{
"NDC": [
{
"NDCCode": "36987-1317-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1317-3)",
"NDC11Code": "36987-1317-03",
"ProductNDC": "36987-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cranberry",
"NonProprietaryName": "Cranberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CRANBERRY",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1317-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1317-1)",
"NDC11Code": "36987-1317-01",
"ProductNDC": "36987-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cranberry",
"NonProprietaryName": "Cranberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CRANBERRY",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1317-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1317-2)",
"NDC11Code": "36987-1317-02",
"ProductNDC": "36987-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cranberry",
"NonProprietaryName": "Cranberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CRANBERRY",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1317-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-1317-4)",
"NDC11Code": "36987-1317-04",
"ProductNDC": "36987-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cranberry",
"NonProprietaryName": "Cranberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CRANBERRY",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1317-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-1317-3) ",
"NDC11Code": "37662-1317-03",
"ProductNDC": "37662-1317",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vinca Minor",
"NonProprietaryName": "Vinca Minor",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220811",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "VINCA MINOR",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220811",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1317-3",
"PackageDescription": "12 CONTAINER in 1 CASE (51662-1317-3) / 500 mL in 1 CONTAINER (51662-1317-2) ",
"NDC11Code": "51662-1317-03",
"ProductNDC": "51662-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "6% Hetastarch In 0.9% Sodium Chloride",
"NonProprietaryName": "6% Hetastarch In 0.9% Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "BA740193",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "HETASTARCH",
"StrengthNumber": "6",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]",
"Status": "Active",
"LastUpdate": "2024-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181126",
"SamplePackage": "N",
"IndicationAndUsage": "6% Hetastarch in 0.9% Sodium Chloride Injection is indicated in the treatment of hypovolemia when plasma volume expansion is desired. It is not a substitute for blood or plasma. The adjunctive use of 6% Hetastarch in 0.9% Sodium Chloride Injection in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.",
"Description": "6% Hetastarch in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains: Hetastarch............................................................................ 6 g Sodium Chloride, USP........................................................ 0.9 g Water for Injection, USP..................................................... qs pH adjusted with Sodium Hydroxide, NF if necessary Concentration of Electrolytes (mEq/L): Sodium (Na+) 154, Chloride (Cl-) 154 (not including ions for pH adjustment). pH: 5.5 (3.5 to 7.0) Total osmolar concentration is 308 mOsmol/liter (calc). Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 550,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is one 1-6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2, R3, and R6 are H or CH2CH2OH, or R6 is a branching point in the starch polymer connected through a 1-6 linkage to additional alpha-D-glucopyranosyl units. Hetastarch is an artificial colloid pharmacologically classified as a plasma volume expander; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 6% Hetastarch in 0.9% Sodium Chloride Injection is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "51672-1317-3",
"PackageDescription": "1 TUBE in 1 CARTON (51672-1317-3) / 50 g in 1 TUBE",
"NDC11Code": "51672-1317-03",
"ProductNDC": "51672-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20041012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076753",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041012",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax."
},
{
"NDCCode": "60505-1317-3",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (60505-1317-3) ",
"NDC11Code": "60505-1317-03",
"ProductNDC": "60505-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paroxetine Hydrochloride",
"NonProprietaryName": "Paroxetine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020936",
"LabelerName": "Apotex Corp",
"SubstanceName": "PAROXETINE HYDROCHLORIDE HEMIHYDRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"IndicationAndUsage": "Paroxetine HCL CR is indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Panic disorder (PD), 3 Social anxiety disorder (SAD), 4 Premenstrual dysphoric disorder (PMDD).",
"Description": "Paroxetine HCL CR USP, contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3·HCl·1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off‑white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine HCL CR tablets, USP are intended for oral administration. Each extended‑release tablet contains 12.5 mg, 25 mg, or 37.5 mg paroxetine equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. One layer of the tablet consists of a degradable barrier layer and the other contains the active material in a hydrophilic matrix. Inactive ingredients consist of glyceryl behenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type C, polyethylene glycols, polysorbate 80, polyvinylpyrrolidone, silicon dioxide, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate and the following colorants: D&C Red No. 30 aluminum lake (25 mg), D&C Yellow No. 10 aluminum lake (12.5 mg), FD&C Blue No. 2 aluminum lake (37.5 mg), FD&C Yellow No. 6 aluminum lake (12.5 mg), red ferric oxide (25 mg) and Yellow ferric oxide (12.5 mg and 37.5 mg)."
