{
"NDC": [
{
"NDCCode": "43598-002-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-30) ",
"NDC11Code": "43598-0002-30",
"ProductNDC": "43598-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240909",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP."
},
{
"NDCCode": "43598-002-05",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-05) ",
"NDC11Code": "43598-0002-05",
"ProductNDC": "43598-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240909",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP."
},
{
"NDCCode": "43598-002-10",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-10) ",
"NDC11Code": "43598-0002-10",
"ProductNDC": "43598-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240909",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP."
},
{
"NDCCode": "43598-002-90",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-90) ",
"NDC11Code": "43598-0002-90",
"ProductNDC": "43598-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240909",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP."
},
{
"NDCCode": "43598-001-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-001-30) ",
"NDC11Code": "43598-0001-30",
"ProductNDC": "43598-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240909",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP."
},
{
"NDCCode": "43598-018-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-018-30)",
"NDC11Code": "43598-0018-30",
"ProductNDC": "43598-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Augmentin",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19901022",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050564",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"Description": "AUGMENTIN is an oral antibacterial combination consisting of amoxicillin and the beta‑lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6‑aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta‑lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:. : 1 Tablets- Colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. Each tablet of AUGMENTIN contains 0.63 mEq potassium."
},
{
"NDCCode": "43598-096-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-096-30) ",
"NDC11Code": "43598-0096-30",
"ProductNDC": "43598-096",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Javygtor",
"NonProprietaryName": "Sapropterin Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221003",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207685",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "SAPROPTERIN DIHYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]",
"Status": "Active",
"LastUpdate": "2024-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221003",
"SamplePackage": "N",
"IndicationAndUsage": "JAVYGTOR (sapropterin dihydrochloride) is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.",
"Description": "JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as tablets contains 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base). Tablets are off-white to light yellow, mottled, round uncoated tablet debossed with ‘|’ on one side and plain on other side. Each tablet contains the following inactive ingredients: ascorbic acid, colloidal silicon dioxide, crospovidone, low substituted hydroxypropyl cellulose, mannitol, riboflavin and sodium stearyl fumarate."
},
{
"NDCCode": "43598-097-30",
"PackageDescription": "30 PACKET in 1 CARTON (43598-097-30) / 1 POWDER, FOR SOLUTION in 1 PACKET (43598-097-11) ",
"NDC11Code": "43598-0097-30",
"ProductNDC": "43598-097",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Javygtor",
"NonProprietaryName": "Sapropterin Dihydrochloride",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209452",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "SAPROPTERIN DIHYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220916",
"SamplePackage": "N",
"IndicationAndUsage": "JAVYGTOR (sapropterin dihydrochloride) is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.",
"Description": "JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as powder for oral solution containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base) and 500 mg of sapropterin dihydrochloride (equivalent to 384 mg of sapropterin base). JAVYGTOR powder for oral solution is off white to pale yellow powder. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose."
},
{
"NDCCode": "43598-121-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-121-30) ",
"NDC11Code": "43598-0121-30",
"ProductNDC": "43598-121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091023",
"LabelerName": "Dr.Reddy's Laboratories Inc",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250415",
"SamplePackage": "N",
"Description": "Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, round, biconvex, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base or pink, oval, film-coated tablets containing 391.5 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, crospovidone, hydroxy propyl cellulose, lactose monohydrate, microcrystalline cellulose and sodium stearyl fumarate as inactive ingredients. The film-coating contains hypromellose 2910, iron oxide red, polyethylene glycol, talc and titanium dioxide."
},
{
"NDCCode": "43598-122-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-122-30) ",
"NDC11Code": "43598-0122-30",
"ProductNDC": "43598-122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091023",
"LabelerName": "Dr.Reddy's Laboratories Inc",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250415",
"SamplePackage": "N",
"Description": "Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, round, biconvex, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base or pink, oval, film-coated tablets containing 391.5 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, crospovidone, hydroxy propyl cellulose, lactose monohydrate, microcrystalline cellulose and sodium stearyl fumarate as inactive ingredients. The film-coating contains hypromellose 2910, iron oxide red, polyethylene glycol, talc and titanium dioxide."
