{
"NDC": [
{
"NDCCode": "43598-405-16",
"PackageDescription": "25 AMPULE in 1 CARTON (43598-405-16) > 1 mL in 1 AMPULE (43598-405-11) ",
"NDC11Code": "43598-0405-16",
"ProductNDC": "43598-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phytonadione",
"ProprietaryNameSuffix": "Phytonadione",
"NonProprietaryName": "Phytonadione",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207719",
"LabelerName": "Dr.Reddy's Laboratories Inc",
"SubstanceName": "PHYTONADIONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190531",
"SamplePackage": "N",
"IndicationAndUsage": "Phytonadione injectable emulsion, USP is indicated in the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by Vitamin K deficiency or interference with Vitamin K activity. Phytonadione injectable emulsion is indicated in : 1 anticoagulant-induced prothrombin deficiency caused by coumarin or indanedione derivatives;, 2 prophylaxis and therapy of hemorrhagic disease of the newborn;, 3 hypoprothrombinemia due to antibacterial therapy; , 4 hypoprothrombinemia secondary to factors limiting absorption or synthesis of Vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis;, 5 other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with phytonadione injectable emulsion metabolism, e.g., salicylates.",
"Description": "Phytonadione is a vitamin, which is a clear, yellow to amber, viscous, odorless or nearly odorlessliquid. It is insoluble in water, soluble in chloroform and slightly soluble in ethanol. It has a molecular weight of 450.70.Phytonadione is 2-methyl-3-phytyl-1, 4-naphthoquinone. Its empirical formula is C31H46O2 and its structural formula is. Phytonadione injectable emulsion, USP is a yellow, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Each milliliter contains phytonadione 10 mg, polyoxyethylated fatty acid derivative 70 mg, dextrose, hydrous 37.5 mg in water for injection; benzyl alcohol 9 mg added as preservative. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive."
},
{
"NDCCode": "11673-405-16",
"PackageDescription": "2 TUBE in 1 CARTON (11673-405-16) / 28 g in 1 TUBE",
"NDC11Code": "11673-0405-16",
"ProductNDC": "11673-405",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Up And Up Antibiotic",
"NonProprietaryName": "Bacitracin Zinc, Neomycin, Polymyxin B",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140608",
"EndMarketingDate": "20250630",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "Target Corporation",
"SubstanceName": "BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 3.5; 5000",
"StrengthUnit": "[USP'U]/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191022",
"EndMarketingDatePackage": "20250630",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "37205-405-16",
"PackageDescription": "1 TUBE in 1 CARTON (37205-405-16) > 56 g in 1 TUBE",
"NDC11Code": "37205-0405-16",
"ProductNDC": "37205-405",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Hemorrhoidal",
"NonProprietaryName": "Mineral Oil, Petrolatum, Phenylephrine Hcl, Shark Liver Oil",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120501",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part346",
"LabelerName": "CARDINAL HEALTH",
"SubstanceName": "MINERAL OIL; PETROLATUM; PHENYLEPHRINE HYDROCHLORIDE; SHARK LIVER OIL",
"StrengthNumber": "140; 719; 2.5; 30",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Directions: 1 children under 12 years of age: ask a doctor , 2 adults: when practical, cleanse the affected area by patting or blotting with an appropriate cleansing wipe , 3 gently dry by patting or blotting with a tissue or a soft cloth before applying , 4 when first opening tube, remove foil seal , 5 for intrarectal use: remove protective cover form applicator and attach to tube , 6 lubricate applicator well, then gently insert applicator into the rectum , 7 thoroughly clean applicator and replace protective cover after each use , 8 apply externally to the affected area up to 4 times daily, especially at night, in the morning or after each bowel movement , 9 also apply ointment to external area."
},
{
"NDCCode": "43913-405-16",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (43913-405-16)",
"NDC11Code": "43913-0405-16",
"ProductNDC": "43913-405",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "G-con-x",
"NonProprietaryName": "Dexbrompheniramine Maleate And Pseudoephedrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20140211",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "McLaren Medical",
"SubstanceName": "DEXBROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "1; 30",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the temporary relief of nasal congestion due to the common cold, hay fever or other upper respiratory allergies (allergic rhinitis). Helps decongest sinus openings and passages; temporarily relieves sinus congestion and pressure. For the temporary relief of runny nose, sneezing, itching of the nose or throat and itchy, watery eyes due to hay fever or other respiratory allergies."
