{
"NDC": [
{
"NDCCode": "39822-9995-7",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 BOX (39822-9995-7) > 200 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "39822-9995-07",
"ProductNDC": "39822-9995",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170214",
"EndMarketingDate": "20171031",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "36; 4.5",
"StrengthUnit": "g/200mL; g/200mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-11-01"
},
{
"NDCCode": "39822-0139-7",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0139-7) ",
"NDC11Code": "39822-0139-07",
"ProductNDC": "39822-0139",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin, Tazobactam",
"NonProprietaryName": "Piperacillin, Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207848",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "36; 4.5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180212",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0166-7",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0166-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0166-07",
"ProductNDC": "39822-0166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "19940930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063000",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19940930",
"SamplePackage": "N",
"IndicationAndUsage": "Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable."
},
{
"NDCCode": "39822-0171-7",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0171-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0171-6)",
"NDC11Code": "39822-0171-07",
"ProductNDC": "39822-0171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140425",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC],Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "39822-0190-7",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (39822-0190-7) > 5 mL in 1 VIAL, GLASS",
"NDC11Code": "39822-0190-07",
"ProductNDC": "39822-0190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040784",
"LabelerName": "X-GEN Pharmaceuticals, Inc.",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20140801",
"SamplePackage": "N"
},
{
"NDCCode": "39822-0310-5",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (39822-0310-5) / 1 TABLET in 1 BLISTER PACK (39822-0310-7) ",
"NDC11Code": "39822-0310-05",
"ProductNDC": "39822-0310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin Sulfate",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065220",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20100312",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Neomycin Sulfate Tablets, USP and other antibacterial drugs, Neomycin Sulfate Tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Neomycin Sulfate Tablets, USP, for oral administration, contain neomycin which is an antibiotic obtained from the metabolic products of the actinomycete Streptomycesfradiae. Structurally, neomycin sulfate may be represented as follows. Chemically, it is O-2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→3)- O-β-D-ribofuranosyl-(1→5)- O-[2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→4)]-2-deoxy-D-streptamine. Neomycin B is identical except that the α-D-glucopyranosyl residue in the neobiosamine moiety is β-L-idopyranosyl. Inactive Ingredients: Calcium Stearate, Povidone."
},
{
"NDCCode": "39822-1001-7",
"PackageDescription": "10 VIAL in 1 CARTON (39822-1001-7) > 10 mL in 1 VIAL (39822-1001-6) ",
"NDC11Code": "39822-1001-07",
"ProductNDC": "39822-1001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201580",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC],Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20120518",
"SamplePackage": "N"
},
{
"NDCCode": "0404-9995-30",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (0404-9995-30) / 30 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00404-9995-30",
"ProductNDC": "0404-9995",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyanocobalamine",
"NonProprietaryName": "Cyanocobalamine Injection",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20230609",
"EndMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204829",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "CYANOCOBALAMIN",
"StrengthNumber": "1000",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Vitamin B 12 [CS], Vitamin B12 [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230609",
"EndMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection, USP is also suitable for the vitamin B12 absorption test (Schilling test).",
"Description": "Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin, Sodium Chloride 0.9%. Benzyl Alcohol 1.5% is present as a preservative. Sodium acetate and Glacial acetic acid are present as buffers. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder or purplish crystalline powder. Sparingly soluble in water and soluble in alcohol, practically insoluble in acetone, in chloroform and in either. It is stable to autoclaving for short periods at 121°C. The vitamin B12coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.4. The structural formula is represented below."
},
{
"NDCCode": "39822-0460-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0460-02",
"ProductNDC": "39822-0460",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0470-2",
"PackageDescription": "10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "39822-0470-02",
"ProductNDC": "39822-0470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215324",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"Description": "Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "39822-0650-1",
"PackageDescription": "1 VIAL in 1 CARTON (39822-0650-1) / 50 mL in 1 VIAL",
"NDC11Code": "39822-0650-01",
"ProductNDC": "39822-0650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nelarabine",
"NonProprietaryName": "Nelarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216510",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NELARABINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250217",
"SamplePackage": "N",
"IndicationAndUsage": "Nelarabine injection is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.",
"Description": "Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β- D-arabinofuranosylguanine (ara-G). The chemical name for nelarabine is 2-amino-9-β- D-arabinofuranosyl-6-methoxy-9 H-purine. It has the molecular formula C 11H 15N 5O 5 and a molecular weight of 297.27. Nelarabine has the following structural formula:. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C. Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine injection is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0."
