{
"NDC": [
{
"NDCCode": "43547-436-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (43547-436-09) ",
"NDC11Code": "43547-0436-09",
"ProductNDC": "43547-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208782",
"LabelerName": "Solco Healthcare LLC",
"SubstanceName": "ENTECAVIR ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending."
},
{
"NDCCode": "12634-436-09",
"PackageDescription": "35 TABLET in 1 BOTTLE (12634-436-09)",
"NDC11Code": "12634-0436-09",
"ProductNDC": "12634-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "65162-436-09",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-09) ",
"NDC11Code": "65162-0436-09",
"ProductNDC": "65162-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203995",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; 200",
"StrengthUnit": "mg/1; ug/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].",
"Description": "Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate."
},
{
"NDCCode": "71919-436-09",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (71919-436-09) ",
"NDC11Code": "71919-0436-09",
"ProductNDC": "71919-436",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Magnolia Grandiflora",
"NonProprietaryName": "Magnolia Grandiflora Flower",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110707",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "MAGNOLIA GRANDIFLORA FLOWER",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110707",
"SamplePackage": "N"
},
{
"NDCCode": "43547-436-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43547-436-03) ",
"NDC11Code": "43547-0436-03",
"ProductNDC": "43547-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208782",
"LabelerName": "Solco Healthcare LLC",
"SubstanceName": "ENTECAVIR ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending."
},
{
"NDCCode": "43547-436-15",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (43547-436-15) ",
"NDC11Code": "43547-0436-15",
"ProductNDC": "43547-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208782",
"LabelerName": "Solco Healthcare LLC",
"SubstanceName": "ENTECAVIR ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending."
},
{
"NDCCode": "43547-436-50",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (43547-436-50) ",
"NDC11Code": "43547-0436-50",
"ProductNDC": "43547-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208782",
"LabelerName": "Solco Healthcare LLC",
"SubstanceName": "ENTECAVIR ANHYDROUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180401",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending."
},
{
"NDCCode": "43547-001-09",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (43547-001-09) ",
"NDC11Code": "43547-0001-09",
"ProductNDC": "43547-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214920",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole magnesium delayed-release capsules are a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).",
"Description": "The active ingredient in esomeprazole magnesium delayed-release capsules for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium delayed-release capsules, USP are supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsules contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate) in the form of enteric-coated pellets with the following inactive ingredients: hydroxypropyl cellulose, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: Black iron oxide, FD&C Blue #1, FD&C Red #3, gelatin, potassium hydroxide, propylene glycol, shellac, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "43547-002-09",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (43547-002-09) ",
"NDC11Code": "43547-0002-09",
"ProductNDC": "43547-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214920",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230328",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole magnesium delayed-release capsules are a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).",
"Description": "The active ingredient in esomeprazole magnesium delayed-release capsules for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium delayed-release capsules, USP are supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsules contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate) in the form of enteric-coated pellets with the following inactive ingredients: hydroxypropyl cellulose, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: Black iron oxide, FD&C Blue #1, FD&C Red #3, gelatin, potassium hydroxide, propylene glycol, shellac, and titanium dioxide. Meets USP dissolution test 3."
},
{
"NDCCode": "43547-003-09",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (43547-003-09) ",
"NDC11Code": "43547-0003-09",
"ProductNDC": "43547-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208003",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "FINGOLIMOD",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211026",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each 0.5 mg fingolimod capsule contains the following inactive ingredients: black iron oxide, gelatin, magnesium stearate, potassium hydroxide, propylene glycol, silicified microcrystalline cellulose, shellac and titanium dioxide."
},
{
"NDCCode": "43547-005-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-005-09) ",
"NDC11Code": "43547-0005-09",
"ProductNDC": "43547-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Roflumilast",
"NonProprietaryName": "Roflumilast",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208299",
"LabelerName": "Solco Healthcare US, LLC.",
"SubstanceName": "ROFLUMILAST",
"StrengthNumber": "500",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Phosphodiesterase 4 Inhibitor [EPC], Phosphodiesterase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220510",
"SamplePackage": "N",
"IndicationAndUsage": "Roflumilast is indicated as a treatment to reduce the risk of COPD exacerbations in patients with severe COPD associated with chronic bronchitis and a history of exacerbations. Limitations of Use. Roflumilast is not a bronchodilator and is not indicated for the relief of acute bronchospasm.",
"Description": "The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5-dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its empirical formula is C17H14Cl2F2N2O3 and the molecular weight is 403.22. The chemical structure is. The drug substance is a white to off-white non-hygroscopic powder with a melting point of 160oC. It is practically insoluble in water and hexane, sparingly soluble in ethanol, and freely soluble in acetone. Roflumilast tablets are supplied as white to off-white, round tablets, debossed with “S” on one side and “500” on the other side. Each tablet contains 500 mcg of roflumilast. Each roflumilast tablet for oral administration contains the following inactive ingredients: lactose monohydrate, corn starch, copovidone, hydroxypropyl cellulose, and sodium stearyl fumarate."
