{
"NDC": [
{
"NDCCode": "42023-157-99",
"PackageDescription": "1 VIAL in 1 CARTON (42023-157-99) > 50 mL in 1 VIAL",
"NDC11Code": "42023-0157-99",
"ProductNDC": "42023-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ethacrynate Sodium",
"NonProprietaryName": "Ethacrynate Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160923",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205473",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "ETHACRYNATE SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-14",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Ethacrynate sodium is indicated for treatment of edema when an agent with greater diuretic potential than those commonly employed is required. : 1 1.Treatment of the edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome., 2 2.Short-term management of ascites due to malignancy, idiopathic edema, and lymphedema., 3 3.Short-term management of hospitalized pediatric patients, other than infants, with congenital heart disease or the nephrotic syndrome., 4 4.Intravenous ethacrynate sodium is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema, or when gastrointestinal absorption is impaired or oral medication is not practicable.",
"Description": "Ethacrynic acid is an unsaturated ketone derivative of an aryloxyacetic acid. It is designated chemically as [2,3-dichloro-4-(2- methylene-1-oxobutyl)phenoxy] acetic acid, and has a molecular weight of 303.14. Ethacrynic acid is a white, or practically white, crystalline powder, very slightly soluble in water, but soluble in most organic solvents such as alcohols, chloroform, and benzene. Its empirical formula is C13H12Cl2O4 and its structural formula is. Ethacrynate sodium, the sodium salt of ethacrynic acid, is soluble in water at 25°C to the extent of about 7 percent. Solutions of the sodium salt are relatively stable at about pH 7 at room temperature for short periods, but as the pH or temperature increases the solutions are less stable. The molecular weight of ethacrynate sodium is 325.12. Its empirical formula is C13H11Cl2NaO4 and its structural formula is. Intravenous Ethacrynate Sodium is a sterile freeze-dried powder and is supplied in a vial containing: Ethacrynate sodium equivalent to ethacrynic acid...... 50 mg Inactive ingredient: Mannitol......................62.5 mg."
},
{
"NDCCode": "42023-157-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-157-01) / 50 mL in 1 VIAL",
"NDC11Code": "42023-0157-01",
"ProductNDC": "42023-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ethacrynate Sodium",
"NonProprietaryName": "Ethacrynate Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205473",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ETHACRYNATE SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150730",
"SamplePackage": "N",
"IndicationAndUsage": "Ethacrynate sodium is indicated for treatment of edema when an agent with greater diuretic potential than those commonly employed is required. 1. Treatment of the edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. 2. Short-term management of ascites due to malignancy, idiopathic edema, and lymphedema. 3. Short-term management of hospitalized pediatric patients, other than infants, with congenital heart disease or the nephrotic syndrome. 4. Intravenous ethacrynate sodium is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema, or when gastrointestinal absorption is impaired or oral medication is not practicable.",
"Description": "Ethacrynic acid is an unsaturated ketone derivative of an aryloxyacetic acid. It is designated chemically as [2,3-dichloro-4-(2- methylene-1-oxobutyl)phenoxy] acetic acid, and has a molecular weight of 303.14. Ethacrynic acid is a white, or practically white, crystalline powder, very slightly soluble in water, but soluble in most organic solvents such as alcohols, chloroform, and benzene. Its empirical formula is C13H12Cl2O4 and its structural formula is. Ethacrynate sodium, the sodium salt of ethacrynic acid, is soluble in water at 25°C to the extent of about 7 percent. Solutions of the sodium salt are relatively stable at about pH 7 at room temperature for short periods, but as the pH or temperature increases the solutions are less stable. The molecular weight of ethacrynate sodium is 325.12. Its empirical formula is C13H11Cl2NaO4 and its structural formula is. Intravenous Ethacrynate Sodium is a sterile freeze-dried powder and is supplied in a vial containing: Ethacrynate sodium equivalent to ethacrynic acid...... 50 mg Inactive ingredient: Mannitol......................62.5 mg."
