{
"NDC": [
{
"NDCCode": "31722-277-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) ",
"NDC11Code": "31722-0277-32",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-277-31",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-31) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) ",
"NDC11Code": "31722-0277-31",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-277-33",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-33) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) ",
"NDC11Code": "31722-0277-33",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "31722-277-34",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) ",
"NDC11Code": "31722-0277-34",
"ProductNDC": "31722-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20240327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217821",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240327",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "11090-277-01",
"PackageDescription": "1 TUBE in 1 CARTON (11090-277-01) / 32 mL in 1 TUBE",
"NDC11Code": "11090-0277-01",
"ProductNDC": "11090-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Tan Warm",
"NonProprietaryName": "Octocrylene, Homosalate, Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Beauty Manufacturing Solutions Corp.",
"SubstanceName": "HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "83; 45; 56",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "49035-277-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (49035-277-32) ",
"NDC11Code": "49035-0277-32",
"ProductNDC": "49035-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"ProprietaryNameSuffix": "91 Percent",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140530",
"EndMarketingDate": "20260828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "EQUATE (Wal-Mart Stores, Inc.) (see also WAL-MART INC)",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140530",
"EndMarketingDatePackage": "20260828",
"SamplePackage": "N"
},
{
"NDCCode": "49035-277-64",
"PackageDescription": "2 BOTTLE, PLASTIC in 1 PACKAGE (49035-277-64) / 32 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "49035-0277-64",
"ProductNDC": "49035-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"ProprietaryNameSuffix": "91 Percent",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140530",
"EndMarketingDate": "20260828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "EQUATE (Wal-Mart Stores, Inc.) (see also WAL-MART INC)",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140530",
"EndMarketingDatePackage": "20260828",
"SamplePackage": "N"
},
{
"NDCCode": "51316-277-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (51316-277-32) ",
"NDC11Code": "51316-0277-32",
"ProductNDC": "51316-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "CVS PHARMACY, INC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "55319-277-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (55319-277-32) ",
"NDC11Code": "55319-0277-32",
"ProductNDC": "55319-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"ProprietaryNameSuffix": "91 Percent",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140630",
"EndMarketingDate": "20251230",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Family Dollar (FAMILY WELLNESS)",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140630",
"EndMarketingDatePackage": "20251230",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "55910-277-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (55910-277-32) ",
"NDC11Code": "55910-0277-32",
"ProductNDC": "55910-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"ProprietaryNameSuffix": "91 Percent",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Dolgencorp, Inc. (DOLLAR GENERAL & REXALL)",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2025-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200730",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in minor cuts, scrapes, and burns."
},
{
"NDCCode": "68196-277-32",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (68196-277-32) ",
"NDC11Code": "68196-0277-32",
"ProductNDC": "68196-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Isopropyl Alcohol",
"ProprietaryNameSuffix": "91 Percent",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Sam's West, Inc",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141130",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "73069-277-32",
"PackageDescription": "3 VIAL, MULTI-DOSE in 1 BOX (73069-277-32) > 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0277-32",
"ProductNDC": "73069-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-ki-ub",
