{
"NDC": [
{
"NDCCode": "42658-142-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-142-07) ",
"NDC11Code": "42658-0142-07",
"ProductNDC": "42658-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207896",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE; IRBESARTAN",
"StrengthNumber": "12.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "42658-142-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (42658-142-01) ",
"NDC11Code": "42658-0142-01",
"ProductNDC": "42658-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207896",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE; IRBESARTAN",
"StrengthNumber": "12.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "42658-142-04",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42658-142-04) ",
"NDC11Code": "42658-0142-04",
"ProductNDC": "42658-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207896",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE; IRBESARTAN",
"StrengthNumber": "12.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "61919-142-07",
"PackageDescription": "7 TABLET in 1 BOTTLE (61919-142-07) ",
"NDC11Code": "61919-0142-07",
"ProductNDC": "61919-142",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Loratadine",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210913",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076301",
"LabelerName": "DirectRx",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2023-10-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210913",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N"
},
{
"NDCCode": "64220-142-07",
"PackageDescription": "20 kg in 1 DRUM (64220-142-07) ",
"NDC11Code": "64220-0142-07",
"ProductNDC": "64220-142",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100901",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2021-02-03",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "01-SEP-10"
},
{
"NDCCode": "67046-142-07",
"PackageDescription": "7 TABLET, FILM COATED in 1 BLISTER PACK (67046-142-07)",
"NDC11Code": "67046-0142-07",
"ProductNDC": "67046-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-( 5H-dibenzo[ a,d]cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate."
},
{
"NDCCode": "71919-142-07",
"PackageDescription": "15 mL in 1 VIAL, GLASS (71919-142-07) ",
"NDC11Code": "71919-0142-07",
"ProductNDC": "71919-142",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calcarea Acetica",
"NonProprietaryName": "Calcium Acetate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20140521",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "CALCIUM ACETATE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140521",
"SamplePackage": "N"
},
{
"NDCCode": "72060-142-07",
"PackageDescription": "7 CAPSULE in 1 BOTTLE (72060-142-07) ",
"NDC11Code": "72060-0142-07",
"ProductNDC": "72060-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caplyta",
"NonProprietaryName": "Lumateperone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209500",
"LabelerName": "Intra-Cellular Therapies, Inc",
"SubstanceName": "LUMATEPERONE",
"StrengthNumber": "42",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211101",
"SamplePackage": "N",
"IndicationAndUsage": "CAPLYTA is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies (14.1)]., 2 Treatment of depressive episodes associated with bipolar I or II disorder (bipolar depression) in adults, as monotherapy and as adjunctive therapy with lithium or valproate [see Clinical Studies (14.2)]., 3 Adjunctive therapy with antidepressants for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14.3)].",
"Description": "Lumateperone is an atypical antipsychotic present as lumateperone tosylate salt with the chemical name 4-((6bR,10aS)-3-methyl-2,3,6b,9,10,10a-hexahydro-1H,7H-pyrido[3',4':4,5]pyrrolo[1,2,3-de]quinoxalin-8-yl)-1-(4-fluoro-phenyl)-butan-1-one 4-methylbenzenesulfonate. Its molecular formula is C31H36FN3O4S, and its molecular weight is 565.71 g/mol with the following structure. CAPLYTA (lumateperone) capsules are for oral administration. Each capsule contains: 1 42 mg of lumateperone (equivalent to 60 mg of lumateperone tosylate), or, 2 21 mg of lumateperone (equivalent to 30 mg of lumateperone tosylate), or, 3 10.5 mg of lumateperone (equivalent to 15 mg of lumateperone tosylate)."
