{
"NDC": [
{
"NDCCode": "42549-548-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (42549-548-28)",
"NDC11Code": "42549-0548-28",
"ProductNDC": "42549-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem Tartrate",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078616",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.",
"Description": "Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin."
},
{
"NDCCode": "63459-548-28",
"PackageDescription": "28 BLISTER PACK in 1 CARTON (63459-548-28) / 1 TABLET in 1 BLISTER PACK (63459-548-04) ",
"NDC11Code": "63459-0548-28",
"ProductNDC": "63459-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentora",
"NonProprietaryName": "Fentanyl",
"DosageFormName": "TABLET",
"RouteName": "BUCCAL; SUBLINGUAL",
"StartMarketingDate": "20061002",
"EndMarketingDate": "20250831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021947",
"LabelerName": "Cephalon, LLC",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "800",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20061002",
"EndMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "FENTORA is indicated for the management of breakthrough pain in cancer patients 18 years of age and older who are already receiving and who are tolerant to around-the-clock opioid therapy for their underlying persistent cancer pain. Patients considered opioid tolerant are those who are taking, for one week or longer, around-the-clock medicine consisting of at least 60 mg of oral morphine per day, at least 25 mcg of transdermal fentanyl per hour, at least 30 mg of oral oxycodone per day, at least 8 mg of oral hydromorphone per day, at least 25 mg oral oxymorphone per day, at least 60 mg of oral hydrocodone per day, or an equianalgesic dose of another opioid. Patients must remain on around-the-clock opioids while taking FENTORA. Limitations of Use: 1 Not for use in opioid non-tolerant patients., 2 Not for use in the management of acute or postoperative pain, including headache/migraine and dental pain [see Contraindications (4)]., 3 As a part of the TIRF REMS, FENTORA may be dispensed by outpatient pharmacies only to outpatients enrolled in the program [see Warnings and Precautions (5.7)]. For inpatient administration of FENTORA, patient and prescriber enrollment are not required.",
"Description": "FENTORA (fentanyl buccal tablet) is an opioid agonist, intended for buccal mucosal administration. FENTORA is designed to be placed and retained within the buccal cavity for a period sufficient to allow disintegration of the tablet and absorption of fentanyl across the oral mucosa. FENTORA employs the OraVescent® drug delivery technology, which generates a reaction that releases carbon dioxide when the tablet comes in contact with saliva. It is believed that transient pH changes accompanying the reaction may optimize dissolution (at a lower pH) and membrane permeation (at a higher pH) of fentanyl through the buccal mucosa. Active Ingredient: Fentanyl citrate, USP is N-(1-Phenethyl-4-piperidyl) propionanilide citrate (1:1). Fentanyl is a highly lipophilic compound (octanol-water partition coefficient at pH 7.4 is 816:1) that is freely soluble in organic solvents and sparingly soluble in water (1:40). The molecular weight of the free base is 336.5 (the citrate salt is 528.6). The pKa of the tertiary nitrogens are 7.3 and 8.4. The compound has the following structural formula. All tablet strengths are expressed as the amount of fentanyl free base, e.g., the 100 microgram strength tablet contains 100 micrograms of fentanyl free base. Inactive Ingredients: Mannitol, sodium starch glycolate, sodium bicarbonate, sodium carbonate, citric acid, and magnesium stearate."
},
{
"NDCCode": "42549-548-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (42549-548-30)",
"NDC11Code": "42549-0548-30",
"ProductNDC": "42549-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem Tartrate",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078616",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.",
"Description": "Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin."
},
{
"NDCCode": "42549-548-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (42549-548-60)",
"NDC11Code": "42549-0548-60",
"ProductNDC": "42549-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem Tartrate",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078616",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.",
"Description": "Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin."
},
{
"NDCCode": "42549-548-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42549-548-90)",
"NDC11Code": "42549-0548-90",
"ProductNDC": "42549-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem Tartrate",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078616",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.",
"Description": "Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin."