},
{
"NDCCode": "43547-275-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43547-275-09) ",
"NDC11Code": "43547-0275-09",
"ProductNDC": "43547-275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200292",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride is indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil Hydrochloride Tablets, USP, are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. The film of 5 mg tablets coating contains FD&C Blue #2/INDIGO CARMINE ALUMINUM LAKE, hypromellose, polyethylene glycol, and titanium dioxide. The film of 10 mg tablets coating contains hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "43547-276-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43547-276-09) ",
"NDC11Code": "43547-0276-09",
"ProductNDC": "43547-276",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200292",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride is indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil Hydrochloride Tablets, USP, are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. The film of 5 mg tablets coating contains FD&C Blue #2/INDIGO CARMINE ALUMINUM LAKE, hypromellose, polyethylene glycol, and titanium dioxide. The film of 10 mg tablets coating contains hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "43547-277-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-277-09)",
"NDC11Code": "43547-0277-09",
"ProductNDC": "43547-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203071",
"LabelerName": "Solco healthcare U.S., LLC",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate."
},
{
"NDCCode": "43547-278-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-278-09)",
"NDC11Code": "43547-0278-09",
"ProductNDC": "43547-278",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203071",
"LabelerName": "Solco healthcare U.S., LLC",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate."
},
{
"NDCCode": "43547-279-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-279-09)",
"NDC11Code": "43547-0279-09",
"ProductNDC": "43547-279",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203071",
"LabelerName": "Solco healthcare U.S., LLC",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate."
},
{
"NDCCode": "43547-283-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-283-09) ",
"NDC11Code": "43547-0283-09",
"ProductNDC": "43547-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207882",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170820",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture."
},
{
"NDCCode": "43547-284-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-284-09) ",
"NDC11Code": "43547-0284-09",
"ProductNDC": "43547-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207882",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170820",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture."
},
{
"NDCCode": "43547-285-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-285-09) ",
"NDC11Code": "43547-0285-09",
"ProductNDC": "43547-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207882",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170820",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture."
},
{
"NDCCode": "43547-288-09",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-288-09) ",
"NDC11Code": "43547-0288-09",
"ProductNDC": "43547-288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "Sr",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202304",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141101",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7."
},
{
"NDCCode": "43547-289-09",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-289-09) ",
"NDC11Code": "43547-0289-09",
"ProductNDC": "43547-289",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "Sr",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202304",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141101",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7."
},
{
"NDCCode": "43547-290-09",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-290-09) ",
"NDC11Code": "43547-0290-09",
"ProductNDC": "43547-290",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "Sr",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202304",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141101",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7."
},
{
"NDCCode": "43547-295-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-295-09) ",
"NDC11Code": "43547-0295-09",
"ProductNDC": "43547-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Febuxostat",
"NonProprietaryName": "Febuxostat",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206266",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "FEBUXOSTAT",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "Febuxostat tablets are a xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. Limitations of Use:. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.",
"Description": "Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white crystalline powder that is freely soluble in dimethylformamide; soluble in dimethylsulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 205oC to 208oC. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium croscarmellose. Febuxostat tablets are coated with Opadry II, green which contains FD&C blue #2/indigo carmine aluminum lake, iron oxide yellow, macrogol, polyvinyl alcohol-part. hydrolyzed, talc, and titanium dioxide."
},
{
"NDCCode": "43547-296-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-296-09) ",
"NDC11Code": "43547-0296-09",
"ProductNDC": "43547-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Febuxostat",
"NonProprietaryName": "Febuxostat",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206266",
"LabelerName": "Solco Healthcare US LLC",
"SubstanceName": "FEBUXOSTAT",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "Febuxostat tablets are a xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. Limitations of Use:. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.",
"Description": "Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white crystalline powder that is freely soluble in dimethylformamide; soluble in dimethylsulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 205oC to 208oC. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium croscarmellose. Febuxostat tablets are coated with Opadry II, green which contains FD&C blue #2/indigo carmine aluminum lake, iron oxide yellow, macrogol, polyvinyl alcohol-part. hydrolyzed, talc, and titanium dioxide."
