{
"NDC": [
{
"NDCCode": "43386-580-31",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (43386-580-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "43386-0580-31",
"ProductNDC": "43386-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide Hydrochloride",
"NonProprietaryName": "Metoclopramide Hydrochloride",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20150406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202191",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150406",
"SamplePackage": "N",
"IndicationAndUsage": "Metoclopramide Orally Disintegrating Tablets is indicated in adults for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux disease (GERD) who fail to respond to conventional therapy., 2 Relief of symptoms associated with acute and recurrent diabetic gastroparesis (gastric stasis).",
"Description": "Metoclopramide hydrochloride, the active ingredient of Metoclopramide Orally Disintegrating Tablets, is a dopamine-2 (D2) antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate), is a white or almost white crystalline powder, freely soluble in water. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. The molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is. Metoclopramide Orally Disintegrating Tablets is an orally disintegrating tablet for oral administration and is available in 5 mg and 10 mg strengths. : 1 Each Metoclopramide Orally Disintegrating Tablets 5 mg tablet contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride USP)., 2 Each Metoclopramide Orally Disintegrating Tablets 10 mg tablet contains 10 mg metoclopramide (equivalent to 11.82 mg metoclopramide hydrochloride USP)., 3 Metoclopramide Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate."
},
{
"NDCCode": "43386-580-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (43386-580-30) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "43386-0580-30",
"ProductNDC": "43386-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide Hydrochloride",
"NonProprietaryName": "Metoclopramide Hydrochloride",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20150406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202191",
"LabelerName": "GAVIS Pharmaceuticals, LLC",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "40032-580-31",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (40032-580-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "40032-0580-31",
"ProductNDC": "40032-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide Hydrochloride",
"NonProprietaryName": "Metoclopramide Hydrochloride",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20140815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202191",
"LabelerName": "Novel Laboratories, Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20140815",
"SamplePackage": "N",
"IndicationAndUsage": "Metoclopramide Orally Disintegrating Tablets are a dopamine receptor antagonist indicated for: 1 Relief of Symptomatic Gastroesophageal Reflux: short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy (1.1), 2 Diabetic Gastroparesis (Diabetic Gastric Stasis): the relief of symptoms in adults associated with acute and recurrent diabetic gastroparesis (gastric stasis) (1.2).",
"Description": "Metoclopramide Hydrochloride Orally Disintegrating Tablet is an orally disintegrating tablet formulation of metoclopramide hydrochloride. The 5 mg strength tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and \"581\" on the other side; it is comprised of 5 mg metoclopramide (as 5.91 mg of metoclopramide hydrochloride). The 10 mg tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and \"580\" on the other side; it is comprised of 10 mg metoclopramide (as 11.82 mg of metoclopramide hydrochloride). The active ingredient, metoclopramide hydrochloride, is a white crystalline, odorless substance, freely soluble in water. Chemically, it is 4 amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is shown in Figure 1. Figure 1. Metoclopramide Hydrochloride Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate."
},
{
"NDCCode": "43386-022-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (43386-022-31) / 10 TABLET in 1 BLISTER PACK (43386-022-30) ",
"NDC11Code": "43386-0022-31",
"ProductNDC": "43386-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160822",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207526",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160822",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.",
"Description": "Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with \"n 022\" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol."
},
{
"NDCCode": "43386-088-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (43386-088-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK (43386-088-30) ",
"NDC11Code": "43386-0088-31",
"ProductNDC": "43386-088",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207371",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160524",
"SamplePackage": "N",
"IndicationAndUsage": "Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4).",
"Description": "Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole. The inactive ingredients include lactose monohydrate, pregelatinized starch (maize starch), croscarmellose sodium, povidone, magnesium stearate and a coating containing hypromellose (HPMC 2910), titanium dioxide, lactose monohydrate and triacetin."
},
{
"NDCCode": "43386-089-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (43386-089-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK (43386-089-30) ",
"NDC11Code": "43386-0089-31",
"ProductNDC": "43386-089",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207371",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160524",
"SamplePackage": "N",
"IndicationAndUsage": "Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4).",
"Description": "Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole. The inactive ingredients include lactose monohydrate, pregelatinized starch (maize starch), croscarmellose sodium, povidone, magnesium stearate and a coating containing hypromellose (HPMC 2910), titanium dioxide, lactose monohydrate and triacetin."
},
{
"NDCCode": "43386-090-19",
"PackageDescription": "274.31 g in 1 BOTTLE (43386-090-19) ",
"NDC11Code": "43386-0090-19",
"ProductNDC": "43386-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte G",
"ProprietaryNameSuffix": "Tm",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090231",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "236; 22.74; 6.74; 5.86; 2.97",
"StrengthUnit": "g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090601",
"SamplePackage": "N",
"IndicationAndUsage": "GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults. (1).",
"Description": "Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "43386-090-91",
"PackageDescription": "274.31 g in 1 BOTTLE (43386-090-91)",
"NDC11Code": "43386-0090-91",
"ProductNDC": "43386-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte G",
"ProprietaryNameSuffix": "Tm",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090231",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "236; 22.74; 6.74; 5.86; 2.97",
"StrengthUnit": "g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g",
"Pharm_Classes": "Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).",
"Description": "For oral solution: Each 4 liter (4L) GaviLyte-G jug contains a white powder for reconstitution. GaviLyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 236 g, sodium sulfate (anhydrous) 22.74 g, sodium bicarbonate 6.74 g, sodium chloride 5.86 g, potassium chloride 2.97 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "43386-194-31",
"PackageDescription": "100 POUCH in 1 CARTON (43386-194-31) / 1.5 g in 1 POUCH (43386-194-90) ",
"NDC11Code": "43386-0194-31",
"ProductNDC": "43386-194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210241",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1.54g",
"Status": "Active",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181121",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium Chloride is a white crystalline powderIt is freely soluble in water and practically insoluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: Citric Acid Anhydrous, Silicon Dioxide, FD&C Yellow No.6, N-C Natural and Artificial Orange Flavor, and Sucralose."