},
{
"NDCCode": "39822-0650-6",
"PackageDescription": "6 VIAL in 1 CARTON (39822-0650-6) / 50 mL in 1 VIAL",
"NDC11Code": "39822-0650-06",
"ProductNDC": "39822-0650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nelarabine",
"NonProprietaryName": "Nelarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216510",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "NELARABINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250217",
"SamplePackage": "N",
"IndicationAndUsage": "Nelarabine injection is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.",
"Description": "Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β- D-arabinofuranosylguanine (ara-G). The chemical name for nelarabine is 2-amino-9-β- D-arabinofuranosyl-6-methoxy-9 H-purine. It has the molecular formula C 11H 15N 5O 5 and a molecular weight of 297.27. Nelarabine has the following structural formula:. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C. Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine injection is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0."
},
{
"NDCCode": "39822-0706-2",
"PackageDescription": "10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) ",
"NDC11Code": "39822-0706-02",
"ProductNDC": "39822-0706",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Streptomycin",
"NonProprietaryName": "Streptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19980630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064210",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "STREPTOMYCIN SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980630",
"SamplePackage": "N",
"IndicationAndUsage": "Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin."
},
{
"NDCCode": "39822-1030-2",
"PackageDescription": "3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) ",
"NDC11Code": "39822-1030-02",
"ProductNDC": "39822-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen Lysine",
"NonProprietaryName": "Ibuprofen Lysine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202402",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "IBUPROFEN LYSINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160408",
"SamplePackage": "N",
"IndicationAndUsage": "Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.",
"Description": "Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol."
},
{
"NDCCode": "39822-1410-6",
"PackageDescription": "10 AMPULE in 1 CARTON (39822-1410-6) > 5 mL in 1 AMPULE (39822-1410-5) ",
"NDC11Code": "39822-1410-06",
"ProductNDC": "39822-1410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rezipres",
"NonProprietaryName": "Ephedrine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210614",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213536",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "EPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "4.7",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211101",
"SamplePackage": "N"
},
{
"NDCCode": "39822-2000-1",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (39822-2000-1) ",
"NDC11Code": "39822-2000-01",
"ProductNDC": "39822-2000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine",
"NonProprietaryName": "Clonidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20131029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203167",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131029",
"SamplePackage": "N",
"IndicationAndUsage": "Clonidine hydrochloride injection is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).",
"Description": "Clonidine hydrochloride injection is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine, 2,6-dichloro-N-2-imidazolidinylidene monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Clonidine hydrochloride injection is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride. Each mL of the 500 mcg/mL (0.5 mg/mL) concentration contains 500 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 5 mg (5000 mcg) of clonidine hydrochloride."
},
{
"NDCCode": "39822-2010-1",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (39822-2010-1) ",
"NDC11Code": "39822-2010-01",
"ProductNDC": "39822-2010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine",
"NonProprietaryName": "Clonidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20131029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203167",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131029",
"SamplePackage": "N",
"IndicationAndUsage": "Clonidine hydrochloride injection is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).",
"Description": "Clonidine hydrochloride injection is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine, 2,6-dichloro-N-2-imidazolidinylidene monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Clonidine hydrochloride injection is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride. Each mL of the 500 mcg/mL (0.5 mg/mL) concentration contains 500 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 5 mg (5000 mcg) of clonidine hydrochloride."
},
{
"NDCCode": "39822-2080-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "39822-2080-01",
"ProductNDC": "39822-2080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eribulin Mesylate",
"NonProprietaryName": "Eribulin Mesylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219054",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "ERIBULIN MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260407",
"SamplePackage": "N",
"Description": "Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment."
},
{
"NDCCode": "39822-2100-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) ",
"NDC11Code": "39822-2100-02",
"ProductNDC": "39822-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dactinomycin",
"NonProprietaryName": "Dactinomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203999",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "DACTINOMYCIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190731",
"SamplePackage": "N",
"IndicationAndUsage": "Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .",
"Description": "Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol."
