RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>31722-204-32</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-204-32)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (31722-204-31) </PackageDescription>
    <NDC11Code>31722-0204-32</NDC11Code>
    <ProductNDC>31722-204</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213778</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of:  gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults.  pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults. Limitations of Use The safety and effectiveness of pantoprazole sodium for injection for the treatment of upper gastrointestinal bleeding have not been established in adult or pediatric patients. Pediatric use information is approved for Pfizer Inc.'s PROTONIX ®I.V. (pantoprazole sodium) for Injection. However, due to Pfizer Inc.'s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:.   Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, in methanol, in dehydrated alcohol, very slightly soluble in phosphate buffer at pH 7.4, practically insoluble in hexane and in dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5.  Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 42.3 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-204-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (31722-204-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (31722-204-31) </PackageDescription>
    <NDC11Code>31722-0204-10</NDC11Code>
    <ProductNDC>31722-204</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213778</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of:  gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults.  pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults. Limitations of Use The safety and effectiveness of pantoprazole sodium for injection for the treatment of upper gastrointestinal bleeding have not been established in adult or pediatric patients. Pediatric use information is approved for Pfizer Inc.'s PROTONIX ®I.V. (pantoprazole sodium) for Injection. However, due to Pfizer Inc.'s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S, with a molecular weight of 405.4. The structural formula is:.   Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, in methanol, in dehydrated alcohol, very slightly soluble in phosphate buffer at pH 7.4, practically insoluble in hexane and in dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5.  Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 42.3 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>62175-204-32</NDCCode>
    <PackageDescription>30 TABLET, CHEWABLE in 1 BOTTLE (62175-204-32) </PackageDescription>
    <NDC11Code>62175-0204-32</NDC11Code>
    <ProductNDC>62175-204</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Montelukast Sodium</ProprietaryName>
    <NonProprietaryName>Montelukast Sodium</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120803</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200405</ApplicationNumber>
    <LabelerName>Lannett Company, Inc.</LabelerName>
    <SubstanceName>MONTELUKAST SODIUM</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Leukotriene Receptor Antagonist [EPC], Leukotriene Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Montelukast sodium chewable tablets are a leukotriene receptor antagonist indicated for: 1 Prophylaxis and chronic treatment of asthma in patients 12 months of age and older (1.1)., 2 Acute prevention of exercise-induced bronchoconstriction (EIB) in patients 6 years of age and older (1.2)., 3 Relief of symptoms of allergic rhinitis (AR): seasonal allergic rhinitis (SAR) in patients 2 years of age and older, and perennial allergic rhinitis (PAR) in patients 6 months of age and older. Reserve use for patients who have an inadequate response or intolerance to alternative therapies (1.3).</IndicationAndUsage>
    <Description>Montelukast sodium, the active ingredient in Montelukast Sodium Chewable Tablets, is a selective and orally active leukotriene receptor antagonist that inhibits the cysteinyl leukotriene CysLT1 receptor. Montelukast sodium is described chemically as [R-(E)]-1-[[[1-[3-[2-(7-chloro-2-quinolinyl)ethenyl]phenyl]-3-[2-(1-hydroxy-1-methylethyl)phenyl]propyl]thio]methyl]cyclopropaneacetic acid, monosodium salt. The empirical formula is C35H35CINNaO3S, and its molecular weight is 608.18. The structural formula is:. Montelukast sodium is a hygroscopic, optically active, white to off-white powder. Montelukast sodium is freely soluble in ethanol, methanol, and water and practically insoluble in acetonitrile. Each 4-mg and 5-mg Montelukast Sodium Chewable Tablet contains 4.2 and 5.2 mg montelukast sodium, respectively, which are equivalent to 4 and 5 mg of montelukast, respectively. Both chewable tablets contain the following inactive ingredients: butylated hydroxyanisole, colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hydroxypropyl methylcellulose, mannitol, microcrystalline cellulose, natural and artificial orange flavor, red ferric oxide, sodium stearyl fumarate and sucralose.</Description>
  </NDC>
  <NDC>
    <NDCCode>67091-204-48</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (67091-204-48)  *  32 BLISTER PACK in 1 CARTON &gt; 1 CAPSULE in 1 BLISTER PACK *  16 BLISTER PACK in 1 CARTON &gt; 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67091-0204-48</NDC11Code>