},
{
"NDCCode": "43386-581-31",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (43386-581-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "43386-0581-31",
"ProductNDC": "43386-581",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide Hydrochloride",
"NonProprietaryName": "Metoclopramide Hydrochloride",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20150406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202191",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150406",
"SamplePackage": "N",
"IndicationAndUsage": "Metoclopramide Orally Disintegrating Tablets is indicated in adults for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux disease (GERD) who fail to respond to conventional therapy., 2 Relief of symptoms associated with acute and recurrent diabetic gastroparesis (gastric stasis).",
"Description": "Metoclopramide hydrochloride, the active ingredient of Metoclopramide Orally Disintegrating Tablets, is a dopamine-2 (D2) antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate), is a white or almost white crystalline powder, freely soluble in water. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. The molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is. Metoclopramide Orally Disintegrating Tablets is an orally disintegrating tablet for oral administration and is available in 5 mg and 10 mg strengths. : 1 Each Metoclopramide Orally Disintegrating Tablets 5 mg tablet contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride USP)., 2 Each Metoclopramide Orally Disintegrating Tablets 10 mg tablet contains 10 mg metoclopramide (equivalent to 11.82 mg metoclopramide hydrochloride USP)., 3 Metoclopramide Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate."
},
{
"NDCCode": "0143-9533-01",
"PackageDescription": "1 VIAL in 1 BOX, UNIT-DOSE (0143-9533-01) > 25 mL in 1 VIAL",
"NDC11Code": "00143-9533-01",
"ProductNDC": "0143-9533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol Sodium",
"NonProprietaryName": "Allopurinol Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076870",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040901",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol Sodium for Injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "Allopurinol Sodium for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 162.5 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol Sodium for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "40032-581-31",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (40032-581-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "40032-0581-31",
"ProductNDC": "40032-581",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide Hydrochloride",
"NonProprietaryName": "Metoclopramide Hydrochloride",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20140815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202191",
"LabelerName": "Novel Laboratories, Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20140815",
"SamplePackage": "N",
"IndicationAndUsage": "Metoclopramide Orally Disintegrating Tablets are a dopamine receptor antagonist indicated for: 1 Relief of Symptomatic Gastroesophageal Reflux: short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy (1.1), 2 Diabetic Gastroparesis (Diabetic Gastric Stasis): the relief of symptoms in adults associated with acute and recurrent diabetic gastroparesis (gastric stasis) (1.2).",
"Description": "Metoclopramide Hydrochloride Orally Disintegrating Tablet is an orally disintegrating tablet formulation of metoclopramide hydrochloride. The 5 mg strength tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and \"581\" on the other side; it is comprised of 5 mg metoclopramide (as 5.91 mg of metoclopramide hydrochloride). The 10 mg tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and \"580\" on the other side; it is comprised of 10 mg metoclopramide (as 11.82 mg of metoclopramide hydrochloride). The active ingredient, metoclopramide hydrochloride, is a white crystalline, odorless substance, freely soluble in water. Chemically, it is 4 amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is shown in Figure 1. Figure 1. Metoclopramide Hydrochloride Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate."
},
{
"NDCCode": "59310-580-20",
"PackageDescription": "1 INHALER in 1 BOX (59310-580-20) / 200 POWDER, METERED in 1 INHALER",
"NDC11Code": "59310-0580-20",
"ProductNDC": "59310-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Proair Respiclick",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150423",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205636",
"LabelerName": "Teva Respiratory, LLC",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "90",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150511",
"SamplePackage": "N",
"IndicationAndUsage": "PROAIR RESPICLICK is a beta2-adrenergic agonist indicated for: 1 Treatment or prevention of bronchospasm in patients 4 years of age and older with reversible obstructive airway disease. (1.1), 2 Prevention of exercise-induced bronchospasm in patients 4 years of age and older. (1.2).",
"Description": "The active ingredient of PROAIR RESPICLICK inhalation powder is albuterol sulfate, a racemic salt of albuterol. Albuterol sulfate is a beta2-adrenergic agonist. It has the chemical name α1-[(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt), and the following chemical structure. The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C13H21NO3)2H2SO4. Albuterol sulfate is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate is the official U.S. Adopted Name in the United States, and salbutamol sulfate is the recommended World Health Organization international nonproprietary name. PROAIR RESPICLICK is an inhalation-driven, multi-dose inhalation powder (dry powder inhaler) for oral inhalation only. It contains a formulation blend of albuterol sulfate with alpha-lactose monohydrate. Each actuation provides a metered dose of 2.6 mg of the formulation containing 117 mcg of albuterol sulfate (equivalent to 97 mcg of albuterol base) and lactose from the device reservoir. Under standardized in vitro test conditions with fixed flow rates ranging from 58 to 71 L/min, and with a total air volume of 2 L, the PROAIR RESPICLICK inhaler delivers 108 mcg of albuterol sulfate (equivalent to 90 mcg of albuterol base) with lactose from the mouthpiece. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. In a study that investigated the peak inspiratory flow rate (PIFR) in asthma (n=27, ages 12 to 17 years old and n=50, ages 18 to 45 years old) and COPD (n=50, over 50 years old) patients, the mean PIFR achieved by subjects was >60 L/min (range = 31 to 110 L/min.), indicating that patients would be able to achieve the required inspiratory flow to operate the MDPI device correctly. The inhaler is provided for 200 actuations (inhalations)."
