{
"NDC": [
{
"NDCCode": "43598-295-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-295-66) / 10 CAPSULE in 1 BLISTER PACK (43598-295-79) ",
"NDC11Code": "43598-0295-66",
"ProductNDC": "43598-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "63323-295-66",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-295-66) / 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0295-66",
"ProductNDC": "63323-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010717",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "43598-295-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (43598-295-05) ",
"NDC11Code": "43598-0295-05",
"ProductNDC": "43598-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-295-78",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (43598-295-78) / 10 CAPSULE in 1 BLISTER PACK (43598-295-79) ",
"NDC11Code": "43598-0295-78",
"ProductNDC": "43598-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-295-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (43598-295-90) ",
"NDC11Code": "43598-0295-90",
"ProductNDC": "43598-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-291-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-291-66) / 10 CAPSULE in 1 BLISTER PACK (43598-291-79) ",
"NDC11Code": "43598-0291-66",
"ProductNDC": "43598-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-292-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-292-66) / 10 CAPSULE in 1 BLISTER PACK (43598-292-79) ",
"NDC11Code": "43598-0292-66",
"ProductNDC": "43598-292",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-293-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-293-66) / 10 CAPSULE in 1 BLISTER PACK (43598-293-79) ",
"NDC11Code": "43598-0293-66",
"ProductNDC": "43598-293",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-294-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-294-66) / 10 CAPSULE in 1 BLISTER PACK (43598-294-79) ",
"NDC11Code": "43598-0294-66",
"ProductNDC": "43598-294",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-296-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-296-66) / 10 CAPSULE in 1 BLISTER PACK (43598-296-79) ",
"NDC11Code": "43598-0296-66",
"ProductNDC": "43598-296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-297-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-297-66) / 10 CAPSULE in 1 BLISTER PACK (43598-297-79) ",
"NDC11Code": "43598-0297-66",
"ProductNDC": "43598-297",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "225",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-298-66",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (43598-298-66) / 10 CAPSULE in 1 BLISTER PACK (43598-298-79) ",
"NDC11Code": "43598-0298-66",
"ProductNDC": "43598-298",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209664",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac."
},
{
"NDCCode": "43598-045-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-045-28) > 7 CAPSULE in 1 BLISTER PACK (43598-045-70) ",
"NDC11Code": "43598-0045-28",
"ProductNDC": "43598-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-045-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-045-63) ",
"NDC11Code": "43598-0045-63",
"ProductNDC": "43598-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-046-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-046-28) > 7 CAPSULE in 1 BLISTER PACK (43598-046-70) ",
"NDC11Code": "43598-0046-28",
"ProductNDC": "43598-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-046-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-046-63) ",
"NDC11Code": "43598-0046-63",
"ProductNDC": "43598-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-047-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-047-28) > 7 CAPSULE in 1 BLISTER PACK (43598-047-70) ",
"NDC11Code": "43598-0047-28",
"ProductNDC": "43598-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-047-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-047-63) ",
"NDC11Code": "43598-0047-63",
"ProductNDC": "43598-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-048-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-048-28) > 7 CAPSULE in 1 BLISTER PACK (43598-048-70) ",
"NDC11Code": "43598-0048-28",
"ProductNDC": "43598-048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-048-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-048-63) ",
"NDC11Code": "43598-0048-63",
"ProductNDC": "43598-048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-367-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-367-05) ",
"NDC11Code": "43598-0367-05",
"ProductNDC": "43598-367",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-367-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-367-30) ",
"NDC11Code": "43598-0367-30",
"ProductNDC": "43598-367",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-368-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-368-05) ",
"NDC11Code": "43598-0368-05",
"ProductNDC": "43598-368",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-368-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-368-30) ",
"NDC11Code": "43598-0368-30",
"ProductNDC": "43598-368",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-369-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43598-369-05) ",
"NDC11Code": "43598-0369-05",
"ProductNDC": "43598-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20251231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20251231",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-369-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43598-369-30) ",
"NDC11Code": "43598-0369-30",
"ProductNDC": "43598-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cinacalcet",
"NonProprietaryName": "Cinacalcet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200918",
"EndMarketingDate": "20251231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208368",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "CINACALCET HYDROCHLORIDE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200918",
"EndMarketingDatePackage": "20251231",
"SamplePackage": "N",
"IndicationAndUsage": "Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).",
"Description": "Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "43598-624-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (43598-624-30) ",
"NDC11Code": "43598-0624-30",
"ProductNDC": "43598-624",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine And Topiramate Extended-release",
"NonProprietaryName": "Phentermine And Topiramate Extended-release",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208175",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE; TOPIRAMATE",
"StrengthNumber": "3.75; 23",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1."