},
{
"NDCCode": "75936-142-07",
"PackageDescription": "20 mL in 1 CARTON (75936-142-07) ",
"NDC11Code": "75936-0142-07",
"ProductNDC": "75936-142",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Unseen Sunscreen Broad Spectrum Spf 40",
"NonProprietaryName": "Avobenzone, Homosalate, Octinoxate, Octisalate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171010",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "TAYLOR JAMES, LTD.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "3; 8; 4.5; 5",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210104",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "83589-142-07",
"PackageDescription": "50 g in 1 BAG (83589-142-07) ",
"NDC11Code": "83589-0142-07",
"ProductNDC": "83589-142",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260225",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Nanjing Chengong Pharmaceutical Co., Ltd.",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "25-FEB-26"
},
{
"NDCCode": "42658-101-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-101-07) ",
"NDC11Code": "42658-0101-07",
"ProductNDC": "42658-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204076",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230901",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies ( 14.1)], heart [see Clinical Studies ( 14.2)] or liver transplants [see Clinical Studies ( 14.3)], in combination with other immunosuppressants.",
"Description": "Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine; monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP, tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in mycophenolate mofetil, USP 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C Blue #2, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The capsule is printed with edible black ink: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution and potassium hydroxide. Inactive ingredients in mycophenolate mofetil, USP 500 mg tablets include croscarmellose sodium, microcrystalline cellulose 102, povidone (K-90), magnesium stearate, lecithin (soy), black iron oxide, titanium dioxide, red iron oxide, yellow iron oxide, talc, polyethylene glycol, and polyvinyl alcohol."
},
{
"NDCCode": "42658-115-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-115-07) ",
"NDC11Code": "42658-0115-07",
"ProductNDC": "42658-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ticagrelor",
"NonProprietaryName": "Ticagrelor",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208575",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "TICAGRELOR",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Ticagrelor tablets contain ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y 12 ADP-receptor. Chemically it is (1 S,2 S,3 R,5 S)-3-[7-{[(1 R,2 S)-2-(3,4-difluorophenyl)cyclopropyl]amino}-5-(propylthio)-3 H-[1,2,3]-triazolo[4,5- d]pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol. The empirical formula of ticagrelor is C 23H 28F 2N 6O 4S and its molecular weight is 522.57. The chemical structure of ticagrelor is:. Ticagrelor is a crystalline powder with an aqueous solubility of approximately 10 μg/mL at room temperature. Ticagrelor 90 mg tablets for oral administration contain 90 mg of ticagrelor and the following ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, hypromellose E5, polyethylene glycol 4000, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, ferric oxide yellow, ferric oxide red, and ferrosoferric oxide."
},
{
"NDCCode": "42658-122-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-122-07) ",
"NDC11Code": "42658-0122-07",
"ProductNDC": "42658-122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206194",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170415",
"SamplePackage": "N",
"IndicationAndUsage": "1.1Hypertension. Irbesartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular (CV) events, primarily strokes and myocardial infarction. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Irbesartan tablets, USP may be used alone or in combination with other antihypertensive agents. 1.2 Nephropathy in Type 2 Diabetic Patients. Irbesartan tablets, USP are indicated for the treatment of diabetic nephropathy in patients with type 2 diabetes and hypertension, an elevated serum creatinine, and proteinuria (>300 mg/day). In this population, irbesartan tablets, USP reduce the rate of progression of nephropathy as measured by the occurrence of doubling of serum creatinine or end-stage renal disease (need for dialysis or renal transplantation) [see Clinical Studies ( 14.2)] .",
"Description": "Irbesartan Tablets, USP are an angiotensin II receptor (AT 1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration in unscored, film-coated tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: croscarmellose sodium, magnesium stearate, povidone, colloidal silicon dioxide, lactose monohydrate, hypromellose, titanium dioxide and macrogol."
},
{
"NDCCode": "42658-123-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-123-07) ",
"NDC11Code": "42658-0123-07",
"ProductNDC": "42658-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206194",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170415",
"SamplePackage": "N",
"IndicationAndUsage": "1.1Hypertension. Irbesartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular (CV) events, primarily strokes and myocardial infarction. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Irbesartan tablets, USP may be used alone or in combination with other antihypertensive agents. 1.2 Nephropathy in Type 2 Diabetic Patients. Irbesartan tablets, USP are indicated for the treatment of diabetic nephropathy in patients with type 2 diabetes and hypertension, an elevated serum creatinine, and proteinuria (>300 mg/day). In this population, irbesartan tablets, USP reduce the rate of progression of nephropathy as measured by the occurrence of doubling of serum creatinine or end-stage renal disease (need for dialysis or renal transplantation) [see Clinical Studies ( 14.2)] .",
"Description": "Irbesartan Tablets, USP are an angiotensin II receptor (AT 1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration in unscored, film-coated tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: croscarmellose sodium, magnesium stearate, povidone, colloidal silicon dioxide, lactose monohydrate, hypromellose, titanium dioxide and macrogol."
