{
"NDC": [
{
"NDCCode": "43598-919-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-919-58) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-919-11) ",
"NDC11Code": "43598-0919-58",
"ProductNDC": "43598-919",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211941",
"LabelerName": "Dr. Reddy�s Laboratories Inc.",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200204",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion:. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2- amino-2-(hydroxymethyl)-1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "35000-919-58",
"PackageDescription": "1 TUBE in 1 CARTON (35000-919-58) / 70 g in 1 TUBE",
"NDC11Code": "35000-0919-58",
"ProductNDC": "35000-919",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Colgate",
"ProprietaryNameSuffix": "Sparkling White Mint Zing",
"NonProprietaryName": "Sodium Monofluorophosphate",
"DosageFormName": "GEL, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M021",
"LabelerName": "Colgate-Palmolive Company",
"SubstanceName": "SODIUM MONOFLUOROPHOSPHATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N",
"IndicationAndUsage": "helps protect against cavities."
},
{
"NDCCode": "43598-061-58",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-061-58) > 1 mL in 1 VIAL, SINGLE-DOSE (43598-061-11) ",
"NDC11Code": "43598-0061-58",
"ProductNDC": "43598-061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ziprasidone Mesylate",
"NonProprietaryName": "Ziprasidone Mesylate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20220322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211908",
"LabelerName": "Dr.Reddy's Laboratories, Inc.",
"SubstanceName": "ZIPRASIDONE MESYLATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220322",
"SamplePackage": "N",
"IndicationAndUsage": "Ziprasidone mesylate for injection intramuscular is indicated for acute agitation in schizophrenic patients. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]Acute Treatment of Agitation in Schizophrenia: 1 Ziprasidone mesylate for injection intramuscular is indicated for the treatment of acute agitation in schizophrenic adult patients for whom treatment with ziprasidone is appropriate and who need intramuscular antipsychotic medication for rapid control of agitation.",
"Description": "Ziprasidone mesylate for injection is an atypical antipsychotic available as an injection (ziprasidone mesylate) for intramuscular use only. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The empirical formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone mesylate for injection contains a lyophilized form of ziprasidone mesylate trihydrate. Chemically, ziprasidone mesylate trihydrate is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, methanesulfonate, trihydrate. The empirical formula is C21H21ClN4OS CH3SO3H 3H2O and its molecular weight is 563.09. Ziprasidone mesylate for injection is available in a single-dose vial as ziprasidone mesylate (20 mg ziprasidone/mL when reconstituted according to label instructions) [see Dosage and Administration (2.4)]. Each mL of ziprasidone mesylate for injection (when reconstituted) contains 20 mg of ziprasidone and 4.7 mg of methanesulfonic acid solubilized by 294 mg of sulfobutylether β-cyclodextrin sodium (SBECD)."
},
{
"NDCCode": "43598-078-58",
"PackageDescription": "10 VIAL in 1 CARTON (43598-078-58) / 1 mL in 1 VIAL (43598-078-11) ",
"NDC11Code": "43598-0078-58",
"ProductNDC": "43598-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalaprilat",
"NonProprietaryName": "Enalaprilat",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075578",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "ENALAPRILAT",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230606",
"SamplePackage": "N",
"IndicationAndUsage": "Enalaprilat injection is indicated for the treatment of hypertension when oral therapy is not practical. Enalaprilat injection has been studied with only one other antihypertensive agent, furosemide, which showed approximately additive effects on blood pressure. Enalapril, the pro-drug of enalaprilat, has been used extensively with a variety of other antihypertensive agents, without apparent difficulty except for occasional hypotension. In using enalaprilat injection, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalaprilat injection does not have a similar risk (see WARNINGS). In considering use of enalaprilat, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Angioedema).",
"Description": "Enalaprilat injection, USP is a sterile aqueous solution for intravenous administration. Enalaprilat is an angiotensin-converting enzyme inhibitor. It is chemically described as (S)-1-[N-(1-carboxy-3-phenylpropyl)-L-alanyl]-L-proline dihydrate. Its molecular formula is C18H24N2O52H2O and its structural formula is. Enalaprilat, USP is a white or almost white crystalline powder with a molecular weight of 384.43. It is sparingly soluble in methanol and slightly soluble in water. Each milliliter of enalaprilat injection, USP contains 1.25 mg enalaprilat, USP (anhydrous equivalent); sodium chloride to adjust tonicity; sodium hydroxide to adjust pH; water for injection, q.s.; with benzyl alcohol, 9 mg, added as a preservative."
