{
"NDC": [
{
"NDCCode": "43598-103-87",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43598-103-87) ",
"NDC11Code": "43598-0103-87",
"ProductNDC": "43598-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-103-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-103-05) ",
"NDC11Code": "43598-0103-05",
"ProductNDC": "43598-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-103-81",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (43598-103-81) / 10 TABLET in 1 BLISTER PACK (43598-103-10) ",
"NDC11Code": "43598-0103-81",
"ProductNDC": "43598-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-103-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (43598-103-90) ",
"NDC11Code": "43598-0103-90",
"ProductNDC": "43598-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240401",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-098-87",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43598-098-87) ",
"NDC11Code": "43598-0098-87",
"ProductNDC": "43598-098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-099-87",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43598-099-87) ",
"NDC11Code": "43598-0099-87",
"ProductNDC": "43598-099",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "43598-101-87",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43598-101-87) ",
"NDC11Code": "43598-0101-87",
"ProductNDC": "43598-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214659",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5."
},
{
"NDCCode": "55143-103-01",
"PackageDescription": "87 mL in 1 TUBE (55143-103-01)",
"NDC11Code": "55143-0103-01",
"ProductNDC": "55143-103",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Badger Spf 34 Anti-bug Sunscreen",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Norwood Packaging Ltd.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "20",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "71333-103-01",
"PackageDescription": "29.87 mL in 1 BOTTLE, SPRAY (71333-103-01) ",
"NDC11Code": "71333-0103-01",
"ProductNDC": "71333-103",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210308",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Suzhou Longlifu Health Food Co.,Ltd.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "g/112mL",
"Status": "Deprecated",
"LastUpdate": "2022-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210308",
"SamplePackage": "N"
},
{
"NDCCode": "78850-103-01",
"PackageDescription": "20 PACKAGE in 1 PACKET (78850-103-01) > 2.87 g in 1 PACKAGE",
"NDC11Code": "78850-0103-01",
"ProductNDC": "78850-103",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Abutol Antiseptic Wet Wipes",
"ProprietaryNameSuffix": "Citrus Garden",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200828",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "FULYA KOZMETIK ISLAK MENDIL IMALAT VE PAZARLAMA LIMITED SIRKETI",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200828",
"SamplePackage": "N",
"IndicationAndUsage": "hand wipes to decrease bacteria on the skin. recommended for repeated use. for use when soap and water are not available."
},
{
"NDCCode": "43598-643-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (43598-643-18) ",
"NDC11Code": "43598-0643-18",
"ProductNDC": "43598-643",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-643-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (43598-643-60) ",
"NDC11Code": "43598-0643-60",
"ProductNDC": "43598-643",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-644-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (43598-644-18) ",
"NDC11Code": "43598-0644-18",
"ProductNDC": "43598-644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-644-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (43598-644-60) ",
"NDC11Code": "43598-0644-60",
"ProductNDC": "43598-644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-645-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (43598-645-18) ",
"NDC11Code": "43598-0645-18",
"ProductNDC": "43598-645",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-645-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (43598-645-60) ",
"NDC11Code": "43598-0645-60",
"ProductNDC": "43598-645",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"ProprietaryNameSuffix": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213627",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze."
},
{
"NDCCode": "43598-283-35",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-283-35) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0283-35",
"ProductNDC": "43598-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170522",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-541-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-541-25) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0541-25",
"ProductNDC": "43598-541",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170522",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-682-35",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-682-35) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0682-35",
"ProductNDC": "43598-682",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180313",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-683-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-683-25) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0683-25",
"ProductNDC": "43598-683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180313",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "0781-7515-87",
"PackageDescription": "6 POUCH in 1 CARTON (0781-7515-87) / 5 AMPULE in 1 POUCH (0781-7515-14) / 2 mL in 1 AMPULE (0781-7515-72) ",
"NDC11Code": "00781-7515-87",
"ProductNDC": "0781-7515",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201966",
"LabelerName": "Sandoz Inc",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150724",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "0781-7516-87",
"PackageDescription": "6 POUCH in 1 CARTON (0781-7516-87) / 5 AMPULE in 1 POUCH (0781-7516-14) / 2 mL in 1 AMPULE (0781-7516-72) ",
"NDC11Code": "00781-7516-87",
"ProductNDC": "0781-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201966",
"LabelerName": "Sandoz Inc",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150724",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "0781-7517-87",
"PackageDescription": "6 POUCH in 1 CARTON (0781-7517-87) / 5 AMPULE in 1 POUCH (0781-7517-14) / 2 mL in 1 AMPULE (0781-7517-72) ",
"NDC11Code": "00781-7517-87",
"ProductNDC": "0781-7517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201966",
"LabelerName": "Sandoz Inc",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150724",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "11994-011-01",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (11994-011-01) / 1.5 mL in 1 VIAL, GLASS",
"NDC11Code": "11994-0011-01",
"ProductNDC": "11994-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Definity",
"NonProprietaryName": "Perflutren",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021064",
"LabelerName": "Lantheus Medical Imaging, Inc.",
"SubstanceName": "PERFLUTREN",
"StrengthNumber": "6.52",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010731",
"SamplePackage": "N",
"IndicationAndUsage": "DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.",
"Description": "DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below."
