{
"NDC": [
{
"NDCCode": "43386-237-60",
"PackageDescription": "1 CARTON in 1 BLISTER PACK (43386-237-60) / 4 SPRAY, METERED in 1 CARTON (43386-237-70) ",
"NDC11Code": "43386-0237-60",
"ProductNDC": "43386-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyanocobalamin",
"NonProprietaryName": "Cyanocobalamin",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20240129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210629",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CYANOCOBALAMIN",
"StrengthNumber": "500",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Vitamin B 12 [CS], Vitamin B12 [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240129",
"SamplePackage": "N",
"IndicationAndUsage": "Cyanocobalamin Nasal Spray is indicated for: 1 Vitamin B12 maintenance therapy in adult patients with pernicious anemia who are in remission following intramuscular vitamin B12 therapy and who have no nervous system involvement, 2 Treatment of adult patients with dietary, drug-induced, or malabsorption-related vitamin B12 deficiency not due to pernicious anemia, 3 Prevention of vitamin B12 deficiency in adult patients with vitamin B12 requirements in excess of normal.",
"Description": "Cyanocobalamin is a synthetic form of vitamin B12. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.35%. The molecular formula is C63H88CoN14O14P, which corresponds to a molecular weight of 1355.38 and the following structural formula. Figure 1. Cyanocobalamin Chemical Structure. Cyanocobalamin occurs as red to purplish red crystalline powder or small crystals. It is very hygroscopic in the anhydrous form, and sparingly to moderately soluble in water (1:80). Its pharmacologic activity is destroyed by heavy metals (iron) and strong oxidizing or reducing agents (vitamin C), but not by autoclaving for short periods of time (15-20 minutes) at 121°C. The vitamin B12 coenzymes are very unstable in light. Cyanocobalamin Nasal Spray is a solution of cyanocobalamin, USP (vitamin B12) for administration as a spray to the nasal mucosa. Each single-use device of Cyanocobalamin Nasal Spray contains 0.125 mL of a 500 mcg/0.1 mL solution of cyanocobalamin with, benzalkonium chloride in purified water, citric acid, glycerin and sodium citrate. The spray solution has a pH between 4.5 and 5.5. Each spray delivers an average of 500 mcg of cyanocobalamin per actuation."
},
{
"NDCCode": "43386-026-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-026-06) > 60 mL in 1 BOTTLE",
"NDC11Code": "43386-0026-06",
"ProductNDC": "43386-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206003",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2018-12-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "43386-028-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-028-60) / 50 mL in 1 BOTTLE",
"NDC11Code": "43386-0028-60",
"ProductNDC": "43386-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206075",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151123",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.",
"Description": "Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide."
},
{
"NDCCode": "43386-038-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-038-60) / 75 mL in 1 BOTTLE",
"NDC11Code": "43386-0038-60",
"ProductNDC": "43386-038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20160601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206799",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160601",
"SamplePackage": "Y",
"IndicationAndUsage": "Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani , in patients intolerant of, or refractory to, other therapy (1.4).",
"Description": "Voriconazole, an azole antifungal agent is available as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole for oral suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 49 g powder for oral suspension are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include colloidal silicon dioxide, titanium dioxide, xanthan gum, sodium citrate dihydrate, sodium benzoate, anhydrous citric acid, natural and artificial orange flavor, and sucrose."
},
{
"NDCCode": "43386-069-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-069-60) > 60 mL in 1 BOTTLE",
"NDC11Code": "43386-0069-60",
"ProductNDC": "43386-069",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinolone Acetonide",
"NonProprietaryName": "Fluocinolone Acetonide",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150902",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206422",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINOLONE ACETONIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2019-02-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150902",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinolone Acetonide Topical Solution USP, 0.01% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water washable base of citric acid and propylene glycol."
