{
"NDC": [
{
"NDCCode": "42023-182-89",
"PackageDescription": "1 VIAL in 1 CARTON (42023-182-89) / 2.5 mL in 1 VIAL",
"NDC11Code": "42023-0182-89",
"ProductNDC": "42023-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Argatroban",
"NonProprietaryName": "Argatroban",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091665",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ARGATROBAN",
"StrengthNumber": "250",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150601",
"SamplePackage": "N",
"IndicationAndUsage": "Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1), 2 As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).",
"Description": "Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5S∙H2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection, USP is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-use amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection."
},
{
"NDCCode": "42023-182-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-182-01) / 2.5 mL in 1 VIAL",
"NDC11Code": "42023-0182-01",
"ProductNDC": "42023-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Argatroban",
"NonProprietaryName": "Argatroban",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091665",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ARGATROBAN",
"StrengthNumber": "250",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150601",
"SamplePackage": "N",
"IndicationAndUsage": "Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1), 2 As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).",
"Description": "Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5S∙H2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection, USP is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-use amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection."
},
{
"NDCCode": "42023-129-89",
"PackageDescription": "1 VIAL in 1 CARTON (42023-129-89) / 5 mL in 1 VIAL",
"NDC11Code": "42023-0129-89",
"ProductNDC": "42023-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Decanoate",
"NonProprietaryName": "Fluphenazine Decanoate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20180626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203732",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "FLUPHENAZINE DECANOATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180626",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine Decanoate Injection is a long-acting parenteral antipsychotic drug intended for use in the management of patients requiring prolonged parenteral neuroleptic therapy (e.g., chronic schizophrenics). Fluphenazine Decanoate Injection has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine decanoate is the decanoate ester of a trifluoromethyl phenothiazine derivative. It is a highly potent behavior modifier with a markedly extended duration of effect and has the following structural formula. Fluphenazine Decanoate Injection, USP is available as a clear, pale yellow solution for intramuscular (IM) or subcutaneous (SC) use providing 25 mg fluphenazine decanoate per mL in a sesame oil vehicle with 12 mg benzyl alcohol as a preservative."
},
{
"NDCCode": "42023-157-89",
"PackageDescription": "1 VIAL in 1 CARTON (42023-157-89) > 50 mL in 1 VIAL",
"NDC11Code": "42023-0157-89",
"ProductNDC": "42023-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ethacrynate Sodium",
"NonProprietaryName": "Ethacrynate Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205473",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "ETHACRYNATE SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-02-21",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231"
},
{
"NDCCode": "42023-168-89",
"PackageDescription": "1 VIAL in 1 CARTON (42023-168-89) / 30 mL in 1 VIAL",
"NDC11Code": "42023-0168-89",
"ProductNDC": "42023-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adrenalin",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20201204",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204640",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201204",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.2).",
"Description": "Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 30 mL of solution in a multiple dose amber glass vial. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "42023-221-85",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 PACKAGE (42023-221-85) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (42023-221-89) ",
"NDC11Code": "42023-0221-85",
"ProductNDC": "42023-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ertapenem",
"NonProprietaryName": "Ertapenem Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021337",
"LabelerName": "ENDO USA, Inc.",
"SubstanceName": "ERTAPENEM SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Ertapenem for injection is a penem antibacterial indicated in adult patients and pediatric patients (3 months of age and older) for the treatment of the following moderate to severe infections caused by susceptible bacteria: 1 Complicated intra-abdominal infections. (1.1), 2 Complicated skin and skin structure infections, including diabetic foot infections without osteomyelitis. (1.2), 3 Community-acquired pneumonia. (1.3), 4 Complicated urinary tract infections including pyelonephritis. (1.4), 5 Acute pelvic infections including postpartum endomyometritis, septic abortion and post-surgical gynecologic infections. (1.5).",
"Description": "Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3-carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C22H24N3O7SNa, and its structural formula is. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for injection is supplied as sterile, white to yellowish off-white lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1 gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of ertapenem for injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5."