},
{
"NDCCode": "43598-625-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (43598-625-30) ",
"NDC11Code": "43598-0625-30",
"ProductNDC": "43598-625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine And Topiramate Extended-release",
"NonProprietaryName": "Phentermine And Topiramate Extended-release",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208175",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE; TOPIRAMATE",
"StrengthNumber": "7.5; 46",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1."
},
{
"NDCCode": "43598-626-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (43598-626-30) ",
"NDC11Code": "43598-0626-30",
"ProductNDC": "43598-626",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine And Topiramate Extended-release",
"NonProprietaryName": "Phentermine And Topiramate Extended-release",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208175",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE; TOPIRAMATE",
"StrengthNumber": "11.25; 69",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1."
},
{
"NDCCode": "43598-627-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (43598-627-30) ",
"NDC11Code": "43598-0627-30",
"ProductNDC": "43598-627",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine And Topiramate Extended-release",
"NonProprietaryName": "Phentermine And Topiramate Extended-release",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208175",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE; TOPIRAMATE",
"StrengthNumber": "15; 92",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43598-295-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-295-66) / 10 CAPSULE in 1 BLISTER PACK (43598-295-79) </PackageDescription>
<NDC11Code>43598-0295-66</NDC11Code>
<ProductNDC>43598-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>63323-295-66</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-295-66) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0295-66</NDC11Code>
<ProductNDC>63323-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>43598-295-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (43598-295-05) </PackageDescription>
<NDC11Code>43598-0295-05</NDC11Code>
<ProductNDC>43598-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-295-78</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (43598-295-78) / 10 CAPSULE in 1 BLISTER PACK (43598-295-79) </PackageDescription>
<NDC11Code>43598-0295-78</NDC11Code>
<ProductNDC>43598-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-295-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (43598-295-90) </PackageDescription>
<NDC11Code>43598-0295-90</NDC11Code>
<ProductNDC>43598-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-291-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-291-66) / 10 CAPSULE in 1 BLISTER PACK (43598-291-79) </PackageDescription>
<NDC11Code>43598-0291-66</NDC11Code>
<ProductNDC>43598-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-292-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-292-66) / 10 CAPSULE in 1 BLISTER PACK (43598-292-79) </PackageDescription>
<NDC11Code>43598-0292-66</NDC11Code>
<ProductNDC>43598-292</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-293-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-293-66) / 10 CAPSULE in 1 BLISTER PACK (43598-293-79) </PackageDescription>
<NDC11Code>43598-0293-66</NDC11Code>
<ProductNDC>43598-293</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-294-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-294-66) / 10 CAPSULE in 1 BLISTER PACK (43598-294-79) </PackageDescription>
<NDC11Code>43598-0294-66</NDC11Code>
<ProductNDC>43598-294</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-296-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-296-66) / 10 CAPSULE in 1 BLISTER PACK (43598-296-79) </PackageDescription>
<NDC11Code>43598-0296-66</NDC11Code>
<ProductNDC>43598-296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-297-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-297-66) / 10 CAPSULE in 1 BLISTER PACK (43598-297-79) </PackageDescription>
<NDC11Code>43598-0297-66</NDC11Code>
<ProductNDC>43598-297</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>225</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-298-66</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (43598-298-66) / 10 CAPSULE in 1 BLISTER PACK (43598-298-79) </PackageDescription>
<NDC11Code>43598-0298-66</NDC11Code>
