{
"NDC": [
{
"NDCCode": "38779-2442-6",
"PackageDescription": "1 g in 1 BOTTLE, GLASS (38779-2442-6) ",
"NDC11Code": "38779-2442-06",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "70518-2442-6",
"PackageDescription": "100 POUCH in 1 BOX (70518-2442-6) / 1 TABLET in 1 POUCH (70518-2442-7) ",
"NDC11Code": "70518-2442-06",
"ProductNDC": "70518-2442",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078203",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-( o-chlorophenyl)-1,3-dihydro-3-hydroxy-2 H-1,4-benzodiazepin-2-one:. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, magnesium stearate, microcrystalline cellulose, and polacrilin potassium."
},
{
"NDCCode": "71335-2442-6",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (71335-2442-6) ",
"NDC11Code": "71335-2442-06",
"ProductNDC": "71335-2442",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215630",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240715",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is. N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C 8H 15N 7O 2S 3and its molecular weight is 337.43. Its structural formula is:. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate (type-A), hypromellose, titanium dioxide, triacetin, talc and macrogol. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol."
},
{
"NDCCode": "38779-2442-3",
"PackageDescription": "5 g in 1 BOTTLE, GLASS (38779-2442-3) ",
"NDC11Code": "38779-2442-03",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "38779-2442-4",
"PackageDescription": "25 g in 1 JAR (38779-2442-4) ",
"NDC11Code": "38779-2442-04",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "38779-2442-5",
"PackageDescription": "100 g in 1 JAR (38779-2442-5) ",
"NDC11Code": "38779-2442-05",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "38779-2442-7",
"PackageDescription": "25000 g in 1 DRUM (38779-2442-7) ",
"NDC11Code": "38779-2442-07",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "38779-2442-8",
"PackageDescription": "500 g in 1 BOTTLE, GLASS (38779-2442-8) ",
"NDC11Code": "38779-2442-08",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "38779-2442-9",
"PackageDescription": "1000 g in 1 JAR (38779-2442-9) ",
"NDC11Code": "38779-2442-09",
"ProductNDC": "38779-2442",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080208",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-07-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "08-FEB-08"
},
{
"NDCCode": "0338-0062-30",
"PackageDescription": "30 BAG in 1 CARTON (0338-0062-30) / 250 mL in 1 BAG",
"NDC11Code": "00338-0062-30",
"ProductNDC": "0338-0062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0066-20",
"PackageDescription": "20 BAG in 1 CARTON (0338-0066-20) / 500 mL in 1 BAG",
"NDC11Code": "00338-0066-20",
"ProductNDC": "0338-0066",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0070-10",
"PackageDescription": "10 BAG in 1 CARTON (0338-0070-10) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0070-10",
"ProductNDC": "0338-0070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0070-12",
"PackageDescription": "12 BAG in 1 CARTON (0338-0070-12) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0070-12",
"ProductNDC": "0338-0070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0074-30",
"PackageDescription": "30 BAG in 1 CARTON (0338-0074-30) / 250 mL in 1 BAG",
"NDC11Code": "00338-0074-30",
"ProductNDC": "0338-0074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0078-20",
"PackageDescription": "20 BAG in 1 CARTON (0338-0078-20) / 500 mL in 1 BAG",
"NDC11Code": "00338-0078-20",
"ProductNDC": "0338-0078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0082-10",
"PackageDescription": "10 BAG in 1 CARTON (0338-0082-10) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0082-10",
"ProductNDC": "0338-0082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-0082-12",
"PackageDescription": "12 BAG in 1 CARTON (0338-0082-12) / 1000 mL in 1 BAG",
"NDC11Code": "00338-0082-12",
"ProductNDC": "0338-0082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260121",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-9649-75",
"PackageDescription": "75 BAG in 1 CARTON (0338-9649-75) / 50 mL in 1 BAG",
"NDC11Code": "00338-9649-75",
"ProductNDC": "0338-9649",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "2.5",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240809",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-9651-75",
"PackageDescription": "75 BAG in 1 CARTON (0338-9651-75) / 50 mL in 1 BAG",
"NDC11Code": "00338-9651-75",
"ProductNDC": "0338-9651",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "2.5",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240809",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-9653-60",
"PackageDescription": "60 BAG in 1 CARTON (0338-9653-60) / 100 mL in 1 BAG",
"NDC11Code": "00338-9653-60",
"ProductNDC": "0338-9653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240809",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "0338-9655-60",
"PackageDescription": "60 BAG in 1 CARTON (0338-9655-60) / 100 mL in 1 BAG",
"NDC11Code": "00338-9655-60",
"ProductNDC": "0338-9655",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19710304",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016673",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240809",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC."
