RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>42571-374-91</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (42571-374-91)  / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0374-91</NDC11Code>
    <ProductNDC>42571-374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lincomycin</ProprietaryName>
    <NonProprietaryName>Lincomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215082</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lincomycin injection is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of lincomycin and other antibacterial drugs, lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Lincomycin injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensisgroup of Streptomyces lincolnensis(Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L­2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6S.HCl.H 2O and the molecular weight is 461.01. The structural formula is represented below:. Lincomycin hydrochloride is a white or practically white, crystalline powder. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and insoluble in acetone. Lincomycin Injection, USP contains lincomycin hydrochloride in a sterile, clear, colorless to slightly yellow solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin injection, USP is a sterile solution for intramuscular and intravenous use. Lincomycin injection, USP is supplied in 2 mL and 10 mL multiple-dose vials containing 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-374-75</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (42571-374-75)  / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0374-75</NDC11Code>
    <ProductNDC>42571-374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lincomycin</ProprietaryName>
    <NonProprietaryName>Lincomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215082</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lincomycin injection is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of lincomycin and other antibacterial drugs, lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Lincomycin injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensisgroup of Streptomyces lincolnensis(Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L­2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6S.HCl.H 2O and the molecular weight is 461.01. The structural formula is represented below:. Lincomycin hydrochloride is a white or practically white, crystalline powder. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and insoluble in acetone. Lincomycin Injection, USP contains lincomycin hydrochloride in a sterile, clear, colorless to slightly yellow solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin injection, USP is a sterile solution for intramuscular and intravenous use. Lincomycin injection, USP is supplied in 2 mL and 10 mL multiple-dose vials containing 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-374-88</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (42571-374-88)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0374-88</NDC11Code>
    <ProductNDC>42571-374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lincomycin</ProprietaryName>
    <NonProprietaryName>Lincomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215082</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lincomycin injection is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of lincomycin and other antibacterial drugs, lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Lincomycin injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensisgroup of Streptomyces lincolnensis(Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L­2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6S.HCl.H 2O and the molecular weight is 461.01. The structural formula is represented below:. Lincomycin hydrochloride is a white or practically white, crystalline powder. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and insoluble in acetone. Lincomycin Injection, USP contains lincomycin hydrochloride in a sterile, clear, colorless to slightly yellow solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin injection, USP is a sterile solution for intramuscular and intravenous use. Lincomycin injection, USP is supplied in 2 mL and 10 mL multiple-dose vials containing 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-374-89</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (42571-374-89)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0374-89</NDC11Code>
    <ProductNDC>42571-374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lincomycin</ProprietaryName>
    <NonProprietaryName>Lincomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215082</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>LINCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lincomycin injection is indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of CDAD, as described in the BOXED WARNING, before selecting lincomycin the physician should consider the nature of the infection and the suitability of other alternatives. Indicated surgical procedures should be performed in conjunction with antibacterial therapy. Lincomycin injection may be administered concomitantly with other antimicrobial agents when indicated. Lincomycin is not indicated in the treatment of minor bacterial infections or viral infections. To reduce the development of drug-resistant bacteria and maintain the effectiveness of lincomycin and other antibacterial drugs, lincomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Lincomycin injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensisgroup of Streptomyces lincolnensis(Fam. Streptomycetaceae). