{
"NDC": [
{
"NDCCode": "39822-1030-2",
"PackageDescription": "3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) ",
"NDC11Code": "39822-1030-02",
"ProductNDC": "39822-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen Lysine",
"NonProprietaryName": "Ibuprofen Lysine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202402",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "IBUPROFEN LYSINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160408",
"SamplePackage": "N",
"IndicationAndUsage": "Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.",
"Description": "Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol."
},
{
"NDCCode": "15440-1030-2",
"PackageDescription": "25 kg in 1 DRUM (15440-1030-2)",
"NDC11Code": "15440-1030-02",
"ProductNDC": "15440-1030",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Tetrahydrozoline Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150523",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Zhejiang Excel Pharmaceutical Co. Ltd",
"SubstanceName": "TETRAHYDROZOLINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "22201-1030-2",
"PackageDescription": "1 TUBE in 1 CARTON (22201-1030-2) > 50 mL in 1 TUBE (22201-1030-1) ",
"NDC11Code": "22201-1030-02",
"ProductNDC": "22201-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dr Frog Intensive Calming Sun Block",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180301",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Charmzone Co Ltd",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "3.65; 3.49",
"StrengthUnit": "g/50mL; g/50mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180301",
"SamplePackage": "N",
"Description": "Uses. [UV PROTECTION]. SPF50+/PA++++. Sun block with intensified UV defense, calming damaged skin from UV rays and external irritation. 1. Intensified UVA/UVB defense Intensified UV filter of SPF50+/PA++++ keeps skin healthy by further screening the UV rays. 2. Cooling formula with less irritation Nature-derived cooling ingredients such as centella asiatica, onion and kelp, calm irritated skin from external stimulation. 3.Soft clean skin barrier Forms soft and fresh skin barrier, without stickiness, keeping the skin moisty, even from long term outdoor activities of sun exposure. Directions. Take an appropriate amount and apply to the entire face along with your neck, especially to parts of which can be vulnerable to UV rays at the end of skin care routine or right before the point putting on the make-up."
},
{
"NDCCode": "22840-1030-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-1030-2) ",
"NDC11Code": "22840-1030-02",
"ProductNDC": "22840-1030",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Mosquito",
"NonProprietaryName": "Aedes Taeniorhynchus",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "AEDES TAENIORHYNCHUS",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-1030-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1030-2)",
"NDC11Code": "36987-1030-02",
"ProductNDC": "36987-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duck Feathers",
"NonProprietaryName": "Duck Feathers",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "ANAS PLATYRHYNCHOS FEATHER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Feather Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Feathers [CS],Allergens [CS],Increased IgG Production [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1030-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1030-2) ",
"NDC11Code": "37662-1030-02",
"ProductNDC": "37662-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Magnesia Sulphurica",
"NonProprietaryName": "Magnesia Sulphurica",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220722",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "12",
"StrengthUnit": "[hp_C]/1",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2022-07-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220722",
"SamplePackage": "N"
},
{
"NDCCode": "44224-1030-2",
"PackageDescription": "1 TUBE in 1 BOX (44224-1030-2) > 14 mL in 1 TUBE",
"NDC11Code": "44224-1030-02",
"ProductNDC": "44224-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "After Bite The Itch Eraser",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140902",
"EndMarketingDate": "20200930",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Tender Corporation",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141001",
"EndMarketingDatePackage": "20200930",
"SamplePackage": "N"
},
{
"NDCCode": "50184-1030-2",
"PackageDescription": "1 JAR in 1 BOX (50184-1030-2) > 9.1 g in 1 JAR (50184-1030-1)",
"NDC11Code": "50184-1030-02",
"ProductNDC": "50184-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Supernatural Airbrushed Canvas Broad Spectrum Spf 15 Sunscreen",
"ProprietaryNameSuffix": "Extra Rich",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "philosophy",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "882.7",
"StrengthUnit": "mg/9.1g",
"Status": "Deprecated",
"LastUpdate": "2018-12-28",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "53225-1030-2",
"PackageDescription": "1 POUCH in 1 BOX (53225-1030-2) > 3 PATCH in 1 POUCH > 8650 mg in 1 PATCH",
"NDC11Code": "53225-1030-02",
"ProductNDC": "53225-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Viva Patch",
"NonProprietaryName": "Camphor, Lidocaine, And Methyl Salicylate",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160831",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Terrain Pharmaceuticals",