},
{
"NDCCode": "43386-095-60",
"PackageDescription": "1 TUBE in 1 CARTON (43386-095-60) > 15 g in 1 TUBE",
"NDC11Code": "43386-0095-60",
"ProductNDC": "43386-095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207538",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170731",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Ointment USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinonide Ointment USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy) -6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Ointment USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated ointment base consisting of mono and di glycerides, propylene carbonate, propylene glycol, white petrolatum and white wax. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "43386-095-61",
"PackageDescription": "1 TUBE in 1 CARTON (43386-095-61) > 60 g in 1 TUBE",
"NDC11Code": "43386-0095-61",
"ProductNDC": "43386-095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207538",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170731",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Ointment USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinonide Ointment USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy) -6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Ointment USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated ointment base consisting of mono and di glycerides, propylene carbonate, propylene glycol, white petrolatum and white wax. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "43386-096-60",
"PackageDescription": "1 TUBE in 1 CARTON (43386-096-60) > 15 g in 1 TUBE",
"NDC11Code": "43386-0096-60",
"ProductNDC": "43386-096",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208841",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2018-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180602",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol propionate ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß, 16ß)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1, 4-diene-3, 20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white or almost white crystalline powder insoluble in water. Clobetasol propionate ointment USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "43386-096-62",
"PackageDescription": "1 TUBE in 1 CARTON (43386-096-62) > 60 g in 1 TUBE",
"NDC11Code": "43386-0096-62",
"ProductNDC": "43386-096",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180602",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208841",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2018-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180602",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate ointment USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol propionate ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß, 16ß)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1, 4-diene-3, 20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white or almost white crystalline powder insoluble in water. Clobetasol propionate ointment USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "43386-160-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (43386-160-06) ",
"NDC11Code": "43386-0160-06",
"ProductNDC": "43386-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091667",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2020-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120725",
"SamplePackage": "N",
"IndicationAndUsage": "Misoprostol is indicated for reducing the risk of NSAID (nonsteroidal anti-inflammatory drugs, including aspirin)–induced gastric ulcers in patients at high risk of complications from gastric ulcer, e.g., the elderly and patients with concomitant debilitating disease, as well as patients at high risk of developing gastric ulceration, such as patients with a history of ulcer. Misoprostol Tablet has not been shown to reduce the risk of duodenal ulcers in patients taking NSAIDs. Misoprostol Tablets should be taken for the duration of NSAID therapy. Misoprostol Tablets has been shown to reduce the risk of gastric ulcers in controlled studies of 3 months' duration. It had no effect, compared to placebo, on gastrointestinal pain or discomfort associated with NSAID use.",
"Description": "Misoprostol oral tablets contain either 100 mcg or 200 mcg of misoprostol, a synthetic prostaglandin E1 analog. Misoprostol contains approximately equal amounts of the two diastereomers presented below with their enantiomers indicated by (±). Misoprostol is a water-soluble, viscous liquid. Inactive ingredients of tablets are hydrogenated castor oil, microcrystalline cellulose, and crospovidone."
},
{
"NDCCode": "43386-161-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (43386-161-06) ",
"NDC11Code": "43386-0161-06",
"ProductNDC": "43386-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091667",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2020-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120725",
"SamplePackage": "N",
"IndicationAndUsage": "Misoprostol is indicated for reducing the risk of NSAID (nonsteroidal anti-inflammatory drugs, including aspirin)–induced gastric ulcers in patients at high risk of complications from gastric ulcer, e.g., the elderly and patients with concomitant debilitating disease, as well as patients at high risk of developing gastric ulceration, such as patients with a history of ulcer. Misoprostol Tablet has not been shown to reduce the risk of duodenal ulcers in patients taking NSAIDs. Misoprostol Tablets should be taken for the duration of NSAID therapy. Misoprostol Tablets has been shown to reduce the risk of gastric ulcers in controlled studies of 3 months' duration. It had no effect, compared to placebo, on gastrointestinal pain or discomfort associated with NSAID use.",
"Description": "Misoprostol oral tablets contain either 100 mcg or 200 mcg of misoprostol, a synthetic prostaglandin E1 analog. Misoprostol contains approximately equal amounts of the two diastereomers presented below with their enantiomers indicated by (±). Misoprostol is a water-soluble, viscous liquid. Inactive ingredients of tablets are hydrogenated castor oil, microcrystalline cellulose, and crospovidone."
},
{
"NDCCode": "43386-360-21",
"PackageDescription": "60 TABLET in 1 BOTTLE (43386-360-21)",
"NDC11Code": "43386-0360-21",
"ProductNDC": "43386-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenelzine Sulfate",
"NonProprietaryName": "Phenelzine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200181",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "PHENELZINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2017-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110214",
"SamplePackage": "N",
"IndicationAndUsage": "Phenelzine Sulfate Tablets, USP has been found to be effective in depressed patients clinically characterized as \"atypical,\" \"nonendogenous,\" or \"neurotic.\" These patients often have mixed anxiety and depression and phobic or hypochondriacal features. There is less conclusive evidence of its usefulness with severely depressed patients with endogenous features. Phenelzine Sulfate Tablets should rarely be the first antidepressant drug used. Rather, it is more suitable for use with patients who have failed to respond to the drugs more commonly used for these conditions.",
"Description": "Phenelzine Sulfate Tablets, USP (phenelzine sulfate) is a potent inhibitor of monoamine oxidase (MAO). Phenelzine sulfate is a hydrazine derivative. It has a molecular weight of 234.27 and is chemically described as C8H12N2 H2SO4. Its chemical structure is shown below. Each Phenelzine Sulfate Tablets film-coated for oral administration contains phenelzine sulfate equivalent to 15 mg of phenelzine base and the following inactive ingredients: mannitol, USP; colloidal silicon dioxide, NF; povidone, USP; edetate disodium, USP; magnesium stearate, NF; purified water, USP; polyvinyl alcohol part hydrolyzed USP, polyethylene glycol-3350 NF, FD&C yellow # 6, talc USP and titanium dioxide USP."
