{
"NDC": [
{
"NDCCode": "42858-029-33",
"PackageDescription": "1 TUBE in 1 CARTON (42858-029-33) / 30 g in 1 TUBE",
"NDC11Code": "42858-0029-33",
"ProductNDC": "42858-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine",
"NonProprietaryName": "Lidocaine And Prilocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213253",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230416",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine 2.5% and Prilocaine 2.5% Cream, USP (a eutectic mixture) is indicated as a topical anesthetic for use on: 1 normal intact skin for local analgesia., 2 genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.",
"Description": "Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure. C14H22N2O M.W. 234.3. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol:water partition ratio of 25 at pH 7.4, and has the following structure. C13H20N2O M.W. 220.32. Each gram of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid ester (as emulsifiers), carboxypolymethylene (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains no preservative; however, it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is 1.00."
},
{
"NDCCode": "42858-029-55",
"PackageDescription": "5 TUBE in 1 CARTON (42858-029-55) / 5 g in 1 TUBE",
"NDC11Code": "42858-0029-55",
"ProductNDC": "42858-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine",
"NonProprietaryName": "Lidocaine And Prilocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213253",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230416",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine 2.5% and Prilocaine 2.5% Cream, USP (a eutectic mixture) is indicated as a topical anesthetic for use on: 1 normal intact skin for local analgesia., 2 genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.",
"Description": "Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure. C14H22N2O M.W. 234.3. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol:water partition ratio of 25 at pH 7.4, and has the following structure. C13H20N2O M.W. 220.32. Each gram of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid ester (as emulsifiers), carboxypolymethylene (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains no preservative; however, it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is 1.00."
},
{
"NDCCode": "47682-029-33",
"PackageDescription": "50 PACKET in 1 BOX, UNIT-DOSE (47682-029-33) > 2 TABLET, FILM COATED in 1 PACKET (47682-029-99)",
"NDC11Code": "47682-0029-33",
"ProductNDC": "47682-029",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Green Guard Ibupro Relief",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091237",
"LabelerName": "Unifirst First Aid Corporation",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-12-12"
},
{
"NDCCode": "59115-029-33",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (59115-029-33) ",
"NDC11Code": "59115-0029-33",
"ProductNDC": "59115-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20040609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076558",
"LabelerName": "Hikma Pharmaceutical",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20040609",
"SamplePackage": "N"
},
{
"NDCCode": "42858-075-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-075-45) ",
"NDC11Code": "42858-0075-45",
"ProductNDC": "42858-075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-076-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-076-45) ",
"NDC11Code": "42858-0076-45",
"ProductNDC": "42858-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-077-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-077-45) ",
"NDC11Code": "42858-0077-45",
"ProductNDC": "42858-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-078-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-078-45) ",
"NDC11Code": "42858-0078-45",
"ProductNDC": "42858-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-079-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-079-45) ",
"NDC11Code": "42858-0079-45",
"ProductNDC": "42858-079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-080-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-080-45) ",
"NDC11Code": "42858-0080-45",
"ProductNDC": "42858-080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-081-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-081-45) ",
"NDC11Code": "42858-0081-45",
"ProductNDC": "42858-081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-401-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-401-45) ",
"NDC11Code": "42858-0401-45",
"ProductNDC": "42858-401",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-402-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-402-45) ",
"NDC11Code": "42858-0402-45",
"ProductNDC": "42858-402",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-403-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-403-45) ",
"NDC11Code": "42858-0403-45",
"ProductNDC": "42858-403",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-404-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-404-45) ",
"NDC11Code": "42858-0404-45",
"ProductNDC": "42858-404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-405-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-405-45) ",
"NDC11Code": "42858-0405-45",
"ProductNDC": "42858-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-406-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-406-45) ",
"NDC11Code": "42858-0406-45",
"ProductNDC": "42858-406",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-407-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-407-45) ",
"NDC11Code": "42858-0407-45",
"ProductNDC": "42858-407",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "0270-1316-52",
"PackageDescription": "10 BOTTLE in 1 BOX (0270-1316-52) / 75 mL in 1 BOTTLE",
"NDC11Code": "00270-1316-52",
"ProductNDC": "0270-1316",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "370",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "BRACCO DIAGNOSTICS INC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5- lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 ISOVUE 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 ISOVUE 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "10702-029-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (10702-029-01) ",
"NDC11Code": "10702-0029-01",
"ProductNDC": "10702-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040887",
"LabelerName": "KVK-TECH, Inc.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120815",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose."