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L­2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18H 34N 2O 6S.HCl.H 2O and the molecular weight is 461.01. The structural formula is represented below:. Lincomycin hydrochloride is a white or practically white, crystalline powder. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and insoluble in acetone. Lincomycin Injection, USP contains lincomycin hydrochloride in a sterile, clear, colorless to slightly yellow solution with benzyl alcohol used as a preservative 9.45 mg/mL, and water for injection. Lincomycin injection, USP is a sterile solution for intramuscular and intravenous use. Lincomycin injection, USP is supplied in 2 mL and 10 mL multiple-dose vials containing 300 mg/mL of lincomycin (equivalent to 340 mg/mL of lincomycin hydrochloride, USP).</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-315-91</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (42571-315-91)  / 10 TABLET in 1 BLISTER PACK (42571-315-20) </PackageDescription>
    <NDC11Code>42571-0315-91</NDC11Code>
    <ProductNDC>42571-315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobazam</ProprietaryName>
    <NonProprietaryName>Clobazam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190402</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211711</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>CLOBAZAM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.</IndicationAndUsage>
    <Description>Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure.   Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-316-91</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (42571-316-91)  / 10 TABLET in 1 BLISTER PACK (42571-316-20) </PackageDescription>
    <NDC11Code>42571-0316-91</NDC11Code>
    <ProductNDC>42571-316</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobazam</ProprietaryName>
    <NonProprietaryName>Clobazam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190402</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211711</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>CLOBAZAM</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.</IndicationAndUsage>
    <Description>Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure.   Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-415-91</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (42571-415-91)  / 2 mL in 1 VIAL (42571-415-75) </PackageDescription>
    <NDC11Code>42571-0415-91</NDC11Code>
    <ProductNDC>42571-415</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam</ProprietaryName>
    <NonProprietaryName>Midazolam</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20240101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217504</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam injection is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
    <Description>Midazolam hydrochloride injection, USP is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam, USP compounded with 0.8% sodium chloride. The pH is adjusted to approximately between 2.7 and 3.3 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam, USP is a white or light yellow powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C 18H 13ClFN 3∙HCl, a calculated molecular weight of 362.25 and the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-147-26</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (42571-147-26)  / 10 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>42571-0147-26</NDC11Code>
    <ProductNDC>42571-147</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate Ophthalmic Solution</ProprietaryName>
    <NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20200615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204777</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>22.3; 6.8</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4 S-trans)-4-(ethylamino)-5,6-dihydro-6- methyl-4 H-thieno[2,3- b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is:. [α]        25°C    (C=1, water) = ~ -17°.             405nm. Its molecular formula is C 10H 16N 2O 4S 3HCl and its structural formula is:. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. [α]        25° C   in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°).             405 nm. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4and its structural formula is:. Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, isotonic, buffered, clear, colorless to nearly colorless and slightly viscous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (6.83 mg timolol maleate USP). Inactive ingredients are Mannitol, Hydroxyethyl cellulose, Sodium hydroxide, Tri Sodium citrate Dihydrate, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-347-30</NDCCode>
    <PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (42571-347-30) </PackageDescription>
    <NDC11Code>42571-0347-30</NDC11Code>
    <ProductNDC>42571-347</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibric Acid</ProprietaryName>
    <NonProprietaryName>Fenofibric Acid</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213450</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FENOFIBRIC ACID</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibricacid  delayed-release capsules are indicated as adjunctive therapy to diet: 1 toreduce  triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL)., 2 toreduce   elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy isnot  possible.</IndicationAndUsage>