},
{
"NDCCode": "42549-503-28",
"PackageDescription": "28 TABLET in 1 BOTTLE, PLASTIC (42549-503-28)",
"NDC11Code": "42549-0503-28",
"ProductNDC": "42549-503",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19960124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040124",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carisoprodol Tablets are indicated for the relief of discomfort associated with acute, painful musculoskietal conditions in adults. Carisprodol Tablets should only be used for short periods (up to two or three weeks) brcause adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculosketal conditions are generally of short duration [see Dosage and Administration (2)].",
"Description": "Carisoprodol Tablets are available as 350 mg round, white tablets for oral administration. Carisoprodol is a white, crystalline powder, having a mide, characteristic odor and a bitter taste. It is slightly soluble in water; freely soluble in alcohol in chloroform, and in acetone; its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisioprodol is N-isopropyl-2-methyl-2-propyl-1,3- propanediol dicarbamate and the molecular formula is C12H24N2O4, with a molecular weight of 260.33. The structural formula is. Other Ingredients: colloidal silicon dioxide, latose monohydrate, magnesium stearate, microcrystalline cellulose, methylcellulose, povidone, sodium lauryl sulfate, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "42549-512-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (42549-512-28)",
"NDC11Code": "42549-0512-28",
"ProductNDC": "42549-512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20091124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078428",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Postherpetic Neuralgia. Gabapentin Capsules is indicated for the management of postherpetic neuralgia in adults. Epilepsy. Gabapentin Capsules is indicated as adjunctive therapy in the treatment of partial seizures with and without secondary generalization in patients over 12 years of age with epilepsy. Gabapentin Capsules is also indicated as adjunctive therapy in the treatment of partial seizures in pediatric patients age 3 – 12 years.",
"Description": "Gabapentin Capsules are supplied as imprinted hard shell capsules containing 100 mg, 300 mg, and 400 mg of gabapentin. The inactive ingredients for the capsules are magnesium stearate, pregelatinized starch, starch and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and iron oxide yellow. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, FD&C Yellow No.6 and FD&C Blue No.1. Gabapentin is described as 1-(aminomethyl)cyclohexaneacetic acid with a molecular formula of C9H17NO2 and a molecular weight of 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25."
},
{
"NDCCode": "42549-513-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (42549-513-28)",
"NDC11Code": "42549-0513-28",
"ProductNDC": "42549-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20091124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078428",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Postherpetic Neuralgia. Gabapentin Capsules is indicated for the management of postherpetic neuralgia in adults. Epilepsy. Gabapentin Capsules is indicated as adjunctive therapy in the treatment of partial seizures with and without secondary generalization in patients over 12 years of age with epilepsy. Gabapentin Capsules is also indicated as adjunctive therapy in the treatment of partial seizures in pediatric patients age 3 – 12 years.",
"Description": "Gabapentin Capsules are supplied as imprinted hard shell capsules containing 100 mg, 300 mg, and 400 mg of gabapentin. The inactive ingredients for the capsules are magnesium stearate, pregelatinized starch, starch and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and iron oxide yellow. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, FD&C Yellow No.6 and FD&C Blue No.1. Gabapentin is described as 1-(aminomethyl)cyclohexaneacetic acid with a molecular formula of C9H17NO2 and a molecular weight of 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25."
},
{
"NDCCode": "42549-514-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-514-28)",
"NDC11Code": "42549-0514-28",
"ProductNDC": "42549-514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040400",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "10; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42549-516-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-516-28)",
"NDC11Code": "42549-0516-28",
"ProductNDC": "42549-516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040201",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42549-532-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (42549-532-28)",
"NDC11Code": "42549-0532-28",
"ProductNDC": "42549-532",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20010202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065061",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C18H33ClN2O5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "42549-537-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-537-28)",
"NDC11Code": "42549-0537-28",
"ProductNDC": "42549-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076017",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Gabapentin tablets USP are indicated for the management of postherpetic neuralgia in adults.",
"Description": "Gabapentin tablets USP are an anticonvulsant for oral administration. Gabapentin USP is described as 1-(aminomethyl)cyclohexaneacetic acid. Gabapentin USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.25. The structural formula of gabapentin USP is. C9H17NO2 M.W. 171.24. Each gabapentin tablet USP, for oral administration, contains 600 mg or 800 mg of gabapentin USP and contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose and polyethylene glycol."
},
{
"NDCCode": "42549-549-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-549-28)",
"NDC11Code": "42549-0549-28",
"ProductNDC": "42549-549",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076280",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Tizanidine is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).",
"Description": "Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8CIN5SHCl, its molecular weight is 290.2 and its structural formula is. Tizanidine is supplied as 2 and 4 mg tablets for oral administration. Tizanidine Hydrochloride Tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base) and the inactive ingredients, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose and stearic acid."
},
{
"NDCCode": "42549-556-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-556-28)",
"NDC11Code": "42549-0556-28",
"ProductNDC": "42549-556",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040409",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42549-557-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-557-28)",
"NDC11Code": "42549-0557-28",
"ProductNDC": "42549-557",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040405",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42549-565-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (42549-565-28)",
"NDC11Code": "42549-0565-28",
"ProductNDC": "42549-565",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062702",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note—Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules, cephalexin for oral suspension, cephalexin tablets, and other antibacterial drugs, cephalexin capsules, cephalexin for oral suspension, and cephalexin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin has the following structural formula. C16H17N3O4SH2O M.W. 365.41. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "42549-572-28",
"PackageDescription": "28 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-572-28)",
"NDC11Code": "42549-0572-28",
"ProductNDC": "42549-572",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"ProprietaryNameSuffix": "Extended-release",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076412",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).",
"Description": "Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Blue No. 2, and D&C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&C Blue No. 1, and D&C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY."