},
{
"NDCCode": "42658-141-07",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (42658-141-07) ",
"NDC11Code": "42658-0141-07",
"ProductNDC": "42658-141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207896",
"LabelerName": "Hisun Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE; IRBESARTAN",
"StrengthNumber": "12.5; 150",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "42658-148-07",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42658-148-07) ",
"NDC11Code": "42658-0148-07",
"ProductNDC": "42658-148",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207175",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablets are for the treatment of partial-onset seizures in patients 12 years of age and older.",
"Description": "Levetiracetam Extended-Release Tablets, USP, are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam Extended-Release Tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: hypromelloses, magnesium stearate, ethylcellulose, triglycerides, oleic acid, ammonium hydroxide, triacetin, talc. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Levetiracetam Extended-Release Tablets, USP meet USP Dissolution Test 2."
},
{
"NDCCode": "42658-149-07",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42658-149-07) ",
"NDC11Code": "42658-0149-07",
"ProductNDC": "42658-149",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207175",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablets are for the treatment of partial-onset seizures in patients 12 years of age and older.",
"Description": "Levetiracetam Extended-Release Tablets, USP, are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam Extended-Release Tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: hypromelloses, magnesium stearate, ethylcellulose, triglycerides, oleic acid, ammonium hydroxide, triacetin, talc. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Levetiracetam Extended-Release Tablets, USP meet USP Dissolution Test 2."
},
{
"NDCCode": "42658-150-07",
"PackageDescription": "1250 mg in 1 BOTTLE (42658-150-07) ",
"NDC11Code": "42658-0150-07",
"ProductNDC": "42658-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/2.5mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-151-07",
"PackageDescription": "2500 mg in 1 BOTTLE (42658-151-07) ",
"NDC11Code": "42658-0151-07",
"ProductNDC": "42658-151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-152-07",
"PackageDescription": "3750 mg in 1 BOTTLE (42658-152-07) ",
"NDC11Code": "42658-0152-07",
"ProductNDC": "42658-152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/7.5mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-153-07",
"PackageDescription": "5000 mg in 1 BOTTLE (42658-153-07) ",
"NDC11Code": "42658-0153-07",
"ProductNDC": "42658-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/10mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-154-07",
"PackageDescription": "7500 mg in 1 BOTTLE (42658-154-07) ",
"NDC11Code": "42658-0154-07",
"ProductNDC": "42658-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/15mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-155-07",
"PackageDescription": "10000 mg in 1 BOTTLE (42658-155-07) ",
"NDC11Code": "42658-0155-07",
"ProductNDC": "42658-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206924",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/20mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-156-07",
"PackageDescription": "2500 mg in 1 BOTTLE (42658-156-07) ",
"NDC11Code": "42658-0156-07",
"ProductNDC": "42658-156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206892",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-157-07",
"PackageDescription": "5000 mg in 1 BOTTLE (42658-157-07) ",
"NDC11Code": "42658-0157-07",
"ProductNDC": "42658-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206892",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/10mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-158-07",
"PackageDescription": "7500 mg in 1 BOTTLE (42658-158-07) ",
"NDC11Code": "42658-0158-07",
"ProductNDC": "42658-158",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206892",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/15mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-159-07",
"PackageDescription": "10000 mg in 1 BOTTLE (42658-159-07) ",
"NDC11Code": "42658-0159-07",
"ProductNDC": "42658-159",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206892",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/20mg",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2."
},
{
"NDCCode": "42658-501-07",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (42658-501-07) ",
"NDC11Code": "42658-0501-07",
"ProductNDC": "42658-501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204077",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Mycophenolate mofetil is indicated for the prophylaxis of organ rejection in patients receiving allogeneic renal, cardiac or hepatic transplants. Mycophenolate mofetil should be used concomitantly with cyclosporine and corticosteroids. Mycophenolate mofetil intravenous is an alternative dosage form to mycophenolate mofetil capsules, tablets and oral suspension. Mycophenolate mofetil intravenous should be administered within 24 hours following transplantation. Mycophenolate mofetil intravenous can be administered for up to 14 days; patients should be switched to oral mycophenolate mofetil as soon as they can tolerate oral medication.",
"Description": "Mycophenolate mofetil, USP is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3 -oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. Mycophenolate mofetil, USP is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for mycophenolate mofetil are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP. Inactive ingredients in mycophenolate mofetil capsules, USP 250 mg include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C Blue #2, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The capsule is printed with edible black ink: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution and potassium hydroxide."