},
{
"NDCCode": "42023-157-89",
"PackageDescription": "1 VIAL in 1 CARTON (42023-157-89) > 50 mL in 1 VIAL",
"NDC11Code": "42023-0157-89",
"ProductNDC": "42023-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ethacrynate Sodium",
"NonProprietaryName": "Ethacrynate Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205473",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "ETHACRYNATE SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-02-21",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231"
},
{
"NDCCode": "42023-168-99",
"PackageDescription": "1 VIAL in 1 CARTON (42023-168-99) / 30 mL in 1 VIAL",
"NDC11Code": "42023-0168-99",
"ProductNDC": "42023-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adrenalin",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20201204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204640",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201204",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.2).",
"Description": "Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 30 mL of solution in a multiple dose amber glass vial. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "42023-243-99",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (42023-243-99) ",
"NDC11Code": "42023-0243-99",
"ProductNDC": "42023-243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ephedrine Sulfate",
"NonProprietaryName": "Ephedrine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213994",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "EPHEDRINE SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240131",
"SamplePackage": "N",
"IndicationAndUsage": "Ephedrine Sulfate Injection is indicated for the treatment of clinically important hypotension occurring in the setting of anesthesia.",
"Description": "Ephedrine is an alpha- and beta-adrenergic agonist and a norepinephrine-releasing agent. Ephedrine Sulfate Injection, 5 mg/mL is a clear, colorless, sterile, ready-to-use solution for intravenous injection. The chemical name of ephedrine sulfate is (1R,2S)-(-)-2-methylamine-1-phenylpropan-1-ol sulfate, and the molecular weight is 428.5 g/mol. Its molecular formula is (C10H15NO)2 · H2SO4 and its structural formula is depicted below. Ephedrine sulfate is freely soluble in water and ethanol, very slightly soluble in chloroform, and practically insoluble in ether. Each mL contains ephedrine sulfate 5 mg (equivalent to 3.8 mg ephedrine base), sodium chloride 9 mg, and sodium hydroxide and/or acetic acid for pH adjustment, if necessary. The pH range is 4.5 to 7.0."
},
{
"NDCCode": "13107-157-99",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (13107-157-99) ",
"NDC11Code": "13107-0157-99",
"ProductNDC": "13107-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paroxetine",
"NonProprietaryName": "Paroxetine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078406",
"LabelerName": "Aurolife Pharma LLC",
"SubstanceName": "PAROXETINE HYDROCHLORIDE HEMIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091203",
"SamplePackage": "N",
"IndicationAndUsage": "Paroxetine tablets are indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).",
"Description": "Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake."
},
{
"NDCCode": "25021-157-99",
"PackageDescription": "1 BOTTLE in 1 CARTON (25021-157-99) / 100 mL in 1 BOTTLE",
"NDC11Code": "25021-0157-99",
"ProductNDC": "25021-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200837",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120920",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of Vancomycin Hydrochloride for Injection, USP may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP is an off white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin Hydrochloride for Injection, USP is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro- 7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.73. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "33261-157-99",
"PackageDescription": "180 TABLET in 1 BOTTLE (33261-157-99)",
"NDC11Code": "33261-0157-99",
"ProductNDC": "33261-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075967",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Metformin hydrochloride tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride, USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride ( N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, and 1000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients povidone, polyethylene glycol and magnesium stearate. In addition, the coating for 500 mg, 850 mg and 1000 mg contains:lactose monohydrate,hypromellose,titanium dioxide,triacetin."
},
{
"NDCCode": "49404-157-99",
"PackageDescription": "1 mL in 1 PACKET (49404-157-99) ",
"NDC11Code": "49404-0157-99",
"ProductNDC": "49404-157",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Premium Beauty Balm Broad Spectrum Spf 30",
"NonProprietaryName": "Octinoxate, Octisalate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260209",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Have & Be Co., Ltd.",
"SubstanceName": "OCTINOXATE; ZINC OXIDE; OCTISALATE; TITANIUM DIOXIDE",
"StrengthNumber": "68; 50; 45; 48",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260209",
"SamplePackage": "Y",
"IndicationAndUsage": "helps prevent sunburn."
},
{
"NDCCode": "57337-157-01",
"PackageDescription": "99 g in 1 CAN (57337-157-01) ",
"NDC11Code": "57337-0157-01",
"ProductNDC": "57337-157",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dry Sweat Shield 3.5oz",
"NonProprietaryName": "Aluminum Chlorohydrate",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231213",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Rejoice International Corp.",
"SubstanceName": "ALUMINUM CHLOROHYDRATE",
"StrengthNumber": "24.5",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Reduces underarm wetness."
},
{
"NDCCode": "65862-157-99",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (65862-157-99) ",
"NDC11Code": "65862-0157-99",
"ProductNDC": "65862-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paroxetine",
"NonProprietaryName": "Paroxetine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078406",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PAROXETINE HYDROCHLORIDE HEMIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070725",
"SamplePackage": "N",
"IndicationAndUsage": "Paroxetine tablets are indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).",
"Description": "Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake."
