{
"NDC": [
{
"NDCCode": "43353-867-60",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (43353-867-60)",
"NDC11Code": "43353-0867-60",
"ProductNDC": "43353-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril And Hydrochlorothiazide",
"NonProprietaryName": "Lisinopril And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076262",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LISINOPRIL; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "20; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Lisinopril and hydrochlorothiazide tablets are indicated for the treatment of hypertension. These fixed-dose combinations are not indicated for initial therapy (see DOSAGE AND ADMINISTRATION). In using lisinopril and hydrochlorothiazide tablets, consideration should be given to the fact that an angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that lisinopril does not have a similar risk. (See WARNINGS.). In considering use of lisinopril and hydrochlorothiazide tablets, it should be noted that Black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-Blacks. (See WARNINGS, Head and Neck Angioedema.).",
"Description": "Lisinopril and hydrochlorothiazide combines an angiotensin converting enzyme inhibitor, lisinopril, and a diuretic, hydrochlorothiazide. Lisinopril, a synthetic peptide derivative, is an oral long-acting angiotensin converting enzyme inhibitor. It is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.52. It is soluble in water, sparingly soluble in methanol, and practically insoluble in ethanol. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2 and its structural formula is: [Enter image caption here]. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.73, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Lisinopril and hydrochlorothiazide tablets are available for oral use in three tablet combinations of lisinopril with hydrochlorothiazide: lisinopril and hydrochlorothiazide tablets, 10 mg/12.5 mg, 20 mg/12.5 mg, and 20 mg/25 mg. Inactive ingredients are: calcium phosphate, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, and starch. Lisinopril and hydrochlorothiazide tablets, 10 mg/12.5 mg, and 20 mg/25 mg also contain iron oxides."
},
{
"NDCCode": "16590-867-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (16590-867-60)",
"NDC11Code": "16590-0867-60",
"ProductNDC": "16590-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078858",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Levetiracetam tablets are indicated as adjunctive therapy in the treatment of partial onset seizures in adults and children 4 years of age and older with epilepsy. Levetiracetam tablets are indicated as adjunctive therapy in the treatment of myoclonic seizures in adults and adolescents 12 years of age and older with juvenile myoclonic epilepsy. Levetiracetam tablets are indicated as adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in adults and children 6 years of age and older with idiopathic generalized epilepsy.",
"Description": "Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, polyethylene glycol 400, povidone, sodium starch glycolate, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue # 2 Lake of indigo carmine. 500 mg tablets: Ferric oxide yellow. 750 mg tablets: Ferric oxide red and FD&C # 6 lake of sunset yellow."
},
{
"NDCCode": "33261-867-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (33261-867-60)",
"NDC11Code": "33261-0867-60",
"ProductNDC": "33261-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077751",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Pravastatin sodium tablet is an HMG-CoA reductase inhibitor (statin) indicated as an adjunctive therapy to diet to: 1 Reduce the risk of MI, revascularization, and cardiovascular mortality in hypercholesterolemic patients without clinically evident CHD. (1.1) , 2 Reduce elevated Total-C, LDL-C, ApoB, and TG levels and to increase HDL-C in patients with primary hypercholesterolemia and mixed dyslipidemia. (1.2) , 3 Reduce elevated serum TG levels in patients with hypertriglyceridemia. (1.2) , 4 Treat patients with primary dysbetalipoproteinemia who are not responding to diet. (1.2), 5 Treat children and adolescent patients ages 8 years and older with heterozygous familial hypercholesterolemia after failing an adequate trial of diet therapy. (1.2).",
"Description": "Pravastatin sodium is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is white to yellowish white powder or crystalline powder, hygroscopic in nature. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is freely soluble in water and in methanol. Soluble in ethanol. Each pravastatin sodium tablet intended for oral administration contains 10 mg or 20 mg or 40 mg or 80 mg of pravastatin sodium. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyoxyl 35 castor oil and sodium carbonate anhydrous."
},
{
"NDCCode": "35356-867-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (35356-867-60)",
"NDC11Code": "35356-0867-60",
"ProductNDC": "35356-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19960308",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020254",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-04-11",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "42858-867-06",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (42858-867-06) ",
"NDC11Code": "42858-0867-06",
"ProductNDC": "42858-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dronabinol",
"NonProprietaryName": "Dronabinol",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078292",
"LabelerName": "Rhodes Pharmaceuticals L.P.",
"SubstanceName": "DRONABINOL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cannabinoid [EPC], Cannabinoids [CS]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180626",
"SamplePackage": "N",
"IndicationAndUsage": "DRONABINOL CAPSULES, USP are indicated in adults for the treatment of: 1 anorexia associated with weight loss in patients with Acquired Immune Deficiency Syndrome (AIDS)., 2 nausea and vomiting associated with cancer chemotherapy in patients who have failed to respond adequately to conventional antiemetic treatments.",
"Description": "Dronabinol is a cannabinoid designated chemically as (6aR,10aR)-6a,7,8,10a-Tetrahydro-6,6,9trimethyl-3-pentyl-6H-dibenzo[b,d]-pyran-1-ol. Dronabinol has the following empirical and structural formulas. C21H30O2 (molecular weight = 314.46). Dronabinol, the active ingredient in dronabinol capsules, USP, is synthetic delta-9 tetrahydrocannabinol (delta-9-THC). Dronabinol is a light yellow resinous oil that is sticky at room temperature and hardens upon refrigeration. Dronabinol is insoluble in water and is formulated in sesame oil. It has a pKa of 10.6 and an octanol-water partition coefficient: 6,000:1 at pH 7. Dronabinol capsule strengths are formulated with the following inactive ingredients: FD&C Yellow No. 6, gelatin, glycerin, purified water, sesame oil, titanium dioxide, iron oxide blackIngredients in imprint ink, shellac glaze, isopropyl alcohol, n-butyl alcohol, propylene glycol, and ammonium hydroxide. The 2.5 mg and 5 mg capsules also contain FD&C Blue No. 1 and FD&C Red No. 40."