    <Description>Fenofibric acid delayed-release capsules (fenofibric acid) are a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as delayed release capsules for oral administration. Each delayed release capsule contains choline fenofibrate, equivalent to 45 mg or 135 mg of fenofibric acid. The chemical name for choline fenofibrate is ethanaminium, 2-hydroxy-N,N,N-trimethyl, 2-{4-(4-chlorobenzoyl)phenoxy] -2-methylpropanoate (1:1) with the following structural formula. The molecular formula is C 22H 28ClNO 5and the molecular weight is 421.91. Choline fenofibrate is freely soluble in methanol, sparingly soluble in ethanol and water, slightly soluble in DMSO and practically insoluble in dichloromethane. The melting point is approximately 210°C. Choline fenofibrate is a white to off white crystalline powder, which is stable under ordinary conditions. Each delayed release capsule contains enteric coated mini-tablets comprised of choline fenofibrate and the following inactive ingredients: hypromellose, hydroxypropyl cellulose, methacrylic acid - ethyl acrylate copolymer (1:1) type A , microcrystalline cellulose, povidone K30, silicon dioxide, sodium stearyl fumarate, talc, triethyl citrate. The capsule shell of the 45 mg capsule contains the following inactive ingredients: ferrosoferric oxide, ferric oxide red, gelatin and titanium dioxide. The capsule shell of the 135 mg capsule contains the following inactive ingredients: FD&amp;C blue no.1, FD&amp;C red no.3, FD&amp;C red no. 40, gelatin and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-347-90</NDCCode>
    <PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (42571-347-90) </PackageDescription>
    <NDC11Code>42571-0347-90</NDC11Code>
    <ProductNDC>42571-347</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibric Acid</ProprietaryName>
    <NonProprietaryName>Fenofibric Acid</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213450</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FENOFIBRIC ACID</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibricacid  delayed-release capsules are indicated as adjunctive therapy to diet: 1 toreduce  triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL)., 2 toreduce   elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy isnot  possible.</IndicationAndUsage>
    <Description>Fenofibric acid delayed-release capsules (fenofibric acid) are a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as delayed release capsules for oral administration. Each delayed release capsule contains choline fenofibrate, equivalent to 45 mg or 135 mg of fenofibric acid. The chemical name for choline fenofibrate is ethanaminium, 2-hydroxy-N,N,N-trimethyl, 2-{4-(4-chlorobenzoyl)phenoxy] -2-methylpropanoate (1:1) with the following structural formula. The molecular formula is C 22H 28ClNO 5and the molecular weight is 421.91. Choline fenofibrate is freely soluble in methanol, sparingly soluble in ethanol and water, slightly soluble in DMSO and practically insoluble in dichloromethane. The melting point is approximately 210°C. Choline fenofibrate is a white to off white crystalline powder, which is stable under ordinary conditions. Each delayed release capsule contains enteric coated mini-tablets comprised of choline fenofibrate and the following inactive ingredients: hypromellose, hydroxypropyl cellulose, methacrylic acid - ethyl acrylate copolymer (1:1) type A , microcrystalline cellulose, povidone K30, silicon dioxide, sodium stearyl fumarate, talc, triethyl citrate. The capsule shell of the 45 mg capsule contains the following inactive ingredients: ferrosoferric oxide, ferric oxide red, gelatin and titanium dioxide. The capsule shell of the 135 mg capsule contains the following inactive ingredients: FD&amp;C blue no.1, FD&amp;C red no.3, FD&amp;C red no. 40, gelatin and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-348-05</NDCCode>
    <PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (42571-348-05) </PackageDescription>
    <NDC11Code>42571-0348-05</NDC11Code>
    <ProductNDC>42571-348</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibric Acid</ProprietaryName>
    <NonProprietaryName>Fenofibric Acid</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213450</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FENOFIBRIC ACID</SubstanceName>
    <StrengthNumber>135</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibricacid  delayed-release capsules are indicated as adjunctive therapy to diet: 1 toreduce  triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL)., 2 toreduce   elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy isnot  possible.</IndicationAndUsage>
    <Description>Fenofibric acid delayed-release capsules (fenofibric acid) are a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as delayed release capsules for oral administration. Each delayed release capsule contains choline fenofibrate, equivalent to 45 mg or 135 mg of fenofibric acid. The chemical name for choline fenofibrate is ethanaminium, 2-hydroxy-N,N,N-trimethyl, 2-{4-(4-chlorobenzoyl)phenoxy] -2-methylpropanoate (1:1) with the following structural formula. The molecular formula is C 22H 28ClNO 5and the molecular weight is 421.91. Choline fenofibrate is freely soluble in methanol, sparingly soluble in ethanol and water, slightly soluble in DMSO and practically insoluble in dichloromethane. The melting point is approximately 210°C. Choline fenofibrate is a white to off white crystalline powder, which is stable under ordinary conditions. Each delayed release capsule contains enteric coated mini-tablets comprised of choline fenofibrate and the following inactive ingredients: hypromellose, hydroxypropyl cellulose, methacrylic acid - ethyl acrylate copolymer (1:1) type A , microcrystalline cellulose, povidone K30, silicon dioxide, sodium stearyl fumarate, talc, triethyl citrate. The capsule shell of the 45 mg capsule contains the following inactive ingredients: ferrosoferric oxide, ferric oxide red, gelatin and titanium dioxide. The capsule shell of the 135 mg capsule contains the following inactive ingredients: FD&amp;C blue no.1, FD&amp;C red no.3, FD&amp;C red no. 40, gelatin and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-348-30</NDCCode>
