{
"NDC": [
{
"NDCCode": "30142-285-22",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (30142-285-22) > 120 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC",
"NDC11Code": "30142-0285-22",
"ProductNDC": "30142-285",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naproxen Sodium",
"NonProprietaryName": "Naproxen Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20190201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021920",
"LabelerName": "KROGER COMPANY",
"SubstanceName": "NAPROXEN SODIUM",
"StrengthNumber": "220",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191009",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever."
},
{
"NDCCode": "30142-285-78",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (30142-285-78) > 80 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC",
"NDC11Code": "30142-0285-78",
"ProductNDC": "30142-285",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naproxen Sodium",
"NonProprietaryName": "Naproxen Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20190201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021920",
"LabelerName": "KROGER COMPANY",
"SubstanceName": "NAPROXEN SODIUM",
"StrengthNumber": "220",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190604",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever."
},
{
"NDCCode": "13668-285-22",
"PackageDescription": "8 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (13668-285-22) ",
"NDC11Code": "13668-0285-22",
"ProductNDC": "13668-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbamazepine",
"NonProprietaryName": "Carbamazepine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212524",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "CARBAMAZEPINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250910",
"SamplePackage": "N",
"IndicationAndUsage": "Carbamazepine is indicated for use as an anticonvulsant drug. Evidence supporting efficacy of carbamazepine as an anticonvulsant was derived from active drug-controlled studies that enrolled patients with the following seizure types: 1 Partial seizures with complex symptomatology (psychomotor, temporal lobe). Patients with these seizures appear to show greater improvement than those with other types., 2 Generalized tonic-clonic seizures (grand mal)., 3 Mixed seizure patterns which include the above, or other partial or generalized seizures. Absence seizures (petit mal) do not appear to be controlled by carbamazepine (see PRECAUTIONS, General).",
"Description": "Carbamazepine USP, is an anticonvulsant and specific analgesic for trigeminal neuralgia, available for oral administration as extended-release tablets of 100, 200, and 400 mg. Its chemical name is 5H-dibenz[b,f ]azepine-5-carboxamide, and its structural formula is. Carbamazepine USP is a white to off-white powder, practically insoluble in water and soluble in alcohol and in acetone. Its molecular weight is 236.27 g/mol. Inactive Ingredients Tablets: Cellulose acetate (CA-320S), cellulose acetate (CA-398-10), dextrates (milled), ferric oxide red (200 mg and 400 tablets only), ferric oxide yellow (100 mg and 400 mg tablets only), hydroxyethyl cellulose (natrosol 250 HX), hydroxyethyl cellulose (natrosol 250L), hypromellose E 15 LV, hypromellose-3 cps, magnesium stearate, mannitol 25, polyethylene glycol 8000, sodium lauryl sulfate, titanium dioxide (200 mg tablets only). The imprinting ink contains ferrosoferric oxide, propylene glycol and shellac. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "41250-285-22",
"PackageDescription": "120 CAPSULE, LIQUID FILLED in 1 BOTTLE (41250-285-22) ",
"NDC11Code": "41250-0285-22",
"ProductNDC": "41250-285",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ibuprofen Pm",
"NonProprietaryName": "Ibuprofen, Diphenhydramine Hcl",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20210224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090397",
"LabelerName": "MEIJER DISTRIBUTION INC.",
"SubstanceName": "IBUPROFEN; DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "200; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210224",
"SamplePackage": "N",
"IndicationAndUsage": "■ for relief of occasional sleeplessness when associated with minor aches and pains. ■ helps you fall asleep and stay asleep."
},
{
"NDCCode": "61786-285-22",
"PackageDescription": "2.5 mL in 1 VIAL (61786-285-22) ",
"NDC11Code": "61786-0285-22",
"ProductNDC": "61786-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide",
"NonProprietaryName": "Ipratropium Bromide",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20171218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075693",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "IPRATROPIUM BROMIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20171218",
"SamplePackage": "N"
},
{
"NDCCode": "68001-285-40",
"PackageDescription": "10 VIAL in 1 CARTON (68001-285-40) > 5 mL in 1 VIAL (68001-285-22)",
"NDC11Code": "68001-0285-40",
"ProductNDC": "68001-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200753",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog [EPC],Folic Acid [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-07-29",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231"
},
{
"NDCCode": "30142-061-22",
"PackageDescription": "15 BLISTER PACK in 1 CARTON (30142-061-22) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "30142-0061-22",
"ProductNDC": "30142-061",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Fexofenadine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076447",
"LabelerName": "Kroger Company",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20110426",
"SamplePackage": "N"
},
{
"NDCCode": "30142-290-22",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (30142-290-22) > 12 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "30142-0290-22",
"ProductNDC": "30142-290",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190515",
"EndMarketingDate": "20230512",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Kroger Company",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190515",
"EndMarketingDatePackage": "20230512",
"SamplePackage": "N"
},
{
"NDCCode": "30142-390-22",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (30142-390-22) / 48 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "30142-0390-22",
"ProductNDC": "30142-390",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menstrual Complete",
"NonProprietaryName": "Acetaminophen, Caffeine, Pyrilamine Maleate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190603",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Kroger Company",
"SubstanceName": "ACETAMINOPHEN; CAFFEINE; PYRILAMINE MALEATE",
"StrengthNumber": "500; 60; 15",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190603",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of these symptoms associated with menstrual periods: 1 bloating, 2 headache, 3 muscle aches, 4 cramps, 5 backache, 6 fatigue, 7 water-weight gain."