},
{
"NDCCode": "11994-011-04",
"PackageDescription": "4 VIAL, GLASS in 1 CARTON (11994-011-04) / 1.5 mL in 1 VIAL, GLASS",
"NDC11Code": "11994-0011-04",
"ProductNDC": "11994-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Definity",
"NonProprietaryName": "Perflutren",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021064",
"LabelerName": "Lantheus Medical Imaging, Inc.",
"SubstanceName": "PERFLUTREN",
"StrengthNumber": "6.52",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010731",
"SamplePackage": "N",
"IndicationAndUsage": "DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.",
"Description": "DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below."
},
{
"NDCCode": "11994-011-16",
"PackageDescription": "16 VIAL, GLASS in 1 CARTON (11994-011-16) / 1.5 mL in 1 VIAL, GLASS",
"NDC11Code": "11994-0011-16",
"ProductNDC": "11994-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Definity",
"NonProprietaryName": "Perflutren",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021064",
"LabelerName": "Lantheus Medical Imaging, Inc.",
"SubstanceName": "PERFLUTREN",
"StrengthNumber": "6.52",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010731",
"SamplePackage": "N",
"IndicationAndUsage": "DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.",
"Description": "DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below."
},
{
"NDCCode": "31722-103-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (31722-103-30) ",
"NDC11Code": "31722-0103-30",
"ProductNDC": "31722-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209403",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2020-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201007",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2) Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch."
},
{
"NDCCode": "31722-103-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (31722-103-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "31722-0103-31",
"ProductNDC": "31722-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209403",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2020-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201007",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2) Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch."
},
{
"NDCCode": "58151-103-77",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (58151-103-77) ",
"NDC11Code": "58151-0103-77",
"ProductNDC": "58151-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Detrol La",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240110",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021228",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240110",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see Clinical Studies (14)].",
"Description": "DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone."
},
{
"NDCCode": "58151-103-93",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (58151-103-93) ",
"NDC11Code": "58151-0103-93",
"ProductNDC": "58151-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Detrol La",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240110",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021228",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240110",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see Clinical Studies (14)].",
"Description": "DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43598-103-87</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43598-103-87) </PackageDescription>
<NDC11Code>43598-0103-87</NDC11Code>
<ProductNDC>43598-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-103-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-103-05) </PackageDescription>
<NDC11Code>43598-0103-05</NDC11Code>
<ProductNDC>43598-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-103-81</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (43598-103-81) / 10 TABLET in 1 BLISTER PACK (43598-103-10) </PackageDescription>
<NDC11Code>43598-0103-81</NDC11Code>
<ProductNDC>43598-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-103-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43598-103-90) </PackageDescription>
<NDC11Code>43598-0103-90</NDC11Code>
<ProductNDC>43598-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-098-87</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43598-098-87) </PackageDescription>
<NDC11Code>43598-0098-87</NDC11Code>
<ProductNDC>43598-098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-099-87</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43598-099-87) </PackageDescription>
<NDC11Code>43598-0099-87</NDC11Code>
<ProductNDC>43598-099</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>43598-101-87</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43598-101-87) </PackageDescription>
<NDC11Code>43598-0101-87</NDC11Code>
<ProductNDC>43598-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214659</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD , 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia. Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). , 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). , 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia Hypertriglyceridemia .</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C66H74CaF2N4O13and its molecular weight is 1209.408. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>55143-103-01</NDCCode>
<PackageDescription>87 mL in 1 TUBE (55143-103-01)</PackageDescription>
<NDC11Code>55143-0103-01</NDC11Code>
<ProductNDC>55143-103</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Badger Spf 34 Anti-bug Sunscreen</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Norwood Packaging Ltd.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71333-103-01</NDCCode>