},
{
"NDCCode": "43063-867-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-867-60) ",
"NDC11Code": "43063-0867-60",
"ProductNDC": "43063-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151230",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090796",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (< 1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone . The structural formula is represented below:. Ibuprofen tablets, a nonsteroidal anti-inflammatory drug ( NSAID ), are available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycols, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide."
},
{
"NDCCode": "45865-867-60",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (45865-867-60) ",
"NDC11Code": "45865-0867-60",
"ProductNDC": "45865-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen",
"NonProprietaryName": "Naproxen",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19980729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075227",
"LabelerName": "medsource pharmaceuticals",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "Naproxen delayed-release tablets are indicated for. The relief of the signs and symptoms of: 1 rheumatoid arthritis , 2 osteoarthritis , 3 ankylosing spondylitis , 4 Polyarticular Juvenile Idiopathic Arthritis .",
"Description": "Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of non-steroidal anti-inflammatory drugs. The chemical name for naproxen, USP is (+)-6-methoxy-α-methyl-2-naphthaleneacetic acid. It has the following structural formula. C 14H 14O 3 M.W. 230.26. Naproxen, USP is a practically odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen, USP at pH 7.4 is 1.6 to 1.8. Naproxen Delayed-Release Tablets USP are available as enteric-coated, white to off-white tablets containing 375 mg or 500 mg of naproxen, USP for oral administration. The inactive ingredients are: antifoam DC 1510, corn starch, croscarmellose sodium, FD&C Blue # 2 Aluminum Lake, magnesium stearate, methacrylic acid copolymer-dispersion, povidone, propylene glycol, shellac, talc, titanium dioxide, and triethyl citrate. The dissolution of this enteric-coated naproxen tablet is pH dependent with rapid dissolution above pH 6. There is no dissolution below pH 4."
},
{
"NDCCode": "49884-867-02",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (49884-867-02) ",
"NDC11Code": "49884-0867-02",
"ProductNDC": "49884-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dronabinol",
"NonProprietaryName": "Dronabinol",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078292",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "DRONABINOL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cannabinoid [EPC], Cannabinoids [CS]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2020-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20080630",
"EndMarketingDatePackage": "20200131",
"SamplePackage": "N"
},
{
"NDCCode": "55700-867-60",
"PackageDescription": "60 POUCH in 1 BOX (55700-867-60) > 1 FILM, SOLUBLE in 1 POUCH",
"NDC11Code": "55700-0867-60",
"ProductNDC": "55700-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Belbuca",
"NonProprietaryName": "Buprenorphine Hydrochloride",
"DosageFormName": "FILM, SOLUBLE",
"RouteName": "BUCCAL",
"StartMarketingDate": "20200602",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA207932",
"LabelerName": "Quality Care Products, LLC",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE",
"StrengthNumber": "450",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200602",
"SamplePackage": "N",
"IndicationAndUsage": "BELBUCA is indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate.",
"Description": "BELBUCA is a buccal film that provides transmucosal delivery of buprenorphine, a partial opioid agonist. BELBUCA is a rectangular bi-layer, peppermint-flavored, buccal film with rounded corners, consisting of a white to off-white backing layer with strength identifier printed in black ink and a light yellow to yellow active mucoadhesive layer containing buprenorphine hydrochloride. The yellow side of the film is applied to the inside of the cheek where it adheres to the moist buccal mucosa to deliver the drug as the film dissolves. Buprenorphine hydrochloride USP is the active ingredient in BELBUCA. The chemical name of buprenorphine hydrochloride is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-α-methyl-, hydrochloride, [5α, 7α, (S)]. Its structural formula is as follows. The molecular weight of buprenorphine hydrochloride is 504.10; the empirical formula is C29H41NO4∙HCl. Buprenorphine hydrochloride occurs as a white or off-white crystalline powder. It is sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. The pKa is 8.5 for the amine function and 10.0 for the phenol function. Dosage strengths of BELBUCA are based on the active moiety, buprenorphine. BELBUCA is available as 75 mcg, 150 mcg, 300 mcg, 450 mcg, 600 mcg, 750 mcg, and 900 mcg buprenorphine per film. The strength of each film is dependent on the buprenorphine concentration in the formulation and the surface area of the film. Table 6 lists the dosage strength, equivalent amount of buprenorphine hydrochloride USP (active ingredient), unique identifier and film size for each strength. Each buccal film also contains carboxymethylcellulose sodium USP, citric acid anhydrous USP, hydroxyethylcellulose NF, hydroxypropylcellulose NF, methylparaben NF, monobasic sodium phosphate anhydrous USP, peppermint oil NF, polycarbophil USP, propylene glycol USP, propylparaben NF, sodium benzoate NF, sodium hydroxide NF, saccharin sodium NF, titanium dioxide USP, vitamin E acetate USP, yellow iron oxide, purified water USP, and TekPrint SW-9008 black ink (shellac NF, black iron oxide NF)."