},
{
"NDCCode": "43598-086-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-086-58) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0086-58",
"ProductNDC": "43598-086",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"ProprietaryNameSuffix": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218753",
"LabelerName": "Dr. Reddy's Laboratories, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250718",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline for injection and other antibacterial drugs, doxycycline for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated in infections caused by the following microorganisms: 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, , 2 Q fever, rickettsial pox and tick fevers)., 3 Mycoplasma pneumoniae (PPLO, Eaton Agent). , 4 Agents of psittacosis and ornithosis., 5 Agents of lymphogranuloma venereum and granuloma inguinale., 6 The spirochetal agent of relapsing fever (Borrelia recurrentis).",
"Description": "Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, USP, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate, USP is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate, USP is a yellow to light yellow powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11- dioxo-2-naphthacenecarboxamide, monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula. (C22H24N2O8·HCl)2·C2H6O·H2O M.W.1025.89. Doxycycline hyclate, USP is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate, USP equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg/mL) is between 1.8 and 3.3."
},
{
"NDCCode": "43598-087-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-087-58) / 20 mL in 1 VIAL, SINGLE-DOSE (43598-087-11) ",
"NDC11Code": "43598-0087-58",
"ProductNDC": "43598-087",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217718",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "43598-106-58",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (43598-106-58) / 2 mL in 1 SYRINGE, GLASS (43598-106-11) ",
"NDC11Code": "43598-0106-58",
"ProductNDC": "43598-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20240807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218422",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260511",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures (See WARNINGS). Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5- phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74Diazepam Injection, USP is a sterile solution and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative."
},
{
"NDCCode": "43598-169-58",
"PackageDescription": "10 VIAL in 1 CARTON (43598-169-58) / 2 mL in 1 VIAL (43598-169-11) ",
"NDC11Code": "43598-0169-58",
"ProductNDC": "43598-169",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalaprilat",
"NonProprietaryName": "Enalaprilat",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075578",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "ENALAPRILAT",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230606",
"SamplePackage": "N",
"IndicationAndUsage": "Enalaprilat injection is indicated for the treatment of hypertension when oral therapy is not practical. Enalaprilat injection has been studied with only one other antihypertensive agent, furosemide, which showed approximately additive effects on blood pressure. Enalapril, the pro-drug of enalaprilat, has been used extensively with a variety of other antihypertensive agents, without apparent difficulty except for occasional hypotension. In using enalaprilat injection, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalaprilat injection does not have a similar risk (see WARNINGS). In considering use of enalaprilat, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Angioedema).",
"Description": "Enalaprilat injection, USP is a sterile aqueous solution for intravenous administration. Enalaprilat is an angiotensin-converting enzyme inhibitor. It is chemically described as (S)-1-[N-(1-carboxy-3-phenylpropyl)-L-alanyl]-L-proline dihydrate. Its molecular formula is C18H24N2O52H2O and its structural formula is. Enalaprilat, USP is a white or almost white crystalline powder with a molecular weight of 384.43. It is sparingly soluble in methanol and slightly soluble in water. Each milliliter of enalaprilat injection, USP contains 1.25 mg enalaprilat, USP (anhydrous equivalent); sodium chloride to adjust tonicity; sodium hydroxide to adjust pH; water for injection, q.s.; with benzyl alcohol, 9 mg, added as a preservative."
