{
"NDC": [
{
"NDCCode": "39822-4200-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-4200-2) > 5 mL in 1 VIAL (39822-4200-1) ",
"NDC11Code": "39822-4200-02",
"ProductNDC": "39822-4200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20121201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091115",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121201",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "39822-4200-6",
"PackageDescription": "10 VIAL in 1 CARTON (39822-4200-6) > 10 mL in 1 VIAL (39822-4200-5) ",
"NDC11Code": "39822-4200-06",
"ProductNDC": "39822-4200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20121201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091115",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121201",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "62742-4200-2",
"PackageDescription": "1 TUBE in 1 CARTON (62742-4200-2) > 59 g in 1 TUBE (62742-4200-1) ",
"NDC11Code": "62742-4200-02",
"ProductNDC": "62742-4200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "6000x Elemental Screen Broad Spectrum Spf30 Sunscreen",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210208",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Allure Labs Inc",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "189",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20210208",
"SamplePackage": "N",
"IndicationAndUsage": "Uses helps to prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "68071-4200-2",
"PackageDescription": "120 TABLET, COATED in 1 BOTTLE (68071-4200-2) ",
"NDC11Code": "68071-4200-02",
"ProductNDC": "68071-4200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20000701",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0123-2",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) ",
"NDC11Code": "39822-0123-02",
"ProductNDC": "39822-0123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207847",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0170-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)",
"NDC11Code": "39822-0170-02",
"ProductNDC": "39822-0170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "20140115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC],Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0277-5",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) ",
"NDC11Code": "39822-0277-05",
"ProductNDC": "39822-0277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baciim",
"NonProprietaryName": "Bacitracin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19970509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064153",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "BACITRACIN",
"StrengthNumber": "50000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Decreased Cell Wall Synthesis & Repair [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19970509",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0330-2",
"PackageDescription": "59 mL in 1 BOTTLE (39822-0330-2)",
"NDC11Code": "39822-0330-02",
"ProductNDC": "39822-0330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neo-fradin",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20020523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065010",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "87.5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "39822-0350-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) ",
"NDC11Code": "39822-0350-02",
"ProductNDC": "39822-0350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lincomycin",
"NonProprietaryName": "Lincomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL",
"StartMarketingDate": "20150705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201746",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LINCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2022-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150705",
"SamplePackage": "N",
"IndicationAndUsage": "Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP)."
},
{
"NDCCode": "39822-0460-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0460-02",
"ProductNDC": "39822-0460",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0470-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0470-02",
"ProductNDC": "39822-0470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0615-2",
"PackageDescription": "12 CARTON in 1 CARTON (39822-0615-2) > 1 VIAL in 1 CARTON (39822-0615-1) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0615-02",
"ProductNDC": "39822-0615",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064216",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110101",
"SamplePackage": "N",
"IndicationAndUsage": "Colistimethate for Injection is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas Aeruginosa. Colistimethate for Injection may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection and other antibacterial drugs, Colistimethate for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Colistimethate for Injection USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C 58H 105N 16Na 5O 28S 5 and the structural formula is represented below:."
},
{
"NDCCode": "39822-0617-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0617-1) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0617-01",
"ProductNDC": "39822-0617",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205356",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "COLISTIMETHATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160701",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0617-2",
"PackageDescription": "12 VIAL in 1 CARTON (39822-0617-2) > 2 mL in 1 VIAL",
"NDC11Code": "39822-0617-02",
"ProductNDC": "39822-0617",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205356",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "COLISTIMETHATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160701",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0706-2",
"PackageDescription": "10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) ",
"NDC11Code": "39822-0706-02",
"ProductNDC": "39822-0706",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Streptomycin",
"NonProprietaryName": "Streptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19980630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064210",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "STREPTOMYCIN SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980630",
"SamplePackage": "N",
"IndicationAndUsage": "Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin."
},
{
"NDCCode": "39822-1030-2",
"PackageDescription": "3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) ",
"NDC11Code": "39822-1030-02",
"ProductNDC": "39822-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen Lysine",
"NonProprietaryName": "Ibuprofen Lysine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202402",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "IBUPROFEN LYSINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160408",
"SamplePackage": "N",
"IndicationAndUsage": "Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.",
"Description": "Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol."
