{
"NDC": [
{
"NDCCode": "31722-067-25",
"PackageDescription": "250 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-25) ",
"NDC11Code": "31722-0067-25",
"ProductNDC": "31722-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216800",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-067-01",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-01) ",
"NDC11Code": "31722-0067-01",
"ProductNDC": "31722-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216800",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-067-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-05) ",
"NDC11Code": "31722-0067-05",
"ProductNDC": "31722-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216800",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-067-60",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-60) ",
"NDC11Code": "31722-0067-60",
"ProductNDC": "31722-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216800",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-067-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-90) ",
"NDC11Code": "31722-0067-90",
"ProductNDC": "31722-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216800",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230531",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "30142-067-56",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (30142-067-56) > 25 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "30142-0067-56",
"ProductNDC": "30142-067",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Womens Laxative",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130401",
"EndMarketingDate": "20220620",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Kroger Company",
"SubstanceName": "BISACODYL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130401",
"EndMarketingDatePackage": "20220620",
"SamplePackage": "N"
},
{
"NDCCode": "43744-067-25",
"PackageDescription": "25 g in 1 DRUM (43744-067-25)",
"NDC11Code": "43744-0067-25",
"ProductNDC": "43744-067",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120103",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "62331-067-31",
"PackageDescription": "25 kg in 1 DRUM (62331-067-31) ",
"NDC11Code": "62331-0067-31",
"ProductNDC": "62331-067",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Foslevodopa",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Divi's Laboratories Limited",
"SubstanceName": "FOSLEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-08-10",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "24-JUN-25"
},
{
"NDCCode": "70069-067-25",
"PackageDescription": "25 VIAL in 1 CARTON (70069-067-25) / 20 mL in 1 VIAL (70069-067-01) ",
"NDC11Code": "70069-0067-25",
"ProductNDC": "70069-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180615",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "71052-067-25",
"PackageDescription": "250 g in 1 CONTAINER (71052-067-25) ",
"NDC11Code": "71052-0067-25",
"ProductNDC": "71052-067",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sildenafil Citrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "5000",
"StrengthUnit": "g/5000g",
"Status": "Unfinished",
"LastUpdate": "2025-04-15",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "02-JUL-19"
},
{
"NDCCode": "73569-067-04",
"PackageDescription": "25 g in 1 BOTTLE (73569-067-04) ",
"NDC11Code": "73569-0067-04",
"ProductNDC": "73569-067",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Bremelanotide Acetate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20241231",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Zhejiang Peptites Biotech",
"SubstanceName": "BREMELANOTIDE ACETATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "31-DEC-24"
},
{
"NDCCode": "83872-067-01",
"PackageDescription": "25 g in 1 BOTTLE (83872-067-01) ",
"NDC11Code": "83872-0067-01",
"ProductNDC": "83872-067",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bulubiueye Reamcaffeine",
"NonProprietaryName": "Eyecream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Shenzhen XiaoMai Manufacturing Co., Ltd.",
"SubstanceName": "CAFFEINE; HYALURONIC ACID; NIACINAMIDE; ROSA CANINA FRUIT OIL",
"StrengthNumber": "100; 250; 300; 200",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240329",
"SamplePackage": "N",
"IndicationAndUsage": "Suitable for dryness around the eyes, fine lines and wrinkles, dark circles and puffiness, and swelling around the eyes."