},
{
"NDCCode": "39822-4000-1",
"PackageDescription": "5 mL in 1 VIAL (39822-4000-1) ",
"NDC11Code": "39822-4000-01",
"ProductNDC": "39822-4000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091485",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110805",
"SamplePackage": "N",
"Description": "Levetiracetam injection is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [ see Dosage and Administration (2.6)]."
},
{
"NDCCode": "39822-5525-3",
"PackageDescription": "25 AMPULE in 1 CARTON (39822-5525-3) / 1 mL in 1 AMPULE (39822-5525-2) ",
"NDC11Code": "39822-5525-03",
"ProductNDC": "39822-5525",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20150130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040737",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150130",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.",
"Description": "Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed."
},
{
"NDCCode": "39822-5550-6",
"PackageDescription": "25 AMPULE in 1 CARTON (39822-5550-6) / 1 mL in 1 AMPULE (39822-5550-5) ",
"NDC11Code": "39822-5550-06",
"ProductNDC": "39822-5550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20150130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040737",
"LabelerName": "XGen Pharmaceuticals DJB, Inc.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150130",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.",
"Description": "Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed."
},
{
"NDCCode": "0363-9995-30",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (0363-9995-30) / 10 TABLET, CHEWABLE in 1 BLISTER PACK",
"NDC11Code": "00363-9995-30",
"ProductNDC": "0363-9995",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wal-itin",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20200801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210088",
"LabelerName": "WALGREENS CO.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200801",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat."
},
{
"NDCCode": "11822-9995-1",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (11822-9995-1) / 6 TABLET in 1 BLISTER PACK",
"NDC11Code": "11822-9995-01",
"ProductNDC": "11822-9995",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Fexofenadine Hydrochloride 60 Mg",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076502",
"LabelerName": "Rite Aid Corporation",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose , 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat."
},
{
"NDCCode": "50436-9995-1",
"PackageDescription": "120 mL in 1 BOTTLE (50436-9995-1)",
"NDC11Code": "50436-9995-01",
"ProductNDC": "50436-9995",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Terocin",
"NonProprietaryName": "Methyl Salicylate, Capsaicin, Menthol And Lidocaine Hydrochloride",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Unit Dose Services",
"SubstanceName": "METHYL SALICYLATE; CAPSAICIN; MENTHOL; LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "25; .025; 10; 2.5",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Temporarily relieves mild aches and pains of muscles or joints."
},
{
"NDCCode": "51754-9995-5",
"PackageDescription": "20 VIAL in 1 CARTON (51754-9995-5) > 100 mL in 1 VIAL (51754-9995-1) ",
"NDC11Code": "51754-9995-05",
"ProductNDC": "51754-9995",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "meq/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220701",
"SamplePackage": "N"
},
{
"NDCCode": "71092-9995-1",
"PackageDescription": "5 g in 1 CONTAINER (71092-9995-1)",
"NDC11Code": "71092-9995-01",
"ProductNDC": "71092-9995",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Triova Pharmaceuticals, LLC",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "71092-9995-2",
"PackageDescription": "25 g in 1 CONTAINER (71092-9995-2)",
"NDC11Code": "71092-9995-02",
"ProductNDC": "71092-9995",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Triova Pharmaceuticals, LLC",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "71092-9995-3",
"PackageDescription": "100 g in 1 CONTAINER (71092-9995-3)",
"NDC11Code": "71092-9995-03",
"ProductNDC": "71092-9995",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Triova Pharmaceuticals, LLC",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "71092-9995-4",
"PackageDescription": "500 g in 1 CONTAINER (71092-9995-4)",
"NDC11Code": "71092-9995-04",
"ProductNDC": "71092-9995",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Triova Pharmaceuticals, LLC",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>39822-9995-7</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 BOX (39822-9995-7) > 200 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>39822-9995-07</NDC11Code>
<ProductNDC>39822-9995</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170214</StartMarketingDate>
<EndMarketingDate>20171031</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>36; 4.5</StrengthNumber>
<StrengthUnit>g/200mL; g/200mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>39822-0139-7</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (39822-0139-7) </PackageDescription>
<NDC11Code>39822-0139-07</NDC11Code>
<ProductNDC>39822-0139</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin, Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207848</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>36; 4.5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0166-7</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0166-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0166-07</NDC11Code>
<ProductNDC>39822-0166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>19940930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063000</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19940930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acute Infections Caused by Susceptible Strains of Pseudomonas aeruginosa. Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Polymyxin B for Injection USP and other antibacterial drugs, Polymyxin B for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Polymyxin B Sulfate is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Polymyxin B 1 (R=CH 3) Polymyxin B 2 (R=H). Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable.</Description>