},
{
"NDCCode": "30142-571-22",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (30142-571-22) > 5 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "30142-0571-22",
"ProductNDC": "30142-571",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fexo Fenadine",
"NonProprietaryName": "Fexofenadine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076447",
"LabelerName": "Kroger Company",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-18",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "30142-641-22",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (30142-641-22) / 24 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "30142-0641-22",
"ProductNDC": "30142-641",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sinus Decongestion",
"NonProprietaryName": "Pseudoephedrine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210413",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Kroger Company",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210413",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure."
},
{
"NDCCode": "30142-846-22",
"PackageDescription": "15 BLISTER PACK in 1 CARTON (30142-846-22) / 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "30142-0846-22",
"ProductNDC": "30142-846",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Congestion Relief",
"NonProprietaryName": "Loratadine, Pseudoephedrine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075989",
"LabelerName": "Kroger Company",
"SubstanceName": "LORATADINE; PSEUDOEPHEDRINE SULFATE",
"StrengthNumber": "10; 240",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240222",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:. sneezing. itchy, watery eyes. runny nose. itching of the nose or throat. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "30142-901-22",
"PackageDescription": "56 g in 1 BOTTLE, PLASTIC (30142-901-22)",
"NDC11Code": "30142-0901-22",
"ProductNDC": "30142-901",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kroger Sport Sunscreen",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Avobenzone Homosalate Octisalate Octocrylene Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121119",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "THE KROGER CO",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "2; 10; 5; 4; 5",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of activity in the water."
},
{
"NDCCode": "30142-902-22",
"PackageDescription": "56 g in 1 BOTTLE, PLASTIC (30142-902-22)",
"NDC11Code": "30142-0902-22",
"ProductNDC": "30142-902",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kroger Sunscreen",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Avobenzone Homosalate Octisalate Octocrylene Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121119",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "THE KROGER CO",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "2; 10; 5; 2; 2",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of activity in the water."
},
{
"NDCCode": "13533-800-12",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-12) > 10 mL in 1 VIAL, GLASS (13533-800-13) ",
"NDC11Code": "13533-0800-12",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-800-15",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-15) > 25 mL in 1 VIAL, GLASS (13533-800-16) ",
"NDC11Code": "13533-0800-15",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-800-20",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-20) > 50 mL in 1 VIAL, GLASS (13533-800-21) ",
"NDC11Code": "13533-0800-20",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-800-24",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-24) > 200 mL in 1 VIAL, GLASS (13533-800-25) ",
"NDC11Code": "13533-0800-24",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-800-40",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-40) > 400 mL in 1 VIAL, GLASS (13533-800-41) ",
"NDC11Code": "13533-0800-40",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "13533-800-71",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (13533-800-71) > 100 mL in 1 VIAL, GLASS (13533-800-72) ",
"NDC11Code": "13533-0800-71",
"ProductNDC": "13533-800",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Gamunex-c",
"NonProprietaryName": "Immune Globulin (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20101013",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125046",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101013",
"SamplePackage": "N",
"IndicationAndUsage": "GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.",
"Description": "GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "17156-023-05",
"PackageDescription": "1 KIT in 1 CARTON (17156-023-05) * 5 VIAL in 1 TRAY / 1 mL in 1 VIAL * 5 VIAL in 1 TRAY / 4.5 mL in 1 VIAL * 5 VIAL in 1 TRAY (17156-022-05) / 5 mL in 1 VIAL",
"NDC11Code": "17156-0023-05",
"ProductNDC": "17156-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceretec",
"NonProprietaryName": "Exametazime",
"DosageFormName": "KIT",
"StartMarketingDate": "19881230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019829",
"LabelerName": "Medi-Physics Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-02-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19881230",
"SamplePackage": "N",
"IndicationAndUsage": "Technetium Tc99m exametazime scintigraphy (with or without methylene blue stabilization) may be useful as an adjunct in the detection of altered regional cerebral perfusion in stroke. Tc99m exametazime without methylene blue stabilization is indicated for leukocyte labeled scintigraphy as an adjunct in the localization of intra-abdominal infection and inflammatory bowel disease.",
"Description": "The Ceretec kit is supplied as five packs of three vials for use in the preparation of a technetium Tc99m exametazime intravenous injection as a diagnostic radiopharmaceutical for use as an adjunct in the detection of altered regional cerebral perfusion and for the radiolabeling of autologous leukocytes. Each vial of Ceretec contains a pre-dispensed sterile, non-pyrogenic, lyophilized mixture of 0.5 mg exametazime [(RR,SS)-4.8-diaza-3,6,6,9-tetramethylundecane-2, 10-dione bisoxime], 7.6 µg stannous chloride dihydrate (minimum stannous tin 0.6 µg; maximum total stannous and stannic tin 4.0 µg per vial) and 4.5 mg sodium chloride, sealed under nitrogen atmosphere with a rubber closure. The product contains no antimicrobial preservative. In addition, each package contains five 1 mL vials of Methylene Blue Injection USP 1% containing 10 mg methylene blue USP in Water for Injection q.s. pH adjusted with sodium hydroxide and/or hydrochloric acid, when necessary. Methylene Blue Injection USP is a sterile, non-pyrogenic solution of phenothiazin-5-ium,3,7-bis (dimethylamino)-chloride, trihydrate. Each package also contains five 4.5 mL vials of 0.003 M Monobasic Sodium Phosphate USP and Dibasic Sodium Phosphate USP in 0.9% Sodium Chloride Injection USP. The solution is sterile and non-pyrogenic. Each mL contains 0.276 mg monobasic sodium phosphate monohydrate (equivalent to 0.312 mg monobasic sodium phosphate dihydrate), 0.142 mg dibasic sodium phosphate anhydrous (equivalent to 0.178 mg dibasic sodium phosphate dihydrate) and 9 mg sodium chloride in Water for Injection q.s. The total calculated osmolarity of the 0.003 M Monobasic Sodium Phosphate USP and Dibasic Sodium Phosphate USP in 0.9% Sodium Chloride Injection USP is 317 mOsmol/L. Each mL provides 0.285 mg (3mM) of phosphate, 0.157 mEq of sodium and 0.154 mEq of chloride. When used according to the preparation instructions (see DOSAGE AND ADMINISTRATION), Methylene Blue Sodium Phosphates/Sodium Chloride mixture acts as a stabilizer. Prior to publication of the USAN, exametazime was formerly known as hexamethylpropylene amine oxime (HM-PAO). The name HM-PAO appears in many publications. The structural formula of exametazime is. When sterile pyrogen-free sodium pertechnetate Tc99m in isotonic saline is added to the vial of Ceretec, a Tc99m complex of exametazime is formed. Administration is by intravenous injection for diagnostic use."