    <ProductNDC>67091-204</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cold And Flu Relief</ProprietaryName>
    <ProprietaryNameSuffix>Multi Symptom</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hbr, Phenylephrine Hcl, Doxylamine Succinate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141231</StartMarketingDate>
    <EndMarketingDate>20201231</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>WinCo Foods, LLC</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20141231</StartMarketingDatePackage>
    <EndMarketingDatePackage>20201231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71513-204-32</NDCCode>
    <PackageDescription>5 mL in 1 BOTTLE (71513-204-32) </PackageDescription>
    <NDC11Code>71513-0204-32</NDC11Code>
    <ProductNDC>71513-204</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20210101</StartMarketingDate>
    <EndMarketingDate>20221031</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333E</ApplicationNumber>
    <LabelerName>Broder Bros Co.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>62</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20210101</StartMarketingDatePackage>
    <EndMarketingDatePackage>20221031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>31722-005-30</NDCCode>
    <PackageDescription>5 PACKAGE in 1 CARTON (31722-005-30)  / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) </PackageDescription>
    <NDC11Code>31722-0005-30</NDC11Code>
    <ProductNDC>31722-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mesalamine</ProprietaryName>
    <NonProprietaryName>Mesalamine</NonProprietaryName>
    <DosageFormName>SUPPOSITORY</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20200319</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213377</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>MESALAMINE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
    <Description>The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-005-31</NDCCode>
    <PackageDescription>7 PACKAGE in 1 CARTON (31722-005-31)  / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) </PackageDescription>
    <NDC11Code>31722-0005-31</NDC11Code>
    <ProductNDC>31722-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mesalamine</ProprietaryName>
    <NonProprietaryName>Mesalamine</NonProprietaryName>
    <DosageFormName>SUPPOSITORY</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20200319</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213377</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>MESALAMINE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
    <Description>The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-019-32</NDCCode>
    <PackageDescription>12 BOTTLE in 1 BOX (31722-019-32)  / 120 mL in 1 BOTTLE (31722-019-12) </PackageDescription>
    <NDC11Code>31722-0019-32</NDC11Code>
    <ProductNDC>31722-019</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diatrizoate Meglumine And Diatrizoate Sodium</ProprietaryName>
    <NonProprietaryName>Diatrizoate Meglumine And Diatrizoate Sodium</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL; RECTAL</RouteName>
    <StartMarketingDate>20231117</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215049</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DIATRIZOATE MEGLUMINE; DIATRIZOATE SODIUM</SubstanceName>
    <StrengthNumber>660; 100</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Radiographic Contrast Agent [EPC], Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA], X-Ray Contrast Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diatrizoate meglumine and diatrizoate sodium solution is indicated for radiographic examination of segments of the gastrointestinal tract (esophagus, stomach, proximal small intestine, and colon). The preparation is particularly indicated when a more viscous agent such as barium sulfate, which is not water-soluble, is not feasible or is potentially dangerous. Diatrizoate meglumine and diatrizoate sodium solution may also be used as an adjunct to contrast enhancement in computed tomography of the torso (body imaging); the preparation is indicated, in conjunction with intravenous administration of a radiopaque contrast agent, when unenhanced imaging may not provide sufficient definition in distinguishing normal loops of bowel from adjacent organs or areas of suspected pathology.</IndicationAndUsage>
    <Description>Diatrizoate Meglumine and Diatrizoate Sodium Solution, USP is a palatable strawberry-flavored water-soluble iodinated radiopaque contrast medium for oral or rectal administration only. Each mL contains 660 mg diatrizoate meglumine USP and 100 mg diatrizoate sodium USP; pH has been adjusted to 6.0 to 7.6 with sodium hydroxide. Each mL contains approximately 4.8 mg (0.21 mEq) sodiumand 367 mg organically bound iodine. Inactive ingredients: edetate disodium dihydrate, polysorbate 80, saccharin sodium, simethicone, sodium hydroxide, strawberry flavor and tri-sodium citrate dihydrate. Diatrizoate meglumine is designated chemically as 1-deoxy-1-(methylamino)-D-glucitol 3,5- diacetamido-2,4,6-triiodobenzoate (salt); diatrizoate sodium is monosodium 3,5-diacetamido-2,4,6-triiodobenzoate. Structural formulas:. Diatrizoate meglumine C 11H 9I 3N 2O 4.C 7H 17NO 5 Molecular Weight: 809.13 Organically bound Iodine: 47.1%. Diatrizoate sodium C 11H 8I 3N 2NaO 4 Molecular Weight: 635.90 Organically bound Iodine: 59.9%.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-027-31</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (31722-027-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-027-32) </PackageDescription>
