RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>42806-799-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (42806-799-60) </PackageDescription>
    <NDC11Code>42806-0799-60</NDC11Code>
    <ProductNDC>42806-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064150</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either: 3-[[(4-methyl-1-piperazinyl) imino]methyl]rifamycin or 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22-heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13] trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is. Rifampin capsules, USP for oral administration, contain 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, D&amp;C Yellow #10 aluminum lake, docusate sodium, FD&amp;C blue #1, FD&amp;C blue #1 aluminum lake, FD&amp;C blue #2 aluminum lake, FD&amp;C red #40, FD&amp;C red #40 aluminum lake, gelatin, magnesium stearate, microcrystalline cellulose, propylene glycol, shellac glaze, sodium benzoate, black iron oxide, talc, and titanium dioxide. The 150 mg capsules also contain D&amp;C yellow #10, and D&amp;C Red #28.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-799-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (42806-799-01) </PackageDescription>
    <NDC11Code>42806-0799-01</NDC11Code>
    <ProductNDC>42806-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064150</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either: 3-[[(4-methyl-1-piperazinyl) imino]methyl]rifamycin or 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22-heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13] trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is. Rifampin capsules, USP for oral administration, contain 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, D&amp;C Yellow #10 aluminum lake, docusate sodium, FD&amp;C blue #1, FD&amp;C blue #1 aluminum lake, FD&amp;C blue #2 aluminum lake, FD&amp;C red #40, FD&amp;C red #40 aluminum lake, gelatin, magnesium stearate, microcrystalline cellulose, propylene glycol, shellac glaze, sodium benzoate, black iron oxide, talc, and titanium dioxide. The 150 mg capsules also contain D&amp;C yellow #10, and D&amp;C Red #28.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-799-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (42806-799-05) </PackageDescription>
    <NDC11Code>42806-0799-05</NDC11Code>
    <ProductNDC>42806-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064150</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either: 3-[[(4-methyl-1-piperazinyl) imino]methyl]rifamycin or 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22-heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13] trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is. Rifampin capsules, USP for oral administration, contain 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, D&amp;C Yellow #10 aluminum lake, docusate sodium, FD&amp;C blue #1, FD&amp;C blue #1 aluminum lake, FD&amp;C blue #2 aluminum lake, FD&amp;C red #40, FD&amp;C red #40 aluminum lake, gelatin, magnesium stearate, microcrystalline cellulose, propylene glycol, shellac glaze, sodium benzoate, black iron oxide, talc, and titanium dioxide. The 150 mg capsules also contain D&amp;C yellow #10, and D&amp;C Red #28.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-799-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (42806-799-30) </PackageDescription>
    <NDC11Code>42806-0799-30</NDC11Code>
    <ProductNDC>42806-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064150</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either: 3-[[(4-methyl-1-piperazinyl) imino]methyl]rifamycin or 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22-heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13] trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is. Rifampin capsules, USP for oral administration, contain 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, D&amp;C Yellow #10 aluminum lake, docusate sodium, FD&amp;C blue #1, FD&amp;C blue #1 aluminum lake, FD&amp;C blue #2 aluminum lake, FD&amp;C red #40, FD&amp;C red #40 aluminum lake, gelatin, magnesium stearate, microcrystalline cellulose, propylene glycol, shellac glaze, sodium benzoate, black iron oxide, talc, and titanium dioxide. The 150 mg capsules also contain D&amp;C yellow #10, and D&amp;C Red #28.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-799-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (10135-799-60) </PackageDescription>
    <NDC11Code>10135-0799-60</NDC11Code>
    <ProductNDC>10135-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lacosamide</ProprietaryName>
    <NonProprietaryName>Lacosamide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218014</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals, Inc</LabelerName>
    <SubstanceName>LACOSAMIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lacosamide tablets are indicated for:  Treatment of partial-onset seizures in patients 4 years of age and older (1.1).  Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
    <Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3- methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP  is a white to light yellow powder. Freely soluble in methanol, soluble in anhydrous ethanol, sparingly soluble in water, slightly soluble in acetonitrile and practically insoluble in heptane.</Description>
  </NDC>
  <NDC>