</NDC>
<NDC>
<NDCCode>39822-0171-7</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0171-7) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0171-6)</PackageDescription>
<NDC11Code>39822-0171-07</NDC11Code>
<ProductNDC>39822-0171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140425</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>39822-0190-7</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (39822-0190-7) > 5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>39822-0190-07</NDC11Code>
<ProductNDC>39822-0190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040784</ApplicationNumber>
<LabelerName>X-GEN Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC],Carbonic Anhydrase Inhibitors [MoA],Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-0310-5</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (39822-0310-5) / 1 TABLET in 1 BLISTER PACK (39822-0310-7) </PackageDescription>
<NDC11Code>39822-0310-05</NDC11Code>
<ProductNDC>39822-0310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin Sulfate</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065220</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Neomycin Sulfate Tablets, USP and other antibacterial drugs, Neomycin Sulfate Tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Neomycin Sulfate Tablets, USP, for oral administration, contain neomycin which is an antibiotic obtained from the metabolic products of the actinomycete Streptomycesfradiae. Structurally, neomycin sulfate may be represented as follows. Chemically, it is O-2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→3)- O-β-D-ribofuranosyl-(1→5)- O-[2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl-(1→4)]-2-deoxy-D-streptamine. Neomycin B is identical except that the α-D-glucopyranosyl residue in the neobiosamine moiety is β-L-idopyranosyl. Inactive Ingredients: Calcium Stearate, Povidone.</Description>
</NDC>
<NDC>
<NDCCode>39822-1001-7</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-1001-7) > 10 mL in 1 VIAL (39822-1001-6) </PackageDescription>
<NDC11Code>39822-1001-07</NDC11Code>
<ProductNDC>39822-1001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201580</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC],Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-9995-30</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (0404-9995-30) / 30 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00404-9995-30</NDC11Code>
<ProductNDC>0404-9995</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyanocobalamine</ProprietaryName>
<NonProprietaryName>Cyanocobalamine Injection</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230609</StartMarketingDate>
<EndMarketingDate>20260331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204829</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230609</StartMarketingDatePackage>
<EndMarketingDatePackage>20260331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection, USP is also suitable for the vitamin B12 absorption test (Schilling test).</IndicationAndUsage>
<Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin, Sodium Chloride 0.9%. Benzyl Alcohol 1.5% is present as a preservative. Sodium acetate and Glacial acetic acid are present as buffers. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder or purplish crystalline powder. Sparingly soluble in water and soluble in alcohol, practically insoluble in acetone, in chloroform and in either. It is stable to autoclaving for short periods at 121°C. The vitamin B12coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.4. The structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>39822-0460-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0460-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0460-02</NDC11Code>
<ProductNDC>39822-0460</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0470-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (39822-0470-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>39822-0470-02</NDC11Code>
<ProductNDC>39822-0470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215324</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin hydrochloride for injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (S a)- (3 S,6 R,7 R,22 R,23 S,26 S,36 R,38a R)-44-[[2- O-(3-Amino-2,3,6-trideoxy-3- C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2 R)-4- methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[l,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula:. Vancomycin hydrochloride for injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin hydrochloride for injection, USP is supplied in single-dose vials, containing 1.28 g or 1.54 g of vancomycin hydrochloride, USP equivalent to 1.25 g or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with sterile water for injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>39822-0650-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (39822-0650-1) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0650-01</NDC11Code>
<ProductNDC>39822-0650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nelarabine</ProprietaryName>
<NonProprietaryName>Nelarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216510</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NELARABINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nelarabine injection is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.</IndicationAndUsage>