},
{
"NDCCode": "51887-100-07",
"PackageDescription": "157 L in 1 DEWAR (51887-100-07)",
"NDC11Code": "51887-0100-07",
"ProductNDC": "51887-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrogen",
"NonProprietaryName": "Nitrogen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19360101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Maine Oxy Acetylene Supply Co., Inc.",
"SubstanceName": "NITROGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "53742-001-06",
"PackageDescription": "157 L in 1 DEWAR (53742-001-06)",
"NDC11Code": "53742-0001-06",
"ProductNDC": "53742-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19991221",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Cumberland Medical Center- Medical Equipment Services",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54340-157-01",
"PackageDescription": "221 mL in 1 BOTTLE, DISPENSING (54340-157-01) ",
"NDC11Code": "54340-0157-01",
"ProductNDC": "54340-157",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Complete 2in1 Fhw Manuka Honey",
"NonProprietaryName": "Dial Complete 2in1 Fhw Manuka Honey",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Henkel Corporation",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200501",
"SamplePackage": "N",
"IndicationAndUsage": "Kills 99.99% bacteria. For handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "55151-123-08",
"PackageDescription": "157 L in 1 CYLINDER (55151-123-08) ",
"NDC11Code": "55151-0123-08",
"ProductNDC": "55151-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "E-Z Oxygen LLC, dba AO2",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110101",
"SamplePackage": "N"
},
{
"NDCCode": "65162-157-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (65162-157-03) ",
"NDC11Code": "65162-0157-03",
"ProductNDC": "65162-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet Hydrochloride",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204364",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211206",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide."
},
{
"NDCCode": "65162-157-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (65162-157-10) ",
"NDC11Code": "65162-0157-10",
"ProductNDC": "65162-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet Hydrochloride",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204364",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211206",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide."
},
{
"NDCCode": "65162-157-25",
"PackageDescription": "250 TABLET in 1 BOTTLE (65162-157-25) ",
"NDC11Code": "65162-0157-25",
"ProductNDC": "65162-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet Hydrochloride",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204364",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211206",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide."
},
{
"NDCCode": "24357-011-13",
"PackageDescription": "1 KIT in 1 CARTON (24357-011-13) * 1 mL in 1 VIAL (42023-159-25) * 1 mL in 1 PACKET (68599-5804-1) ",
"NDC11Code": "24357-0011-13",
"ProductNDC": "24357-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine Professional",
"NonProprietaryName": "Epinephrine And Isopropyl Alcohol",
"DosageFormName": "KIT",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204200",
"LabelerName": "Focus Health Group",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N"
},
{
"NDCCode": "24357-012-12",
"PackageDescription": "1 KIT in 1 CARTON (24357-012-12) * 1 mL in 1 PACKET (68599-5804-1) * 1 mL in 1 VIAL (42023-159-01) ",
"NDC11Code": "24357-0012-12",
"ProductNDC": "24357-012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine Professional Ems",
"NonProprietaryName": "Epinephrine Convenience Kit",
"DosageFormName": "KIT",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204200",
"LabelerName": "Focus Health Group",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N"
},
{
"NDCCode": "24357-811-20",
"PackageDescription": "1 KIT in 1 KIT (24357-811-20) * 1 mL in 1 VIAL, GLASS (42023-159-25) ",
"NDC11Code": "24357-0811-20",
"ProductNDC": "24357-811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrinesnap-v",
"NonProprietaryName": "Epinephrine Convenience Kit",
"DosageFormName": "KIT",
"StartMarketingDate": "20170505",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "FOCUS HEALTH GROUP",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20170505",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin® is available as a single-use 1 mL vial and a multiple-use 30 mL vial for intramuscular and subcutaneous use. Emergency treatment of allergic reactions (Type I), including anaphylaxis, which may result from allergic reactions to insect stings, biting insects, foods, drugs, sera, diagnostic testing substances and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. The signs and symptoms associated with anaphylaxis include flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with hypotension, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, airway swelling, laryngospasm, bronchospasm, pruritus, urticaria or angioedema, swelling of the eyelids, lips, and tongue.",
"Description": "Adrenalin® (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL (1:1000) epinephrine, packaged as 1 mL of solution in a singleuse clear glass vial or 30 mL of solution in a multiple-dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is:. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "42023-104-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-104-01) / 1 mL in 1 VIAL",
"NDC11Code": "42023-0104-01",
"ProductNDC": "42023-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aplisol",
"NonProprietaryName": "Tuberculin Purified Protein Derivative",
"DosageFormName": "INJECTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "20080425",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103782",
"LabelerName": "ENDO USA, Inc.",
"SubstanceName": "TUBERCULIN PURIFIED PROTEIN DERIVATIVE",
"StrengthNumber": "5",
"StrengthUnit": "[iU]/.1mL",
"Pharm_Classes": "Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080425",
"SamplePackage": "N",
"IndicationAndUsage": "Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.",
"Description": "Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs."