    <NDCCode>49999-799-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (49999-799-60) </PackageDescription>
    <NDC11Code>49999-0799-60</NDC11Code>
    <ProductNDC>49999-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077662</ApplicationNumber>
    <LabelerName>Quality Care Products, LLC</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>51407-799-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (51407-799-60) </PackageDescription>
    <NDC11Code>51407-0799-60</NDC11Code>
    <ProductNDC>51407-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209635</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230907</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablets are an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine extended-release tablets are an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f] [1,4] thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42H 50N 6O 4S 2C 4H 4O 4and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate, USP is a white to off-white crystalline powder which is soluble in 0.1N hydrochloric acid, slightly soluble in water, in alcohol, and in methanol. Quetiapine extended-release tablets,USP are supplied for oral administration as 50 mg (peach), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets are lactose monohydrate, microcrystalline cellulose, sodium citrate dihydrate, hypromellose, and magnesium stearate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose, polyethylene glycol 400 and titanium dioxide. In addition, yellow iron oxide (50 mg, 200 mg and 300 mg tablets) and red iron oxide (50 mg tablets) are included in the film coating of specific strengths. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 172.7 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.38 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.5 mg of quetiapine fumarate equivalent to 400 mg quetiapine. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>65841-799-14</NDCCode>
    <PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65841-799-14) </PackageDescription>
    <NDC11Code>65841-0799-14</NDC11Code>
    <ProductNDC>65841-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duloxetine</ProprietaryName>
    <NonProprietaryName>Duloxetine</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140527</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090739</ApplicationNumber>
    <LabelerName>Zydus Lifesciences Limited</LabelerName>
    <SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>68462-799-65</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (68462-799-65)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>68462-0799-65</NDC11Code>
    <ProductNDC>68462-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
    <NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20160623</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208300</ApplicationNumber>
    <LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
    <SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>100000; 1</StrengthNumber>
    <StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nystatin and triamcinolone acetonide ointment is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
    <Description>Nystatin and Triamcinolone Acetonide Ointment USP for dermatologic use contains the antifungal agent nystatin, USP and the synthetic corticosteroid triamcinolone acetonide, USP. Nystatin, USP is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder, having an odor suggestive of cereals. Is hygroscopic, and is affected by long exposure to light, heat, and air. It freely soluble in dimethylformamide and in dimethyl sulfoxide, slightly to sparingly soluble in methanol, in n-propyl alcohol, and in n-butyl alcohol, practically insoluble in water and in alcohol; insoluble in chloroform and in ether. Structural formula. Triamcinolone acetonide, USP is designated chemically as Pregna-1, 4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)-9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16, 17-acetal with acetone. The white to cream colored, crystalline powder, having not more than a slight odor, is practically insoluble in water, sparingly soluble in dehydrated alcohol, in chloroform and in methanol. Structural formula. Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide, USP in an ointment base of mineral oil and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-799-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71205-799-60) </PackageDescription>
    <NDC11Code>71205-0799-60</NDC11Code>
    <ProductNDC>71205-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075022</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-05-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230505</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride tablets USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula. C21H31N5O2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>71610-799-53</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (71610-799-53) </PackageDescription>
    <NDC11Code>71610-0799-53</NDC11Code>