},
{
"NDCCode": "43598-265-58",
"PackageDescription": "10 VIAL in 1 CARTON (43598-265-58) / 20 mL in 1 VIAL (43598-265-20) ",
"NDC11Code": "43598-0265-58",
"ProductNDC": "43598-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol Injectable Emulsion",
"NonProprietaryName": "Propofol Injectable Emulsion",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205067",
"LabelerName": "Dr. Reddy's Laboratories, Inc.",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181115",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age. Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age. Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients. Sedation for Adult Patients in Combination with Regional Anesthesia. Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients. Limitations of Use. Propofol injectable emulsion is not recommended for induction of anesthesia below the age of 3 years or for maintenance of anesthesia below the age of 2 months because its safety and effectiveness have not been established in those populations [see Pediatric Use (8.4)]. Safety, effectiveness and dosing guidelines for propofol injectable emulsion have not been established for MAC sedation in the pediatric population; therefore, it is not recommended for this use [see Pediatric Use (8.4)]. Propofol injectable emulsion is not indicated for use in Pediatric ICU sedation since the safety of this regimen has not been established [see Pediatric Use (8.4)].",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight:178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 4.5 to 7.4. Each mL of propofol injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), and benzyl alcohol (0.15%); with sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH of 5.5 to 7.4."
},
{
"NDCCode": "43598-476-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-476-58) / 7 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0476-58",
"ProductNDC": "43598-476",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211403",
"LabelerName": "Dr. Reddy's Laboratories Inc.,",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "350",
"StrengthUnit": "mg/7mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211004",
"SamplePackage": "N",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1-lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 350 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment; between 4.0 to 5.0. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown."
},
{
"NDCCode": "43598-605-58",
"PackageDescription": "56 POUCH in 1 CARTON (43598-605-58) / 1 AMPULE in 1 POUCH (43598-605-11) / 5 mL in 1 AMPULE",
"NDC11Code": "43598-0605-58",
"ProductNDC": "43598-605",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin Inhalation Solution",
"NonProprietaryName": "Tobramycin Inhalation Solution",
"DosageFormName": "INHALANT",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20190514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207080",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2023-04-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201029",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin inhalation solution is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].",
"Description": "Tobramycin inhalation solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, colorless to slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin USP is. Each single-dose 5 mL ampule contains 300 mg tobramycin, USP and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives."
},
{
"NDCCode": "43598-698-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-58) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0698-58",
"ProductNDC": "43598-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211941",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190702",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "43598-735-58",
"PackageDescription": "1 BOTTLE in 1 CARTON (43598-735-58) / 10 TABLET, COATED in 1 BOTTLE",
"NDC11Code": "43598-0735-58",
"ProductNDC": "43598-735",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Levocetirizine Dihydrochloride",
"NonProprietaryName": "Levocetirizine Dihydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210375",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "LEVOCETIRIZINE DIHYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250730",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other respiratory allergies: : 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "43598-750-58",
"PackageDescription": "10 SYRINGE in 1 BOX (43598-750-58) / 2 mL in 1 SYRINGE",
"NDC11Code": "43598-0750-58",
"ProductNDC": "43598-750",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213209",
"LabelerName": "Dr. Reddy's Laboratories, Inc.",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200318",
"EndMarketingDatePackage": "20260430",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free."