},
{
"NDCCode": "39822-1201-2",
"PackageDescription": "10 AMPULE in 1 CARTON (39822-1201-2) / 1 mL in 1 AMPULE (39822-1201-1) ",
"NDC11Code": "39822-1201-02",
"ProductNDC": "39822-1201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates",
"NonProprietaryName": "Neomycin And Polymyxin B Sulfates",
"DosageFormName": "SOLUTION",
"RouteName": "IRRIGATION",
"StartMarketingDate": "20060119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065106",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "40; 200000",
"StrengthUnit": "mg/mL; [USP'U]/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060119",
"SamplePackage": "N",
"IndicationAndUsage": "Neomycin and Polymyxin B Sulfates Solution for Irrigation is indicated for short-term use (up to 10 days) as a continuous irrigant or rinse in the urinary bladder of abacteriuric patients to help prevent bacteriuria and gram-negative rod septicemia associated with the use of indwelling catheters. Since organisms gain entrance to the bladder by way of, through, and around the catheter, significant bacteriuria is induced by bacterial multiplication in the bladder urine, in the mucoid film often present between catheter and urethra, and in other sites. Urinary tract infection may result from the repeated presence in the urine of large numbers of pathogenic bacteria. The use of closed systems with indwelling catheters has been shown to reduce the risk of infection. A three-way closed catheter system with constant neomycin-polymyxin B bladder rinse is indicated to prevent the development of infection while using indwelling catheters. If uropathogens are isolated, they should be identified and tested for susceptibility so that appropriate antimicrobial therapy for systemic use can be initiated.",
"Description": "Neomycin and Polymyxin B Sulfates Solution for Irrigation is a concentrated sterile antibiotic solution to be diluted for urinary bladder irrigation. Each mL contains neomycin sulfate equivalent to 40 mg neomycin base, 200,000 units polymyxin B sulfate, and Water for Injection, inactive ingredient: sulfuric acid. The 20-mL multiple dose vial contains, in addition to the above, 1 mg methylparaben (0.1%) added as a preservative. Neomycin sulfate, an antibiotic of the aminoglycoside group, is the sulfate salt of neomycin B and C produced by Streptomyces fradiae. It has a potency equivalent to not less than 600 mcg of neomycin per mg. The structural formulae are:. Polymyxin B sulfate, a polypeptide antibiotic, is the sulfate salt of polymyxin B 1 and B 2 produced by the growth of Bacillus polymyxa. It has a potency of not less than 6,000 polymyxin B units per mg. The structural formulae are:."
},
{
"NDCCode": "39822-1800-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-1800-1) / 2 mL in 1 VIAL",
"NDC11Code": "39822-1800-01",
"ProductNDC": "39822-1800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20250828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211072",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250902",
"SamplePackage": "N",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH."
},
{
"NDCCode": "39822-2080-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-2080-01",
"ProductNDC": "39822-2080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eribulin Mesylate",
"NonProprietaryName": "Eribulin Mesylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219054",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ERIBULIN MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260407",
"SamplePackage": "N",
"Description": "Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment."
},
{
"NDCCode": "39822-2100-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) ",
"NDC11Code": "39822-2100-02",
"ProductNDC": "39822-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dactinomycin",
"NonProprietaryName": "Dactinomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203999",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "DACTINOMYCIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190731",
"SamplePackage": "N",
"IndicationAndUsage": "Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .",
"Description": "Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol."