},
{
"NDCCode": "59726-867-60",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (59726-867-60) / 60 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "59726-0867-60",
"ProductNDC": "59726-867",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Low Dose Aspirin",
"ProprietaryNameSuffix": "Enteric Safety-coated",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190331",
"EndMarketingDate": "20251231",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "P & L Development, LLC",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190331",
"EndMarketingDatePackage": "20251231",
"SamplePackage": "N"
},
{
"NDCCode": "63187-867-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (63187-867-60) ",
"NDC11Code": "63187-0867-60",
"ProductNDC": "63187-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071135",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170601",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: anhydrous lactose, magnesium stearate and microcrystalline cellulose. Diazepam Tablets USP 5 mg also contain D&C Yellow No. 10. Diazepam Tablets USP 10 mg also contain FD&C Blue No. 1."
},
{
"NDCCode": "71205-867-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71205-867-60) ",
"NDC11Code": "71205-0867-60",
"ProductNDC": "71205-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranolazine",
"NonProprietaryName": "Ranolazine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210824",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211829",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "RANOLAZINE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-04-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211217",
"SamplePackage": "N",
"IndicationAndUsage": "Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.",
"Description": "Ranolazine is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white crystalline powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: microcrystalline cellulose, methacrylic acid and ethyl acrylate copolymer, sodium lauryl sulfate, polysorbate 80, hypromellose, sodium hydroxide and magnesium stearate. Additional inactive ingredients for the 500 mg tablet include hydroxypropyl methyl cellulose, titanium dioxide, lactose monohydrate, polyethylene glycol, triacetin, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include hydroxypropyl methyl cellulose, titanium dioxide, lactose monohydrate, polyethylene glycol, triacetin and Iron Oxide Yellow."
},
{
"NDCCode": "71610-867-53",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-867-53) ",
"NDC11Code": "71610-0867-53",
"ProductNDC": "71610-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207427",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2025-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24."
},
{
"NDCCode": "71610-867-60",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-867-60) ",
"NDC11Code": "71610-0867-60",
"ProductNDC": "71610-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207427",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2025-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241125",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24."
},
{
"NDCCode": "60760-867-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (60760-867-30) ",
"NDC11Code": "60760-0867-30",
"ProductNDC": "60760-867",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078703",
"LabelerName": "St. Mary's Medical Park Pharmacy",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250519",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol Hydrochloride Extended-Release Capsules, USP, are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol Hydrochloride Extended-Release Capsules, USP, are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor-blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol Hydrochloride Extended-Release Capsules, USP, are formulated to provide a sustained release of propranolol hydrochloride. Propranolol Hydrochloride Extended-Release Capsules, USP, are available as 60 mg, 80 mg, 120 mg, and 160 mg capsules for oral administration. Each capsule for oral administration contains sugar spheres, ethylcellulose, hypromellose phthalate, povidone, diethyl phthalate, polyethylene glycol, titanium dioxide, ammonium hydroxide, potassium hydroxide, black iron oxide, and gelatin. The 80 mg, 120 mg, and 160 mg capsules contain red and yellow iron oxide. In addition, the 160 mg capsules contain FD&C Blue No. 2. These capsules comply with USP Dissolution Test 1."
},
{
"NDCCode": "43353-007-60",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (43353-007-60) ",
"NDC11Code": "43353-0007-60",
"ProductNDC": "43353-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simvastatin",
"NonProprietaryName": "Simvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20061220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077691",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "SIMVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180518",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin tablets can be started simultaneously with diet.",
"Description": "Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β (2S*,4S*),-8aβ]]. The molecular formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin USP and the following inactive ingredients: ascorbic acid, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), hydroxypropyl cellulose, hypromellose, titanium dioxide, talc, citric acid monohydrate, isopropyl alcohol, magnesium stearate and butylated hydroxyanisole. Simvastatin 5 mg also contains ferric oxide yellow, simvastatin 10 mg and simvastatin 20 mg also contains ferric oxide red and ferric oxide yellow, simvastatin 40 mg and simvastatin 80 mg also contains ferric oxide red."
},
{
"NDCCode": "43353-009-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-009-60) ",
"NDC11Code": "43353-0009-60",
"ProductNDC": "43353-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140315",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203508",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150316",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril Tablets, USP are indicated for the treatment of hypertension to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including lisinopril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents.",
"Description": "Lisinopril, USP is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, USP a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L- proline dihydrate. Its molecular formula is C21H31N3O5 2H2O and its structural formula is:. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate. 5 mg, 10 mg, 20 mg and 30 mg tablets – lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, iron oxide red. 40 mg tablets - lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, iron oxide yellow."
},
{
"NDCCode": "43353-010-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-010-60) ",
"NDC11Code": "43353-0010-60",
"ProductNDC": "43353-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040779",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150324",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and Codeine Phosphate Tablets, USP are indicated for the relief of mild to moderately severe pain.",
"Description": "Each tablet contains. Acetaminophen, USP……………………………………………………..300 mg. Codeine Phosphate, USP…………………………………………………...30 mg. (Warning: May be habit forming). Inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanlllde, IS a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate: 7,8-didehydro-4,5α-epoxy-3-methoxy-l7-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula."
},
{
"NDCCode": "43353-011-60",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (43353-011-60)",
"NDC11Code": "43353-0011-60",
"ProductNDC": "43353-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077745",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Quetiapine Fumarate Tablets are an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2).",
"Description": "Quetiapine Fumarate Tablets are a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. The structural formula is. C42H50N6O4S2C4H4O4 M.W. 883.11 (fumarate salt). Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine Fumarate Tablets are supplied for oral administration as 25 mg (round, light orange), 50 mg (round, white to off-white), 100 mg (round, light orange), 200 mg (round, white to off-white), 300 mg (capsule-shaped, pale yellow), and 400 mg (capsule-shaped, white to off-white) tablets. Inactive ingredients are colloidal silicon dioxide, dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, titanium dioxide and triacetin. Additionally, the 25 mg, 100 mg, and 300 mg tablets contain iron oxide yellow; the 25 mg and 100 mg tablets contain FD&C yellow #6/sunset yellow FCF/aluminum lake; and the 50 mg, 200 mg, and 400 mg tablets contain polydextrose and polyethylene glycol."