},
{
"NDCCode": "42023-146-25",
"PackageDescription": "25 VIAL in 1 CARTON (42023-146-25) / 2 mL in 1 VIAL",
"NDC11Code": "42023-0146-25",
"ProductNDC": "42023-146",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203972",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140819",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).",
"Description": "Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "42023-186-20",
"PackageDescription": "20 VIAL in 1 CARTON (42023-186-20) / 50 mL in 1 VIAL",
"NDC11Code": "42023-0186-20",
"ProductNDC": "42023-186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208266",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201204",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).",
"Description": "Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "42023-187-10",
"PackageDescription": "10 VIAL in 1 CARTON (42023-187-10) / 100 mL in 1 VIAL",
"NDC11Code": "42023-0187-10",
"ProductNDC": "42023-187",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208266",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201204",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).",
"Description": "Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "0173-0874-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0874-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0874-10",
"ProductNDC": "0173-0874",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0874-14",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0874-14) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0874-14",
"ProductNDC": "0173-0874",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0876-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0876-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0876-10",
"ProductNDC": "0173-0876",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0876-14",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0876-14) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0876-14",
"ProductNDC": "0173-0876",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0888-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0888-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0888-10",
"ProductNDC": "0173-0888",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180517",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180517",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "21130-751-09",
"PackageDescription": "89 mL in 1 TUBE (21130-751-09) ",
"NDC11Code": "21130-0751-09",
"ProductNDC": "21130-751",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Open Nature Zinc Oxide Sunscreen Mineral Sunscreen Spf 30",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181205",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Safeway, Inc.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "182.4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181205",
"SamplePackage": "N",
"IndicationAndUsage": " helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "36800-260-09",
"PackageDescription": "89 mL in 1 TUBE (36800-260-09) ",
"NDC11Code": "36800-0260-09",
"ProductNDC": "36800-260",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Topcare Everyday Mineral Sunscreen Zinc Oxide Spf 30",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201202",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "TOPCO ASSOCIATES LLC",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "182.4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201202",
"SamplePackage": "N",
"IndicationAndUsage": " helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "69842-481-09",
"PackageDescription": "89 mL in 1 TUBE (69842-481-09) ",
"NDC11Code": "69842-0481-09",
"ProductNDC": "69842-481",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Health 30 Zinc Sheer",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171204",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CVS PHARMACY",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "182.4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171204",
"SamplePackage": "N",
"IndicationAndUsage": " helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "24357-011-13",
"PackageDescription": "1 KIT in 1 CARTON (24357-011-13) * 1 mL in 1 VIAL (42023-159-25) * 1 mL in 1 PACKET (68599-5804-1) ",
"NDC11Code": "24357-0011-13",
"ProductNDC": "24357-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine Professional",
"NonProprietaryName": "Epinephrine And Isopropyl Alcohol",
"DosageFormName": "KIT",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204200",
"LabelerName": "Focus Health Group",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N"
},
{
"NDCCode": "24357-012-12",
"PackageDescription": "1 KIT in 1 CARTON (24357-012-12) * 1 mL in 1 PACKET (68599-5804-1) * 1 mL in 1 VIAL (42023-159-01) ",
"NDC11Code": "24357-0012-12",
"ProductNDC": "24357-012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine Professional Ems",
"NonProprietaryName": "Epinephrine Convenience Kit",
"DosageFormName": "KIT",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204200",
"LabelerName": "Focus Health Group",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N"
},
{
"NDCCode": "24357-811-20",
"PackageDescription": "1 KIT in 1 KIT (24357-811-20) * 1 mL in 1 VIAL, GLASS (42023-159-25) ",
"NDC11Code": "24357-0811-20",
"ProductNDC": "24357-811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrinesnap-v",
"NonProprietaryName": "Epinephrine Convenience Kit",
"DosageFormName": "KIT",
"StartMarketingDate": "20170505",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "FOCUS HEALTH GROUP",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20170505",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin® is available as a single-use 1 mL vial and a multiple-use 30 mL vial for intramuscular and subcutaneous use. Emergency treatment of allergic reactions (Type I), including anaphylaxis, which may result from allergic reactions to insect stings, biting insects, foods, drugs, sera, diagnostic testing substances and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. The signs and symptoms associated with anaphylaxis include flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with hypotension, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, airway swelling, laryngospasm, bronchospasm, pruritus, urticaria or angioedema, swelling of the eyelids, lips, and tongue.",