    <NDC11Code>31722-0027-31</NDC11Code>
    <ProductNDC>31722-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solifenacin Succinate</ProprietaryName>
    <NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215761</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-08-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-028-31</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (31722-028-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-028-32) </PackageDescription>
    <NDC11Code>31722-0028-31</NDC11Code>
    <ProductNDC>31722-028</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solifenacin Succinate</ProprietaryName>
    <NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215761</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-08-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-029-32</NDCCode>
    <PackageDescription>30 PACKET in 1 CARTON (31722-029-32)  / 1 GRANULE in 1 PACKET</PackageDescription>
    <NDC11Code>31722-0029-32</NDC11Code>
    <ProductNDC>31722-029</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferasirox</ProprietaryName>
    <NonProprietaryName>Deferasirox</NonProprietaryName>
    <DosageFormName>GRANULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230316</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216229</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DEFERASIROX</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230316</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
    <Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula.   Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-030-32</NDCCode>
    <PackageDescription>30 PACKET in 1 CARTON (31722-030-32)  / 1 GRANULE in 1 PACKET</PackageDescription>
    <NDC11Code>31722-0030-32</NDC11Code>
    <ProductNDC>31722-030</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferasirox</ProprietaryName>
    <NonProprietaryName>Deferasirox</NonProprietaryName>
    <DosageFormName>GRANULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220922</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216229</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DEFERASIROX</SubstanceName>
    <StrengthNumber>180</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220922</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
    <Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula.   Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-031-32</NDCCode>
    <PackageDescription>30 PACKET in 1 CARTON (31722-031-32)  / 1 GRANULE in 1 PACKET</PackageDescription>
    <NDC11Code>31722-0031-32</NDC11Code>
    <ProductNDC>31722-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferasirox</ProprietaryName>
    <NonProprietaryName>Deferasirox</NonProprietaryName>
    <DosageFormName>GRANULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220922</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216229</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DEFERASIROX</SubstanceName>
    <StrengthNumber>360</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220922</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
    <Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula.   Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-032-32</NDCCode>
    <PackageDescription>30 PACKET in 1 CARTON (31722-032-32)  / 1 GRANULE, DELAYED RELEASE in 1 PACKET</PackageDescription>
    <NDC11Code>31722-0032-32</NDC11Code>
    <ProductNDC>31722-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>GRANULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231027</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216139</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231027</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for delayed-release oral suspension is indicated for:.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for delayed-release oral suspension, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S. 3/2 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium is supplied as a for delayed-release oral suspension in unit dose packets, available in one strength 40 mg pantoprazole, (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium for delayed-release oral suspension contains the following inactive ingredients: crospovidone, ferric oxide, hypromellose, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, polysorbate 80, sodium carbonate anhydrous, sodium lauryl sulfate, talc, titanium dioxide and triethyl citrate.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-046-32</NDCCode>
    <PackageDescription>9 POWDER, FOR SOLUTION in 1 CARTON (31722-046-32) </PackageDescription>
    <NDC11Code>31722-0046-32</NDC11Code>
    <ProductNDC>31722-046</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diclofenac Potassium</ProprietaryName>