},
{
"NDCCode": "42023-104-05",
"PackageDescription": "1 VIAL in 1 CARTON (42023-104-05) / 5 mL in 1 VIAL",
"NDC11Code": "42023-0104-05",
"ProductNDC": "42023-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aplisol",
"NonProprietaryName": "Tuberculin Purified Protein Derivative",
"DosageFormName": "INJECTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "20080425",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103782",
"LabelerName": "ENDO USA, Inc.",
"SubstanceName": "TUBERCULIN PURIFIED PROTEIN DERIVATIVE",
"StrengthNumber": "5",
"StrengthUnit": "[iU]/.1mL",
"Pharm_Classes": "Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080425",
"SamplePackage": "N",
"IndicationAndUsage": "Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.",
"Description": "Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs."
},
{
"NDCCode": "42023-105-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-105-01) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "42023-0105-01",
"ProductNDC": "42023-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brevital Sodium",
"NonProprietaryName": "Methohexital Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; RECTAL",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011559",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "METHOHEXITAL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N",
"IndicationAndUsage": "BREVITAL can be used in adults as follows. 1. For intravenous induction of anesthesia prior to the use of other general anesthetic agents. 2. For intravenous induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for short surgical procedures; BREVITAL may be given by infusion or intermittent injection. 3. For use along with other parenteral agents, usually narcotic analgesics, to supplement subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for longer surgical procedures. 4. As intravenous anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli (see WARNINGS). 5. As an agent for inducing a hypnotic state. BREVITAL can be used in pediatric patients older than 1 month as follows. 1. For rectal or intramuscular induction of anesthesia prior to the use of other general anesthetic agents. 2. For rectal or intramuscular induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents for short surgical procedures. 3. As rectal or intramuscular anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli.",
"Description": "BREVITAL® (methohexital sodium, USP) for injection, is 2,4,6 (1H, 3H, 5H)-Pyrimidinetrione, 1-methyl-5-(1-methyl-2-pentynyl)-5-(2-propenyl)-, (±)-, monosodium salt and has the empirical formula C14H17N2NaO3. Its molecular weight is 284.29. The structural formula is as follows. Methohexital sodium is a rapid, ultrashort-acting barbiturate anesthetic. Methohexital sodium for injection is a freeze-dried, sterile, nonpyrogenic mixture of methohexital sodium with 6% anhydrous sodium carbonate added as a buffer. It contains not less than 90% and not more than 110% of the labeled amount of methohexital sodium. It occurs as a white, freeze-dried plug that is freely soluble in water. This product is oxygen sensitive. The pH of the 1% solution is between 10 and 11; the pH of the 0.2% solution in 5% dextrose is between 9.5 and 10.5. Methohexital sodium may be administered by direct intravenous injection or continuous intravenous drip, intramuscular or rectal routes (see PRECAUTIONS/Pediatric Use). Reconstituting instructions vary depending on the route of administration (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "42023-106-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-106-01) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "42023-0106-01",
"ProductNDC": "42023-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brevital Sodium",
"NonProprietaryName": "Methohexital Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; RECTAL",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20210131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011559",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "METHOHEXITAL SODIUM",
"StrengthNumber": "2.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Barbiturate [EPC],Barbiturates [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2021-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20210131",
"SamplePackage": "N"
},
{
"NDCCode": "42023-107-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-107-01) / 2 mL in 1 VIAL",
"NDC11Code": "42023-0107-01",
"ProductNDC": "42023-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin",
"ProprietaryNameSuffix": "M",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20270531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050108",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20270531",
"SamplePackage": "N",
"IndicationAndUsage": "Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below."
},
{
"NDCCode": "42023-107-06",
"PackageDescription": "6 VIAL in 1 CARTON (42023-107-06) > 2 mL in 1 VIAL",
"NDC11Code": "42023-0107-06",
"ProductNDC": "42023-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin",
"ProprietaryNameSuffix": "M",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050108",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20221031",
"SamplePackage": "N",
"IndicationAndUsage": "Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below."