    <ProductNDC>71610-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210824</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208677</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240222</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin capsules are indicated for: 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin is described chemically as ( S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8H 17NO 2and the molecular weight is 159.23. The chemical structure of pregabalin is:. Pregabalin is a white to off-white, crystalline powder with a pK a1of 4.2 and a pK a2of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&amp;C Blue 1, FD&amp;C Red 40 and FD&amp;C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-799-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (76420-799-60) </PackageDescription>
    <NDC11Code>76420-0799-60</NDC11Code>
    <ProductNDC>76420-799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200115</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA010721</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240405</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meclizine hydrochloride is indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
    <Description>Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Tablets Inactive ingredients for the tablets are: corn starch; dibasic calcium phosphate; magnesium stearate; polyethylene glycol; sucrose. The 12.5 mg tablets also contain: FD&amp;C Blue # 1. The 25 mg tablets also contain: FD&amp;C Yellow # 6 and D&amp;C Yellow # 10. The 50 mg tablets also contain: FD&amp;C Blue # 1, FD&amp;C Yellow # 6 and D&amp;C Yellow # 10. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base. Each meclizine hydrochloride 50 mg tablet contains 50 mg of meclizine dihydrochloride equivalent to 42.14 mg of meclizine free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-086-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (42806-086-60) </PackageDescription>
    <NDC11Code>42806-0086-60</NDC11Code>
    <ProductNDC>42806-086</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190417</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208972</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2019-04-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190417</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 421.96. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro [4,5]decane-7,9-dione monohydrochloride. The empirical formula C21H31N5O2HCl is represented by the following structural formula. Each tablet, for oral administration, contains 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets and 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-178-60</NDCCode>
    <PackageDescription>60 g in 1 BOTTLE (42806-178-60) </PackageDescription>
    <NDC11Code>42806-0178-60</NDC11Code>
    <ProductNDC>42806-178</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nystatin Topical Powder</ProprietaryName>
    <NonProprietaryName>Nystatin Topical Powder</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180502</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210532</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>NYSTATIN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>U/g</StrengthUnit>
    <Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2018-05-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180502</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
    <Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.09. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram dispersed in talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-185-60</NDCCode>
    <PackageDescription>60 g in 1 BOTTLE (42806-185-60) </PackageDescription>
    <NDC11Code>42806-0185-60</NDC11Code>
    <ProductNDC>42806-185</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nystatin Topical Powder</ProprietaryName>
    <NonProprietaryName>Nystatin Topical Powder</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230414</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210532</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>NYSTATIN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>U/g</StrengthUnit>
    <Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230414</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
    <Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.09. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram. Inactive ingredients: magnesium stearate and light kaolin.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-186-60</NDCCode>
    <PackageDescription>60 g in 1 BOTTLE (42806-186-60) </PackageDescription>
    <NDC11Code>42806-0186-60</NDC11Code>
    <ProductNDC>42806-186</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Klayesta</ProprietaryName>
    <NonProprietaryName>Nystatin Topical Powder</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230414</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210532</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>NYSTATIN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>U/g</StrengthUnit>
    <Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230414</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KLAYESTA is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. KLAYESTA is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
    <Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.09. Structural formula. KLAYESTA is for dermatologic use. KLAYESTA contains 100,000 USP nystatin units per gram. Inactive ingredients: magnesium stearate and light kaolin.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-260-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (42806-260-60) </PackageDescription>
    <NDC11Code>42806-0260-60</NDC11Code>
    <ProductNDC>42806-260</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemfibrozil</ProprietaryName>