},
{
"NDCCode": "42658-004-01",
"PackageDescription": "1 VIAL in 1 CARTON (42658-004-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "42658-0004-01",
"ProductNDC": "42658-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Capreomycin Sulfate",
"NonProprietaryName": "Capreomycin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204796",
"LabelerName": "Hisun Pharmaceuticals USA, Inc.",
"SubstanceName": "CAPREOMYCIN SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N"
},
{
"NDCCode": "42658-105-04",
"PackageDescription": "90 TABLET in 1 BOTTLE (42658-105-04) ",
"NDC11Code": "42658-0105-04",
"ProductNDC": "42658-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206061",
"LabelerName": "Hisun Pharmaceuiticals USA, Inc",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.",
"Description": "Pravastatin sodium tablets USP are one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1 S-[1α (β S*,δ S*),2α,6α,8β( R*),8aα]]-. Structural formula. C 23H 35NaO 7 MW 446.52. Pravastatin sodium is an odorless, white to yellowish-white powder or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin sodium tablets USP are available for oral administration as 20 mg, 40 mg and 80 mg tablets. Inactive ingredients include: magnesium oxide, anhydrous dibasic calcium phosphate, lactose monohydrate, cellulose powder, yellow ferric oxide, hypromellose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42658-142-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-142-07) </PackageDescription>
<NDC11Code>42658-0142-07</NDC11Code>
<ProductNDC>42658-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207896</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; IRBESARTAN</SubstanceName>
<StrengthNumber>12.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42658-142-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (42658-142-01) </PackageDescription>
<NDC11Code>42658-0142-01</NDC11Code>
<ProductNDC>42658-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207896</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; IRBESARTAN</SubstanceName>
<StrengthNumber>12.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42658-142-04</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42658-142-04) </PackageDescription>
<NDC11Code>42658-0142-04</NDC11Code>
<ProductNDC>42658-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207896</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; IRBESARTAN</SubstanceName>
<StrengthNumber>12.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>61919-142-07</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE (61919-142-07) </PackageDescription>
<NDC11Code>61919-0142-07</NDC11Code>
<ProductNDC>61919-142</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Loratadine</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210913</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076301</ApplicationNumber>
<LabelerName>DirectRx</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-10-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210913</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64220-142-07</NDCCode>
<PackageDescription>20 kg in 1 DRUM (64220-142-07) </PackageDescription>
<NDC11Code>64220-0142-07</NDC11Code>
<ProductNDC>64220-142</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100901</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-02-03</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-SEP-10</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>67046-142-07</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BLISTER PACK (67046-142-07)</PackageDescription>
<NDC11Code>67046-0142-07</NDC11Code>
<ProductNDC>67046-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-( 5H-dibenzo[ a,d]cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are supplied as 5 mg and 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, FD&C Yellow #6, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide; 5 mg tablets also contain FD&C Red #40 and 10 mg tablets contain D&C Yellow #10 and polysorbate.</Description>
</NDC>
<NDC>
<NDCCode>71919-142-07</NDCCode>
<PackageDescription>15 mL in 1 VIAL, GLASS (71919-142-07) </PackageDescription>
<NDC11Code>71919-0142-07</NDC11Code>
<ProductNDC>71919-142</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calcarea Acetica</ProprietaryName>
<NonProprietaryName>Calcium Acetate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140521</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>CALCIUM ACETATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72060-142-07</NDCCode>
<PackageDescription>7 CAPSULE in 1 BOTTLE (72060-142-07) </PackageDescription>
<NDC11Code>72060-0142-07</NDC11Code>
<ProductNDC>72060-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caplyta</ProprietaryName>
<NonProprietaryName>Lumateperone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209500</ApplicationNumber>
<LabelerName>Intra-Cellular Therapies, Inc</LabelerName>
<SubstanceName>LUMATEPERONE</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CAPLYTA is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies (14.1)]., 2 Treatment of depressive episodes associated with bipolar I or II disorder (bipolar depression) in adults, as monotherapy and as adjunctive therapy with lithium or valproate [see Clinical Studies (14.2)]., 3 Adjunctive therapy with antidepressants for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14.3)].</IndicationAndUsage>