},
{
"NDCCode": "10702-029-03",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (10702-029-03) ",
"NDC11Code": "10702-0029-03",
"ProductNDC": "10702-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040887",
"LabelerName": "KVK-TECH, Inc.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120815",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose."
},
{
"NDCCode": "10702-029-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (10702-029-10) ",
"NDC11Code": "10702-0029-10",
"ProductNDC": "10702-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040887",
"LabelerName": "KVK-TECH, Inc.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120815",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose."
},
{
"NDCCode": "62034-029-77",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (62034-029-77) > 1 CAPSULE, DELAYED RELEASE PELLETS in 1 BLISTER PACK (62034-029-11)",
"NDC11Code": "62034-0029-77",
"ProductNDC": "62034-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20160401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Duloxetine Delayed-release Capsules is a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for: 1 Major Depressive Disorder (MDD) ( 1.1) , 2 Generalized Anxiety Disorder (GAD) ( 1.2) , 3 Diabetic Peripheral Neuropathic Pain (DPNP) ( 1.3) , 4 Chronic Musculoskeletal Pain ( 1.5) .",
"Description": "Duloxetine Delayed-release Capsules (duloxetine hydrochloride) are a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C 18H 19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "70436-124-33",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (70436-124-33) ",
"NDC11Code": "70436-0124-33",
"ProductNDC": "70436-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20230720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215382",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "408",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230720",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol injection for intrathecal administration is indicated for: 1 Lumbar and thoracic myelography, and computed tomography (CT) myelography in adults and pediatric patients aged 2 years and older, 2 Cervical and total columnar myelography and CT myelography in adults, 3 CT cisternography in adults.",
"Description": "Iopamidol injection is a radiographic contrast agent for intrathecal use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6- triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8,and the following structural formula:. Iopamidol injection is a sterile, clear, colorless to pale yellow solution available in two concentrations of iodine: 1 Iopamidol injection 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg sodium) and 1 mg tromethamine., 2 Iopamidol injection 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-125-82",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70436-125-82) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-125-37) ",
"NDC11Code": "70436-0125-82",
"ProductNDC": "70436-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "510",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-127-52",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-52) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-127-37) ",
"NDC11Code": "70436-0127-52",
"ProductNDC": "70436-127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-127-62",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-62) / 75 mL in 1 VIAL, SINGLE-DOSE (70436-127-39) ",
"NDC11Code": "70436-0127-62",
"ProductNDC": "70436-127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-127-82",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-82) / 100 mL in 1 VIAL, SINGLE-DOSE (70436-127-40) ",
"NDC11Code": "70436-0127-82",
"ProductNDC": "70436-127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-211-80",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (70436-211-80) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-211-37) ",
"NDC11Code": "70436-0211-80",
"ProductNDC": "70436-211",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "408",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "70436-219-52",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70436-219-52) / 30 mL in 1 VIAL, SINGLE-DOSE (70436-219-36) ",
"NDC11Code": "70436-0219-52",
"ProductNDC": "70436-219",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iopamidol",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217134",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "612",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42858-029-33</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (42858-029-33) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>42858-0029-33</NDC11Code>
<ProductNDC>42858-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
<NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213253</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine 2.5% and Prilocaine 2.5% Cream, USP (a eutectic mixture) is indicated as a topical anesthetic for use on: 1 normal intact skin for local analgesia., 2 genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.</IndicationAndUsage>
<Description>Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure. C14H22N2O M.W. 234.3. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol:water partition ratio of 25 at pH 7.4, and has the following structure. C13H20N2O M.W. 220.32. Each gram of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid ester (as emulsifiers), carboxypolymethylene (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains no preservative; however, it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is 1.00.</Description>
</NDC>
<NDC>
<NDCCode>42858-029-55</NDCCode>
<PackageDescription>5 TUBE in 1 CARTON (42858-029-55) / 5 g in 1 TUBE</PackageDescription>