},
{
"NDCCode": "31722-116-31",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (31722-116-31) / 20 mL in 1 VIAL, MULTI-DOSE (31722-116-20) ",
"NDC11Code": "31722-0116-31",
"ProductNDC": "31722-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "31722-116-33",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (31722-116-33) / 50 mL in 1 VIAL, MULTI-DOSE (31722-116-50) ",
"NDC11Code": "31722-0116-33",
"ProductNDC": "31722-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "31722-117-31",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-31) / 2 mL in 1 VIAL, SINGLE-DOSE (31722-117-02) ",
"NDC11Code": "31722-0117-31",
"ProductNDC": "31722-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-117-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-117-05) ",
"NDC11Code": "31722-0117-32",
"ProductNDC": "31722-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-117-33",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-33) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-117-30) ",
"NDC11Code": "31722-0117-33",
"ProductNDC": "31722-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231205",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-118-31",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-31) / 2 mL in 1 VIAL, SINGLE-DOSE (31722-118-02) ",
"NDC11Code": "31722-0118-31",
"ProductNDC": "31722-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-118-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-118-05) ",
"NDC11Code": "31722-0118-32",
"ProductNDC": "31722-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-204-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-204-32) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (31722-204-31) ",
"NDC11Code": "31722-0204-32",
"ProductNDC": "31722-204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213778",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220518",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for injection is indicated for treatment of: gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults. pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults. Limitations of Use The safety and effectiveness of pantoprazole sodium for injection for the treatment of upper gastrointestinal bleeding have not been established in adult or pediatric patients. Pediatric use information is approved for Pfizer Inc.'s PROTONIX ®I.V. (pantoprazole sodium) for Injection. However, due to Pfizer Inc.'s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, in methanol, in dehydrated alcohol, very slightly soluble in phosphate buffer at pH 7.4, practically insoluble in hexane and in dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 42.3 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
},
{
"NDCCode": "31722-210-32",
"PackageDescription": "25 VIAL in 1 CARTON (31722-210-32) > 10 mL in 1 VIAL (31722-210-33) ",
"NDC11Code": "31722-0210-32",
"ProductNDC": "31722-210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216591",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220706",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin hydrochloride for injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is a white to tan lyophilized cake or powder, for preparing intravenous infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE.Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3 R*, 6S* (S*), 7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-l-lyxo hexopyranosyl)-β-d-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:. C 66H 75Cl 2N 9O 24 HCl M.W. 1485.71."
},
{
"NDCCode": "31722-217-31",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (31722-217-31) / 20 mL in 1 VIAL, MULTI-DOSE (31722-217-20) ",
"NDC11Code": "31722-0217-31",
"ProductNDC": "31722-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "31722-217-32",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (31722-217-32) / 50 mL in 1 VIAL, MULTI-DOSE (31722-217-50) ",
"NDC11Code": "31722-0217-32",
"ProductNDC": "31722-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "31722-275-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-275-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-275-10) ",
"NDC11Code": "31722-0275-32",
"ProductNDC": "31722-275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-275-34",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-275-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-275-30) ",
"NDC11Code": "31722-0275-34",
"ProductNDC": "31722-275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-276-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-276-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-276-10) ",
"NDC11Code": "31722-0276-32",
"ProductNDC": "31722-276",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-276-34",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-276-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-276-30) ",
"NDC11Code": "31722-0276-34",
"ProductNDC": "31722-276",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-277-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) ",
"NDC11Code": "31722-0277-32",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-277-34",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) ",
"NDC11Code": "31722-0277-34",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-301-32",
"PackageDescription": "1 CARTON in 1 KIT (31722-301-32) / 30 PACKET in 1 CARTON (31722-301-31) / 1 POWDER, FOR SUSPENSION in 1 PACKET (31722-301-25) ",
"NDC11Code": "31722-0301-32",
"ProductNDC": "31722-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag",
"NonProprietaryName": "Eltrombopag Olamine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20250513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216620",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250513",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag for oral suspension is a thrombopoietin receptor agonist indicated: for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag for oral suspension should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. ( 1.1) for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag for oral suspension should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. ( 1.2) for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. ( 1.3) Limitations of Use: Eltrombopag for oral suspension is not indicated for the treatment of patients with myelodysplastic syndrome (MDS). ( 1.4) Safety and efficacy have not been established in combination with direct-acting antiviral agents used without interferon for treatment of chronic hepatitis C infection. ( 1.4).",