},
{
"NDCCode": "43547-299-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-299-09) ",
"NDC11Code": "43547-0299-09",
"ProductNDC": "43547-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil",
"NonProprietaryName": "Olmesartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206720",
"LabelerName": "Solco Healthcare US, LLC.",
"SubstanceName": "OLMESARTAN MEDOXOMIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220304",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43547-300-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-300-09) ",
"NDC11Code": "43547-0300-09",
"ProductNDC": "43547-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil",
"NonProprietaryName": "Olmesartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206720",
"LabelerName": "Solco Healthcare US, LLC.",
"SubstanceName": "OLMESARTAN MEDOXOMIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220304",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43547-301-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-301-09) ",
"NDC11Code": "43547-0301-09",
"ProductNDC": "43547-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil",
"NonProprietaryName": "Olmesartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206720",
"LabelerName": "Solco Healthcare US, LLC.",
"SubstanceName": "OLMESARTAN MEDOXOMIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220304",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43547-302-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-302-09) ",
"NDC11Code": "43547-0302-09",
"ProductNDC": "43547-302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205363",
"LabelerName": "Solco Healthcare U.S., LLC",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171204",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .",
"Description": "Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide."
},
{
"NDCCode": "43547-303-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-303-09) ",
"NDC11Code": "43547-0303-09",
"ProductNDC": "43547-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205363",
"LabelerName": "Solco Healthcare U.S., LLC",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171204",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .",
"Description": "Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide."
},
{
"NDCCode": "43547-304-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-304-09) ",
"NDC11Code": "43547-0304-09",
"ProductNDC": "43547-304",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205363",
"LabelerName": "Solco Healthcare U.S., LLC",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171204",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .",
"Description": "Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43547-436-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (43547-436-09) </PackageDescription>
<NDC11Code>43547-0436-09</NDC11Code>
<ProductNDC>43547-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208782</ApplicationNumber>
<LabelerName>Solco Healthcare LLC</LabelerName>
<SubstanceName>ENTECAVIR ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>12634-436-09</NDCCode>
<PackageDescription>35 TABLET in 1 BOTTLE (12634-436-09)</PackageDescription>
<NDC11Code>12634-0436-09</NDC11Code>
<ProductNDC>12634-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>65162-436-09</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-09) </PackageDescription>
<NDC11Code>65162-0436-09</NDC11Code>
<ProductNDC>65162-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203995</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; 200</StrengthNumber>
<StrengthUnit>mg/1; ug/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>71919-436-09</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (71919-436-09) </PackageDescription>
<NDC11Code>71919-0436-09</NDC11Code>
<ProductNDC>71919-436</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Magnolia Grandiflora</ProprietaryName>
<NonProprietaryName>Magnolia Grandiflora Flower</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110707</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>MAGNOLIA GRANDIFLORA FLOWER</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43547-436-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43547-436-03) </PackageDescription>
<NDC11Code>43547-0436-03</NDC11Code>
<ProductNDC>43547-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208782</ApplicationNumber>
<LabelerName>Solco Healthcare LLC</LabelerName>
<SubstanceName>ENTECAVIR ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>43547-436-15</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (43547-436-15) </PackageDescription>
<NDC11Code>43547-0436-15</NDC11Code>
<ProductNDC>43547-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208782</ApplicationNumber>
<LabelerName>Solco Healthcare LLC</LabelerName>
<SubstanceName>ENTECAVIR ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>43547-436-50</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (43547-436-50) </PackageDescription>
<NDC11Code>43547-0436-50</NDC11Code>
<ProductNDC>43547-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208782</ApplicationNumber>
<LabelerName>Solco Healthcare LLC</LabelerName>
<SubstanceName>ENTECAVIR ANHYDROUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir is indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25oC ± 0.5oC. Entecavir film-coated tablets, USP, are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, crospovidone, povidone, and magnesium stearate. The tablet coating contains titanium dioxide, talc, polyethylene glycol 3350, lecithin (soya), polyvinyl alcohol-part hydrolyzed, and iron oxide red (1 mg tablet only). USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>43547-001-09</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (43547-001-09) </PackageDescription>
<NDC11Code>43547-0001-09</NDC11Code>
<ProductNDC>43547-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214920</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole magnesium delayed-release capsules are a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
<Description>The active ingredient in esomeprazole magnesium delayed-release capsules for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium delayed-release capsules, USP are supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsules contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate) in the form of enteric-coated pellets with the following inactive ingredients: hydroxypropyl cellulose, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: Black iron oxide, FD&C Blue #1, FD&C Red #3, gelatin, potassium hydroxide, propylene glycol, shellac, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>43547-002-09</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (43547-002-09) </PackageDescription>