<NDC11Code>42858-0029-55</NDC11Code>
<ProductNDC>42858-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
<NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213253</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine 2.5% and Prilocaine 2.5% Cream, USP (a eutectic mixture) is indicated as a topical anesthetic for use on: 1 normal intact skin for local analgesia., 2 genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.</IndicationAndUsage>
<Description>Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure. C14H22N2O M.W. 234.3. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol:water partition ratio of 25 at pH 7.4, and has the following structure. C13H20N2O M.W. 220.32. Each gram of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid ester (as emulsifiers), carboxypolymethylene (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine 2.5% and Prilocaine 2.5% Cream, USP contains no preservative; however, it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of Lidocaine 2.5% and Prilocaine 2.5% Cream, USP is 1.00.</Description>
</NDC>
<NDC>
<NDCCode>47682-029-33</NDCCode>
<PackageDescription>50 PACKET in 1 BOX, UNIT-DOSE (47682-029-33) > 2 TABLET, FILM COATED in 1 PACKET (47682-029-99)</PackageDescription>
<NDC11Code>47682-0029-33</NDC11Code>
<ProductNDC>47682-029</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Green Guard Ibupro Relief</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091237</ApplicationNumber>
<LabelerName>Unifirst First Aid Corporation</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-12-12</LastUpdate>
</NDC>
<NDC>
<NDCCode>59115-029-33</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (59115-029-33) </PackageDescription>
<NDC11Code>59115-0029-33</NDC11Code>
<ProductNDC>59115-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076558</ApplicationNumber>
<LabelerName>Hikma Pharmaceutical</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42858-075-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-075-45) </PackageDescription>
<NDC11Code>42858-0075-45</NDC11Code>
<ProductNDC>42858-075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-076-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-076-45) </PackageDescription>
<NDC11Code>42858-0076-45</NDC11Code>
<ProductNDC>42858-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-077-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-077-45) </PackageDescription>
<NDC11Code>42858-0077-45</NDC11Code>
<ProductNDC>42858-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-078-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-078-45) </PackageDescription>
<NDC11Code>42858-0078-45</NDC11Code>
<ProductNDC>42858-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-079-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-079-45) </PackageDescription>
<NDC11Code>42858-0079-45</NDC11Code>
<ProductNDC>42858-079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-080-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-080-45) </PackageDescription>
<NDC11Code>42858-0080-45</NDC11Code>
<ProductNDC>42858-080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-081-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-081-45) </PackageDescription>
<NDC11Code>42858-0081-45</NDC11Code>
<ProductNDC>42858-081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules contain methylphenidate hydrochloride, a central nervous system (CNS) stimulant. Methylphenidate hydrochloride extended-release capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. Methylphenidate hydrochloride extended-release capsules are available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 115 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 4020 mg: D&C Red No. 33, D&C Yellow No. 1030 mg: FD&C Blue No. 1, FD&C Red No. 340 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 4050 mg: D&C Yellow No. 10, FD&C Green No. 360 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-401-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-401-45) </PackageDescription>
<NDC11Code>42858-0401-45</NDC11Code>
<ProductNDC>42858-401</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-402-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-402-45) </PackageDescription>
<NDC11Code>42858-0402-45</NDC11Code>
<ProductNDC>42858-402</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-403-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-403-45) </PackageDescription>
<NDC11Code>42858-0403-45</NDC11Code>
<ProductNDC>42858-403</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-404-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-404-45) </PackageDescription>
<NDC11Code>42858-0404-45</NDC11Code>
<ProductNDC>42858-404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-405-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-405-45) </PackageDescription>
<NDC11Code>42858-0405-45</NDC11Code>
<ProductNDC>42858-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-406-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-406-45) </PackageDescription>
<NDC11Code>42858-0406-45</NDC11Code>
<ProductNDC>42858-406</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-407-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-407-45) </PackageDescription>
<NDC11Code>42858-0407-45</NDC11Code>
<ProductNDC>42858-407</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>0270-1316-52</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (0270-1316-52) / 75 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1316-52</NDC11Code>
<ProductNDC>0270-1316</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>370</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>BRACCO DIAGNOSTICS INC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5- lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 ISOVUE 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 ISOVUE 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>10702-029-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (10702-029-01) </PackageDescription>