},
{
"NDCCode": "43598-151-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-151-30) ",
"NDC11Code": "43598-0151-30",
"ProductNDC": "43598-151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag",
"NonProprietaryName": "Eltrombopag",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219121",
"LabelerName": "Dr. Reddy's Laboratories Inc.,",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260317",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag is a thrombopoietin receptor agonist indicated: 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1), 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first- line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3), 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3).",
"Description": "Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid - 2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 grams/mol for eltrombopag olamine and 442.5 grams/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is red to brown crystalline solid, sparingly soluble in dimethylsulphoxide. Eltrombopag tablets contain eltrombopag olamine in the amount equivalent to 12.5 mg, 25 mg, 50 mg, or 75 mg of eltrombopag free acid. The inactive ingredients of eltrombopag tablets are:. Tablet Core: Colloidal silicon dioxide, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose, povidone, and sodium starch glycolate. Coating: iron oxide red, polyethylene glycol, polyvinyl alcohol, and talc. 12.5 mg, 25 mg and 75 mg tablets also contain ferrosoferric oxide and iron oxide yellow."
},
{
"NDCCode": "43598-160-01",
"PackageDescription": "100 CUP, UNIT-DOSE in 1 PACKAGE (43598-160-01) > 30 mL in 1 CUP, UNIT-DOSE (43598-160-31) ",
"NDC11Code": "43598-0160-01",
"ProductNDC": "43598-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213062",
"LabelerName": "Dr. Reddy�s Laboratories, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "meq/30mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose."
},
{
"NDCCode": "43598-160-53",
"PackageDescription": "50 CUP, UNIT-DOSE in 1 PACKAGE (43598-160-53) > 30 mL in 1 CUP, UNIT-DOSE (43598-160-31) ",
"NDC11Code": "43598-0160-53",
"ProductNDC": "43598-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213062",
"LabelerName": "Dr. Reddy�s Laboratories, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "meq/30mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose."
},
{
"NDCCode": "43598-162-30",
"PackageDescription": "30 PACKET in 1 CARTON (43598-162-30) / 1 POWDER, FOR SOLUTION in 1 PACKET (43598-162-11) ",
"NDC11Code": "43598-0162-30",
"ProductNDC": "43598-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Javygtor",
"NonProprietaryName": "Sapropterin Dihydrochloride",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20221116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215798",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "SAPROPTERIN DIHYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221116",
"SamplePackage": "N",
"IndicationAndUsage": "JAVYGTOR is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.",
"Description": "JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as powder for oral solution containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base) and 500 mg of sapropterin dihydrochloride (equivalent to 384 mg of sapropterin base). JAVYGTOR powder for oral solution is off- white to pale yellow powder. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose."
},
{
"NDCCode": "43598-164-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-164-30) ",
"NDC11Code": "43598-0164-30",
"ProductNDC": "43598-164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076255",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20131210",
"SamplePackage": "N",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2."
},
{
"NDCCode": "43598-165-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-165-30) ",
"NDC11Code": "43598-0165-30",
"ProductNDC": "43598-165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076255",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20131210",
"SamplePackage": "N",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2."
},
{
"NDCCode": "43598-166-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-166-30) ",
"NDC11Code": "43598-0166-30",
"ProductNDC": "43598-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076255",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20131210",
"SamplePackage": "N",
"Description": "Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2."
},
{
"NDCCode": "43598-218-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-218-30)",
"NDC11Code": "43598-0218-30",
"ProductNDC": "43598-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19901022",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050564",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"Description": "Amoxicillin and Clavulanate Potassium is an oral antibacterial combination consisting of amoxicillin and the beta‑lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6‑aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta‑lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients: : 1 Tablets- Colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. Each tablet of amoxicillin/clavulanate potassium contains 0.63 mEq potassium."
