{
"NDC": [
{
"NDCCode": "39822-0412-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0412-1) / 30 mL in 1 VIAL",
"NDC11Code": "39822-0412-01",
"ProductNDC": "39822-0412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065013",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "1.2",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010817",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. - Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. - Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). - Serious central-nervous-system infections (meningitis) caused by susceptible organisms. - Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. - Skin, bone, and skin-structure infections caused by P. aeruginosa,Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. - Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin for injection, USP is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of sterile water for injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D- ribo-hexopyranosyl-(1→6)-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18H 37N 5O 9) 25H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package)."
},
{
"NDCCode": "39822-0412-6",
"PackageDescription": "6 VIAL in 1 CARTON (39822-0412-6) / 30 mL in 1 VIAL",
"NDC11Code": "39822-0412-06",
"ProductNDC": "39822-0412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065013",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "1.2",
"StrengthUnit": "g/30mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010817",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. - Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. - Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). - Serious central-nervous-system infections (meningitis) caused by susceptible organisms. - Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. - Skin, bone, and skin-structure infections caused by P. aeruginosa,Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. - Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin for injection, USP is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of sterile water for injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D- ribo-hexopyranosyl-(1→6)-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18H 37N 5O 9) 25H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package)."
},
{
"NDCCode": "39822-0000-0",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0000-0) ",
"NDC11Code": "39822-0000-00",
"ProductNDC": "39822-0000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207848",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "12; 1.5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180213",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0123-1",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0123-1) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE",
"NDC11Code": "39822-0123-01",
"ProductNDC": "39822-0123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "39822-0123-2",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) ",
"NDC11Code": "39822-0123-02",
"ProductNDC": "39822-0123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0125-3",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0125-3) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE",
"NDC11Code": "39822-0125-03",
"ProductNDC": "39822-0125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "3; .375",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "39822-0125-4",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0125-4) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0125-3) ",
"NDC11Code": "39822-0125-04",
"ProductNDC": "39822-0125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "3; .375",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0127-5",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0127-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE",
"NDC11Code": "39822-0127-05",
"ProductNDC": "39822-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "39822-0127-6",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0127-6) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0127-5) ",
"NDC11Code": "39822-0127-06",
"ProductNDC": "39822-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0138-0",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0138-0) ",
"NDC11Code": "39822-0138-00",
"ProductNDC": "39822-0138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207848",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "12; 1.5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180213",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0139-7",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0139-7) ",
"NDC11Code": "39822-0139-07",
"ProductNDC": "39822-0139",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207848",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "36; 4.5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180212",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0151-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0151-1) / 1 mL in 1 VIAL",
"NDC11Code": "39822-0151-01",
"ProductNDC": "39822-0151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Liothyronine Sodium",
"NonProprietaryName": "Liothyronine Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076923",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LIOTHYRONINE SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Triiodothyronine [CS], l-Triiodothyronine [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050817",
"SamplePackage": "N",
"IndicationAndUsage": "Liothyronine sodium injection (T 3) is indicated in the treatment of myxedema coma/precoma. Liothyronine sodium injection (T 3) can be used in patients allergic to desiccated thyroid or thyroid extract derived from pork or beef.",
"Description": "Thyroid hormone drugs are natural or synthetic preparations containing tetraiodothyronine (T 4, levothyroxine) sodium or triiodothyronine (T 3, liothyronine) sodium or both. T 4 and T 3 are produced in the human thyroid gland by the iodination and coupling of the amino acid tyrosine. T 4 contains four iodine atoms and is formed by the coupling of two molecules of diiodotyrosine (DIT). T 3 contains three atoms of iodine and is formed by the coupling of one molecule of DIT with one molecule of monoiodotyrosine (MIT). Both hormones are stored in the thyroid colloid as thyroglobulin and released into the circulation. The major source of T 3 has been shown to be peripheral deiodination of T 4. T 3 is bound less firmly than T 4 in the serum, enters peripheral tissues more readily, and binds to specific nuclear receptor(s) to initiate hormonal, metabolic effects. T 4 is the prohormone which is deiodinated to T 3 for hormone activity. Thyroid hormone preparations belong to two categories: (1) natural hormonal preparations derived from animal thyroid, and (2) synthetic preparations. Natural preparations include desiccated thyroid and thyroglobulin. Desiccated thyroid is derived from domesticated animals that are used for food by man (either beef or hog thyroid), and thyroglobulin is derived from thyroid glands of the hog. Liothyronine sodium injection (T 3) contains liothyronine (L-triiodothyronine or L-T 3), a synthetic form of a natural thyroid hormone, as the sodium salt. The structural and empirical formulas and molecular weight of liothyronine sodium are given below. In euthyroid patients, 25 mcg of liothyronine is equivalent to approximately 1 grain of desiccated thyroid or thyroglobulin and 0.1 mg of L-thyroxine. Each mL of liothyronine sodium injection (T 3) in amber glass vials contains, in sterile non-pyrogenic aqueous solution, liothyronine sodium equivalent to 10 mcg of liothyronine; alcohol, 6.8% by volume; anhydrous citric acid, 0.175 mg; ammonia, 2.19 mg, as ammonium hydroxide; Water for Injection, USP."