"NonProprietaryName": "Nitric Acid , Succinic Acid , Escherichia Coli , Berberis Vulgaris Root , Equisetum Hyemale , Potassium Nitrate , Beef Kidney , Pork Kidney , Methyl Blue , Ononis Spinosa Whole , Clerodendranthus Spicatus Leaf , Chondrodendron Tomentosum Root , Plantago Major , Smilax Regelii Root , Solidago Virgaurea Flowering Top , Bos Taurus Ureter , Sus Scrofa Ureter , Bos Taurus Urinary Bladder , Sus Scrofa Urinary Bladder , Proteus Inconstans , Hieracium Pilosella Whole And Quinhydrone",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "NITRIC ACID; SUCCINIC ACID; ESCHERICHIA COLI; BERBERIS VULGARIS ROOT; EQUISETUM HYEMALE; POTASSIUM NITRATE; BEEF KIDNEY; PORK KIDNEY; METHYL BLUE; ONONIS SPINOSA WHOLE; CLERODENDRANTHUS SPICATUS LEAF; CHONDRODENDRON TOMENTOSUM ROOT; PLANTAGO MAJOR; SMILAX ORNATA ROOT; SOLIDAGO VIRGAUREA FLOWERING TOP; BOS TAURUS URETER; SUS SCROFA URETER; BOS TAURUS URINARY BLADDER; SUS SCROFA URINARY BLADDER; PROTEUS INCONSTANS; HIERACIUM PILOSELLA WHOLE; QUINHYDRONE",
"StrengthNumber": "31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA],Depigmenting Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N"
},
{
"NDCCode": "77285-277-32",
"PackageDescription": "946.35 mL in 1 BOTTLE, PLASTIC (77285-277-32) ",
"NDC11Code": "77285-0277-32",
"ProductNDC": "77285-277",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "91 Percent Pure Isopropyl Alcohol",
"NonProprietaryName": "Isopropyl Alcohol 91 Percent",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "MATRIX CHEMICAL LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "91",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201110",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent the risk of infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "31722-005-30",
"PackageDescription": "5 PACKAGE in 1 CARTON (31722-005-30) / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) ",
"NDC11Code": "31722-0005-30",
"ProductNDC": "31722-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20200319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213377",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2024-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200319",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:."
},
{
"NDCCode": "31722-005-31",
"PackageDescription": "7 PACKAGE in 1 CARTON (31722-005-31) / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) ",
"NDC11Code": "31722-0005-31",
"ProductNDC": "31722-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20200319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213377",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2024-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200319",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:."
},
{
"NDCCode": "31722-019-32",
"PackageDescription": "12 BOTTLE in 1 BOX (31722-019-32) / 120 mL in 1 BOTTLE (31722-019-12) ",
"NDC11Code": "31722-0019-32",
"ProductNDC": "31722-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diatrizoate Meglumine And Diatrizoate Sodium",
"NonProprietaryName": "Diatrizoate Meglumine And Diatrizoate Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL; RECTAL",
"StartMarketingDate": "20231117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215049",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "DIATRIZOATE MEGLUMINE; DIATRIZOATE SODIUM",
"StrengthNumber": "660; 100",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231117",
"SamplePackage": "N",
"IndicationAndUsage": "Diatrizoate meglumine and diatrizoate sodium solution is indicated for radiographic examination of segments of the gastrointestinal tract (esophagus, stomach, proximal small intestine, and colon). The preparation is particularly indicated when a more viscous agent such as barium sulfate, which is not water-soluble, is not feasible or is potentially dangerous. Diatrizoate meglumine and diatrizoate sodium solution may also be used as an adjunct to contrast enhancement in computed tomography of the torso (body imaging); the preparation is indicated, in conjunction with intravenous administration of a radiopaque contrast agent, when unenhanced imaging may not provide sufficient definition in distinguishing normal loops of bowel from adjacent organs or areas of suspected pathology.",
"Description": "Diatrizoate Meglumine and Diatrizoate Sodium Solution, USP is a palatable strawberry-flavored water-soluble iodinated radiopaque contrast medium for oral or rectal administration only. Each mL contains 660 mg diatrizoate meglumine USP and 100 mg diatrizoate sodium USP; pH has been adjusted to 6.0 to 7.6 with sodium hydroxide. Each mL contains approximately 4.8 mg (0.21 mEq) sodiumand 367 mg organically bound iodine. Inactive ingredients: edetate disodium dihydrate, polysorbate 80, saccharin sodium, simethicone, sodium hydroxide, strawberry flavor and tri-sodium citrate dihydrate. Diatrizoate meglumine is designated chemically as 1-deoxy-1-(methylamino)-D-glucitol 3,5- diacetamido-2,4,6-triiodobenzoate (salt); diatrizoate sodium is monosodium 3,5-diacetamido-2,4,6-triiodobenzoate. Structural formulas:. Diatrizoate meglumine C 11H 9I 3N 2O 4.C 7H 17NO 5 Molecular Weight: 809.13 Organically bound Iodine: 47.1%. Diatrizoate sodium C 11H 8I 3N 2NaO 4 Molecular Weight: 635.90 Organically bound Iodine: 59.9%."