<NDC11Code>43547-0002-09</NDC11Code>
<ProductNDC>43547-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214920</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole magnesium delayed-release capsules are a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
<Description>The active ingredient in esomeprazole magnesium delayed-release capsules for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium delayed-release capsules, USP are supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsules contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate) in the form of enteric-coated pellets with the following inactive ingredients: hydroxypropyl cellulose, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, sugar spheres, talc, and triethyl citrate. The capsule shells have the following inactive ingredients: Black iron oxide, FD&C Blue #1, FD&C Red #3, gelatin, potassium hydroxide, propylene glycol, shellac, and titanium dioxide. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>43547-003-09</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (43547-003-09) </PackageDescription>
<NDC11Code>43547-0003-09</NDC11Code>
<ProductNDC>43547-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208003</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>FINGOLIMOD</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride, USP is a white to practically white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each 0.5 mg capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each 0.5 mg fingolimod capsule contains the following inactive ingredients: black iron oxide, gelatin, magnesium stearate, potassium hydroxide, propylene glycol, silicified microcrystalline cellulose, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-005-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-005-09) </PackageDescription>
<NDC11Code>43547-0005-09</NDC11Code>
<ProductNDC>43547-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Roflumilast</ProprietaryName>
<NonProprietaryName>Roflumilast</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208299</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC.</LabelerName>
<SubstanceName>ROFLUMILAST</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 4 Inhibitor [EPC], Phosphodiesterase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Roflumilast is indicated as a treatment to reduce the risk of COPD exacerbations in patients with severe COPD associated with chronic bronchitis and a history of exacerbations. Limitations of Use. Roflumilast is not a bronchodilator and is not indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5-dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its empirical formula is C17H14Cl2F2N2O3 and the molecular weight is 403.22. The chemical structure is. The drug substance is a white to off-white non-hygroscopic powder with a melting point of 160oC. It is practically insoluble in water and hexane, sparingly soluble in ethanol, and freely soluble in acetone. Roflumilast tablets are supplied as white to off-white, round tablets, debossed with “S” on one side and “500” on the other side. Each tablet contains 500 mcg of roflumilast. Each roflumilast tablet for oral administration contains the following inactive ingredients: lactose monohydrate, corn starch, copovidone, hydroxypropyl cellulose, and sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>43547-275-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43547-275-09) </PackageDescription>
<NDC11Code>43547-0275-09</NDC11Code>
<ProductNDC>43547-275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200292</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride is indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil Hydrochloride Tablets, USP, are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. The film of 5 mg tablets coating contains FD&C Blue #2/INDIGO CARMINE ALUMINUM LAKE, hypromellose, polyethylene glycol, and titanium dioxide. The film of 10 mg tablets coating contains hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-276-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43547-276-09) </PackageDescription>
<NDC11Code>43547-0276-09</NDC11Code>
<ProductNDC>43547-276</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200292</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride is indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil Hydrochloride Tablets, USP, are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. The film of 5 mg tablets coating contains FD&C Blue #2/INDIGO CARMINE ALUMINUM LAKE, hypromellose, polyethylene glycol, and titanium dioxide. The film of 10 mg tablets coating contains hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-277-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-277-09)</PackageDescription>
<NDC11Code>43547-0277-09</NDC11Code>
<ProductNDC>43547-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203071</ApplicationNumber>
<LabelerName>Solco healthcare U.S., LLC</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43547-278-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-278-09)</PackageDescription>
<NDC11Code>43547-0278-09</NDC11Code>
<ProductNDC>43547-278</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203071</ApplicationNumber>
<LabelerName>Solco healthcare U.S., LLC</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43547-279-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-279-09)</PackageDescription>
<NDC11Code>43547-0279-09</NDC11Code>
<ProductNDC>43547-279</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203071</ApplicationNumber>
<LabelerName>Solco healthcare U.S., LLC</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Irbesartan is indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and the structural formula. Irbesartan is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Irbesartan is available for oral administration in unscored tablets containing 75 mg, 150 mg, or 300 mg of irbesartan. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, hypromellose, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>43547-283-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-283-09) </PackageDescription>
<NDC11Code>43547-0283-09</NDC11Code>
<ProductNDC>43547-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207882</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>43547-284-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-284-09) </PackageDescription>