},
{
"NDCCode": "43353-013-53",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (43353-013-53)",
"NDC11Code": "43353-0013-53",
"ProductNDC": "43353-013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078015",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Tamsulosin hydrochloride capsules, USP are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition each capsule contains the following inactive ingredients: colloidal silicon dioxide, methacrylic acid copolymer, microcrystalline cellulose, polyacrylate dispersion, polysorbate 80, sodium lauryl sulfate and talc. The capsule shell consists of FD&C Blue # 2, gelatin, iron oxide red, iron oxide yellow and titanium dioxide. The capsule is printed with black pharmaceutical ink which is made of iron oxide black, propylene glycol and shellac. USP dissolution test 7 used."
},
{
"NDCCode": "43353-013-60",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (43353-013-60)",
"NDC11Code": "43353-0013-60",
"ProductNDC": "43353-013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078015",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Tamsulosin hydrochloride capsules, USP are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition each capsule contains the following inactive ingredients: colloidal silicon dioxide, methacrylic acid copolymer, microcrystalline cellulose, polyacrylate dispersion, polysorbate 80, sodium lauryl sulfate and talc. The capsule shell consists of FD&C Blue # 2, gelatin, iron oxide red, iron oxide yellow and titanium dioxide. The capsule is printed with black pharmaceutical ink which is made of iron oxide black, propylene glycol and shellac. USP dissolution test 7 used."
},
{
"NDCCode": "43353-016-60",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (43353-016-60)",
"NDC11Code": "43353-0016-60",
"ProductNDC": "43353-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077118",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Metoprolol succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets USP are indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris (1.2) , 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin.(1.3).",
"Description": "Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended release tablets. Metoprolol succinate extended-release tablets USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: cellulose acetate butyrate, corn starch, crospovidone, glyceryl monostearate, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, poloxamer 188, polyethylene glycol, polysorbate 80, sucrose, and titanium dioxide. Meets USP Dissolution test 2."
},
{
"NDCCode": "43353-018-53",
"PackageDescription": "60 TABLET in 1 BOTTLE (43353-018-53)",
"NDC11Code": "43353-0018-53",
"ProductNDC": "43353-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077293",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "FUROSEMIDE TABLET is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. FUROSEMIDE TABLET is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "FUROSEMIDE TABLET is a diuretic which is an anthranilic acid derivative. FUROSEMIDE TABLET for oral administration contain furosemide as the active ingredient and the following inactive ingredients: lactose anhydrous NF, magnesium stearate NF, starch NF, microcrystalline cellulose NF, sodium starch Glycolate NF, and colloidal silicon dioxide NF. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. FUROSEMIDE TABLET is available as white tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows."
},
{
"NDCCode": "43353-018-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-018-60)",
"NDC11Code": "43353-0018-60",
"ProductNDC": "43353-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077293",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "FUROSEMIDE TABLET is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. FUROSEMIDE TABLET is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "FUROSEMIDE TABLET is a diuretic which is an anthranilic acid derivative. FUROSEMIDE TABLET for oral administration contain furosemide as the active ingredient and the following inactive ingredients: lactose anhydrous NF, magnesium stearate NF, starch NF, microcrystalline cellulose NF, sodium starch Glycolate NF, and colloidal silicon dioxide NF. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. FUROSEMIDE TABLET is available as white tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows."
},
{
"NDCCode": "43353-019-53",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (43353-019-53)",
"NDC11Code": "43353-0019-53",
"ProductNDC": "43353-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090931",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide.It meets USP Dissolution Test 9."
},
{
"NDCCode": "43353-019-60",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (43353-019-60)",
"NDC11Code": "43353-0019-60",
"ProductNDC": "43353-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090931",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide.It meets USP Dissolution Test 9."
},
{
"NDCCode": "43353-021-53",
"PackageDescription": "60 TABLET in 1 BOTTLE (43353-021-53) ",
"NDC11Code": "43353-0021-53",
"ProductNDC": "43353-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090935",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150426",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free."
},
{
"NDCCode": "43353-021-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-021-60) ",
"NDC11Code": "43353-0021-60",
"ProductNDC": "43353-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090935",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150426",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free."
},
{
"NDCCode": "43353-023-53",
"PackageDescription": "60 TABLET in 1 BOTTLE (43353-023-53) ",
"NDC11Code": "43353-0023-53",
"ProductNDC": "43353-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090935",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150426",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free."