},
{
"NDCCode": "42549-574-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-574-28)",
"NDC11Code": "42549-0574-28",
"ProductNDC": "42549-574",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078273",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydromorphone hydrochloride tablets USP are indicated for the management of pain in patients where an opioid analgesic is appropriate.",
"Description": "Hydromorphone Hydrochloride Tablets USP, 2 mg, 4 mg, and 8 mg are supplied in tablet form for oral administration. Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid analgesic. The chemical name of hydromorphone hydrochloride tablets USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula of hydromorphone hydrochloride is:. Each Hydromorphone Hydrochloride Tablet USP, 2 mg contains: : 1 Hydromorphone Hydrochloride USP . . . . . . . . . . . . 2 mg ."
},
{
"NDCCode": "42549-577-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-577-28)",
"NDC11Code": "42549-0577-28",
"ProductNDC": "42549-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the treatment of moderate to severe pain not responsive to non-narcotic analgesics. For detoxification treatment of opioid addiction (heroin or other morphine-like drugs). For maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.",
"Description": "Methadone Hydrochloride Tablets USP for oral administration, each contain 5 mg or 10 mg of methadone hydrochloride. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptanone hydrochloride. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. It has the following structural formula. The tablets also contain lactose monohydrate, magnesium stearate, microcrystalline cellulose and silicon dioxide."
},
{
"NDCCode": "42549-578-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-578-28)",
"NDC11Code": "42549-0578-28",
"ProductNDC": "42549-578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040517",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the treatment of moderate to severe pain not responsive to non-narcotic analgesics. For detoxification treatment of opioid addiction (heroin or other morphine-like drugs). For maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.",
"Description": "Methadone Hydrochloride Tablets USP for oral administration, each contain 5 mg or 10 mg of methadone hydrochloride. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptanone hydrochloride. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. It has the following structural formula. The tablets also contain lactose monohydrate, magnesium stearate, microcrystalline cellulose and silicon dioxide."
},
{
"NDCCode": "42549-594-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-594-28)",
"NDC11Code": "42549-0594-28",
"ProductNDC": "42549-594",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078273",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydromorphone hydrochloride tablets USP are indicated for the management of pain in patients where an opioid analgesic is appropriate.",
"Description": "Hydromorphone Hydrochloride Tablets USP, 2 mg, 4 mg, and 8 mg are supplied in tablet form for oral administration. Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid analgesic. The chemical name of hydromorphone hydrochloride tablets USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula of hydromorphone hydrochloride is:. Each Hydromorphone Hydrochloride Tablet USP, 2 mg contains: : 1 Hydromorphone Hydrochloride USP . . . . . . . . . . . . 2 mg ."
},
{
"NDCCode": "42549-597-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-597-28)",
"NDC11Code": "42549-0597-28",
"ProductNDC": "42549-597",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076280",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Tizanidine is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).",
"Description": "Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8CIN5SHCl, its molecular weight is 290.2 and its structural formula is. Tizanidine is supplied as 2 and 4 mg tablets for oral administration. Tizanidine Hydrochloride Tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base) and the inactive ingredients, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose and stearic acid."
},
{
"NDCCode": "42549-602-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-602-28)",
"NDC11Code": "42549-0602-28",
"ProductNDC": "42549-602",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022207",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate tablets contain morphine, an opioid analgesic, indicated for the relief of moderate to severe acute and chronic pain where use of an opioid analgesic is appropriate.",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate with a molecular mass of 758. Morphine sulfate occurs as white, feathery, silky crystals; cubical masses of crystal; or white crystalline powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each tablet contains 15 or 30 mg of morphine sulfate, USP and the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, and stearic acid."
},
{
"NDCCode": "42549-609-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-609-28)",
"NDC11Code": "42549-0609-28",
"ProductNDC": "42549-609",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089160",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42549-614-28",
"PackageDescription": "28 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-614-28)",
"NDC11Code": "42549-0614-28",
"ProductNDC": "42549-614",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"ProprietaryNameSuffix": "Extended-release",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076412",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).",
"Description": "Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Blue No. 2, and D&C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&C Blue No. 1, and D&C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY."