"Description": "Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3’-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2’-hydroxy-3-biphenylcarboxylic acid, aminoethanol (1:2). It has the molecular formula C 25H 22N 4O 4.C 4H 14N 2O 2. The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.5 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula:. Eltrombopag olamine is practically insoluble in aqueous buffer across a pH range of 1 to 8.3, and very slightly soluble in methanol and dimethylformamide. Eltrombopag for oral suspension packets contain a reddish-brown to yellow powder which produces a reddish-brown suspension when reconstituted with water. Each packet contains eltrombopag olamine equivalent to 12.5 mg or 25 mg of eltrombopag free acid. The inactive ingredients of eltrombopag for oral suspension are mannitol, sucralose, and xanthan gum."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>31722-067-25</NDCCode>
<PackageDescription>250 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-25) </PackageDescription>
<NDC11Code>31722-0067-25</NDC11Code>
<ProductNDC>31722-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216800</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-067-01</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-01) </PackageDescription>
<NDC11Code>31722-0067-01</NDC11Code>
<ProductNDC>31722-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216800</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-067-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-05) </PackageDescription>
<NDC11Code>31722-0067-05</NDC11Code>
<ProductNDC>31722-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216800</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-067-60</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-60) </PackageDescription>
<NDC11Code>31722-0067-60</NDC11Code>
<ProductNDC>31722-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216800</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-067-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (31722-067-90) </PackageDescription>
<NDC11Code>31722-0067-90</NDC11Code>
<ProductNDC>31722-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216800</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, USP is an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.20. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride is white powder, and soluble in water, 0.1 N Hydrochloric acid and in alcohol. The structural formula is:. Bupropion hydrochloride extended-release tablets USP (SR) are supplied for oral administration as 100 mg (red), 150 mg (green), and 200 mg (yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, diluted hydrochloride acid, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium stearyl fumarate, titanium dioxide and is printed with edible black ink. In addition, the 100 mg tablet contains FD&C Red #40, the 150 mg tablet contains FD&C Blue #1 and D&C Yellow #10 Lake and the 200 mg tablet contains D&C Yellow #10 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>30142-067-56</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (30142-067-56) > 25 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0067-56</NDC11Code>
<ProductNDC>30142-067</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Womens Laxative</ProprietaryName>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130401</StartMarketingDate>
<EndMarketingDate>20220620</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130401</StartMarketingDatePackage>
<EndMarketingDatePackage>20220620</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43744-067-25</NDCCode>
<PackageDescription>25 g in 1 DRUM (43744-067-25)</PackageDescription>
<NDC11Code>43744-0067-25</NDC11Code>
<ProductNDC>43744-067</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120103</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62331-067-31</NDCCode>
<PackageDescription>25 kg in 1 DRUM (62331-067-31) </PackageDescription>
<NDC11Code>62331-0067-31</NDC11Code>
<ProductNDC>62331-067</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Foslevodopa</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250624</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Divi's Laboratories Limited</LabelerName>
<SubstanceName>FOSLEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-10</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>24-JUN-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70069-067-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70069-067-25) / 20 mL in 1 VIAL (70069-067-01) </PackageDescription>
<NDC11Code>70069-0067-25</NDC11Code>
<ProductNDC>70069-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>71052-067-25</NDCCode>
<PackageDescription>250 g in 1 CONTAINER (71052-067-25) </PackageDescription>
<NDC11Code>71052-0067-25</NDC11Code>
<ProductNDC>71052-067</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sildenafil Citrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>g/5000g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-04-15</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>02-JUL-19</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>73569-067-04</NDCCode>
<PackageDescription>25 g in 1 BOTTLE (73569-067-04) </PackageDescription>
<NDC11Code>73569-0067-04</NDC11Code>
<ProductNDC>73569-067</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Bremelanotide Acetate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20241231</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Zhejiang Peptites Biotech</LabelerName>
<SubstanceName>BREMELANOTIDE ACETATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>31-DEC-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>83872-067-01</NDCCode>
<PackageDescription>25 g in 1 BOTTLE (83872-067-01) </PackageDescription>
<NDC11Code>83872-0067-01</NDC11Code>
<ProductNDC>83872-067</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bulubiueye Reamcaffeine</ProprietaryName>
<NonProprietaryName>Eyecream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Shenzhen XiaoMai Manufacturing Co., Ltd.</LabelerName>
<SubstanceName>CAFFEINE; HYALURONIC ACID; NIACINAMIDE; ROSA CANINA FRUIT OIL</SubstanceName>
<StrengthNumber>100; 250; 300; 200</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Suitable for dryness around the eyes, fine lines and wrinkles, dark circles and puffiness, and swelling around the eyes.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-116-31</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (31722-116-31) / 20 mL in 1 VIAL, MULTI-DOSE (31722-116-20) </PackageDescription>
<NDC11Code>31722-0116-31</NDC11Code>
<ProductNDC>31722-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-116-33</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (31722-116-33) / 50 mL in 1 VIAL, MULTI-DOSE (31722-116-50) </PackageDescription>
<NDC11Code>31722-0116-33</NDC11Code>
<ProductNDC>31722-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-117-31</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-31) / 2 mL in 1 VIAL, SINGLE-DOSE (31722-117-02) </PackageDescription>
<NDC11Code>31722-0117-31</NDC11Code>