<PackageDescription>29.87 mL in 1 BOTTLE, SPRAY (71333-103-01) </PackageDescription>
<NDC11Code>71333-0103-01</NDC11Code>
<ProductNDC>71333-103</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210308</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Suzhou Longlifu Health Food Co.,Ltd.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>g/112mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>78850-103-01</NDCCode>
<PackageDescription>20 PACKAGE in 1 PACKET (78850-103-01) > 2.87 g in 1 PACKAGE</PackageDescription>
<NDC11Code>78850-0103-01</NDC11Code>
<ProductNDC>78850-103</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Abutol Antiseptic Wet Wipes</ProprietaryName>
<ProprietaryNameSuffix>Citrus Garden</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>FULYA KOZMETIK ISLAK MENDIL IMALAT VE PAZARLAMA LIMITED SIRKETI</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>hand wipes to decrease bacteria on the skin. recommended for repeated use. for use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-643-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (43598-643-18) </PackageDescription>
<NDC11Code>43598-0643-18</NDC11Code>
<ProductNDC>43598-643</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-643-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (43598-643-60) </PackageDescription>
<NDC11Code>43598-0643-60</NDC11Code>
<ProductNDC>43598-643</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-644-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (43598-644-18) </PackageDescription>
<NDC11Code>43598-0644-18</NDC11Code>
<ProductNDC>43598-644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-644-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (43598-644-60) </PackageDescription>
<NDC11Code>43598-0644-60</NDC11Code>
<ProductNDC>43598-644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-645-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (43598-645-18) </PackageDescription>
<NDC11Code>43598-0645-18</NDC11Code>
<ProductNDC>43598-645</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-645-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (43598-645-60) </PackageDescription>
<NDC11Code>43598-0645-60</NDC11Code>
<ProductNDC>43598-645</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<ProprietaryNameSuffix>Sacubitril And Valsartan</ProprietaryNameSuffix>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213627</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C48H55N6O8Na3 2.5 H2O. Its molecular mass is 957.99 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43598-283-35</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-283-35) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0283-35</NDC11Code>
<ProductNDC>43598-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-541-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-541-25) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0541-25</NDC11Code>
<ProductNDC>43598-541</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-682-35</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-682-35) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0682-35</NDC11Code>
<ProductNDC>43598-682</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-683-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-683-25) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0683-25</NDC11Code>
<ProductNDC>43598-683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>0781-7515-87</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0781-7515-87) / 5 AMPULE in 1 POUCH (0781-7515-14) / 2 mL in 1 AMPULE (0781-7515-72) </PackageDescription>
<NDC11Code>00781-7515-87</NDC11Code>
<ProductNDC>0781-7515</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201966</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>0781-7516-87</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0781-7516-87) / 5 AMPULE in 1 POUCH (0781-7516-14) / 2 mL in 1 AMPULE (0781-7516-72) </PackageDescription>
<NDC11Code>00781-7516-87</NDC11Code>
<ProductNDC>0781-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201966</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>0781-7517-87</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0781-7517-87) / 5 AMPULE in 1 POUCH (0781-7517-14) / 2 mL in 1 AMPULE (0781-7517-72) </PackageDescription>
<NDC11Code>00781-7517-87</NDC11Code>
<ProductNDC>0781-7517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201966</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide inhalation suspension is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients: citric acid monohydrate, disodium edetate, polysorbate 80, sodium chloride, sodium citrate dihydrate and water for injection. Three dose strengths are available in single-dose ampules: 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>11994-011-01</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (11994-011-01) / 1.5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>11994-0011-01</NDC11Code>
<ProductNDC>11994-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Definity</ProprietaryName>
<NonProprietaryName>Perflutren</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010731</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021064</ApplicationNumber>
<LabelerName>Lantheus Medical Imaging, Inc.</LabelerName>
<SubstanceName>PERFLUTREN</SubstanceName>
<StrengthNumber>6.52</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.</IndicationAndUsage>
<Description>DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below.</Description>
</NDC>
<NDC>
<NDCCode>11994-011-04</NDCCode>
<PackageDescription>4 VIAL, GLASS in 1 CARTON (11994-011-04) / 1.5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>11994-0011-04</NDC11Code>
<ProductNDC>11994-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Definity</ProprietaryName>