},
{
"NDCCode": "50991-405-16",
"PackageDescription": "473 mL in 1 BOTTLE (50991-405-16)",
"NDC11Code": "50991-0405-16",
"ProductNDC": "50991-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Poly Hist",
"ProprietaryNameSuffix": "Pd",
"NonProprietaryName": "Pyrilamine Maleate, Chlorpheniramine Maleate, And Phenylephrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20040805",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Poly Pharmaceuticals, Inc.",
"SubstanceName": "PYRILAMINE MALEATE; CHLORPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "12.5; 2; 7.5",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC],alpha-1 Adrenergic Agonist [EPC],Adrenergic alpha1-Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-08-29"
},
{
"NDCCode": "82393-405-16",
"PackageDescription": "20 kg in 1 DRUM (82393-405-16) ",
"NDC11Code": "82393-0405-16",
"ProductNDC": "82393-405",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Naltrexone Hcl (anhydrous)",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240301",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Pharma Source Direct, Inc.",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-07-04",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "01-MAR-24"
},
{
"NDCCode": "83745-405-16",
"PackageDescription": "473 mL in 1 BOTTLE (83745-405-16) ",
"NDC11Code": "83745-0405-16",
"ProductNDC": "83745-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactulose",
"NonProprietaryName": "Lactulose",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20241220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207786",
"LabelerName": "APOZEAL PHARMACEUTICALS INC",
"SubstanceName": "LACTULOSE",
"StrengthNumber": "10",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241220",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.",
"Description": "Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of lactulose solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C12H22O11. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water."
},
{
"NDCCode": "43598-130-74",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (43598-130-74) / 16 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "43598-0130-74",
"ProductNDC": "43598-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "1",
"StrengthUnit": "g/16mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220324",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8."
},
{
"NDCCode": "43598-484-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-484-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0484-16",
"ProductNDC": "43598-484",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20200911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212983",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200911",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-485-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-485-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0485-16",
"ProductNDC": "43598-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20200911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212983",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200911",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-486-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-486-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0486-16",
"ProductNDC": "43598-486",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20200609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212796",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200609",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-487-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-487-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0487-16",
"ProductNDC": "43598-487",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20200609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212796",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200609",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-488-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-488-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0488-16",
"ProductNDC": "43598-488",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20201001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213233",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201001",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-489-16",
"PackageDescription": "6 BOTTLE in 1 CARTON (43598-489-16) / 27 LOZENGE in 1 BOTTLE",
"NDC11Code": "43598-0489-16",
"ProductNDC": "43598-489",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Polacrilex",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20201001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213233",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "NICOTINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201001",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "43598-891-10",
"PackageDescription": "100 CUP, UNIT-DOSE in 1 PACKAGE (43598-891-10) > 15 mL in 1 CUP, UNIT-DOSE (43598-891-16) ",
"NDC11Code": "43598-0891-10",
"ProductNDC": "43598-891",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213062",
"LabelerName": "Dr. Reddy�s Laboratories, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "meq/15mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose."
},
{
"NDCCode": "43598-891-52",
"PackageDescription": "50 CUP, UNIT-DOSE in 1 PACKAGE (43598-891-52) > 15 mL in 1 CUP, UNIT-DOSE (43598-891-16) ",
"NDC11Code": "43598-0891-52",
"ProductNDC": "43598-891",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213062",
"LabelerName": "Dr. Reddy�s Laboratories, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "meq/15mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose."