},
{
"NDCCode": "43598-247-30",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43598-247-30) ",
"NDC11Code": "43598-0247-30",
"ProductNDC": "43598-247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fesoterodine Fumarate",
"NonProprietaryName": "Fesoterodine Fumarate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204975",
"LabelerName": "Dr.Reddy's Laboratories Inc.,",
"SubstanceName": "FESOTERODINE FUMARATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220610",
"SamplePackage": "N",
"Description": "Fesoterodine fumarate extended-release tablets contains fesoterodine fumarate. Fesoterodine is rapidly de-esterified to its active metabolite (R)-2-(3-diisopropylamino-1-phenylpropyl)-4-hydroxymethyl-phenol, or 5-hydroxymethyl tolterodine, which is a muscarinic receptor antagonist. Chemically, fesoterodine fumarate is designated as isobutyric acid 2-((R)-3-diisopropylammonium-1-phenylpropyl)-4-(hydroxymethyl) phenyl ester hydrogen fumarate. The molecular formula is C30H41NO7 and its molecular weight is 527.4. The structural formula is. The asterisk (*) indicates the chiral carbon. Fesoterodine fumarate is a white crystalline powder, which is freely soluble in water. Each Fesoterodine fumarate extended-release tablet contains either 4 mg or 8 mg of fesoterodine fumarate and the following inactive ingredients: FD&C Blue #2, fructose, glyceryl behenate, hypromellose, lactose anhydrous, lecithin soya, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide."
},
{
"NDCCode": "43598-248-30",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43598-248-30) ",
"NDC11Code": "43598-0248-30",
"ProductNDC": "43598-248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fesoterodine Fumarate",
"NonProprietaryName": "Fesoterodine Fumarate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204975",
"LabelerName": "Dr.Reddy's Laboratories Inc.,",
"SubstanceName": "FESOTERODINE FUMARATE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220610",
"SamplePackage": "N",
"Description": "Fesoterodine fumarate extended-release tablets contains fesoterodine fumarate. Fesoterodine is rapidly de-esterified to its active metabolite (R)-2-(3-diisopropylamino-1-phenylpropyl)-4-hydroxymethyl-phenol, or 5-hydroxymethyl tolterodine, which is a muscarinic receptor antagonist. Chemically, fesoterodine fumarate is designated as isobutyric acid 2-((R)-3-diisopropylammonium-1-phenylpropyl)-4-(hydroxymethyl) phenyl ester hydrogen fumarate. The molecular formula is C30H41NO7 and its molecular weight is 527.4. The structural formula is. The asterisk (*) indicates the chiral carbon. Fesoterodine fumarate is a white crystalline powder, which is freely soluble in water. Each Fesoterodine fumarate extended-release tablet contains either 4 mg or 8 mg of fesoterodine fumarate and the following inactive ingredients: FD&C Blue #2, fructose, glyceryl behenate, hypromellose, lactose anhydrous, lecithin soya, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide."
},
{
"NDCCode": "43598-281-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-281-30) ",
"NDC11Code": "43598-0281-30",
"ProductNDC": "43598-281",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230313",
"EndMarketingDate": "20250228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209623",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230313",
"EndMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoro methyl phenyl)-amide. Its molecular weight is 270.21, and the structural formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is soluble in N, N-Dimethyl formamide, sparingly soluble in acetone and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "43598-282-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-282-30) ",
"NDC11Code": "43598-0282-30",
"ProductNDC": "43598-282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230324",
"EndMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209623",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230324",
"EndMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoro methyl phenyl)-amide. Its molecular weight is 270.21, and the structural formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is soluble in N, N-Dimethyl formamide, sparingly soluble in acetone and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "43598-285-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (43598-285-30) ",
"NDC11Code": "43598-0285-30",
"ProductNDC": "43598-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208000",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221011",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride USP is a white to practically white powder. It is freely soluble in water and ethanol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride USP, equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: betacyclodextrin, black iron oxide, dehydrated alcohol, gelatin, iron oxide yellow, magnesium stearate, potassium hydroxide, propylene glycol, shellac, sodium lauryl sulphate, strong ammonia solution and titanium dioxide."
},
{
"NDCCode": "43598-303-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-303-30) ",
"NDC11Code": "43598-0303-30",
"ProductNDC": "43598-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121025",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090061",
"LabelerName": "Dr Reddys Laboratories Inc",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121025",
"SamplePackage": "N",
"Description": "Finasteride USP, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17β)-. The empirical formula of finasteride is C23H36N2O2 and its molecular weight is 372.55. Its structural formula is. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, docusate sodium, magnesium stearate, opadry blue (FD&C blue #2 aluminium lake, hypromellose, talc, titanium dioxide, yellow iron oxide). The botanical source of the Pregelatinized Starch is Maize."