},
{
"NDCCode": "24470-941-10",
"PackageDescription": "285 g in 1 BOTTLE, PLASTIC (24470-941-10) ",
"NDC11Code": "24470-0941-10",
"ProductNDC": "24470-941",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Plexion",
"NonProprietaryName": "Sulfacetamide Sodium, Sulfur",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Cintex Services, LLC",
"SubstanceName": "SULFACETAMIDE SODIUM; SULFUR",
"StrengthNumber": "98; 48",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Sulfonamide Antibacterial [EPC], Sulfonamides [CS]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.",
"Description": "Each gram contains 98 mg of sodium sulfacetamide and 48 mg of colloidal sulfur in a vehicle consisting of: benzyl alcohol, cetyl alcohol, fragrance, glyceryl stearate (and) PEG-100 stearate, magnesium aluminum silicate, phenoxyethanol, propylene glycol, purified water, sodium lauryl sulfate, sodium lithium magnesium silicate, sodium thiosulfate, stearyl alcohol and xanthan gum. Sodium sulfacetamide is a sulfonamide with antibacterial activity while sulfur acts as a keratolytic agent. Sodium sulfacetamide is C 8H 9N 2NaO 3S·H 2O with molecular weight of 254.24. Chemically, sodium sulfacetamide is N-[(4-aminophenyl) sulfonyl]-acetamide, monosodium salt, monohydrate. The structural formula is:. Sodium sulfacetamide is an odorless, white, crystalline powder with a bitter taste. It is freely soluble in water, sparingly soluble in alcohol, while practically insoluble in benzene, in chloroform and in ether."
},
{
"NDCCode": "24470-948-10",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (24470-948-10) / 10 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "24470-0948-10",
"ProductNDC": "24470-948",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Salicylic Acid",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Cintex Services, LLC",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "285",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for the topical treatment and removal of common warts and plantar warts.",
"Description": "Each mL contains 285 mg of salicylic acid extended release in a film-forming virucidal solution consisting of acrylates copolymer, isopropyl alcohol, n-Butyl acetate, polyvinyl butyral, and trimethyl pentanyl diisobutyrate. The pharmacologic activity of this product is generally attributed to the keratolytic activity of salicylic acid, which is incorporated into a polyacrylic, film-forming virucidal solution designed to cover the wart without the need for a bandage. The structural formula of salicylic acid is."
},
{
"NDCCode": "24470-955-10",
"PackageDescription": "285 g in 1 BOTTLE, PLASTIC (24470-955-10) ",
"NDC11Code": "24470-0955-10",
"ProductNDC": "24470-955",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Sulfacetamide 9.8% And Sulfur 4.8% Cleanser",
"NonProprietaryName": "Sulfacetamide Sodium, Sulfur",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Cintex Services, LLC",
"SubstanceName": "SULFUR; SULFACETAMIDE SODIUM",
"StrengthNumber": "48; 98",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Sulfonamide Antibacterial [EPC], Sulfonamides [CS]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "This product is indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.",
"Description": "Each gram contains 98 mg of sodium sulfacetamide and 48 mg of colloidal sulfur in a vehicle consisting of: benzyl alcohol, cetyl alcohol, fragrance, glyceryl stearate (and) PEG-100 stearate, magnesium aluminum silicate, phenoxyethanol, propylene glycol, purified water, sodium lauryl sulfate, sodium lithium magnesium silicate, sodium thiosulfate, stearyl alcohol and xanthan gum. Sodium sulfacetamide is a sulfonamide with antibacterial activity while sulfur acts as a keratolytic agent. Sodium sulfacetamide is C 8H 9N 2NaO 3S·H 2O with molecular weight of 254.24. Chemically, sodium sulfacetamide is N-[(4-aminophenyl) sulfonyl]-acetamide, monosodium salt, monohydrate. The structural formula is:. Sodium sulfacetamide is an odorless, white, crystalline powder with a bitter taste. It is freely soluble in water, sparingly soluble in alcohol, while practically insoluble in benzene, in chloroform and in ether."
},
{
"NDCCode": "42794-016-22",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (42794-016-22) ",
"NDC11Code": "42794-0016-22",
"ProductNDC": "42794-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asenapine",
"NonProprietaryName": "Asenapine",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20201214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206107",
"LabelerName": "Sigmapharm Laboratories, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201214",
"SamplePackage": "N",
"IndicationAndUsage": "Asenapine sublingual tablet(s) is indicated for: 1 Bipolar I disorder [see Clinical Studies ( 14.2)] Adjunctive treatment to lithium or valproate in adults.",
"Description": "Asenapine sublingual tablet(s) contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3a RS,12b RS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1 Hdibenzo[2,3:6,7]oxepino[4,5- c]pyrrole (2 Z)-2-butenedioate (1:1). Its molecular formula is C 17H 16ClNO⋅C 4H 4O 4and its molecular weight is 401.84 (free base: 285.8). The chemical structure is:. Asenapine maleate is a white to off-white powder. Asenapine sublingual tablet(s), black cherry flavor, is supplied for sublingual administration in tablets containing 5 mg or 10 mg asenapine; inactive ingredients include copovidone, crospovidone, polyoxyl 35 castor oil, mannitol, magnesium stearate, citric acid, butylated hydroxytoluene, silicon dioxide, sodium bicarbonate and black cherry flavor. Black cherry flavor contains maltodextrin, artificial flavors, propylene glycol, triethyl citrate, and caramel color."