},
{
"NDCCode": "39822-3030-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-3030-2) / 6 mL in 1 VIAL, SINGLE-DOSE (39822-3030-1) ",
"NDC11Code": "39822-3030-02",
"ProductNDC": "39822-3030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pentamidine Isethionate",
"NonProprietaryName": "Pentamidine Isethionate",
"DosageFormName": "INHALANT",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20230404",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206983",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PENTAMIDINE ISETHIONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/6mL",
"Pharm_Classes": "Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230404",
"SamplePackage": "N",
"IndicationAndUsage": "Pentamidine Isethionate is indicated for the prevention of Pneumocystis jiroveci pneumonia (PJP) in high-risk, HIV-infected patients defined by one or both of the following criteria:. i. a history of one or more episodes of PJP. ii. a peripheral CD4+ (T4 helper/inducer) lymphocyte count less than or equal to 200/mm 3. These indications are based on the results of an 18-month randomized, dose-response trial in high risk HIV-infected patients and on existing epidemiological data from natural history studies. The patient population of the controlled trial consisted of 408 patients, 237 of whom had a history of one or more episodes of PJP. The remaining patients without a history of PJP included 55 patients with Kaposi’s sarcoma and 116 patients with other AIDS diagnoses, ARC or asymptomatic HIV infection. Patients were randomly assigned to receive Pentamidine isethionate via the Respirgard ® II nebulizer at one of the following three doses: 30 mg every two weeks (n=135), 150 mg every two weeks (n=134) or 300 mg every four weeks (n=139). The results of the trial demonstrated a significant protective effect (p<0.01) against PJP with the 300 mg every four week dosage regimen compared to the 30 mg every two week dosage regimen. The 300 mg dose regimen reduced the risk of developing PJP by 50 to 70% compared to the 30 mg regimen. A total of 293 patients (72% of all patients) also received zidovudine at sometime during the trial. The analysis of the data demonstrated the efficacy of the 300 mg dose even after adjusting for the effect of zidovudine. The results of the trial further demonstrate that the dose and frequency of dosing are important to the efficacy of Pentamidine Isethionate prophylaxis in that multiple analyses consistently demonstrated a trend toward greater efficacy with 300 mg every four weeks as compared to 150 mg every two weeks. No dose-response was observed for reduction in overall mortality; however, mortality from PJP was low in all three dosage groups.",
"Description": "Pentamidine Isethionate for inhalation, an antifungal agent, is a nonpyrogenic lyophilized product. After reconstitution with Sterile Water for Injection, USP, Pentamidine Isethionate is administered by inhalation via the Respirgard ® II nebulizer [Marquest, Englewood, CO] (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate, 4,4’-[1,5-pentane-diylbis(oxy)]bis-benzenecarboximidamid, is a white crystalline powder soluble in water and glycerin and insoluble in ether, acetone, and chloroform. C 19H 24N 4O 22C 2H 6O 4S 592.68. Each vial contains 300 mg pentamidine isethionate."
},
{
"NDCCode": "39822-3050-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-3050-2) / 3 mL in 1 VIAL",
"NDC11Code": "39822-3050-02",
"ProductNDC": "39822-3050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pentamidine Isethionate",
"NonProprietaryName": "Pentamidine Isethionate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230404",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206982",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PENTAMIDINE ISETHIONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230404",
"SamplePackage": "N",
"IndicationAndUsage": "Pentamidine isethionate for injection is indicated for the treatment of pneumonia due to Pneumocystis carinii.",
"Description": "Pentamidine isethionate for injection, an anti-protozoal agent, is a sterile, nonpyrogenic, lyophilized product. After reconstitution, it should be administered by intramuscular (IM) or intravenous (IV) routes (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate is a white crystalline powder soluble in water and glycerin, slightly soluble in alcohol and insoluble in ether, acetone, and chloroform. It is chemically designated as 4,4-[1,5-pentanediylbis(oxy)]bis-benzenecarboximidamid with the following structural formula:. Each vial contains: Pentamidine isethionate . . . . . . . . . . . . . 300 mg."
},
{
"NDCCode": "39822-4025-2",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (39822-4025-2) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-4025-02",
"ProductNDC": "39822-4025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206039",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-12-11",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "39822-4050-3",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (39822-4050-3) > 2 mL in 1 VIAL, SINGLE-DOSE (39822-4050-2)",
"NDC11Code": "39822-4050-03",
"ProductNDC": "39822-4050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenytoin Sodium",
"NonProprietaryName": "Phenytoin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040573",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PHENYTOIN SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "39822-4070-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-4070-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-4070-02",
"ProductNDC": "39822-4070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N"
},
{
"NDCCode": "39822-4500-2",
"PackageDescription": "2 VIAL, SINGLE-DOSE in 1 CARTON (39822-4500-2) / 100 mL in 1 VIAL, SINGLE-DOSE (39822-4500-1) ",
"NDC11Code": "39822-4500-02",
"ProductNDC": "39822-4500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edaravone",
"NonProprietaryName": "Edaravone",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241202",
"EndMarketingDate": "20260531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217565",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "EDARAVONE",
"StrengthNumber": "30",
"StrengthUnit": "mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20241202",
"EndMarketingDatePackage": "20260531",
"SamplePackage": "N",
"IndicationAndUsage": "Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).",
"Description": "The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5-one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C 10H 10N 2O and the molecular weight is 174.20. The chemical structure is. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. 30 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4. 60 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 60 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (20 mg), sodium bisulfite (40 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4."