},
{
"NDCCode": "31722-027-31",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (31722-027-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-027-32) ",
"NDC11Code": "31722-0027-31",
"ProductNDC": "31722-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215761",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220615",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "31722-028-31",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (31722-028-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-028-32) ",
"NDC11Code": "31722-0028-31",
"ProductNDC": "31722-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215761",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220615",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "31722-029-32",
"PackageDescription": "30 PACKET in 1 CARTON (31722-029-32) / 1 GRANULE in 1 PACKET",
"NDC11Code": "31722-0029-32",
"ProductNDC": "31722-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Deferasirox",
"NonProprietaryName": "Deferasirox",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216229",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "DEFERASIROX",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230316",
"SamplePackage": "N",
"IndicationAndUsage": "Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).",
"Description": "Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate."
},
{
"NDCCode": "31722-030-32",
"PackageDescription": "30 PACKET in 1 CARTON (31722-030-32) / 1 GRANULE in 1 PACKET",
"NDC11Code": "31722-0030-32",
"ProductNDC": "31722-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Deferasirox",
"NonProprietaryName": "Deferasirox",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216229",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "DEFERASIROX",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220922",
"SamplePackage": "N",
"IndicationAndUsage": "Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).",
"Description": "Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate."
},
{
"NDCCode": "31722-031-32",
"PackageDescription": "30 PACKET in 1 CARTON (31722-031-32) / 1 GRANULE in 1 PACKET",
"NDC11Code": "31722-0031-32",
"ProductNDC": "31722-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Deferasirox",
"NonProprietaryName": "Deferasirox",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216229",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "DEFERASIROX",
"StrengthNumber": "360",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220922",
"SamplePackage": "N",
"IndicationAndUsage": "Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).",
"Description": "Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate."
},
{
"NDCCode": "31722-032-32",
"PackageDescription": "30 PACKET in 1 CARTON (31722-032-32) / 1 GRANULE, DELAYED RELEASE in 1 PACKET",
"NDC11Code": "31722-0032-32",
"ProductNDC": "31722-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "GRANULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20231027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216139",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231027",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium for delayed-release oral suspension is indicated for:.",
"Description": "The active ingredient in pantoprazole sodium for delayed-release oral suspension, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S. 3/2 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium is supplied as a for delayed-release oral suspension in unit dose packets, available in one strength 40 mg pantoprazole, (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium for delayed-release oral suspension contains the following inactive ingredients: crospovidone, ferric oxide, hypromellose, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, polysorbate 80, sodium carbonate anhydrous, sodium lauryl sulfate, talc, titanium dioxide and triethyl citrate."
},
{
"NDCCode": "31722-046-32",
"PackageDescription": "9 POWDER, FOR SOLUTION in 1 CARTON (31722-046-32) ",
"NDC11Code": "31722-0046-32",
"ProductNDC": "31722-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Potassium",
"NonProprietaryName": "Diclofenac Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215375",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "DICLOFENAC POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220304",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac potassium for oral solution is indicated for the acute treatment of migraine attacks with or without aura in adults (18 years of age or older). Limitations of Use: Diclofenac potassium for oral solution is not indicated for the prophylactic therapy of migraine. The safety and effectiveness of diclofenac potassium for oral solution have not been established for cluster headache, which is present in an older, predominantly male population.",
"Description": "Diclofenac potassium for oral solution is a nonsteroidal anti-inflammatory drug, available as a buffered soluble powder, designed to be mixed with water prior to oral administration. Diclofenac potassium for oral solution is a white to off-white, buffered, flavored powder for oral solution packaged in individual unit dose packets. The chemical name is potassium [o-(2,6-dichloroanilino) phenyl] acetate. The molecular weight is 334.24 g/mole. Its molecular formula is C 14H 10Cl 2NKO 2, and it has the following structure. The inactive ingredients in diclofenac potassium for oral solution include: flavoring agent (peppermint), glyceryl behenate, mannitol, sucralose and tribasic sodium phosphate anhydrous."