"SubstanceName": "LIDOCAINE; CAMPHOR (NATURAL); METHYL SALICYLATE",
"StrengthNumber": "2.5; 2; 4",
"StrengthUnit": "mg/100mg; mg/100mg; mg/100mg",
"Status": "Deprecated",
"LastUpdate": "2019-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160831",
"SamplePackage": "N"
},
{
"NDCCode": "62795-1030-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (62795-1030-2) > 100 TABLET in 1 BOTTLE",
"NDC11Code": "62795-1030-02",
"ProductNDC": "62795-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "T Relief Arthritis",
"NonProprietaryName": "T Relief Arthritis",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Medinatura",
"SubstanceName": "ARNICA MONTANA ROOT; SUS SCROFA UMBILICAL CORD; BRYONIA ALBA ROOT; SOLANUM DULCAMARA TOP; SUS SCROFA EMBRYO; LEDUM PALUSTRE TWIG; RHODODENDRON AUREUM LEAF; TOXICODENDRON PUBESCENS LEAF; SANGUINARIA CANADENSIS ROOT; SULFUR; COMFREY ROOT; SUS SCROFA PLACENTA; SUS SCROFA CARTILAGE",
"StrengthNumber": "3; 6; 3; 2; 6; 6; 8; 4; 3; 6; 7; 6; 4",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "68745-1030-2",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (68745-1030-2) > 20 mL in 1 BOTTLE, PUMP",
"NDC11Code": "68745-1030-02",
"ProductNDC": "68745-1030",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mat Lumiere",
"ProprietaryNameSuffix": "Long-lasting Soft Matte Sunscreen Makeup Broad Spectrum Spf 15, 40 Beige",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120701",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CHANEL PARFUMS BEAUTE",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "1.8",
"StrengthUnit": "mL/30mL",
"Status": "Deprecated",
"LastUpdate": "2014-05-05"
},
{
"NDCCode": "69866-1030-2",
"PackageDescription": "1 POUCH in 1 BOX (69866-1030-2) > 2 CONTAINER in 1 POUCH > 1 IMPLANT in 1 CONTAINER",
"NDC11Code": "69866-1030-02",
"ProductNDC": "69866-1030",
"ProductTypeName": "CELLULAR THERAPY",
"ProprietaryName": "Maci",
"NonProprietaryName": "Autologous Cultured Chondrocytes",
"DosageFormName": "IMPLANT",
"RouteName": "INTRA-ARTICULAR",
"StartMarketingDate": "20170609",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125603",
"LabelerName": "Vericel Corporation",
"SubstanceName": "AUTOLOGOUS CULTURED CHONDROCYTES; PORK COLLAGEN",
"StrengthNumber": "15000000; 15",
"StrengthUnit": "1/1; cm2/1",
"Pharm_Classes": "Autologous Cultured Cell [EPC], Cells, Cultured, Autologous [EXT], Chondrocytes [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170609",
"SamplePackage": "N"
},
{
"NDCCode": "69866-1030-8",
"PackageDescription": "2 BAG in 1 BOX (69866-1030-8) / 1 BOTTLE, PLASTIC in 1 BAG (69866-1030-7) / 1 IMPLANT in 1 BOTTLE, PLASTIC (69866-1030-6) ",
"NDC11Code": "69866-1030-08",
"ProductNDC": "69866-1030",
"ProductTypeName": "CELLULAR THERAPY",
"ProprietaryName": "Maci",
"NonProprietaryName": "Autologous Cultured Chondrocytes",
"DosageFormName": "IMPLANT",
"RouteName": "INTRA-ARTICULAR",
"StartMarketingDate": "20170609",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125603",
"LabelerName": "Vericel Corporation",
"SubstanceName": "AUTOLOGOUS CULTURED CHONDROCYTES; PORK COLLAGEN",
"StrengthNumber": "15000000; 15",
"StrengthUnit": "1/1; cm2/1",
"Pharm_Classes": "Autologous Cultured Cell [EPC], Cells, Cultured, Autologous [EXT], Chondrocytes [CS]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170609",
"SamplePackage": "N",
"IndicationAndUsage": "MACI® (autologous cultured chondrocytes on porcine collagen membrane) is an autologous cellularized scaffold product indicated for the repair of single or multiple symptomatic, full-thickness cartilage defects of the knee with or without bone involvement in adults. Limitations of Use: 1 Effectiveness of MACI in joints other than the knee has not been established., 2 Safety and effectiveness of MACI in patients over the age of 55 years have not been established.",
"Description": "MACI, autologous cultured chondrocytes on porcine collagen membrane, is a cellular sheet that consists of autologous chondrocytes seeded on a 3 x 5 cm, resorbable porcine Type I/III collagen membrane, for implantation into cartilage defects of the knee. The active ingredients of MACI are the autologous cultured chondrocytes and porcine Type I/III collagen. The autologous chondrocytes are propagated in cell culture and are seeded on the collagen at a density of 500,000 to 1,000,000 cells per cm2. The final MACI implant contains at least 500,000 cells per cm2 and does not contain any preservative. The product manufacture also uses reagents derived from animal materials. The resorbable, Type I/III, collagen membrane, which is a component of MACI, is porcine-derived. Fetal bovine serum is a component in the culture medium used to propagate the autologous chondrocytes; therefore, trace quantities of bovine-derived proteins may be present in MACI. These animal-derived reagents are tested for viruses, retroviruses, bacteria, fungi, yeast, and mycoplasma before use. MACI may contain residual gentamicin because it is included during manufacture. Gentamicin is not included in the transport medium used to maintain product stability. Studies determined an average of 9.2 μg residual gentamicin per MACI implant. A final sterility test is initiated prior to shipping, but the result will not be available prior to implantation. Passing results from preliminary in-process microbial tests are required for release of MACI for shipping."