},
{
"NDCCode": "42794-017-22",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (42794-017-22) ",
"NDC11Code": "42794-0017-22",
"ProductNDC": "42794-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asenapine",
"NonProprietaryName": "Asenapine",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20201214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206107",
"LabelerName": "Sigmapharm Laboratories, LLC",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201214",
"SamplePackage": "N",
"IndicationAndUsage": "Asenapine sublingual tablet(s) is indicated for: 1 Bipolar I disorder [see Clinical Studies ( 14.2)] Adjunctive treatment to lithium or valproate in adults.",
"Description": "Asenapine sublingual tablet(s) contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3a RS,12b RS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1 Hdibenzo[2,3:6,7]oxepino[4,5- c]pyrrole (2 Z)-2-butenedioate (1:1). Its molecular formula is C 17H 16ClNO⋅C 4H 4O 4and its molecular weight is 401.84 (free base: 285.8). The chemical structure is:. Asenapine maleate is a white to off-white powder. Asenapine sublingual tablet(s), black cherry flavor, is supplied for sublingual administration in tablets containing 5 mg or 10 mg asenapine; inactive ingredients include copovidone, crospovidone, polyoxyl 35 castor oil, mannitol, magnesium stearate, citric acid, butylated hydroxytoluene, silicon dioxide, sodium bicarbonate and black cherry flavor. Black cherry flavor contains maltodextrin, artificial flavors, propylene glycol, triethyl citrate, and caramel color."
},
{
"NDCCode": "50268-476-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX (50268-476-15) / 1 TABLET in 1 BLISTER PACK (50268-476-11) ",
"NDC11Code": "50268-0476-15",
"ProductNDC": "50268-476",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Letrozole",
"NonProprietaryName": "Letrozole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200161",
"LabelerName": "AvPAK",
"SubstanceName": "LETROZOLE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aromatase Inhibitor [EPC], Aromatase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191002",
"SamplePackage": "N",
"IndicationAndUsage": "Letrozole tablets are an aromatase inhibitor indicated for: 1 Adjuvant treatment of postmenopausal women with hormone receptor positive early breast cancer ( 1.1) , 2 Extended adjuvant treatment of postmenopausal women with early breast cancer who have received prior standard adjuvant tamoxifen therapy ( 1.2) , 3 First and second-line treatment of postmenopausal women with hormone receptor positive or unknown advanced breast cancer ( 1.3) .",
"Description": "Letrozole tablets for oral administration contain 2.5 mg of letrozole, a nonsteroidal aromatase inhibitor (inhibitor of estrogen synthesis). It is chemically described as 4,4'-(1H-1,2,4-Triazol-1-ylmethylene)dibenzonitrile, and its structural formula is. Letrozole is a white to yellowish crystalline powder, practically odorless, freely soluble in dichloromethane, slightly soluble in ethanol, and practically insoluble in water. It has a molecular weight of 285.31, empirical formula C 17H 11N 5, and a melting range of 184°C to 185°C. Letrozole tablets are available as 2.5 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, ferric oxide (yellow), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "50419-344-48",
"PackageDescription": "8 BOTTLE in 1 PACKAGE (50419-344-48) / 500 mL in 1 BOTTLE",
"NDC11Code": "50419-0344-48",
"ProductNDC": "50419-344",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021425",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST (iopromide) Injection is a nonionic, water soluble x-ray contrast agent for intravascular administration. Each Multiple-Dose container is to be used as a Pharmacy Bulk Package for dispensing multiple single dose preparations utilizing a suitable transfer device. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl) –2,4,6–triiodo–5– [(methoxyacetyl)amino] –N-methyl–1,3-benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula:. ULTRAVIST Injection is a nonionic sterile, clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution of iopromide, containing 2.42 mg/mL tromethamine buffer and 0.1 mg/mL edetate calcium disodium stabilizer. ULTRAVIST Injection Pharmacy Bulk Package is available in two strengths:. 300 mg Iodine per mL provides 623.4 mg/mL iopromide. 370 mg Iodine per mL provides 768.86 mg/mL iopromide. During the manufacture of ULTRAVIST Injection, sodium hydroxide or hydrochloric acid may be added for pH adjustment. ULTRAVIST Injection has a pH of 7.4 (6.5–8) at 25± 2°C, is sterilized by autoclaving and contains no preservatives. The iodine concentrations (mg Iodine per mL) available have the following physicochemical properties:. *Osmolality was measured by vapor-pressure osmometry. Osmolarity was calculated from the measured osmolal concentrations. Solutions of ULTRAVIST Injection 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "51079-285-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-285-20) / 1 TABLET in 1 BLISTER PACK (51079-285-01) ",
"NDC11Code": "51079-0285-20",
"ProductNDC": "51079-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19971104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070325",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971104",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "64743-285-01",
"PackageDescription": "5000 mL in 1 CANISTER (64743-285-01) ",
"NDC11Code": "64743-0285-01",
"ProductNDC": "64743-285",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Plantago Major",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20220404",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Herbamed AG",
"SubstanceName": "PLANTAGO MAJOR",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/mL",
"Status": "Unfinished",
"LastUpdate": "2025-01-29",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-APR-22"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>30142-285-22</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (30142-285-22) > 120 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>30142-0285-22</NDC11Code>
<ProductNDC>30142-285</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naproxen Sodium</ProprietaryName>
<NonProprietaryName>Naproxen Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021920</ApplicationNumber>
<LabelerName>KROGER COMPANY</LabelerName>
<SubstanceName>NAPROXEN SODIUM</SubstanceName>
<StrengthNumber>220</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-285-78</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (30142-285-78) > 80 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>30142-0285-78</NDC11Code>