},
{
"NDCCode": "42023-108-01",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (42023-108-01)",
"NDC11Code": "42023-0108-01",
"ProductNDC": "42023-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin S",
"NonProprietaryName": "Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide And Hydrocortisone Acetate",
"DosageFormName": "SUSPENSION",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20170618",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050356",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE",
"StrengthNumber": "3; 3.3; .5; 10",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-06-21"
},
{
"NDCCode": "42023-109-01",
"PackageDescription": "10 mL in 1 BOTTLE, DROPPER (42023-109-01) ",
"NDC11Code": "42023-0109-01",
"ProductNDC": "42023-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cortisporin-tc",
"NonProprietaryName": "Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide, And Hydrocortisone Acetate",
"DosageFormName": "SUSPENSION",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050356",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE",
"StrengthNumber": "3; 3.3; .5; 10",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N"
},
{
"NDCCode": "42023-110-01",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (42023-110-01) ",
"NDC11Code": "42023-0110-01",
"ProductNDC": "42023-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Delestrogen",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009402",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N",
"IndicationAndUsage": "DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).",
"Description": "DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42023-157-99</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-157-99) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0157-99</NDC11Code>
<ProductNDC>42023-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ethacrynate Sodium</ProprietaryName>
<NonProprietaryName>Ethacrynate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160923</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205473</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ETHACRYNATE SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-14</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ethacrynate sodium is indicated for treatment of edema when an agent with greater diuretic potential than those commonly employed is required. : 1 1.Treatment of the edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome., 2 2.Short-term management of ascites due to malignancy, idiopathic edema, and lymphedema., 3 3.Short-term management of hospitalized pediatric patients, other than infants, with congenital heart disease or the nephrotic syndrome., 4 4.Intravenous ethacrynate sodium is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema, or when gastrointestinal absorption is impaired or oral medication is not practicable.</IndicationAndUsage>
<Description>Ethacrynic acid is an unsaturated ketone derivative of an aryloxyacetic acid. It is designated chemically as [2,3-dichloro-4-(2- methylene-1-oxobutyl)phenoxy] acetic acid, and has a molecular weight of 303.14. Ethacrynic acid is a white, or practically white, crystalline powder, very slightly soluble in water, but soluble in most organic solvents such as alcohols, chloroform, and benzene. Its empirical formula is C13H12Cl2O4 and its structural formula is. Ethacrynate sodium, the sodium salt of ethacrynic acid, is soluble in water at 25°C to the extent of about 7 percent. Solutions of the sodium salt are relatively stable at about pH 7 at room temperature for short periods, but as the pH or temperature increases the solutions are less stable. The molecular weight of ethacrynate sodium is 325.12. Its empirical formula is C13H11Cl2NaO4 and its structural formula is. Intravenous Ethacrynate Sodium is a sterile freeze-dried powder and is supplied in a vial containing: Ethacrynate sodium equivalent to ethacrynic acid...... 50 mg Inactive ingredient: Mannitol......................62.5 mg.</Description>
</NDC>
<NDC>
<NDCCode>42023-157-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-157-01) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0157-01</NDC11Code>
<ProductNDC>42023-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ethacrynate Sodium</ProprietaryName>
<NonProprietaryName>Ethacrynate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205473</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ETHACRYNATE SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ethacrynate sodium is indicated for treatment of edema when an agent with greater diuretic potential than those commonly employed is required. 1. Treatment of the edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. 2. Short-term management of ascites due to malignancy, idiopathic edema, and lymphedema. 3. Short-term management of hospitalized pediatric patients, other than infants, with congenital heart disease or the nephrotic syndrome. 4. Intravenous ethacrynate sodium is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema, or when gastrointestinal absorption is impaired or oral medication is not practicable.</IndicationAndUsage>
<Description>Ethacrynic acid is an unsaturated ketone derivative of an aryloxyacetic acid. It is designated chemically as [2,3-dichloro-4-(2- methylene-1-oxobutyl)phenoxy] acetic acid, and has a molecular weight of 303.14. Ethacrynic acid is a white, or practically white, crystalline powder, very slightly soluble in water, but soluble in most organic solvents such as alcohols, chloroform, and benzene. Its empirical formula is C13H12Cl2O4 and its structural formula is. Ethacrynate sodium, the sodium salt of ethacrynic acid, is soluble in water at 25°C to the extent of about 7 percent. Solutions of the sodium salt are relatively stable at about pH 7 at room temperature for short periods, but as the pH or temperature increases the solutions are less stable. The molecular weight of ethacrynate sodium is 325.12. Its empirical formula is C13H11Cl2NaO4 and its structural formula is. Intravenous Ethacrynate Sodium is a sterile freeze-dried powder and is supplied in a vial containing: Ethacrynate sodium equivalent to ethacrynic acid...... 50 mg Inactive ingredient: Mannitol......................62.5 mg.</Description>
</NDC>
<NDC>
<NDCCode>42023-157-89</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-157-89) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0157-89</NDC11Code>