},
{
"NDCCode": "59310-580-21",
"PackageDescription": "1 INHALER in 1 BOX (59310-580-21) > 200 POWDER, METERED in 1 INHALER",
"NDC11Code": "59310-0580-21",
"ProductNDC": "59310-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Proair Respiclick",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150423",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205636",
"LabelerName": "Teva Respiratory, LLC",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "90",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150423",
"SamplePackage": "N",
"IndicationAndUsage": "PROAIR RESPICLICK is a beta2-adrenergic agonist indicated for: 1 Treatment or prevention of bronchospasm in patients 4 years of age and older with reversible obstructive airway disease. (1.1), 2 Prevention of exercise-induced bronchospasm in patients 4 years of age and older. (1.2).",
"Description": "The active ingredient of PROAIR RESPICLICK inhalation powder is albuterol sulfate, a racemic salt of albuterol. Albuterol sulfate is a beta2-adrenergic agonist. It has the chemical name α1-[(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt), and the following chemical structure. The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C13H21NO3)2H2SO4. Albuterol sulfate is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate is the official U.S. Adopted Name in the United States, and salbutamol sulfate is the recommended World Health Organization international nonproprietary name. PROAIR RESPICLICK is an inhalation-driven, multi-dose inhalation powder (dry powder inhaler) for oral inhalation only. It contains a formulation blend of albuterol sulfate with alpha-lactose monohydrate. Each actuation provides a metered dose of 2.6 mg of the formulation containing 117 mcg of albuterol sulfate (equivalent to 97 mcg of albuterol base) and lactose from the device reservoir. Under standardized in vitro test conditions with fixed flow rates ranging from 58 to 71 L/min, and with a total air volume of 2 L, the PROAIR RESPICLICK inhaler delivers 108 mcg of albuterol sulfate (equivalent to 90 mcg of albuterol base) with lactose from the mouthpiece. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. In a study that investigated the peak inspiratory flow rate (PIFR) in asthma (n=27, ages 12 to 17 years old and n=50, ages 18 to 45 years old) and COPD (n=50, over 50 years old) patients, the mean PIFR achieved by subjects was >60 L/min (range = 31 to 110 L/min.), indicating that patients would be able to achieve the required inspiratory flow to operate the MDPI device correctly. The inhaler is provided for 200 actuations (inhalations)."
},
{
"NDCCode": "65219-380-30",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (65219-380-30) / 25 mL in 1 VIAL, GLASS",
"NDC11Code": "65219-0380-30",
"ProductNDC": "65219-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212363",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220314",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is:. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "67457-187-50",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (67457-187-50) > 25 mL in 1 VIAL, GLASS",
"NDC11Code": "67457-0187-50",
"ProductNDC": "67457-187",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aloprim",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020298",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070515",
"SamplePackage": "N",
"IndicationAndUsage": "ALOPRIM is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "ALOPRIM (allopurinol) for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 148 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. ALOPRIM (allopurinol) for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "67457-978-50",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (67457-978-50) / 25 mL in 1 VIAL, GLASS",
"NDC11Code": "67457-0978-50",
"ProductNDC": "67457-978",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aloprim",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201118",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020298",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20201118",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "ALOPRIM is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "ALOPRIM (allopurinol) for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 148 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. ALOPRIM (allopurinol) for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "68083-380-01",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68083-380-01) > 25 mL in 1 VIAL, GLASS",
"NDC11Code": "68083-0380-01",
"ProductNDC": "68083-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212363",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220126",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "72572-580-25",
"PackageDescription": "25 VIAL in 1 CARTON (72572-580-25) / 2 mL in 1 VIAL (72572-580-01) ",
"NDC11Code": "72572-0580-25",
"ProductNDC": "72572-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prochlorperazine Edisylate",
"NonProprietaryName": "Prochlorperazine Edisylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20191118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089903",
"LabelerName": "Civica, Inc.",
"SubstanceName": "PROCHLORPERAZINE EDISYLATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191118",
"SamplePackage": "N",
"IndicationAndUsage": "To control severe nausea and vomiting. For the treatment of schizophrenia. Prochlorperazine has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Prochlorperazine edisylate, 2-Chloro-10-[3-(4-methyl-1-piperazinyl)propyl] phenothiazine 1,2-ethanedisulfonate (1:1), has the following structural formula. Prochlorperazine Edisylate Injection, an antiemetic and antipsychotic, is a sterile solution intended for intramuscular or intravenous administration. Each mL contains prochlorperazine 5 mg as the edisylate, monobasic sodium phosphate monohydrate 5 mg, sodium tartrate dihydrate 12 mg, saccharin sodium 0.9 mg and benzyl alcohol 7.5 mg in Water for Injection. pH 4.2-6.2."
},
{
"NDCCode": "43386-016-61",
"PackageDescription": "150 mL in 1 BOTTLE (43386-016-61) ",
"NDC11Code": "43386-0016-61",
"ProductNDC": "43386-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205878",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "16.05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20151209",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium topical solution is a nonsteroidal anti-inflammatory drug indicated for the treatment of signs and symptoms of osteoarthritis of the knee(s). (1).",
"Description": "Diclofenac sodium topical solution contains 1.5% w/w diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug (NSAID), designated chemically as 2-[(2,6 dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. It is a white to off-white, hygroscopic crystalline powder that is freely soluble in methanol, soluble in alcohol, slightly soluble in acetone and sparingly soluble in water. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2 and it has the following structural formula. Each 1 mL of solution contains 16.05 mg of diclofenac sodium. The inactive ingredients in diclofenac sodium topical solution include: dimethyl sulfoxide USP (DMSO, 45.5% w/w), propylene glycol, alcohol, glycerin and purified water."