"Description": "Adrenalin® (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL (1:1000) epinephrine, packaged as 1 mL of solution in a singleuse clear glass vial or 30 mL of solution in a multiple-dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is:. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "42023-104-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-104-01) / 1 mL in 1 VIAL",
"NDC11Code": "42023-0104-01",
"ProductNDC": "42023-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aplisol",
"NonProprietaryName": "Tuberculin Purified Protein Derivative",
"DosageFormName": "INJECTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "20080425",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103782",
"LabelerName": "ENDO USA, Inc.",
"SubstanceName": "TUBERCULIN PURIFIED PROTEIN DERIVATIVE",
"StrengthNumber": "5",
"StrengthUnit": "[iU]/.1mL",
"Pharm_Classes": "Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080425",
"SamplePackage": "N",
"IndicationAndUsage": "Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.",
"Description": "Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs."
},
{
"NDCCode": "42023-104-05",
"PackageDescription": "1 VIAL in 1 CARTON (42023-104-05) / 5 mL in 1 VIAL",
"NDC11Code": "42023-0104-05",
"ProductNDC": "42023-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aplisol",
"NonProprietaryName": "Tuberculin Purified Protein Derivative",
"DosageFormName": "INJECTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "20080425",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103782",
"LabelerName": "ENDO USA, Inc.",
"SubstanceName": "TUBERCULIN PURIFIED PROTEIN DERIVATIVE",
"StrengthNumber": "5",
"StrengthUnit": "[iU]/.1mL",
"Pharm_Classes": "Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080425",
"SamplePackage": "N",
"IndicationAndUsage": "Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.",
"Description": "Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs."
},
{
"NDCCode": "42023-105-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-105-01) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "42023-0105-01",
"ProductNDC": "42023-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brevital Sodium",
"NonProprietaryName": "Methohexital Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; RECTAL",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011559",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "METHOHEXITAL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N",
"IndicationAndUsage": "BREVITAL can be used in adults as follows. 1. For intravenous induction of anesthesia prior to the use of other general anesthetic agents. 2. For intravenous induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for short surgical procedures; BREVITAL may be given by infusion or intermittent injection. 3. For use along with other parenteral agents, usually narcotic analgesics, to supplement subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for longer surgical procedures. 4. As intravenous anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli (see WARNINGS). 5. As an agent for inducing a hypnotic state. BREVITAL can be used in pediatric patients older than 1 month as follows. 1. For rectal or intramuscular induction of anesthesia prior to the use of other general anesthetic agents. 2. For rectal or intramuscular induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents for short surgical procedures. 3. As rectal or intramuscular anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli.",
"Description": "BREVITAL® (methohexital sodium, USP) for injection, is 2,4,6 (1H, 3H, 5H)-Pyrimidinetrione, 1-methyl-5-(1-methyl-2-pentynyl)-5-(2-propenyl)-, (±)-, monosodium salt and has the empirical formula C14H17N2NaO3. Its molecular weight is 284.29. The structural formula is as follows. Methohexital sodium is a rapid, ultrashort-acting barbiturate anesthetic. Methohexital sodium for injection is a freeze-dried, sterile, nonpyrogenic mixture of methohexital sodium with 6% anhydrous sodium carbonate added as a buffer. It contains not less than 90% and not more than 110% of the labeled amount of methohexital sodium. It occurs as a white, freeze-dried plug that is freely soluble in water. This product is oxygen sensitive. The pH of the 1% solution is between 10 and 11; the pH of the 0.2% solution in 5% dextrose is between 9.5 and 10.5. Methohexital sodium may be administered by direct intravenous injection or continuous intravenous drip, intramuscular or rectal routes (see PRECAUTIONS/Pediatric Use). Reconstituting instructions vary depending on the route of administration (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "42023-106-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-106-01) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "42023-0106-01",
"ProductNDC": "42023-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brevital Sodium",
"NonProprietaryName": "Methohexital Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; RECTAL",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20210131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011559",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "METHOHEXITAL SODIUM",
"StrengthNumber": "2.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Barbiturate [EPC],Barbiturates [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2021-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20210131",
"SamplePackage": "N"
},
{
"NDCCode": "42023-107-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-107-01) / 2 mL in 1 VIAL",
"NDC11Code": "42023-0107-01",
"ProductNDC": "42023-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin",
"ProprietaryNameSuffix": "M",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20270531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050108",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20270531",
"SamplePackage": "N",
"IndicationAndUsage": "Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below."