<ProductNDC>42023-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ethacrynate Sodium</ProprietaryName>
<NonProprietaryName>Ethacrynate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205473</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ETHACRYNATE SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-02-21</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>42023-168-99</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-168-99) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0168-99</NDC11Code>
<ProductNDC>42023-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adrenalin</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20201204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204640</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.2).</IndicationAndUsage>
<Description>Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 30 mL of solution in a multiple dose amber glass vial. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>42023-243-99</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (42023-243-99) </PackageDescription>
<NDC11Code>42023-0243-99</NDC11Code>
<ProductNDC>42023-243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ephedrine Sulfate</ProprietaryName>
<NonProprietaryName>Ephedrine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240131</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213994</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>EPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ephedrine Sulfate Injection is indicated for the treatment of clinically important hypotension occurring in the setting of anesthesia.</IndicationAndUsage>
<Description>Ephedrine is an alpha- and beta-adrenergic agonist and a norepinephrine-releasing agent. Ephedrine Sulfate Injection, 5 mg/mL is a clear, colorless, sterile, ready-to-use solution for intravenous injection. The chemical name of ephedrine sulfate is (1R,2S)-(-)-2-methylamine-1-phenylpropan-1-ol sulfate, and the molecular weight is 428.5 g/mol. Its molecular formula is (C10H15NO)2 · H2SO4 and its structural formula is depicted below. Ephedrine sulfate is freely soluble in water and ethanol, very slightly soluble in chloroform, and practically insoluble in ether. Each mL contains ephedrine sulfate 5 mg (equivalent to 3.8 mg ephedrine base), sodium chloride 9 mg, and sodium hydroxide and/or acetic acid for pH adjustment, if necessary. The pH range is 4.5 to 7.0.</Description>
</NDC>
<NDC>
<NDCCode>13107-157-99</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (13107-157-99) </PackageDescription>
<NDC11Code>13107-0157-99</NDC11Code>
<ProductNDC>13107-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paroxetine</ProprietaryName>
<NonProprietaryName>Paroxetine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078406</ApplicationNumber>
<LabelerName>Aurolife Pharma LLC</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
<Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>25021-157-99</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (25021-157-99) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>25021-0157-99</NDC11Code>
<ProductNDC>25021-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200837</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection, USP has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of Vancomycin Hydrochloride for Injection, USP may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is an off white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin Hydrochloride for Injection, USP is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro- 7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.73. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>33261-157-99</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (33261-157-99)</PackageDescription>
<NDC11Code>33261-0157-99</NDC11Code>
<ProductNDC>33261-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075967</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metformin hydrochloride tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride, USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride ( N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, and 1000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients povidone, polyethylene glycol and magnesium stearate. In addition, the coating for 500 mg, 850 mg and 1000 mg contains:lactose monohydrate,hypromellose,titanium dioxide,triacetin.</Description>
</NDC>
<NDC>
<NDCCode>49404-157-99</NDCCode>
<PackageDescription>1 mL in 1 PACKET (49404-157-99) </PackageDescription>
<NDC11Code>49404-0157-99</NDC11Code>
<ProductNDC>49404-157</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Premium Beauty Balm Broad Spectrum Spf 30</ProprietaryName>
<NonProprietaryName>Octinoxate, Octisalate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Have & Be Co., Ltd.</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE; OCTISALATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>68; 50; 45; 48</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260209</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57337-157-01</NDCCode>
<PackageDescription>99 g in 1 CAN (57337-157-01) </PackageDescription>
<NDC11Code>57337-0157-01</NDC11Code>
<ProductNDC>57337-157</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dry Sweat Shield 3.5oz</ProprietaryName>
<NonProprietaryName>Aluminum Chlorohydrate</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Rejoice International Corp.</LabelerName>
<SubstanceName>ALUMINUM CHLOROHYDRATE</SubstanceName>
<StrengthNumber>24.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65862-157-99</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (65862-157-99) </PackageDescription>
<NDC11Code>65862-0157-99</NDC11Code>
<ProductNDC>65862-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paroxetine</ProprietaryName>
<NonProprietaryName>Paroxetine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078406</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of: : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
<Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>51887-100-07</NDCCode>
<PackageDescription>157 L in 1 DEWAR (51887-100-07)</PackageDescription>
<NDC11Code>51887-0100-07</NDC11Code>
<ProductNDC>51887-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrogen</ProprietaryName>
<NonProprietaryName>Nitrogen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19360101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Maine Oxy Acetylene Supply Co., Inc.</LabelerName>