    <PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (42571-348-30) </PackageDescription>
    <NDC11Code>42571-0348-30</NDC11Code>
    <ProductNDC>42571-348</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibric Acid</ProprietaryName>
    <NonProprietaryName>Fenofibric Acid</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213450</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FENOFIBRIC ACID</SubstanceName>
    <StrengthNumber>135</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibricacid  delayed-release capsules are indicated as adjunctive therapy to diet: 1 toreduce  triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL)., 2 toreduce   elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy isnot  possible.</IndicationAndUsage>
    <Description>Fenofibric acid delayed-release capsules (fenofibric acid) are a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as delayed release capsules for oral administration. Each delayed release capsule contains choline fenofibrate, equivalent to 45 mg or 135 mg of fenofibric acid. The chemical name for choline fenofibrate is ethanaminium, 2-hydroxy-N,N,N-trimethyl, 2-{4-(4-chlorobenzoyl)phenoxy] -2-methylpropanoate (1:1) with the following structural formula. The molecular formula is C 22H 28ClNO 5and the molecular weight is 421.91. Choline fenofibrate is freely soluble in methanol, sparingly soluble in ethanol and water, slightly soluble in DMSO and practically insoluble in dichloromethane. The melting point is approximately 210°C. Choline fenofibrate is a white to off white crystalline powder, which is stable under ordinary conditions. Each delayed release capsule contains enteric coated mini-tablets comprised of choline fenofibrate and the following inactive ingredients: hypromellose, hydroxypropyl cellulose, methacrylic acid - ethyl acrylate copolymer (1:1) type A , microcrystalline cellulose, povidone K30, silicon dioxide, sodium stearyl fumarate, talc, triethyl citrate. The capsule shell of the 45 mg capsule contains the following inactive ingredients: ferrosoferric oxide, ferric oxide red, gelatin and titanium dioxide. The capsule shell of the 135 mg capsule contains the following inactive ingredients: FD&amp;C blue no.1, FD&amp;C red no.3, FD&amp;C red no. 40, gelatin and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-348-90</NDCCode>
    <PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (42571-348-90) </PackageDescription>
    <NDC11Code>42571-0348-90</NDC11Code>
    <ProductNDC>42571-348</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibric Acid</ProprietaryName>
    <NonProprietaryName>Fenofibric Acid</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213450</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FENOFIBRIC ACID</SubstanceName>
    <StrengthNumber>135</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibricacid  delayed-release capsules are indicated as adjunctive therapy to diet: 1 toreduce  triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL)., 2 toreduce   elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy isnot  possible.</IndicationAndUsage>
    <Description>Fenofibric acid delayed-release capsules (fenofibric acid) are a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as delayed release capsules for oral administration. Each delayed release capsule contains choline fenofibrate, equivalent to 45 mg or 135 mg of fenofibric acid. The chemical name for choline fenofibrate is ethanaminium, 2-hydroxy-N,N,N-trimethyl, 2-{4-(4-chlorobenzoyl)phenoxy] -2-methylpropanoate (1:1) with the following structural formula. The molecular formula is C 22H 28ClNO 5and the molecular weight is 421.91. Choline fenofibrate is freely soluble in methanol, sparingly soluble in ethanol and water, slightly soluble in DMSO and practically insoluble in dichloromethane. The melting point is approximately 210°C. Choline fenofibrate is a white to off white crystalline powder, which is stable under ordinary conditions. Each delayed release capsule contains enteric coated mini-tablets comprised of choline fenofibrate and the following inactive ingredients: hypromellose, hydroxypropyl cellulose, methacrylic acid - ethyl acrylate copolymer (1:1) type A , microcrystalline cellulose, povidone K30, silicon dioxide, sodium stearyl fumarate, talc, triethyl citrate. The capsule shell of the 45 mg capsule contains the following inactive ingredients: ferrosoferric oxide, ferric oxide red, gelatin and titanium dioxide. The capsule shell of the 135 mg capsule contains the following inactive ingredients: FD&amp;C blue no.1, FD&amp;C red no.3, FD&amp;C red no. 40, gelatin and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-382-27</NDCCode>
    <PackageDescription>12 POUCH in 1 CARTON (42571-382-27)  / 15 VIAL, SINGLE-USE in 1 POUCH / .2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>42571-0382-27</NDC11Code>
    <ProductNDC>42571-382</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate Preservative Free</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20220215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215936</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>20; 5</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220323</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution preservative free is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14.1)].</IndicationAndUsage>