},
{
"NDCCode": "39822-4510-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-4510-2) / 100 mL in 1 VIAL, SINGLE-DOSE (39822-4510-1) ",
"NDC11Code": "39822-4510-02",
"ProductNDC": "39822-4510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edaravone",
"NonProprietaryName": "Edaravone",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217565",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "EDARAVONE",
"StrengthNumber": "60",
"StrengthUnit": "mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241202",
"SamplePackage": "N",
"IndicationAndUsage": "Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).",
"Description": "The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5-one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C 10H 10N 2O and the molecular weight is 174.20. The chemical structure is. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. 30 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4. 60 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 60 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (20 mg), sodium bisulfite (40 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4."
},
{
"NDCCode": "39822-5500-3",
"PackageDescription": "25 AMPULE in 1 CARTON (39822-5500-3) > 1 mL in 1 AMPULE (39822-5500-2)",
"NDC11Code": "39822-5500-03",
"ProductNDC": "39822-5500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040737",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-12-18",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "39822-5500-6",
"PackageDescription": "25 AMPULE in 1 CARTON (39822-5500-6) > 2 mL in 1 AMPULE (39822-5500-5)",
"NDC11Code": "39822-5500-06",
"ProductNDC": "39822-5500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040737",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-12-18",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "39822-5525-3",
"PackageDescription": "25 AMPULE in 1 CARTON (39822-5525-3) / 1 mL in 1 AMPULE (39822-5525-2) ",
"NDC11Code": "39822-5525-03",
"ProductNDC": "39822-5525",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20150130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040737",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150130",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.",
"Description": "Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>39822-4200-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-4200-2) > 5 mL in 1 VIAL (39822-4200-1) </PackageDescription>
<NDC11Code>39822-4200-02</NDC11Code>
<ProductNDC>39822-4200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20121201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091115</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>39822-4200-6</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-4200-6) > 10 mL in 1 VIAL (39822-4200-5) </PackageDescription>
<NDC11Code>39822-4200-06</NDC11Code>
<ProductNDC>39822-4200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20121201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091115</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>62742-4200-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (62742-4200-2) > 59 g in 1 TUBE (62742-4200-1) </PackageDescription>
<NDC11Code>62742-4200-02</NDC11Code>
<ProductNDC>62742-4200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>6000x Elemental Screen Broad Spectrum Spf30 Sunscreen</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210208</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Allure Labs Inc</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>189</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses helps to prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68071-4200-2</NDCCode>
<PackageDescription>120 TABLET, COATED in 1 BOTTLE (68071-4200-2) </PackageDescription>
<NDC11Code>68071-4200-02</NDC11Code>
<ProductNDC>68071-4200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0123-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 BOX (39822-0123-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (39822-0123-1) </PackageDescription>
<NDC11Code>39822-0123-02</NDC11Code>
<ProductNDC>39822-0123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207847</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0170-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0170-2) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0170-1)</PackageDescription>
<NDC11Code>39822-0170-02</NDC11Code>
<ProductNDC>39822-0170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>20140115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0277-5</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0277-5) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0277-2) </PackageDescription>
<NDC11Code>39822-0277-05</NDC11Code>
<ProductNDC>39822-0277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baciim</ProprietaryName>
<NonProprietaryName>Bacitracin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19970509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064153</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BACITRACIN</SubstanceName>
<StrengthNumber>50000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Synthesis & Repair [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0330-2</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE (39822-0330-2)</PackageDescription>
<NDC11Code>39822-0330-02</NDC11Code>
<ProductNDC>39822-0330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neo-fradin</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065010</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>87.5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0350-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0350-2) > 2 mL in 1 VIAL (39822-0350-1) </PackageDescription>
<NDC11Code>39822-0350-02</NDC11Code>