<Description>Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β- D-arabinofuranosylguanine (ara-G). The chemical name for nelarabine is 2-amino-9-β- D-arabinofuranosyl-6-methoxy-9 H-purine. It has the molecular formula C 11H 15N 5O 5 and a molecular weight of 297.27. Nelarabine has the following structural formula:. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C. Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine injection is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>39822-0650-6</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (39822-0650-6) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>39822-0650-06</NDC11Code>
<ProductNDC>39822-0650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nelarabine</ProprietaryName>
<NonProprietaryName>Nelarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216510</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>NELARABINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nelarabine injection is indicated for the treatment of T-cell acute lymphoblastic leukemia (T-ALL) and T-cell lymphoblastic lymphoma (T-LBL) in adult and pediatric patients age 1 year and older whose disease has not responded to or has relapsed following treatment with at least 2 chemotherapy regimens.</IndicationAndUsage>
<Description>Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β- D-arabinofuranosylguanine (ara-G). The chemical name for nelarabine is 2-amino-9-β- D-arabinofuranosyl-6-methoxy-9 H-purine. It has the molecular formula C 11H 15N 5O 5 and a molecular weight of 297.27. Nelarabine has the following structural formula:. Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C. Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in Water for Injection, USP. Nelarabine injection is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>39822-0706-2</NDCCode>
<PackageDescription>10 VIAL in 1 BOX (39822-0706-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (39822-0706-1) </PackageDescription>
<NDC11Code>39822-0706-02</NDC11Code>
<ProductNDC>39822-0706</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Streptomycin</ProprietaryName>
<NonProprietaryName>Streptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19980630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064210</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>STREPTOMYCIN SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Streptomycin is indicated for the treatment of individuals with moderate to severe infections caused by susceptibile strains of microorganisms in the specific conditions listed below. 1. Mycobacterium tuberculosis: The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and the Center for Disease Control recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH or rifampin resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. In the past when the national rate of primary drug resistance to isoniazid was known to be less than 4% and was either stable or declining, therapy with two and three drug regimens was considered adequate. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Streptomycin is also indicated for therapy of tuberculosis when one or more of the above drugs is contraindicated because of toxicity or intolerance. The management of tuberculosis has become more complex as a consequence of increasing rates of drug resistance and concomitant HIV infection. Additional consultation from experts in the treatment of tuberculosis may be desirable in those settings. 2. Non-tuberculosis infections: The use of streptomycin should be limited to the treatment of infections caused by bacteria which have been shown to be susceptible to the antibacterial effects of streptomycin and which are not amenable to therapy with less potentially toxic agents. a. Yersinia pestis (plague), b. Francisella tularensis (tularemia), c. Brucella, d. Calymmatobacterium granulomatis (donovanosis, granuloma inguinale), e. H. ducreyi (chancroid), f. H. influenzae (in respiratory, endocardial, and meningeal infections-concomitantly with another antibacterial agent), g. K. pneumoniae pneumonia (concomitantly with another antibacterial agent), h. E.coli, Proteus, A. aerogenes, K. pneumoniae, and Enterococcus faecalis in urinary tract infections, i. Streptococcus viridans, Enterococcus faecalis (in endocardial infections - concomitantly with penicillin), j. Gram-negative bacillary bacteremia (concomitantly with another antibacterial agent). To reduce the development of drug-resistant bacteria and maintain the effectiveness of streptomycin and other antibacterial drugs, streptomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Streptomycin is a water-soluble aminoglycoside derived from Streptomyces griseus. It is marketed as the sulfate salt of streptomycin. The chemical name of streptomycin sulfate is D-Streptamine, O-2-deoxy-2-(methylamino)- α-L-glucopyranosyl-(1→2)- O-5-deoxy-3- C-formyl- α-L-lyxofuranosyl-(1→4)- N,N1-bis(aminoiminomethyl)-,sulfate (2:3) (salt). The molecular formula for Streptomycin Sulfate is (C 21H 39N 7O 12) 2 3H 2SO 4 and the molecular weight is 1457.41. It has the following structural formula:. Streptomycin for Injection, equivalent to 1 gram streptomycin/vial, is supplied as a sterile nonpyrogenic lyophilized cake for intramuscular use after reconstitution. The lyophilized cake may reduce to a powder during shipping. After reconstitution, the pH range for Streptomycin for Injection should be between 4.5 and 7 in a solution containing 200 mg of streptomycin activity per mL. *Each vial of Streptomycin for Injection contains streptomycin sulfate equivalent to 1 gram of streptomycin.</Description>
</NDC>
<NDC>
<NDCCode>39822-1030-2</NDCCode>
<PackageDescription>3 VIAL in 1 CARTON (39822-1030-2) / 2 mL in 1 VIAL (39822-1030-1) </PackageDescription>
<NDC11Code>39822-1030-02</NDC11Code>
<ProductNDC>39822-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen Lysine</ProprietaryName>