<NonProprietaryName>Perflutren</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010731</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021064</ApplicationNumber>
<LabelerName>Lantheus Medical Imaging, Inc.</LabelerName>
<SubstanceName>PERFLUTREN</SubstanceName>
<StrengthNumber>6.52</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.</IndicationAndUsage>
<Description>DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below.</Description>
</NDC>
<NDC>
<NDCCode>11994-011-16</NDCCode>
<PackageDescription>16 VIAL, GLASS in 1 CARTON (11994-011-16) / 1.5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>11994-0011-16</NDC11Code>
<ProductNDC>11994-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Definity</ProprietaryName>
<NonProprietaryName>Perflutren</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010731</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021064</ApplicationNumber>
<LabelerName>Lantheus Medical Imaging, Inc.</LabelerName>
<SubstanceName>PERFLUTREN</SubstanceName>
<StrengthNumber>6.52</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Contrast Agent for Ultrasound Imaging [EPC], Ultrasound Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DEFINITY is indicated, after activation, for use in adult and pediatric patients with suboptimal echocardiograms to opacify the left ventricular chamber and to improve the delineation of the left ventricular endocardial border.</IndicationAndUsage>
<Description>DEFINITY (perflutren lipid microsphere) injectable suspension is, after activation an ultrasound contrast agent for intravenous use. The perflutren lipid microspheres are composed of perflutren encapsulated in an outer lipid shell consisting of (R) – hexadecanoic acid, 1-[(phosphonoxy)methyl]-1,2-ethanediyl ester, monosodium salt (abbreviated DPPA); (R) - 4-hydroxy-N,N,N-trimethyl-10-oxo-7-[(1-oxohexadecyl)oxy]-3,4,9-trioxa-4-phosphapentacosan-1-aminium, 4-oxide, inner salt (abbreviated DPPC); and (R)-∝-[6-hydroxy-6-oxido-9-[(1-oxohexadecyl)oxy]-5,7,11-trioxa-2-aza-6-phosphahexacos-1-yl]- ω-methoxypoly(ox-1,2-ethanediyl), monosodium salt; commonly called N-(methoxypolyethylene glycol 5000 carbamoyl)-1,2-dipalmitoyl-sn-glycero-3- phosphatidylethanolamine, monosodium salt (abbreviated MPEG5000 DPPE). Perflutren is chemically characterized as 1,1,1,2,2,3,3,3-octafluoropropane. It has a molecular weight of 188, empirical formula of C3F8 and has the following structural formula. DPPA has a molecular weight of 670, empirical formula of C35H68O8PNa, and following structural formula. DPPC has a molecular weight of 734, empirical formula of C40H80NO8P, and following structural formula. MPEG5000 DPPE has an approximate molecular weight of 5750 represented by empirical formula C265H527NO123PNa, contains <100ppm Ca2+ and Mg2+ and the following structural formula. Prior to activation, perflutren is in the headspace of the vial with a concentration of 6.52 mg/mL which is confirmed by positive IR spectroscopic testing in every vial. The lipid blend is in the clear, colorless, hypertonic, sterile liquid. Each mL of the liquid contains 0.75 mg lipid blend (consisting of 0.045 mg DPPA, 0.401 mg DPPC, and 0.304 mg MPEG5000 DPPE) and the following inactive ingredients: 103.5 mg propylene glycol, 126.2 mg glycerin, 2.34 mg sodium phosphate monobasic monohydrate, 2.16 mg sodium phosphate dibasic heptahydrate, and 4.87 mg sodium chloride in water for injection. The pH is 6.2 to 6.8. DEFINITY does not contain bacterial preservative. After activation with the aid of the VIALMIX or VIALMIX RFID, each mL of the activated DEFINITY as homogenous milky white suspension contains a maximum of 1.2 × 1010 perflutren lipid microspheres, and about 150 microL/mL (1.1 mg/mL) perflutren. The microsphere particle size parameters are listed in Table 2 below.</Description>
</NDC>
<NDC>
<NDCCode>31722-103-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-103-30) </PackageDescription>
<NDC11Code>31722-0103-30</NDC11Code>
<ProductNDC>31722-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209403</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2) Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
</NDC>
<NDC>
<NDCCode>31722-103-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (31722-103-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>31722-0103-31</NDC11Code>
<ProductNDC>31722-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209403</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2) Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
</NDC>
<NDC>
<NDCCode>58151-103-77</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (58151-103-77) </PackageDescription>
<NDC11Code>58151-0103-77</NDC11Code>
<ProductNDC>58151-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Detrol La</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240110</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021228</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240110</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see Clinical Studies (14)].</IndicationAndUsage>
<Description>DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>58151-103-93</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (58151-103-93) </PackageDescription>
<NDC11Code>58151-0103-93</NDC11Code>
<ProductNDC>58151-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Detrol La</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240110</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021228</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240110</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see Clinical Studies (14)].</IndicationAndUsage>
<Description>DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone.</Description>
</NDC>
</NDCList>