},
{
"NDCCode": "43386-470-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-470-60) > 15 mL in 1 BOTTLE",
"NDC11Code": "43386-0470-60",
"ProductNDC": "43386-470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065488",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "AZITHROMYCIN MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170927",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for mild to moderate infections caused by designated, susceptible bacteria: : 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (1.1, 1.2).",
"Description": "Azithromycin for oral suspension, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, USP, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.00. Azithromycin for oral suspension, USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 300 mg and 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose, tribasic sodium phosphate anhydrous, hydroxypropyl cellulose, xanthan gum, colloidal silicon dioxide, FD&C Red #40, and spray dried artificial cherry, vanilla and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin."
},
{
"NDCCode": "43386-510-87",
"PackageDescription": "7 BOTTLE, UNIT-DOSE in 1 CARTON (43386-510-87) > 60 mL in 1 BOTTLE, UNIT-DOSE (43386-510-81)",
"NDC11Code": "43386-0510-87",
"ProductNDC": "43386-510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "ENEMA",
"RouteName": "RECTAL",
"StartMarketingDate": "20091216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA019618",
"LabelerName": "GAVIS Pharmaceuticals, LLC",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/60mL",
"Pharm_Classes": "Aminosalicylate [EPC],Aminosalicylic Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-02-13",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "43386-530-06",
"PackageDescription": "60 g in 1 BOTTLE, PLASTIC (43386-530-06) ",
"NDC11Code": "43386-0530-06",
"ProductNDC": "43386-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin",
"NonProprietaryName": "Nystatin",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065138",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "NYSTATIN",
"StrengthNumber": "100000",
"StrengthUnit": "U/g",
"Pharm_Classes": "Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140926",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.",
"Description": "Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram dispersed in talc."
},
{
"NDCCode": "43386-551-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (43386-551-06) ",
"NDC11Code": "43386-0551-06",
"ProductNDC": "43386-551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tinidazole",
"NonProprietaryName": "Tinidazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202044",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "TINIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120430",
"SamplePackage": "N",
"IndicationAndUsage": "Tinidazole Tablets is a nitroimidazole antimicrobial indicated for: 1 Trichomoniasis (1.1), 2 Giardiasis: in patients age 3 and older (1.2), 3 Amebiasis: in patients age 3 and older (1.3), 4 Bacterial Vaginosis: in adult women (1.4, 8.1).",
"Description": "Tinidazole is a synthetic antiprotozoal and antibacterial agent. It is 1-[2-(ethylsulfonyl)ethyl]-2-methyl-5-nitroimidazole, a second-generation 2-methyl-5-nitroimidazole, which has the following chemical structure. Tinidazole pink oral tablets contain 250 mg or 500 mg of tinidazole. Inactive ingredients include pregelatinized starch NF, croscarmellose sodium NF, magnesium stearate NF, microcrystalline cellulose NF, polyvinyl alcohol-part hydrolyzed USP, titanium dioxide USP, polyethylene glycol 3000 NF, talc USP, and FD&C red # 40 aluminum lake."
},
{
"NDCCode": "43386-920-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-920-60) / 30 mL in 1 BOTTLE",
"NDC11Code": "43386-0920-60",
"ProductNDC": "43386-920",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride",
"NonProprietaryName": "Oxycodone Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204603",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150429",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone Hydrochloride Oral Solution is an opioid agonist indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. (1)Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for the relief of pain in opioid-tolerant adults. Limitations of Use (1)Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration (5.2), reserve Oxycodone Hydrochloride Oral Solution for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone Hydrochloride is a white odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. Chemically, oxycodone hydrochloride (5R,9R,13S,14S)-4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4.HCl, and it has the following chemical. Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/ mL): Each 1 mL of oral yellow solution contains 20 mg of oxycodone hydrochloride, USP and the following inactive ingredients: citric acid anhydrous, D&C Yellow #10, natural/artificial mixed berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbital solution."
},
{
"NDCCode": "43063-237-92",
"PackageDescription": "1 KIT in 1 CARTON (43063-237-92) * 60 mL in 1 BOTTLE, PLASTIC * 30 TABLET in 1 BOTTLE, PLASTIC (55289-784-30)",
"NDC11Code": "43063-0237-92",
"ProductNDC": "43063-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Comfort Pac With Tizanidine",
"NonProprietaryName": "Tizanidine",
"DosageFormName": "KIT",
"StartMarketingDate": "20130709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076280",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-11-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "47335-237-64",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (47335-237-64) / 10 TABLET, FILM COATED in 1 BLISTER PACK (47335-237-60) ",
"NDC11Code": "47335-0237-64",
"ProductNDC": "47335-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210784",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190429",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: To improve exercise ability and delay clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II–III symptoms and etiologies of idiopathic or heritable PAH (60%) or PAH associated with connective tissue diseases (34%).",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Figure 1 Ambrisentan Structural Formula Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each round, pale pink ambrisentan tablet contains 5 mg of ambrisentan. Each oval, deep pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored."