<SubstanceName>NITROGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>53742-001-06</NDCCode>
<PackageDescription>157 L in 1 DEWAR (53742-001-06)</PackageDescription>
<NDC11Code>53742-0001-06</NDC11Code>
<ProductNDC>53742-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19991221</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Cumberland Medical Center- Medical Equipment Services</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54340-157-01</NDCCode>
<PackageDescription>221 mL in 1 BOTTLE, DISPENSING (54340-157-01) </PackageDescription>
<NDC11Code>54340-0157-01</NDC11Code>
<ProductNDC>54340-157</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Complete 2in1 Fhw Manuka Honey</ProprietaryName>
<NonProprietaryName>Dial Complete 2in1 Fhw Manuka Honey</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Henkel Corporation</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Kills 99.99% bacteria. For handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55151-123-08</NDCCode>
<PackageDescription>157 L in 1 CYLINDER (55151-123-08) </PackageDescription>
<NDC11Code>55151-0123-08</NDC11Code>
<ProductNDC>55151-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>E-Z Oxygen LLC, dba AO2</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-157-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (65162-157-03) </PackageDescription>
<NDC11Code>65162-0157-03</NDC11Code>
<ProductNDC>65162-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet Hydrochloride</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204364</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-157-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (65162-157-10) </PackageDescription>
<NDC11Code>65162-0157-10</NDC11Code>
<ProductNDC>65162-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet Hydrochloride</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204364</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65162-157-25</NDCCode>
<PackageDescription>250 TABLET in 1 BOTTLE (65162-157-25) </PackageDescription>
<NDC11Code>65162-0157-25</NDC11Code>
<ProductNDC>65162-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet Hydrochloride</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204364</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablets are a positive modulator of the calcium sensing receptor indicated for: 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1)Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis., 2 Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2), 3 Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline solid that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as green color, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, D&C Yellow #10 aluminum lake, FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (corn), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>24357-011-13</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (24357-011-13) * 1 mL in 1 VIAL (42023-159-25) * 1 mL in 1 PACKET (68599-5804-1) </PackageDescription>
<NDC11Code>24357-0011-13</NDC11Code>
<ProductNDC>24357-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine Professional</ProprietaryName>
<NonProprietaryName>Epinephrine And Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204200</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24357-012-12</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (24357-012-12) * 1 mL in 1 PACKET (68599-5804-1) * 1 mL in 1 VIAL (42023-159-01) </PackageDescription>
<NDC11Code>24357-0012-12</NDC11Code>
<ProductNDC>24357-012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine Professional Ems</ProprietaryName>
<NonProprietaryName>Epinephrine Convenience Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204200</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24357-811-20</NDCCode>
<PackageDescription>1 KIT in 1 KIT (24357-811-20) * 1 mL in 1 VIAL, GLASS (42023-159-25) </PackageDescription>
<NDC11Code>24357-0811-20</NDC11Code>
<ProductNDC>24357-811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrinesnap-v</ProprietaryName>
<NonProprietaryName>Epinephrine Convenience Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170505</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>FOCUS HEALTH GROUP</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin® is available as a single-use 1 mL vial and a multiple-use 30 mL vial for intramuscular and subcutaneous use. Emergency treatment of allergic reactions (Type I), including anaphylaxis, which may result from allergic reactions to insect stings, biting insects, foods, drugs, sera, diagnostic testing substances and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. The signs and symptoms associated with anaphylaxis include flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with hypotension, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, airway swelling, laryngospasm, bronchospasm, pruritus, urticaria or angioedema, swelling of the eyelids, lips, and tongue.</IndicationAndUsage>
<Description>Adrenalin® (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL (1:1000) epinephrine, packaged as 1 mL of solution in a singleuse clear glass vial or 30 mL of solution in a multiple-dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is:. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>42023-104-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-104-01) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0104-01</NDC11Code>
<ProductNDC>42023-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aplisol</ProprietaryName>
<NonProprietaryName>Tuberculin Purified Protein Derivative</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>20080425</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103782</ApplicationNumber>
<LabelerName>ENDO USA, Inc.</LabelerName>
<SubstanceName>TUBERCULIN PURIFIED PROTEIN DERIVATIVE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[iU]/.1mL</StrengthUnit>
<Pharm_Classes>Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.</IndicationAndUsage>
<Description>Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs.</Description>
</NDC>
<NDC>
<NDCCode>42023-104-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-104-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0104-05</NDC11Code>
<ProductNDC>42023-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aplisol</ProprietaryName>
<NonProprietaryName>Tuberculin Purified Protein Derivative</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>20080425</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103782</ApplicationNumber>