},
{
"NDCCode": "22840-2442-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-2442-2) ",
"NDC11Code": "22840-2442-02",
"ProductNDC": "22840-2442",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Black Locust Blossom",
"NonProprietaryName": "Robinia Pseudoacacia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "ROBINIA PSEUDOACACIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "22840-2442-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-2442-4) ",
"NDC11Code": "22840-2442-04",
"ProductNDC": "22840-2442",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Black Locust Blossom",
"NonProprietaryName": "Robinia Pseudoacacia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "ROBINIA PSEUDOACACIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "55714-2442-1",
"PackageDescription": "30 mL in 1 BOTTLE, GLASS (55714-2442-1) ",
"NDC11Code": "55714-2442-01",
"ProductNDC": "55714-2442",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Flu Care",
"NonProprietaryName": "Influenza A Virus, Influenza B Virus, Histaminum Hydrochloricum, Aconitum Nap., Aralia Quinquefolia, Arsenicum Alb., Baptisia, Bryonia, Cinchona, Eupatorium Perf., Gelsemium, Ipecac., Kali Carb., Nux Vom., Phosphorus, Rhus Toxicodendron, Echinacea",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20190131",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "ACONITUM NAPELLUS; AMERICAN GINSENG; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BRYONIA ALBA ROOT; CINCHONA OFFICINALIS BARK; ECHINACEA, UNSPECIFIED; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; HISTAMINE DIHYDROCHLORIDE; INFLUENZA A VIRUS; INFLUENZA B VIRUS; IPECAC; PHOSPHORUS; POTASSIUM CARBONATE; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF",
"StrengthNumber": "10; 10; 15; 10; 10; 10; 6; 10; 10; 15; 30; 30; 10; 10; 10; 15; 10",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190131",
"SamplePackage": "N",
"IndicationAndUsage": "Formulated for symptoms associated with colds and flu such as aches, discomfort, fatigue, labored breathing, vomiting, cramping and other related symptoms."
},
{
"NDCCode": "63020-715-10",
"PackageDescription": "1 KIT in 1 CARTON (63020-715-10) * 9.5 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (63020-710-10) * .6 mL in 1 SYRINGE (63020-600-05) ",
"NDC11Code": "63020-0715-10",
"ProductNDC": "63020-715",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mimrylo",
"NonProprietaryName": "Rusfertide",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220605",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260828",
"SamplePackage": "N",
"IndicationAndUsage": "MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).",
"Description": "MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles."
},
{
"NDCCode": "63020-725-20",
"PackageDescription": "1 KIT in 1 CARTON (63020-725-20) * 19 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-720-20) * .6 mL in 1 SYRINGE (63020-600-05) ",
"NDC11Code": "63020-0725-20",
"ProductNDC": "63020-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mimrylo",
"NonProprietaryName": "Rusfertide",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220605",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260828",
"SamplePackage": "N",
"IndicationAndUsage": "MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).",
"Description": "MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles."
},
{
"NDCCode": "63020-735-30",
"PackageDescription": "1 KIT in 1 CARTON (63020-735-30) * 28 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-730-30) * .6 mL in 1 SYRINGE (63020-600-05) ",
"NDC11Code": "63020-0735-30",
"ProductNDC": "63020-735",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mimrylo",
"NonProprietaryName": "Rusfertide",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220605",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260828",
"SamplePackage": "N",
"IndicationAndUsage": "MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).",
"Description": "MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles."