},
{
"NDCCode": "71335-1030-2",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (71335-1030-2) ",
"NDC11Code": "71335-1030-02",
"ProductNDC": "71335-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202389",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250129",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI) indicated for the: 1 treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older ( 1) , 2 treatment of generalized anxiety disorder (GAD) in adults ( 1) .",
"Description": "Escitalopram oxalate contains escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3(dimethyl-amino)propyl]-1-( p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula:. The molecular formula is C 20H 21FN 2O C 2H 2O 4and the molecular weight is 414.40. Escitalopram oxalate occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.38 mg, 12.75 mg, 25.50 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: croscarmellose sodium, microcrystalline cellulose, hypromellose, colloidal anhydrous silica, magnesium stearate and talc. The film coating contains hypromellose, titanium dioxide, and polyethylene glycol."
},
{
"NDCCode": "39822-0123-2",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) ",
"NDC11Code": "39822-0123-02",
"ProductNDC": "39822-0123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0170-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)",
"NDC11Code": "39822-0170-02",
"ProductNDC": "39822-0170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "20140115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC],Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0277-5",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) ",
"NDC11Code": "39822-0277-05",
"ProductNDC": "39822-0277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baciim",
"NonProprietaryName": "Bacitracin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19970509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064153",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "BACITRACIN",
"StrengthNumber": "50000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Decreased Cell Wall Synthesis & Repair [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19970509",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0330-2",
"PackageDescription": "59 mL in 1 BOTTLE (39822-0330-2)",
"NDC11Code": "39822-0330-02",
"ProductNDC": "39822-0330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neo-fradin",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20020523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065010",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "87.5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "39822-0350-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) ",
"NDC11Code": "39822-0350-02",
"ProductNDC": "39822-0350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lincomycin",
"NonProprietaryName": "Lincomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL",
"StartMarketingDate": "20150705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201746",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LINCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2022-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150705",
"SamplePackage": "N",
"IndicationAndUsage": "Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP)."
},
{
"NDCCode": "39822-0460-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0460-02",
"ProductNDC": "39822-0460",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0470-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0470-02",
"ProductNDC": "39822-0470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0615-2",
"PackageDescription": "12 CARTON in 1 CARTON (39822-0615-2) > 1 VIAL in 1 CARTON (39822-0615-1) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0615-02",
"ProductNDC": "39822-0615",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064216",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110101",
"SamplePackage": "N",
"IndicationAndUsage": "Colistimethate for Injection is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas Aeruginosa. Colistimethate for Injection may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection and other antibacterial drugs, Colistimethate for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Colistimethate for Injection USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C 58H 105N 16Na 5O 28S 5 and the structural formula is represented below:."
},
{
"NDCCode": "39822-0617-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0617-1) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0617-01",
"ProductNDC": "39822-0617",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205356",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "COLISTIMETHATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160701",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0617-2",
"PackageDescription": "12 VIAL in 1 CARTON (39822-0617-2) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0617-02",
"ProductNDC": "39822-0617",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205356",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "COLISTIMETHATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160701",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0706-2",
"PackageDescription": "10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) ",
"NDC11Code": "39822-0706-02",
"ProductNDC": "39822-0706",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Streptomycin",
"NonProprietaryName": "Streptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19980630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064210",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "STREPTOMYCIN SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980630",
"SamplePackage": "N",
"IndicationAndUsage": "Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin."
},
{
"NDCCode": "39822-1201-2",
"PackageDescription": "10 AMPULE in 1 CARTON (39822-1201-2) / 1 mL in 1 AMPULE (39822-1201-1) ",
"NDC11Code": "39822-1201-02",
"ProductNDC": "39822-1201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates",
"NonProprietaryName": "Neomycin And Polymyxin B Sulfates",
"DosageFormName": "SOLUTION",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20060119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065106",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "40; 200000",
"StrengthUnit": "mg/mL; [USP'U]/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060119",
"SamplePackage": "N",
"IndicationAndUsage": "Neomycin and Polymyxin B Sulfates Solution for Irrigation is indicated for short-term use (up to 10 days) as a continuous irrigant or rinse in the urinary bladder of abacteriuric patients to help prevent bacteriuria and gram-negative rod septicemia associated with the use of indwelling catheters. Since organisms gain entrance to the bladder by way of, through, and around the catheter, significant bacteriuria is induced by bacterial multiplication in the bladder urine, in the mucoid film often present between catheter and urethra, and in other sites. Urinary tract infection may result from the repeated presence in the urine of large numbers of pathogenic bacteria. The use of closed systems with indwelling catheters has been shown to reduce the risk of infection. A three-way closed catheter system with constant neomycin-polymyxin B bladder rinse is indicated to prevent the development of infection while using indwelling catheters. If uropathogens are isolated, they should be identified and tested for susceptibility so that appropriate antimicrobial therapy for systemic use can be initiated.",
"Description": "Neomycin and Polymyxin B Sulfates Solution for Irrigation is a concentrated sterile antibiotic solution to be diluted for urinary bladder irrigation. Each mL contains neomycin sulfate equivalent to 40 mg neomycin base, 200,000 units polymyxin B sulfate, and Water for Injection, inactive ingredient: sulfuric acid. The 20-mL multiple dose vial contains, in addition to the above, 1 mg methylparaben (0.1%) added as a preservative. Neomycin sulfate, an antibiotic of the aminoglycoside group, is the sulfate salt of neomycin B and C produced by Streptomyces fradiae. It has a potency equivalent to not less than 600 mcg of neomycin per mg. The structural formulae are:. Polymyxin B sulfate, a polypeptide antibiotic, is the sulfate salt of polymyxin B 1 and B 2 produced by the growth of Bacillus polymyxa. It has a potency of not less than 6,000 polymyxin B units per mg. The structural formulae are:."