},
{
"NDCCode": "47335-237-66",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (47335-237-66) / 10 TABLET, FILM COATED in 1 BLISTER PACK (47335-237-60) ",
"NDC11Code": "47335-0237-66",
"ProductNDC": "47335-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210784",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190429",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: To improve exercise ability and delay clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II–III symptoms and etiologies of idiopathic or heritable PAH (60%) or PAH associated with connective tissue diseases (34%).",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Figure 1 Ambrisentan Structural Formula Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each round, pale pink ambrisentan tablet contains 5 mg of ambrisentan. Each oval, deep pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored."
},
{
"NDCCode": "49999-237-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (49999-237-60) ",
"NDC11Code": "49999-0237-60",
"ProductNDC": "49999-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075805",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20030326",
"SamplePackage": "N"
},
{
"NDCCode": "51655-237-25",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51655-237-25) ",
"NDC11Code": "51655-0237-25",
"ProductNDC": "51655-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210423",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine hydrochloride, USP respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "52686-237-60",
"PackageDescription": "1 TUBE in 1 CARTON (52686-237-60) > 33.45 g in 1 TUBE",
"NDC11Code": "52686-0237-60",
"ProductNDC": "52686-237",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Perfect Refining Foundation",
"ProprietaryNameSuffix": "B00",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICA INC.",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": ".63555; 1.37145",
"StrengthUnit": "g/33.45g; g/33.45g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110201",
"SamplePackage": "N"
},
{
"NDCCode": "53217-237-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (53217-237-60)",
"NDC11Code": "53217-0237-60",
"ProductNDC": "53217-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074056",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "55505-237-86",
"PackageDescription": "3 CAN in 1 PACKAGE (55505-237-86) / 60 g in 1 CAN",
"NDC11Code": "55505-0237-86",
"ProductNDC": "55505-237",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nizoral Hair Regrowth Treatment For Men",
"NonProprietaryName": "Minoxidil",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218616",
"LabelerName": "Kramer Laboratories",
"SubstanceName": "MINOXIDIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260801",
"SamplePackage": "N",
"IndicationAndUsage": "to regrow hair on the top of the scalp (vertex only, see pictures on side of this carton)."
},
{
"NDCCode": "57237-237-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (57237-237-60)",
"NDC11Code": "57237-0237-60",
"ProductNDC": "57237-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Stavudine",
"NonProprietaryName": "Stavudine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20081229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077672",
"LabelerName": "Citron Pharma LLC",
"SubstanceName": "STAVUDINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "59088-062-00",
"PackageDescription": "1 KIT in 1 PACKAGE (59088-062-00) * 1 BOTTLE, PLASTIC in 1 KIT > 60 TABLET in 1 BOTTLE, PLASTIC (53746-253-60) * 1 BOTTLE, PUMP in 1 KIT > 237 mL in 1 BOTTLE, PUMP (59088-310-16) * 1 BOTTLE, PLASTIC in 1 KIT > 60 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (16571-201-06)",
"NDC11Code": "59088-0062-00",
"ProductNDC": "59088-062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dermacinrx Inflammatral Pak",
"NonProprietaryName": "Diclofenac Sodium Delayed Release Tablets, Ranitidine Tablets, Capsaicin Cream",
"DosageFormName": "KIT",
"StartMarketingDate": "20150612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077863",
"LabelerName": "PureTek Corporation",
"Status": "Deprecated",
"LastUpdate": "2019-03-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "59088-093-00",
"PackageDescription": "1 KIT in 1 PACKAGE (59088-093-00) * 237 mL in 1 BOTTLE, PUMP (59088-310-16) * 60 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (61442-103-60) ",
"NDC11Code": "59088-0093-00",
"ProductNDC": "59088-093",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Inflammacin",
"NonProprietaryName": "Diclofenac Sodium, Capsaicin",
"DosageFormName": "KIT",
"StartMarketingDate": "20160111",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "PureTek Corporation",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160111",
"SamplePackage": "N",
"Description": "Diclofenac, as the sodium salt, is a benzene-acetic acid derivative. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula:. Each enteric-coated tablet for oral administration contains 75 mg of diclofenac sodium. In addition, each tablet contains the following inactive ingredients; black iron oxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, pharmaceutical glaze, polyethylene glycol, povidone, sodium starch glycolate, talc, titanium dioxide, triethyl citrate."
},
{
"NDCCode": "63187-237-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (63187-237-60) ",
"NDC11Code": "63187-0237-60",
"ProductNDC": "63187-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141103",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril tablets USP are indicated for the treatment of hypertension to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including lisinopril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril tablets USP may be administered alone or with other antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5(2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide."