<Description>Lumateperone is an atypical antipsychotic present as lumateperone tosylate salt with the chemical name 4-((6bR,10aS)-3-methyl-2,3,6b,9,10,10a-hexahydro-1H,7H-pyrido[3',4':4,5]pyrrolo[1,2,3-de]quinoxalin-8-yl)-1-(4-fluoro-phenyl)-butan-1-one 4-methylbenzenesulfonate. Its molecular formula is C31H36FN3O4S, and its molecular weight is 565.71 g/mol with the following structure. CAPLYTA (lumateperone) capsules are for oral administration. Each capsule contains: 1 42 mg of lumateperone (equivalent to 60 mg of lumateperone tosylate), or, 2 21 mg of lumateperone (equivalent to 30 mg of lumateperone tosylate), or, 3 10.5 mg of lumateperone (equivalent to 15 mg of lumateperone tosylate).</Description>
</NDC>
<NDC>
<NDCCode>75936-142-07</NDCCode>
<PackageDescription>20 mL in 1 CARTON (75936-142-07) </PackageDescription>
<NDC11Code>75936-0142-07</NDC11Code>
<ProductNDC>75936-142</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Unseen Sunscreen Broad Spectrum Spf 40</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171010</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>TAYLOR JAMES, LTD.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>3; 8; 4.5; 5</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83589-142-07</NDCCode>
<PackageDescription>50 g in 1 BAG (83589-142-07) </PackageDescription>
<NDC11Code>83589-0142-07</NDC11Code>
<ProductNDC>83589-142</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260225</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Nanjing Chengong Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>25-FEB-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>42658-101-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-101-07) </PackageDescription>
<NDC11Code>42658-0101-07</NDC11Code>
<ProductNDC>42658-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204076</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies ( 14.1)], heart [see Clinical Studies ( 14.2)] or liver transplants [see Clinical Studies ( 14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine; monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP, tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in mycophenolate mofetil, USP 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C Blue #2, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The capsule is printed with edible black ink: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution and potassium hydroxide. Inactive ingredients in mycophenolate mofetil, USP 500 mg tablets include croscarmellose sodium, microcrystalline cellulose 102, povidone (K-90), magnesium stearate, lecithin (soy), black iron oxide, titanium dioxide, red iron oxide, yellow iron oxide, talc, polyethylene glycol, and polyvinyl alcohol.</Description>
</NDC>
<NDC>
<NDCCode>42658-115-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-115-07) </PackageDescription>
<NDC11Code>42658-0115-07</NDC11Code>
<ProductNDC>42658-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ticagrelor</ProprietaryName>
<NonProprietaryName>Ticagrelor</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208575</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TICAGRELOR</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Ticagrelor tablets contain ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y 12 ADP-receptor. Chemically it is (1 S,2 S,3 R,5 S)-3-[7-{[(1 R,2 S)-2-(3,4-difluorophenyl)cyclopropyl]amino}-5-(propylthio)-3 H-[1,2,3]-triazolo[4,5- d]pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol. The empirical formula of ticagrelor is C 23H 28F 2N 6O 4S and its molecular weight is 522.57. The chemical structure of ticagrelor is:. Ticagrelor is a crystalline powder with an aqueous solubility of approximately 10 μg/mL at room temperature. Ticagrelor 90 mg tablets for oral administration contain 90 mg of ticagrelor and the following ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, hypromellose E5, polyethylene glycol 4000, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, ferric oxide yellow, ferric oxide red, and ferrosoferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>42658-122-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-122-07) </PackageDescription>
<NDC11Code>42658-0122-07</NDC11Code>
<ProductNDC>42658-122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206194</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1Hypertension. Irbesartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular (CV) events, primarily strokes and myocardial infarction. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Irbesartan tablets, USP may be used alone or in combination with other antihypertensive agents. 1.2 Nephropathy in Type 2 Diabetic Patients. Irbesartan tablets, USP are indicated for the treatment of diabetic nephropathy in patients with type 2 diabetes and hypertension, an elevated serum creatinine, and proteinuria (>300 mg/day). In this population, irbesartan tablets, USP reduce the rate of progression of nephropathy as measured by the occurrence of doubling of serum creatinine or end-stage renal disease (need for dialysis or renal transplantation) [see Clinical Studies ( 14.2)] .</IndicationAndUsage>
<Description>Irbesartan Tablets, USP are an angiotensin II receptor (AT 1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration in unscored, film-coated tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: croscarmellose sodium, magnesium stearate, povidone, colloidal silicon dioxide, lactose monohydrate, hypromellose, titanium dioxide and macrogol.</Description>
