{
"NDC": [
{
"NDCCode": "42858-353-40",
"PackageDescription": "4 POUCH in 1 CARTON (42858-353-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "42858-0353-40",
"ProductNDC": "42858-353",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170703",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021306",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "7.5",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.",
"Description": "Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "42858-150-40",
"PackageDescription": "4 POUCH in 1 BOX (42858-150-40) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "42858-0150-40",
"ProductNDC": "42858-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20241101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215329",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241101",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine Transdermal System is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery. .",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo [3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.28 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, isopropyl palmitate, crospovidone, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, isopropyl palmitate, crospovidone, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "42858-493-40",
"PackageDescription": "4 POUCH in 1 CARTON (42858-493-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "42858-0493-40",
"ProductNDC": "42858-493",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170703",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021306",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "10",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.",
"Description": "Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "42858-586-40",
"PackageDescription": "4 POUCH in 1 CARTON (42858-586-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "42858-0586-40",
"ProductNDC": "42858-586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170703",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021306",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "15",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.",
"Description": "Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "42858-750-40",
"PackageDescription": "4 POUCH in 1 CARTON (42858-750-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "42858-0750-40",
"ProductNDC": "42858-750",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170703",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021306",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "5",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.",
"Description": "Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "42858-839-40",
"PackageDescription": "4 POUCH in 1 CARTON (42858-839-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "42858-0839-40",
"ProductNDC": "42858-839",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170703",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021306",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "20",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170705",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.",
"Description": "Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "37808-353-08",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (37808-353-08) > 40 mg in 1 BLISTER PACK",
"NDC11Code": "37808-0353-08",
"ProductNDC": "37808-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Heb Gentle Laxative",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20150213",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "H E B",
"SubstanceName": "BISACODYL",
"StrengthNumber": "10",
"StrengthUnit": "mg/2000mg",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20151116",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of occasional constipation and irregularity. -This product generally produces bowel movement in 15 minutes to 1 hour."
},
{
"NDCCode": "41250-353-04",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (41250-353-04) > 40 mg in 1 BLISTER PACK",
"NDC11Code": "41250-0353-04",
"ProductNDC": "41250-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Meijer Gentle Laxative",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20150213",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Meijer Distribution Inc.",
"SubstanceName": "BISACODYL",
"StrengthNumber": "10",
"StrengthUnit": "mg/2000mg",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20151116",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of occasional constipation and irregularity. -This product generally produces bowel movement in 15 minutes to 1 hour."
},
{
"NDCCode": "51346-353-01",
"PackageDescription": "40 mL in 1 CARTON (51346-353-01)",
"NDC11Code": "51346-0353-01",
"ProductNDC": "51346-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Greentinol Essence",
"NonProprietaryName": "Dimethicone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151001",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "NATURE REPUBLIC CO., LTD.",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "1.63",
"StrengthUnit": "mg/40mL",
"Status": "Deprecated",
"LastUpdate": "2020-02-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "58411-353-40",
"PackageDescription": "1 TUBE in 1 CARTON (58411-353-40) > 5 g in 1 TUBE",
"NDC11Code": "58411-0353-40",
"ProductNDC": "58411-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cle De Peau Beaute Concealer",
"ProprietaryNameSuffix": "Ivory",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/5g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180201",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "59779-353-40",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (59779-353-40) > 40 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC",
"NDC11Code": "59779-0353-40",
"ProductNDC": "59779-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naproxen Sodium",
"NonProprietaryName": "Naproxen Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20141130",
"EndMarketingDate": "20231229",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021920",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "NAPROXEN SODIUM",
"StrengthNumber": "220",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141130",
"EndMarketingDatePackage": "20231229",
"SamplePackage": "N"
},
{
"NDCCode": "79903-353-80",
"PackageDescription": "2 CONTAINER in 1 CARTON (79903-353-80) / 40 LOZENGE in 1 CONTAINER (79903-353-40) ",
"NDC11Code": "79903-0353-80",
"ProductNDC": "79903-353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equate Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20260713",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077007",
"LabelerName": "WALMART INC.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260713",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "42858-067-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (42858-067-01) ",
"NDC11Code": "42858-0067-01",
"ProductNDC": "42858-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170601",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075753",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "67",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170602",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).",
"Description": "Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42858-079-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-079-45) ",
"NDC11Code": "42858-0079-45",
"ProductNDC": "42858-079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Hydrochloride",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200401",
"SamplePackage": "N"
},
{
"NDCCode": "42858-134-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (42858-134-01) ",
"NDC11Code": "42858-0134-01",
"ProductNDC": "42858-134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170601",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075753",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "134",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170601",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).",
"Description": "Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42858-161-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-161-01) ",
"NDC11Code": "42858-0161-01",
"ProductNDC": "42858-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-162-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-162-01) ",
"NDC11Code": "42858-0162-01",
"ProductNDC": "42858-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-163-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-163-01) ",
"NDC11Code": "42858-0163-01",
"ProductNDC": "42858-163",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-164-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-164-01) ",
"NDC11Code": "42858-0164-01",
"ProductNDC": "42858-164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-165-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-165-01) ",
"NDC11Code": "42858-0165-01",
"ProductNDC": "42858-165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-166-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-166-01) ",
"NDC11Code": "42858-0166-01",
"ProductNDC": "42858-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-167-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (42858-167-01) ",
"NDC11Code": "42858-0167-01",
"ProductNDC": "42858-167",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisdexamfetamine Dimesylate",
"NonProprietaryName": "Lisdexamfetamine Dimesylate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215330",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "LISDEXAMFETAMINE DIMESYLATE",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].",
"Description": "Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "42858-200-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (42858-200-01) ",
"NDC11Code": "42858-0200-01",
"ProductNDC": "42858-200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170601",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075753",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170601",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).",
"Description": "Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1."