},
{
"NDCCode": "39822-0166-5",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0166-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0166-05",
"ProductNDC": "39822-0166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "19940930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063000",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19940930",
"SamplePackage": "N",
"IndicationAndUsage": "Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable."
},
{
"NDCCode": "39822-0166-7",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0166-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0166-07",
"ProductNDC": "39822-0166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "19940930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063000",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19940930",
"SamplePackage": "N",
"IndicationAndUsage": "Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable."
},
{
"NDCCode": "39822-0170-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)",
"NDC11Code": "39822-0170-02",
"ProductNDC": "39822-0170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "20140115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC],Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0171-7",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0171-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0171-6)",
"NDC11Code": "39822-0171-07",
"ProductNDC": "39822-0171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140425",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC],Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0190-1",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (39822-0190-1) / 5 mL in 1 VIAL, GLASS",
"NDC11Code": "39822-0190-01",
"ProductNDC": "39822-0190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040784",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090301",
"SamplePackage": "N",
"IndicationAndUsage": "For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure.",
"Description": "Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1,3,4-thiadiazol-2-yl)-acetamide and has the following structural formula:. Acetazolamide for injection, USP is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide and, if necessary, hydrochloric acid prior to lyophilization."
},
{
"NDCCode": "39822-0190-7",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (39822-0190-7) > 5 mL in 1 VIAL, GLASS",
"NDC11Code": "39822-0190-07",
"ProductNDC": "39822-0190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040784",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20140801",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0191-9",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0191-9) > 5 mL in 1 VIAL",
"NDC11Code": "39822-0191-09",
"ProductNDC": "39822-0191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040784",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0205-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (39822-0205-1) > 100 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
"NDC11Code": "39822-0205-01",
"ProductNDC": "39822-0205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pancrelipase",
"NonProprietaryName": "Pancrelipase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090922",
"EndMarketingDate": "20180331",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA022210",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "5000; 17000; 27000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Deprecated",
"LastUpdate": "2018-04-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "39822-0250-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0250-1) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-0250-01",
"ProductNDC": "39822-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211757",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231219",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "39822-0255-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0255-1) / 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-0255-01",
"ProductNDC": "39822-0255",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211757",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231219",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "39822-0260-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0260-1) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-0260-01",
"ProductNDC": "39822-0260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20231219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211757",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231219",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol."