},
{
"NDCCode": "42023-107-06",
"PackageDescription": "6 VIAL in 1 CARTON (42023-107-06) > 2 mL in 1 VIAL",
"NDC11Code": "42023-0107-06",
"ProductNDC": "42023-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin",
"ProprietaryNameSuffix": "M",
"NonProprietaryName": "Colistimethate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050108",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20071101",
"EndMarketingDatePackage": "20221031",
"SamplePackage": "N",
"IndicationAndUsage": "Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below."
},
{
"NDCCode": "42023-108-01",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (42023-108-01)",
"NDC11Code": "42023-0108-01",
"ProductNDC": "42023-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coly-mycin S",
"NonProprietaryName": "Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide And Hydrocortisone Acetate",
"DosageFormName": "SUSPENSION",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20071101",
"EndMarketingDate": "20170618",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050356",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE",
"StrengthNumber": "3; 3.3; .5; 10",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-06-21"
},
{
"NDCCode": "42023-109-01",
"PackageDescription": "10 mL in 1 BOTTLE, DROPPER (42023-109-01) ",
"NDC11Code": "42023-0109-01",
"ProductNDC": "42023-109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cortisporin-tc",
"NonProprietaryName": "Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide, And Hydrocortisone Acetate",
"DosageFormName": "SUSPENSION",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050356",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE",
"StrengthNumber": "3; 3.3; .5; 10",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N"
},
{
"NDCCode": "42023-110-01",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (42023-110-01) ",
"NDC11Code": "42023-0110-01",
"ProductNDC": "42023-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Delestrogen",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009402",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N",
"IndicationAndUsage": "DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).",
"Description": "DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula."
},
{
"NDCCode": "42023-111-01",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (42023-111-01) ",
"NDC11Code": "42023-0111-01",
"ProductNDC": "42023-111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Delestrogen",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20071101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009402",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071101",
"SamplePackage": "N",
"IndicationAndUsage": "DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).",
"Description": "DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42023-182-89</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-182-89) / 2.5 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0182-89</NDC11Code>
<ProductNDC>42023-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Argatroban</ProprietaryName>
<NonProprietaryName>Argatroban</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091665</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ARGATROBAN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1), 2 As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).</IndicationAndUsage>
<Description>Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5S∙H2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection, USP is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-use amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>42023-182-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-182-01) / 2.5 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0182-01</NDC11Code>
<ProductNDC>42023-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Argatroban</ProprietaryName>
<NonProprietaryName>Argatroban</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091665</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ARGATROBAN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Argatroban is a direct thrombin inhibitor indicated: 1 For prophylaxis or treatment of thrombosis in adult patients with heparin-induced thrombocytopenia (HIT) (1.1), 2 As an anticoagulant in adult patients with or at risk for HIT undergoing percutaneous coronary intervention (PCI) (1.2).</IndicationAndUsage>
<Description>Argatroban is a synthetic direct thrombin inhibitor and the chemical name is 1-[5-[(aminoiminomethyl)amino]-1-oxo-2-[[(1,2,3,4-tetrahydro-3-methyl-8-quinolinyl)sulfonyl]amino]pentyl]-4-methyl-2-piperidinecarboxylic acid, monohydrate. Argatroban has 4 asymmetric carbons. One of the asymmetric carbons has an R configuration (stereoisomer Type I) and an S configuration (stereoisomer Type II). Argatroban consists of a mixture of R and S stereoisomers at a ratio of approximately 65:35. The molecular formula of argatroban is C23H36N6O5S∙H2O. Its molecular weight is 526.66 g/mol. The structural formula is. Argatroban is a white, odorless crystalline powder that is freely soluble in glacial acetic acid, slightly soluble in ethanol, and insoluble in acetone, ethyl acetate, and ether. Argatroban Injection, USP is a sterile clear, colorless to pale yellow, slightly viscous solution in a single-use amber vial containing 250 mg/2.5 mL of argatroban. Each mL of sterile, nonpyrogenic solution contains 100 mg argatroban, 300 mg D-sorbitol, and 400 mg dehydrated alcohol in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>42023-129-89</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-129-89) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0129-89</NDC11Code>