},
{
"NDCCode": "43598-848-58",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-848-58) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0848-58",
"ProductNDC": "43598-848",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ziprasidone Mesylate",
"NonProprietaryName": "Ziprasidone Mesylate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211908",
"LabelerName": "Dr.Reddy's Laboratories, Inc.",
"SubstanceName": "ZIPRASIDONE MESYLATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200224",
"SamplePackage": "N",
"IndicationAndUsage": "Ziprasidone mesylate for injection intramuscular is indicated for acute agitation in schizophrenic patients. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]Acute Treatment of Agitation in Schizophrenia: 1 Ziprasidone mesylate for injection intramuscular is indicated for the treatment of acute agitation in schizophrenic adult patients for whom treatment with ziprasidone is appropriate and who need intramuscular antipsychotic medication for rapid control of agitation.",
"Description": "Ziprasidone mesylate for injection is an atypical antipsychotic available as an injection (ziprasidone mesylate) for intramuscular use only. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The empirical formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone mesylate for injection contains a lyophilized form of ziprasidone mesylate trihydrate. Chemically, ziprasidone mesylate trihydrate is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, methanesulfonate, trihydrate. The empirical formula is C21H21ClN4OS CH3SO3H 3H2O and its molecular weight is 563.09. Ziprasidone mesylate for injection is available in a single-dose vial as ziprasidone mesylate (20 mg ziprasidone/mL when reconstituted according to label instructions) [see Dosage and Administration (2.4)]. Each mL of ziprasidone mesylate for injection (when reconstituted) contains 20 mg of ziprasidone and 4.7 mg of methanesulfonic acid solubilized by 294 mg of sulfobutylether β-cyclodextrin sodium (SBECD)."
},
{
"NDCCode": "43598-901-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-901-58) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (43598-901-11) ",
"NDC11Code": "43598-0901-58",
"ProductNDC": "43598-901",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ertapenem Sodium",
"NonProprietaryName": "Ertapenem",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212040",
"LabelerName": "Dr.Reddys Laboratories Inc.,",
"SubstanceName": "ERTAPENEM SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Carbapenems [CS], Penem Antibacterial [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210429",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ertapenem for injection and other antibacterial drugs, Ertapenem for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment. Ertapenem for injection is indicated for the treatment of adult patients and pediatric patients (3 months of age and older) with the following moderate to severe infections caused by susceptible isolates of the designated microorganisms [see Dosage and Administration (2)].",
"Description": "Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, Ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3-carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C22H24N3O7SNa, and its structural formula is. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for Injection is supplied as sterile lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1 gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of Ertapenem for Injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5."
},
{
"NDCCode": "43598-917-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-917-58) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-917-11) ",
"NDC11Code": "43598-0917-58",
"ProductNDC": "43598-917",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211941",
"LabelerName": "Dr. Reddy�s Laboratories Inc.",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200204",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2- amino-2-(hydroxymethyl)-1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "43598-945-58",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (43598-945-58) / 1 SYRINGE, GLASS in 1 BLISTER PACK (43598-945-11) / 3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "43598-0945-58",
"ProductNDC": "43598-945",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216291",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.",
"Description": "Neostigmine Methylsulfate Injection USP, a cholinesterase inhibitor, has an molecular formula of C13H22N2O6S, a molecular weight of 334.39 g/mol and the following structural formula. Neostigmine Methylsulfate Injection, USP is formulated with neostigmine methylsulfate, a white to off white crystalline powder, chemically designated as (m-hydroxyphenyl)trimethyl ammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in the following dosage strength; 3 mg per 3 mL (1 mg per mL) in a single-dose prefilled syringe for intravenous use only. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "43598-975-58",
"PackageDescription": "10 VIAL in 1 CARTON (43598-975-58) / 100 mL in 1 VIAL (43598-975-11) ",
"NDC11Code": "43598-0975-58",
"ProductNDC": "43598-975",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209307",
"LabelerName": "Dr.Reddy's Laboratories Inc",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200817",
"SamplePackage": "N",
"Description": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine and 9 mg sodium chloride in water and is ready to be used. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "43598-976-58",
"PackageDescription": "10 VIAL in 1 CARTON (43598-976-58) / 50 mL in 1 VIAL (43598-976-11) ",
"NDC11Code": "43598-0976-58",
"ProductNDC": "43598-976",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209307",
"LabelerName": "Dr.Reddy's Laboratories Inc",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200817",
"SamplePackage": "N",
"Description": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine and 9 mg sodium chloride in water and is ready to be used. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "59735-919-02",
"PackageDescription": "1 TUBE in 1 BOX (59735-919-02) / 35 mL in 1 TUBE (59735-919-01) ",
"NDC11Code": "59735-0919-02",
"ProductNDC": "59735-919",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Protectint 40w",
"NonProprietaryName": "Homosalate, Octisalate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231122",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "PML NYC, LLC",
"SubstanceName": "HOMOSALATE; ZINC OXIDE; OCTISALATE",
"StrengthNumber": "7; 13.58; 5",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2026-04-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231122",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctorif rash occurs."