},
{
"NDCCode": "63629-1317-3",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (63629-1317-3) ",
"NDC11Code": "63629-1317-03",
"ProductNDC": "63629-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065229",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20060111",
"SamplePackage": "N"
},
{
"NDCCode": "64942-1317-3",
"PackageDescription": "14 g in 1 CONTAINER (64942-1317-3)",
"NDC11Code": "64942-1317-03",
"ProductNDC": "64942-1317",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Degree",
"ProprietaryNameSuffix": "Overtime Antiperspirant And Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "19.2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Usesreduces underarm wetness."
},
{
"NDCCode": "67046-1317-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-1317-3) ",
"NDC11Code": "67046-1317-03",
"ProductNDC": "67046-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214982",
"LabelerName": "Coupler LLC",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260610",
"SamplePackage": "N",
"IndicationAndUsage": "Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. ( 1.1) , 2 Increasing myocardial contractility in pediatric patients with heart failure. ( 1.2) , 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. ( 1.3) .",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C 41H 64O 14, its molecular weight is 780.95, and its structural formula is:. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "67296-1317-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1317-3) ",
"NDC11Code": "67296-1317-03",
"ProductNDC": "67296-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077929",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20060719",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Osteoarthritis (OA). Meloxicam is indicated for relief of the signs and symptoms of osteoarthritis [see Clinical Studies (14.1)]. 1.2 Rheumatoid Arthritis (RA). Meloxicam is indicated for relief of the signs and symptoms of rheumatoid arthritis [see Clinical Studies (14.1)]. 1.3 Juvenile Rheumatoid Arthritis (JRA) Pauciarticular and Polyarticular Course. Meloxicam is indicated for relief of the signs and symptoms of pauciarticular or polyarticular course Juvenile Rheumatoid Arthritis in patients who weighs ≥ 60 kg [see Dosage and Administration (2.4) and Clinical Studies (14.2)].",
"Description": "Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each tablet contains 7.5 mg or 15 mg meloxicam, USP for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl-N-(5-methyl-2-thiazolyl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C14H13N3O4S2 and it has the following structural formula. [image]. Meloxicam is a pale yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P)app = 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam is available as a tablet for oral administration containing 7.5 mg or 15 mg meloxicam, USP. The inactive ingredients in meloxicam tablets, USP include starch, microcrystalline cellulose, lactose anhydrous, colloidal silicon dioxide, sodium citrate dihydrate, magnesium stearate."
},
{
"NDCCode": "70771-1317-3",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70771-1317-3) ",
"NDC11Code": "70771-1317-03",
"ProductNDC": "70771-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207382",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2023-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180405",
"SamplePackage": "N"
},
{
"NDCCode": "71335-1317-3",
"PackageDescription": "10 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (71335-1317-3) ",
"NDC11Code": "71335-1317-03",
"ProductNDC": "71335-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090174",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220209",
"SamplePackage": "N"
},
{
"NDCCode": "0115-1317-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-01) ",
"NDC11Code": "00115-1317-01",
"ProductNDC": "0115-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1317-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-03) ",
"NDC11Code": "00115-1317-03",
"ProductNDC": "0115-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1317-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-08) ",
"NDC11Code": "00115-1317-08",
"ProductNDC": "0115-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0115-1317-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-13) ",
"NDC11Code": "00115-1317-13",
"ProductNDC": "0115-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "0270-1317-02",
"PackageDescription": "10 BOTTLE in 1 BOX (0270-1317-02) / 100 mL in 1 BOTTLE",
"NDC11Code": "00270-1317-02",
"ProductNDC": "0270-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "250",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "BRACCO DIAGNOSTICS INC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "510",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients."