<LabelerName>ENDO USA, Inc.</LabelerName>
<SubstanceName>TUBERCULIN PURIFIED PROTEIN DERIVATIVE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[iU]/.1mL</StrengthUnit>
<Pharm_Classes>Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.</IndicationAndUsage>
<Description>Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs.</Description>
</NDC>
<NDC>
<NDCCode>42023-105-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-105-01) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>42023-0105-01</NDC11Code>
<ProductNDC>42023-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brevital Sodium</ProprietaryName>
<NonProprietaryName>Methohexital Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; RECTAL</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011559</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>METHOHEXITAL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREVITAL can be used in adults as follows. 1. For intravenous induction of anesthesia prior to the use of other general anesthetic agents. 2. For intravenous induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for short surgical procedures; BREVITAL may be given by infusion or intermittent injection. 3. For use along with other parenteral agents, usually narcotic analgesics, to supplement subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for longer surgical procedures. 4. As intravenous anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli (see WARNINGS). 5. As an agent for inducing a hypnotic state. BREVITAL can be used in pediatric patients older than 1 month as follows. 1. For rectal or intramuscular induction of anesthesia prior to the use of other general anesthetic agents. 2. For rectal or intramuscular induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents for short surgical procedures. 3. As rectal or intramuscular anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli.</IndicationAndUsage>
<Description>BREVITAL® (methohexital sodium, USP) for injection, is 2,4,6 (1H, 3H, 5H)-Pyrimidinetrione, 1-methyl-5-(1-methyl-2-pentynyl)-5-(2-propenyl)-, (±)-, monosodium salt and has the empirical formula C14H17N2NaO3. Its molecular weight is 284.29. The structural formula is as follows. Methohexital sodium is a rapid, ultrashort-acting barbiturate anesthetic. Methohexital sodium for injection is a freeze-dried, sterile, nonpyrogenic mixture of methohexital sodium with 6% anhydrous sodium carbonate added as a buffer. It contains not less than 90% and not more than 110% of the labeled amount of methohexital sodium. It occurs as a white, freeze-dried plug that is freely soluble in water. This product is oxygen sensitive. The pH of the 1% solution is between 10 and 11; the pH of the 0.2% solution in 5% dextrose is between 9.5 and 10.5. Methohexital sodium may be administered by direct intravenous injection or continuous intravenous drip, intramuscular or rectal routes (see PRECAUTIONS/Pediatric Use). Reconstituting instructions vary depending on the route of administration (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>42023-106-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-106-01) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>42023-0106-01</NDC11Code>
<ProductNDC>42023-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brevital Sodium</ProprietaryName>
<NonProprietaryName>Methohexital Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; RECTAL</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20210131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011559</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>METHOHEXITAL SODIUM</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC],Barbiturates [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20210131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42023-107-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-107-01) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0107-01</NDC11Code>
<ProductNDC>42023-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin</ProprietaryName>
<ProprietaryNameSuffix>M</ProprietaryNameSuffix>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20270531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050108</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20270531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>42023-107-06</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (42023-107-06) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0107-06</NDC11Code>
<ProductNDC>42023-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin</ProprietaryName>
<ProprietaryNameSuffix>M</ProprietaryNameSuffix>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050108</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20221031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>42023-108-01</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (42023-108-01)</PackageDescription>
<NDC11Code>42023-0108-01</NDC11Code>
<ProductNDC>42023-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin S</ProprietaryName>
<NonProprietaryName>Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide And Hydrocortisone Acetate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20170618</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050356</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE</SubstanceName>
<StrengthNumber>3; 3.3; .5; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-06-21</LastUpdate>
</NDC>
<NDC>
<NDCCode>42023-109-01</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, DROPPER (42023-109-01) </PackageDescription>
<NDC11Code>42023-0109-01</NDC11Code>
<ProductNDC>42023-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cortisporin-tc</ProprietaryName>
<NonProprietaryName>Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide, And Hydrocortisone Acetate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050356</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE</SubstanceName>
<StrengthNumber>3; 3.3; .5; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42023-110-01</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (42023-110-01) </PackageDescription>
<NDC11Code>42023-0110-01</NDC11Code>
<ProductNDC>42023-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Delestrogen</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009402</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
<Description>DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.</Description>
</NDC>
</NDCList>