<NDC11Code>43547-0284-09</NDC11Code>
<ProductNDC>43547-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207882</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>43547-285-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-285-09) </PackageDescription>
<NDC11Code>43547-0285-09</NDC11Code>
<ProductNDC>43547-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207882</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>43547-288-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-288-09) </PackageDescription>
<NDC11Code>43547-0288-09</NDC11Code>
<ProductNDC>43547-288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202304</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>43547-289-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-289-09) </PackageDescription>
<NDC11Code>43547-0289-09</NDC11Code>
<ProductNDC>43547-289</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202304</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>43547-290-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-290-09) </PackageDescription>
<NDC11Code>43547-0290-09</NDC11Code>
<ProductNDC>43547-290</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202304</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>43547-295-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-295-09) </PackageDescription>
<NDC11Code>43547-0295-09</NDC11Code>
<ProductNDC>43547-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Febuxostat</ProprietaryName>
<NonProprietaryName>Febuxostat</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206266</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>FEBUXOSTAT</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Febuxostat tablets are a xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. Limitations of Use:. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.</IndicationAndUsage>
<Description>Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white crystalline powder that is freely soluble in dimethylformamide; soluble in dimethylsulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 205oC to 208oC. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium croscarmellose. Febuxostat tablets are coated with Opadry II, green which contains FD&C blue #2/indigo carmine aluminum lake, iron oxide yellow, macrogol, polyvinyl alcohol-part. hydrolyzed, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-296-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-296-09) </PackageDescription>
<NDC11Code>43547-0296-09</NDC11Code>
<ProductNDC>43547-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Febuxostat</ProprietaryName>
<NonProprietaryName>Febuxostat</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206266</ApplicationNumber>
<LabelerName>Solco Healthcare US LLC</LabelerName>
<SubstanceName>FEBUXOSTAT</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Febuxostat tablets are a xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. Limitations of Use:. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.</IndicationAndUsage>
<Description>Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white crystalline powder that is freely soluble in dimethylformamide; soluble in dimethylsulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 205oC to 208oC. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium croscarmellose. Febuxostat tablets are coated with Opadry II, green which contains FD&C blue #2/indigo carmine aluminum lake, iron oxide yellow, macrogol, polyvinyl alcohol-part. hydrolyzed, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-299-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-299-09) </PackageDescription>
<NDC11Code>43547-0299-09</NDC11Code>
<ProductNDC>43547-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206720</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC.</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43547-300-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-300-09) </PackageDescription>
<NDC11Code>43547-0300-09</NDC11Code>
<ProductNDC>43547-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206720</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC.</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43547-301-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-301-09) </PackageDescription>
<NDC11Code>43547-0301-09</NDC11Code>
<ProductNDC>43547-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206720</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC.</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil is indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is:. Olmesartan medoxomil is a white or off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP, are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil (USP) and the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide, polyvinyl alcohol-part hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc, (5 mg only) FD&C Red #40 Aluminum Lake, (5 mg only) FD&C Yellow #6 Aluminum Lake, (5 mg only) FD&C Blue #1 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43547-302-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-302-09) </PackageDescription>
<NDC11Code>43547-0302-09</NDC11Code>
<ProductNDC>43547-302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205363</ApplicationNumber>
<LabelerName>Solco Healthcare U.S., LLC</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .</IndicationAndUsage>
<Description>Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-303-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-303-09) </PackageDescription>
<NDC11Code>43547-0303-09</NDC11Code>
<ProductNDC>43547-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205363</ApplicationNumber>
<LabelerName>Solco Healthcare U.S., LLC</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .</IndicationAndUsage>
<Description>Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-304-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-304-09) </PackageDescription>
<NDC11Code>43547-0304-09</NDC11Code>
<ProductNDC>43547-304</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205363</ApplicationNumber>
<LabelerName>Solco Healthcare U.S., LLC</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole Tablets are indicated for the treatment of: 1 Schizophrenia , 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder .</IndicationAndUsage>
<Description>Aripiprazole, USP, is an atypical antipsychotic drug that is available as aripiprazole tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. 5 mg and 15 mg tablets also contain colorant red ferric oxide. 10 mg and 20 mg tablets also contain colorant yellow ferric oxide.</Description>
</NDC>
</NDCList>