},
{
"NDCCode": "0536-1317-83",
"PackageDescription": "355 mL in 1 BOTTLE (0536-1317-83) ",
"NDC11Code": "00536-1317-83",
"ProductNDC": "0536-1317",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Regular Strength Antacid/antigas",
"NonProprietaryName": "Aluminum Hydroxide, Magnesium Hydroxide, Dimethicone",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20200801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "RUGBY LABORATORIES",
"SubstanceName": "ALUMINUM HYDROXIDE; MAGNESIUM HYDROXIDE; DIMETHICONE",
"StrengthNumber": "400; 400; 40",
"StrengthUnit": "mg/10mL; mg/10mL; mg/10mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Skin Barrier Activity [PE], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200801",
"SamplePackage": "N",
"IndicationAndUsage": "relieves. : 1 heartburn, 2 sour stomach, 3 acid indigestion, 4 the symptoms referred to as gas."
},
{
"NDCCode": "43742-1317-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1317-1) ",
"NDC11Code": "43742-1317-01",
"ProductNDC": "43742-1317",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neuro",
"ProprietaryNameSuffix": "I",
"NonProprietaryName": "Taraxacum Officinale, Hydrastis Canadensis, Melatonin, Dopamine Hydrochloride, L-dopa, Serotonin (hydrochloride)",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20180727",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "TARAXACUM OFFICINALE; GOLDENSEAL; MELATONIN; DOPAMINE HYDROCHLORIDE; LEVODOPA; SEROTONIN HYDROCHLORIDE",
"StrengthNumber": "3; 6; 6; 8; 8; 8",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2024-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180727",
"SamplePackage": "N",
"IndicationAndUsage": " For the temporary relief of symptoms including. brain fatigue brain fog anxiety. poor concentration jet lag. mood swings stress travel sickness. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "51662-1317-1",
"PackageDescription": "500 mL in 1 CONTAINER (51662-1317-1) ",
"NDC11Code": "51662-1317-01",
"ProductNDC": "51662-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "6% Hetastarch In 0.9% Sodium Chloride",
"NonProprietaryName": "6% Hetastarch In 0.9% Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "BA740193",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "HETASTARCH",
"StrengthNumber": "6",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]",
"Status": "Active",
"LastUpdate": "2024-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181126",
"SamplePackage": "N",
"IndicationAndUsage": "6% Hetastarch in 0.9% Sodium Chloride Injection is indicated in the treatment of hypovolemia when plasma volume expansion is desired. It is not a substitute for blood or plasma. The adjunctive use of 6% Hetastarch in 0.9% Sodium Chloride Injection in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.",
"Description": "6% Hetastarch in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains: Hetastarch............................................................................ 6 g Sodium Chloride, USP........................................................ 0.9 g Water for Injection, USP..................................................... qs pH adjusted with Sodium Hydroxide, NF if necessary Concentration of Electrolytes (mEq/L): Sodium (Na+) 154, Chloride (Cl-) 154 (not including ions for pH adjustment). pH: 5.5 (3.5 to 7.0) Total osmolar concentration is 308 mOsmol/liter (calc). Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 550,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is one 1-6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2, R3, and R6 are H or CH2CH2OH, or R6 is a branching point in the starch polymer connected through a 1-6 linkage to additional alpha-D-glucopyranosyl units. Hetastarch is an artificial colloid pharmacologically classified as a plasma volume expander; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 6% Hetastarch in 0.9% Sodium Chloride Injection is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "51672-1317-1",
"PackageDescription": "1 TUBE in 1 CARTON (51672-1317-1) / 15 g in 1 TUBE",
"NDC11Code": "51672-1317-01",
"ProductNDC": "51672-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20041012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076753",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041012",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax."