    <Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride, USP is described chemically as: (4 S-trans)-4-(ethylamino)-5,6-dihydro-6­-methyl-4 H-thieno[2,3- b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is:. [α]        25°C    (C=1, water) = ~ -17°.              405 nm. Its empirical formula is C 10H 16N 2O 4S 3HCl and its structural formula is:. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5­-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. [α]        25°C    in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°).            405 nm. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4and its structural formula is:.  Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242  to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) contains 20 mg dorzolamide (22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (6.83 mg timolol maleate). Inactive ingredients are mannitol, hydroxyethyl cellulose, sodium hydroxide, trisodium citrate dihydrate and water for injection. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) does not contain a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-382-73</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (42571-382-73)  / 15 VIAL, SINGLE-USE in 1 POUCH (42571-382-71)  / .2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>42571-0382-73</NDC11Code>
    <ProductNDC>42571-382</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate Preservative Free</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20220215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215936</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>20; 5</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220323</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution preservative free is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14.1)].</IndicationAndUsage>
    <Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride, USP is described chemically as: (4 S-trans)-4-(ethylamino)-5,6-dihydro-6­-methyl-4 H-thieno[2,3- b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is:. [α]        25°C    (C=1, water) = ~ -17°.              405 nm. Its empirical formula is C 10H 16N 2O 4S 3HCl and its structural formula is:. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5­-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. [α]        25°C    in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°).            405 nm. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4and its structural formula is:.  Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242  to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) contains 20 mg dorzolamide (22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (6.83 mg timolol maleate). Inactive ingredients are mannitol, hydroxyethyl cellulose, sodium hydroxide, trisodium citrate dihydrate and water for injection. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) does not contain a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-463-62</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (42571-463-62)  / 1 VIAL in 1 POUCH / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0463-62</NDC11Code>
    <ProductNDC>42571-463</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Formoterol Fumarate</ProprietaryName>
    <NonProprietaryName>Formoterol Fumarate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20241001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218304</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FORMOTEROL FUMARATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Formoterol fumarate inhalation solution is a long-acting beta 2-adrenergic agonist (beta 2-agonist) indicated for: : 1 Long-term, twice daily (morning and evening) administration in the maintenance treatment of bronchoconstriction in patients with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. ( 1.1) .</IndicationAndUsage>
    <Description>Formoterol fumarate inhalation solution is supplied as 2 mL of formoterol fumarate inhalation solution packaged in a 3 mL single-use low-density polyethylene vial and overwrapped in a foil pouch . Each vial contains 2 mL of a clear, colorless solution composed of formoterol fumarate dihydrate, USP equivalent to 20 mcg of formoterol fumarate in an isotonic, sterile aqueous solution containing sodium chloride, pH adjusted between 4.5 and 5.5 with citric acid monohydrate and trisodium citrate dihydrate. The active component of formoterol fumarate inhalation solution is formoterol fumarate dihydrate, USP, a racemate. Formoterol fumarate dihydrate is a beta 2-adrenergic bronchodilator. Its chemical name is(±)-2’-Hydroxy-5’-[(R*)-1-hydroxy-2-[[(R*)-p-methoxy- α -methylphenethyl]amino]ethyl]formanilide fumarate (2:1) (salt), dihydrate; its structural formula is:. Formoterol fumarate dihydrate, USP has a molecular weight of 840.91 and its empirical formula is (C 19H 24N 2O 4) 2C 4H 4O 42H 2O. Formoterol fumarate dihydrate, USP is a white or almost white or slightly  yellow powder, which is freely soluble in  dimethyl sulphoxide and in acetic acid, soluble in methanol, slightly soluble in 2-propanol, very slightly soluble in water, practically insoluble in acetonitrile and in diethyl ether. Formoterol fumarate inhalation solution does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors and the nebulization system used and its performance. Using the PARI-LC Plus ®nebulizer (with a facemask or mouthpiece) connected to a PRONEB ®Ultra compressor under in vitroconditions, the mean delivered dose from the mouthpiece was approximately 7.3 mcg (37% of label claim). The mean nebulizer flow rate was 4 LPM and the nebulization time was 9 minutes. Formoterol fumarate inhalation solution should be administered from a standard jet nebulizer at adequate flow rates via a facemask or mouthpiece.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-463-73</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (42571-463-73)  / 1 VIAL in 1 POUCH / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>42571-0463-73</NDC11Code>