},
{
"NDCCode": "43598-283-35",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-283-35) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0283-35",
"ProductNDC": "43598-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170522",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-541-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-541-25) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0541-25",
"ProductNDC": "43598-541",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170522",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-618-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-618-60) ",
"NDC11Code": "43598-0618-60",
"ProductNDC": "43598-618",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207678",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SAXAGLIPTIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "2.5; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230809",
"SamplePackage": "N",
"IndicationAndUsage": "Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].",
"Description": "Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "43598-619-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-619-30) ",
"NDC11Code": "43598-0619-30",
"ProductNDC": "43598-619",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207678",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SAXAGLIPTIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "5; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230809",
"SamplePackage": "N",
"IndicationAndUsage": "Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].",
"Description": "Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "43598-620-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-620-30) ",
"NDC11Code": "43598-0620-30",
"ProductNDC": "43598-620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Saxagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207678",
"LabelerName": "Dr.Reddys Laboratories Inc",
"SubstanceName": "SAXAGLIPTIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230809",
"SamplePackage": "N",
"IndicationAndUsage": "Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].",
"Description": "Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "43598-682-35",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-682-35) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0682-35",
"ProductNDC": "43598-682",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180313",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "43598-683-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-683-25) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0683-25",
"ProductNDC": "43598-683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTABLE, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208657",
"LabelerName": "Dr. Reddy's Laboratories Inc",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180313",
"SamplePackage": "N",
"Description": "Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome."
},
{
"NDCCode": "10544-919-14",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10544-919-14)",
"NDC11Code": "10544-0919-14",
"ProductNDC": "10544-919",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Indomethacin",
"NonProprietaryName": "Indomethacin",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091549",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "INDOMETHACIN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Indomethacin Extended-Release Capsules, USP and other treatment options before deciding to use Indomethacin Extended-Release Capsules, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Indomethacin Extended-Release Capsules, USP have been found effective in active stages of the following. 1. Moderate to severe rheumatoid arthritis including acute flares of chronic disease. 2. Moderate to severe ankylosing spondylitis. 3. Moderate to sever osteoarthritis. 4. Acute painful shoulder (bursitis and/or tendonitis). Indomethacin Extended-Release Capsules, USP are not recommended for the treatment of acute gouty arthritis. Indomethacin may enable the reduction of steroid dosage in patients receiving steroids for the more sever forms of rheumatoid arthritis. In such instances the steroid dosage should be reduced slowly and the patients followed very closely for any possible adverse effects. The use of indomethacin in conjunction with aspirin or other salicylates is not recommended. Controlled clinical studies have shown that the combined use of indomethacin and aspirin does not product any greater therapeutic effect than the use of indomethacin alone. Furthermore, in one of these clinical studies, the incidence of gastrointestinal side effects was significantly increased with combined therapy. (see PRECAUTIONS, Drug Interactions).",
"Description": "Indomethacin cannot be considered a simple analgesic and should not be used in conditions other than those recommended under INDICATION AND USAGE. Indomethacin is a non-steroidal anti-inflammatory indole derivative designated chemically as 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1 H-indole-3-acetic acid. Indomethacin is practically insoluble in water and sparingly soluble in alcohol. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The structural formula is:. M.W. 357.80 C 19H1 6ClNO 4. Each extended-release capsule, for oral administration contains 75 mg of indomethacin. In addition, each capsule contains the following inactive ingredients: ammonia, black iron oxide, butyl alcohol, corn starch, dehydrated alcohol, FD&C Blue No. 1, FD&C Green No. 3, FD&C Yellow No. 5, FD&C Red No. 40, gelatin, isopropyl alcohol, lactose monohydrate, potassium hydroxide, povidone, propylene glycol, shellac, sucrose and talc. This Product meets the USP Drug Release Test 2 Specifications."