},
{
"NDCCode": "31722-100-32",
"PackageDescription": "1 BOTTLE in 1 CARTON (31722-100-32) / 6 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "31722-0100-32",
"ProductNDC": "31722-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitazoxanide",
"NonProprietaryName": "Nitazoxanide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218701",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "NITAZOXANIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250415",
"SamplePackage": "N",
"IndicationAndUsage": "Diarrhea caused by Giardia lambliaor Cryptosporidium parvum: Nitazoxanide tablets (patients 12 years and older) are indicated for the treatment of diarrhea caused by Giardia lambliaor Cryptosporidium parvum. Limitations of Use Nitazoxanide tablets have not been shown to be effective for the treatment of diarrhea caused by Cryptosporidium parvumin HIV-infected or immunodeficient patients [see Clinical Studies (14.2)] .",
"Description": "Nitazoxanide tablets contain the active ingredient, nitazoxanide, a synthetic antiprotozoal for oral administration. Nitazoxanide is off-white to yellow powder. It is practically insoluble in ethanol, water and soluble in N, N-dimethylacetamide. Chemically, nitazoxanide is 2-((5-Nitrothiazol-2-yl) carbamoyl) phenyl acetate. The molecular formula is C 12H 9N 3O 5S and the molecular weight is 307.28. The structural formula is:. Nitazoxanide tablets contain 500 mg of nitazoxanide and the following inactive ingredients: corn starch, D&C yellow #10 aluminum lake, FD&C blue #2, FD&C yellow #6, hypromellose, lecithin (soya), magnesium stearate, polyvinyl alcohol, pregelatinized starch, sodium starch glycolate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "31722-116-32",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (31722-116-32) / 20 mL in 1 VIAL, MULTI-DOSE (31722-116-20) ",
"NDC11Code": "31722-0116-32",
"ProductNDC": "31722-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "31722-117-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-117-05) ",
"NDC11Code": "31722-0117-32",
"ProductNDC": "31722-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-118-32",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-118-05) ",
"NDC11Code": "31722-0118-32",
"ProductNDC": "31722-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214339",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211108",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate)."
},
{
"NDCCode": "31722-151-32",
"PackageDescription": "100 TABLET, FILM COATED in 1 BLISTER PACK (31722-151-32) ",
"NDC11Code": "31722-0151-32",
"ProductNDC": "31722-151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210623",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
},
{
"NDCCode": "31722-152-32",
"PackageDescription": "100 TABLET, FILM COATED in 1 BLISTER PACK (31722-152-32) ",
"NDC11Code": "31722-0152-32",
"ProductNDC": "31722-152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210623",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
},
{
"NDCCode": "31722-153-32",
"PackageDescription": "100 TABLET, FILM COATED in 1 BLISTER PACK (31722-153-32) ",
"NDC11Code": "31722-0153-32",
"ProductNDC": "31722-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210623",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>31722-277-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-32) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) </PackageDescription>
<NDC11Code>31722-0277-32</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-277-31</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-31) / 10 mL in 1 VIAL, SINGLE-DOSE (31722-277-10) </PackageDescription>
<NDC11Code>31722-0277-31</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-277-33</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-33) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) </PackageDescription>
<NDC11Code>31722-0277-33</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>31722-277-34</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-277-34) / 30 mL in 1 VIAL, SINGLE-DOSE (31722-277-30) </PackageDescription>
<NDC11Code>31722-0277-34</NDC11Code>
<ProductNDC>31722-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20240327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217821</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)]. Limitations of Use Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [see Dosage and Administration (2.2), Contraindications (4), Warnings and Precautions (5.1, 5.5, 5.7, 5.9)].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Bupivacaine hydrochloride, USP is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white or almost white, crystalline powder or colorless crystals that is soluble in water, freely soluble in alcohol. It has the molecular formula C 18H 28N 2O.HCl.H 2O and it has the following structural formula:. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile, isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>11090-277-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11090-277-01) / 32 mL in 1 TUBE</PackageDescription>