<ProductNDC>42023-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Decanoate</ProprietaryName>
<NonProprietaryName>Fluphenazine Decanoate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203732</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>FLUPHENAZINE DECANOATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine Decanoate Injection is a long-acting parenteral antipsychotic drug intended for use in the management of patients requiring prolonged parenteral neuroleptic therapy (e.g., chronic schizophrenics). Fluphenazine Decanoate Injection has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine decanoate is the decanoate ester of a trifluoromethyl phenothiazine derivative. It is a highly potent behavior modifier with a markedly extended duration of effect and has the following structural formula. Fluphenazine Decanoate Injection, USP is available as a clear, pale yellow solution for intramuscular (IM) or subcutaneous (SC) use providing 25 mg fluphenazine decanoate per mL in a sesame oil vehicle with 12 mg benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>42023-157-89</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-157-89) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0157-89</NDC11Code>
<ProductNDC>42023-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ethacrynate Sodium</ProprietaryName>
<NonProprietaryName>Ethacrynate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205473</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ETHACRYNATE SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-02-21</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>42023-168-89</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-168-89) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0168-89</NDC11Code>
<ProductNDC>42023-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adrenalin</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20201204</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204640</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.2).</IndicationAndUsage>
<Description>Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 30 mL of solution in a multiple dose amber glass vial. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>42023-221-85</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 PACKAGE (42023-221-85) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (42023-221-89) </PackageDescription>
<NDC11Code>42023-0221-85</NDC11Code>
<ProductNDC>42023-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ertapenem</ProprietaryName>
<NonProprietaryName>Ertapenem Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021337</ApplicationNumber>
<LabelerName>ENDO USA, Inc.</LabelerName>
<SubstanceName>ERTAPENEM SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ertapenem for injection is a penem antibacterial indicated in adult patients and pediatric patients (3 months of age and older) for the treatment of the following moderate to severe infections caused by susceptible bacteria: 1 Complicated intra-abdominal infections. (1.1), 2 Complicated skin and skin structure infections, including diabetic foot infections without osteomyelitis. (1.2), 3 Community-acquired pneumonia. (1.3), 4 Complicated urinary tract infections including pyelonephritis. (1.4), 5 Acute pelvic infections including postpartum endomyometritis, septic abortion and post-surgical gynecologic infections. (1.5).</IndicationAndUsage>
<Description>Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3-carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C22H24N3O7SNa, and its structural formula is. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for injection is supplied as sterile, white to yellowish off-white lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1 gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of ertapenem for injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>42023-146-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (42023-146-25) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0146-25</NDC11Code>
<ProductNDC>42023-146</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203972</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>42023-186-20</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (42023-186-20) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0186-20</NDC11Code>
<ProductNDC>42023-186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208266</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>42023-187-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (42023-187-10) / 100 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0187-10</NDC11Code>
<ProductNDC>42023-187</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208266</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine hydrochloride in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers. Dexmedetomidine Hydrochloride in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>0173-0874-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0874-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0874-10</NDC11Code>