<NonProprietaryName>Ibuprofen Lysine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202402</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>IBUPROFEN LYSINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ibuprofen Lysine Injection is indicated to close a clinically significant patent ductus arteriosus (PDA) in premature infants weighing between 500 and 1500 g, who are no more than 32 weeks gestational age when usual medical management (e.g., fluid restriction, diuretics, respiratory support, etc.) is ineffective. The clinical trial was conducted among infants with an asymptomatic PDA. However, the consequences beyond 8 weeks after treatment have not been evaluated; therefore, treatment should be reserved for infants with clear evidence of a clinically significant PDA.</IndicationAndUsage>
<Description>Ibuprofen Lysine Injection is a clear sterile preservative-free solution of the L-lysine salt of (±)-ibuprofen which is the active ingredient. (±)-Ibuprofen is a nonsteroidal anti-inflammatory agent (NSAID). L-lysine is used to create a water-soluble drug product salt suitable for intravenous administration. Each mL of Ibuprofen Lysine Injection contains 17.1 mg of ibuprofen lysine (equivalent to 10 mg of (±)-ibuprofen) in Water for Injection, USP. The pH is adjusted to 7.0 with sodium hydroxide or hydrochloric acid. The structural formula is. Ibuprofen Lysine Injection is designated chemically as α-methyl-4-(2-methyl propyl) benzeneacetic acid lysine salt. Its molecular weight is 352.48. Its empirical formula is C 19H 32N 2O 4. It occurs as a white crystalline solid which is soluble in water and slightly soluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>39822-1410-6</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (39822-1410-6) > 5 mL in 1 AMPULE (39822-1410-5) </PackageDescription>
<NDC11Code>39822-1410-06</NDC11Code>
<ProductNDC>39822-1410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rezipres</ProprietaryName>
<NonProprietaryName>Ephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210614</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213536</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>EPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4.7</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>39822-2000-1</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (39822-2000-1) </PackageDescription>
<NDC11Code>39822-2000-01</NDC11Code>
<ProductNDC>39822-2000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine</ProprietaryName>
<NonProprietaryName>Clonidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20131029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203167</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clonidine hydrochloride injection is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).</IndicationAndUsage>
<Description>Clonidine hydrochloride injection is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine, 2,6-dichloro-N-2-imidazolidinylidene monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Clonidine hydrochloride injection is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride. Each mL of the 500 mcg/mL (0.5 mg/mL) concentration contains 500 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 5 mg (5000 mcg) of clonidine hydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>39822-2010-1</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (39822-2010-1) </PackageDescription>
<NDC11Code>39822-2010-01</NDC11Code>
<ProductNDC>39822-2010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine</ProprietaryName>
<NonProprietaryName>Clonidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20131029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203167</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clonidine hydrochloride injection is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).</IndicationAndUsage>
<Description>Clonidine hydrochloride injection is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine, 2,6-dichloro-N-2-imidazolidinylidene monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Clonidine hydrochloride injection is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride. Each mL of the 500 mcg/mL (0.5 mg/mL) concentration contains 500 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 5 mg (5000 mcg) of clonidine hydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>39822-2080-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2080-1) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>39822-2080-01</NDC11Code>
<ProductNDC>39822-2080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eribulin Mesylate</ProprietaryName>
<NonProprietaryName>Eribulin Mesylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219054</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>ERIBULIN MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H,15 H-furo[3,2- i]furo[2',3':5,6]pyrano[4,3- b][1,4]dioxacyclopentacosin-5(4 H)-one, 2-[(2 S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2 R,3 R,3a S,7 R,8a S,9 S,10a R, 11 S,12 R,13a R,13b S,15 S,18 S,21 S,24 S,26 R,28 R,29a S)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40H 59NO 11CH 4O 3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>39822-2100-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (39822-2100-2) / 1 mL in 1 VIAL, SINGLE-DOSE (39822-2100-1) </PackageDescription>
<NDC11Code>39822-2100-02</NDC11Code>
<ProductNDC>39822-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dactinomycin</ProprietaryName>
<NonProprietaryName>Dactinomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203999</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>DACTINOMYCIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dactinomycin for injection is an actinomycin indicated for the treatment of: 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. ( 1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. ( 1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. ( 1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. ( 1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. ( 1.6) .</IndicationAndUsage>