},
{
"NDCCode": "43386-022-02",
"PackageDescription": "20 TABLET in 1 BOTTLE (43386-022-02) ",
"NDC11Code": "43386-0022-02",
"ProductNDC": "43386-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160822",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207526",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160822",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.",
"Description": "Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with \"n 022\" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol."
},
{
"NDCCode": "43386-022-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43386-022-05) ",
"NDC11Code": "43386-0022-05",
"ProductNDC": "43386-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160822",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207526",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160822",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.",
"Description": "Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with \"n 022\" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol."
},
{
"NDCCode": "43386-026-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-026-02) > 20 mL in 1 BOTTLE",
"NDC11Code": "43386-0026-02",
"ProductNDC": "43386-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206003",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2018-12-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "43386-026-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-026-06) > 60 mL in 1 BOTTLE",
"NDC11Code": "43386-0026-06",
"ProductNDC": "43386-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206003",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2018-12-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170721",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "43386-028-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-028-60) / 50 mL in 1 BOTTLE",
"NDC11Code": "43386-0028-60",
"ProductNDC": "43386-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206075",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151123",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.",
"Description": "Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide."
},
{
"NDCCode": "43386-028-61",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-028-61) > 25 mL in 1 BOTTLE",
"NDC11Code": "43386-0028-61",
"ProductNDC": "43386-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206075",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-02-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.",
"Description": "Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide."
},
{
"NDCCode": "43386-030-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (43386-030-01) ",
"NDC11Code": "43386-0030-01",
"ProductNDC": "43386-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monobasic Sodium Phosphate And Dibasic Sodium Phosphate",
"NonProprietaryName": "Monobasic Sodium Phosphate And Dibasic Sodium Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079247",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": ".398; 1.105",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20120120",
"SamplePackage": "N",
"IndicationAndUsage": "Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are indicated for cleansing of the colon as a preparation for colonoscopy in adults.",
"Description": "Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets (sodium phosphate monobasic monohydrate and sodium phosphate dibasic anhydrous) is an osmotic laxative used to clean the colon prior to colonoscopy. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is manufactured with a highly soluble tablet binder and does not contain microcrystalline cellulose (MCC). Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are white to off-white uncoated tablet, modified oval shaped, biconvex, bisect on one side and plain on the other. Debossed \"N\" on the left side of the bisect and \"03\" on the right side of the bisect. Each Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablet contains 1.102 grams of Monobasic Sodium Phosphate, USP and 0.398 grams of Dibasic Sodium Phosphate, USP for a total of 1.5 grams of sodium phosphate per tablet. Inert ingredients include polyethylene glycol 8000, NF; and magnesium stearate, NF. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is gluten-free. The structural and molecular formulae and molecular weights of the active ingredients are shown below: 1 Monobasic sodium phosphate, USP."
},
{
"NDCCode": "43386-038-60",
"PackageDescription": "1 BOTTLE in 1 CARTON (43386-038-60) / 75 mL in 1 BOTTLE",
"NDC11Code": "43386-0038-60",
"ProductNDC": "43386-038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20160601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206799",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160601",
"SamplePackage": "Y",
"IndicationAndUsage": "Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani , in patients intolerant of, or refractory to, other therapy (1.4).",
"Description": "Voriconazole, an azole antifungal agent is available as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole for oral suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 49 g powder for oral suspension are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include colloidal silicon dioxide, titanium dioxide, xanthan gum, sodium citrate dihydrate, sodium benzoate, anhydrous citric acid, natural and artificial orange flavor, and sucrose."
},
{
"NDCCode": "43386-050-19",
"PackageDescription": "438.4 g in 1 BOTTLE (43386-050-19) ",
"NDC11Code": "43386-0050-19",
"ProductNDC": "43386-050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte-n",
"NonProprietaryName": "Polyethylene Glycol-3350, Sodium Chloride, Potassium Chloride And Sodium Bicarbonate",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090019",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM CHLORIDE; SODIUM BICARBONATE; POTASSIUM CHLORIDE",
"StrengthNumber": "420; 11.2; 5.72; 1.48",
"StrengthUnit": "g/438.4g; g/438.4g; g/438.4g; g/438.4g",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090528",
"SamplePackage": "Y",
"IndicationAndUsage": "GaviLyte-N is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy in adults and pediatric patients aged 6 months or greater (1).",
"Description": "For oral solution: Each 4 liter (4L) GaviLyte-N jug contains a white powder for reconstitution. GaviLyte-N is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 420g, sodium bicarbonate 5.72 g, sodium chloride 11.2 g, potassium chloride 1.4 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "43386-060-19",
"PackageDescription": "278.26 g in 1 BOTTLE (43386-060-19) ",
"NDC11Code": "43386-0060-19",
"ProductNDC": "43386-060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte - C",
"ProprietaryNameSuffix": "Tm",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes With Flavor Pack",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090186",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM BICARBONATE; SODIUM SULFATE ANHYDROUS",
"StrengthNumber": "240; 5.84; 2.98; 6.72; 22.72",
"StrengthUnit": "g/278.26g; g/278.26g; g/278.26g; g/278.26g; g/278.26g",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090601",
"SamplePackage": "Y",
"IndicationAndUsage": "GaviLyte- C with flavor pack is indicated for bowel cleansing prior to colonoscopy or barium enema X-ray examination.",