},
{
"NDCCode": "67046-237-60",
"PackageDescription": "60 TABLET in 1 BLISTER PACK (67046-237-60) ",
"NDC11Code": "67046-0237-60",
"ProductNDC": "67046-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074305",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170925",
"SamplePackage": "N",
"IndicationAndUsage": "Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. It has the following structural formula. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Glipizide tablets, USP for oral use are available in 5 and 10 mg strengths. Each tablet for oral administration contains 5 mg or 10 mg of glipizide. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, and starch (corn)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43386-237-60</NDCCode>
<PackageDescription>1 CARTON in 1 BLISTER PACK (43386-237-60) / 4 SPRAY, METERED in 1 CARTON (43386-237-70) </PackageDescription>
<NDC11Code>43386-0237-60</NDC11Code>
<ProductNDC>43386-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyanocobalamin</ProprietaryName>
<NonProprietaryName>Cyanocobalamin</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20240129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210629</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyanocobalamin Nasal Spray is indicated for: 1 Vitamin B12 maintenance therapy in adult patients with pernicious anemia who are in remission following intramuscular vitamin B12 therapy and who have no nervous system involvement, 2 Treatment of adult patients with dietary, drug-induced, or malabsorption-related vitamin B12 deficiency not due to pernicious anemia, 3 Prevention of vitamin B12 deficiency in adult patients with vitamin B12 requirements in excess of normal.</IndicationAndUsage>
<Description>Cyanocobalamin is a synthetic form of vitamin B12. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.35%. The molecular formula is C63H88CoN14O14P, which corresponds to a molecular weight of 1355.38 and the following structural formula. Figure 1. Cyanocobalamin Chemical Structure. Cyanocobalamin occurs as red to purplish red crystalline powder or small crystals. It is very hygroscopic in the anhydrous form, and sparingly to moderately soluble in water (1:80). Its pharmacologic activity is destroyed by heavy metals (iron) and strong oxidizing or reducing agents (vitamin C), but not by autoclaving for short periods of time (15-20 minutes) at 121°C. The vitamin B12 coenzymes are very unstable in light. Cyanocobalamin Nasal Spray is a solution of cyanocobalamin, USP (vitamin B12) for administration as a spray to the nasal mucosa. Each single-use device of Cyanocobalamin Nasal Spray contains 0.125 mL of a 500 mcg/0.1 mL solution of cyanocobalamin with, benzalkonium chloride in purified water, citric acid, glycerin and sodium citrate. The spray solution has a pH between 4.5 and 5.5. Each spray delivers an average of 500 mcg of cyanocobalamin per actuation.</Description>
</NDC>
<NDC>
<NDCCode>43386-026-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-026-06) > 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0026-06</NDC11Code>
<ProductNDC>43386-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206003</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-12-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>43386-028-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-028-60) / 50 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0028-60</NDC11Code>
<ProductNDC>43386-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206075</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.</IndicationAndUsage>
<Description>Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>43386-038-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-038-60) / 75 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0038-60</NDC11Code>
<ProductNDC>43386-038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206799</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160601</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani , in patients intolerant of, or refractory to, other therapy (1.4).</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole for oral suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 49 g powder for oral suspension are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include colloidal silicon dioxide, titanium dioxide, xanthan gum, sodium citrate dihydrate, sodium benzoate, anhydrous citric acid, natural and artificial orange flavor, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>43386-069-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-069-60) > 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0069-60</NDC11Code>
<ProductNDC>43386-069</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinolone Acetonide</ProprietaryName>
<NonProprietaryName>Fluocinolone Acetonide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150902</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206422</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-02-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinolone Acetonide Topical Solution USP, 0.01% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water washable base of citric acid and propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43386-095-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43386-095-60) > 15 g in 1 TUBE</PackageDescription>
<NDC11Code>43386-0095-60</NDC11Code>
<ProductNDC>43386-095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207538</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Ointment USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinonide Ointment USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy) -6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Ointment USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated ointment base consisting of mono and di glycerides, propylene carbonate, propylene glycol, white petrolatum and white wax. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>43386-095-61</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43386-095-61) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>43386-0095-61</NDC11Code>
<ProductNDC>43386-095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207538</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Ointment USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinonide Ointment USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy) -6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Ointment USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated ointment base consisting of mono and di glycerides, propylene carbonate, propylene glycol, white petrolatum and white wax. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>43386-096-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43386-096-60) > 15 g in 1 TUBE</PackageDescription>
