bS)-1,2a,3,4,4a,6,9,10,11,12,12a,12b-Dodecahydro-4,6,9,11,12,-12b-hexahydroxy-4a,8,13,13-tetramethyl-7,11-methano-5H-cyclodeca [3,4] benz [1,2-b] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula:. Paclitaxel is a white to off-white crystalline powder with the empirical formula C47H51NO14 and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216 to 217°C.</Description>
</NDC>
<NDC>
<NDCCode>25021-303-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-303-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0303-05</NDC11Code>
<ProductNDC>25021-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204205</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol tartrate injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.</IndicationAndUsage>
<Description>Metoprolol tartrate USP, is a selective beta1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, and its structural formula is:. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>25021-319-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-319-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0319-05</NDC11Code>
<ProductNDC>25021-319</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074617</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride injection is indicated for the following:.</IndicationAndUsage>
<Description>Diltiazem Hydrochloride Injection is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The structural formula is:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem Hydrochloride Injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem Hydrochloride Injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains 5 mg of diltiazem hydrochloride, 0.75 mg citric acid (hydrous), USP, 0.65 mg sodium citrate dihydrate, USP, 71.4 mg sorbitol solution, USP, and water for injection, USP. Sodium hydroxide or hydrochloric acid is used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-324-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-324-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0324-05</NDC11Code>
<ProductNDC>25021-324</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoproterenol Hydrochloride</ProprietaryName>
<NonProprietaryName>Isoproterenol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217648</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ISOPROTERENOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoproterenol Hydrochloride Injection is indicated: : 1 To improve hemodynamic status in patients in distributive shock and shock due to reduced cardiac output , 2 For bronchospasm occurring during anesthesia .</IndicationAndUsage>
<Description>Isoproterenol hydrochloride is 3,4-Dihydroxy-α-[(isopropylamino)methyl] benzyl alcohol hydrochloride, a beta-adrenergic agonist and a synthetic sympathomimetic amine that is structurally related to epinephrine. The molecular formula is C11H17NO3·HCl. It has a molecular weight of 247.72 and the following structural formula:. Isoproterenol hydrochloride is a racemic compound. Each milliliter of the sterile solution contains:. The pH is adjusted between 3.5 and 4.5 with hydrochloric acid and/or sodium hydroxide. The sterile solution is nonpyrogenic and can be administered by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>25021-405-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-405-05) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>25021-0405-05</NDC11Code>
<ProductNDC>25021-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bivalirudin</ProprietaryName>
<NonProprietaryName>Bivalirudin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091602</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>BIVALIRUDIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC],Direct Thrombin Inhibitor [EPC],Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>