"Description": "GaviLyte- C with flavor pack is a white, colon lavage preparation provided as water-soluble components for solution. In solution this preparation with lemon flavor pack added delivers the following, in grams per liter. Polyethylene glycol 3350 240.00. Sodium chloride 5.84. Potassium chloride 6.72. Sodium bicarbonate 2.98. Sodium sulfate 22.72. Flavor ingredients 0.500. When dissolved in sufficient water to make 4 liters, the final solution contains 125 mEq/L sodium, 10 mEq/L potassium, 20 mEq/L bicarbonate, 80 mEq/L sulfate, 35 mEq/L chloride and 18 mEq/L polyethylene glycol 3350. The reconstituted solution is an isosmotic solution, for oral administration, having mild salty taste. This preparation can be used without the lemon flavor pack and is administered orally or via nasogastric tube. Each lemon flavor pack (2 g) contains natural lemon flavor powder, saccharin sodium, maltodextrin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43386-580-31</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (43386-580-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>43386-0580-31</NDC11Code>
<ProductNDC>43386-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
<NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202191</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoclopramide Orally Disintegrating Tablets is indicated in adults for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux disease (GERD) who fail to respond to conventional therapy., 2 Relief of symptoms associated with acute and recurrent diabetic gastroparesis (gastric stasis).</IndicationAndUsage>
<Description>Metoclopramide hydrochloride, the active ingredient of Metoclopramide Orally Disintegrating Tablets, is a dopamine-2 (D2) antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate), is a white or almost white crystalline powder, freely soluble in water. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. The molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is. Metoclopramide Orally Disintegrating Tablets is an orally disintegrating tablet for oral administration and is available in 5 mg and 10 mg strengths. : 1 Each Metoclopramide Orally Disintegrating Tablets 5 mg tablet contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride USP)., 2 Each Metoclopramide Orally Disintegrating Tablets 10 mg tablet contains 10 mg metoclopramide (equivalent to 11.82 mg metoclopramide hydrochloride USP)., 3 Metoclopramide Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43386-580-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (43386-580-30) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>43386-0580-30</NDC11Code>
<ProductNDC>43386-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
<NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202191</ApplicationNumber>
<LabelerName>GAVIS Pharmaceuticals, LLC</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>40032-580-31</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (40032-580-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>40032-0580-31</NDC11Code>
<ProductNDC>40032-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
<NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202191</ApplicationNumber>
<LabelerName>Novel Laboratories, Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoclopramide Orally Disintegrating Tablets are a dopamine receptor antagonist indicated for: 1 Relief of Symptomatic Gastroesophageal Reflux: short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy (1.1), 2 Diabetic Gastroparesis (Diabetic Gastric Stasis): the relief of symptoms in adults associated with acute and recurrent diabetic gastroparesis (gastric stasis) (1.2).</IndicationAndUsage>
<Description>Metoclopramide Hydrochloride Orally Disintegrating Tablet is an orally disintegrating tablet formulation of metoclopramide hydrochloride. The 5 mg strength tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and "581" on the other side; it is comprised of 5 mg metoclopramide (as 5.91 mg of metoclopramide hydrochloride). The 10 mg tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and "580" on the other side; it is comprised of 10 mg metoclopramide (as 11.82 mg of metoclopramide hydrochloride). The active ingredient, metoclopramide hydrochloride, is a white crystalline, odorless substance, freely soluble in water. Chemically, it is 4 amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is shown in Figure 1. Figure 1. Metoclopramide Hydrochloride Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43386-022-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (43386-022-31) / 10 TABLET in 1 BLISTER PACK (43386-022-30) </PackageDescription>
<NDC11Code>43386-0022-31</NDC11Code>
<ProductNDC>43386-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160822</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207526</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.</IndicationAndUsage>
<Description>Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with "n 022" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43386-088-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (43386-088-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK (43386-088-30) </PackageDescription>
<NDC11Code>43386-0088-31</NDC11Code>
<ProductNDC>43386-088</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207371</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4).</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole. The inactive ingredients include lactose monohydrate, pregelatinized starch (maize starch), croscarmellose sodium, povidone, magnesium stearate and a coating containing hypromellose (HPMC 2910), titanium dioxide, lactose monohydrate and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43386-089-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (43386-089-31) / 10 TABLET, FILM COATED in 1 BLISTER PACK (43386-089-30) </PackageDescription>
<NDC11Code>43386-0089-31</NDC11Code>
<ProductNDC>43386-089</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207371</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4).</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole. The inactive ingredients include lactose monohydrate, pregelatinized starch (maize starch), croscarmellose sodium, povidone, magnesium stearate and a coating containing hypromellose (HPMC 2910), titanium dioxide, lactose monohydrate and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43386-090-19</NDCCode>
<PackageDescription>274.31 g in 1 BOTTLE (43386-090-19) </PackageDescription>
<NDC11Code>43386-0090-19</NDC11Code>
<ProductNDC>43386-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte G</ProprietaryName>
<ProprietaryNameSuffix>Tm</ProprietaryNameSuffix>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090231</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>236; 22.74; 6.74; 5.86; 2.97</StrengthNumber>
<StrengthUnit>g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults. (1).</IndicationAndUsage>
<Description>Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>43386-090-91</NDCCode>
<PackageDescription>274.31 g in 1 BOTTLE (43386-090-91)</PackageDescription>
<NDC11Code>43386-0090-91</NDC11Code>
<ProductNDC>43386-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte G</ProprietaryName>
<ProprietaryNameSuffix>Tm</ProprietaryNameSuffix>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090231</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>236; 22.74; 6.74; 5.86; 2.97</StrengthNumber>
<StrengthUnit>g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g</StrengthUnit>
<Pharm_Classes>Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).</IndicationAndUsage>
<Description>For oral solution: Each 4 liter (4L) GaviLyte-G jug contains a white powder for reconstitution. GaviLyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 236 g, sodium sulfate (anhydrous) 22.74 g, sodium bicarbonate 6.74 g, sodium chloride 5.86 g, potassium chloride 2.97 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>43386-194-31</NDCCode>
<PackageDescription>100 POUCH in 1 CARTON (43386-194-31) / 1.5 g in 1 POUCH (43386-194-90) </PackageDescription>
<NDC11Code>43386-0194-31</NDC11Code>