},
{
"NDCCode": "51672-1317-5",
"PackageDescription": "5 g in 1 TUBE (51672-1317-5) ",
"NDC11Code": "51672-1317-05",
"ProductNDC": "51672-1317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20041012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076753",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041012",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax."
},
{
"NDCCode": "36987-1001-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1001-3)",
"NDC11Code": "36987-1001-03",
"ProductNDC": "36987-1001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1002-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1002-3)",
"NDC11Code": "36987-1002-03",
"ProductNDC": "36987-1002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1003-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1003-3)",
"NDC11Code": "36987-1003-03",
"ProductNDC": "36987-1003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1004-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1004-3)",
"NDC11Code": "36987-1004-03",
"ProductNDC": "36987-1004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1005-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1005-3)",
"NDC11Code": "36987-1005-03",
"ProductNDC": "36987-1005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1006-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1006-3)",
"NDC11Code": "36987-1006-03",
"ProductNDC": "36987-1006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cattle Epithelium",
"NonProprietaryName": "Cattle Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>36987-1317-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1317-3)</PackageDescription>
<NDC11Code>36987-1317-03</NDC11Code>
<ProductNDC>36987-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cranberry</ProprietaryName>
<NonProprietaryName>Cranberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CRANBERRY</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1317-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1317-1)</PackageDescription>
<NDC11Code>36987-1317-01</NDC11Code>
<ProductNDC>36987-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cranberry</ProprietaryName>
<NonProprietaryName>Cranberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CRANBERRY</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1317-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1317-2)</PackageDescription>
<NDC11Code>36987-1317-02</NDC11Code>
<ProductNDC>36987-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cranberry</ProprietaryName>
<NonProprietaryName>Cranberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CRANBERRY</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1317-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1317-4)</PackageDescription>
<NDC11Code>36987-1317-04</NDC11Code>
<ProductNDC>36987-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cranberry</ProprietaryName>
<NonProprietaryName>Cranberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CRANBERRY</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Non-Standardized Food Allergenic Extract [EPC],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1317-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-1317-3) </PackageDescription>
<NDC11Code>37662-1317-03</NDC11Code>
<ProductNDC>37662-1317</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vinca Minor</ProprietaryName>
<NonProprietaryName>Vinca Minor</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220811</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>VINCA MINOR</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220811</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1317-3</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (51662-1317-3) / 500 mL in 1 CONTAINER (51662-1317-2) </PackageDescription>
<NDC11Code>51662-1317-03</NDC11Code>
<ProductNDC>51662-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>6% Hetastarch In 0.9% Sodium Chloride</ProprietaryName>
<NonProprietaryName>6% Hetastarch In 0.9% Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>BA740193</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>HETASTARCH</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>6% Hetastarch in 0.9% Sodium Chloride Injection is indicated in the treatment of hypovolemia when plasma volume expansion is desired. It is not a substitute for blood or plasma. The adjunctive use of 6% Hetastarch in 0.9% Sodium Chloride Injection in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.</IndicationAndUsage>