<ProductNDC>30142-285</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naproxen Sodium</ProprietaryName>
<NonProprietaryName>Naproxen Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021920</ApplicationNumber>
<LabelerName>KROGER COMPANY</LabelerName>
<SubstanceName>NAPROXEN SODIUM</SubstanceName>
<StrengthNumber>220</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13668-285-22</NDCCode>
<PackageDescription>8 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (13668-285-22) </PackageDescription>
<NDC11Code>13668-0285-22</NDC11Code>
<ProductNDC>13668-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbamazepine</ProprietaryName>
<NonProprietaryName>Carbamazepine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212524</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>CARBAMAZEPINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbamazepine is indicated for use as an anticonvulsant drug. Evidence supporting efficacy of carbamazepine as an anticonvulsant was derived from active drug-controlled studies that enrolled patients with the following seizure types: 1 Partial seizures with complex symptomatology (psychomotor, temporal lobe). Patients with these seizures appear to show greater improvement than those with other types., 2 Generalized tonic-clonic seizures (grand mal)., 3 Mixed seizure patterns which include the above, or other partial or generalized seizures. Absence seizures (petit mal) do not appear to be controlled by carbamazepine (see PRECAUTIONS, General).</IndicationAndUsage>
<Description>Carbamazepine USP, is an anticonvulsant and specific analgesic for trigeminal neuralgia, available for oral administration as extended-release tablets of 100, 200, and 400 mg. Its chemical name is 5H-dibenz[b,f ]azepine-5-carboxamide, and its structural formula is. Carbamazepine USP is a white to off-white powder, practically insoluble in water and soluble in alcohol and in acetone. Its molecular weight is 236.27 g/mol. Inactive Ingredients Tablets: Cellulose acetate (CA-320S), cellulose acetate (CA-398-10), dextrates (milled), ferric oxide red (200 mg and 400 tablets only), ferric oxide yellow (100 mg and 400 mg tablets only), hydroxyethyl cellulose (natrosol 250 HX), hydroxyethyl cellulose (natrosol 250L), hypromellose E 15 LV, hypromellose-3 cps, magnesium stearate, mannitol 25, polyethylene glycol 8000, sodium lauryl sulfate, titanium dioxide (200 mg tablets only). The imprinting ink contains ferrosoferric oxide, propylene glycol and shellac. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>41250-285-22</NDCCode>
<PackageDescription>120 CAPSULE, LIQUID FILLED in 1 BOTTLE (41250-285-22) </PackageDescription>
<NDC11Code>41250-0285-22</NDC11Code>
<ProductNDC>41250-285</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen Pm</ProprietaryName>
<NonProprietaryName>Ibuprofen, Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090397</ApplicationNumber>
<LabelerName>MEIJER DISTRIBUTION INC.</LabelerName>
<SubstanceName>IBUPROFEN; DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■ for relief of occasional sleeplessness when associated with minor aches and pains. ■ helps you fall asleep and stay asleep.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>61786-285-22</NDCCode>
<PackageDescription>2.5 mL in 1 VIAL (61786-285-22) </PackageDescription>
<NDC11Code>61786-0285-22</NDC11Code>
<ProductNDC>61786-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20171218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075693</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68001-285-40</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (68001-285-40) > 5 mL in 1 VIAL (68001-285-22)</PackageDescription>
<NDC11Code>68001-0285-40</NDC11Code>
<ProductNDC>68001-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200753</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC],Folic Acid [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-29</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>30142-061-22</NDCCode>
<PackageDescription>15 BLISTER PACK in 1 CARTON (30142-061-22) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0061-22</NDC11Code>
<ProductNDC>30142-061</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Fexofenadine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076447</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>30142-290-22</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (30142-290-22) > 12 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0290-22</NDC11Code>
<ProductNDC>30142-290</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190515</StartMarketingDate>
<EndMarketingDate>20230512</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190515</StartMarketingDatePackage>
<EndMarketingDatePackage>20230512</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>30142-390-22</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (30142-390-22) / 48 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>30142-0390-22</NDC11Code>
<ProductNDC>30142-390</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menstrual Complete</ProprietaryName>
<NonProprietaryName>Acetaminophen, Caffeine, Pyrilamine Maleate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190603</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>ACETAMINOPHEN; CAFFEINE; PYRILAMINE MALEATE</SubstanceName>
<StrengthNumber>500; 60; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of these symptoms associated with menstrual periods: 1 bloating, 2 headache, 3 muscle aches, 4 cramps, 5 backache, 6 fatigue, 7 water-weight gain.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-571-22</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (30142-571-22) > 5 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0571-22</NDC11Code>
<ProductNDC>30142-571</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fexo Fenadine</ProprietaryName>
<NonProprietaryName>Fexofenadine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076447</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-18</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>30142-641-22</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (30142-641-22) / 24 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0641-22</NDC11Code>
<ProductNDC>30142-641</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sinus Decongestion</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210413</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-846-22</NDCCode>
<PackageDescription>15 BLISTER PACK in 1 CARTON (30142-846-22) / 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0846-22</NDC11Code>