<ProductNDC>39822-0350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lincomycin</ProprietaryName>
<NonProprietaryName>Lincomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCONJUNCTIVAL</RouteName>
<StartMarketingDate>20150705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201746</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lincomycin Injection, USP is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Lincomycin and other antibacterial drugs, Lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6SHClH 2O and the molecular weight is 461.01. The structural formula is represented below. Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin Injection is a sterile solution for intramuscular and intravenous use. Lincomycin injection is supplied in 2 mL and 10 mL multiple-dose vials containing the equivalent of 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
</NDC>
<NDC>
<NDCCode>39822-0460-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0460-02</NDC11Code>
<ProductNDC>39822-0460</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0470-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0470-02</NDC11Code>
<ProductNDC>39822-0470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0615-2</NDCCode>
<PackageDescription>12 CARTON in 1 CARTON (39822-0615-2) > 1 VIAL in 1 CARTON (39822-0615-1) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0615-02</NDC11Code>
<ProductNDC>39822-0615</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064216</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colistimethate for Injection is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas Aeruginosa. Colistimethate for Injection may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection and other antibacterial drugs, Colistimethate for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Colistimethate for Injection USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C 58H 105N 16Na 5O 28S 5 and the structural formula is represented below:.</Description>
</NDC>
<NDC>
<NDCCode>39822-0617-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0617-1) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0617-01</NDC11Code>
<ProductNDC>39822-0617</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205356</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0617-2</NDCCode>
<PackageDescription>12 VIAL in 1 CARTON (39822-0617-2) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0617-02</NDC11Code>
<ProductNDC>39822-0617</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205356</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0706-2</NDCCode>
<PackageDescription>10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) </PackageDescription>
<NDC11Code>39822-0706-02</NDC11Code>
<ProductNDC>39822-0706</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Streptomycin</ProprietaryName>
<NonProprietaryName>Streptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19980630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064210</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>STREPTOMYCIN SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin.</Description>
</NDC>
<NDC>
<NDCCode>39822-1030-2</NDCCode>
<PackageDescription>3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) </PackageDescription>
<NDC11Code>39822-1030-02</NDC11Code>
<ProductNDC>39822-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen Lysine</ProprietaryName>
<NonProprietaryName>Ibuprofen Lysine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202402</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>IBUPROFEN LYSINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.</IndicationAndUsage>
<Description>Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>39822-1201-2</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (39822-1201-2) / 1 mL in 1 AMPULE (39822-1201-1) </PackageDescription>
<NDC11Code>39822-1201-02</NDC11Code>
<ProductNDC>39822-1201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates</ProprietaryName>
<NonProprietaryName>Neomycin And Polymyxin B Sulfates</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>20060119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065106</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>40; 200000</StrengthNumber>
<StrengthUnit>mg/mL; [USP'U]/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neomycin and Polymyxin B Sulfates Solution for Irrigation is indicated for short-term use (up to 10 days) as a continuous irrigant or rinse in the urinary bladder of abacteriuric patients to help prevent bacteriuria and gram-negative rod septicemia associated with the use of indwelling catheters. Since organisms gain entrance to the bladder by way of, through, and around the catheter, significant bacteriuria is induced by bacterial multiplication in the bladder urine, in the mucoid film often present between catheter and urethra, and in other sites. Urinary tract infection may result from the repeated presence in the urine of large numbers of pathogenic bacteria. The use of closed systems with indwelling catheters has been shown to reduce the risk of infection. A three-way closed catheter system with constant neomycin-polymyxin B bladder rinse is indicated to prevent the development of infection while using indwelling catheters. If uropathogens are isolated, they should be identified and tested for susceptibility so that appropriate antimicrobial therapy for systemic use can be initiated.</IndicationAndUsage>