<ProductNDC>0173-0874</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0874-14</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0874-14) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0874-14</NDC11Code>
<ProductNDC>0173-0874</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0876-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0876-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0876-10</NDC11Code>
<ProductNDC>0173-0876</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0876-14</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0876-14) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0876-14</NDC11Code>
<ProductNDC>0173-0876</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0888-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0888-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0888-10</NDC11Code>
<ProductNDC>0173-0888</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180517</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>21130-751-09</NDCCode>
<PackageDescription>89 mL in 1 TUBE (21130-751-09) </PackageDescription>
<NDC11Code>21130-0751-09</NDC11Code>
<ProductNDC>21130-751</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Open Nature Zinc Oxide Sunscreen Mineral Sunscreen Spf 30</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181205</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Safeway, Inc.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>182.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-260-09</NDCCode>
<PackageDescription>89 mL in 1 TUBE (36800-260-09) </PackageDescription>
<NDC11Code>36800-0260-09</NDC11Code>
<ProductNDC>36800-260</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Topcare Everyday Mineral Sunscreen Zinc Oxide Spf 30</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201202</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>TOPCO ASSOCIATES LLC</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>182.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69842-481-09</NDCCode>
<PackageDescription>89 mL in 1 TUBE (69842-481-09) </PackageDescription>
<NDC11Code>69842-0481-09</NDC11Code>
<ProductNDC>69842-481</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Health 30 Zinc Sheer</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171204</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CVS PHARMACY</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>182.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> helps prevent sunburn if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24357-011-13</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (24357-011-13) * 1 mL in 1 VIAL (42023-159-25) * 1 mL in 1 PACKET (68599-5804-1) </PackageDescription>
<NDC11Code>24357-0011-13</NDC11Code>
<ProductNDC>24357-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine Professional</ProprietaryName>
<NonProprietaryName>Epinephrine And Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204200</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24357-012-12</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (24357-012-12) * 1 mL in 1 PACKET (68599-5804-1) * 1 mL in 1 VIAL (42023-159-01) </PackageDescription>
<NDC11Code>24357-0012-12</NDC11Code>
<ProductNDC>24357-012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine Professional Ems</ProprietaryName>
<NonProprietaryName>Epinephrine Convenience Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204200</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24357-811-20</NDCCode>
<PackageDescription>1 KIT in 1 KIT (24357-811-20) * 1 mL in 1 VIAL, GLASS (42023-159-25) </PackageDescription>
<NDC11Code>24357-0811-20</NDC11Code>
<ProductNDC>24357-811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrinesnap-v</ProprietaryName>
<NonProprietaryName>Epinephrine Convenience Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170505</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>FOCUS HEALTH GROUP</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin® is available as a single-use 1 mL vial and a multiple-use 30 mL vial for intramuscular and subcutaneous use. Emergency treatment of allergic reactions (Type I), including anaphylaxis, which may result from allergic reactions to insect stings, biting insects, foods, drugs, sera, diagnostic testing substances and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. The signs and symptoms associated with anaphylaxis include flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with hypotension, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, airway swelling, laryngospasm, bronchospasm, pruritus, urticaria or angioedema, swelling of the eyelids, lips, and tongue.</IndicationAndUsage>
<Description>Adrenalin® (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL (1:1000) epinephrine, packaged as 1 mL of solution in a singleuse clear glass vial or 30 mL of solution in a multiple-dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin® solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is:. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>42023-104-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-104-01) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0104-01</NDC11Code>
<ProductNDC>42023-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aplisol</ProprietaryName>
<NonProprietaryName>Tuberculin Purified Protein Derivative</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>20080425</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103782</ApplicationNumber>