<ProductNDC>43386-194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210241</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1.54g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium Chloride is a white crystalline powderIt is freely soluble in water and practically insoluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: Citric Acid Anhydrous, Silicon Dioxide, FD&C Yellow No.6, N-C Natural and Artificial Orange Flavor, and Sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43386-581-31</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (43386-581-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>43386-0581-31</NDC11Code>
<ProductNDC>43386-581</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
<NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202191</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoclopramide Orally Disintegrating Tablets is indicated in adults for the: 1 Treatment for 4 to 12 weeks of symptomatic, documented gastroesophageal reflux disease (GERD) who fail to respond to conventional therapy., 2 Relief of symptoms associated with acute and recurrent diabetic gastroparesis (gastric stasis).</IndicationAndUsage>
<Description>Metoclopramide hydrochloride, the active ingredient of Metoclopramide Orally Disintegrating Tablets, is a dopamine-2 (D2) antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate), is a white or almost white crystalline powder, freely soluble in water. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. The molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is. Metoclopramide Orally Disintegrating Tablets is an orally disintegrating tablet for oral administration and is available in 5 mg and 10 mg strengths. : 1 Each Metoclopramide Orally Disintegrating Tablets 5 mg tablet contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride USP)., 2 Each Metoclopramide Orally Disintegrating Tablets 10 mg tablet contains 10 mg metoclopramide (equivalent to 11.82 mg metoclopramide hydrochloride USP)., 3 Metoclopramide Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0143-9533-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX, UNIT-DOSE (0143-9533-01) > 25 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9533-01</NDC11Code>
<ProductNDC>0143-9533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol Sodium</ProprietaryName>
<NonProprietaryName>Allopurinol Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076870</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol Sodium for Injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>Allopurinol Sodium for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 162.5 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol Sodium for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>40032-581-31</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (40032-581-31) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>40032-0581-31</NDC11Code>
<ProductNDC>40032-581</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
<NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202191</ApplicationNumber>
<LabelerName>Novel Laboratories, Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoclopramide Orally Disintegrating Tablets are a dopamine receptor antagonist indicated for: 1 Relief of Symptomatic Gastroesophageal Reflux: short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy (1.1), 2 Diabetic Gastroparesis (Diabetic Gastric Stasis): the relief of symptoms in adults associated with acute and recurrent diabetic gastroparesis (gastric stasis) (1.2).</IndicationAndUsage>
<Description>Metoclopramide Hydrochloride Orally Disintegrating Tablet is an orally disintegrating tablet formulation of metoclopramide hydrochloride. The 5 mg strength tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and "581" on the other side; it is comprised of 5 mg metoclopramide (as 5.91 mg of metoclopramide hydrochloride). The 10 mg tablets are round, white to off-white, flat faced beveled edge tablet debossed with 'N' on one side and "580" on the other side; it is comprised of 10 mg metoclopramide (as 11.82 mg of metoclopramide hydrochloride). The active ingredient, metoclopramide hydrochloride, is a white crystalline, odorless substance, freely soluble in water. Chemically, it is 4 amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. Its molecular formula is C14H22ClN3O2HClH2O. Its molecular weight is 354.3. The structural formula is shown in Figure 1. Figure 1. Metoclopramide Hydrochloride Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>59310-580-20</NDCCode>
<PackageDescription>1 INHALER in 1 BOX (59310-580-20) / 200 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>59310-0580-20</NDC11Code>
<ProductNDC>59310-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Proair Respiclick</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150423</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205636</ApplicationNumber>
<LabelerName>Teva Respiratory, LLC</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROAIR RESPICLICK is a beta2-adrenergic agonist indicated for: 1 Treatment or prevention of bronchospasm in patients 4 years of age and older with reversible obstructive airway disease. (1.1), 2 Prevention of exercise-induced bronchospasm in patients 4 years of age and older. (1.2).</IndicationAndUsage>
<Description>The active ingredient of PROAIR RESPICLICK inhalation powder is albuterol sulfate, a racemic salt of albuterol. Albuterol sulfate is a beta2-adrenergic agonist. It has the chemical name α1-[(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt), and the following chemical structure. The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C13H21NO3)2H2SO4. Albuterol sulfate is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate is the official U.S. Adopted Name in the United States, and salbutamol sulfate is the recommended World Health Organization international nonproprietary name. PROAIR RESPICLICK is an inhalation-driven, multi-dose inhalation powder (dry powder inhaler) for oral inhalation only. It contains a formulation blend of albuterol sulfate with alpha-lactose monohydrate. Each actuation provides a metered dose of 2.6 mg of the formulation containing 117 mcg of albuterol sulfate (equivalent to 97 mcg of albuterol base) and lactose from the device reservoir. Under standardized in vitro test conditions with fixed flow rates ranging from 58 to 71 L/min, and with a total air volume of 2 L, the PROAIR RESPICLICK inhaler delivers 108 mcg of albuterol sulfate (equivalent to 90 mcg of albuterol base) with lactose from the mouthpiece. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. In a study that investigated the peak inspiratory flow rate (PIFR) in asthma (n=27, ages 12 to 17 years old and n=50, ages 18 to 45 years old) and COPD (n=50, over 50 years old) patients, the mean PIFR achieved by subjects was >60 L/min (range = 31 to 110 L/min.), indicating that patients would be able to achieve the required inspiratory flow to operate the MDPI device correctly. The inhaler is provided for 200 actuations (inhalations).</Description>
</NDC>
<NDC>
<NDCCode>59310-580-21</NDCCode>
<PackageDescription>1 INHALER in 1 BOX (59310-580-21) > 200 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>59310-0580-21</NDC11Code>
<ProductNDC>59310-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Proair Respiclick</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150423</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205636</ApplicationNumber>
<LabelerName>Teva Respiratory, LLC</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROAIR RESPICLICK is a beta2-adrenergic agonist indicated for: 1 Treatment or prevention of bronchospasm in patients 4 years of age and older with reversible obstructive airway disease. (1.1), 2 Prevention of exercise-induced bronchospasm in patients 4 years of age and older. (1.2).</IndicationAndUsage>