},
{
"NDCCode": "43353-023-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (43353-023-60) ",
"NDC11Code": "43353-0023-60",
"ProductNDC": "43353-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090935",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150426",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43353-867-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (43353-867-60)</PackageDescription>
<NDC11Code>43353-0867-60</NDC11Code>
<ProductNDC>43353-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Lisinopril And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076262</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LISINOPRIL; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>20; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril and hydrochlorothiazide tablets are indicated for the treatment of hypertension. These fixed-dose combinations are not indicated for initial therapy (see DOSAGE AND ADMINISTRATION). In using lisinopril and hydrochlorothiazide tablets, consideration should be given to the fact that an angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that lisinopril does not have a similar risk. (See WARNINGS.). In considering use of lisinopril and hydrochlorothiazide tablets, it should be noted that Black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-Blacks. (See WARNINGS, Head and Neck Angioedema.).</IndicationAndUsage>
<Description>Lisinopril and hydrochlorothiazide combines an angiotensin converting enzyme inhibitor, lisinopril, and a diuretic, hydrochlorothiazide. Lisinopril, a synthetic peptide derivative, is an oral long-acting angiotensin converting enzyme inhibitor. It is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is:. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.52. It is soluble in water, sparingly soluble in methanol, and practically insoluble in ethanol. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2 and its structural formula is: [Enter image caption here]. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.73, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Lisinopril and hydrochlorothiazide tablets are available for oral use in three tablet combinations of lisinopril with hydrochlorothiazide: lisinopril and hydrochlorothiazide tablets, 10 mg/12.5 mg, 20 mg/12.5 mg, and 20 mg/25 mg. Inactive ingredients are: calcium phosphate, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, and starch. Lisinopril and hydrochlorothiazide tablets, 10 mg/12.5 mg, and 20 mg/25 mg also contain iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>16590-867-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (16590-867-60)</PackageDescription>
<NDC11Code>16590-0867-60</NDC11Code>
<ProductNDC>16590-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078858</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levetiracetam tablets are indicated as adjunctive therapy in the treatment of partial onset seizures in adults and children 4 years of age and older with epilepsy. Levetiracetam tablets are indicated as adjunctive therapy in the treatment of myoclonic seizures in adults and adolescents 12 years of age and older with juvenile myoclonic epilepsy. Levetiracetam tablets are indicated as adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in adults and children 6 years of age and older with idiopathic generalized epilepsy.</IndicationAndUsage>
<Description>Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, polyethylene glycol 400, povidone, sodium starch glycolate, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue # 2 Lake of indigo carmine. 500 mg tablets: Ferric oxide yellow. 750 mg tablets: Ferric oxide red and FD&C # 6 lake of sunset yellow.</Description>
</NDC>
<NDC>
<NDCCode>33261-867-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (33261-867-60)</PackageDescription>
<NDC11Code>33261-0867-60</NDC11Code>
<ProductNDC>33261-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077751</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pravastatin sodium tablet is an HMG-CoA reductase inhibitor (statin) indicated as an adjunctive therapy to diet to: 1 Reduce the risk of MI, revascularization, and cardiovascular mortality in hypercholesterolemic patients without clinically evident CHD. (1.1) , 2 Reduce elevated Total-C, LDL-C, ApoB, and TG levels and to increase HDL-C in patients with primary hypercholesterolemia and mixed dyslipidemia. (1.2) , 3 Reduce elevated serum TG levels in patients with hypertriglyceridemia. (1.2) , 4 Treat patients with primary dysbetalipoproteinemia who are not responding to diet. (1.2), 5 Treat children and adolescent patients ages 8 years and older with heterozygous familial hypercholesterolemia after failing an adequate trial of diet therapy. (1.2).</IndicationAndUsage>
<Description>Pravastatin sodium is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is white to yellowish white powder or crystalline powder, hygroscopic in nature. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7. It is freely soluble in water and in methanol. Soluble in ethanol. Each pravastatin sodium tablet intended for oral administration contains 10 mg or 20 mg or 40 mg or 80 mg of pravastatin sodium. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyoxyl 35 castor oil and sodium carbonate anhydrous.</Description>
</NDC>
<NDC>
<NDCCode>35356-867-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (35356-867-60)</PackageDescription>
<NDC11Code>35356-0867-60</NDC11Code>
<ProductNDC>35356-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960308</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020254</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-11</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>42858-867-06</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (42858-867-06) </PackageDescription>
<NDC11Code>42858-0867-06</NDC11Code>
<ProductNDC>42858-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dronabinol</ProprietaryName>
<NonProprietaryName>Dronabinol</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078292</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals L.P.</LabelerName>
<SubstanceName>DRONABINOL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cannabinoid [EPC], Cannabinoids [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DRONABINOL CAPSULES, USP are indicated in adults for the treatment of: 1 anorexia associated with weight loss in patients with Acquired Immune Deficiency Syndrome (AIDS)., 2 nausea and vomiting associated with cancer chemotherapy in patients who have failed to respond adequately to conventional antiemetic treatments.</IndicationAndUsage>
<Description>Dronabinol is a cannabinoid designated chemically as (6aR,10aR)-6a,7,8,10a-Tetrahydro-6,6,9trimethyl-3-pentyl-6H-dibenzo[b,d]-pyran-1-ol. Dronabinol has the following empirical and structural formulas. C21H30O2 (molecular weight = 314.46). Dronabinol, the active ingredient in dronabinol capsules, USP, is synthetic delta-9 tetrahydrocannabinol (delta-9-THC). Dronabinol is a light yellow resinous oil that is sticky at room temperature and hardens upon refrigeration. Dronabinol is insoluble in water and is formulated in sesame oil. It has a pKa of 10.6 and an octanol-water partition coefficient: 6,000:1 at pH 7. Dronabinol capsule strengths are formulated with the following inactive ingredients: FD&C Yellow No. 6, gelatin, glycerin, purified water, sesame oil, titanium dioxide, iron oxide blackIngredients in imprint ink, shellac glaze, isopropyl alcohol, n-butyl alcohol, propylene glycol, and ammonium hydroxide. The 2.5 mg and 5 mg capsules also contain FD&C Blue No. 1 and FD&C Red No. 40.</Description>