<Description>Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl- 7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16- tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'- bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15- pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9- dicarboxamide. The molecular formula is C 62H 86N 12O 16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for injection for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol.</Description>
</NDC>
<NDC>
<NDCCode>39822-4000-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (39822-4000-1) </PackageDescription>
<NDC11Code>39822-4000-01</NDC11Code>
<ProductNDC>39822-4000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091485</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110805</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levetiracetam injection is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam injection contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [ see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>39822-5525-3</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (39822-5525-3) / 1 mL in 1 AMPULE (39822-5525-2) </PackageDescription>
<NDC11Code>39822-5525-03</NDC11Code>
<ProductNDC>39822-5525</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20150130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040737</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.</IndicationAndUsage>
<Description>Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed.</Description>
</NDC>
<NDC>
<NDCCode>39822-5550-6</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (39822-5550-6) / 1 mL in 1 AMPULE (39822-5550-5) </PackageDescription>
<NDC11Code>39822-5550-06</NDC11Code>
<ProductNDC>39822-5550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20150130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040737</ApplicationNumber>
<LabelerName>XGen Pharmaceuticals DJB, Inc.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride injection is indicated for the following conditions: 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.</IndicationAndUsage>
<Description>Promethazine hydrochloride injection, USP is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine hydrochloride (10H-phenothiazine-10-ethanamine, N, N, α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula. Each mL contains promethazine hydrochloride, either 25 mg or 50 mg, edetate disodium 0.1 mg, calcium chloride 0.04 mg, sodium metabisulfite 0.25 mg and phenol 5 mg in Water for Injection, USP. pH 4.0 to 5.5; buffered with acetic acid-sodium acetate. Sealed under nitrogen. Promethazine hydrochloride injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed.</Description>
</NDC>
<NDC>
<NDCCode>0363-9995-30</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (0363-9995-30) / 10 TABLET, CHEWABLE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00363-9995-30</NDC11Code>
<ProductNDC>0363-9995</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wal-itin</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210088</ApplicationNumber>
<LabelerName>WALGREENS CO.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11822-9995-1</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (11822-9995-1) / 6 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11822-9995-01</NDC11Code>
<ProductNDC>11822-9995</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Fexofenadine Hydrochloride 60 Mg</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076502</ApplicationNumber>
<LabelerName>Rite Aid Corporation</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose , 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50436-9995-1</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE (50436-9995-1)</PackageDescription>
<NDC11Code>50436-9995-01</NDC11Code>
<ProductNDC>50436-9995</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Terocin</ProprietaryName>
<NonProprietaryName>Methyl Salicylate, Capsaicin, Menthol And Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>METHYL SALICYLATE; CAPSAICIN; MENTHOL; LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25; .025; 10; 2.5</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temporarily relieves mild aches and pains of muscles or joints.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51754-9995-5</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (51754-9995-5) > 100 mL in 1 VIAL (51754-9995-1) </PackageDescription>
<NDC11Code>51754-9995-05</NDC11Code>
<ProductNDC>51754-9995</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>meq/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71092-9995-1</NDCCode>
<PackageDescription>5 g in 1 CONTAINER (71092-9995-1)</PackageDescription>
<NDC11Code>71092-9995-01</NDC11Code>
<ProductNDC>71092-9995</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Triova Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>71092-9995-2</NDCCode>
<PackageDescription>25 g in 1 CONTAINER (71092-9995-2)</PackageDescription>
<NDC11Code>71092-9995-02</NDC11Code>
<ProductNDC>71092-9995</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Triova Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>71092-9995-3</NDCCode>
<PackageDescription>100 g in 1 CONTAINER (71092-9995-3)</PackageDescription>
<NDC11Code>71092-9995-03</NDC11Code>
<ProductNDC>71092-9995</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Triova Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>71092-9995-4</NDCCode>
<PackageDescription>500 g in 1 CONTAINER (71092-9995-4)</PackageDescription>
<NDC11Code>71092-9995-04</NDC11Code>
<ProductNDC>71092-9995</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Triova Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>