},
{
"NDCCode": "42549-618-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-618-28)",
"NDC11Code": "42549-0618-28",
"ProductNDC": "42549-618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride And Acetaminophen",
"NonProprietaryName": "Oxycodone Hydrochloride And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040778",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, USP are indicated for the relief of moderate to moderately severe pain.",
"Description": "Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 5 mg*Acetaminophen ............................................ 325 mg. * 5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 10 mg* Acetaminophen ............................................ 325 mg. * 10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. Oxycodone and Acetaminophen Tablets, USP also contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone, 14-hydroxydihydrocodeinone, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula. C18H21NO4HCl MW 351.82. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.17."
},
{
"NDCCode": "42549-640-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-640-28)",
"NDC11Code": "42549-0640-28",
"ProductNDC": "42549-640",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride And Acetaminophen",
"NonProprietaryName": "Oxycodone Hydrochloride And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040778",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "10; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, USP are indicated for the relief of moderate to moderately severe pain.",
"Description": "Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 5 mg*Acetaminophen ............................................ 325 mg. * 5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 10 mg* Acetaminophen ............................................ 325 mg. * 10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. Oxycodone and Acetaminophen Tablets, USP also contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone, 14-hydroxydihydrocodeinone, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula. C18H21NO4HCl MW 351.82. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.17."
},
{
"NDCCode": "42549-659-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (42549-659-28)",
"NDC11Code": "42549-0659-28",
"ProductNDC": "42549-659",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022207",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate tablets contain morphine, an opioid analgesic, indicated for the relief of moderate to severe acute and chronic pain where use of an opioid analgesic is appropriate.",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate with a molecular mass of 758. Morphine sulfate occurs as white, feathery, silky crystals; cubical masses of crystal; or white crystalline powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each tablet contains 15 or 30 mg of morphine sulfate, USP and the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, and stearic acid."
},
{
"NDCCode": "42549-672-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (42549-672-28)",
"NDC11Code": "42549-0672-28",
"ProductNDC": "42549-672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076765",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for: 1 Acute and Maintenance Treatment of Major Depressive Disorder (MDD) in adults (1.1) , 2 Acute Treatment of Generalized Anxiety Disorder (GAD) in adults (1.2) .",
"Description": "Escitalopram tablets USP is an orally administered selective serotonin reuptake inhibitor (SSRI). Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. C20H21FN2O C2H2O4 M.W. 414.40. Escitalopram oxalate, USP, occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets USP are film-coated, round tablets containing escitalopram oxalate, USP, in strengths equivalent to 5 mg, 10 mg, and 20 mg escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "24979-132-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (24979-132-01) ",
"NDC11Code": "24979-0132-01",
"ProductNDC": "24979-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terbutaline Sulfate",
"NonProprietaryName": "Terbutaline Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200713",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211832",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "TERBUTALINE SULFATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200713",
"SamplePackage": "N",
"IndicationAndUsage": "Terbutaline sulfate is indicated for the prevention and reversal of bronchospasm in patients 12 years of age and older with asthma and reversible bronchospasm associated with bronchitis and emphysema.",
"Description": "Terbutaline sulfate USP is a beta-adrenergic agonist bronchodilator available as tablets of 2.5 mg (2.05 mg of the free base) and 5 mg (4.1 mg of the free base) for oral administration. Terbutaline sulfate is ±-α-[(tert –butylamino) methyl]-3,5-dihydroxybenzyl alcohol sulfate (2:1) (salt). The molecular formula is (C12H19NO3)2 H2SO4 and the structural formula is. Terbutaline sulfate USP is a white to gray-white crystalline powder. It is odorless or has a faint odor of acetic acid. It is soluble in water and in 0.1N hydrochloric acid, slightly soluble in methanol, and insoluble in chloroform. Its molecular weight is 548.65. Inactive Ingredients: lactose monohydrate, pregelatinized starch, microcrystalline cellulose, povidone, and magnesium stearate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42549-548-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (42549-548-28)</PackageDescription>
<NDC11Code>42549-0548-28</NDC11Code>
<ProductNDC>42549-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem Tartrate</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078616</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>63459-548-28</NDCCode>
<PackageDescription>28 BLISTER PACK in 1 CARTON (63459-548-28) / 1 TABLET in 1 BLISTER PACK (63459-548-04) </PackageDescription>
<NDC11Code>63459-0548-28</NDC11Code>
<ProductNDC>63459-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentora</ProprietaryName>
<NonProprietaryName>Fentanyl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>BUCCAL; SUBLINGUAL</RouteName>
<StartMarketingDate>20061002</StartMarketingDate>
<EndMarketingDate>20250831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021947</ApplicationNumber>
<LabelerName>Cephalon, LLC</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20061002</StartMarketingDatePackage>