<ProductNDC>30142-846</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Congestion Relief</ProprietaryName>
<NonProprietaryName>Loratadine, Pseudoephedrine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075989</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>LORATADINE; PSEUDOEPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>10; 240</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:. sneezing. itchy, watery eyes. runny nose. itching of the nose or throat. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-901-22</NDCCode>
<PackageDescription>56 g in 1 BOTTLE, PLASTIC (30142-901-22)</PackageDescription>
<NDC11Code>30142-0901-22</NDC11Code>
<ProductNDC>30142-901</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kroger Sport Sunscreen</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone Homosalate Octisalate Octocrylene Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121119</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>THE KROGER CO</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>2; 10; 5; 4; 5</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of activity in the water.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-902-22</NDCCode>
<PackageDescription>56 g in 1 BOTTLE, PLASTIC (30142-902-22)</PackageDescription>
<NDC11Code>30142-0902-22</NDC11Code>
<ProductNDC>30142-902</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kroger Sunscreen</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone Homosalate Octisalate Octocrylene Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121119</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>THE KROGER CO</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>2; 10; 5; 2; 2</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>helps prevent sunburn. higher SPF gives more sunburn protection. retains SPF after 80 minutes of activity in the water.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13533-800-12</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-12) > 10 mL in 1 VIAL, GLASS (13533-800-13) </PackageDescription>
<NDC11Code>13533-0800-12</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-800-15</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-15) > 25 mL in 1 VIAL, GLASS (13533-800-16) </PackageDescription>
<NDC11Code>13533-0800-15</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-800-20</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-20) > 50 mL in 1 VIAL, GLASS (13533-800-21) </PackageDescription>
<NDC11Code>13533-0800-20</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-800-24</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-24) > 200 mL in 1 VIAL, GLASS (13533-800-25) </PackageDescription>
<NDC11Code>13533-0800-24</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-800-40</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-40) > 400 mL in 1 VIAL, GLASS (13533-800-41) </PackageDescription>
<NDC11Code>13533-0800-40</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>13533-800-71</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-800-71) > 100 mL in 1 VIAL, GLASS (13533-800-72) </PackageDescription>
<NDC11Code>13533-0800-71</NDC11Code>
<ProductNDC>13533-800</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Gamunex-c</ProprietaryName>
<NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20101013</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125046</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GAMUNEX-C is an immune globulin injection (human) 10% liquid that is indicated for the treatment of.</IndicationAndUsage>
<Description>GAMUNEX-C is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMUNEX-C is clear to opalescent, and colorless to pale yellow. GAMUNEX-C consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMUNEX-C is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMUNEX-C contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMUNEX-C doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMUNEX-C. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMUNEX-C would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMUNEX-C is 4.0–4.5. GAMUNEX-C contains no preservative. GAMUNEX-C is not made with natural rubber latex. GAMUNEX-C is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMUNEX-C is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMUNEX-C manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10). These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>17156-023-05</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (17156-023-05) * 5 VIAL in 1 TRAY / 1 mL in 1 VIAL * 5 VIAL in 1 TRAY / 4.5 mL in 1 VIAL * 5 VIAL in 1 TRAY (17156-022-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>17156-0023-05</NDC11Code>
<ProductNDC>17156-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceretec</ProprietaryName>
<NonProprietaryName>Exametazime</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19881230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019829</ApplicationNumber>
<LabelerName>Medi-Physics Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-02-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19881230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Technetium Tc99m exametazime scintigraphy (with or without methylene blue stabilization) may be useful as an adjunct in the detection of altered regional cerebral perfusion in stroke. Tc99m exametazime without methylene blue stabilization is indicated for leukocyte labeled scintigraphy as an adjunct in the localization of intra-abdominal infection and inflammatory bowel disease.</IndicationAndUsage>
<Description>The Ceretec kit is supplied as five packs of three vials for use in the preparation of a technetium Tc99m exametazime intravenous injection as a diagnostic radiopharmaceutical for use as an adjunct in the detection of altered regional cerebral perfusion and for the radiolabeling of autologous leukocytes. Each vial of Ceretec contains a pre-dispensed sterile, non-pyrogenic, lyophilized mixture of 0.5 mg exametazime [(RR,SS)-4.8-diaza-3,6,6,9-tetramethylundecane-2, 10-dione bisoxime], 7.6 µg stannous chloride dihydrate (minimum stannous tin 0.6 µg; maximum total stannous and stannic tin 4.0 µg per vial) and 4.5 mg sodium chloride, sealed under nitrogen atmosphere with a rubber closure. The product contains no antimicrobial preservative. In addition, each package contains five 1 mL vials of Methylene Blue Injection USP 1% containing 10 mg methylene blue USP in Water for Injection q.s. pH adjusted with sodium hydroxide and/or hydrochloric acid, when necessary. Methylene Blue Injection USP is a sterile, non-pyrogenic solution of phenothiazin-5-ium,3,7-bis (dimethylamino)-chloride, trihydrate. Each package also contains five 4.5 mL vials of 0.003 M Monobasic Sodium Phosphate USP and Dibasic Sodium Phosphate USP in 0.9% Sodium Chloride Injection USP. The solution is sterile and non-pyrogenic. Each mL contains 0.276 mg monobasic sodium phosphate monohydrate (equivalent to 0.312 mg monobasic sodium phosphate dihydrate), 0.142 mg dibasic sodium phosphate anhydrous (equivalent to 0.178 mg dibasic sodium phosphate dihydrate) and 9 mg sodium chloride in Water for Injection q.s. The total calculated osmolarity of the 0.003 M Monobasic Sodium Phosphate USP and Dibasic Sodium Phosphate USP in 0.9% Sodium Chloride Injection USP is 317 mOsmol/L. Each mL provides 0.285 mg (3mM) of phosphate, 0.157 mEq of sodium and 0.154 mEq of chloride. When used according to the preparation instructions (see DOSAGE AND ADMINISTRATION), Methylene Blue Sodium Phosphates/Sodium Chloride mixture acts as a stabilizer. Prior to publication of the USAN, exametazime was formerly known as hexamethylpropylene amine oxime (HM-PAO). The name HM-PAO appears in many publications. The structural formula of exametazime is. When sterile pyrogen-free sodium pertechnetate Tc99m in isotonic saline is added to the vial of Ceretec, a Tc99m complex of exametazime is formed. Administration is by intravenous injection for diagnostic use.</Description>
</NDC>
<NDC>
<NDCCode>24470-941-10</NDCCode>
<PackageDescription>285 g in 1 BOTTLE, PLASTIC (24470-941-10) </PackageDescription>
<NDC11Code>24470-0941-10</NDC11Code>
<ProductNDC>24470-941</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Plexion</ProprietaryName>
<NonProprietaryName>Sulfacetamide Sodium, Sulfur</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Cintex Services, LLC</LabelerName>
<SubstanceName>SULFACETAMIDE SODIUM; SULFUR</SubstanceName>
<StrengthNumber>98; 48</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Sulfonamide Antibacterial [EPC], Sulfonamides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.</IndicationAndUsage>
<Description>Each gram contains 98 mg of sodium sulfacetamide and 48 mg of colloidal sulfur in a vehicle consisting of: benzyl alcohol, cetyl alcohol, fragrance, glyceryl stearate (and) PEG-100 stearate, magnesium aluminum silicate, phenoxyethanol, propylene glycol, purified water, sodium lauryl sulfate, sodium lithium magnesium silicate, sodium thiosulfate, stearyl alcohol and xanthan gum. Sodium sulfacetamide is a sulfonamide with antibacterial activity while sulfur acts as a keratolytic agent. Sodium sulfacetamide is C 8H 9N 2NaO 3S·H 2O with molecular weight of 254.24. Chemically, sodium sulfacetamide is N-[(4-aminophenyl) sulfonyl]-acetamide, monosodium salt, monohydrate. The structural formula is:. Sodium sulfacetamide is an odorless, white, crystalline powder with a bitter taste. It is freely soluble in water, sparingly soluble in alcohol, while practically insoluble in benzene, in chloroform and in ether.</Description>
</NDC>
<NDC>
<NDCCode>24470-948-10</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (24470-948-10) / 10 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>24470-0948-10</NDC11Code>
<ProductNDC>24470-948</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Salicylic Acid</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Cintex Services, LLC</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>285</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for the topical treatment and removal of common warts and plantar warts.</IndicationAndUsage>
<Description>Each mL contains 285 mg of salicylic acid extended release in a film-forming virucidal solution consisting of acrylates copolymer, isopropyl alcohol, n-Butyl acetate, polyvinyl butyral, and trimethyl pentanyl diisobutyrate. The pharmacologic activity of this product is generally attributed to the keratolytic activity of salicylic acid, which is incorporated into a polyacrylic, film-forming virucidal solution designed to cover the wart without the need for a bandage. The structural formula of salicylic acid is.</Description>
</NDC>
<NDC>
<NDCCode>24470-955-10</NDCCode>
<PackageDescription>285 g in 1 BOTTLE, PLASTIC (24470-955-10) </PackageDescription>
<NDC11Code>24470-0955-10</NDC11Code>
<ProductNDC>24470-955</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Sulfacetamide 9.8% And Sulfur 4.8% Cleanser</ProprietaryName>
<NonProprietaryName>Sulfacetamide Sodium, Sulfur</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Cintex Services, LLC</LabelerName>
<SubstanceName>SULFUR; SULFACETAMIDE SODIUM</SubstanceName>
<StrengthNumber>48; 98</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Sulfonamide Antibacterial [EPC], Sulfonamides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This product is indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.</IndicationAndUsage>
<Description>Each gram contains 98 mg of sodium sulfacetamide and 48 mg of colloidal sulfur in a vehicle consisting of: benzyl alcohol, cetyl alcohol, fragrance, glyceryl stearate (and) PEG-100 stearate, magnesium aluminum silicate, phenoxyethanol, propylene glycol, purified water, sodium lauryl sulfate, sodium lithium magnesium silicate, sodium thiosulfate, stearyl alcohol and xanthan gum. Sodium sulfacetamide is a sulfonamide with antibacterial activity while sulfur acts as a keratolytic agent. Sodium sulfacetamide is C 8H 9N 2NaO 3S·H 2O with molecular weight of 254.24. Chemically, sodium sulfacetamide is N-[(4-aminophenyl) sulfonyl]-acetamide, monosodium salt, monohydrate. The structural formula is:. Sodium sulfacetamide is an odorless, white, crystalline powder with a bitter taste. It is freely soluble in water, sparingly soluble in alcohol, while practically insoluble in benzene, in chloroform and in ether.</Description>
</NDC>
<NDC>
<NDCCode>42794-016-22</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (42794-016-22) </PackageDescription>
<NDC11Code>42794-0016-22</NDC11Code>
<ProductNDC>42794-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asenapine</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20201214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206107</ApplicationNumber>
<LabelerName>Sigmapharm Laboratories, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Asenapine sublingual tablet(s) is indicated for: 1 Bipolar I disorder [see Clinical Studies ( 14.2)] Adjunctive treatment to lithium or valproate in adults.</IndicationAndUsage>