<NDC11Code>43386-0096-60</NDC11Code>
<ProductNDC>43386-096</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208841</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol propionate ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß, 16ß)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1, 4-diene-3, 20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white or almost white crystalline powder insoluble in water. Clobetasol propionate ointment USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>43386-096-62</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43386-096-62) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>43386-0096-62</NDC11Code>
<ProductNDC>43386-096</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180602</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208841</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate ointment USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol propionate ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß, 16ß)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1, 4-diene-3, 20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white or almost white crystalline powder insoluble in water. Clobetasol propionate ointment USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>43386-160-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43386-160-06) </PackageDescription>
<NDC11Code>43386-0160-06</NDC11Code>
<ProductNDC>43386-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091667</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Misoprostol is indicated for reducing the risk of NSAID (nonsteroidal anti-inflammatory drugs, including aspirin)–induced gastric ulcers in patients at high risk of complications from gastric ulcer, e.g., the elderly and patients with concomitant debilitating disease, as well as patients at high risk of developing gastric ulceration, such as patients with a history of ulcer. Misoprostol Tablet has not been shown to reduce the risk of duodenal ulcers in patients taking NSAIDs. Misoprostol Tablets should be taken for the duration of NSAID therapy. Misoprostol Tablets has been shown to reduce the risk of gastric ulcers in controlled studies of 3 months' duration. It had no effect, compared to placebo, on gastrointestinal pain or discomfort associated with NSAID use.</IndicationAndUsage>
<Description>Misoprostol oral tablets contain either 100 mcg or 200 mcg of misoprostol, a synthetic prostaglandin E1 analog. Misoprostol contains approximately equal amounts of the two diastereomers presented below with their enantiomers indicated by (±). Misoprostol is a water-soluble, viscous liquid. Inactive ingredients of tablets are hydrogenated castor oil, microcrystalline cellulose, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>43386-161-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43386-161-06) </PackageDescription>
<NDC11Code>43386-0161-06</NDC11Code>
<ProductNDC>43386-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091667</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Misoprostol is indicated for reducing the risk of NSAID (nonsteroidal anti-inflammatory drugs, including aspirin)–induced gastric ulcers in patients at high risk of complications from gastric ulcer, e.g., the elderly and patients with concomitant debilitating disease, as well as patients at high risk of developing gastric ulceration, such as patients with a history of ulcer. Misoprostol Tablet has not been shown to reduce the risk of duodenal ulcers in patients taking NSAIDs. Misoprostol Tablets should be taken for the duration of NSAID therapy. Misoprostol Tablets has been shown to reduce the risk of gastric ulcers in controlled studies of 3 months' duration. It had no effect, compared to placebo, on gastrointestinal pain or discomfort associated with NSAID use.</IndicationAndUsage>
<Description>Misoprostol oral tablets contain either 100 mcg or 200 mcg of misoprostol, a synthetic prostaglandin E1 analog. Misoprostol contains approximately equal amounts of the two diastereomers presented below with their enantiomers indicated by (±). Misoprostol is a water-soluble, viscous liquid. Inactive ingredients of tablets are hydrogenated castor oil, microcrystalline cellulose, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>43386-360-21</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43386-360-21)</PackageDescription>
<NDC11Code>43386-0360-21</NDC11Code>
<ProductNDC>43386-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenelzine Sulfate</ProprietaryName>
<NonProprietaryName>Phenelzine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200181</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>PHENELZINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenelzine Sulfate Tablets, USP has been found to be effective in depressed patients clinically characterized as "atypical," "nonendogenous," or "neurotic." These patients often have mixed anxiety and depression and phobic or hypochondriacal features. There is less conclusive evidence of its usefulness with severely depressed patients with endogenous features. Phenelzine Sulfate Tablets should rarely be the first antidepressant drug used. Rather, it is more suitable for use with patients who have failed to respond to the drugs more commonly used for these conditions.</IndicationAndUsage>
<Description>Phenelzine Sulfate Tablets, USP (phenelzine sulfate) is a potent inhibitor of monoamine oxidase (MAO). Phenelzine sulfate is a hydrazine derivative. It has a molecular weight of 234.27 and is chemically described as C8H12N2 H2SO4. Its chemical structure is shown below. Each Phenelzine Sulfate Tablets film-coated for oral administration contains phenelzine sulfate equivalent to 15 mg of phenelzine base and the following inactive ingredients: mannitol, USP; colloidal silicon dioxide, NF; povidone, USP; edetate disodium, USP; magnesium stearate, NF; purified water, USP; polyvinyl alcohol part hydrolyzed USP, polyethylene glycol-3350 NF, FD&C yellow # 6, talc USP and titanium dioxide USP.</Description>
</NDC>
<NDC>
<NDCCode>43386-470-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-470-60) > 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0470-60</NDC11Code>