},
{
"NDCCode": "42858-320-12",
"PackageDescription": "118 mL in 1 BOTTLE, PLASTIC (42858-320-12) ",
"NDC11Code": "42858-0320-12",
"ProductNDC": "42858-320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide",
"NonProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20221012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202955",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "BROMPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "2; 10; 30",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221012",
"SamplePackage": "N",
"IndicationAndUsage": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is indicated for relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.",
"Description": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch aroma. Each 5 mL (1 teaspoonful) contains. In a palatable, aromatic vehicle. Inactive Ingredients: anhydrous citric acid, artificial butterscotch flavor, ethyl alcohol, FD&C Red #40, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate and sucrose. May also contain sodium citrate for pH adjustment. The pH range is between 4.0 and 5.5. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration."
},
{
"NDCCode": "42858-320-16",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (42858-320-16) ",
"NDC11Code": "42858-0320-16",
"ProductNDC": "42858-320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide",
"NonProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20221012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202955",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "BROMPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "2; 10; 30",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221012",
"SamplePackage": "N",
"IndicationAndUsage": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is indicated for relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.",
"Description": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch aroma. Each 5 mL (1 teaspoonful) contains. In a palatable, aromatic vehicle. Inactive Ingredients: anhydrous citric acid, artificial butterscotch flavor, ethyl alcohol, FD&C Red #40, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate and sucrose. May also contain sodium citrate for pH adjustment. The pH range is between 4.0 and 5.5. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration."
},
{
"NDCCode": "42858-401-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-401-45) ",
"NDC11Code": "42858-0401-45",
"ProductNDC": "42858-401",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-402-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-402-45) ",
"NDC11Code": "42858-0402-45",
"ProductNDC": "42858-402",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-403-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-403-45) ",
"NDC11Code": "42858-0403-45",
"ProductNDC": "42858-403",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-404-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-404-45) ",
"NDC11Code": "42858-0404-45",
"ProductNDC": "42858-404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
},
{
"NDCCode": "42858-405-45",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-405-45) ",
"NDC11Code": "42858-0405-45",
"ProductNDC": "42858-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aptensio Xr",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205831",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150417",
"SamplePackage": "N",
"IndicationAndUsage": "APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].",
"Description": "APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>42858-353-40</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (42858-353-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>42858-0353-40</NDC11Code>
<ProductNDC>42858-353</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170703</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>42858-150-40</NDCCode>
<PackageDescription>4 POUCH in 1 BOX (42858-150-40) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>42858-0150-40</NDC11Code>
<ProductNDC>42858-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215329</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine Transdermal System is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery. .</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo [3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.28 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, isopropyl palmitate, crospovidone, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, isopropyl palmitate, crospovidone, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>42858-493-40</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (42858-493-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>42858-0493-40</NDC11Code>
<ProductNDC>42858-493</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170703</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>42858-586-40</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (42858-586-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>42858-0586-40</NDC11Code>
<ProductNDC>42858-586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170703</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>42858-750-40</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (42858-750-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>42858-0750-40</NDC11Code>
<ProductNDC>42858-750</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170703</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>42858-839-40</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (42858-839-40) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>42858-0839-40</NDC11Code>
<ProductNDC>42858-839</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170703</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Buprenorphine transdermal system is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>37808-353-08</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (37808-353-08) > 40 mg in 1 BLISTER PACK</PackageDescription>
<NDC11Code>37808-0353-08</NDC11Code>
<ProductNDC>37808-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Heb Gentle Laxative</ProprietaryName>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20150213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>H E B</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2000mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of occasional constipation and irregularity. -This product generally produces bowel movement in 15 minutes to 1 hour.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-353-04</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (41250-353-04) > 40 mg in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41250-0353-04</NDC11Code>