<Description>The active ingredient of PROAIR RESPICLICK inhalation powder is albuterol sulfate, a racemic salt of albuterol. Albuterol sulfate is a beta2-adrenergic agonist. It has the chemical name α1-[(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt), and the following chemical structure. The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C13H21NO3)2H2SO4. Albuterol sulfate is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate is the official U.S. Adopted Name in the United States, and salbutamol sulfate is the recommended World Health Organization international nonproprietary name. PROAIR RESPICLICK is an inhalation-driven, multi-dose inhalation powder (dry powder inhaler) for oral inhalation only. It contains a formulation blend of albuterol sulfate with alpha-lactose monohydrate. Each actuation provides a metered dose of 2.6 mg of the formulation containing 117 mcg of albuterol sulfate (equivalent to 97 mcg of albuterol base) and lactose from the device reservoir. Under standardized in vitro test conditions with fixed flow rates ranging from 58 to 71 L/min, and with a total air volume of 2 L, the PROAIR RESPICLICK inhaler delivers 108 mcg of albuterol sulfate (equivalent to 90 mcg of albuterol base) with lactose from the mouthpiece. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. In a study that investigated the peak inspiratory flow rate (PIFR) in asthma (n=27, ages 12 to 17 years old and n=50, ages 18 to 45 years old) and COPD (n=50, over 50 years old) patients, the mean PIFR achieved by subjects was >60 L/min (range = 31 to 110 L/min.), indicating that patients would be able to achieve the required inspiratory flow to operate the MDPI device correctly. The inhaler is provided for 200 actuations (inhalations).</Description>
</NDC>
<NDC>
<NDCCode>65219-380-30</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (65219-380-30) / 25 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>65219-0380-30</NDC11Code>
<ProductNDC>65219-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212363</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is:. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>67457-187-50</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (67457-187-50) > 25 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>67457-0187-50</NDC11Code>
<ProductNDC>67457-187</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aloprim</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020298</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALOPRIM is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>ALOPRIM (allopurinol) for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 148 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. ALOPRIM (allopurinol) for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>67457-978-50</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (67457-978-50) / 25 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>67457-0978-50</NDC11Code>
<ProductNDC>67457-978</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aloprim</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201118</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020298</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20201118</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ALOPRIM is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>ALOPRIM (allopurinol) for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 148 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. ALOPRIM (allopurinol) for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>68083-380-01</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68083-380-01) > 25 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>68083-0380-01</NDC11Code>
<ProductNDC>68083-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212363</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol for injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>Allopurinol for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 153 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>72572-580-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (72572-580-25) / 2 mL in 1 VIAL (72572-580-01) </PackageDescription>
<NDC11Code>72572-0580-25</NDC11Code>
<ProductNDC>72572-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prochlorperazine Edisylate</ProprietaryName>
<NonProprietaryName>Prochlorperazine Edisylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20191118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089903</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>PROCHLORPERAZINE EDISYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To control severe nausea and vomiting. For the treatment of schizophrenia. Prochlorperazine has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Prochlorperazine edisylate, 2-Chloro-10-[3-(4-methyl-1-piperazinyl)propyl] phenothiazine 1,2-ethanedisulfonate (1:1), has the following structural formula. Prochlorperazine Edisylate Injection, an antiemetic and antipsychotic, is a sterile solution intended for intramuscular or intravenous administration. Each mL contains prochlorperazine 5 mg as the edisylate, monobasic sodium phosphate monohydrate 5 mg, sodium tartrate dihydrate 12 mg, saccharin sodium 0.9 mg and benzyl alcohol 7.5 mg in Water for Injection. pH 4.2-6.2.</Description>
</NDC>
<NDC>
<NDCCode>43386-016-61</NDCCode>
<PackageDescription>150 mL in 1 BOTTLE (43386-016-61) </PackageDescription>
<NDC11Code>43386-0016-61</NDC11Code>
<ProductNDC>43386-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205878</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>16.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium topical solution is a nonsteroidal anti-inflammatory drug indicated for the treatment of signs and symptoms of osteoarthritis of the knee(s). (1).</IndicationAndUsage>
<Description>Diclofenac sodium topical solution contains 1.5% w/w diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug (NSAID), designated chemically as 2-[(2,6 dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. It is a white to off-white, hygroscopic crystalline powder that is freely soluble in methanol, soluble in alcohol, slightly soluble in acetone and sparingly soluble in water. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2 and it has the following structural formula. Each 1 mL of solution contains 16.05 mg of diclofenac sodium. The inactive ingredients in diclofenac sodium topical solution include: dimethyl sulfoxide USP (DMSO, 45.5% w/w), propylene glycol, alcohol, glycerin and purified water.</Description>
</NDC>
<NDC>
<NDCCode>43386-022-02</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (43386-022-02) </PackageDescription>
<NDC11Code>43386-0022-02</NDC11Code>
<ProductNDC>43386-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160822</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207526</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.</IndicationAndUsage>
<Description>Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with "n 022" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43386-022-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43386-022-05) </PackageDescription>
<NDC11Code>43386-0022-05</NDC11Code>
<ProductNDC>43386-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160822</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207526</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections (1.5). Limitations of Use (1.6): 1 Linezolid Tablets are not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of Linezolid formulations given for longer than 28 days have not been evaluated in controlled, 3 clinical trials.</IndicationAndUsage>