    <NonProprietaryName>Gemfibrozil</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170323</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078012</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>GEMFIBROZIL</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>PPAR alpha [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170323</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemfibrozil tablets, USP are indicated as adjunctive therapy to diet for. 1. Treatment of adult patients with very high elevations of serum triglyceride levels (Types IV and V hyperlipidemia) who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Patients who present such risk typically have serum triglycerides over 2000 mg/dL and have elevations of VLDL-cholesterol as well as fasting chylomicrons (Type V hyperlipidemia). Subjects who consistently have total serum or plasma triglycerides below 1000 mg/dL are unlikely to present a risk of pancreatitis. Gemfibrozil therapy may be considered for those subjects with triglyceride elevations between 1000 and 2000 mg/dL who have a history of pancreatitis or of recurrent abdominal pain typical of pancreatitis. It is recognized that some Type IV patients with triglycerides under 1000 mg/dL may, through dietary or alcoholic indiscretion, convert to a Type V pattern with massive triglyceride elevations accompanying fasting chylomicronemia, but the influence of gemfibrozil therapy on the risk of pancreatitis in such situations has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I, IV, and V hyperlipoproteinemia. 2. Reducing the risk of developing coronary heart disease only in Type IIb patients without history of or symptoms of existing coronary heart disease who have had an inadequate response to weight loss, dietary therapy, exercise, and other pharmacologic agents (such as bile acid sequestrants and nicotinic acid, known to reduce LDL-and raise HDL-cholesterol) and who have the following triad of lipid abnormalities: low HDL-cholesterol levels in addition to elevated LDL-cholesterol and elevated triglycerides (see WARNINGS, PRECAUTIONS, and CLINICAL PHARMACOLOGY). The National Cholesterol Education Program has defined a serum HDL-cholesterol value that is consistently below 35 mg/dL as constituting an independent risk factor for coronary heart disease. Patients with significantly elevated triglycerides should be closely observed when treated with gemfibrozil. In some patients with high triglyceride levels, treatment with gemfibrozil is associated with a significant increase in LDL-cholesterol. BECAUSE OF POTENTIAL TOXICITY SUCH AS MALIGNANCY, GALLBLADDER DISEASE, ABDOMINAL PAIN LEADING TO APPENDECTOMY AND OTHER ABDOMINAL SURGERIES, AN INCREASED INCIDENCE IN NON-CORONARY MORTALITY, AND THE 44% RELATIVE INCREASE DURING THE TRIAL PERIOD IN AGE-ADJUSTED ALL-CAUSE MORTALITY SEEN WITH THE CHEMICALLY AND PHARMACOLOGICALLY RELATED DRUG, CLOFIBRATE, THE POTENTIAL BENEFIT OF GEMFIBROZIL IN TREATING TYPE IIA PATIENTS WITH ELEVATIONS OF LDL-CHOLESTEROL ONLY IS NOT LIKELY TO OUTWEIGH THE RISKS. GEMFIBROZIL IS ALSO NOT INDICATED FOR THE TREATMENT OF PATIENTS WITH LOW HDL-CHOLESTEROL AS THEIR ONLY LIPID ABNORMALITY. In a subgroup analysis of patients in the Helsinki Heart Study with above-median HDL-cholesterol values at baseline (greater than 46.4 mg/dL), the incidence of serious coronary events was similar for gemfibrozil and placebo subgroups (see Table I). The initial treatment for dyslipidemia is dietary therapy specific for the type of lipoprotein abnormality. Excess body weight and excess alcohol intake may be important factors in hypertriglyceridemia and should be managed prior to any drug therapy. Physical exercise can be an important ancillary measure, and has been associated with rises in HDL-cholesterol. Diseases contributory to hyperlipidemia such as hypothyroidism or diabetes mellitus should be looked for and adequately treated. Estrogen therapy is sometimes associated with massive rises in plasma triglycerides, especially in subjects with familial hypertriglyceridemia. In such cases, discontinuation of estrogen therapy may obviate the need for specific drug therapy of hypertriglyceridemia. The use of drugs should be considered only when reasonable attempts have been made to obtain satisfactory results with nondrug methods. If the decision is made to use drugs, the patient should be instructed that this does not reduce the importance of adhering to diet.</IndicationAndUsage>
    <Description>Gemfibrozil is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg gemfibrozil. Each tablet also contains the following inactive ingredients: calcium stearate NF, carnauba wax NF, colloidal silicon dioxide NF, croscarmellose sodium NF, hydroxypropyl cellulose NF, microcrystalline cellulose NF, polyethylene glycol 3350 NF, polyvinyl alcohol USP, pregelatinized starch NF, sodium lauryl sulfate NF, talc USP and titanium dioxide USP. The chemical name is 5-(2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid, with the following structural formula. The empirical formula is C15H22O3 and the molecular weight is 250.35; the solubility in water and acid is 0.0019% and in dilute base it is greater than 1%. The melting point is 58° to 61°C. Gemfibrozil is a white solid which is stable under ordinary conditions.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-266-95</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (42806-266-95)  / 9 g in 1 POUCH (42806-266-98) </PackageDescription>