    <ProductNDC>42571-463</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Formoterol Fumarate</ProprietaryName>
    <NonProprietaryName>Formoterol Fumarate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20241001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218304</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>FORMOTEROL FUMARATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Formoterol fumarate inhalation solution is a long-acting beta 2-adrenergic agonist (beta 2-agonist) indicated for: : 1 Long-term, twice daily (morning and evening) administration in the maintenance treatment of bronchoconstriction in patients with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. ( 1.1) .</IndicationAndUsage>
    <Description>Formoterol fumarate inhalation solution is supplied as 2 mL of formoterol fumarate inhalation solution packaged in a 3 mL single-use low-density polyethylene vial and overwrapped in a foil pouch . Each vial contains 2 mL of a clear, colorless solution composed of formoterol fumarate dihydrate, USP equivalent to 20 mcg of formoterol fumarate in an isotonic, sterile aqueous solution containing sodium chloride, pH adjusted between 4.5 and 5.5 with citric acid monohydrate and trisodium citrate dihydrate. The active component of formoterol fumarate inhalation solution is formoterol fumarate dihydrate, USP, a racemate. Formoterol fumarate dihydrate is a beta 2-adrenergic bronchodilator. Its chemical name is(±)-2’-Hydroxy-5’-[(R*)-1-hydroxy-2-[[(R*)-p-methoxy- α -methylphenethyl]amino]ethyl]formanilide fumarate (2:1) (salt), dihydrate; its structural formula is:. Formoterol fumarate dihydrate, USP has a molecular weight of 840.91 and its empirical formula is (C 19H 24N 2O 4) 2C 4H 4O 42H 2O. Formoterol fumarate dihydrate, USP is a white or almost white or slightly  yellow powder, which is freely soluble in  dimethyl sulphoxide and in acetic acid, soluble in methanol, slightly soluble in 2-propanol, very slightly soluble in water, practically insoluble in acetonitrile and in diethyl ether. Formoterol fumarate inhalation solution does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors and the nebulization system used and its performance. Using the PARI-LC Plus ®nebulizer (with a facemask or mouthpiece) connected to a PRONEB ®Ultra compressor under in vitroconditions, the mean delivered dose from the mouthpiece was approximately 7.3 mcg (37% of label claim). The mean nebulizer flow rate was 4 LPM and the nebulization time was 9 minutes. Formoterol fumarate inhalation solution should be administered from a standard jet nebulizer at adequate flow rates via a facemask or mouthpiece.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-508-29</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (42571-508-29)  / 9 g in 1 POUCH (42571-508-04) </PackageDescription>
    <NDC11Code>42571-0508-29</NDC11Code>
    <ProductNDC>42571-508</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219318</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for oral suspension is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for oral suspension may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation:-. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP 4recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). **Other risk factors for coronary heart disease (CHD) include: age (males: ≥ 45 years; females: ≥ 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is ≥ 60 mg/dL (≥ 1.6 mmol/L). Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression 2,3and increase the rate of regression 3of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
    <Description>Cholestyramine for oral suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin, USP is quite hydrophilic, but insoluble in water. The cholestyramine resin in cholestyramine for oral suspension, USP is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin, USP is contained in 9 grams of cholestyramine for oral suspension, USP. It is represented by the following structural formula. Representation of structure of main polymeric groups. Cholestyramine for oral suspension, USP contains the following inactive ingredients: anhydrous citric acid, D&amp;C yellow No. 10, FD&amp;C yellow No. 6, natural and artificial orange flavor, fructose, propylene glycol alginate, sorbitol, sucrose and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>45865-374-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (45865-374-60)</PackageDescription>
    <NDC11Code>45865-0374-60</NDC11Code>
    <ProductNDC>45865-374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nizatidine</ProprietaryName>
    <NonProprietaryName>Nizatidine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110715</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090618</ApplicationNumber>
    <LabelerName>Medsource Pharmaceuticals</LabelerName>