    <NonProprietaryName>Diclofenac Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220304</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215375</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DICLOFENAC POTASSIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220304</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diclofenac potassium for oral solution is indicated for the acute treatment of migraine attacks with or without aura in adults (18 years of age or older). Limitations of Use:  Diclofenac potassium for oral solution is not indicated for the prophylactic therapy of migraine.  The safety and effectiveness of diclofenac potassium for oral solution have not been established for cluster headache, which is present in an older, predominantly male population.</IndicationAndUsage>
    <Description>Diclofenac potassium for oral solution is a nonsteroidal anti-inflammatory drug, available as a buffered soluble powder, designed to be mixed with water prior to oral administration. Diclofenac potassium for oral solution is a white to off-white, buffered, flavored powder for oral solution packaged in individual unit dose packets. The chemical name is potassium [o-(2,6-dichloroanilino) phenyl] acetate. The molecular weight is 334.24 g/mole. Its molecular formula is C 14H 10Cl 2NKO 2, and it has the following structure.     The inactive ingredients in diclofenac potassium for oral solution include: flavoring agent (peppermint), glyceryl behenate, mannitol, sucralose and tribasic sodium phosphate anhydrous.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-100-32</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (31722-100-32)  / 6 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>31722-0100-32</NDC11Code>
    <ProductNDC>31722-100</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nitazoxanide</ProprietaryName>
    <NonProprietaryName>Nitazoxanide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250415</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218701</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>NITAZOXANIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250415</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diarrhea caused by Giardia lambliaor Cryptosporidium parvum: Nitazoxanide tablets (patients 12 years and older) are indicated for the treatment of diarrhea caused by Giardia lambliaor Cryptosporidium parvum. Limitations of Use Nitazoxanide tablets have not been shown to be effective for the treatment of diarrhea caused by Cryptosporidium parvumin HIV-infected or immunodeficient patients [see Clinical Studies (14.2)] .</IndicationAndUsage>
    <Description>Nitazoxanide tablets contain the active ingredient, nitazoxanide, a synthetic antiprotozoal for oral administration. Nitazoxanide is off-white to yellow powder. It is practically insoluble in ethanol, water and soluble in N, N-dimethylacetamide. Chemically, nitazoxanide is 2-((5-Nitrothiazol-2-yl) carbamoyl) phenyl acetate. The molecular formula is C 12H 9N 3O 5S and the molecular weight is 307.28. The structural formula is:.   Nitazoxanide tablets contain 500 mg of nitazoxanide and the following inactive ingredients: corn starch, D&amp;C yellow #10 aluminum lake, FD&amp;C blue #2, FD&amp;C yellow #6, hypromellose, lecithin (soya), magnesium stearate, polyvinyl alcohol, pregelatinized starch, sodium starch glycolate, talc,  titanium dioxide and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-116-32</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (31722-116-32)  / 20 mL in 1 VIAL, MULTI-DOSE (31722-116-20) </PackageDescription>
    <NDC11Code>31722-0116-32</NDC11Code>
    <ProductNDC>31722-116</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20211108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214336</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks.  Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O  HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-117-32</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-32)  / 5 mL in 1 VIAL, SINGLE-DOSE (31722-117-05) </PackageDescription>
    <NDC11Code>31722-0117-32</NDC11Code>
    <ProductNDC>31722-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20211108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214339</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211108</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use.  Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-118-32</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-32)  / 5 mL in 1 VIAL, SINGLE-DOSE (31722-118-05) </PackageDescription>
    <NDC11Code>31722-0118-32</NDC11Code>
    <ProductNDC>31722-118</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20211108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214339</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211108</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use.  Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-151-32</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-151-32) </PackageDescription>
    <NDC11Code>31722-0151-32</NDC11Code>
    <ProductNDC>31722-151</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan</ProprietaryName>
    <NonProprietaryName>Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210623</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203311</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VALSARTAN</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for:  Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1)  Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2)  Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
    <Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-152-32</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-152-32) </PackageDescription>