<ProductNDC>31722-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-117-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-117-05) </PackageDescription>
<NDC11Code>31722-0117-32</NDC11Code>
<ProductNDC>31722-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-117-33</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-33) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-117-30) </PackageDescription>
<NDC11Code>31722-0117-33</NDC11Code>
<ProductNDC>31722-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-118-31</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-31) / 2 mL in 1 VIAL, SINGLE-DOSE (31722-118-02) </PackageDescription>
<NDC11Code>31722-0118-31</NDC11Code>
<ProductNDC>31722-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-118-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-118-05) </PackageDescription>
<NDC11Code>31722-0118-32</NDC11Code>
<ProductNDC>31722-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-204-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-204-32) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (31722-204-31) </PackageDescription>
<NDC11Code>31722-0204-32</NDC11Code>
<ProductNDC>31722-204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213778</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of: gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults. pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults. Limitations of Use The safety and effectiveness of pantoprazole sodium for injection for the treatment of upper gastrointestinal bleeding have not been established in adult or pediatric patients. Pediatric use information is approved for Pfizer Inc.'s PROTONIX ®I.V. (pantoprazole sodium) for Injection. However, due to Pfizer Inc.'s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:. Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, in methanol, in dehydrated alcohol, very slightly soluble in phosphate buffer at pH 7.4, practically insoluble in hexane and in dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 42.3 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>31722-210-32</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (31722-210-32) > 10 mL in 1 VIAL (31722-210-33) </PackageDescription>
<NDC11Code>31722-0210-32</NDC11Code>
<ProductNDC>31722-210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216591</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin hydrochloride for injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is a white to tan lyophilized cake or powder, for preparing intravenous infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE.Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3 R*, 6S* (S*), 7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-l-lyxo hexopyranosyl)-β-d-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:. C 66H 75Cl 2N 9O 24 HCl M.W. 1485.71.</Description>
</NDC>
<NDC>
<NDCCode>31722-217-31</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (31722-217-31) / 20 mL in 1 VIAL, MULTI-DOSE (31722-217-20) </PackageDescription>
<NDC11Code>31722-0217-31</NDC11Code>
<ProductNDC>31722-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-217-32</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (31722-217-32) / 50 mL in 1 VIAL, MULTI-DOSE (31722-217-50) </PackageDescription>
<NDC11Code>31722-0217-32</NDC11Code>
<ProductNDC>31722-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-275-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-275-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-275-10) </PackageDescription>
<NDC11Code>31722-0275-32</NDC11Code>
<ProductNDC>31722-275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-275-34</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-275-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-275-30) </PackageDescription>
<NDC11Code>31722-0275-34</NDC11Code>
<ProductNDC>31722-275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-276-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-276-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-276-10) </PackageDescription>
<NDC11Code>31722-0276-32</NDC11Code>
<ProductNDC>31722-276</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-276-34</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-276-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-276-30) </PackageDescription>
<NDC11Code>31722-0276-34</NDC11Code>
<ProductNDC>31722-276</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-277-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) </PackageDescription>
<NDC11Code>31722-0277-32</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-277-34</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) </PackageDescription>
<NDC11Code>31722-0277-34</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-301-32</NDCCode>
<PackageDescription>1 CARTON in 1 KIT (31722-301-32) / 30 PACKET in 1 CARTON (31722-301-31) / 1 POWDER, FOR SUSPENSION in 1 PACKET (31722-301-25) </PackageDescription>
<NDC11Code>31722-0301-32</NDC11Code>
<ProductNDC>31722-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag</ProprietaryName>
<NonProprietaryName>Eltrombopag Olamine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216620</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag for oral suspension is a thrombopoietin receptor agonist indicated: for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag for oral suspension should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. ( 1.1) for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag for oral suspension should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. ( 1.2) for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. ( 1.3) Limitations of Use: Eltrombopag for oral suspension is not indicated for the treatment of patients with myelodysplastic syndrome (MDS). ( 1.4) Safety and efficacy have not been established in combination with direct-acting antiviral agents used without interferon for treatment of chronic hepatitis C infection. ( 1.4).</IndicationAndUsage>
<Description>Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3’-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2’-hydroxy-3-biphenylcarboxylic acid, aminoethanol (1:2). It has the molecular formula C 25H 22N 4O 4.C 4H 14N 2O 2. The molecular weight is 564.65 g/mol for eltrombopag olamine and 442.5 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula:. Eltrombopag olamine is practically insoluble in aqueous buffer across a pH range of 1 to 8.3, and very slightly soluble in methanol and dimethylformamide. Eltrombopag for oral suspension packets contain a reddish-brown to yellow powder which produces a reddish-brown suspension when reconstituted with water. Each packet contains eltrombopag olamine equivalent to 12.5 mg or 25 mg of eltrombopag free acid. The inactive ingredients of eltrombopag for oral suspension are mannitol, sucralose, and xanthan gum.</Description>
</NDC>
</NDCList>