<Description>6% Hetastarch in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains: Hetastarch............................................................................ 6 g Sodium Chloride, USP........................................................ 0.9 g Water for Injection, USP..................................................... qs pH adjusted with Sodium Hydroxide, NF if necessary Concentration of Electrolytes (mEq/L): Sodium (Na+) 154, Chloride (Cl-) 154 (not including ions for pH adjustment). pH: 5.5 (3.5 to 7.0) Total osmolar concentration is 308 mOsmol/liter (calc). Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 550,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is one 1-6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2, R3, and R6 are H or CH2CH2OH, or R6 is a branching point in the starch polymer connected through a 1-6 linkage to additional alpha-D-glucopyranosyl units. Hetastarch is an artificial colloid pharmacologically classified as a plasma volume expander; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 6% Hetastarch in 0.9% Sodium Chloride Injection is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>51672-1317-3</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (51672-1317-3) / 50 g in 1 TUBE</PackageDescription>
<NDC11Code>51672-1317-03</NDC11Code>
<ProductNDC>51672-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20041012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076753</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax.</Description>
</NDC>
<NDC>
<NDCCode>60505-1317-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (60505-1317-3) </PackageDescription>
<NDC11Code>60505-1317-03</NDC11Code>
<ProductNDC>60505-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paroxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Paroxetine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020936</ApplicationNumber>
<LabelerName>Apotex Corp</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paroxetine HCL CR is indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Panic disorder (PD), 3 Social anxiety disorder (SAD), 4 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Paroxetine HCL CR USP, contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3·HCl·1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off‑white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine HCL CR tablets, USP are intended for oral administration. Each extended‑release tablet contains 12.5 mg, 25 mg, or 37.5 mg paroxetine equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. One layer of the tablet consists of a degradable barrier layer and the other contains the active material in a hydrophilic matrix. Inactive ingredients consist of glyceryl behenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type C, polyethylene glycols, polysorbate 80, polyvinylpyrrolidone, silicon dioxide, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate and the following colorants: D&C Red No. 30 aluminum lake (25 mg), D&C Yellow No. 10 aluminum lake (12.5 mg), FD&C Blue No. 2 aluminum lake (37.5 mg), FD&C Yellow No. 6 aluminum lake (12.5 mg), red ferric oxide (25 mg) and Yellow ferric oxide (12.5 mg and 37.5 mg).</Description>
</NDC>
<NDC>
<NDCCode>63629-1317-3</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (63629-1317-3) </PackageDescription>
<NDC11Code>63629-1317-03</NDC11Code>
<ProductNDC>63629-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065229</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64942-1317-3</NDCCode>
<PackageDescription>14 g in 1 CONTAINER (64942-1317-3)</PackageDescription>
<NDC11Code>64942-1317-03</NDC11Code>
<ProductNDC>64942-1317</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Degree</ProprietaryName>
<ProprietaryNameSuffix>Overtime Antiperspirant And Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>19.2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Usesreduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67046-1317-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-1317-3) </PackageDescription>
<NDC11Code>67046-1317-03</NDC11Code>
<ProductNDC>67046-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214982</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. ( 1.1) , 2 Increasing myocardial contractility in pediatric patients with heart failure. ( 1.2) , 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. ( 1.3) .</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)- O-2,6-dideoxy-β- D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β- D- ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C 41H 64O 14, its molecular weight is 780.95, and its structural formula is:. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>67296-1317-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1317-3) </PackageDescription>
<NDC11Code>67296-1317-03</NDC11Code>
<ProductNDC>67296-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077929</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Osteoarthritis (OA). Meloxicam is indicated for relief of the signs and symptoms of osteoarthritis [see Clinical Studies (14.1)]. 1.2 Rheumatoid Arthritis (RA). Meloxicam is indicated for relief of the signs and symptoms of rheumatoid arthritis [see Clinical Studies (14.1)]. 1.3 Juvenile Rheumatoid Arthritis (JRA) Pauciarticular and Polyarticular Course. Meloxicam is indicated for relief of the signs and symptoms of pauciarticular or polyarticular course Juvenile Rheumatoid Arthritis in patients who weighs ≥ 60 kg [see Dosage and Administration (2.4) and Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each tablet contains 7.5 mg or 15 mg meloxicam, USP for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl-N-(5-methyl-2-thiazolyl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C14H13N3O4S2 and it has the following structural formula. [image]. Meloxicam is a pale yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P)app = 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam is available as a tablet for oral administration containing 7.5 mg or 15 mg meloxicam, USP. The inactive ingredients in meloxicam tablets, USP include starch, microcrystalline cellulose, lactose anhydrous, colloidal silicon dioxide, sodium citrate dihydrate, magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70771-1317-3</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70771-1317-3) </PackageDescription>