</NDC>
<NDC>
<NDCCode>43063-867-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-867-60) </PackageDescription>
<NDC11Code>43063-0867-60</NDC11Code>
<ProductNDC>43063-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151230</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090796</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (< 1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone . The structural formula is represented below:. Ibuprofen tablets, a nonsteroidal anti-inflammatory drug ( NSAID ), are available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycols, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>45865-867-60</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (45865-867-60) </PackageDescription>
<NDC11Code>45865-0867-60</NDC11Code>
<ProductNDC>45865-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen</ProprietaryName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075227</ApplicationNumber>
<LabelerName>medsource pharmaceuticals</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naproxen delayed-release tablets are indicated for. The relief of the signs and symptoms of: 1 rheumatoid arthritis , 2 osteoarthritis , 3 ankylosing spondylitis , 4 Polyarticular Juvenile Idiopathic Arthritis .</IndicationAndUsage>
<Description>Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of non-steroidal anti-inflammatory drugs. The chemical name for naproxen, USP is (+)-6-methoxy-α-methyl-2-naphthaleneacetic acid. It has the following structural formula. C 14H 14O 3 M.W. 230.26. Naproxen, USP is a practically odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen, USP at pH 7.4 is 1.6 to 1.8. Naproxen Delayed-Release Tablets USP are available as enteric-coated, white to off-white tablets containing 375 mg or 500 mg of naproxen, USP for oral administration. The inactive ingredients are: antifoam DC 1510, corn starch, croscarmellose sodium, FD&C Blue # 2 Aluminum Lake, magnesium stearate, methacrylic acid copolymer-dispersion, povidone, propylene glycol, shellac, talc, titanium dioxide, and triethyl citrate. The dissolution of this enteric-coated naproxen tablet is pH dependent with rapid dissolution above pH 6. There is no dissolution below pH 4.</Description>
</NDC>
<NDC>
<NDCCode>49884-867-02</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (49884-867-02) </PackageDescription>
<NDC11Code>49884-0867-02</NDC11Code>
<ProductNDC>49884-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dronabinol</ProprietaryName>
<NonProprietaryName>Dronabinol</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078292</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>DRONABINOL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cannabinoid [EPC], Cannabinoids [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080630</StartMarketingDatePackage>
<EndMarketingDatePackage>20200131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55700-867-60</NDCCode>
<PackageDescription>60 POUCH in 1 BOX (55700-867-60) > 1 FILM, SOLUBLE in 1 POUCH</PackageDescription>
<NDC11Code>55700-0867-60</NDC11Code>
<ProductNDC>55700-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Belbuca</ProprietaryName>
<NonProprietaryName>Buprenorphine Hydrochloride</NonProprietaryName>
<DosageFormName>FILM, SOLUBLE</DosageFormName>
<RouteName>BUCCAL</RouteName>
<StartMarketingDate>20200602</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA207932</ApplicationNumber>
<LabelerName>Quality Care Products, LLC</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BELBUCA is indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>BELBUCA is a buccal film that provides transmucosal delivery of buprenorphine, a partial opioid agonist. BELBUCA is a rectangular bi-layer, peppermint-flavored, buccal film with rounded corners, consisting of a white to off-white backing layer with strength identifier printed in black ink and a light yellow to yellow active mucoadhesive layer containing buprenorphine hydrochloride. The yellow side of the film is applied to the inside of the cheek where it adheres to the moist buccal mucosa to deliver the drug as the film dissolves. Buprenorphine hydrochloride USP is the active ingredient in BELBUCA. The chemical name of buprenorphine hydrochloride is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-α-methyl-, hydrochloride, [5α, 7α, (S)]. Its structural formula is as follows. The molecular weight of buprenorphine hydrochloride is 504.10; the empirical formula is C29H41NO4∙HCl. Buprenorphine hydrochloride occurs as a white or off-white crystalline powder. It is sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. The pKa is 8.5 for the amine function and 10.0 for the phenol function. Dosage strengths of BELBUCA are based on the active moiety, buprenorphine. BELBUCA is available as 75 mcg, 150 mcg, 300 mcg, 450 mcg, 600 mcg, 750 mcg, and 900 mcg buprenorphine per film. The strength of each film is dependent on the buprenorphine concentration in the formulation and the surface area of the film. Table 6 lists the dosage strength, equivalent amount of buprenorphine hydrochloride USP (active ingredient), unique identifier and film size for each strength. Each buccal film also contains carboxymethylcellulose sodium USP, citric acid anhydrous USP, hydroxyethylcellulose NF, hydroxypropylcellulose NF, methylparaben NF, monobasic sodium phosphate anhydrous USP, peppermint oil NF, polycarbophil USP, propylene glycol USP, propylparaben NF, sodium benzoate NF, sodium hydroxide NF, saccharin sodium NF, titanium dioxide USP, vitamin E acetate USP, yellow iron oxide, purified water USP, and TekPrint SW-9008 black ink (shellac NF, black iron oxide NF).</Description>
</NDC>
<NDC>
<NDCCode>59726-867-60</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (59726-867-60) / 60 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>59726-0867-60</NDC11Code>
<ProductNDC>59726-867</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Low Dose Aspirin</ProprietaryName>
<ProprietaryNameSuffix>Enteric Safety-coated</ProprietaryNameSuffix>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190331</StartMarketingDate>
<EndMarketingDate>20251231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>P & L Development, LLC</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190331</StartMarketingDatePackage>
<EndMarketingDatePackage>20251231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63187-867-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (63187-867-60) </PackageDescription>
<NDC11Code>63187-0867-60</NDC11Code>
<ProductNDC>63187-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071135</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: anhydrous lactose, magnesium stearate and microcrystalline cellulose. Diazepam Tablets USP 5 mg also contain D&C Yellow No. 10. Diazepam Tablets USP 10 mg also contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>71205-867-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71205-867-60) </PackageDescription>
<NDC11Code>71205-0867-60</NDC11Code>
<ProductNDC>71205-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranolazine</ProprietaryName>
<NonProprietaryName>Ranolazine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210824</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211829</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>RANOLAZINE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.</IndicationAndUsage>