<Description>Neomycin and Polymyxin B Sulfates Solution for Irrigation is a concentrated sterile antibiotic solution to be diluted for urinary bladder irrigation. Each mL contains neomycin sulfate equivalent to 40 mg neomycin base, 200,000 units polymyxin B sulfate, and Water for Injection, inactive ingredient: sulfuric acid. The 20-mL multiple dose vial contains, in addition to the above, 1 mg methylparaben (0.1%) added as a preservative. Neomycin sulfate, an antibiotic of the aminoglycoside group, is the sulfate salt of neomycin B and C produced by Streptomyces fradiae. It has a potency equivalent to not less than 600 mcg of neomycin per mg. The structural formulae are:. Polymyxin B sulfate, a polypeptide antibiotic, is the sulfate salt of polymyxin B 1 and B 2 produced by the growth of Bacillus polymyxa. It has a potency of not less than 6,000 polymyxin B units per mg. The structural formulae are:.</Description>
</NDC>
<NDC>
<NDCCode>39822-1800-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-1800-1) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-1800-01</NDC11Code>
<ProductNDC>39822-1800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20250828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211072</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>39822-2080-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-2080-01</NDC11Code>
<ProductNDC>39822-2080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eribulin Mesylate</ProprietaryName>
<NonProprietaryName>Eribulin Mesylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219054</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ERIBULIN MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>39822-2100-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) </PackageDescription>
<NDC11Code>39822-2100-02</NDC11Code>
<ProductNDC>39822-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dactinomycin</ProprietaryName>
<NonProprietaryName>Dactinomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203999</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>DACTINOMYCIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .</IndicationAndUsage>
<Description>Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-3030-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-3030-2) / 6 mL in 1 VIAL, SINGLE-DOSE (39822-3030-1) </PackageDescription>
<NDC11Code>39822-3030-02</NDC11Code>
<ProductNDC>39822-3030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pentamidine Isethionate</ProprietaryName>
<NonProprietaryName>Pentamidine Isethionate</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20230404</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206983</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PENTAMIDINE ISETHIONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/6mL</StrengthUnit>
<Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pentamidine Isethionate is indicated for the prevention of Pneumocystis jiroveci pneumonia (PJP) in high-risk, HIV-infected patients defined by one or both of the following criteria:. i. a history of one or more episodes of PJP. ii. a peripheral CD4+ (T4 helper/inducer) lymphocyte count less than or equal to 200/mm 3. These indications are based on the results of an 18-month randomized, dose-response trial in high risk HIV-infected patients and on existing epidemiological data from natural history studies. The patient population of the controlled trial consisted of 408 patients, 237 of whom had a history of one or more episodes of PJP. The remaining patients without a history of PJP included 55 patients with Kaposi’s sarcoma and 116 patients with other AIDS diagnoses, ARC or asymptomatic HIV infection. Patients were randomly assigned to receive Pentamidine isethionate via the Respirgard ® II nebulizer at one of the following three doses: 30 mg every two weeks (n=135), 150 mg every two weeks (n=134) or 300 mg every four weeks (n=139). The results of the trial demonstrated a significant protective effect (p<0.01) against PJP with the 300 mg every four week dosage regimen compared to the 30 mg every two week dosage regimen. The 300 mg dose regimen reduced the risk of developing PJP by 50 to 70% compared to the 30 mg regimen. A total of 293 patients (72% of all patients) also received zidovudine at sometime during the trial. The analysis of the data demonstrated the efficacy of the 300 mg dose even after adjusting for the effect of zidovudine. The results of the trial further demonstrate that the dose and frequency of dosing are important to the efficacy of Pentamidine Isethionate prophylaxis in that multiple analyses consistently demonstrated a trend toward greater efficacy with 300 mg every four weeks as compared to 150 mg every two weeks. No dose-response was observed for reduction in overall mortality; however, mortality from PJP was low in all three dosage groups.</IndicationAndUsage>
<Description>Pentamidine Isethionate for inhalation, an antifungal agent, is a nonpyrogenic lyophilized product. After reconstitution with Sterile Water for Injection, USP, Pentamidine Isethionate is administered by inhalation via the Respirgard ® II nebulizer [Marquest, Englewood, CO] (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate, 4,4’-[1,5-pentane-diylbis(oxy)]bis-benzenecarboximidamid, is a white crystalline powder soluble in water and glycerin and insoluble in ether, acetone, and chloroform. C 19H 24N 4O 22C 2H 6O 4S 592.68. Each vial contains 300 mg pentamidine isethionate.</Description>
</NDC>
<NDC>
<NDCCode>39822-3050-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-3050-2) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-3050-02</NDC11Code>
<ProductNDC>39822-3050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pentamidine Isethionate</ProprietaryName>
<NonProprietaryName>Pentamidine Isethionate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230404</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206982</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PENTAMIDINE ISETHIONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pentamidine isethionate for injection is indicated for the treatment of pneumonia due to Pneumocystis carinii.</IndicationAndUsage>