</NDC>
<NDC>
<NDCCode>42658-123-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-123-07) </PackageDescription>
<NDC11Code>42658-0123-07</NDC11Code>
<ProductNDC>42658-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206194</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1Hypertension. Irbesartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular (CV) events, primarily strokes and myocardial infarction. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Irbesartan tablets, USP may be used alone or in combination with other antihypertensive agents. 1.2 Nephropathy in Type 2 Diabetic Patients. Irbesartan tablets, USP are indicated for the treatment of diabetic nephropathy in patients with type 2 diabetes and hypertension, an elevated serum creatinine, and proteinuria (>300 mg/day). In this population, irbesartan tablets, USP reduce the rate of progression of nephropathy as measured by the occurrence of doubling of serum creatinine or end-stage renal disease (need for dialysis or renal transplantation) [see Clinical Studies ( 14.2)] .</IndicationAndUsage>
<Description>Irbesartan Tablets, USP are an angiotensin II receptor (AT 1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and the structural formula:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan tablets, USP are available for oral administration in unscored, film-coated tablets containing 75 mg, 150 mg, or 300 mg of irbesartan, USP. Inactive ingredients include: croscarmellose sodium, magnesium stearate, povidone, colloidal silicon dioxide, lactose monohydrate, hypromellose, titanium dioxide and macrogol.</Description>
</NDC>
<NDC>
<NDCCode>42658-141-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (42658-141-07) </PackageDescription>
<NDC11Code>42658-0141-07</NDC11Code>
<ProductNDC>42658-141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207896</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; IRBESARTAN</SubstanceName>
<StrengthNumber>12.5; 150</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets USP may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets USP compared to irbesartan or HCTZ monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets USP compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets USP rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and hydrochlorothiazide tablets USP are a combination of an angiotensin II receptor antagonist (AT 1 subtype), irbesartan, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C 25H 28N 6O, and its structural formula is:. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide1,1 dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. All dosage strengths contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, magnesium stearate, colloidal silicon dioxide, ferric oxide red, ferric oxide yellow, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42658-148-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42658-148-07) </PackageDescription>
<NDC11Code>42658-0148-07</NDC11Code>
<ProductNDC>42658-148</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207175</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablets are for the treatment of partial-onset seizures in patients 12 years of age and older.</IndicationAndUsage>
<Description>Levetiracetam Extended-Release Tablets, USP, are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam Extended-Release Tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: hypromelloses, magnesium stearate, ethylcellulose, triglycerides, oleic acid, ammonium hydroxide, triacetin, talc. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Levetiracetam Extended-Release Tablets, USP meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-149-07</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42658-149-07) </PackageDescription>
<NDC11Code>42658-0149-07</NDC11Code>
<ProductNDC>42658-149</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207175</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablets are for the treatment of partial-onset seizures in patients 12 years of age and older.</IndicationAndUsage>
<Description>Levetiracetam Extended-Release Tablets, USP, are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam Extended-Release Tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: hypromelloses, magnesium stearate, ethylcellulose, triglycerides, oleic acid, ammonium hydroxide, triacetin, talc. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Levetiracetam Extended-Release Tablets, USP meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-150-07</NDCCode>
<PackageDescription>1250 mg in 1 BOTTLE (42658-150-07) </PackageDescription>
<NDC11Code>42658-0150-07</NDC11Code>
<ProductNDC>42658-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/2.5mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-151-07</NDCCode>
<PackageDescription>2500 mg in 1 BOTTLE (42658-151-07) </PackageDescription>
<NDC11Code>42658-0151-07</NDC11Code>
<ProductNDC>42658-151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-152-07</NDCCode>
<PackageDescription>3750 mg in 1 BOTTLE (42658-152-07) </PackageDescription>
<NDC11Code>42658-0152-07</NDC11Code>
<ProductNDC>42658-152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/7.5mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-153-07</NDCCode>
<PackageDescription>5000 mg in 1 BOTTLE (42658-153-07) </PackageDescription>
<NDC11Code>42658-0153-07</NDC11Code>