<ProductNDC>41250-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Meijer Gentle Laxative</ProprietaryName>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20150213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Meijer Distribution Inc.</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2000mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of occasional constipation and irregularity. -This product generally produces bowel movement in 15 minutes to 1 hour.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51346-353-01</NDCCode>
<PackageDescription>40 mL in 1 CARTON (51346-353-01)</PackageDescription>
<NDC11Code>51346-0353-01</NDC11Code>
<ProductNDC>51346-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Greentinol Essence</ProprietaryName>
<NonProprietaryName>Dimethicone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>NATURE REPUBLIC CO., LTD.</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>1.63</StrengthNumber>
<StrengthUnit>mg/40mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-02-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>58411-353-40</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (58411-353-40) > 5 g in 1 TUBE</PackageDescription>
<NDC11Code>58411-0353-40</NDC11Code>
<ProductNDC>58411-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cle De Peau Beaute Concealer</ProprietaryName>
<ProprietaryNameSuffix>Ivory</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/5g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59779-353-40</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (59779-353-40) > 40 CAPSULE, LIQUID FILLED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>59779-0353-40</NDC11Code>
<ProductNDC>59779-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naproxen Sodium</ProprietaryName>
<NonProprietaryName>Naproxen Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141130</StartMarketingDate>
<EndMarketingDate>20231229</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021920</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>NAPROXEN SODIUM</SubstanceName>
<StrengthNumber>220</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141130</StartMarketingDatePackage>
<EndMarketingDatePackage>20231229</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>79903-353-80</NDCCode>
<PackageDescription>2 CONTAINER in 1 CARTON (79903-353-80) / 40 LOZENGE in 1 CONTAINER (79903-353-40) </PackageDescription>
<NDC11Code>79903-0353-80</NDC11Code>
<ProductNDC>79903-353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equate Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260713</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077007</ApplicationNumber>
<LabelerName>WALMART INC.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42858-067-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (42858-067-01) </PackageDescription>
<NDC11Code>42858-0067-01</NDC11Code>
<ProductNDC>42858-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170601</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075753</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>67</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170602</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).</IndicationAndUsage>
<Description>Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42858-079-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (42858-079-45) </PackageDescription>
<NDC11Code>42858-0079-45</NDC11Code>
<ProductNDC>42858-079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42858-134-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (42858-134-01) </PackageDescription>
<NDC11Code>42858-0134-01</NDC11Code>
<ProductNDC>42858-134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170601</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075753</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>134</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170601</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).</IndicationAndUsage>
<Description>Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42858-161-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-161-01) </PackageDescription>
<NDC11Code>42858-0161-01</NDC11Code>
<ProductNDC>42858-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-162-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-162-01) </PackageDescription>
<NDC11Code>42858-0162-01</NDC11Code>
<ProductNDC>42858-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-163-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-163-01) </PackageDescription>
<NDC11Code>42858-0163-01</NDC11Code>
<ProductNDC>42858-163</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-164-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-164-01) </PackageDescription>
<NDC11Code>42858-0164-01</NDC11Code>
<ProductNDC>42858-164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-165-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-165-01) </PackageDescription>
<NDC11Code>42858-0165-01</NDC11Code>
<ProductNDC>42858-165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-166-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-166-01) </PackageDescription>
<NDC11Code>42858-0166-01</NDC11Code>
<ProductNDC>42858-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-167-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (42858-167-01) </PackageDescription>
<NDC11Code>42858-0167-01</NDC11Code>
<ProductNDC>42858-167</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
<NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215330</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisdexamfetamine Dimesylate Capsules are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O∙(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The capsule shells (imprinted with RP##) contain gelatin, titanium dioxide, and one or more of the following: D&C Red #28, FD&C Blue #1, FD&C Red #3, FD&C Red #40, FD&C Yellow #6, Iron Oxide Black, Iron Oxide Red, and Iron Oxide Yellow. Additionally, the imprint ink contains the following non-volatile ingredients: shellac, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-200-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (42858-200-01) </PackageDescription>