    <NDC11Code>31722-0152-32</NDC11Code>
    <ProductNDC>31722-152</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan</ProprietaryName>
    <NonProprietaryName>Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210623</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203311</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VALSARTAN</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for:  Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1)  Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2)  Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
    <Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-153-32</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-153-32) </PackageDescription>
    <NDC11Code>31722-0153-32</NDC11Code>
    <ProductNDC>31722-153</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan</ProprietaryName>
    <NonProprietaryName>Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210623</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203311</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VALSARTAN</SubstanceName>
    <StrengthNumber>160</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for:  Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1)  Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2)  Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
    <Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-154-32</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-154-32) </PackageDescription>
    <NDC11Code>31722-0154-32</NDC11Code>
    <ProductNDC>31722-154</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan</ProprietaryName>
    <NonProprietaryName>Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210623</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203311</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VALSARTAN</SubstanceName>
    <StrengthNumber>320</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for:  Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1)  Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2)  Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
    <Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-168-32</NDCCode>
    <PackageDescription>105 CAPSULE, DELAYED RELEASE in 1 CARTON (31722-168-32) </PackageDescription>
    <NDC11Code>31722-0168-32</NDC11Code>
    <ProductNDC>31722-168</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duloxetine</ProprietaryName>
    <NonProprietaryName>Duloxetine</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204343</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of:  Major depressive disorder in adults  Generalized anxiety disorder in adults and pediatric patients 7 years of age and older  Diabetic peripheral neuropathic pain in adults  Fibromyalgia in adults and pediatric patients 13 years of age and older  Chronic musculoskeletal pain in adults.</IndicationAndUsage>
    <Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (γS)-N-Methyl-γ-(1-napthalenyloxy)-2-thiophenepropanamine hydrochloride. The empirical formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.87. The structural formula is:. Duloxetine hydrochloride, USP is an off-white to white colored crystalline powder which is freely soluble in methanol and sparingly soluble in water. Each capsule contains film-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. Inactive ingredients include crospovidone, FD &amp; C Blue 2, gelatin, hydroxy propyl methyl cellulose acetate succinate, hypromellose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. In addition, the 20 mg and 60 mg capsules also contain iron oxide yellow. The imprinting ink contains propylene glycol, shellac, and strong ammonia solution. The 20 mg capsule also contains black iron oxide and potassium hydroxide. The 30 mg capsule also contains yellow iron oxide. The 60 mg capsule also contains potassium hydroxide and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-169-32</NDCCode>
    <PackageDescription>105 CAPSULE, DELAYED RELEASE in 1 CARTON (31722-169-32) </PackageDescription>
    <NDC11Code>31722-0169-32</NDC11Code>
    <ProductNDC>31722-169</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duloxetine</ProprietaryName>
    <NonProprietaryName>Duloxetine</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204343</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of:  Major depressive disorder in adults  Generalized anxiety disorder in adults and pediatric patients 7 years of age and older  Diabetic peripheral neuropathic pain in adults  Fibromyalgia in adults and pediatric patients 13 years of age and older  Chronic musculoskeletal pain in adults.</IndicationAndUsage>
    <Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (γS)-N-Methyl-γ-(1-napthalenyloxy)-2-thiophenepropanamine hydrochloride. The empirical formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.87. The structural formula is:. Duloxetine hydrochloride, USP is an off-white to white colored crystalline powder which is freely soluble in methanol and sparingly soluble in water. Each capsule contains film-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. Inactive ingredients include crospovidone, FD &amp; C Blue 2, gelatin, hydroxy propyl methyl cellulose acetate succinate, hypromellose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. In addition, the 20 mg and 60 mg capsules also contain iron oxide yellow. The imprinting ink contains propylene glycol, shellac, and strong ammonia solution. The 20 mg capsule also contains black iron oxide and potassium hydroxide. The 30 mg capsule also contains yellow iron oxide. The 60 mg capsule also contains potassium hydroxide and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-170-32</NDCCode>