},
{
"NDCCode": "39822-1800-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-1800-1) / 2 mL in 1 VIAL",
"NDC11Code": "39822-1800-01",
"ProductNDC": "39822-1800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20250828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211072",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250902",
"SamplePackage": "N",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH."
},
{
"NDCCode": "39822-2080-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-2080-01",
"ProductNDC": "39822-2080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eribulin Mesylate",
"NonProprietaryName": "Eribulin Mesylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219054",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ERIBULIN MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260407",
"SamplePackage": "N",
"Description": "Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment."
},
{
"NDCCode": "39822-2100-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) ",
"NDC11Code": "39822-2100-02",
"ProductNDC": "39822-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dactinomycin",
"NonProprietaryName": "Dactinomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203999",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "DACTINOMYCIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190731",
"SamplePackage": "N",
"IndicationAndUsage": "Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .",
"Description": "Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol."
},
{
"NDCCode": "39822-3030-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-3030-2) / 6 mL in 1 VIAL, SINGLE-DOSE (39822-3030-1) ",
"NDC11Code": "39822-3030-02",
"ProductNDC": "39822-3030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pentamidine Isethionate",
"NonProprietaryName": "Pentamidine Isethionate",
"DosageFormName": "INHALANT",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20230404",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206983",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PENTAMIDINE ISETHIONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/6mL",
"Pharm_Classes": "Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230404",
"SamplePackage": "N",
"IndicationAndUsage": "Pentamidine Isethionate is indicated for the prevention of Pneumocystis jiroveci pneumonia (PJP) in high-risk, HIV-infected patients defined by one or both of the following criteria:. i. a history of one or more episodes of PJP. ii. a peripheral CD4+ (T4 helper/inducer) lymphocyte count less than or equal to 200/mm 3. These indications are based on the results of an 18-month randomized, dose-response trial in high risk HIV-infected patients and on existing epidemiological data from natural history studies. The patient population of the controlled trial consisted of 408 patients, 237 of whom had a history of one or more episodes of PJP. The remaining patients without a history of PJP included 55 patients with Kaposi’s sarcoma and 116 patients with other AIDS diagnoses, ARC or asymptomatic HIV infection. Patients were randomly assigned to receive Pentamidine isethionate via the Respirgard ® II nebulizer at one of the following three doses: 30 mg every two weeks (n=135), 150 mg every two weeks (n=134) or 300 mg every four weeks (n=139). The results of the trial demonstrated a significant protective effect (p<0.01) against PJP with the 300 mg every four week dosage regimen compared to the 30 mg every two week dosage regimen. The 300 mg dose regimen reduced the risk of developing PJP by 50 to 70% compared to the 30 mg regimen. A total of 293 patients (72% of all patients) also received zidovudine at sometime during the trial. The analysis of the data demonstrated the efficacy of the 300 mg dose even after adjusting for the effect of zidovudine. The results of the trial further demonstrate that the dose and frequency of dosing are important to the efficacy of Pentamidine Isethionate prophylaxis in that multiple analyses consistently demonstrated a trend toward greater efficacy with 300 mg every four weeks as compared to 150 mg every two weeks. No dose-response was observed for reduction in overall mortality; however, mortality from PJP was low in all three dosage groups.",
"Description": "Pentamidine Isethionate for inhalation, an antifungal agent, is a nonpyrogenic lyophilized product. After reconstitution with Sterile Water for Injection, USP, Pentamidine Isethionate is administered by inhalation via the Respirgard ® II nebulizer [Marquest, Englewood, CO] (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate, 4,4’-[1,5-pentane-diylbis(oxy)]bis-benzenecarboximidamid, is a white crystalline powder soluble in water and glycerin and insoluble in ether, acetone, and chloroform. C 19H 24N 4O 22C 2H 6O 4S 592.68. Each vial contains 300 mg pentamidine isethionate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>39822-1030-2</NDCCode>
<PackageDescription>3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) </PackageDescription>
<NDC11Code>39822-1030-02</NDC11Code>
<ProductNDC>39822-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen Lysine</ProprietaryName>
<NonProprietaryName>Ibuprofen Lysine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202402</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>IBUPROFEN LYSINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.</IndicationAndUsage>
<Description>Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>15440-1030-2</NDCCode>
<PackageDescription>25 kg in 1 DRUM (15440-1030-2)</PackageDescription>
<NDC11Code>15440-1030-02</NDC11Code>
<ProductNDC>15440-1030</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Tetrahydrozoline Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150523</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Zhejiang Excel Pharmaceutical Co. Ltd</LabelerName>