},
{
"NDCCode": "63020-745-40",
"PackageDescription": "1 KIT in 1 CARTON (63020-745-40) * 41 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-740-40) * .6 mL in 1 SYRINGE (63020-600-05) ",
"NDC11Code": "63020-0745-40",
"ProductNDC": "63020-745",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mimrylo",
"NonProprietaryName": "Rusfertide",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220605",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260828",
"SamplePackage": "N",
"IndicationAndUsage": "MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).",
"Description": "MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles."
},
{
"NDCCode": "63020-765-60",
"PackageDescription": "1 KIT in 1 CARTON (63020-765-60) * 54 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-760-60) * .6 mL in 1 SYRINGE (63020-600-05) ",
"NDC11Code": "63020-0765-60",
"ProductNDC": "63020-765",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mimrylo",
"NonProprietaryName": "Rusfertide",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220605",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260828",
"SamplePackage": "N",
"IndicationAndUsage": "MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).",
"Description": "MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles."
},
{
"NDCCode": "68071-2442-3",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (68071-2442-3) ",
"NDC11Code": "68071-2442-03",
"ProductNDC": "68071-2442",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210608",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: . Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>38779-2442-6</NDCCode>
<PackageDescription>1 g in 1 BOTTLE, GLASS (38779-2442-6) </PackageDescription>
<NDC11Code>38779-2442-06</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70518-2442-6</NDCCode>
<PackageDescription>100 POUCH in 1 BOX (70518-2442-6) / 1 TABLET in 1 POUCH (70518-2442-7) </PackageDescription>
<NDC11Code>70518-2442-06</NDC11Code>
<ProductNDC>70518-2442</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078203</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-( o-chlorophenyl)-1,3-dihydro-3-hydroxy-2 H-1,4-benzodiazepin-2-one:. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, magnesium stearate, microcrystalline cellulose, and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>71335-2442-6</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (71335-2442-6) </PackageDescription>
<NDC11Code>71335-2442-06</NDC11Code>
<ProductNDC>71335-2442</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215630</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is. N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C 8H 15N 7O 2S 3and its molecular weight is 337.43. Its structural formula is:. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate (type-A), hypromellose, titanium dioxide, triacetin, talc and macrogol. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>38779-2442-3</NDCCode>
<PackageDescription>5 g in 1 BOTTLE, GLASS (38779-2442-3) </PackageDescription>
<NDC11Code>38779-2442-03</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>38779-2442-4</NDCCode>
<PackageDescription>25 g in 1 JAR (38779-2442-4) </PackageDescription>
<NDC11Code>38779-2442-04</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>38779-2442-5</NDCCode>
<PackageDescription>100 g in 1 JAR (38779-2442-5) </PackageDescription>
<NDC11Code>38779-2442-05</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>38779-2442-7</NDCCode>
<PackageDescription>25000 g in 1 DRUM (38779-2442-7) </PackageDescription>
<NDC11Code>38779-2442-07</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>38779-2442-8</NDCCode>
<PackageDescription>500 g in 1 BOTTLE, GLASS (38779-2442-8) </PackageDescription>
<NDC11Code>38779-2442-08</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>38779-2442-9</NDCCode>
<PackageDescription>1000 g in 1 JAR (38779-2442-9) </PackageDescription>
<NDC11Code>38779-2442-09</NDC11Code>
<ProductNDC>38779-2442</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-08</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0338-0062-30</NDCCode>
<PackageDescription>30 BAG in 1 CARTON (0338-0062-30) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0062-30</NDC11Code>
<ProductNDC>0338-0062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0066-20</NDCCode>
<PackageDescription>20 BAG in 1 CARTON (0338-0066-20) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0066-20</NDC11Code>
<ProductNDC>0338-0066</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0070-10</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (0338-0070-10) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0070-10</NDC11Code>
<ProductNDC>0338-0070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0070-12</NDCCode>