<Description>Ranolazine is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white crystalline powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: microcrystalline cellulose, methacrylic acid and ethyl acrylate copolymer, sodium lauryl sulfate, polysorbate 80, hypromellose, sodium hydroxide and magnesium stearate. Additional inactive ingredients for the 500 mg tablet include hydroxypropyl methyl cellulose, titanium dioxide, lactose monohydrate, polyethylene glycol, triacetin, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include hydroxypropyl methyl cellulose, titanium dioxide, lactose monohydrate, polyethylene glycol, triacetin and Iron Oxide Yellow.</Description>
</NDC>
<NDC>
<NDCCode>71610-867-53</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-867-53) </PackageDescription>
<NDC11Code>71610-0867-53</NDC11Code>
<ProductNDC>71610-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207427</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24.</Description>
</NDC>
<NDC>
<NDCCode>71610-867-60</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-867-60) </PackageDescription>
<NDC11Code>71610-0867-60</NDC11Code>
<ProductNDC>71610-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207427</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in patients with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-release Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride .The structural formula is as shown below:. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5.HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.86. Metformin Hydrochloride Extended-release Tablets USP, contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-release Tablets, USP 500 mg and 750 mg contain the inactive ingredients hypromellose, microcrystalline cellulose, povidone, sodium carboxymethyl cellulose, and magnesium stearate. System Components and Performance-Metformin Hydrochloride Extended-release Tablets comprises a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymers to form a monophasic matrix system. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. Dissolution Method: Test 24.</Description>
</NDC>
<NDC>
<NDCCode>60760-867-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (60760-867-30) </PackageDescription>
<NDC11Code>60760-0867-30</NDC11Code>
<ProductNDC>60760-867</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078703</ApplicationNumber>
<LabelerName>St. Mary's Medical Park Pharmacy</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol Hydrochloride Extended-Release Capsules, USP, are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol Hydrochloride Extended-Release Capsules, USP, are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor-blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol Hydrochloride Extended-Release Capsules, USP, are formulated to provide a sustained release of propranolol hydrochloride. Propranolol Hydrochloride Extended-Release Capsules, USP, are available as 60 mg, 80 mg, 120 mg, and 160 mg capsules for oral administration. Each capsule for oral administration contains sugar spheres, ethylcellulose, hypromellose phthalate, povidone, diethyl phthalate, polyethylene glycol, titanium dioxide, ammonium hydroxide, potassium hydroxide, black iron oxide, and gelatin. The 80 mg, 120 mg, and 160 mg capsules contain red and yellow iron oxide. In addition, the 160 mg capsules contain FD&C Blue No. 2. These capsules comply with USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>43353-007-60</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (43353-007-60) </PackageDescription>
<NDC11Code>43353-0007-60</NDC11Code>
<ProductNDC>43353-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simvastatin</ProprietaryName>
<NonProprietaryName>Simvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077691</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>SIMVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β (2S*,4S*),-8aβ]]. The molecular formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin USP and the following inactive ingredients: ascorbic acid, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), hydroxypropyl cellulose, hypromellose, titanium dioxide, talc, citric acid monohydrate, isopropyl alcohol, magnesium stearate and butylated hydroxyanisole. Simvastatin 5 mg also contains ferric oxide yellow, simvastatin 10 mg and simvastatin 20 mg also contains ferric oxide red and ferric oxide yellow, simvastatin 40 mg and simvastatin 80 mg also contains ferric oxide red.</Description>
</NDC>
<NDC>
<NDCCode>43353-009-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-009-60) </PackageDescription>
<NDC11Code>43353-0009-60</NDC11Code>
<ProductNDC>43353-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140315</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203508</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril Tablets, USP are indicated for the treatment of hypertension to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including lisinopril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril may be administered alone or with other antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril, USP is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, USP a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L- proline dihydrate. Its molecular formula is C21H31N3O5 2H2O and its structural formula is:. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate. 5 mg, 10 mg, 20 mg and 30 mg tablets – lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, iron oxide red. 40 mg tablets - lactose monohydrate, maize starch, colloidal silicon dioxide, magnesium stearate, iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>43353-010-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-010-60) </PackageDescription>
<NDC11Code>43353-0010-60</NDC11Code>
<ProductNDC>43353-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040779</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and Codeine Phosphate Tablets, USP are indicated for the relief of mild to moderately severe pain.</IndicationAndUsage>
<Description>Each tablet contains. Acetaminophen, USP……………………………………………………..300 mg. Codeine Phosphate, USP…………………………………………………...30 mg. (Warning: May be habit forming). Inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanlllde, IS a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate: 7,8-didehydro-4,5α-epoxy-3-methoxy-l7-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>43353-011-60</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (43353-011-60)</PackageDescription>
<NDC11Code>43353-0011-60</NDC11Code>
<ProductNDC>43353-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077745</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Quetiapine Fumarate Tablets are an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
<Description>Quetiapine Fumarate Tablets are a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. The structural formula is. C42H50N6O4S2C4H4O4 M.W. 883.11 (fumarate salt). Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine Fumarate Tablets are supplied for oral administration as 25 mg (round, light orange), 50 mg (round, white to off-white), 100 mg (round, light orange), 200 mg (round, white to off-white), 300 mg (capsule-shaped, pale yellow), and 400 mg (capsule-shaped, white to off-white) tablets. Inactive ingredients are colloidal silicon dioxide, dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, titanium dioxide and triacetin. Additionally, the 25 mg, 100 mg, and 300 mg tablets contain iron oxide yellow; the 25 mg and 100 mg tablets contain FD&C yellow #6/sunset yellow FCF/aluminum lake; and the 50 mg, 200 mg, and 400 mg tablets contain polydextrose and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43353-013-53</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (43353-013-53)</PackageDescription>