<NDC11Code>70771-1317-03</NDC11Code>
<ProductNDC>70771-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207382</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-1317-3</NDCCode>
<PackageDescription>10 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (71335-1317-3) </PackageDescription>
<NDC11Code>71335-1317-03</NDC11Code>
<ProductNDC>71335-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090174</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0115-1317-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-01) </PackageDescription>
<NDC11Code>00115-1317-01</NDC11Code>
<ProductNDC>0115-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1317-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-03) </PackageDescription>
<NDC11Code>00115-1317-03</NDC11Code>
<ProductNDC>0115-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1317-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-08) </PackageDescription>
<NDC11Code>00115-1317-08</NDC11Code>
<ProductNDC>0115-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0115-1317-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0115-1317-13) </PackageDescription>
<NDC11Code>00115-1317-13</NDC11Code>
<ProductNDC>0115-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>0270-1317-02</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (0270-1317-02) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1317-02</NDC11Code>
<ProductNDC>0270-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>250</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>BRACCO DIAGNOSTICS INC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>510</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0536-1317-83</NDCCode>
<PackageDescription>355 mL in 1 BOTTLE (0536-1317-83) </PackageDescription>
<NDC11Code>00536-1317-83</NDC11Code>
<ProductNDC>0536-1317</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Regular Strength Antacid/antigas</ProprietaryName>
<NonProprietaryName>Aluminum Hydroxide, Magnesium Hydroxide, Dimethicone</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>RUGBY LABORATORIES</LabelerName>
<SubstanceName>ALUMINUM HYDROXIDE; MAGNESIUM HYDROXIDE; DIMETHICONE</SubstanceName>
<StrengthNumber>400; 400; 40</StrengthNumber>
<StrengthUnit>mg/10mL; mg/10mL; mg/10mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Skin Barrier Activity [PE], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves. : 1 heartburn, 2 sour stomach, 3 acid indigestion, 4 the symptoms referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43742-1317-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1317-1) </PackageDescription>
<NDC11Code>43742-1317-01</NDC11Code>
<ProductNDC>43742-1317</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neuro</ProprietaryName>
<ProprietaryNameSuffix>I</ProprietaryNameSuffix>
<NonProprietaryName>Taraxacum Officinale, Hydrastis Canadensis, Melatonin, Dopamine Hydrochloride, L-dopa, Serotonin (hydrochloride)</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180727</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>TARAXACUM OFFICINALE; GOLDENSEAL; MELATONIN; DOPAMINE HYDROCHLORIDE; LEVODOPA; SEROTONIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3; 6; 6; 8; 8; 8</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> For the temporary relief of symptoms including. brain fatigue brain fog anxiety. poor concentration jet lag. mood swings stress travel sickness. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51662-1317-1</NDCCode>
<PackageDescription>500 mL in 1 CONTAINER (51662-1317-1) </PackageDescription>
<NDC11Code>51662-1317-01</NDC11Code>
<ProductNDC>51662-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>6% Hetastarch In 0.9% Sodium Chloride</ProprietaryName>
<NonProprietaryName>6% Hetastarch In 0.9% Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>BA740193</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>HETASTARCH</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Increased Intravascular Volume [PE], Osmotic Activity [MoA], Plasma Volume Expander [EPC], Starch [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>6% Hetastarch in 0.9% Sodium Chloride Injection is indicated in the treatment of hypovolemia when plasma volume expansion is desired. It is not a substitute for blood or plasma. The adjunctive use of 6% Hetastarch in 0.9% Sodium Chloride Injection in leukapheresis has also been shown to be safe and efficacious in improving the harvesting and increasing the yield of granulocytes by centrifugal means.</IndicationAndUsage>