<Description>Asenapine sublingual tablet(s) contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3a RS,12b RS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1 Hdibenzo[2,3:6,7]oxepino[4,5- c]pyrrole (2 Z)-2-butenedioate (1:1). Its molecular formula is C 17H 16ClNO⋅C 4H 4O 4and its molecular weight is 401.84 (free base: 285.8). The chemical structure is:. Asenapine maleate is a white to off-white powder. Asenapine sublingual tablet(s), black cherry flavor, is supplied for sublingual administration in tablets containing 5 mg or 10 mg asenapine; inactive ingredients include copovidone, crospovidone, polyoxyl 35 castor oil, mannitol, magnesium stearate, citric acid, butylated hydroxytoluene, silicon dioxide, sodium bicarbonate and black cherry flavor. Black cherry flavor contains maltodextrin, artificial flavors, propylene glycol, triethyl citrate, and caramel color.</Description>
</NDC>
<NDC>
<NDCCode>42794-017-22</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (42794-017-22) </PackageDescription>
<NDC11Code>42794-0017-22</NDC11Code>
<ProductNDC>42794-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asenapine</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20201214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206107</ApplicationNumber>
<LabelerName>Sigmapharm Laboratories, LLC</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Asenapine sublingual tablet(s) is indicated for: 1 Bipolar I disorder [see Clinical Studies ( 14.2)] Adjunctive treatment to lithium or valproate in adults.</IndicationAndUsage>
<Description>Asenapine sublingual tablet(s) contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3a RS,12b RS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1 Hdibenzo[2,3:6,7]oxepino[4,5- c]pyrrole (2 Z)-2-butenedioate (1:1). Its molecular formula is C 17H 16ClNO⋅C 4H 4O 4and its molecular weight is 401.84 (free base: 285.8). The chemical structure is:. Asenapine maleate is a white to off-white powder. Asenapine sublingual tablet(s), black cherry flavor, is supplied for sublingual administration in tablets containing 5 mg or 10 mg asenapine; inactive ingredients include copovidone, crospovidone, polyoxyl 35 castor oil, mannitol, magnesium stearate, citric acid, butylated hydroxytoluene, silicon dioxide, sodium bicarbonate and black cherry flavor. Black cherry flavor contains maltodextrin, artificial flavors, propylene glycol, triethyl citrate, and caramel color.</Description>
</NDC>
<NDC>
<NDCCode>50268-476-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX (50268-476-15) / 1 TABLET in 1 BLISTER PACK (50268-476-11) </PackageDescription>
<NDC11Code>50268-0476-15</NDC11Code>
<ProductNDC>50268-476</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Letrozole</ProprietaryName>
<NonProprietaryName>Letrozole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200161</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>LETROZOLE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aromatase Inhibitor [EPC], Aromatase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Letrozole tablets are an aromatase inhibitor indicated for: 1 Adjuvant treatment of postmenopausal women with hormone receptor positive early breast cancer ( 1.1) , 2 Extended adjuvant treatment of postmenopausal women with early breast cancer who have received prior standard adjuvant tamoxifen therapy ( 1.2) , 3 First and second-line treatment of postmenopausal women with hormone receptor positive or unknown advanced breast cancer ( 1.3) .</IndicationAndUsage>
<Description>Letrozole tablets for oral administration contain 2.5 mg of letrozole, a nonsteroidal aromatase inhibitor (inhibitor of estrogen synthesis). It is chemically described as 4,4'-(1H-1,2,4-Triazol-1-ylmethylene)dibenzonitrile, and its structural formula is. Letrozole is a white to yellowish crystalline powder, practically odorless, freely soluble in dichloromethane, slightly soluble in ethanol, and practically insoluble in water. It has a molecular weight of 285.31, empirical formula C 17H 11N 5, and a melting range of 184°C to 185°C. Letrozole tablets are available as 2.5 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, ferric oxide (yellow), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50419-344-48</NDCCode>
<PackageDescription>8 BOTTLE in 1 PACKAGE (50419-344-48) / 500 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>50419-0344-48</NDC11Code>
<ProductNDC>50419-344</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021425</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST (iopromide) Injection is a nonionic, water soluble x-ray contrast agent for intravascular administration. Each Multiple-Dose container is to be used as a Pharmacy Bulk Package for dispensing multiple single dose preparations utilizing a suitable transfer device. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl) –2,4,6–triiodo–5– [(methoxyacetyl)amino] –N-methyl–1,3-benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula:. ULTRAVIST Injection is a nonionic sterile, clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution of iopromide, containing 2.42 mg/mL tromethamine buffer and 0.1 mg/mL edetate calcium disodium stabilizer. ULTRAVIST Injection Pharmacy Bulk Package is available in two strengths:. 300 mg Iodine per mL provides 623.4 mg/mL iopromide. 370 mg Iodine per mL provides 768.86 mg/mL iopromide. During the manufacture of ULTRAVIST Injection, sodium hydroxide or hydrochloric acid may be added for pH adjustment. ULTRAVIST Injection has a pH of 7.4 (6.5–8) at 25± 2°C, is sterilized by autoclaving and contains no preservatives. The iodine concentrations (mg Iodine per mL) available have the following physicochemical properties:. *Osmolality was measured by vapor-pressure osmometry. Osmolarity was calculated from the measured osmolal concentrations. Solutions of ULTRAVIST Injection 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>51079-285-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-285-20) / 1 TABLET in 1 BLISTER PACK (51079-285-01) </PackageDescription>
<NDC11Code>51079-0285-20</NDC11Code>
<ProductNDC>51079-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19971104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070325</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>64743-285-01</NDCCode>
<PackageDescription>5000 mL in 1 CANISTER (64743-285-01) </PackageDescription>
<NDC11Code>64743-0285-01</NDC11Code>
<ProductNDC>64743-285</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Plantago Major</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20220404</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Herbamed AG</LabelerName>
<SubstanceName>PLANTAGO MAJOR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-01-29</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-APR-22</StartMarketingDatePackage>
</NDC>
</NDCList>