<SubstanceName>TETRAHYDROZOLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>22201-1030-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (22201-1030-2) > 50 mL in 1 TUBE (22201-1030-1) </PackageDescription>
<NDC11Code>22201-1030-02</NDC11Code>
<ProductNDC>22201-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dr Frog Intensive Calming Sun Block</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Charmzone Co Ltd</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>3.65; 3.49</StrengthNumber>
<StrengthUnit>g/50mL; g/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Uses. [UV PROTECTION]. SPF50+/PA++++. Sun block with intensified UV defense, calming damaged skin from UV rays and external irritation. 1. Intensified UVA/UVB defense Intensified UV filter of SPF50+/PA++++ keeps skin healthy by further screening the UV rays. 2. Cooling formula with less irritation Nature-derived cooling ingredients such as centella asiatica, onion and kelp, calm irritated skin from external stimulation. 3.Soft clean skin barrier Forms soft and fresh skin barrier, without stickiness, keeping the skin moisty, even from long term outdoor activities of sun exposure. Directions. Take an appropriate amount and apply to the entire face along with your neck, especially to parts of which can be vulnerable to UV rays at the end of skin care routine or right before the point putting on the make-up.</Description>
</NDC>
<NDC>
<NDCCode>22840-1030-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1030-2) </PackageDescription>
<NDC11Code>22840-1030-02</NDC11Code>
<ProductNDC>22840-1030</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Mosquito</ProprietaryName>
<NonProprietaryName>Aedes Taeniorhynchus</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>AEDES TAENIORHYNCHUS</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-1030-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1030-2)</PackageDescription>
<NDC11Code>36987-1030-02</NDC11Code>
<ProductNDC>36987-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duck Feathers</ProprietaryName>
<NonProprietaryName>Duck Feathers</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>ANAS PLATYRHYNCHOS FEATHER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Feather Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Feathers [CS],Allergens [CS],Increased IgG Production [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1030-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1030-2) </PackageDescription>
<NDC11Code>37662-1030-02</NDC11Code>
<ProductNDC>37662-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Magnesia Sulphurica</ProprietaryName>
<NonProprietaryName>Magnesia Sulphurica</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220722</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>12</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>44224-1030-2</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (44224-1030-2) > 14 mL in 1 TUBE</PackageDescription>
<NDC11Code>44224-1030-02</NDC11Code>
<ProductNDC>44224-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>After Bite The Itch Eraser</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140902</StartMarketingDate>
<EndMarketingDate>20200930</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Tender Corporation</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141001</StartMarketingDatePackage>
<EndMarketingDatePackage>20200930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50184-1030-2</NDCCode>
<PackageDescription>1 JAR in 1 BOX (50184-1030-2) > 9.1 g in 1 JAR (50184-1030-1)</PackageDescription>
<NDC11Code>50184-1030-02</NDC11Code>
<ProductNDC>50184-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Supernatural Airbrushed Canvas Broad Spectrum Spf 15 Sunscreen</ProprietaryName>
<ProprietaryNameSuffix>Extra Rich</ProprietaryNameSuffix>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>philosophy</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>882.7</StrengthNumber>
<StrengthUnit>mg/9.1g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-28</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>53225-1030-2</NDCCode>
<PackageDescription>1 POUCH in 1 BOX (53225-1030-2) > 3 PATCH in 1 POUCH > 8650 mg in 1 PATCH</PackageDescription>
<NDC11Code>53225-1030-02</NDC11Code>
<ProductNDC>53225-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Viva Patch</ProprietaryName>
<NonProprietaryName>Camphor, Lidocaine, And Methyl Salicylate</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160831</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Terrain Pharmaceuticals</LabelerName>
<SubstanceName>LIDOCAINE; CAMPHOR (NATURAL); METHYL SALICYLATE</SubstanceName>
<StrengthNumber>2.5; 2; 4</StrengthNumber>
<StrengthUnit>mg/100mg; mg/100mg; mg/100mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62795-1030-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62795-1030-2) > 100 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>62795-1030-02</NDC11Code>
<ProductNDC>62795-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>T Relief Arthritis</ProprietaryName>
<NonProprietaryName>T Relief Arthritis</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Medinatura</LabelerName>
<SubstanceName>ARNICA MONTANA ROOT; SUS SCROFA UMBILICAL CORD; BRYONIA ALBA ROOT; SOLANUM DULCAMARA TOP; SUS SCROFA EMBRYO; LEDUM PALUSTRE TWIG; RHODODENDRON AUREUM LEAF; TOXICODENDRON PUBESCENS LEAF; SANGUINARIA CANADENSIS ROOT; SULFUR; COMFREY ROOT; SUS SCROFA PLACENTA; SUS SCROFA CARTILAGE</SubstanceName>