<LabelerName>ENDO USA, Inc.</LabelerName>
<SubstanceName>TUBERCULIN PURIFIED PROTEIN DERIVATIVE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[iU]/.1mL</StrengthUnit>
<Pharm_Classes>Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.</IndicationAndUsage>
<Description>Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs.</Description>
</NDC>
<NDC>
<NDCCode>42023-104-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-104-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0104-05</NDC11Code>
<ProductNDC>42023-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aplisol</ProprietaryName>
<NonProprietaryName>Tuberculin Purified Protein Derivative</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>20080425</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103782</ApplicationNumber>
<LabelerName>ENDO USA, Inc.</LabelerName>
<SubstanceName>TUBERCULIN PURIFIED PROTEIN DERIVATIVE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[iU]/.1mL</StrengthUnit>
<Pharm_Classes>Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Skin Test Antigen [EPC], Tuberculosis Skin Test [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tuberculin PPD is indicated as an aid in the detection of infection with Mycobacterium tuberculosis. The standard tuberculin test employs the intradermal (Mantoux) test using a 5 TU dose of tuberculin PPD.7 The 0.1 mL test dose of Aplisol (tuberculin PPD, diluted) is equivalent to the 5 TU dose which has been clinically utilized and standardized with PPD-S. Tuberculin skin testing is not contraindicated for persons who have been vaccinated with BCG and the skin-test results of such persons are used to support or exclude the diagnosis of M. tuberculosis infections.4 HIV infection is a strong risk factor for the development of TB disease in persons having TB infection. All HIV-infected persons should receive a PPD-tuberculin skin test.3.</IndicationAndUsage>
<Description>Aplisol (tuberculin PPD, diluted) is a sterile aqueous solution of a purified protein fraction for intradermal administration as an aid in the diagnosis of tuberculosis. The solution is stabilized with polysorbate (Tween) 80, buffered with potassium and sodium phosphates and contains approximately 0.25% phenol as a preservative. This product is ready for immediate use without further dilution. The purified protein fraction is isolated from culture media filtrates of a human strain of Mycobacterium tuberculosis by the method of F.B. Seibert.1,2 Tuberculin PPD, diluted, is prepared from Tuberculin PPD which is clinically bioequivalent in potency to the standard PPD-S* (5 TU** per 0.1mL) of the U.S. Public Health Service, National Centers for Disease Control. The potency of each lot of tuberculin PPD, diluted is determined in sensitized guinea pigs.</Description>
</NDC>
<NDC>
<NDCCode>42023-105-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-105-01) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>42023-0105-01</NDC11Code>
<ProductNDC>42023-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brevital Sodium</ProprietaryName>
<NonProprietaryName>Methohexital Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; RECTAL</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011559</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>METHOHEXITAL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREVITAL can be used in adults as follows. 1. For intravenous induction of anesthesia prior to the use of other general anesthetic agents. 2. For intravenous induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for short surgical procedures; BREVITAL may be given by infusion or intermittent injection. 3. For use along with other parenteral agents, usually narcotic analgesics, to supplement subpotent inhalational anesthetic agents (such as nitrous oxide in oxygen) for longer surgical procedures. 4. As intravenous anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli (see WARNINGS). 5. As an agent for inducing a hypnotic state. BREVITAL can be used in pediatric patients older than 1 month as follows. 1. For rectal or intramuscular induction of anesthesia prior to the use of other general anesthetic agents. 2. For rectal or intramuscular induction of anesthesia and as an adjunct to subpotent inhalational anesthetic agents for short surgical procedures. 3. As rectal or intramuscular anesthesia for short surgical, diagnostic, or therapeutic procedures associated with minimal painful stimuli.</IndicationAndUsage>
<Description>BREVITAL® (methohexital sodium, USP) for injection, is 2,4,6 (1H, 3H, 5H)-Pyrimidinetrione, 1-methyl-5-(1-methyl-2-pentynyl)-5-(2-propenyl)-, (±)-, monosodium salt and has the empirical formula C14H17N2NaO3. Its molecular weight is 284.29. The structural formula is as follows. Methohexital sodium is a rapid, ultrashort-acting barbiturate anesthetic. Methohexital sodium for injection is a freeze-dried, sterile, nonpyrogenic mixture of methohexital sodium with 6% anhydrous sodium carbonate added as a buffer. It contains not less than 90% and not more than 110% of the labeled amount of methohexital sodium. It occurs as a white, freeze-dried plug that is freely soluble in water. This product is oxygen sensitive. The pH of the 1% solution is between 10 and 11; the pH of the 0.2% solution in 5% dextrose is between 9.5 and 10.5. Methohexital sodium may be administered by direct intravenous injection or continuous intravenous drip, intramuscular or rectal routes (see PRECAUTIONS/Pediatric Use). Reconstituting instructions vary depending on the route of administration (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>42023-106-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-106-01) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>42023-0106-01</NDC11Code>