<Description>Pentamidine isethionate for injection, an anti-protozoal agent, is a sterile, nonpyrogenic, lyophilized product. After reconstitution, it should be administered by intramuscular (IM) or intravenous (IV) routes (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate is a white crystalline powder soluble in water and glycerin, slightly soluble in alcohol and insoluble in ether, acetone, and chloroform. It is chemically designated as 4,4-[1,5-pentanediylbis(oxy)]bis-benzenecarboximidamid with the following structural formula:. Each vial contains: Pentamidine isethionate . . . . . . . . . . . . . 300 mg.</Description>
</NDC>
<NDC>
<NDCCode>39822-4025-2</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (39822-4025-2) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-4025-02</NDC11Code>
<ProductNDC>39822-4025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206039</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-12-11</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-4050-3</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (39822-4050-3) > 2 mL in 1 VIAL, SINGLE-DOSE (39822-4050-2)</PackageDescription>
<NDC11Code>39822-4050-03</NDC11Code>
<ProductNDC>39822-4050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenytoin Sodium</ProprietaryName>
<NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040573</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PHENYTOIN SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C8 Inducers [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 2D6 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-4070-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-4070-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-4070-02</NDC11Code>
<ProductNDC>39822-4070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-4500-2</NDCCode>
<PackageDescription>2 VIAL, SINGLE-DOSE in 1 CARTON (39822-4500-2) / 100 mL in 1 VIAL, SINGLE-DOSE (39822-4500-1) </PackageDescription>
<NDC11Code>39822-4500-02</NDC11Code>
<ProductNDC>39822-4500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edaravone</ProprietaryName>
<NonProprietaryName>Edaravone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241202</StartMarketingDate>
<EndMarketingDate>20260531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217565</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>EDARAVONE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<EndMarketingDatePackage>20260531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).</IndicationAndUsage>
<Description>The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5-one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C 10H 10N 2O and the molecular weight is 174.20. The chemical structure is. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. 30 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4. 60 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 60 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (20 mg), sodium bisulfite (40 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4.</Description>
</NDC>
<NDC>
<NDCCode>39822-4510-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-4510-2) / 100 mL in 1 VIAL, SINGLE-DOSE (39822-4510-1) </PackageDescription>
<NDC11Code>39822-4510-02</NDC11Code>
<ProductNDC>39822-4510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edaravone</ProprietaryName>
<NonProprietaryName>Edaravone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217565</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>EDARAVONE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).</IndicationAndUsage>
<Description>The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5-one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C 10H 10N 2O and the molecular weight is 174.20. The chemical structure is. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. 30 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4. 60 mg/100 mL single-dose vials:Edaravone injection is supplied for intravenous infusion in a USP Type 1 Glass Vial containing 60 mg edaravone in 100 mL isotonic, sterile, aqueous solution. Individual vial will be placed in a carton (secondary packaging). Each single-dose vial contains the following inactive ingredients: L-cysteine hydrochloride hydrate (20 mg), sodium bisulfite (40 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4.</Description>
</NDC>
<NDC>
<NDCCode>39822-5500-3</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (39822-5500-3) > 1 mL in 1 AMPULE (39822-5500-2)</PackageDescription>
<NDC11Code>39822-5500-03</NDC11Code>
<ProductNDC>39822-5500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040737</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-18</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-5500-6</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (39822-5500-6) > 2 mL in 1 AMPULE (39822-5500-5)</PackageDescription>
<NDC11Code>39822-5500-06</NDC11Code>
<ProductNDC>39822-5500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040737</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-18</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-5525-3</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (39822-5525-3) / 1 mL in 1 AMPULE (39822-5525-2) </PackageDescription>
<NDC11Code>39822-5525-03</NDC11Code>
<ProductNDC>39822-5525</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20150130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040737</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.</IndicationAndUsage>
<Description>Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed.</Description>
</NDC>
</NDCList>