    <SubstanceName>NIZATIDINE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Nizatidine capsules USP are indicated for up to 8 weeks for the treatment of active duodenal ulcer. In most patients, the ulcer will heal within 4 weeks. Nizatidine capsules USP are indicated for maintenance therapy for duodenal ulcer patients at a reduced dosage of 150 mg h.s. after healing of an active duodenal ulcer. The consequences of continuous therapy with nizatidine for longer than 1 year are not known. Nizatidine capsules USP are indicated for up to 12 weeks for the treatment of endoscopically diagnosed esophagitis, including erosive and ulcerative esophagitis, and associated heartburn due to GERD. Nizatidine capsules USP are indicated for up to 8 weeks for the treatment of active benign gastric ulcer. Before initiating therapy, care should be taken to exclude the possibility of malignant gastric ulceration.</IndicationAndUsage>
    <Description>Nizatidine, USP is a histamine H 2-receptor antagonist. Chemically, it is N-[2-[[[2- [(dimethylamino)methyl]-4-thiazolyl]methyl]thio]ethyl]-N ’ -methyl-2-nitro-1,1-ethenediamine. The structural formula is as follows. Nizatidine USP has the empirical formula C 12H 21N 5O 2S 2 representing a molecular weight of 331.46. It is an off-white to buff crystalline solid that is sparingly soluble in water. Nizatidine USP has a bitter taste and mild sulfur-like odor. Each nizatidine capsule USP contains for oral administration corn starch, magnesium stearate, povidone, pregelatinized starch, sodium starch glycolate and 150 mg (0.45 mmol) or 300 mg (0.91 mmol) of nizatidine USP. The 150 mg capsule shell contains ferric oxide yellow, titanium dioxide, sodium lauryl sulphate and gelatin .The 300 mg capsule shell contains FD&amp;C Blue 1, FD&amp;C Red 40, D&amp;C Yellow 10, FD&amp;C Yellow 6, titanium dioxide, sodium lauryl sulphate and gelatin.The imprinting ink for capsule shell contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, pottasium hydroxide and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-766-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (46708-766-91) </PackageDescription>
    <NDC11Code>46708-0766-91</NDC11Code>
    <ProductNDC>46708-766</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22 mg, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-767-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (46708-767-91) </PackageDescription>
    <NDC11Code>46708-0767-91</NDC11Code>
    <ProductNDC>46708-767</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22 mg, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-768-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (46708-768-91) </PackageDescription>
    <NDC11Code>46708-0768-91</NDC11Code>
    <ProductNDC>46708-768</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22 mg, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-766-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (62332-766-91) </PackageDescription>
    <NDC11Code>62332-0766-91</NDC11Code>
    <ProductNDC>62332-766</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-767-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (62332-767-91) </PackageDescription>
    <NDC11Code>62332-0767-91</NDC11Code>
    <ProductNDC>62332-767</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-768-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (62332-768-91) </PackageDescription>
    <NDC11Code>62332-0768-91</NDC11Code>
    <ProductNDC>62332-768</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217280</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine extended-release tablets are indicated in adults for the treatment of:   Major depressive disorder (MDD)   Panic disorder (PD)   Social anxiety disorder (SAD)   Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
    <Description>Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4’-fluorophenyl)-3S-[(3’,4’­ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is. Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120oC to 138oC and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 12.5 mg, 25 mg or 37.5 mg paroxetine equivalent to 14.22, 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 12.5 mg tablets contain D&amp;C Yellow No. 10 Lake, FD&amp;C Yellow No. 6 Aluminium Lake and polysorbate 80, 25 mg tablets contain D&amp;C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&amp;C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-005-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (42571-005-05) </PackageDescription>
    <NDC11Code>42571-0005-05</NDC11Code>
    <ProductNDC>42571-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090383</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated:  To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events.  As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):       o In adults with primary hyperlipidemia.       o In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).  As an adjunct to other LDL-C-lowering therapies to reduce LDL-C in adults with homozygous familial hypercholesterolemia (HoFH).  As an adjunct to diet for the treatment of adults with:       o Primary dysbetalipoproteinemia.       o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Simvastatin is a prodrug of 3-hydoroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitor that is derived synthetically from a fermentation product of Aspergillus terreus. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S *,4S *),-8aβ]]. The molecular formula of simvastatin is C 25H 38O 5and its molecular weight is 418.57. Its structural formula is:. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral use contain 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, citric acid monohydrate, hydroxypropyl cellulose, hypromellose, iron oxide yellow (5 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-005-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (42571-005-10) </PackageDescription>
    <NDC11Code>42571-0005-10</NDC11Code>