},
{
"NDCCode": "43598-747-11",
"PackageDescription": "1 BOTTLE in 1 CARTON (43598-747-11) / 5 mL in 1 BOTTLE",
"NDC11Code": "43598-0747-11",
"ProductNDC": "43598-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate Ophthalmic Gel Forming Solution 0.25%",
"NonProprietaryName": "Timolol Maleate Ophthalmic Gel Forming Solution 0.25%",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215733",
"LabelerName": "Dr. Reddy's Laboratories, Inc.",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol maleate ophthalmic gel forming solution is indicated in the treatment of elevatedintraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol maleate ophthalmic gel forming solution is a non-selective beta adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4 morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. 25°. [α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate, USP has a molecular weight of 432.49. It is a white to practically white powder, which is soluble in water, methanol, and ethanol. Timolol maleate ophthalmic gel forming solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is 6.5 to 7.5, and the osmolality is 260-330 mOsmol/kg. Each mL of timolol maleate ophthalmic gel forming solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate USP). Each mL of timolol maleate ophthalmic gel forming solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate USP). Inactive ingredients: gellan gum, tromethamine, mannitol and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, timolol maleate ophthalmic gel forming solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "43598-748-11",
"PackageDescription": "1 BOTTLE in 1 CARTON (43598-748-11) / 5 mL in 1 BOTTLE",
"NDC11Code": "43598-0748-11",
"ProductNDC": "43598-748",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate Ophthalmic Gel Forming Solution 0.5%",
"NonProprietaryName": "Timolol Maleate Ophthalmic Gel Forming Solution 0.5%",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20221115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215733",
"LabelerName": "Dr. Reddy's Laboratories, Inc.",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221115",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol maleate ophthalmic gel forming solution is indicated in the treatment of elevatedintraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol maleate ophthalmic gel forming solution is a non-selective beta adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4 morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. 25°. [α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate, USP has a molecular weight of 432.49. It is a white to practically white powder, which is soluble in water, methanol, and ethanol. Timolol maleate ophthalmic gel forming solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is 6.5 to 7.5, and the osmolality is 260-330 mOsmol/kg. Each mL of timolol maleate ophthalmic gel forming solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate USP). Each mL of timolol maleate ophthalmic gel forming solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate USP). Inactive ingredients: gellan gum, tromethamine, mannitol and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, timolol maleate ophthalmic gel forming solution forms a gel that is subsequently removed by the flow of tears."
},
{
"NDCCode": "43598-045-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-045-28) > 7 CAPSULE in 1 BLISTER PACK (43598-045-70) ",
"NDC11Code": "43598-0045-28",
"ProductNDC": "43598-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-045-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-045-63) ",
"NDC11Code": "43598-0045-63",
"ProductNDC": "43598-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-046-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-046-28) > 7 CAPSULE in 1 BLISTER PACK (43598-046-70) ",
"NDC11Code": "43598-0046-28",
"ProductNDC": "43598-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-046-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-046-63) ",
"NDC11Code": "43598-0046-63",
"ProductNDC": "43598-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-047-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-047-28) > 7 CAPSULE in 1 BLISTER PACK (43598-047-70) ",
"NDC11Code": "43598-0047-28",
"ProductNDC": "43598-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-047-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-047-63) ",
"NDC11Code": "43598-0047-63",
"ProductNDC": "43598-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-048-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (43598-048-28) > 7 CAPSULE in 1 BLISTER PACK (43598-048-70) ",
"NDC11Code": "43598-0048-28",
"ProductNDC": "43598-048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-048-63",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (43598-048-63) ",
"NDC11Code": "43598-0048-63",
"ProductNDC": "43598-048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunitinib Malate",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215843",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221130",
"SamplePackage": "N",
"Description": "Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "43598-114-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 POUCH (43598-114-10) ",
"NDC11Code": "43598-0114-10",
"ProductNDC": "43598-114",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"StartMarketingDate": "20230913",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN",
"StrengthNumber": "30; 600",
"StrengthUnit": "mg/1; mg/1",
"Status": "Unfinished",
"LastUpdate": "2023-09-16",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-SEP-23"
},
{
"NDCCode": "43598-115-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 POUCH (43598-115-10) ",
"NDC11Code": "43598-0115-10",
"ProductNDC": "43598-115",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Guaifenesin And Dextromethorphan Hbr",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"StartMarketingDate": "20230913",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN",
"StrengthNumber": "60; 1200",
"StrengthUnit": "mg/1; mg/1",
"Status": "Unfinished",
"LastUpdate": "2023-09-16",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "13-SEP-23"
},
{
"NDCCode": "43598-127-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (43598-127-25) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-127-45) ",
"NDC11Code": "43598-0127-25",
"ProductNDC": "43598-127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220324",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8."