<Description>Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with "n 022" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43386-026-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-026-02) > 20 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0026-02</NDC11Code>
<ProductNDC>43386-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206003</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-12-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>43386-026-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-026-06) > 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0026-06</NDC11Code>
<ProductNDC>43386-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206003</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-12-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Topical Solution USP, 0.05% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure. Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>43386-028-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-028-60) / 50 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0028-60</NDC11Code>
<ProductNDC>43386-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206075</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.</IndicationAndUsage>
<Description>Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>43386-028-61</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-028-61) > 25 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0028-61</NDC11Code>
<ProductNDC>43386-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206075</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clobetasol propionate topical solution, USP is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.</IndicationAndUsage>
<Description>Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula:. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>43386-030-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (43386-030-01) </PackageDescription>
<NDC11Code>43386-0030-01</NDC11Code>
<ProductNDC>43386-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monobasic Sodium Phosphate And Dibasic Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Monobasic Sodium Phosphate And Dibasic Sodium Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079247</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>.398; 1.105</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are indicated for cleansing of the colon as a preparation for colonoscopy in adults.</IndicationAndUsage>
<Description>Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets (sodium phosphate monobasic monohydrate and sodium phosphate dibasic anhydrous) is an osmotic laxative used to clean the colon prior to colonoscopy. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is manufactured with a highly soluble tablet binder and does not contain microcrystalline cellulose (MCC). Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are white to off-white uncoated tablet, modified oval shaped, biconvex, bisect on one side and plain on the other. Debossed "N" on the left side of the bisect and "03" on the right side of the bisect. Each Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablet contains 1.102 grams of Monobasic Sodium Phosphate, USP and 0.398 grams of Dibasic Sodium Phosphate, USP for a total of 1.5 grams of sodium phosphate per tablet. Inert ingredients include polyethylene glycol 8000, NF; and magnesium stearate, NF. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is gluten-free. The structural and molecular formulae and molecular weights of the active ingredients are shown below: 1 Monobasic sodium phosphate, USP.</Description>
</NDC>
<NDC>
<NDCCode>43386-038-60</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43386-038-60) / 75 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43386-0038-60</NDC11Code>
<ProductNDC>43386-038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206799</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160601</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Voriconazole is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis (1.1), 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2), 3 Esophageal candidiasis (1.3), 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani , in patients intolerant of, or refractory to, other therapy (1.4).</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole for oral suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 49 g powder for oral suspension are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include colloidal silicon dioxide, titanium dioxide, xanthan gum, sodium citrate dihydrate, sodium benzoate, anhydrous citric acid, natural and artificial orange flavor, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>43386-050-19</NDCCode>
<PackageDescription>438.4 g in 1 BOTTLE (43386-050-19) </PackageDescription>
<NDC11Code>43386-0050-19</NDC11Code>
<ProductNDC>43386-050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte-n</ProprietaryName>
<NonProprietaryName>Polyethylene Glycol-3350, Sodium Chloride, Potassium Chloride And Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090019</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM CHLORIDE; SODIUM BICARBONATE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>420; 11.2; 5.72; 1.48</StrengthNumber>
<StrengthUnit>g/438.4g; g/438.4g; g/438.4g; g/438.4g</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090528</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>GaviLyte-N is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy in adults and pediatric patients aged 6 months or greater (1).</IndicationAndUsage>
<Description>For oral solution: Each 4 liter (4L) GaviLyte-N jug contains a white powder for reconstitution. GaviLyte-N is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 420g, sodium bicarbonate 5.72 g, sodium chloride 11.2 g, potassium chloride 1.4 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>43386-060-19</NDCCode>
<PackageDescription>278.26 g in 1 BOTTLE (43386-060-19) </PackageDescription>
<NDC11Code>43386-0060-19</NDC11Code>
<ProductNDC>43386-060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte - C</ProprietaryName>
<ProprietaryNameSuffix>Tm</ProprietaryNameSuffix>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes With Flavor Pack</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090186</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM CHLORIDE; POTASSIUM CHLORIDE; SODIUM BICARBONATE; SODIUM SULFATE ANHYDROUS</SubstanceName>
<StrengthNumber>240; 5.84; 2.98; 6.72; 22.72</StrengthNumber>
<StrengthUnit>g/278.26g; g/278.26g; g/278.26g; g/278.26g; g/278.26g</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090601</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>GaviLyte- C with flavor pack is indicated for bowel cleansing prior to colonoscopy or barium enema X-ray examination.</IndicationAndUsage>
<Description>GaviLyte- C with flavor pack is a white, colon lavage preparation provided as water-soluble components for solution. In solution this preparation with lemon flavor pack added delivers the following, in grams per liter. Polyethylene glycol 3350 240.00. Sodium chloride 5.84. Potassium chloride 6.72. Sodium bicarbonate 2.98. Sodium sulfate 22.72. Flavor ingredients 0.500. When dissolved in sufficient water to make 4 liters, the final solution contains 125 mEq/L sodium, 10 mEq/L potassium, 20 mEq/L bicarbonate, 80 mEq/L sulfate, 35 mEq/L chloride and 18 mEq/L polyethylene glycol 3350. The reconstituted solution is an isosmotic solution, for oral administration, having mild salty taste. This preparation can be used without the lemon flavor pack and is administered orally or via nasogastric tube. Each lemon flavor pack (2 g) contains natural lemon flavor powder, saccharin sodium, maltodextrin.</Description>
</NDC>
</NDCList>