<NDC11Code>10702-0029-01</NDC11Code>
<ProductNDC>10702-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040887</ApplicationNumber>
<LabelerName>KVK-TECH, Inc.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>10702-029-03</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (10702-029-03) </PackageDescription>
<NDC11Code>10702-0029-03</NDC11Code>
<ProductNDC>10702-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040887</ApplicationNumber>
<LabelerName>KVK-TECH, Inc.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>10702-029-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (10702-029-10) </PackageDescription>
<NDC11Code>10702-0029-10</NDC11Code>
<ProductNDC>10702-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040887</ApplicationNumber>
<LabelerName>KVK-TECH, Inc.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m 2, or greater than or equal to 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2) ] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>62034-029-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (62034-029-77) > 1 CAPSULE, DELAYED RELEASE PELLETS in 1 BLISTER PACK (62034-029-11)</PackageDescription>
<NDC11Code>62034-0029-77</NDC11Code>
<ProductNDC>62034-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Duloxetine Delayed-release Capsules is a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for: 1 Major Depressive Disorder (MDD) ( 1.1) , 2 Generalized Anxiety Disorder (GAD) ( 1.2) , 3 Diabetic Peripheral Neuropathic Pain (DPNP) ( 1.3) , 4 Chronic Musculoskeletal Pain ( 1.5) .</IndicationAndUsage>
<Description>Duloxetine Delayed-release Capsules (duloxetine hydrochloride) are a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C 18H 19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70436-124-33</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (70436-124-33) </PackageDescription>
<NDC11Code>70436-0124-33</NDC11Code>
<ProductNDC>70436-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20230720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215382</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>408</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol injection for intrathecal administration is indicated for: 1 Lumbar and thoracic myelography, and computed tomography (CT) myelography in adults and pediatric patients aged 2 years and older, 2 Cervical and total columnar myelography and CT myelography in adults, 3 CT cisternography in adults.</IndicationAndUsage>
<Description>Iopamidol injection is a radiographic contrast agent for intrathecal use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6- triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8,and the following structural formula:. Iopamidol injection is a sterile, clear, colorless to pale yellow solution available in two concentrations of iodine: 1 Iopamidol injection 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg sodium) and 1 mg tromethamine., 2 Iopamidol injection 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-125-82</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70436-125-82) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-125-37) </PackageDescription>
<NDC11Code>70436-0125-82</NDC11Code>
<ProductNDC>70436-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>510</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-127-52</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-52) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-127-37) </PackageDescription>
<NDC11Code>70436-0127-52</NDC11Code>
<ProductNDC>70436-127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-127-62</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-62) / 75 mL in 1 VIAL, SINGLE-DOSE (70436-127-39) </PackageDescription>
<NDC11Code>70436-0127-62</NDC11Code>
<ProductNDC>70436-127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-127-82</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70436-127-82) / 100 mL in 1 VIAL, SINGLE-DOSE (70436-127-40) </PackageDescription>
<NDC11Code>70436-0127-82</NDC11Code>
<ProductNDC>70436-127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-211-80</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-211-80) / 50 mL in 1 VIAL, SINGLE-DOSE (70436-211-37) </PackageDescription>
<NDC11Code>70436-0211-80</NDC11Code>
<ProductNDC>70436-211</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>408</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70436-219-52</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70436-219-52) / 30 mL in 1 VIAL, SINGLE-DOSE (70436-219-36) </PackageDescription>
<NDC11Code>70436-0219-52</NDC11Code>
<ProductNDC>70436-219</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iopamidol</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217134</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>612</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iopamidol Injection, USP is a radiographic contrast agent indicated for. Intra-arterial Procedures*( 1.1) : 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>Iopamidol Injection, USP is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C 17H 22I 3N 3O 8, and the following structural formula:. Iopamidol Injection, USP is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 Iopamidol Injection, USP, 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 Iopamidol Injection, USP, 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 Iopamidol Injection, USP, 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 Iopamidol Injection, USP, 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
</NDCList>