},
{
"NDCCode": "43598-128-11",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (43598-128-11) / 8 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "43598-0128-11",
"ProductNDC": "43598-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/8mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220324",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43598-405-16</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (43598-405-16) > 1 mL in 1 AMPULE (43598-405-11) </PackageDescription>
<NDC11Code>43598-0405-16</NDC11Code>
<ProductNDC>43598-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phytonadione</ProprietaryName>
<ProprietaryNameSuffix>Phytonadione</ProprietaryNameSuffix>
<NonProprietaryName>Phytonadione</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207719</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
<SubstanceName>PHYTONADIONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phytonadione injectable emulsion, USP is indicated in the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by Vitamin K deficiency or interference with Vitamin K activity. Phytonadione injectable emulsion is indicated in : 1 anticoagulant-induced prothrombin deficiency caused by coumarin or indanedione derivatives;, 2 prophylaxis and therapy of hemorrhagic disease of the newborn;, 3 hypoprothrombinemia due to antibacterial therapy; , 4 hypoprothrombinemia secondary to factors limiting absorption or synthesis of Vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis;, 5 other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with phytonadione injectable emulsion metabolism, e.g., salicylates.</IndicationAndUsage>
<Description>Phytonadione is a vitamin, which is a clear, yellow to amber, viscous, odorless or nearly odorlessliquid. It is insoluble in water, soluble in chloroform and slightly soluble in ethanol. It has a molecular weight of 450.70.Phytonadione is 2-methyl-3-phytyl-1, 4-naphthoquinone. Its empirical formula is C31H46O2 and its structural formula is. Phytonadione injectable emulsion, USP is a yellow, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Each milliliter contains phytonadione 10 mg, polyoxyethylated fatty acid derivative 70 mg, dextrose, hydrous 37.5 mg in water for injection; benzyl alcohol 9 mg added as preservative. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive.</Description>
</NDC>
<NDC>
<NDCCode>11673-405-16</NDCCode>
<PackageDescription>2 TUBE in 1 CARTON (11673-405-16) / 28 g in 1 TUBE</PackageDescription>
<NDC11Code>11673-0405-16</NDC11Code>
<ProductNDC>11673-405</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Up And Up Antibiotic</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc, Neomycin, Polymyxin B</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140608</StartMarketingDate>
<EndMarketingDate>20250630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 3.5; 5000</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191022</StartMarketingDatePackage>
<EndMarketingDatePackage>20250630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37205-405-16</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (37205-405-16) > 56 g in 1 TUBE</PackageDescription>
<NDC11Code>37205-0405-16</NDC11Code>
<ProductNDC>37205-405</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Hemorrhoidal</ProprietaryName>
<NonProprietaryName>Mineral Oil, Petrolatum, Phenylephrine Hcl, Shark Liver Oil</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part346</ApplicationNumber>
<LabelerName>CARDINAL HEALTH</LabelerName>
<SubstanceName>MINERAL OIL; PETROLATUM; PHENYLEPHRINE HYDROCHLORIDE; SHARK LIVER OIL</SubstanceName>
<StrengthNumber>140; 719; 2.5; 30</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Directions: 1 children under 12 years of age: ask a doctor , 2 adults: when practical, cleanse the affected area by patting or blotting with an appropriate cleansing wipe , 3 gently dry by patting or blotting with a tissue or a soft cloth before applying , 4 when first opening tube, remove foil seal , 5 for intrarectal use: remove protective cover form applicator and attach to tube , 6 lubricate applicator well, then gently insert applicator into the rectum , 7 thoroughly clean applicator and replace protective cover after each use , 8 apply externally to the affected area up to 4 times daily, especially at night, in the morning or after each bowel movement , 9 also apply ointment to external area.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43913-405-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (43913-405-16)</PackageDescription>
<NDC11Code>43913-0405-16</NDC11Code>
<ProductNDC>43913-405</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>G-con-x</ProprietaryName>
<NonProprietaryName>Dexbrompheniramine Maleate And Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140211</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>McLaren Medical</LabelerName>
<SubstanceName>DEXBROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1; 30</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the temporary relief of nasal congestion due to the common cold, hay fever or other upper respiratory allergies (allergic rhinitis). Helps decongest sinus openings and passages; temporarily relieves sinus congestion and pressure. For the temporary relief of runny nose, sneezing, itching of the nose or throat and itchy, watery eyes due to hay fever or other respiratory allergies.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50991-405-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (50991-405-16)</PackageDescription>
<NDC11Code>50991-0405-16</NDC11Code>
<ProductNDC>50991-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Poly Hist</ProprietaryName>
<ProprietaryNameSuffix>Pd</ProprietaryNameSuffix>
<NonProprietaryName>Pyrilamine Maleate, Chlorpheniramine Maleate, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040805</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Poly Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PYRILAMINE MALEATE; CHLORPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5; 2; 7.5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC],alpha-1 Adrenergic Agonist [EPC],Adrenergic alpha1-Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-08-29</LastUpdate>