},
{
"NDCCode": "39822-0277-5",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) ",
"NDC11Code": "39822-0277-05",
"ProductNDC": "39822-0277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baciim",
"NonProprietaryName": "Bacitracin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19970509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064153",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "BACITRACIN",
"StrengthNumber": "50000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Decreased Cell Wall Synthesis & Repair [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19970509",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0278-1",
"PackageDescription": "10 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (39822-0278-1)",
"NDC11Code": "39822-0278-01",
"ProductNDC": "39822-0278",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bacitracin",
"NonProprietaryName": "Bacitracin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20151008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203177",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "BACITRACIN",
"StrengthNumber": "50000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Decreased Cell Wall Synthesis & Repair [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-02-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "39822-0310-5",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (39822-0310-5) / 1 TABLET in 1 BLISTER PACK (39822-0310-7) ",
"NDC11Code": "39822-0310-05",
"ProductNDC": "39822-0310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin Sulfate",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065220",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20100312",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Neomycin Sulfate Tablets, USP and other antibacterial drugs, Neomycin Sulfate Tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Neomycin Sulfate Tablets, USP, for oral administration, contain neomycin which is an antibiotic obtained from the metabolic products of the actinomycete Streptomycesfradiae. Structurally, neomycin sulfate may be represented as follows. Chemically, it is O-2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→3)- O-β-D-ribofuranosyl-(1→5)- O-[2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→4)]-2-deoxy-D-streptamine. Neomycin B is identical except that the α-D-glucopyranosyl residue in the neobiosamine moiety is β-L-idopyranosyl. Inactive Ingredients: Calcium Stearate, Povidone."
},
{
"NDCCode": "39822-0330-2",
"PackageDescription": "59 mL in 1 BOTTLE (39822-0330-2)",
"NDC11Code": "39822-0330-02",
"ProductNDC": "39822-0330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neo-fradin",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20020523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065010",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "87.5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "39822-0330-5",
"PackageDescription": "473 mL in 1 BOTTLE (39822-0330-5)",
"NDC11Code": "39822-0330-05",
"ProductNDC": "39822-0330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neo-fradin",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20020523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065010",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "87.5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "39822-0350-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) ",
"NDC11Code": "39822-0350-02",
"ProductNDC": "39822-0350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lincomycin",
"NonProprietaryName": "Lincomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL",
"StartMarketingDate": "20150705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201746",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LINCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2022-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150705",
"SamplePackage": "N",
"IndicationAndUsage": "Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP)."
},
{
"NDCCode": "39822-0353-6",
"PackageDescription": "10 mL in 1 VIAL (39822-0353-6) ",
"NDC11Code": "39822-0353-06",
"ProductNDC": "39822-0353",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lincomycin",
"NonProprietaryName": "Lincomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL",
"StartMarketingDate": "20150705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201746",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LINCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2022-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150705",
"SamplePackage": "N",
"IndicationAndUsage": "Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>39822-0412-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0412-1) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0412-01</NDC11Code>
<ProductNDC>39822-0412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065013</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. - Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. - Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). - Serious central-nervous-system infections (meningitis) caused by susceptible organisms. - Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. - Skin, bone, and skin-structure infections caused by P. aeruginosa,Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. - Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin for injection, USP is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of sterile water for injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D- ribo-hexopyranosyl-(1→6)-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18H 37N 5O 9) 25H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package).</Description>
</NDC>
<NDC>
<NDCCode>39822-0412-6</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (39822-0412-6) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0412-06</NDC11Code>
<ProductNDC>39822-0412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065013</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. - Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiella sp. - Lower respiratory tract infections caused by P. aeruginosa, Klebsiella sp, Enterobacter sp, Serratia sp, E. coli, and S. aureus (penicillinase and non-penicillinase-producing strains). - Serious central-nervous-system infections (meningitis) caused by susceptible organisms. - Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella sp, and Enterobacter sp. - Skin, bone, and skin-structure infections caused by P. aeruginosa,Proteus sp, E. coli, Klebsiella sp, Enterobacter sp, and S. aureus. - Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteus sp (indole-positive and indole-negative), E. coli, Klebsiella sp, Enterobacter sp, Serratia sp, S. aureus, Providencia sp, and Citrobacter sp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin for injection, USP is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of sterile water for injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D- ribo-hexopyranosyl-(1→6)-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18H 37N 5O 9) 25H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package).</Description>