},
{
"NDCCode": "43598-313-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-313-30) ",
"NDC11Code": "43598-0313-30",
"ProductNDC": "43598-313",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
},
{
"NDCCode": "43598-314-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-314-30) ",
"NDC11Code": "43598-0314-30",
"ProductNDC": "43598-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "5; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
},
{
"NDCCode": "43598-315-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-315-30) ",
"NDC11Code": "43598-0315-30",
"ProductNDC": "43598-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
},
{
"NDCCode": "43598-316-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-316-30) ",
"NDC11Code": "43598-0316-30",
"ProductNDC": "43598-316",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "5; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
},
{
"NDCCode": "43598-317-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-317-30) ",
"NDC11Code": "43598-0317-30",
"ProductNDC": "43598-317",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "2.5; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
},
{
"NDCCode": "43598-318-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (43598-318-30) ",
"NDC11Code": "43598-0318-30",
"ProductNDC": "43598-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203874",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140317",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.",
"Description": "Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43598-002-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-30) </PackageDescription>
<NDC11Code>43598-0002-30</NDC11Code>
<ProductNDC>43598-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-002-05</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-05) </PackageDescription>
<NDC11Code>43598-0002-05</NDC11Code>
<ProductNDC>43598-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-002-10</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-10) </PackageDescription>
<NDC11Code>43598-0002-10</NDC11Code>
<ProductNDC>43598-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-002-90</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-002-90) </PackageDescription>
<NDC11Code>43598-0002-90</NDC11Code>
<ProductNDC>43598-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-001-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43598-001-30) </PackageDescription>
<NDC11Code>43598-0001-30</NDC11Code>
<ProductNDC>43598-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules areindicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies(14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies(14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated as 1–[(1RS)-2-(Dimethylamino)-1-(4-Methoxy phenyl) ethyl] cyclohexanol hydrochloride and has the empirical formula of C17H28ClNO2. Its molecular weight is 313.9. The structural formula is shown as follows:. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol and water. Its partition coefficient is 0.1. Drug release is controlled by diffusion through the coating membrane on the Spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, ferric oxide red, gelatin, hypromellose, methyl alcohol, methylene chloride, microcrystalline cellulose, talc and titanium dioxide. In addition to the above 37.5mg consists of ferric oxide black and ferric oxide yellow. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are butyl alcohol, dehydrated alcohol, isopropyl alcohol, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. Dissolution Test specification differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-018-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-018-30)</PackageDescription>
<NDC11Code>43598-0018-30</NDC11Code>
<ProductNDC>43598-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Augmentin</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19901022</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050564</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<Description>AUGMENTIN is an oral antibacterial combination consisting of amoxicillin and the beta‑lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6‑aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta‑lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:. : 1 Tablets- Colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. Each tablet of AUGMENTIN contains 0.63 mEq potassium.</Description>
</NDC>
<NDC>
<NDCCode>43598-096-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-096-30) </PackageDescription>
<NDC11Code>43598-0096-30</NDC11Code>
<ProductNDC>43598-096</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Javygtor</ProprietaryName>
<NonProprietaryName>Sapropterin Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221003</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207685</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAPROPTERIN DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221003</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JAVYGTOR (sapropterin dihydrochloride) is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.</IndicationAndUsage>
<Description>JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as tablets contains 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base). Tablets are off-white to light yellow, mottled, round uncoated tablet debossed with ‘|’ on one side and plain on other side. Each tablet contains the following inactive ingredients: ascorbic acid, colloidal silicon dioxide, crospovidone, low substituted hydroxypropyl cellulose, mannitol, riboflavin and sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>43598-097-30</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (43598-097-30) / 1 POWDER, FOR SOLUTION in 1 PACKET (43598-097-11) </PackageDescription>
<NDC11Code>43598-0097-30</NDC11Code>