    <NDC11Code>42806-0266-95</NDC11Code>
    <ProductNDC>42806-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074557</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males 45 years; females: 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is 60 mg/dL (1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake, FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-270-95</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (42806-270-95)  / 5.7 g in 1 POUCH (42806-270-98) </PackageDescription>
    <NDC11Code>42806-0270-95</NDC11Code>
    <ProductNDC>42806-270</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine Light</ProprietaryName>
    <NonProprietaryName>Cholestyramine Light</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074558</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/5.7g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP Light powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP Light powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males 45 years; females: 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is 60 mg/dL (1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP Light powder, the chloride salt of a basic anion exchange resin, a cholesterol-lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each 5.7 grams of Cholestyramine for Oral Suspension, USP Light powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive Ingredients: aspartame, citric acid anhydrous, colloidal silicon dioxide, fructose, mannitol, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake and FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-299-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (42806-299-60) </PackageDescription>
    <NDC11Code>42806-0299-60</NDC11Code>
    <ProductNDC>42806-299</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nizatidine</ProprietaryName>
    <NonProprietaryName>Nizatidine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076178</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>NIZATIDINE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nizatidine capsules are indicated for up to 8 weeks for the treatment of active duodenal ulcer. In most patients, the ulcer will heal within 4 weeks. Nizatidine capsules are indicated for maintenance therapy for duodenal ulcer patients at a reduced dosage of 150 mg h.s. after healing of an active duodenal ulcer. The consequences of continuous therapy with nizatidine for longer than 1 year are not known. Nizatidine capsules are indicated for up to 12 weeks for the treatment of endoscopically diagnosed esophagitis, including erosive and ulcerative esophagitis, and associated heartburn due to GERD. Nizatidine capsules are indicated for up to 8 weeks for the treatment of active benign gastric ulcer. Before initiating therapy, care should be taken to exclude the possibility of malignant gastric ulceration.</IndicationAndUsage>
    <Description>Nizatidine, USP is a histamine H2-receptor antagonist. Chemically, it is N-[2-[[[2-[(dimethylamino)methyl]-4-thiazolyl]methyl]thio]ethyl]-N'-methyl-2-nitro-1,1-ethenediamine. The structural formula is as follows. Nizatidine, USP has the empirical formula C12H21N5O2S2 representing a molecular weight of 331.46. It is an off white to buff crystalline solid that is soluble in water. Nizatidine has a bitter taste and mild sulfur-like odor. Each capsule for oral administration contains nizatidine, USP, 150 mg (0.45 mmol) or 300 mg (0.91 mmol), croscarmellose sodium, corn starch, dimethicone, partially pregelatinized starch (Corn), povidone, talc. Ingredients for 150 mg capsule shell: gelatin, iron oxide yellow, titanium dioxide. Ingredients for 300 mg capsule shell: D&amp;C red 28, FD&amp;C blue 1, FD&amp;C yellow 6, gelatin, titanium dioxide. Ingredients for 150 mg capsule shell: gelatin, iron oxide yellow, titanium dioxide. Ingredients for 300 mg capsule shell: D&amp;C red 28, FD&amp;C blue 1, FD&amp;C yellow 6, gelatin, titanium dioxide. Ingredients for the ink used in capsule printing are ammonia solution concentrated, butyl alcohol, black iron oxide, dehydrated alcohol, isopropyl alcohol, propylene glycol, potassium hydroxide, shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-300-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (42806-300-60) </PackageDescription>
    <NDC11Code>42806-0300-60</NDC11Code>
    <ProductNDC>42806-300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nizatidine</ProprietaryName>
    <NonProprietaryName>Nizatidine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076178</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>NIZATIDINE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nizatidine capsules are indicated for up to 8 weeks for the treatment of active duodenal ulcer. In most patients, the ulcer will heal within 4 weeks. Nizatidine capsules are indicated for maintenance therapy for duodenal ulcer patients at a reduced dosage of 150 mg h.s. after healing of an active duodenal ulcer. The consequences of continuous therapy with nizatidine for longer than 1 year are not known. Nizatidine capsules are indicated for up to 12 weeks for the treatment of endoscopically diagnosed esophagitis, including erosive and ulcerative esophagitis, and associated heartburn due to GERD. Nizatidine capsules are indicated for up to 8 weeks for the treatment of active benign gastric ulcer. Before initiating therapy, care should be taken to exclude the possibility of malignant gastric ulceration.</IndicationAndUsage>