<NDC11Code>11090-0277-01</NDC11Code>
<ProductNDC>11090-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Tan Warm</ProprietaryName>
<NonProprietaryName>Octocrylene, Homosalate, Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Beauty Manufacturing Solutions Corp.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>83; 45; 56</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49035-277-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (49035-277-32) </PackageDescription>
<NDC11Code>49035-0277-32</NDC11Code>
<ProductNDC>49035-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<ProprietaryNameSuffix>91 Percent</ProprietaryNameSuffix>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140530</StartMarketingDate>
<EndMarketingDate>20260828</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>EQUATE (Wal-Mart Stores, Inc.) (see also WAL-MART INC)</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140530</StartMarketingDatePackage>
<EndMarketingDatePackage>20260828</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49035-277-64</NDCCode>
<PackageDescription>2 BOTTLE, PLASTIC in 1 PACKAGE (49035-277-64) / 32 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>49035-0277-64</NDC11Code>
<ProductNDC>49035-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<ProprietaryNameSuffix>91 Percent</ProprietaryNameSuffix>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140530</StartMarketingDate>
<EndMarketingDate>20260828</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>EQUATE (Wal-Mart Stores, Inc.) (see also WAL-MART INC)</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140530</StartMarketingDatePackage>
<EndMarketingDatePackage>20260828</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51316-277-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (51316-277-32) </PackageDescription>
<NDC11Code>51316-0277-32</NDC11Code>
<ProductNDC>51316-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>CVS PHARMACY, INC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55319-277-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (55319-277-32) </PackageDescription>
<NDC11Code>55319-0277-32</NDC11Code>
<ProductNDC>55319-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<ProprietaryNameSuffix>91 Percent</ProprietaryNameSuffix>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140630</StartMarketingDate>
<EndMarketingDate>20251230</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Family Dollar (FAMILY WELLNESS)</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140630</StartMarketingDatePackage>
<EndMarketingDatePackage>20251230</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55910-277-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (55910-277-32) </PackageDescription>
<NDC11Code>55910-0277-32</NDC11Code>
<ProductNDC>55910-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<ProprietaryNameSuffix>91 Percent</ProprietaryNameSuffix>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Dolgencorp, Inc. (DOLLAR GENERAL & REXALL)</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in minor cuts, scrapes, and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68196-277-32</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (68196-277-32) </PackageDescription>
<NDC11Code>68196-0277-32</NDC11Code>
<ProductNDC>68196-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Isopropyl Alcohol</ProprietaryName>
<ProprietaryNameSuffix>91 Percent</ProprietaryNameSuffix>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Sam's West, Inc</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73069-277-32</NDCCode>
<PackageDescription>3 VIAL, MULTI-DOSE in 1 BOX (73069-277-32) > 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0277-32</NDC11Code>
<ProductNDC>73069-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-ki-ub</ProprietaryName>
<NonProprietaryName>Nitric Acid , Succinic Acid , Escherichia Coli , Berberis Vulgaris Root , Equisetum Hyemale , Potassium Nitrate , Beef Kidney , Pork Kidney , Methyl Blue , Ononis Spinosa Whole , Clerodendranthus Spicatus Leaf , Chondrodendron Tomentosum Root , Plantago Major , Smilax Regelii Root , Solidago Virgaurea Flowering Top , Bos Taurus Ureter , Sus Scrofa Ureter , Bos Taurus Urinary Bladder , Sus Scrofa Urinary Bladder , Proteus Inconstans , Hieracium Pilosella Whole And Quinhydrone</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>NITRIC ACID; SUCCINIC ACID; ESCHERICHIA COLI; BERBERIS VULGARIS ROOT; EQUISETUM HYEMALE; POTASSIUM NITRATE; BEEF KIDNEY; PORK KIDNEY; METHYL BLUE; ONONIS SPINOSA WHOLE; CLERODENDRANTHUS SPICATUS LEAF; CHONDRODENDRON TOMENTOSUM ROOT; PLANTAGO MAJOR; SMILAX ORNATA ROOT; SOLIDAGO VIRGAUREA FLOWERING TOP; BOS TAURUS URETER; SUS SCROFA URETER; BOS TAURUS URINARY BLADDER; SUS SCROFA URINARY BLADDER; PROTEUS INCONSTANS; HIERACIUM PILOSELLA WHOLE; QUINHYDRONE</SubstanceName>
<StrengthNumber>31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31; 31</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA],Depigmenting Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>77285-277-32</NDCCode>