<ProductNDC>43598-097</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Javygtor</ProprietaryName>
<NonProprietaryName>Sapropterin Dihydrochloride</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209452</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAPROPTERIN DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JAVYGTOR (sapropterin dihydrochloride) is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.</IndicationAndUsage>
<Description>JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as powder for oral solution containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base) and 500 mg of sapropterin dihydrochloride (equivalent to 384 mg of sapropterin base). JAVYGTOR powder for oral solution is off white to pale yellow powder. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-121-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-121-30) </PackageDescription>
<NDC11Code>43598-0121-30</NDC11Code>
<ProductNDC>43598-121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091023</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, round, biconvex, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base or pink, oval, film-coated tablets containing 391.5 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, crospovidone, hydroxy propyl cellulose, lactose monohydrate, microcrystalline cellulose and sodium stearyl fumarate as inactive ingredients. The film-coating contains hypromellose 2910, iron oxide red, polyethylene glycol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-122-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-122-30) </PackageDescription>
<NDC11Code>43598-0122-30</NDC11Code>
<ProductNDC>43598-122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091023</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, round, biconvex, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent to 75 mg of clopidogrel base or pink, oval, film-coated tablets containing 391.5 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains colloidal silicon dioxide, crospovidone, hydroxy propyl cellulose, lactose monohydrate, microcrystalline cellulose and sodium stearyl fumarate as inactive ingredients. The film-coating contains hypromellose 2910, iron oxide red, polyethylene glycol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-151-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-151-30) </PackageDescription>
<NDC11Code>43598-0151-30</NDC11Code>
<ProductNDC>43598-151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag</ProprietaryName>
<NonProprietaryName>Eltrombopag</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219121</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.,</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag is a thrombopoietin receptor agonist indicated: 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1), 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first- line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3), 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3).</IndicationAndUsage>
<Description>Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid - 2-aminoethanol (1:2). It has the molecular formula C25H22N4O4 2(C2H7NO). The molecular weight is 564.65 grams/mol for eltrombopag olamine and 442.5 grams/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is red to brown crystalline solid, sparingly soluble in dimethylsulphoxide. Eltrombopag tablets contain eltrombopag olamine in the amount equivalent to 12.5 mg, 25 mg, 50 mg, or 75 mg of eltrombopag free acid. The inactive ingredients of eltrombopag tablets are:. Tablet Core: Colloidal silicon dioxide, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose, povidone, and sodium starch glycolate. Coating: iron oxide red, polyethylene glycol, polyvinyl alcohol, and talc. 12.5 mg, 25 mg and 75 mg tablets also contain ferrosoferric oxide and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>43598-160-01</NDCCode>
<PackageDescription>100 CUP, UNIT-DOSE in 1 PACKAGE (43598-160-01) > 30 mL in 1 CUP, UNIT-DOSE (43598-160-31) </PackageDescription>
<NDC11Code>43598-0160-01</NDC11Code>
<ProductNDC>43598-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213062</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>meq/30mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-160-53</NDCCode>
<PackageDescription>50 CUP, UNIT-DOSE in 1 PACKAGE (43598-160-53) > 30 mL in 1 CUP, UNIT-DOSE (43598-160-31) </PackageDescription>
<NDC11Code>43598-0160-53</NDC11Code>
<ProductNDC>43598-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213062</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>meq/30mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-162-30</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (43598-162-30) / 1 POWDER, FOR SOLUTION in 1 PACKET (43598-162-11) </PackageDescription>
<NDC11Code>43598-0162-30</NDC11Code>
<ProductNDC>43598-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Javygtor</ProprietaryName>
<NonProprietaryName>Sapropterin Dihydrochloride</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215798</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAPROPTERIN DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Phenylalanine Hydroxylase Activator [EPC], Phenylalanine Hydroxylase Activators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JAVYGTOR is indicated to reduce blood phenylalanine (Phe) levels in adult and pediatric patients one month of age and older with hyperphenylalaninemia (HPA) due to tetrahydrobiopterin-(BH4-) responsive Phenylketonuria (PKU). JAVYGTOR is to be used in conjunction with a Phe-restricted diet.</IndicationAndUsage>