<ProductNDC>43598-298</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209664</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for:. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 Month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin, USP is. Pregabalin, USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (octanol/ buffer) at pH 7.2 is -1.27. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with lactose monohydrate, maize starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the red capsule shells contain red iron oxide.The imprinting ink contains black iron oxide, propylene glycol, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43598-045-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-045-28) > 7 CAPSULE in 1 BLISTER PACK (43598-045-70) </PackageDescription>
<NDC11Code>43598-0045-28</NDC11Code>
<ProductNDC>43598-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-045-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-045-63) </PackageDescription>
<NDC11Code>43598-0045-63</NDC11Code>
<ProductNDC>43598-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-046-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-046-28) > 7 CAPSULE in 1 BLISTER PACK (43598-046-70) </PackageDescription>
<NDC11Code>43598-0046-28</NDC11Code>
<ProductNDC>43598-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-046-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-046-63) </PackageDescription>
<NDC11Code>43598-0046-63</NDC11Code>
<ProductNDC>43598-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-047-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-047-28) > 7 CAPSULE in 1 BLISTER PACK (43598-047-70) </PackageDescription>
<NDC11Code>43598-0047-28</NDC11Code>
<ProductNDC>43598-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-047-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-047-63) </PackageDescription>
<NDC11Code>43598-0047-63</NDC11Code>
<ProductNDC>43598-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-048-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-048-28) > 7 CAPSULE in 1 BLISTER PACK (43598-048-70) </PackageDescription>
<NDC11Code>43598-0048-28</NDC11Code>
<ProductNDC>43598-048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-048-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-048-63) </PackageDescription>
<NDC11Code>43598-0048-63</NDC11Code>
<ProductNDC>43598-048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-367-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-367-05) </PackageDescription>
<NDC11Code>43598-0367-05</NDC11Code>
<ProductNDC>43598-367</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-367-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-367-30) </PackageDescription>
<NDC11Code>43598-0367-30</NDC11Code>
<ProductNDC>43598-367</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-368-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-368-05) </PackageDescription>
<NDC11Code>43598-0368-05</NDC11Code>
<ProductNDC>43598-368</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-368-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-368-30) </PackageDescription>
<NDC11Code>43598-0368-30</NDC11Code>
<ProductNDC>43598-368</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-369-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43598-369-05) </PackageDescription>
<NDC11Code>43598-0369-05</NDC11Code>
<ProductNDC>43598-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20251231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20251231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-369-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43598-369-30) </PackageDescription>
<NDC11Code>43598-0369-30</NDC11Code>
<ProductNDC>43598-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cinacalcet</ProprietaryName>
<NonProprietaryName>Cinacalcet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200918</StartMarketingDate>
<EndMarketingDate>20251231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208368</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200918</StartMarketingDatePackage>
<EndMarketingDatePackage>20251231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cinacalcet tablet is a positive modulator of the calcium sensing receptor indicated for:. Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1). Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis. Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2). Hypercalcemia in adult patients with primary HPT for whom parathyroidectomy would be indicated on the basis of serum calcium levels, but who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
<Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients. The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>43598-624-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (43598-624-30) </PackageDescription>
<NDC11Code>43598-0624-30</NDC11Code>