<PackageDescription>946.35 mL in 1 BOTTLE, PLASTIC (77285-277-32) </PackageDescription>
<NDC11Code>77285-0277-32</NDC11Code>
<ProductNDC>77285-277</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>91 Percent Pure Isopropyl Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol 91 Percent</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>MATRIX CHEMICAL LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>91</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent the risk of infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-005-30</NDCCode>
<PackageDescription>5 PACKAGE in 1 CARTON (31722-005-30) / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) </PackageDescription>
<NDC11Code>31722-0005-30</NDC11Code>
<ProductNDC>31722-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20200319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213377</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>31722-005-31</NDCCode>
<PackageDescription>7 PACKAGE in 1 CARTON (31722-005-31) / 6 SUPPOSITORY in 1 PACKAGE (31722-005-32) </PackageDescription>
<NDC11Code>31722-0005-31</NDC11Code>
<ProductNDC>31722-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20200319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213377</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in mesalamine 1,000 mg suppositories for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository contains 1,000 mg of mesalamine USP in a base of Hard Fat, NF. The molecular formula is C 7H 7NO 3, representing a molecular weight of 153.14. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>31722-019-32</NDCCode>
<PackageDescription>12 BOTTLE in 1 BOX (31722-019-32) / 120 mL in 1 BOTTLE (31722-019-12) </PackageDescription>
<NDC11Code>31722-0019-32</NDC11Code>
<ProductNDC>31722-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diatrizoate Meglumine And Diatrizoate Sodium</ProprietaryName>
<NonProprietaryName>Diatrizoate Meglumine And Diatrizoate Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL; RECTAL</RouteName>
<StartMarketingDate>20231117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215049</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DIATRIZOATE MEGLUMINE; DIATRIZOATE SODIUM</SubstanceName>
<StrengthNumber>660; 100</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diatrizoate meglumine and diatrizoate sodium solution is indicated for radiographic examination of segments of the gastrointestinal tract (esophagus, stomach, proximal small intestine, and colon). The preparation is particularly indicated when a more viscous agent such as barium sulfate, which is not water-soluble, is not feasible or is potentially dangerous. Diatrizoate meglumine and diatrizoate sodium solution may also be used as an adjunct to contrast enhancement in computed tomography of the torso (body imaging); the preparation is indicated, in conjunction with intravenous administration of a radiopaque contrast agent, when unenhanced imaging may not provide sufficient definition in distinguishing normal loops of bowel from adjacent organs or areas of suspected pathology.</IndicationAndUsage>
<Description>Diatrizoate Meglumine and Diatrizoate Sodium Solution, USP is a palatable strawberry-flavored water-soluble iodinated radiopaque contrast medium for oral or rectal administration only. Each mL contains 660 mg diatrizoate meglumine USP and 100 mg diatrizoate sodium USP; pH has been adjusted to 6.0 to 7.6 with sodium hydroxide. Each mL contains approximately 4.8 mg (0.21 mEq) sodiumand 367 mg organically bound iodine. Inactive ingredients: edetate disodium dihydrate, polysorbate 80, saccharin sodium, simethicone, sodium hydroxide, strawberry flavor and tri-sodium citrate dihydrate. Diatrizoate meglumine is designated chemically as 1-deoxy-1-(methylamino)-D-glucitol 3,5- diacetamido-2,4,6-triiodobenzoate (salt); diatrizoate sodium is monosodium 3,5-diacetamido-2,4,6-triiodobenzoate. Structural formulas:. Diatrizoate meglumine C 11H 9I 3N 2O 4.C 7H 17NO 5 Molecular Weight: 809.13 Organically bound Iodine: 47.1%. Diatrizoate sodium C 11H 8I 3N 2NaO 4 Molecular Weight: 635.90 Organically bound Iodine: 59.9%.</Description>
</NDC>
<NDC>
<NDCCode>31722-027-31</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (31722-027-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-027-32) </PackageDescription>
<NDC11Code>31722-0027-31</NDC11Code>
<ProductNDC>31722-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215761</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-028-31</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (31722-028-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK (31722-028-32) </PackageDescription>
<NDC11Code>31722-0028-31</NDC11Code>