<Description>JAVYGTOR (sapropterin dihydrochloride) is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in JAVYGTOR, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2- dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C9H15N5O3·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula. JAVYGTOR is supplied as powder for oral solution containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base) and 500 mg of sapropterin dihydrochloride (equivalent to 384 mg of sapropterin base). JAVYGTOR powder for oral solution is off- white to pale yellow powder. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-164-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-164-30) </PackageDescription>
<NDC11Code>43598-0164-30</NDC11Code>
<ProductNDC>43598-164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076255</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>43598-165-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-165-30) </PackageDescription>
<NDC11Code>43598-0165-30</NDC11Code>
<ProductNDC>43598-165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076255</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>43598-166-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-166-30) </PackageDescription>
<NDC11Code>43598-0166-30</NDC11Code>
<ProductNDC>43598-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076255</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. This product meets the requirements of USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>43598-218-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-218-30)</PackageDescription>
<NDC11Code>43598-0218-30</NDC11Code>
<ProductNDC>43598-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19901022</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050564</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<Description>Amoxicillin and Clavulanate Potassium is an oral antibacterial combination consisting of amoxicillin and the beta‑lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6‑aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta‑lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients: : 1 Tablets- Colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. Each tablet of amoxicillin/clavulanate potassium contains 0.63 mEq potassium.</Description>
</NDC>
<NDC>
<NDCCode>43598-247-30</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43598-247-30) </PackageDescription>
<NDC11Code>43598-0247-30</NDC11Code>
<ProductNDC>43598-247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fesoterodine Fumarate</ProprietaryName>
<NonProprietaryName>Fesoterodine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204975</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc.,</LabelerName>
<SubstanceName>FESOTERODINE FUMARATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fesoterodine fumarate extended-release tablets contains fesoterodine fumarate. Fesoterodine is rapidly de-esterified to its active metabolite (R)-2-(3-diisopropylamino-1-phenylpropyl)-4-hydroxymethyl-phenol, or 5-hydroxymethyl tolterodine, which is a muscarinic receptor antagonist. Chemically, fesoterodine fumarate is designated as isobutyric acid 2-((R)-3-diisopropylammonium-1-phenylpropyl)-4-(hydroxymethyl) phenyl ester hydrogen fumarate. The molecular formula is C30H41NO7 and its molecular weight is 527.4. The structural formula is. The asterisk (*) indicates the chiral carbon. Fesoterodine fumarate is a white crystalline powder, which is freely soluble in water. Each Fesoterodine fumarate extended-release tablet contains either 4 mg or 8 mg of fesoterodine fumarate and the following inactive ingredients: FD&C Blue #2, fructose, glyceryl behenate, hypromellose, lactose anhydrous, lecithin soya, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-248-30</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43598-248-30) </PackageDescription>
<NDC11Code>43598-0248-30</NDC11Code>
<ProductNDC>43598-248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fesoterodine Fumarate</ProprietaryName>
<NonProprietaryName>Fesoterodine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204975</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc.,</LabelerName>
<SubstanceName>FESOTERODINE FUMARATE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fesoterodine fumarate extended-release tablets contains fesoterodine fumarate. Fesoterodine is rapidly de-esterified to its active metabolite (R)-2-(3-diisopropylamino-1-phenylpropyl)-4-hydroxymethyl-phenol, or 5-hydroxymethyl tolterodine, which is a muscarinic receptor antagonist. Chemically, fesoterodine fumarate is designated as isobutyric acid 2-((R)-3-diisopropylammonium-1-phenylpropyl)-4-(hydroxymethyl) phenyl ester hydrogen fumarate. The molecular formula is C30H41NO7 and its molecular weight is 527.4. The structural formula is. The asterisk (*) indicates the chiral carbon. Fesoterodine fumarate is a white crystalline powder, which is freely soluble in water. Each Fesoterodine fumarate extended-release tablet contains either 4 mg or 8 mg of fesoterodine fumarate and the following inactive ingredients: FD&C Blue #2, fructose, glyceryl behenate, hypromellose, lactose anhydrous, lecithin soya, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-281-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-281-30) </PackageDescription>
<NDC11Code>43598-0281-30</NDC11Code>
<ProductNDC>43598-281</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230313</StartMarketingDate>
<EndMarketingDate>20250228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209623</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230313</StartMarketingDatePackage>
<EndMarketingDatePackage>20250228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoro methyl phenyl)-amide. Its molecular weight is 270.21, and the structural formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is soluble in N, N-Dimethyl formamide, sparingly soluble in acetone and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43598-282-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-282-30) </PackageDescription>