<ProductNDC>42023-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brevital Sodium</ProprietaryName>
<NonProprietaryName>Methohexital Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; RECTAL</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20210131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011559</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>METHOHEXITAL SODIUM</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC],Barbiturates [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20210131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42023-107-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-107-01) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0107-01</NDC11Code>
<ProductNDC>42023-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin</ProprietaryName>
<ProprietaryNameSuffix>M</ProprietaryNameSuffix>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20270531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050108</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20270531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>42023-107-06</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (42023-107-06) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0107-06</NDC11Code>
<ProductNDC>42023-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin</ProprietaryName>
<ProprietaryNameSuffix>M</ProprietaryNameSuffix>
<NonProprietaryName>Colistimethate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050108</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<EndMarketingDatePackage>20221031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Coly-Mycin M Parenteral is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Coly-Mycin M Parenteral has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Coly-Mycin M Parenteral may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Coly-Mycin M and other antibacterial drugs, Coly-Mycin M should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Coly-Mycin® M Parenteral (Colistimethate for Injection, USP) is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The empirical formula is C58H105N16Na5O28S5 and the structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>42023-108-01</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (42023-108-01)</PackageDescription>
<NDC11Code>42023-0108-01</NDC11Code>
<ProductNDC>42023-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coly-mycin S</ProprietaryName>
<NonProprietaryName>Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide And Hydrocortisone Acetate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<EndMarketingDate>20170618</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050356</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE</SubstanceName>
<StrengthNumber>3; 3.3; .5; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-06-21</LastUpdate>
</NDC>
<NDC>
<NDCCode>42023-109-01</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, DROPPER (42023-109-01) </PackageDescription>
<NDC11Code>42023-0109-01</NDC11Code>
<ProductNDC>42023-109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cortisporin-tc</ProprietaryName>
<NonProprietaryName>Colistin Sulfate, Neomycin Sulfate, Thonzonium Bromide, And Hydrocortisone Acetate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050356</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>COLISTIN SULFATE; NEOMYCIN SULFATE; THONZONIUM BROMIDE; HYDROCORTISONE ACETATE</SubstanceName>
<StrengthNumber>3; 3.3; .5; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [CS],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42023-110-01</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (42023-110-01) </PackageDescription>
<NDC11Code>42023-0110-01</NDC11Code>
<ProductNDC>42023-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Delestrogen</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009402</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
<Description>DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.</Description>
</NDC>
<NDC>
<NDCCode>42023-111-01</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (42023-111-01) </PackageDescription>
<NDC11Code>42023-0111-01</NDC11Code>
<ProductNDC>42023-111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Delestrogen</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20071101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009402</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DELESTROGEN (estradiol valerate injection, USP) is indicated in the. 1. Treatment of moderate to severe vasomotor symptoms associated with the menopause. 2. Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. 3. Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. 4. Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
<Description>DELESTROGEN® (estradiol valerate injection, USP) contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 915 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative) and 730 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol and 522 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.</Description>
</NDC>
</NDCList>