<ProductNDC>31722-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215761</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-3,4-Dihydro-1-phenyl-2(1H) isoquinoline carboxylic acid (3R)-1-azabicyclo-[2.2.2] oct-3yl ester succinate having an empirical formula of C 27H 32N 2O 6, and a molecular weight of 480.55. The structural formula of solifenacin succinate is:. Solifenacin succinate is a white to pale yellow color crystalline powder. It is freely soluble in methanol, water, dimethyl sulfoxide and acetic acid. Each solifenacin succinate tablet contains 5 or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate. The film coating contains hypromellose polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-029-32</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (31722-029-32) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>31722-0029-32</NDC11Code>
<ProductNDC>31722-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Deferasirox</ProprietaryName>
<NonProprietaryName>Deferasirox</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216229</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DEFERASIROX</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
<Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>31722-030-32</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (31722-030-32) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>31722-0030-32</NDC11Code>
<ProductNDC>31722-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Deferasirox</ProprietaryName>
<NonProprietaryName>Deferasirox</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216229</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DEFERASIROX</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
<Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>31722-031-32</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (31722-031-32) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>31722-0031-32</NDC11Code>
<ProductNDC>31722-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Deferasirox</ProprietaryName>
<NonProprietaryName>Deferasirox</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216229</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DEFERASIROX</SubstanceName>
<StrengthNumber>360</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Deferasirox oral granules are an iron chelator indicated for the treatment of chronic iron overload due to blood transfusions in patients 2 years of age and older. ( 1.1) Deferasirox oral granules are indicated for the treatment of chronic iron overload in patients 10 years of age and older with non-transfusion-dependent thalassemia (NTDT) syndromes, and with a liver iron (Fe) concentration (LIC) of at least 5 mg Fe per gram of dry weight (Fe/g dw) and a serum ferritin greater than 300 mcg/L. ( 1.2) Limitations of Use: The safety and efficacy of deferasirox oral granules when administered with other iron chelation therapy have not been established. ( 1.3).</IndicationAndUsage>
<Description>Deferasirox is an iron-chelating agent provided as a oral granules for oral use. Deferasirox is designated chemically as [4-[(3Z,5E)-3,5-bis(6-oxo-1-cyclohexa-2,4-dienylidene)-1,2,4-triazolidin-1-yl]benzoic acid and has the following structural formula. Deferasirox is an off white to slightly yellow color crystalline powder. It has a molecular formula C 21H 15N 3O 4and molecular weight of 373.36 g/mol. It is practically in-soluble in water and freely soluble in dimethyl formamide Deferasirox oral granules contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, microcrystalline cellulose, poloxamer (188), povidone (K30), sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>31722-032-32</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (31722-032-32) / 1 GRANULE, DELAYED RELEASE in 1 PACKET</PackageDescription>
<NDC11Code>31722-0032-32</NDC11Code>
<ProductNDC>31722-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>GRANULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216139</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium for delayed-release oral suspension is indicated for:.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for delayed-release oral suspension, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S. 3/2 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium is supplied as a for delayed-release oral suspension in unit dose packets, available in one strength 40 mg pantoprazole, (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium for delayed-release oral suspension contains the following inactive ingredients: crospovidone, ferric oxide, hypromellose, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, polysorbate 80, sodium carbonate anhydrous, sodium lauryl sulfate, talc, titanium dioxide and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>31722-046-32</NDCCode>
<PackageDescription>9 POWDER, FOR SOLUTION in 1 CARTON (31722-046-32) </PackageDescription>
<NDC11Code>31722-0046-32</NDC11Code>
<ProductNDC>31722-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Potassium</ProprietaryName>
<NonProprietaryName>Diclofenac Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215375</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DICLOFENAC POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac potassium for oral solution is indicated for the acute treatment of migraine attacks with or without aura in adults (18 years of age or older). Limitations of Use: Diclofenac potassium for oral solution is not indicated for the prophylactic therapy of migraine. The safety and effectiveness of diclofenac potassium for oral solution have not been established for cluster headache, which is present in an older, predominantly male population.</IndicationAndUsage>