</NDC>
<NDC>
<NDCCode>39822-0000-0</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0000-0) </PackageDescription>
<NDC11Code>39822-0000-00</NDC11Code>
<ProductNDC>39822-0000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207848</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>12; 1.5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0123-1</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0123-1) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>39822-0123-01</NDC11Code>
<ProductNDC>39822-0123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0123-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) </PackageDescription>
<NDC11Code>39822-0123-02</NDC11Code>
<ProductNDC>39822-0123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0125-3</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0125-3) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>39822-0125-03</NDC11Code>
<ProductNDC>39822-0125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>3; .375</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0125-4</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0125-4) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0125-3) </PackageDescription>
<NDC11Code>39822-0125-04</NDC11Code>
<ProductNDC>39822-0125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>3; .375</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0127-5</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0127-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>39822-0127-05</NDC11Code>
<ProductNDC>39822-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0127-6</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0127-6) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0127-5) </PackageDescription>
<NDC11Code>39822-0127-06</NDC11Code>
<ProductNDC>39822-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0138-0</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0138-0) </PackageDescription>
<NDC11Code>39822-0138-00</NDC11Code>
<ProductNDC>39822-0138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207848</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>12; 1.5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0139-7</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0139-7) </PackageDescription>
<NDC11Code>39822-0139-07</NDC11Code>
<ProductNDC>39822-0139</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207848</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>36; 4.5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0151-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0151-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0151-01</NDC11Code>
<ProductNDC>39822-0151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Liothyronine Sodium</ProprietaryName>
<NonProprietaryName>Liothyronine Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076923</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LIOTHYRONINE SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Triiodothyronine [CS], l-Triiodothyronine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Liothyronine sodium injection (T 3) is indicated in the treatment of myxedema coma/precoma. Liothyronine sodium injection (T 3) can be used in patients allergic to desiccated thyroid or thyroid extract derived from pork or beef.</IndicationAndUsage>
<Description>Thyroid hormone drugs are natural or synthetic preparations containing tetraiodothyronine (T 4, levothyroxine) sodium or triiodothyronine (T 3, liothyronine) sodium or both. T 4 and T 3 are produced in the human thyroid gland by the iodination and coupling of the amino acid tyrosine. T 4 contains four iodine atoms and is formed by the coupling of two molecules of diiodotyrosine (DIT). T 3 contains three atoms of iodine and is formed by the coupling of one molecule of DIT with one molecule of monoiodotyrosine (MIT). Both hormones are stored in the thyroid colloid as thyroglobulin and released into the circulation. The major source of T 3 has been shown to be peripheral deiodination of T 4. T 3 is bound less firmly than T 4 in the serum, enters peripheral tissues more readily, and binds to specific nuclear receptor(s) to initiate hormonal, metabolic effects. T 4 is the prohormone which is deiodinated to T 3 for hormone activity. Thyroid hormone preparations belong to two categories: (1) natural hormonal preparations derived from animal thyroid, and (2) synthetic preparations. Natural preparations include desiccated thyroid and thyroglobulin. Desiccated thyroid is derived from domesticated animals that are used for food by man (either beef or hog thyroid), and thyroglobulin is derived from thyroid glands of the hog. Liothyronine sodium injection (T 3) contains liothyronine (L-triiodothyronine or L-T 3), a synthetic form of a natural thyroid hormone, as the sodium salt. The structural and empirical formulas and molecular weight of liothyronine sodium are given below. In euthyroid patients, 25 mcg of liothyronine is equivalent to approximately 1 grain of desiccated thyroid or thyroglobulin and 0.1 mg of L-thyroxine. Each mL of liothyronine sodium injection (T 3) in amber glass vials contains, in sterile non-pyrogenic aqueous solution, liothyronine sodium equivalent to 10 mcg of liothyronine; alcohol, 6.8% by volume; anhydrous citric acid, 0.175 mg; ammonia, 2.19 mg, as ammonium hydroxide; Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>39822-0166-5</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0166-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0166-05</NDC11Code>
<ProductNDC>39822-0166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>19940930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063000</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19940930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable.</Description>
</NDC>
<NDC>
<NDCCode>39822-0166-7</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0166-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0166-07</NDC11Code>
<ProductNDC>39822-0166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>19940930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063000</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19940930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable.</Description>
</NDC>
<NDC>
<NDCCode>39822-0170-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)</PackageDescription>
<NDC11Code>39822-0170-02</NDC11Code>
<ProductNDC>39822-0170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>20140115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0171-7</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0171-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0171-6)</PackageDescription>
<NDC11Code>39822-0171-07</NDC11Code>
<ProductNDC>39822-0171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140425</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0190-1</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (39822-0190-1) / 5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>39822-0190-01</NDC11Code>