</NDC>
<NDC>
<NDCCode>82393-405-16</NDCCode>
<PackageDescription>20 kg in 1 DRUM (82393-405-16) </PackageDescription>
<NDC11Code>82393-0405-16</NDC11Code>
<ProductNDC>82393-405</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Naltrexone Hcl (anhydrous)</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240301</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Pharma Source Direct, Inc.</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-07-04</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-MAR-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>83745-405-16</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (83745-405-16) </PackageDescription>
<NDC11Code>83745-0405-16</NDC11Code>
<ProductNDC>83745-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactulose</ProprietaryName>
<NonProprietaryName>Lactulose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207786</ApplicationNumber>
<LabelerName>APOZEAL PHARMACEUTICALS INC</LabelerName>
<SubstanceName>LACTULOSE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
<Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of lactulose solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C12H22O11. It has the following structural formula. The molecular weight is 342.30. It is freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>43598-130-74</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (43598-130-74) / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>43598-0130-74</NDC11Code>
<ProductNDC>43598-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/16mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
</NDC>
<NDC>
<NDCCode>43598-484-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-484-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0484-16</NDC11Code>
<ProductNDC>43598-484</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212983</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-485-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-485-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0485-16</NDC11Code>
<ProductNDC>43598-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212983</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-486-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-486-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0486-16</NDC11Code>
<ProductNDC>43598-486</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212796</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-487-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-487-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0487-16</NDC11Code>
<ProductNDC>43598-487</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212796</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-488-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-488-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0488-16</NDC11Code>
<ProductNDC>43598-488</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213233</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-489-16</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (43598-489-16) / 27 LOZENGE in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0489-16</NDC11Code>
<ProductNDC>43598-489</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Polacrilex</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213233</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-891-10</NDCCode>
<PackageDescription>100 CUP, UNIT-DOSE in 1 PACKAGE (43598-891-10) > 15 mL in 1 CUP, UNIT-DOSE (43598-891-16) </PackageDescription>
<NDC11Code>43598-0891-10</NDC11Code>
<ProductNDC>43598-891</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213062</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>meq/15mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-891-52</NDCCode>
<PackageDescription>50 CUP, UNIT-DOSE in 1 PACKAGE (43598-891-52) > 15 mL in 1 CUP, UNIT-DOSE (43598-891-16) </PackageDescription>
<NDC11Code>43598-0891-52</NDC11Code>
<ProductNDC>43598-891</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213062</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>meq/15mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride Oral Solution, USP is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>43598-747-11</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43598-747-11) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0747-11</NDC11Code>
<ProductNDC>43598-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate Ophthalmic Gel Forming Solution 0.25%</ProprietaryName>
<NonProprietaryName>Timolol Maleate Ophthalmic Gel Forming Solution 0.25%</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215733</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol maleate ophthalmic gel forming solution is indicated in the treatment of elevatedintraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol maleate ophthalmic gel forming solution is a non-selective beta adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4 morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. 25°. [α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate, USP has a molecular weight of 432.49. It is a white to practically white powder, which is soluble in water, methanol, and ethanol. Timolol maleate ophthalmic gel forming solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is 6.5 to 7.5, and the osmolality is 260-330 mOsmol/kg. Each mL of timolol maleate ophthalmic gel forming solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate USP). Each mL of timolol maleate ophthalmic gel forming solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate USP). Inactive ingredients: gellan gum, tromethamine, mannitol and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, timolol maleate ophthalmic gel forming solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>43598-748-11</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43598-748-11) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0748-11</NDC11Code>