<ProductNDC>43386-470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065488</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for mild to moderate infections caused by designated, susceptible bacteria: : 1 Acute bacterial exacerbations of chronic bronchitis in adults (1.1), 2 Acute bacterial sinusitis in adults (1.1), 3 Uncomplicated skin and skin structure infections in adults (1.1), 4 Urethritis and cervicitis in adults (1.1), 5 Genital ulcer disease in men (1.1), 6 Acute otitis media in pediatric patients (1.2), 7 Community-acquired pneumonia in adults and pediatric patients (1.1, 1.2), 8 Pharyngitis/tonsillitis in adults and pediatric patients (1.1, 1.2).</IndicationAndUsage>
<Description>Azithromycin for oral suspension, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, USP, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.00. Azithromycin for oral suspension, USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 300 mg and 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose, tribasic sodium phosphate anhydrous, hydroxypropyl cellulose, xanthan gum, colloidal silicon dioxide, FD&C Red #40, and spray dried artificial cherry, vanilla and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>43386-510-87</NDCCode>
<PackageDescription>7 BOTTLE, UNIT-DOSE in 1 CARTON (43386-510-87) > 60 mL in 1 BOTTLE, UNIT-DOSE (43386-510-81)</PackageDescription>
<NDC11Code>43386-0510-87</NDC11Code>
<ProductNDC>43386-510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>ENEMA</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20091216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA019618</ApplicationNumber>
<LabelerName>GAVIS Pharmaceuticals, LLC</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/60mL</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC],Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-02-13</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43386-530-06</NDCCode>
<PackageDescription>60 g in 1 BOTTLE, PLASTIC (43386-530-06) </PackageDescription>
<NDC11Code>43386-0530-06</NDC11Code>
<ProductNDC>43386-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin</ProprietaryName>
<NonProprietaryName>Nystatin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065138</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>NYSTATIN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>U/g</StrengthUnit>
<Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
<Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram dispersed in talc.</Description>
</NDC>
<NDC>
<NDCCode>43386-551-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (43386-551-06) </PackageDescription>
<NDC11Code>43386-0551-06</NDC11Code>
<ProductNDC>43386-551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tinidazole</ProprietaryName>
<NonProprietaryName>Tinidazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202044</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>TINIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tinidazole Tablets is a nitroimidazole antimicrobial indicated for: 1 Trichomoniasis (1.1), 2 Giardiasis: in patients age 3 and older (1.2), 3 Amebiasis: in patients age 3 and older (1.3), 4 Bacterial Vaginosis: in adult women (1.4, 8.1).</IndicationAndUsage>
<Description>Tinidazole is a synthetic antiprotozoal and antibacterial agent. It is 1-[2-(ethylsulfonyl)ethyl]-2-methyl-5-nitroimidazole, a second-generation 2-methyl-5-nitroimidazole, which has the following chemical structure. Tinidazole pink oral tablets contain 250 mg or 500 mg of tinidazole. Inactive ingredients include pregelatinized starch NF, croscarmellose sodium NF, magnesium stearate NF, microcrystalline cellulose NF, polyvinyl alcohol-part hydrolyzed USP, titanium dioxide USP, polyethylene glycol 3000 NF, talc USP, and FD&C red # 40 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>43386-920-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-920-60) / 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0920-60</NDC11Code>
<ProductNDC>43386-920</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204603</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone Hydrochloride Oral Solution is an opioid agonist indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. (1)Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for the relief of pain in opioid-tolerant adults. Limitations of Use (1)Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration (5.2), reserve Oxycodone Hydrochloride Oral Solution for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride is a white odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. Chemically, oxycodone hydrochloride (5R,9R,13S,14S)-4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4.HCl, and it has the following chemical. Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/ mL): Each 1 mL of oral yellow solution contains 20 mg of oxycodone hydrochloride, USP and the following inactive ingredients: citric acid anhydrous, D&C Yellow #10, natural/artificial mixed berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbital solution.</Description>
</NDC>
<NDC>
<NDCCode>43063-237-92</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (43063-237-92) * 60 mL in 1 BOTTLE, PLASTIC * 30 TABLET in 1 BOTTLE, PLASTIC (55289-784-30)</PackageDescription>
<NDC11Code>43063-0237-92</NDC11Code>
<ProductNDC>43063-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Comfort Pac With Tizanidine</ProprietaryName>
<NonProprietaryName>Tizanidine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20130709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076280</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-11-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>47335-237-64</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (47335-237-64) / 10 TABLET, FILM COATED in 1 BLISTER PACK (47335-237-60) </PackageDescription>
<NDC11Code>47335-0237-64</NDC11Code>
<ProductNDC>47335-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210784</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: To improve exercise ability and delay clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II–III symptoms and etiologies of idiopathic or heritable PAH (60%) or PAH associated with connective tissue diseases (34%).</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Figure 1 Ambrisentan Structural Formula Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each round, pale pink ambrisentan tablet contains 5 mg of ambrisentan. Each oval, deep pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>47335-237-66</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (47335-237-66) / 10 TABLET, FILM COATED in 1 BLISTER PACK (47335-237-60) </PackageDescription>
<NDC11Code>47335-0237-66</NDC11Code>