<Description>6% Hetastarch in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution for intravenous administration. Each 100 mL contains: Hetastarch............................................................................ 6 g Sodium Chloride, USP........................................................ 0.9 g Water for Injection, USP..................................................... qs pH adjusted with Sodium Hydroxide, NF if necessary Concentration of Electrolytes (mEq/L): Sodium (Na+) 154, Chloride (Cl-) 154 (not including ions for pH adjustment). pH: 5.5 (3.5 to 7.0) Total osmolar concentration is 308 mOsmol/liter (calc). Hetastarch is a synthetic colloid derived from a waxy starch composed almost entirely of amylopectin. Hydroxyethyl ether groups are introduced into the glucose units of the starch, and the resultant material is hydrolyzed to yield a product with a molecular weight suitable for use as a plasma volume expander and erythrocyte sedimenting agent. The molar substitution is approximately 0.75 which means hetastarch has an average of approximately 75 hydroxyethyl groups for every 100 glucose units. The weight average molecular weight is approximately 670,000 with a range of 550,000 to 800,000 and with at least 80% of the polymers falling within the range of 20,000 to 2,500,000. Hydroxyethyl groups are attached by ether linkage primarily at C-2 of the glucose unit and to a lesser extent at C-3 and C-6. The polymer resembles glycogen, and the polymerized D-glucose units are joined primarily by α-1,4 linkages with occasional α-1,6 branching linkages. The degree of branching is approximately 1:20 which means that there is one 1-6 branch for every 20 glucose monomer units. The chemical name for hetastarch is hydroxyethyl starch. The structural formula is as follows. Amylopectin derivative in which R2, R3, and R6 are H or CH2CH2OH, or R6 is a branching point in the starch polymer connected through a 1-6 linkage to additional alpha-D-glucopyranosyl units. Hetastarch is an artificial colloid pharmacologically classified as a plasma volume expander; 0.9% Sodium Chloride Injection is a fluid and electrolyte replenisher. 6% Hetastarch in 0.9% Sodium Chloride Injection is a clear, pale yellow to amber solution. Exposure to prolonged adverse storage conditions may result in a change to a turbid deep brown or the formation of a crystalline precipitate. Do not use the solution if these conditions are evident. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>51672-1317-1</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (51672-1317-1) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>51672-1317-01</NDC11Code>
<ProductNDC>51672-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20041012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076753</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax.</Description>
</NDC>
<NDC>
<NDCCode>51672-1317-5</NDCCode>
<PackageDescription>5 g in 1 TUBE (51672-1317-5) </PackageDescription>
<NDC11Code>51672-1317-05</NDC11Code>
<ProductNDC>51672-1317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20041012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076753</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone dipropionate ointment (augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28H 37FO 7, a molecular weight of 504.6 and the following structural formula:. It is a white to creamy white, odorless powder insoluble in water; freely soluble in acetone and in chloroform; sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in an optimized vehicle of propylene glycol, propylene glycol stearate, white petrolatum, and white wax.</Description>
</NDC>
<NDC>
<NDCCode>36987-1001-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1001-3)</PackageDescription>
<NDC11Code>36987-1001-03</NDC11Code>
<ProductNDC>36987-1001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1002-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1002-3)</PackageDescription>
<NDC11Code>36987-1002-03</NDC11Code>
<ProductNDC>36987-1002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1003-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1003-3)</PackageDescription>
<NDC11Code>36987-1003-03</NDC11Code>
<ProductNDC>36987-1003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1004-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1004-3)</PackageDescription>
<NDC11Code>36987-1004-03</NDC11Code>
<ProductNDC>36987-1004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1005-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1005-3)</PackageDescription>
<NDC11Code>36987-1005-03</NDC11Code>
<ProductNDC>36987-1005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1006-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1006-3)</PackageDescription>
<NDC11Code>36987-1006-03</NDC11Code>
<ProductNDC>36987-1006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cattle Epithelium</ProprietaryName>
<NonProprietaryName>Cattle Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
</NDCList>