<NDC11Code>43598-0282-30</NDC11Code>
<ProductNDC>43598-282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230324</StartMarketingDate>
<EndMarketingDate>20240930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209623</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230324</StartMarketingDatePackage>
<EndMarketingDatePackage>20240930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoro methyl phenyl)-amide. Its molecular weight is 270.21, and the structural formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is soluble in N, N-Dimethyl formamide, sparingly soluble in acetone and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>43598-285-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (43598-285-30) </PackageDescription>
<NDC11Code>43598-0285-30</NDC11Code>
<ProductNDC>43598-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208000</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride USP is a white to practically white powder. It is freely soluble in water and ethanol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride USP, equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: betacyclodextrin, black iron oxide, dehydrated alcohol, gelatin, iron oxide yellow, magnesium stearate, potassium hydroxide, propylene glycol, shellac, sodium lauryl sulphate, strong ammonia solution and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-303-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-303-30) </PackageDescription>
<NDC11Code>43598-0303-30</NDC11Code>
<ProductNDC>43598-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121025</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090061</ApplicationNumber>
<LabelerName>Dr Reddys Laboratories Inc</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Finasteride USP, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17β)-. The empirical formula of finasteride is C23H36N2O2 and its molecular weight is 372.55. Its structural formula is. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, docusate sodium, magnesium stearate, opadry blue (FD&C blue #2 aluminium lake, hypromellose, talc, titanium dioxide, yellow iron oxide). The botanical source of the Pregelatinized Starch is Maize.</Description>
</NDC>
<NDC>
<NDCCode>43598-313-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-313-30) </PackageDescription>
<NDC11Code>43598-0313-30</NDC11Code>
<ProductNDC>43598-313</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>43598-314-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-314-30) </PackageDescription>
<NDC11Code>43598-0314-30</NDC11Code>
<ProductNDC>43598-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>5; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>43598-315-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-315-30) </PackageDescription>
<NDC11Code>43598-0315-30</NDC11Code>
<ProductNDC>43598-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>43598-316-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-316-30) </PackageDescription>
<NDC11Code>43598-0316-30</NDC11Code>
<ProductNDC>43598-316</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>5; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>43598-317-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-317-30) </PackageDescription>
<NDC11Code>43598-0317-30</NDC11Code>
<ProductNDC>43598-317</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>2.5; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>43598-318-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (43598-318-30) </PackageDescription>
<NDC11Code>43598-0318-30</NDC11Code>
<ProductNDC>43598-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203874</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate and atorvastatin calcium tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate. Amlodipine.</IndicationAndUsage>
<Description>Amlodipine besylate and atorvastatin calcium tablets combine the calcium channel blocker amlodipine besylate USP with the HMG CoA-reductase inhibitor atorvastatin calcium. The amlodipine besylate USP is chemically described as 3-ethyl-5-methyl (4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its molecular formula is C20H25ClN2O5C6H6O3S. The atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). Its molecular formula is C66H68CaF2N4O10. The structural formulae for amlodipine besylate USP and atorvastatin calcium are shown below. Amlodipine besylate and atorvastatin calcium contains amlodipine besylate USP, a white or almost white powder, and atorvastatin calcium, a white to off-white colored powder, free from visible extraneous matter. Amlodipine besylate USP has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1155.36. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in water and in 2-proponal. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Amlodipine besylate and atorvastatin calcium is available as film-coated tablets containing: 1 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 2 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 3 2.5 mg amlodipine equivalent to 3.468 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 5 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 6 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 7 5 mg amlodipine equivalent to 6.935 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 10 mg atorvastatin equivalent to 10.341 mg atorvastatin calcium., 9 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 20 mg atorvastatin equivalent to 20.683 mg atorvastatin calcium., 10 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 40 mg atorvastatin equivalent to 41.365 mg atorvastatin calcium., 11 10 mg amlodipine equivalent to 13.870 mg amlodipine besylate USP and 80 mg atorvastatin equivalent to 82.730 mg atorvastatin calcium.</Description>
</NDC>
</NDCList>