<ProductNDC>47335-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210784</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: To improve exercise ability and delay clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II–III symptoms and etiologies of idiopathic or heritable PAH (60%) or PAH associated with connective tissue diseases (34%).</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula. Figure 1 Ambrisentan Structural Formula Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each round, pale pink ambrisentan tablet contains 5 mg of ambrisentan. Each oval, deep pink ambrisentan tablet contains 10 mg of ambrisentan. Ambrisentan tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>49999-237-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (49999-237-60) </PackageDescription>
<NDC11Code>49999-0237-60</NDC11Code>
<ProductNDC>49999-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075805</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51655-237-25</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51655-237-25) </PackageDescription>
<NDC11Code>51655-0237-25</NDC11Code>
<ProductNDC>51655-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-( S)- N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20 mg, 30 mg, 40 mg or 60 mg of duloxetine (equivalent to 22.4 mg, 33.7 mg, 44.9 mg or 67.3 mg of duloxetine hydrochloride, USP respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Red No. 3 (40 mg), FD&C Blue No. 1 (40 mg), FD&C Blue No. 2 (20 mg, 30 mg, 60 mg), titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg, 40 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>52686-237-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (52686-237-60) > 33.45 g in 1 TUBE</PackageDescription>
<NDC11Code>52686-0237-60</NDC11Code>
<ProductNDC>52686-237</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Perfect Refining Foundation</ProprietaryName>
<ProprietaryNameSuffix>B00</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICA INC.</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>.63555; 1.37145</StrengthNumber>
<StrengthUnit>g/33.45g; g/33.45g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53217-237-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (53217-237-60)</PackageDescription>
<NDC11Code>53217-0237-60</NDC11Code>
<ProductNDC>53217-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074056</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>55505-237-86</NDCCode>
<PackageDescription>3 CAN in 1 PACKAGE (55505-237-86) / 60 g in 1 CAN</PackageDescription>
<NDC11Code>55505-0237-86</NDC11Code>
<ProductNDC>55505-237</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nizoral Hair Regrowth Treatment For Men</ProprietaryName>
<NonProprietaryName>Minoxidil</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218616</ApplicationNumber>
<LabelerName>Kramer Laboratories</LabelerName>
<SubstanceName>MINOXIDIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to regrow hair on the top of the scalp (vertex only, see pictures on side of this carton).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57237-237-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (57237-237-60)</PackageDescription>
<NDC11Code>57237-0237-60</NDC11Code>
<ProductNDC>57237-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Stavudine</ProprietaryName>
<NonProprietaryName>Stavudine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077672</ApplicationNumber>
<LabelerName>Citron Pharma LLC</LabelerName>
<SubstanceName>STAVUDINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59088-062-00</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (59088-062-00) * 1 BOTTLE, PLASTIC in 1 KIT > 60 TABLET in 1 BOTTLE, PLASTIC (53746-253-60) * 1 BOTTLE, PUMP in 1 KIT > 237 mL in 1 BOTTLE, PUMP (59088-310-16) * 1 BOTTLE, PLASTIC in 1 KIT > 60 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (16571-201-06)</PackageDescription>
<NDC11Code>59088-0062-00</NDC11Code>
<ProductNDC>59088-062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dermacinrx Inflammatral Pak</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium Delayed Release Tablets, Ranitidine Tablets, Capsaicin Cream</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20150612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077863</ApplicationNumber>
<LabelerName>PureTek Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-03-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59088-093-00</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (59088-093-00) * 237 mL in 1 BOTTLE, PUMP (59088-310-16) * 60 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (61442-103-60) </PackageDescription>
<NDC11Code>59088-0093-00</NDC11Code>
<ProductNDC>59088-093</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Inflammacin</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium, Capsaicin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20160111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>PureTek Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Diclofenac, as the sodium salt, is a benzene-acetic acid derivative. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula:. Each enteric-coated tablet for oral administration contains 75 mg of diclofenac sodium. In addition, each tablet contains the following inactive ingredients; black iron oxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, pharmaceutical glaze, polyethylene glycol, povidone, sodium starch glycolate, talc, titanium dioxide, triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>63187-237-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (63187-237-60) </PackageDescription>
<NDC11Code>63187-0237-60</NDC11Code>
<ProductNDC>63187-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril tablets USP are indicated for the treatment of hypertension to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including lisinopril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Lisinopril tablets USP may be administered alone or with other antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5(2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>67046-237-60</NDCCode>
<PackageDescription>60 TABLET in 1 BLISTER PACK (67046-237-60) </PackageDescription>
<NDC11Code>67046-0237-60</NDC11Code>
<ProductNDC>67046-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074305</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido)ethyl]phenyl]sulfonyl]urea. It has the following structural formula. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Glipizide tablets, USP for oral use are available in 5 and 10 mg strengths. Each tablet for oral administration contains 5 mg or 10 mg of glipizide. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, and starch (corn).</Description>
</NDC>
</NDCList>