    <Description>Nizatidine, USP is a histamine H2-receptor antagonist. Chemically, it is N-[2-[[[2-[(dimethylamino)methyl]-4-thiazolyl]methyl]thio]ethyl]-N'-methyl-2-nitro-1,1-ethenediamine. The structural formula is as follows. Nizatidine, USP has the empirical formula C12H21N5O2S2 representing a molecular weight of 331.46. It is an off white to buff crystalline solid that is soluble in water. Nizatidine has a bitter taste and mild sulfur-like odor. Each capsule for oral administration contains nizatidine, USP, 150 mg (0.45 mmol) or 300 mg (0.91 mmol), croscarmellose sodium, corn starch, dimethicone, partially pregelatinized starch (Corn), povidone, talc. Ingredients for 150 mg capsule shell: gelatin, iron oxide yellow, titanium dioxide. Ingredients for 300 mg capsule shell: D&amp;C red 28, FD&amp;C blue 1, FD&amp;C yellow 6, gelatin, titanium dioxide. Ingredients for 150 mg capsule shell: gelatin, iron oxide yellow, titanium dioxide. Ingredients for 300 mg capsule shell: D&amp;C red 28, FD&amp;C blue 1, FD&amp;C yellow 6, gelatin, titanium dioxide. Ingredients for the ink used in capsule printing are ammonia solution concentrated, butyl alcohol, black iron oxide, dehydrated alcohol, isopropyl alcohol, propylene glycol, potassium hydroxide, shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-363-13</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (42806-363-13)  / 60 mL in 1 BOTTLE, GLASS</PackageDescription>
    <NDC11Code>42806-0363-13</NDC11Code>
    <ProductNDC>42806-363</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oseltamivir Phosphate For Oral Suspension</ProprietaryName>
    <NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220802</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215538</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220802</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oseltamivir phosphate for oral suspension is an influenza neuraminidase inhibitor (NAI) indicated for: : 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).</IndicationAndUsage>
    <Description>Oseltamivir phosphate USP, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains monosodium citrate, sodium benzoate, saccharin sodium, sorbitol, titanium dioxide, tutti frutti type FLVP, xanthan gum. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)‐4‐acetylamino‐5‐amino‐3(1‐ethylpropoxy)‐1‐cyclohexene‐1‐carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows:.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-405-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42806-405-60) </PackageDescription>
    <NDC11Code>42806-0405-60</NDC11Code>
    <ProductNDC>42806-405</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride Tablets</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209993</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white or almost white crystals powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: Povidone, Sodium Lauryl Sulfate, Magnesium Stearate, Cellulose Acetate, Polyethylene Glycol (PEG 400, PEG 8000), Triacetin, Hypromellose, Titanium Dioxide, Polysorbate 80, Ferrosoferric Oxide, Shellac. Metformin Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-406-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42806-406-60) </PackageDescription>
    <NDC11Code>42806-0406-60</NDC11Code>
    <ProductNDC>42806-406</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride Tablet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209993</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white or almost white crystals powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: Povidone, Sodium Lauryl Sulfate, Magnesium Stearate, Cellulose Acetate, Polyethylene Glycol (PEG 400, PEG 8000), Triacetin, Hypromellose, Titanium Dioxide, Polysorbate 80, Ferrosoferric Oxide, Shellac. Metformin Meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-410-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42806-410-60) </PackageDescription>
    <NDC11Code>42806-0410-60</NDC11Code>
    <ProductNDC>42806-410</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075932</ApplicationNumber>
    <LabelerName>Epic Pharma LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BuPROPion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 100 mg (aquamarine), 150 mg (plum), and 200 mg (light pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: carnauba wax, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, hypromellose, titanium dioxide, polyethylene glycol and polysorbate. In addition, the 100 mg tablet contains FD&amp;C blue No. 1 lake and 150 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C blue No. 2 lake and the 200 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C yellow No. 6 lake. This product meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-411-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42806-411-60) </PackageDescription>
    <NDC11Code>42806-0411-60</NDC11Code>
    <ProductNDC>42806-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075932</ApplicationNumber>