},
{
"NDCCode": "10577-919-20",
"PackageDescription": "1 BAG in 1 DRUM (10577-919-20) / 20 kg in 1 BAG",
"NDC11Code": "10577-0919-20",
"ProductNDC": "10577-919",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Methylnaltrexone Bromide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20241001",
"EndMarketingDate": "20290729",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "PCAS",
"SubstanceName": "METHYLNALTREXONE BROMIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2026-01-19",
"StartMarketingDatePackage": "01-OCT-24",
"EndMarketingDatePackage": "29-JUL-29"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>43598-919-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-919-58) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-919-11) </PackageDescription>
<NDC11Code>43598-0919-58</NDC11Code>
<ProductNDC>43598-919</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211941</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories Inc.</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion:. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2- amino-2-(hydroxymethyl)-1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>35000-919-58</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (35000-919-58) / 70 g in 1 TUBE</PackageDescription>
<NDC11Code>35000-0919-58</NDC11Code>
<ProductNDC>35000-919</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Colgate</ProprietaryName>
<ProprietaryNameSuffix>Sparkling White Mint Zing</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Monofluorophosphate</NonProprietaryName>
<DosageFormName>GEL, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M021</ApplicationNumber>
<LabelerName>Colgate-Palmolive Company</LabelerName>
<SubstanceName>SODIUM MONOFLUOROPHOSPHATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps protect against cavities.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-061-58</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-061-58) > 1 mL in 1 VIAL, SINGLE-DOSE (43598-061-11) </PackageDescription>
<NDC11Code>43598-0061-58</NDC11Code>
<ProductNDC>43598-061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ziprasidone Mesylate</ProprietaryName>
<NonProprietaryName>Ziprasidone Mesylate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211908</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>ZIPRASIDONE MESYLATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ziprasidone mesylate for injection intramuscular is indicated for acute agitation in schizophrenic patients. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]Acute Treatment of Agitation in Schizophrenia: 1 Ziprasidone mesylate for injection intramuscular is indicated for the treatment of acute agitation in schizophrenic adult patients for whom treatment with ziprasidone is appropriate and who need intramuscular antipsychotic medication for rapid control of agitation.</IndicationAndUsage>
<Description>Ziprasidone mesylate for injection is an atypical antipsychotic available as an injection (ziprasidone mesylate) for intramuscular use only. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The empirical formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone mesylate for injection contains a lyophilized form of ziprasidone mesylate trihydrate. Chemically, ziprasidone mesylate trihydrate is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, methanesulfonate, trihydrate. The empirical formula is C21H21ClN4OS CH3SO3H 3H2O and its molecular weight is 563.09. Ziprasidone mesylate for injection is available in a single-dose vial as ziprasidone mesylate (20 mg ziprasidone/mL when reconstituted according to label instructions) [see Dosage and Administration (2.4)]. Each mL of ziprasidone mesylate for injection (when reconstituted) contains 20 mg of ziprasidone and 4.7 mg of methanesulfonic acid solubilized by 294 mg of sulfobutylether β-cyclodextrin sodium (SBECD).</Description>
</NDC>
<NDC>
<NDCCode>43598-078-58</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (43598-078-58) / 1 mL in 1 VIAL (43598-078-11) </PackageDescription>
<NDC11Code>43598-0078-58</NDC11Code>
<ProductNDC>43598-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalaprilat</ProprietaryName>
<NonProprietaryName>Enalaprilat</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075578</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>ENALAPRILAT</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalaprilat injection is indicated for the treatment of hypertension when oral therapy is not practical. Enalaprilat injection has been studied with only one other antihypertensive agent, furosemide, which showed approximately additive effects on blood pressure. Enalapril, the pro-drug of enalaprilat, has been used extensively with a variety of other antihypertensive agents, without apparent difficulty except for occasional hypotension. In using enalaprilat injection, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalaprilat injection does not have a similar risk (see WARNINGS). In considering use of enalaprilat, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Angioedema).</IndicationAndUsage>