<PackageDescription>12 BAG in 1 CARTON (0338-0070-12) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0070-12</NDC11Code>
<ProductNDC>0338-0070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0074-30</NDCCode>
<PackageDescription>30 BAG in 1 CARTON (0338-0074-30) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0074-30</NDC11Code>
<ProductNDC>0338-0074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0078-20</NDCCode>
<PackageDescription>20 BAG in 1 CARTON (0338-0078-20) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0078-20</NDC11Code>
<ProductNDC>0338-0078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0082-10</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (0338-0082-10) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0082-10</NDC11Code>
<ProductNDC>0338-0082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-0082-12</NDCCode>
<PackageDescription>12 BAG in 1 CARTON (0338-0082-12) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-0082-12</NDC11Code>
<ProductNDC>0338-0082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-9649-75</NDCCode>
<PackageDescription>75 BAG in 1 CARTON (0338-9649-75) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9649-75</NDC11Code>
<ProductNDC>0338-9649</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-9651-75</NDCCode>
<PackageDescription>75 BAG in 1 CARTON (0338-9651-75) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9651-75</NDC11Code>
<ProductNDC>0338-9651</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-9653-60</NDCCode>
<PackageDescription>60 BAG in 1 CARTON (0338-9653-60) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9653-60</NDC11Code>
<ProductNDC>0338-9653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>0338-9655-60</NDCCode>
<PackageDescription>60 BAG in 1 CARTON (0338-9655-60) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9655-60</NDC11Code>
<ProductNDC>0338-9655</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19710304</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016673</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC.</Description>
</NDC>
<NDC>
<NDCCode>22840-2442-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-2442-2) </PackageDescription>
<NDC11Code>22840-2442-02</NDC11Code>
<ProductNDC>22840-2442</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Black Locust Blossom</ProprietaryName>
<NonProprietaryName>Robinia Pseudoacacia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>ROBINIA PSEUDOACACIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>22840-2442-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-2442-4) </PackageDescription>
<NDC11Code>22840-2442-04</NDC11Code>
<ProductNDC>22840-2442</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Black Locust Blossom</ProprietaryName>
<NonProprietaryName>Robinia Pseudoacacia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>ROBINIA PSEUDOACACIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>55714-2442-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, GLASS (55714-2442-1) </PackageDescription>
<NDC11Code>55714-2442-01</NDC11Code>
<ProductNDC>55714-2442</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Flu Care</ProprietaryName>
<NonProprietaryName>Influenza A Virus, Influenza B Virus, Histaminum Hydrochloricum, Aconitum Nap., Aralia Quinquefolia, Arsenicum Alb., Baptisia, Bryonia, Cinchona, Eupatorium Perf., Gelsemium, Ipecac., Kali Carb., Nux Vom., Phosphorus, Rhus Toxicodendron, Echinacea</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190131</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>ACONITUM NAPELLUS; AMERICAN GINSENG; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BRYONIA ALBA ROOT; CINCHONA OFFICINALIS BARK; ECHINACEA, UNSPECIFIED; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; HISTAMINE DIHYDROCHLORIDE; INFLUENZA A VIRUS; INFLUENZA B VIRUS; IPECAC; PHOSPHORUS; POTASSIUM CARBONATE; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF</SubstanceName>
<StrengthNumber>10; 10; 15; 10; 10; 10; 6; 10; 10; 15; 30; 30; 10; 10; 10; 15; 10</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Formulated for symptoms associated with colds and flu such as aches, discomfort, fatigue, labored breathing, vomiting, cramping and other related symptoms.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63020-715-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63020-715-10) * 9.5 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (63020-710-10) * .6 mL in 1 SYRINGE (63020-600-05) </PackageDescription>
<NDC11Code>63020-0715-10</NDC11Code>
<ProductNDC>63020-715</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mimrylo</ProprietaryName>