<NDC11Code>43353-0013-53</NDC11Code>
<ProductNDC>43353-013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078015</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Tamsulosin hydrochloride capsules, USP are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition each capsule contains the following inactive ingredients: colloidal silicon dioxide, methacrylic acid copolymer, microcrystalline cellulose, polyacrylate dispersion, polysorbate 80, sodium lauryl sulfate and talc. The capsule shell consists of FD&C Blue # 2, gelatin, iron oxide red, iron oxide yellow and titanium dioxide. The capsule is printed with black pharmaceutical ink which is made of iron oxide black, propylene glycol and shellac. USP dissolution test 7 used.</Description>
</NDC>
<NDC>
<NDCCode>43353-013-60</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (43353-013-60)</PackageDescription>
<NDC11Code>43353-0013-60</NDC11Code>
<ProductNDC>43353-013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078015</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES (14)]. Tamsulosin hydrochloride capsules, USP are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition each capsule contains the following inactive ingredients: colloidal silicon dioxide, methacrylic acid copolymer, microcrystalline cellulose, polyacrylate dispersion, polysorbate 80, sodium lauryl sulfate and talc. The capsule shell consists of FD&C Blue # 2, gelatin, iron oxide red, iron oxide yellow and titanium dioxide. The capsule is printed with black pharmaceutical ink which is made of iron oxide black, propylene glycol and shellac. USP dissolution test 7 used.</Description>
</NDC>
<NDC>
<NDCCode>43353-016-60</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (43353-016-60)</PackageDescription>
<NDC11Code>43353-0016-60</NDC11Code>
<ProductNDC>43353-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077118</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metoprolol succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets USP are indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris (1.2) , 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin.(1.3).</IndicationAndUsage>
<Description>Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended release tablets. Metoprolol succinate extended-release tablets USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: cellulose acetate butyrate, corn starch, crospovidone, glyceryl monostearate, hypromellose, methacrylic acid copolymer, microcrystalline cellulose, poloxamer 188, polyethylene glycol, polysorbate 80, sucrose, and titanium dioxide. Meets USP Dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>43353-018-53</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43353-018-53)</PackageDescription>
<NDC11Code>43353-0018-53</NDC11Code>
<ProductNDC>43353-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077293</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>FUROSEMIDE TABLET is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. FUROSEMIDE TABLET is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>FUROSEMIDE TABLET is a diuretic which is an anthranilic acid derivative. FUROSEMIDE TABLET for oral administration contain furosemide as the active ingredient and the following inactive ingredients: lactose anhydrous NF, magnesium stearate NF, starch NF, microcrystalline cellulose NF, sodium starch Glycolate NF, and colloidal silicon dioxide NF. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. FUROSEMIDE TABLET is available as white tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows.</Description>
</NDC>
<NDC>
<NDCCode>43353-018-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-018-60)</PackageDescription>
<NDC11Code>43353-0018-60</NDC11Code>
<ProductNDC>43353-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077293</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>FUROSEMIDE TABLET is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. FUROSEMIDE TABLET is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>FUROSEMIDE TABLET is a diuretic which is an anthranilic acid derivative. FUROSEMIDE TABLET for oral administration contain furosemide as the active ingredient and the following inactive ingredients: lactose anhydrous NF, magnesium stearate NF, starch NF, microcrystalline cellulose NF, sodium starch Glycolate NF, and colloidal silicon dioxide NF. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. FUROSEMIDE TABLET is available as white tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows.</Description>
</NDC>
<NDC>
<NDCCode>43353-019-53</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (43353-019-53)</PackageDescription>
<NDC11Code>43353-0019-53</NDC11Code>
<ProductNDC>43353-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090931</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide.It meets USP Dissolution Test 9.</Description>
</NDC>
<NDC>
<NDCCode>43353-019-60</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (43353-019-60)</PackageDescription>
<NDC11Code>43353-0019-60</NDC11Code>
<ProductNDC>43353-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090931</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide.It meets USP Dissolution Test 9.</Description>
</NDC>
<NDC>
<NDCCode>43353-021-53</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43353-021-53) </PackageDescription>
<NDC11Code>43353-0021-53</NDC11Code>
<ProductNDC>43353-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090935</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free.</Description>
</NDC>
<NDC>
<NDCCode>43353-021-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-021-60) </PackageDescription>
<NDC11Code>43353-0021-60</NDC11Code>
<ProductNDC>43353-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090935</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free.</Description>
</NDC>
<NDC>
<NDCCode>43353-023-53</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43353-023-53) </PackageDescription>
<NDC11Code>43353-0023-53</NDC11Code>
<ProductNDC>43353-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090935</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free.</Description>
</NDC>
<NDC>
<NDCCode>43353-023-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43353-023-60) </PackageDescription>
<NDC11Code>43353-0023-60</NDC11Code>
<ProductNDC>43353-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090935</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C 19H 15NaO 4, and its structural formula is represented by the following:. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, Hydroxypropyl Cellulose, starlac and magnesium stearate. Additionally each. 1 mg tablet contains: D&C Red # 30 aluminum lake. 2 mg tablet contains: FD&C Red # 40 aluminum lake and FD&C Blue#2. 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue # 2. 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue # 2 and FD&C Red # 40 aluminum lake. 4 mg tablet contains: FD&C Blue # 2. 5 mg tablet contains: FD&C Yellow # 6 aluminum lake. 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue # 2. 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. 10 mg tablet is dye free.</Description>
</NDC>
</NDCList>