<NDC11Code>42858-0200-01</NDC11Code>
<ProductNDC>42858-200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170601</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075753</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170601</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fenofibrate Capsules, USP (micronized) is indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, triglycerides, and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb). Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below).</IndicationAndUsage>
<Description>Fenofibrate Capsules, USP (micronized) is a lipid regulating agent available as capsules for oral administration. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride; slightly soluble in alcohol; practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate, USP is a white or almost white crystalline powder which is stable under ordinary conditions. Each 67 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, FD&C Red #40, titanium dioxide, and gelatin. Each 134 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, D&C Red #28, FD&C Blue #1, titanium dioxide, and gelatin. Each 200 mg capsule contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, sodium lauryl sulfate, talc, FD&C Red #40, D&C Red #28, FDA/E172 yellow iron oxide, titanium dioxide, and gelatin. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>42858-320-12</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE, PLASTIC (42858-320-12) </PackageDescription>
<NDC11Code>42858-0320-12</NDC11Code>
<ProductNDC>42858-320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide</ProprietaryName>
<NonProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202955</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2; 10; 30</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is indicated for relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.</IndicationAndUsage>
<Description>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch aroma. Each 5 mL (1 teaspoonful) contains. In a palatable, aromatic vehicle. Inactive Ingredients: anhydrous citric acid, artificial butterscotch flavor, ethyl alcohol, FD&C Red #40, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate and sucrose. May also contain sodium citrate for pH adjustment. The pH range is between 4.0 and 5.5. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>42858-320-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (42858-320-16) </PackageDescription>
<NDC11Code>42858-0320-16</NDC11Code>
<ProductNDC>42858-320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide</ProprietaryName>
<NonProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride, And Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202955</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2; 10; 30</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is indicated for relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.</IndicationAndUsage>
<Description>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch aroma. Each 5 mL (1 teaspoonful) contains. In a palatable, aromatic vehicle. Inactive Ingredients: anhydrous citric acid, artificial butterscotch flavor, ethyl alcohol, FD&C Red #40, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate and sucrose. May also contain sodium citrate for pH adjustment. The pH range is between 4.0 and 5.5. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>42858-401-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-401-45) </PackageDescription>
<NDC11Code>42858-0401-45</NDC11Code>
<ProductNDC>42858-401</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-402-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-402-45) </PackageDescription>
<NDC11Code>42858-0402-45</NDC11Code>
<ProductNDC>42858-402</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-403-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-403-45) </PackageDescription>
<NDC11Code>42858-0403-45</NDC11Code>
<ProductNDC>42858-403</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-404-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-404-45) </PackageDescription>
<NDC11Code>42858-0404-45</NDC11Code>
<ProductNDC>42858-404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>42858-405-45</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (42858-405-45) </PackageDescription>
<NDC11Code>42858-0405-45</NDC11Code>
<ProductNDC>42858-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aptensio Xr</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205831</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>APTENSIO XR is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in patients 6 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>APTENSIO XR contains methylphenidate hydrochloride, a central nervous system (CNS) stimulant. APTENSIO XR capsules contain multi layered beads, which are composed of an immediate-release layer which contains approximately 40% of the methylphenidate dose, and a controlled release layer which contains approximately 60% of the methylphenidate dose. APTENSIO XR is available in seven capsule strengths. Each extended-release capsule for once-a-day oral administration contains 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, 50 mg, or 60 mg of methylphenidate HCl USP, which is equivalent to 8.6 mg, 13.0 mg, 17.3 mg, 25.9 mg, 34.6 mg, 43.2 mg, or 51.9 mg of methylphenidate free base, respectively. Chemically, methylphenidate HCl is d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride. Its molecular formula is C14H19NO2∙HCl. Its structural formula is. Methylphenidate hydrochloride USP is a white to off-white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77. Inactive Ingredients: ammonio methacrylate copolymer, type B; colloidal silicon dioxide (added if necessary); gelatin; hypromelloses; methacrylic acid copolymer, type C; polyethylene glycol; sugar spheres; talc; titanium oxide; and triethyl citrate. Each strength capsule also contains colorant ingredients in the capsule shell as follows. 10 mg: FD&C Blue No. 1. 15 mg: D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40. 20 mg: D&C Red No. 33, D&C Yellow No. 10. 30 mg: FD&C Blue No. 1, FD&C Red No. 3. 40 mg: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40. 50 mg: D&C Yellow No. 10, FD&C Green No. 3. 60 mg: Black Iron Oxide.</Description>
</NDC>
</NDCList>