<EndMarketingDatePackage>20250831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FENTORA is indicated for the management of breakthrough pain in cancer patients 18 years of age and older who are already receiving and who are tolerant to around-the-clock opioid therapy for their underlying persistent cancer pain. Patients considered opioid tolerant are those who are taking, for one week or longer, around-the-clock medicine consisting of at least 60 mg of oral morphine per day, at least 25 mcg of transdermal fentanyl per hour, at least 30 mg of oral oxycodone per day, at least 8 mg of oral hydromorphone per day, at least 25 mg oral oxymorphone per day, at least 60 mg of oral hydrocodone per day, or an equianalgesic dose of another opioid. Patients must remain on around-the-clock opioids while taking FENTORA. Limitations of Use: 1 Not for use in opioid non-tolerant patients., 2 Not for use in the management of acute or postoperative pain, including headache/migraine and dental pain [see Contraindications (4)]., 3 As a part of the TIRF REMS, FENTORA may be dispensed by outpatient pharmacies only to outpatients enrolled in the program [see Warnings and Precautions (5.7)]. For inpatient administration of FENTORA, patient and prescriber enrollment are not required.</IndicationAndUsage>
<Description>FENTORA (fentanyl buccal tablet) is an opioid agonist, intended for buccal mucosal administration. FENTORA is designed to be placed and retained within the buccal cavity for a period sufficient to allow disintegration of the tablet and absorption of fentanyl across the oral mucosa. FENTORA employs the OraVescent® drug delivery technology, which generates a reaction that releases carbon dioxide when the tablet comes in contact with saliva. It is believed that transient pH changes accompanying the reaction may optimize dissolution (at a lower pH) and membrane permeation (at a higher pH) of fentanyl through the buccal mucosa. Active Ingredient: Fentanyl citrate, USP is N-(1-Phenethyl-4-piperidyl) propionanilide citrate (1:1). Fentanyl is a highly lipophilic compound (octanol-water partition coefficient at pH 7.4 is 816:1) that is freely soluble in organic solvents and sparingly soluble in water (1:40). The molecular weight of the free base is 336.5 (the citrate salt is 528.6). The pKa of the tertiary nitrogens are 7.3 and 8.4. The compound has the following structural formula. All tablet strengths are expressed as the amount of fentanyl free base, e.g., the 100 microgram strength tablet contains 100 micrograms of fentanyl free base. Inactive Ingredients: Mannitol, sodium starch glycolate, sodium bicarbonate, sodium carbonate, citric acid, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>42549-548-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (42549-548-30)</PackageDescription>
<NDC11Code>42549-0548-30</NDC11Code>
<ProductNDC>42549-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem Tartrate</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078616</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>42549-548-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (42549-548-60)</PackageDescription>
<NDC11Code>42549-0548-60</NDC11Code>
<ProductNDC>42549-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem Tartrate</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078616</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>42549-548-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42549-548-90)</PackageDescription>
<NDC11Code>42549-0548-90</NDC11Code>
<ProductNDC>42549-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem Tartrate</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078616</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Zolpidem tartrate tablets are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem tartrate tablets have been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Zolpidem tartrate is a non-benzodiazepine hypnotic of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and titanium dioxide; the 5-mg tablet also contains FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, polyethylene glycol, polyvinyl alcohol, and talc; the 10-mg tablet also contains stearic acid and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>42549-503-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE, PLASTIC (42549-503-28)</PackageDescription>
<NDC11Code>42549-0503-28</NDC11Code>
<ProductNDC>42549-503</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040124</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carisoprodol Tablets are indicated for the relief of discomfort associated with acute, painful musculoskietal conditions in adults. Carisprodol Tablets should only be used for short periods (up to two or three weeks) brcause adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculosketal conditions are generally of short duration [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Carisoprodol Tablets are available as 350 mg round, white tablets for oral administration. Carisoprodol is a white, crystalline powder, having a mide, characteristic odor and a bitter taste. It is slightly soluble in water; freely soluble in alcohol in chloroform, and in acetone; its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisioprodol is N-isopropyl-2-methyl-2-propyl-1,3- propanediol dicarbamate and the molecular formula is C12H24N2O4, with a molecular weight of 260.33. The structural formula is. Other Ingredients: colloidal silicon dioxide, latose monohydrate, magnesium stearate, microcrystalline cellulose, methylcellulose, povidone, sodium lauryl sulfate, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42549-512-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (42549-512-28)</PackageDescription>
<NDC11Code>42549-0512-28</NDC11Code>
<ProductNDC>42549-512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078428</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Postherpetic Neuralgia. Gabapentin Capsules is indicated for the management of postherpetic neuralgia in adults. Epilepsy. Gabapentin Capsules is indicated as adjunctive therapy in the treatment of partial seizures with and without secondary generalization in patients over 12 years of age with epilepsy. Gabapentin Capsules is also indicated as adjunctive therapy in the treatment of partial seizures in pediatric patients age 3 – 12 years.</IndicationAndUsage>