<ProductNDC>43598-624</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine And Topiramate Extended-release</ProprietaryName>
<NonProprietaryName>Phentermine And Topiramate Extended-release</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208175</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE; TOPIRAMATE</SubstanceName>
<StrengthNumber>3.75; 23</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1.</Description>
</NDC>
<NDC>
<NDCCode>43598-625-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (43598-625-30) </PackageDescription>
<NDC11Code>43598-0625-30</NDC11Code>
<ProductNDC>43598-625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine And Topiramate Extended-release</ProprietaryName>
<NonProprietaryName>Phentermine And Topiramate Extended-release</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208175</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE; TOPIRAMATE</SubstanceName>
<StrengthNumber>7.5; 46</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1.</Description>
</NDC>
<NDC>
<NDCCode>43598-626-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (43598-626-30) </PackageDescription>
<NDC11Code>43598-0626-30</NDC11Code>
<ProductNDC>43598-626</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine And Topiramate Extended-release</ProprietaryName>
<NonProprietaryName>Phentermine And Topiramate Extended-release</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208175</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE; TOPIRAMATE</SubstanceName>
<StrengthNumber>11.25; 69</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1.</Description>
</NDC>
<NDC>
<NDCCode>43598-627-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (43598-627-30) </PackageDescription>
<NDC11Code>43598-0627-30</NDC11Code>
<ProductNDC>43598-627</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine And Topiramate Extended-release</ProprietaryName>
<NonProprietaryName>Phentermine And Topiramate Extended-release</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208175</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE; TOPIRAMATE</SubstanceName>
<StrengthNumber>15; 92</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine and topiramate extended-release capsules are indicated in combination with a reduced-calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adult patients with obesity, 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>Phentermine and topiramate extended-release capsules are comprised of immediate-release phentermine hydrochloride, USP (expressed as the weight of the free base) and extended-release topiramate, USP. Phentermine and topiramate extended-release capsules contain phentermine hydrochloride, USP, a sympathomimetic amine anorectic, and topiramate, USP, a sulfamate-substituted monosaccharide. Phentermine Hydrochloride, USP. The chemical name of phentermine hydrochloride, USP is α,α-dimethylphenethylamine hydrochloride. The molecular formula is C10H16ClN and its molecular weight is 185.69 g mol-1 (hydrochloride salt) or 149.2 (free base). Phentermine hydrochloride, USP is a white, odourless, hygroscopic, crystalline powder that is soluble in water and lower alcohols. It is also slightly soluble in chloroform and insoluble in ether. Its structural formula is. Topiramate, USP. Topiramate, USP is 2,3:4,5-di-O-isopropylidene-β-D-fructopyranose sulfamate. The molecular formula is C12H21NO8S and its molecular weight is 339.36.Topiramate, USP is a white to off-white powder. It is freely soluble in dichloromethane. Its structural formula is. Phentermine and Topiramate Extended-Release Capsules. Phentermine and topiramate extended-release capsules are for oral administration and available in four dosage strengths:. 3.75 mg/23 mg (phentermine 3.75 mg and topiramate USP, 23 mg) (equivalent to 4.665 mg of Phentermine Hydrochloride, USP). 7.5 mg/46 mg (phentermine 7.5 mg and topiramate USP, 46 mg) (equivalent to 9.33 mg of Phentermine Hydrochloride, USP). 11.25 mg/69 mg (phentermine 11.25 mg and topiramate USP, 69 mg) (equivalent to 14 mg of Phentermine Hydrochloride, USP). 15 mg/92 mg (phentermine 15 mg and topiramate USP, 92 mg) (equivalent to 18.66 mg of Phentermine Hydrochloride, USP). Each capsule contains the following inactive ingredients: ethocel, gelatin, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, talc and titanium dioxide. In addition, the 7.5 mg/46 mg contains FD&C Red No. 40 and FD&C Yellow #6, 11.25 mg/69 mg contains FD&C Yellow #5 and FD&C Blue #1, 15 mg/92 mg contains FD&C Yellow #6 and D&C Red #28. The imprinting ink opacode Black contains shellac, iron oxide black, propylene glycol, FD&C Blue #2, FD&C Red No. 40, D&C Yellow #10, FD&C Blue #1.</Description>
</NDC>
</NDCList>