<ProductNDC>42658-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/10mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-154-07</NDCCode>
<PackageDescription>7500 mg in 1 BOTTLE (42658-154-07) </PackageDescription>
<NDC11Code>42658-0154-07</NDC11Code>
<ProductNDC>42658-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/15mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-155-07</NDCCode>
<PackageDescription>10000 mg in 1 BOTTLE (42658-155-07) </PackageDescription>
<NDC11Code>42658-0155-07</NDC11Code>
<ProductNDC>42658-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206924</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/20mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-156-07</NDCCode>
<PackageDescription>2500 mg in 1 BOTTLE (42658-156-07) </PackageDescription>
<NDC11Code>42658-0156-07</NDC11Code>
<ProductNDC>42658-156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206892</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-157-07</NDCCode>
<PackageDescription>5000 mg in 1 BOTTLE (42658-157-07) </PackageDescription>
<NDC11Code>42658-0157-07</NDC11Code>
<ProductNDC>42658-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206892</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/10mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-158-07</NDCCode>
<PackageDescription>7500 mg in 1 BOTTLE (42658-158-07) </PackageDescription>
<NDC11Code>42658-0158-07</NDC11Code>
<ProductNDC>42658-158</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206892</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/15mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-159-07</NDCCode>
<PackageDescription>10000 mg in 1 BOTTLE (42658-159-07) </PackageDescription>
<NDC11Code>42658-0159-07</NDC11Code>
<ProductNDC>42658-159</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206892</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/20mg</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)- 10H-thieno[2,3- b] [1,5]benzodiazepine. The molecular formula is C 17H 20N 4S, which corresponds to a molecular weight of 312.44. The chemical structure is:. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine Tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, crospovidone, microcrystalline cellulose and talc. Olanzapine orally disintegrating tablets meet USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42658-501-07</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (42658-501-07) </PackageDescription>
<NDC11Code>42658-0501-07</NDC11Code>
<ProductNDC>42658-501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204077</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Mycophenolate mofetil is indicated for the prophylaxis of organ rejection in patients receiving allogeneic renal, cardiac or hepatic transplants. Mycophenolate mofetil should be used concomitantly with cyclosporine and corticosteroids. Mycophenolate mofetil intravenous is an alternative dosage form to mycophenolate mofetil capsules, tablets and oral suspension. Mycophenolate mofetil intravenous should be administered within 24 hours following transplantation. Mycophenolate mofetil intravenous can be administered for up to 14 days; patients should be switched to oral mycophenolate mofetil as soon as they can tolerate oral medication.</IndicationAndUsage>
<Description>Mycophenolate mofetil, USP is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3 -oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. Mycophenolate mofetil, USP is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for mycophenolate mofetil are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP. Inactive ingredients in mycophenolate mofetil capsules, USP 250 mg include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C Blue #2, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The capsule is printed with edible black ink: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42658-004-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42658-004-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>42658-0004-01</NDC11Code>
<ProductNDC>42658-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Capreomycin Sulfate</ProprietaryName>
<NonProprietaryName>Capreomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204796</ApplicationNumber>
<LabelerName>Hisun Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CAPREOMYCIN SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42658-105-04</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (42658-105-04) </PackageDescription>
<NDC11Code>42658-0105-04</NDC11Code>
<ProductNDC>42658-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206061</ApplicationNumber>
<LabelerName>Hisun Pharmaceuiticals USA, Inc</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.</IndicationAndUsage>
<Description>Pravastatin sodium tablets USP are one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1 S-[1α (β S*,δ S*),2α,6α,8β( R*),8aα]]-. Structural formula. C 23H 35NaO 7 MW 446.52. Pravastatin sodium is an odorless, white to yellowish-white powder or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (> 300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin sodium tablets USP are available for oral administration as 20 mg, 40 mg and 80 mg tablets. Inactive ingredients include: magnesium oxide, anhydrous dibasic calcium phosphate, lactose monohydrate, cellulose powder, yellow ferric oxide, hypromellose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate.</Description>
</NDC>
</NDCList>