    <ProductNDC>42571-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090383</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated:  To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events.  As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):       o In adults with primary hyperlipidemia.       o In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).  As an adjunct to other LDL-C-lowering therapies to reduce LDL-C in adults with homozygous familial hypercholesterolemia (HoFH).  As an adjunct to diet for the treatment of adults with:       o Primary dysbetalipoproteinemia.       o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Simvastatin is a prodrug of 3-hydoroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitor that is derived synthetically from a fermentation product of Aspergillus terreus. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S *,4S *),-8aβ]]. The molecular formula of simvastatin is C 25H 38O 5and its molecular weight is 418.57. Its structural formula is:. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral use contain 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, citric acid monohydrate, hydroxypropyl cellulose, hypromellose, iron oxide yellow (5 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-005-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (42571-005-30) </PackageDescription>
    <NDC11Code>42571-0005-30</NDC11Code>
    <ProductNDC>42571-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090383</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated:  To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events.  As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):       o In adults with primary hyperlipidemia.       o In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).  As an adjunct to other LDL-C-lowering therapies to reduce LDL-C in adults with homozygous familial hypercholesterolemia (HoFH).  As an adjunct to diet for the treatment of adults with:       o Primary dysbetalipoproteinemia.       o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Simvastatin is a prodrug of 3-hydoroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitor that is derived synthetically from a fermentation product of Aspergillus terreus. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S *,4S *),-8aβ]]. The molecular formula of simvastatin is C 25H 38O 5and its molecular weight is 418.57. Its structural formula is:. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral use contain 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, citric acid monohydrate, hydroxypropyl cellulose, hypromellose, iron oxide yellow (5 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-005-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (42571-005-60) </PackageDescription>
    <NDC11Code>42571-0005-60</NDC11Code>
    <ProductNDC>42571-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090383</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated:  To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events.  As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):       o In adults with primary hyperlipidemia.       o In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).  As an adjunct to other LDL-C-lowering therapies to reduce LDL-C in adults with homozygous familial hypercholesterolemia (HoFH).  As an adjunct to diet for the treatment of adults with:       o Primary dysbetalipoproteinemia.       o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Simvastatin is a prodrug of 3-hydoroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitor that is derived synthetically from a fermentation product of Aspergillus terreus. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S *,4S *),-8aβ]]. The molecular formula of simvastatin is C 25H 38O 5and its molecular weight is 418.57. Its structural formula is:. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral use contain 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, citric acid monohydrate, hydroxypropyl cellulose, hypromellose, iron oxide yellow (5 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>42571-005-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (42571-005-90) </PackageDescription>
    <NDC11Code>42571-0005-90</NDC11Code>
    <ProductNDC>42571-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090383</ApplicationNumber>
    <LabelerName>Micro Labs Limited</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated:  To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events.  As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):       o In adults with primary hyperlipidemia.       o In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).  As an adjunct to other LDL-C-lowering therapies to reduce LDL-C in adults with homozygous familial hypercholesterolemia (HoFH).  As an adjunct to diet for the treatment of adults with:       o Primary dysbetalipoproteinemia.       o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Simvastatin is a prodrug of 3-hydoroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitor that is derived synthetically from a fermentation product of Aspergillus terreus. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S *,4S *),-8aβ]]. The molecular formula of simvastatin is C 25H 38O 5and its molecular weight is 418.57. Its structural formula is:. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral use contain 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, citric acid monohydrate, hydroxypropyl cellulose, hypromellose, iron oxide yellow (5 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized maize starch, talc, and titanium dioxide. Butylated hydroxyanisole is added as a preservative.</Description>
  </NDC>
</NDCList>