<ProductNDC>43598-748</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate Ophthalmic Gel Forming Solution 0.5%</ProprietaryName>
<NonProprietaryName>Timolol Maleate Ophthalmic Gel Forming Solution 0.5%</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20221115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215733</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol maleate ophthalmic gel forming solution is indicated in the treatment of elevatedintraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol maleate ophthalmic gel forming solution is a non-selective beta adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4 morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. 25°. [α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate, USP has a molecular weight of 432.49. It is a white to practically white powder, which is soluble in water, methanol, and ethanol. Timolol maleate ophthalmic gel forming solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is 6.5 to 7.5, and the osmolality is 260-330 mOsmol/kg. Each mL of timolol maleate ophthalmic gel forming solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate USP). Each mL of timolol maleate ophthalmic gel forming solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate USP). Inactive ingredients: gellan gum, tromethamine, mannitol and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, timolol maleate ophthalmic gel forming solution forms a gel that is subsequently removed by the flow of tears.</Description>
</NDC>
<NDC>
<NDCCode>43598-045-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-045-28) > 7 CAPSULE in 1 BLISTER PACK (43598-045-70) </PackageDescription>
<NDC11Code>43598-0045-28</NDC11Code>
<ProductNDC>43598-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-045-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-045-63) </PackageDescription>
<NDC11Code>43598-0045-63</NDC11Code>
<ProductNDC>43598-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-046-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-046-28) > 7 CAPSULE in 1 BLISTER PACK (43598-046-70) </PackageDescription>
<NDC11Code>43598-0046-28</NDC11Code>
<ProductNDC>43598-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-046-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-046-63) </PackageDescription>
<NDC11Code>43598-0046-63</NDC11Code>
<ProductNDC>43598-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-047-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-047-28) > 7 CAPSULE in 1 BLISTER PACK (43598-047-70) </PackageDescription>
<NDC11Code>43598-0047-28</NDC11Code>
<ProductNDC>43598-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-047-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-047-63) </PackageDescription>
<NDC11Code>43598-0047-63</NDC11Code>
<ProductNDC>43598-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-048-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (43598-048-28) > 7 CAPSULE in 1 BLISTER PACK (43598-048-70) </PackageDescription>
<NDC11Code>43598-0048-28</NDC11Code>
<ProductNDC>43598-048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-048-63</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (43598-048-63) </PackageDescription>
<NDC11Code>43598-0048-63</NDC11Code>
<ProductNDC>43598-048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunitinib Malate</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215843</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sunitinib is a kinase inhibitor present in sunitinib malate capsules as the malate salt. Sunitinib malate is described chemically as (Z)-N-[2-(Diethylamino)ethyl]-5-[(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide(s)-2-hydroxysuccinate The molecular formula is C22H27FN4O2● C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient at pH 7 is 5.2. Sunitinib malate capsules for oral administration, are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The 12.5 mg capsules shells contains gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The 25 mg, 37.5 mg and 50 mg capsule shells contains gelatin, iron oxide black, sodium lauryl sulfate and titanium dioxide. The white printing ink contains dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, shellac, strong ammonia solution, potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43598-114-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 POUCH (43598-114-10) </PackageDescription>
<NDC11Code>43598-0114-10</NDC11Code>
<ProductNDC>43598-114</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<StartMarketingDate>20230913</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN</SubstanceName>
<StrengthNumber>30; 600</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-09-16</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-SEP-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>43598-115-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 POUCH (43598-115-10) </PackageDescription>
<NDC11Code>43598-0115-10</NDC11Code>
<ProductNDC>43598-115</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Guaifenesin And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<StartMarketingDate>20230913</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN</SubstanceName>
<StrengthNumber>60; 1200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-09-16</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>13-SEP-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>43598-127-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (43598-127-25) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-127-45) </PackageDescription>
<NDC11Code>43598-0127-25</NDC11Code>
<ProductNDC>43598-127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
</NDC>
<NDC>
<NDCCode>43598-128-11</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (43598-128-11) / 8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>43598-0128-11</NDC11Code>
<ProductNDC>43598-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/8mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative.500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing.When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
</NDC>
</NDCList>