<Description>Gabapentin Capsules are supplied as imprinted hard shell capsules containing 100 mg, 300 mg, and 400 mg of gabapentin. The inactive ingredients for the capsules are magnesium stearate, pregelatinized starch, starch and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and iron oxide yellow. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, FD&C Yellow No.6 and FD&C Blue No.1. Gabapentin is described as 1-(aminomethyl)cyclohexaneacetic acid with a molecular formula of C9H17NO2 and a molecular weight of 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25.</Description>
</NDC>
<NDC>
<NDCCode>42549-513-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (42549-513-28)</PackageDescription>
<NDC11Code>42549-0513-28</NDC11Code>
<ProductNDC>42549-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078428</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Postherpetic Neuralgia. Gabapentin Capsules is indicated for the management of postherpetic neuralgia in adults. Epilepsy. Gabapentin Capsules is indicated as adjunctive therapy in the treatment of partial seizures with and without secondary generalization in patients over 12 years of age with epilepsy. Gabapentin Capsules is also indicated as adjunctive therapy in the treatment of partial seizures in pediatric patients age 3 – 12 years.</IndicationAndUsage>
<Description>Gabapentin Capsules are supplied as imprinted hard shell capsules containing 100 mg, 300 mg, and 400 mg of gabapentin. The inactive ingredients for the capsules are magnesium stearate, pregelatinized starch, starch and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and iron oxide yellow. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, FD&C Yellow No.6 and FD&C Blue No.1. Gabapentin is described as 1-(aminomethyl)cyclohexaneacetic acid with a molecular formula of C9H17NO2 and a molecular weight of 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25.</Description>
</NDC>
<NDC>
<NDCCode>42549-514-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-514-28)</PackageDescription>
<NDC11Code>42549-0514-28</NDC11Code>
<ProductNDC>42549-514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040400</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42549-516-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-516-28)</PackageDescription>
<NDC11Code>42549-0516-28</NDC11Code>
<ProductNDC>42549-516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040201</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42549-532-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (42549-532-28)</PackageDescription>
<NDC11Code>42549-0532-28</NDC11Code>
<ProductNDC>42549-532</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065061</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Lincosamide Antibacterial [EPC],Lincosamides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the WARNING box, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules, USP and other antibacterial drugs, clindamycin hydrochloride capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below. C18H33ClN2O5SHCl M.W. 461.45. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>42549-537-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-537-28)</PackageDescription>
<NDC11Code>42549-0537-28</NDC11Code>
<ProductNDC>42549-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076017</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Gabapentin tablets USP are indicated for the management of postherpetic neuralgia in adults.</IndicationAndUsage>
<Description>Gabapentin tablets USP are an anticonvulsant for oral administration. Gabapentin USP is described as 1-(aminomethyl)cyclohexaneacetic acid. Gabapentin USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.25. The structural formula of gabapentin USP is. C9H17NO2 M.W. 171.24. Each gabapentin tablet USP, for oral administration, contains 600 mg or 800 mg of gabapentin USP and contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>42549-549-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-549-28)</PackageDescription>
<NDC11Code>42549-0549-28</NDC11Code>
<ProductNDC>42549-549</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076280</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tizanidine is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8CIN5SHCl, its molecular weight is 290.2 and its structural formula is. Tizanidine is supplied as 2 and 4 mg tablets for oral administration. Tizanidine Hydrochloride Tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base) and the inactive ingredients, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42549-556-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-556-28)</PackageDescription>
<NDC11Code>42549-0556-28</NDC11Code>
<ProductNDC>42549-556</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040409</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42549-557-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-557-28)</PackageDescription>
<NDC11Code>42549-0557-28</NDC11Code>
<ProductNDC>42549-557</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040405</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42549-565-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (42549-565-28)</PackageDescription>
<NDC11Code>42549-0565-28</NDC11Code>
<ProductNDC>42549-565</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062702</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin is indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note—Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules, cephalexin for oral suspension, cephalexin tablets, and other antibacterial drugs, cephalexin capsules, cephalexin for oral suspension, and cephalexin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin has the following structural formula. C16H17N3O4SH2O M.W. 365.41. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: CAPSULES: magnesium stearate, silicon dioxide, and sodium starch glycolate. Capsule Shell and Print Constituents: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze modified in SD-45, silicon dioxide or carboxymethylcellulose sodium, sodium lauryl sulfate, titanium dioxide and may contain propylene glycol. In addition, the 250 mg capsule shell contains yellow iron oxide. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: SUSPENSION: FD&C Red #40, cherry mixed fruit flavor (artificial flavors, benzyl alcohol, maltodextrin, and modified corn starch), silicon dioxide, sodium benzoate, sugar (fruit granulated), and xanthan gum. Each tablet contains cephalexin monohydrate equivalent to 250 mg (720 μmol) or 500 mg (1,439 μmol) of cephalexin. Inactive Ingredients: TABLETS: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42549-572-28</NDCCode>