    <LabelerName>Epic Pharma LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BuPROPion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 100 mg (aquamarine), 150 mg (plum), and 200 mg (light pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: carnauba wax, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, hypromellose, titanium dioxide, polyethylene glycol and polysorbate. In addition, the 100 mg tablet contains FD&amp;C blue No. 1 lake and 150 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C blue No. 2 lake and the 200 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C yellow No. 6 lake. This product meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-413-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42806-413-60) </PackageDescription>
    <NDC11Code>42806-0413-60</NDC11Code>
    <ProductNDC>42806-413</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216766</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion Hydrochloride Extended-Release Tablets (SR) are indicated as an aid to smoking cessation treatment.</IndicationAndUsage>
    <Description>Bupropion Hydrochloride Extended-Release Tablets, USP (SR) are a non-nicotine aid to smoking cessation. Bupropion Hydrochloride Extended-Release Tablets, USP (SR) are chemically unrelated to nicotine or other agents currently used in the treatment of nicotine addiction. Initially developed and marketed as an antidepressant (WELLBUTRIN ®[bupropion hydrochloride] tablets and WELLBUTRIN SR ®[bupropion hydrochloride] sustained-release tablets), Bupropion Hydrochloride Extended-Release Tablets, USP (SR) are also chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 150-mg (purple), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, L-cysteine hydrochloride monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part hydrolyzed, povidone, talc and titanium dioxide. In addition, the 150-mg tablet contains FD&amp;C Blue No. 2 aluminum lake and FD&amp;C Red No. 40 aluminum lake. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-415-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42806-415-60) </PackageDescription>
    <NDC11Code>42806-0415-60</NDC11Code>
    <ProductNDC>42806-415</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075932</ApplicationNumber>
    <LabelerName>Epic Pharma LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BuPROPion Hydrochloride Extended-Release Tablets, USP (SR) are supplied for oral administration as 100 mg (aquamarine), 150 mg (plum), and 200 mg (light pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: carnauba wax, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, hypromellose, titanium dioxide, polyethylene glycol and polysorbate. In addition, the 100 mg tablet contains FD&amp;C blue No. 1 lake and 150 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C blue No. 2 lake and the 200 mg tablet contains FD&amp;C red No. 40 lake and FD&amp;C yellow No. 6 lake. This product meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-424-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42806-424-60) </PackageDescription>
    <NDC11Code>42806-0424-60</NDC11Code>
    <ProductNDC>42806-424</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211347</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion Hydrochloride Extended-Release Tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of Bupropion Hydrochloride Extended-Release Tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion Hydrochloride Extended-Release Tablets USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1­propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion Hydrochloride Extended-Release Tablets USP (SR) are supplied for oral administration as 100-mg (light blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, L-cysteine hydrochloride monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part hydrolyzed, povidone, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&amp;C blue No. 1 aluminum lake and FD&amp;C blue No. 2 aluminum lake; the 150-mg tablet contains FD&amp;C blue No. 2 aluminum lake and FD&amp;C red No. 40 aluminum lake, and the 200-mg tablet contains FD&amp;C red No. 40 aluminum lake. Bupropion Hydrochloride Extended-Release Tablets, USP (SR) meet USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-425-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42806-425-60) </PackageDescription>
    <NDC11Code>42806-0425-60</NDC11Code>
    <ProductNDC>42806-425</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211347</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion Hydrochloride Extended-Release Tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of Bupropion Hydrochloride Extended-Release Tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion Hydrochloride Extended-Release Tablets USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1­propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion Hydrochloride Extended-Release Tablets USP (SR) are supplied for oral administration as 100-mg (light blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, L-cysteine hydrochloride monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part hydrolyzed, povidone, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&amp;C blue No. 1 aluminum lake and FD&amp;C blue No. 2 aluminum lake; the 150-mg tablet contains FD&amp;C blue No. 2 aluminum lake and FD&amp;C red No. 40 aluminum lake, and the 200-mg tablet contains FD&amp;C red No. 40 aluminum lake. Bupropion Hydrochloride Extended-Release Tablets, USP (SR) meet USP Dissolution Test 2.</Description>
  </NDC>
</NDCList>