<ProductNDC>39822-0190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040784</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure.</IndicationAndUsage>
<Description>Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1,3,4-thiadiazol-2-yl)-acetamide and has the following structural formula:. Acetazolamide for injection, USP is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide and, if necessary, hydrochloric acid prior to lyophilization.</Description>
</NDC>
<NDC>
<NDCCode>39822-0190-7</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (39822-0190-7) > 5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>39822-0190-07</NDC11Code>
<ProductNDC>39822-0190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040784</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0191-9</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0191-9) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0191-09</NDC11Code>
<ProductNDC>39822-0191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040784</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0205-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (39822-0205-1) > 100 CAPSULE, DELAYED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>39822-0205-01</NDC11Code>
<ProductNDC>39822-0205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pancrelipase</ProprietaryName>
<NonProprietaryName>Pancrelipase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090922</StartMarketingDate>
<EndMarketingDate>20180331</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA022210</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>5000; 17000; 27000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-04-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0250-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0250-1) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-0250-01</NDC11Code>
<ProductNDC>39822-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211757</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-0255-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0255-1) / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-0255-01</NDC11Code>
<ProductNDC>39822-0255</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211757</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-0260-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-0260-1) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-0260-01</NDC11Code>
<ProductNDC>39822-0260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20231219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211757</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula of C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g and 2 g strength single dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-0277-5</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) </PackageDescription>
<NDC11Code>39822-0277-05</NDC11Code>
<ProductNDC>39822-0277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baciim</ProprietaryName>
<NonProprietaryName>Bacitracin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19970509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064153</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BACITRACIN</SubstanceName>
<StrengthNumber>50000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Synthesis & Repair [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0278-1</NDCCode>
<PackageDescription>10 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (39822-0278-1)</PackageDescription>
<NDC11Code>39822-0278-01</NDC11Code>
<ProductNDC>39822-0278</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bacitracin</ProprietaryName>
<NonProprietaryName>Bacitracin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20151008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203177</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BACITRACIN</SubstanceName>
<StrengthNumber>50000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Synthesis & Repair [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-02-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0310-5</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (39822-0310-5) / 1 TABLET in 1 BLISTER PACK (39822-0310-7) </PackageDescription>
<NDC11Code>39822-0310-05</NDC11Code>
<ProductNDC>39822-0310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin Sulfate</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065220</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Neomycin Sulfate Tablets, USP and other antibacterial drugs, Neomycin Sulfate Tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Neomycin Sulfate Tablets, USP, for oral administration, contain neomycin which is an antibiotic obtained from the metabolic products of the actinomycete Streptomycesfradiae. Structurally, neomycin sulfate may be represented as follows. Chemically, it is O-2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→3)- O-β-D-ribofuranosyl-(1→5)- O-[2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→4)]-2-deoxy-D-streptamine. Neomycin B is identical except that the α-D-glucopyranosyl residue in the neobiosamine moiety is β-L-idopyranosyl. Inactive Ingredients: Calcium Stearate, Povidone.</Description>
</NDC>
<NDC>
<NDCCode>39822-0330-2</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE (39822-0330-2)</PackageDescription>
<NDC11Code>39822-0330-02</NDC11Code>
<ProductNDC>39822-0330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neo-fradin</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065010</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>87.5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0330-5</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (39822-0330-5)</PackageDescription>
<NDC11Code>39822-0330-05</NDC11Code>
<ProductNDC>39822-0330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neo-fradin</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065010</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>87.5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0350-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) </PackageDescription>
<NDC11Code>39822-0350-02</NDC11Code>
<ProductNDC>39822-0350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lincomycin</ProprietaryName>
<NonProprietaryName>Lincomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL</RouteName>
<StartMarketingDate>20150705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201746</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
</NDC>
<NDC>
<NDCCode>39822-0353-6</NDCCode>
<PackageDescription>10 mL in 1 VIAL (39822-0353-6) </PackageDescription>
<NDC11Code>39822-0353-06</NDC11Code>
<ProductNDC>39822-0353</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lincomycin</ProprietaryName>
<NonProprietaryName>Lincomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL</RouteName>
<StartMarketingDate>20150705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201746</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
</NDC>
</NDCList>