<NonProprietaryName>Rusfertide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220605</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).</IndicationAndUsage>
<Description>MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles.</Description>
</NDC>
<NDC>
<NDCCode>63020-725-20</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63020-725-20) * 19 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-720-20) * .6 mL in 1 SYRINGE (63020-600-05) </PackageDescription>
<NDC11Code>63020-0725-20</NDC11Code>
<ProductNDC>63020-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mimrylo</ProprietaryName>
<NonProprietaryName>Rusfertide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220605</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).</IndicationAndUsage>
<Description>MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles.</Description>
</NDC>
<NDC>
<NDCCode>63020-735-30</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63020-735-30) * 28 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-730-30) * .6 mL in 1 SYRINGE (63020-600-05) </PackageDescription>
<NDC11Code>63020-0735-30</NDC11Code>
<ProductNDC>63020-735</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mimrylo</ProprietaryName>
<NonProprietaryName>Rusfertide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220605</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).</IndicationAndUsage>
<Description>MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles.</Description>
</NDC>
<NDC>
<NDCCode>63020-745-40</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63020-745-40) * 41 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-740-40) * .6 mL in 1 SYRINGE (63020-600-05) </PackageDescription>
<NDC11Code>63020-0745-40</NDC11Code>
<ProductNDC>63020-745</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mimrylo</ProprietaryName>
<NonProprietaryName>Rusfertide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220605</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).</IndicationAndUsage>
<Description>MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles.</Description>
</NDC>
<NDC>
<NDCCode>63020-765-60</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63020-765-60) * 54 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63020-760-60) * .6 mL in 1 SYRINGE (63020-600-05) </PackageDescription>
<NDC11Code>63020-0765-60</NDC11Code>
<ProductNDC>63020-765</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mimrylo</ProprietaryName>
<NonProprietaryName>Rusfertide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220605</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MIMRYLO is indicated for the treatment of erythrocytosis in adults with polycythemia vera (PV).</IndicationAndUsage>
<Description>MIMRYLO (rusfertide) for injection, for subcutaneous use, a hepcidin mimetic, is a synthetic cyclic peptide (disulfide) isolated as an acetate salt. The chemical name for rusfertide is S6,S16-cyclo[N-isovaleryl-Asp-Thr-His-Phe-Pro-Cys-Ile-Nε-(N-palmitoyl-γ-Glu)-Lys-Phe-Glu-Pro-Arg-Ser-Lys-Gly-Cys-Lys-NH2] acetate. Rusfertide acetate has the following chemical structure. Rusfertide acetate is an amorphous white to off-white powder, light sensitive and hygroscopic with low solubility in ethanol or acetonitrile. The aqueous solubility in pH range of 2.5 to 7.4 is ≥112 mg/mL. The average molecular weight for the free base is 2442.0 u. The molecular formula for the free base is C114H181N27O28S2. MIMRYLO for injection is supplied as a sterile, preservative-free, white to off-white lyophilized powder in a single-dose glass vial. The 9.5 mg dose strength delivers 9.5 mg of rusfertide (provided as rusfertide acetate), mannitol (25 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The 19 mg, 28 mg, 41 mg, and 54 mg dose strengths deliver 19 mg, 28 mg, 41 mg and 54 mg of rusfertide (provided as rusfertide acetate), mannitol (20 mg), sodium acetate trihydrate (1.36 mg), and glacial acetic acid/sodium hydroxide for pH adjustment, for subcutaneous injection after reconstitution with the provided diluent. The diluent for MIMRYLO is a sterile, preservative-free solution containing sodium acetate trihydrate (1.36 mg/mL), zinc acetate dihydrate (2.2 mg/mL), and glacial acetic acid for adjusting the pH to nominal pH of 5.4 in Water for Injection, USP. It is a clear, colorless solution, free from visible particles, and is provided in a glass prefilled syringe. After reconstitution, MIMRYLO is a clear and colorless solution free from visible particles.</Description>
</NDC>
<NDC>
<NDCCode>68071-2442-3</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (68071-2442-3) </PackageDescription>
<NDC11Code>68071-2442-03</NDC11Code>
<ProductNDC>68071-2442</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: . Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
</NDCList>