<PackageDescription>28 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-572-28)</PackageDescription>
<NDC11Code>42549-0572-28</NDC11Code>
<ProductNDC>42549-572</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076412</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Blue No. 2, and D&C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&C Blue No. 1, and D&C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY.</Description>
</NDC>
<NDC>
<NDCCode>42549-574-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-574-28)</PackageDescription>
<NDC11Code>42549-0574-28</NDC11Code>
<ProductNDC>42549-574</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078273</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydromorphone hydrochloride tablets USP are indicated for the management of pain in patients where an opioid analgesic is appropriate.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride Tablets USP, 2 mg, 4 mg, and 8 mg are supplied in tablet form for oral administration. Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid analgesic. The chemical name of hydromorphone hydrochloride tablets USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula of hydromorphone hydrochloride is:. Each Hydromorphone Hydrochloride Tablet USP, 2 mg contains: : 1 Hydromorphone Hydrochloride USP . . . . . . . . . . . . 2 mg .</Description>
</NDC>
<NDC>
<NDCCode>42549-577-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-577-28)</PackageDescription>
<NDC11Code>42549-0577-28</NDC11Code>
<ProductNDC>42549-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the treatment of moderate to severe pain not responsive to non-narcotic analgesics. For detoxification treatment of opioid addiction (heroin or other morphine-like drugs). For maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.</IndicationAndUsage>
<Description>Methadone Hydrochloride Tablets USP for oral administration, each contain 5 mg or 10 mg of methadone hydrochloride. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptanone hydrochloride. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. It has the following structural formula. The tablets also contain lactose monohydrate, magnesium stearate, microcrystalline cellulose and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42549-578-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-578-28)</PackageDescription>
<NDC11Code>42549-0578-28</NDC11Code>
<ProductNDC>42549-578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040517</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the treatment of moderate to severe pain not responsive to non-narcotic analgesics. For detoxification treatment of opioid addiction (heroin or other morphine-like drugs). For maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.</IndicationAndUsage>
<Description>Methadone Hydrochloride Tablets USP for oral administration, each contain 5 mg or 10 mg of methadone hydrochloride. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptanone hydrochloride. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. It has the following structural formula. The tablets also contain lactose monohydrate, magnesium stearate, microcrystalline cellulose and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42549-594-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-594-28)</PackageDescription>
<NDC11Code>42549-0594-28</NDC11Code>
<ProductNDC>42549-594</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078273</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydromorphone hydrochloride tablets USP are indicated for the management of pain in patients where an opioid analgesic is appropriate.</IndicationAndUsage>
<Description>Hydromorphone Hydrochloride Tablets USP, 2 mg, 4 mg, and 8 mg are supplied in tablet form for oral administration. Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid analgesic. The chemical name of hydromorphone hydrochloride tablets USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula of hydromorphone hydrochloride is:. Each Hydromorphone Hydrochloride Tablet USP, 2 mg contains: : 1 Hydromorphone Hydrochloride USP . . . . . . . . . . . . 2 mg .</Description>
</NDC>
<NDC>
<NDCCode>42549-597-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-597-28)</PackageDescription>
<NDC11Code>42549-0597-28</NDC11Code>
<ProductNDC>42549-597</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076280</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tizanidine is a short-acting drug for the management of spasticity. Because of the short duration of effect, treatment with tizanidine should be reserved for those daily activities and times when relief of spasticity is most important (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a centrally acting α2-adrenergic agonist. Tizanidine HCl (tizanidine) is a white to off-white, fine crystalline powder, odorless or with a faint characteristic odor. Tizanidine is slightly soluble in water and methanol; solubility in water decreases as the pH increases. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole hydrochloride. Tizanidine’s molecular formula is C9H8CIN5SHCl, its molecular weight is 290.2 and its structural formula is. Tizanidine is supplied as 2 and 4 mg tablets for oral administration. Tizanidine Hydrochloride Tablets are composed of the active ingredient, tizanidine hydrochloride (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base) and the inactive ingredients, colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42549-602-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-602-28)</PackageDescription>
<NDC11Code>42549-0602-28</NDC11Code>
<ProductNDC>42549-602</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022207</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate tablets contain morphine, an opioid analgesic, indicated for the relief of moderate to severe acute and chronic pain where use of an opioid analgesic is appropriate.</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate with a molecular mass of 758. Morphine sulfate occurs as white, feathery, silky crystals; cubical masses of crystal; or white crystalline powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each tablet contains 15 or 30 mg of morphine sulfate, USP and the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42549-609-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-609-28)</PackageDescription>