<Description>Diclofenac potassium for oral solution is a nonsteroidal anti-inflammatory drug, available as a buffered soluble powder, designed to be mixed with water prior to oral administration. Diclofenac potassium for oral solution is a white to off-white, buffered, flavored powder for oral solution packaged in individual unit dose packets. The chemical name is potassium [o-(2,6-dichloroanilino) phenyl] acetate. The molecular weight is 334.24 g/mole. Its molecular formula is C 14H 10Cl 2NKO 2, and it has the following structure. The inactive ingredients in diclofenac potassium for oral solution include: flavoring agent (peppermint), glyceryl behenate, mannitol, sucralose and tribasic sodium phosphate anhydrous.</Description>
</NDC>
<NDC>
<NDCCode>31722-100-32</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (31722-100-32) / 6 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>31722-0100-32</NDC11Code>
<ProductNDC>31722-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitazoxanide</ProprietaryName>
<NonProprietaryName>Nitazoxanide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218701</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NITAZOXANIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diarrhea caused by Giardia lambliaor Cryptosporidium parvum: Nitazoxanide tablets (patients 12 years and older) are indicated for the treatment of diarrhea caused by Giardia lambliaor Cryptosporidium parvum. Limitations of Use Nitazoxanide tablets have not been shown to be effective for the treatment of diarrhea caused by Cryptosporidium parvumin HIV-infected or immunodeficient patients [see Clinical Studies (14.2)] .</IndicationAndUsage>
<Description>Nitazoxanide tablets contain the active ingredient, nitazoxanide, a synthetic antiprotozoal for oral administration. Nitazoxanide is off-white to yellow powder. It is practically insoluble in ethanol, water and soluble in N, N-dimethylacetamide. Chemically, nitazoxanide is 2-((5-Nitrothiazol-2-yl) carbamoyl) phenyl acetate. The molecular formula is C 12H 9N 3O 5S and the molecular weight is 307.28. The structural formula is:. Nitazoxanide tablets contain 500 mg of nitazoxanide and the following inactive ingredients: corn starch, D&C yellow #10 aluminum lake, FD&C blue #2, FD&C yellow #6, hypromellose, lecithin (soya), magnesium stearate, polyvinyl alcohol, pregelatinized starch, sodium starch glycolate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>31722-116-32</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (31722-116-32) / 20 mL in 1 VIAL, MULTI-DOSE (31722-116-20) </PackageDescription>
<NDC11Code>31722-0116-32</NDC11Code>
<ProductNDC>31722-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-117-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-117-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-117-05) </PackageDescription>
<NDC11Code>31722-0117-32</NDC11Code>
<ProductNDC>31722-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-118-32</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (31722-118-32) / 5 mL in 1 VIAL, SINGLE-DOSE (31722-118-05) </PackageDescription>
<NDC11Code>31722-0118-32</NDC11Code>
<ProductNDC>31722-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214339</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, USP, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8. g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O.HCl, and has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg/mL lidocaine hydrochloride, USP (monohydrate). μ Quantity is equivalent to 21.4 mg/mL lidocaine hydrochloride, USP (monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>31722-151-32</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-151-32) </PackageDescription>
<NDC11Code>31722-0151-32</NDC11Code>
<ProductNDC>31722-151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>31722-152-32</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-152-32) </PackageDescription>
<NDC11Code>31722-0152-32</NDC11Code>
<ProductNDC>31722-152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>31722-153-32</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BLISTER PACK (31722-153-32) </PackageDescription>
<NDC11Code>31722-0153-32</NDC11Code>
<ProductNDC>31722-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: Hypertension, to lower blood pressure in adults and children 1 year and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Heart failure(NYHA class II to IV), to reduce hospitalization for heart failure in adults ( 1.2) Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults ( 1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan is chemically described as L-valine, N-(1-oxopentyl)- N-[[2′-(1 H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its molecular formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
</NDCList>