<StrengthNumber>3; 6; 3; 2; 6; 6; 8; 4; 3; 6; 7; 6; 4</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68745-1030-2</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (68745-1030-2) > 20 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>68745-1030-02</NDC11Code>
<ProductNDC>68745-1030</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mat Lumiere</ProprietaryName>
<ProprietaryNameSuffix>Long-lasting Soft Matte Sunscreen Makeup Broad Spectrum Spf 15, 40 Beige</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CHANEL PARFUMS BEAUTE</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>1.8</StrengthNumber>
<StrengthUnit>mL/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-05-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>69866-1030-2</NDCCode>
<PackageDescription>1 POUCH in 1 BOX (69866-1030-2) > 2 CONTAINER in 1 POUCH > 1 IMPLANT in 1 CONTAINER</PackageDescription>
<NDC11Code>69866-1030-02</NDC11Code>
<ProductNDC>69866-1030</ProductNDC>
<ProductTypeName>CELLULAR THERAPY</ProductTypeName>
<ProprietaryName>Maci</ProprietaryName>
<NonProprietaryName>Autologous Cultured Chondrocytes</NonProprietaryName>
<DosageFormName>IMPLANT</DosageFormName>
<RouteName>INTRA-ARTICULAR</RouteName>
<StartMarketingDate>20170609</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125603</ApplicationNumber>
<LabelerName>Vericel Corporation</LabelerName>
<SubstanceName>AUTOLOGOUS CULTURED CHONDROCYTES; PORK COLLAGEN</SubstanceName>
<StrengthNumber>15000000; 15</StrengthNumber>
<StrengthUnit>1/1; cm2/1</StrengthUnit>
<Pharm_Classes>Autologous Cultured Cell [EPC], Cells, Cultured, Autologous [EXT], Chondrocytes [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69866-1030-8</NDCCode>
<PackageDescription>2 BAG in 1 BOX (69866-1030-8) / 1 BOTTLE, PLASTIC in 1 BAG (69866-1030-7) / 1 IMPLANT in 1 BOTTLE, PLASTIC (69866-1030-6) </PackageDescription>
<NDC11Code>69866-1030-08</NDC11Code>
<ProductNDC>69866-1030</ProductNDC>
<ProductTypeName>CELLULAR THERAPY</ProductTypeName>
<ProprietaryName>Maci</ProprietaryName>
<NonProprietaryName>Autologous Cultured Chondrocytes</NonProprietaryName>
<DosageFormName>IMPLANT</DosageFormName>
<RouteName>INTRA-ARTICULAR</RouteName>
<StartMarketingDate>20170609</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125603</ApplicationNumber>
<LabelerName>Vericel Corporation</LabelerName>
<SubstanceName>AUTOLOGOUS CULTURED CHONDROCYTES; PORK COLLAGEN</SubstanceName>
<StrengthNumber>15000000; 15</StrengthNumber>
<StrengthUnit>1/1; cm2/1</StrengthUnit>
<Pharm_Classes>Autologous Cultured Cell [EPC], Cells, Cultured, Autologous [EXT], Chondrocytes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MACI® (autologous cultured chondrocytes on porcine collagen membrane) is an autologous cellularized scaffold product indicated for the repair of single or multiple symptomatic, full-thickness cartilage defects of the knee with or without bone involvement in adults. Limitations of Use: 1 Effectiveness of MACI in joints other than the knee has not been established., 2 Safety and effectiveness of MACI in patients over the age of 55 years have not been established.</IndicationAndUsage>
<Description>MACI, autologous cultured chondrocytes on porcine collagen membrane, is a cellular sheet that consists of autologous chondrocytes seeded on a 3 x 5 cm, resorbable porcine Type I/III collagen membrane, for implantation into cartilage defects of the knee. The active ingredients of MACI are the autologous cultured chondrocytes and porcine Type I/III collagen. The autologous chondrocytes are propagated in cell culture and are seeded on the collagen at a density of 500,000 to 1,000,000 cells per cm2. The final MACI implant contains at least 500,000 cells per cm2 and does not contain any preservative. The product manufacture also uses reagents derived from animal materials. The resorbable, Type I/III, collagen membrane, which is a component of MACI, is porcine-derived. Fetal bovine serum is a component in the culture medium used to propagate the autologous chondrocytes; therefore, trace quantities of bovine-derived proteins may be present in MACI. These animal-derived reagents are tested for viruses, retroviruses, bacteria, fungi, yeast, and mycoplasma before use. MACI may contain residual gentamicin because it is included during manufacture. Gentamicin is not included in the transport medium used to maintain product stability. Studies determined an average of 9.2 μg residual gentamicin per MACI implant. A final sterility test is initiated prior to shipping, but the result will not be available prior to implantation. Passing results from preliminary in-process microbial tests are required for release of MACI for shipping.</Description>
</NDC>
<NDC>
<NDCCode>71335-1030-2</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (71335-1030-2) </PackageDescription>
<NDC11Code>71335-1030-02</NDC11Code>
<ProductNDC>71335-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202389</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram oxalate is a selective serotonin reuptake inhibitor (SSRI) indicated for the: 1 treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older ( 1) , 2 treatment of generalized anxiety disorder (GAD) in adults ( 1) .</IndicationAndUsage>
<Description>Escitalopram oxalate contains escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3(dimethyl-amino)propyl]-1-( p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula:. The molecular formula is C 20H 21FN 2O C 2H 2O 4and the molecular weight is 414.40. Escitalopram oxalate occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are film-coated, round tablets containing 6.38 mg, 12.75 mg, 25.50 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: croscarmellose sodium, microcrystalline cellulose, hypromellose, colloidal anhydrous silica, magnesium stearate and talc. The film coating contains hypromellose, titanium dioxide, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>39822-0123-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) </PackageDescription>