<NDC11Code>42549-0609-28</NDC11Code>
<ProductNDC>42549-609</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089160</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets are supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is: 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. The 10 mg/650 mg tablet also contains FD & C Blue No. 1 Aluminum Lake 12%. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42549-614-28</NDCCode>
<PackageDescription>28 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-614-28)</PackageDescription>
<NDC11Code>42549-0614-28</NDC11Code>
<ProductNDC>42549-614</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076412</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).</IndicationAndUsage>
<Description>Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Blue No. 2, and D&C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&C Blue No. 1, and D&C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY.</Description>
</NDC>
<NDC>
<NDCCode>42549-618-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-618-28)</PackageDescription>
<NDC11Code>42549-0618-28</NDC11Code>
<ProductNDC>42549-618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040778</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, USP are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 5 mg*Acetaminophen ............................................ 325 mg. * 5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 10 mg* Acetaminophen ............................................ 325 mg. * 10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. Oxycodone and Acetaminophen Tablets, USP also contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone, 14-hydroxydihydrocodeinone, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula. C18H21NO4HCl MW 351.82. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.17.</Description>
</NDC>
<NDC>
<NDCCode>42549-640-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-640-28)</PackageDescription>
<NDC11Code>42549-0640-28</NDC11Code>
<ProductNDC>42549-640</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040778</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, USP are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 5 mg*Acetaminophen ............................................ 325 mg. * 5 mg oxycodone HCl is equivalent to 4.4815 mg of oxycodone. Each tablet for oral administration contains. Oxycodone Hydrochloride, USP .................... 10 mg* Acetaminophen ............................................ 325 mg. * 10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone. Oxycodone and Acetaminophen Tablets, USP also contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone, 14-hydroxydihydrocodeinone, is a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C18H21NO4HCl and the molecular weight 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula. C18H21NO4HCl MW 351.82. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.17.</Description>
</NDC>
<NDC>
<NDCCode>42549-659-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (42549-659-28)</PackageDescription>
<NDC11Code>42549-0659-28</NDC11Code>
<ProductNDC>42549-659</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022207</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate tablets contain morphine, an opioid analgesic, indicated for the relief of moderate to severe acute and chronic pain where use of an opioid analgesic is appropriate.</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate with a molecular mass of 758. Morphine sulfate occurs as white, feathery, silky crystals; cubical masses of crystal; or white crystalline powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pKa is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). Each tablet contains 15 or 30 mg of morphine sulfate, USP and the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42549-672-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (42549-672-28)</PackageDescription>
<NDC11Code>42549-0672-28</NDC11Code>
<ProductNDC>42549-672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076765</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for: 1 Acute and Maintenance Treatment of Major Depressive Disorder (MDD) in adults (1.1) , 2 Acute Treatment of Generalized Anxiety Disorder (GAD) in adults (1.2) .</IndicationAndUsage>
<Description>Escitalopram tablets USP is an orally administered selective serotonin reuptake inhibitor (SSRI). Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. C20H21FN2O C2H2O4 M.W. 414.40. Escitalopram oxalate, USP, occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets USP are film-coated, round tablets containing escitalopram oxalate, USP, in strengths equivalent to 5 mg, 10 mg, and 20 mg escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>24979-132-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (24979-132-01) </PackageDescription>
<NDC11Code>24979-0132-01</NDC11Code>
<ProductNDC>24979-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terbutaline Sulfate</ProprietaryName>
<NonProprietaryName>Terbutaline Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200713</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211832</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>TERBUTALINE SULFATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terbutaline sulfate is indicated for the prevention and reversal of bronchospasm in patients 12 years of age and older with asthma and reversible bronchospasm associated with bronchitis and emphysema.</IndicationAndUsage>
<Description>Terbutaline sulfate USP is a beta-adrenergic agonist bronchodilator available as tablets of 2.5 mg (2.05 mg of the free base) and 5 mg (4.1 mg of the free base) for oral administration. Terbutaline sulfate is ±-α-[(tert –butylamino) methyl]-3,5-dihydroxybenzyl alcohol sulfate (2:1) (salt). The molecular formula is (C12H19NO3)2 H2SO4 and the structural formula is. Terbutaline sulfate USP is a white to gray-white crystalline powder. It is odorless or has a faint odor of acetic acid. It is soluble in water and in 0.1N hydrochloric acid, slightly soluble in methanol, and insoluble in chloroform. Its molecular weight is 548.65. Inactive Ingredients: lactose monohydrate, pregelatinized starch, microcrystalline cellulose, povidone, and magnesium stearate.</Description>
</NDC>
</NDCList>