    <PackageDescription>105 CAPSULE, DELAYED RELEASE in 1 CARTON (31722-170-32) </PackageDescription>
    <NDC11Code>31722-0170-32</NDC11Code>
    <ProductNDC>31722-170</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duloxetine</ProprietaryName>
    <NonProprietaryName>Duloxetine</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204343</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of:  Major depressive disorder in adults  Generalized anxiety disorder in adults and pediatric patients 7 years of age and older  Diabetic peripheral neuropathic pain in adults  Fibromya lgia in adults  Chronic musculoskeletal pain in adults Additional pediatric use information is approved for Eli Lilly and Company, Inc.’s CYMBALTA (duloxetine) delayed-release capsules. However, due to Eli Lilly and Company Inc.’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
    <Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (γS)-N-Methyl-γ-(1-napthalenyloxy)-2-thiophenepropanamine hydrochloride. The empirical formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.87. The structural formula is:. Duloxetine hydrochloride, USP is an off-white to white colored crystalline powder which is freely soluble in methanol and sparingly soluble in water. Each capsule contains film-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. Inactive ingredients include crospovidone, FD &amp; C Blue 2, gelatin, hydroxy propyl methyl cellulose acetate succinate, hypromellose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. In addition, the 20 mg and 60 mg capsules also contain iron oxide yellow. The imprinting ink contains propylene glycol, shellac, and strong ammonia solution. The 20 mg capsule also contains black iron oxide and potassium hydroxide. The 30 mg capsule also contains yellow iron oxide. The 60 mg capsule also contains potassium hydroxide and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-203-33</NDCCode>
    <PackageDescription>10 VIAL, GLASS in 1 CARTON (31722-203-33)  / 20 mL in 1 VIAL, GLASS (31722-203-32) </PackageDescription>
    <NDC11Code>31722-0203-33</NDC11Code>
    <ProductNDC>31722-203</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lacosamide</ProprietaryName>
    <NonProprietaryName>Lacosamide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220914</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216335</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LACOSAMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220914</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lacosamide is indicated for:  Treatment of partial-onset seizures in patients 1 month of age and older ( 1.1).  Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older ( 1.2).</IndicationAndUsage>
    <Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:.   Lacosamide USP is a white to light yellow powder. It is freely soluble in methanol, soluble in anhydrous ethanol, sparingly soluble in water, slightly soluble in acetonitrile practically insoluble in heptane.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-210-32</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (31722-210-32)  &gt; 10 mL in 1 VIAL (31722-210-33) </PackageDescription>
    <NDC11Code>31722-0210-32</NDC11Code>
    <ProductNDC>31722-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216591</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin hydrochloride for injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP, is a white to tan lyophilized cake or powder, for preparing intravenous infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE.Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3 R*, 6S* (S*), 7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-l-lyxo hexopyranosyl)-β-d-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:. C 66H 75Cl 2N 9O 24 HCl                          M.W. 1485.71.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-217-32</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (31722-217-32)  / 50 mL in 1 VIAL, MULTI-DOSE (31722-217-50) </PackageDescription>
    <NDC11Code>31722-0217-32</NDC11Code>
    <ProductNDC>31722-217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20211108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214336</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks.  Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O  HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-275-32</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-275-32)  / 10 mL in 1 VIAL, SINGLE-DOSE (31722-275-10) </PackageDescription>
    <NDC11Code>31722-0275-32</NDC11Code>
    <ProductNDC>31722-275</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20240327</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217821</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240327</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see  Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see  Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
    <Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
  </NDC>
</NDCList>