<NDC11Code>39822-0123-02</NDC11Code>
<ProductNDC>39822-0123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0170-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)</PackageDescription>
<NDC11Code>39822-0170-02</NDC11Code>
<ProductNDC>39822-0170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>20140115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0277-5</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) </PackageDescription>
<NDC11Code>39822-0277-05</NDC11Code>
<ProductNDC>39822-0277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baciim</ProprietaryName>
<NonProprietaryName>Bacitracin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19970509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064153</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BACITRACIN</SubstanceName>
<StrengthNumber>50000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Synthesis & Repair [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0330-2</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE (39822-0330-2)</PackageDescription>
<NDC11Code>39822-0330-02</NDC11Code>
<ProductNDC>39822-0330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neo-fradin</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065010</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>87.5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0350-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) </PackageDescription>
<NDC11Code>39822-0350-02</NDC11Code>
<ProductNDC>39822-0350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lincomycin</ProprietaryName>
<NonProprietaryName>Lincomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL</RouteName>
<StartMarketingDate>20150705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201746</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
</NDC>
<NDC>
<NDCCode>39822-0460-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0460-02</NDC11Code>
<ProductNDC>39822-0460</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0470-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0470-02</NDC11Code>
<ProductNDC>39822-0470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0615-2</NDCCode>
<PackageDescription>12 CARTON in 1 CARTON (39822-0615-2) > 1 VIAL in 1 CARTON (39822-0615-1) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0615-02</NDC11Code>
<ProductNDC>39822-0615</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064216</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colistimethate for Injection is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas Aeruginosa. Colistimethate for Injection may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection and other antibacterial drugs, Colistimethate for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Colistimethate for Injection USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C 58H 105N 16Na 5O 28S 5 and the structural formula is represented below:.</Description>
</NDC>
<NDC>
<NDCCode>39822-0617-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0617-1) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0617-01</NDC11Code>
<ProductNDC>39822-0617</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205356</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0617-2</NDCCode>
<PackageDescription>12 VIAL in 1 CARTON (39822-0617-2) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0617-02</NDC11Code>
<ProductNDC>39822-0617</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205356</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0706-2</NDCCode>
<PackageDescription>10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) </PackageDescription>
<NDC11Code>39822-0706-02</NDC11Code>
<ProductNDC>39822-0706</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Streptomycin</ProprietaryName>
<NonProprietaryName>Streptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19980630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064210</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>STREPTOMYCIN SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin.</Description>
</NDC>
<NDC>
<NDCCode>39822-1201-2</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (39822-1201-2) / 1 mL in 1 AMPULE (39822-1201-1) </PackageDescription>
<NDC11Code>39822-1201-02</NDC11Code>
<ProductNDC>39822-1201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates</ProprietaryName>
<NonProprietaryName>Neomycin And Polymyxin B Sulfates</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20060119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065106</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>40; 200000</StrengthNumber>
<StrengthUnit>mg/mL; [USP'U]/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neomycin and Polymyxin B Sulfates Solution for Irrigation is indicated for short-term use (up to 10 days) as a continuous irrigant or rinse in the urinary bladder of abacteriuric patients to help prevent bacteriuria and gram-negative rod septicemia associated with the use of indwelling catheters. Since organisms gain entrance to the bladder by way of, through, and around the catheter, significant bacteriuria is induced by bacterial multiplication in the bladder urine, in the mucoid film often present between catheter and urethra, and in other sites. Urinary tract infection may result from the repeated presence in the urine of large numbers of pathogenic bacteria. The use of closed systems with indwelling catheters has been shown to reduce the risk of infection. A three-way closed catheter system with constant neomycin-polymyxin B bladder rinse is indicated to prevent the development of infection while using indwelling catheters. If uropathogens are isolated, they should be identified and tested for susceptibility so that appropriate antimicrobial therapy for systemic use can be initiated.</IndicationAndUsage>
<Description>Neomycin and Polymyxin B Sulfates Solution for Irrigation is a concentrated sterile antibiotic solution to be diluted for urinary bladder irrigation. Each mL contains neomycin sulfate equivalent to 40 mg neomycin base, 200,000 units polymyxin B sulfate, and Water for Injection, inactive ingredient: sulfuric acid. The 20-mL multiple dose vial contains, in addition to the above, 1 mg methylparaben (0.1%) added as a preservative. Neomycin sulfate, an antibiotic of the aminoglycoside group, is the sulfate salt of neomycin B and C produced by Streptomyces fradiae. It has a potency equivalent to not less than 600 mcg of neomycin per mg. The structural formulae are:. Polymyxin B sulfate, a polypeptide antibiotic, is the sulfate salt of polymyxin B 1 and B 2 produced by the growth of Bacillus polymyxa. It has a potency of not less than 6,000 polymyxin B units per mg. The structural formulae are:.</Description>
</NDC>
<NDC>
<NDCCode>39822-1800-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-1800-1) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-1800-01</NDC11Code>
<ProductNDC>39822-1800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20250828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211072</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>39822-2080-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-2080-01</NDC11Code>
<ProductNDC>39822-2080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eribulin Mesylate</ProprietaryName>
<NonProprietaryName>Eribulin Mesylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219054</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ERIBULIN MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>39822-2100-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) </PackageDescription>
<NDC11Code>39822-2100-02</NDC11Code>
<ProductNDC>39822-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dactinomycin</ProprietaryName>
<NonProprietaryName>Dactinomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203999</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>DACTINOMYCIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .</IndicationAndUsage>
<Description>Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-3030-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-3030-2) / 6 mL in 1 VIAL, SINGLE-DOSE (39822-3030-1) </PackageDescription>
<NDC11Code>39822-3030-02</NDC11Code>
<ProductNDC>39822-3030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pentamidine Isethionate</ProprietaryName>
<NonProprietaryName>Pentamidine Isethionate</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20230404</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206983</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PENTAMIDINE ISETHIONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/6mL</StrengthUnit>
<Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pentamidine Isethionate is indicated for the prevention of Pneumocystis jiroveci pneumonia (PJP) in high-risk, HIV-infected patients defined by one or both of the following criteria:. i. a history of one or more episodes of PJP. ii. a peripheral CD4+ (T4 helper/inducer) lymphocyte count less than or equal to 200/mm 3. These indications are based on the results of an 18-month randomized, dose-response trial in high risk HIV-infected patients and on existing epidemiological data from natural history studies. The patient population of the controlled trial consisted of 408 patients, 237 of whom had a history of one or more episodes of PJP. The remaining patients without a history of PJP included 55 patients with Kaposi’s sarcoma and 116 patients with other AIDS diagnoses, ARC or asymptomatic HIV infection. Patients were randomly assigned to receive Pentamidine isethionate via the Respirgard ® II nebulizer at one of the following three doses: 30 mg every two weeks (n=135), 150 mg every two weeks (n=134) or 300 mg every four weeks (n=139). The results of the trial demonstrated a significant protective effect (p<0.01) against PJP with the 300 mg every four week dosage regimen compared to the 30 mg every two week dosage regimen. The 300 mg dose regimen reduced the risk of developing PJP by 50 to 70% compared to the 30 mg regimen. A total of 293 patients (72% of all patients) also received zidovudine at sometime during the trial. The analysis of the data demonstrated the efficacy of the 300 mg dose even after adjusting for the effect of zidovudine. The results of the trial further demonstrate that the dose and frequency of dosing are important to the efficacy of Pentamidine Isethionate prophylaxis in that multiple analyses consistently demonstrated a trend toward greater efficacy with 300 mg every four weeks as compared to 150 mg every two weeks. No dose-response was observed for reduction in overall mortality; however, mortality from PJP was low in all three dosage groups.</IndicationAndUsage>
<Description>Pentamidine Isethionate for inhalation, an antifungal agent, is a nonpyrogenic lyophilized product. After reconstitution with Sterile Water for Injection, USP, Pentamidine Isethionate is administered by inhalation via the Respirgard ® II nebulizer [Marquest, Englewood, CO] (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate, 4,4’-[1,5-pentane-diylbis(oxy)]bis-benzenecarboximidamid, is a white crystalline powder soluble in water and glycerin and insoluble in ether, acetone, and chloroform. C 19H 24N 4O 22C 2H 6O 4S 592.68. Each vial contains 300 mg pentamidine isethionate.</Description>
</NDC>
</NDCList>