<Description>Enalaprilat injection, USP is a sterile aqueous solution for intravenous administration. Enalaprilat is an angiotensin-converting enzyme inhibitor. It is chemically described as (S)-1-[N-(1-carboxy-3-phenylpropyl)-L-alanyl]-L-proline dihydrate. Its molecular formula is C18H24N2O52H2O and its structural formula is. Enalaprilat, USP is a white or almost white crystalline powder with a molecular weight of 384.43. It is sparingly soluble in methanol and slightly soluble in water. Each milliliter of enalaprilat injection, USP contains 1.25 mg enalaprilat, USP (anhydrous equivalent); sodium chloride to adjust tonicity; sodium hydroxide to adjust pH; water for injection, q.s.; with benzyl alcohol, 9 mg, added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>43598-086-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-086-58) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0086-58</NDC11Code>
<ProductNDC>43598-086</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<ProprietaryNameSuffix>Doxycycline</ProprietaryNameSuffix>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218753</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline for injection and other antibacterial drugs, doxycycline for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated in infections caused by the following microorganisms: 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, , 2 Q fever, rickettsial pox and tick fevers)., 3 Mycoplasma pneumoniae (PPLO, Eaton Agent). , 4 Agents of psittacosis and ornithosis., 5 Agents of lymphogranuloma venereum and granuloma inguinale., 6 The spirochetal agent of relapsing fever (Borrelia recurrentis).</IndicationAndUsage>
<Description>Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, USP, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate, USP is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate, USP is a yellow to light yellow powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11- dioxo-2-naphthacenecarboxamide, monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula. (C22H24N2O8·HCl)2·C2H6O·H2O M.W.1025.89. Doxycycline hyclate, USP is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate, USP equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg/mL) is between 1.8 and 3.3.</Description>
</NDC>
<NDC>
<NDCCode>43598-087-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-087-58) / 20 mL in 1 VIAL, SINGLE-DOSE (43598-087-11) </PackageDescription>
<NDC11Code>43598-0087-58</NDC11Code>
<ProductNDC>43598-087</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217718</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>43598-106-58</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (43598-106-58) / 2 mL in 1 SYRINGE, GLASS (43598-106-11) </PackageDescription>
<NDC11Code>43598-0106-58</NDC11Code>
<ProductNDC>43598-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20240807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218422</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures (See WARNINGS). Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5- phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74Diazepam Injection, USP is a sterile solution and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>43598-169-58</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (43598-169-58) / 2 mL in 1 VIAL (43598-169-11) </PackageDescription>
<NDC11Code>43598-0169-58</NDC11Code>
<ProductNDC>43598-169</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalaprilat</ProprietaryName>
<NonProprietaryName>Enalaprilat</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075578</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>ENALAPRILAT</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalaprilat injection is indicated for the treatment of hypertension when oral therapy is not practical. Enalaprilat injection has been studied with only one other antihypertensive agent, furosemide, which showed approximately additive effects on blood pressure. Enalapril, the pro-drug of enalaprilat, has been used extensively with a variety of other antihypertensive agents, without apparent difficulty except for occasional hypotension. In using enalaprilat injection, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalaprilat injection does not have a similar risk (see WARNINGS). In considering use of enalaprilat, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Angioedema).</IndicationAndUsage>
<Description>Enalaprilat injection, USP is a sterile aqueous solution for intravenous administration. Enalaprilat is an angiotensin-converting enzyme inhibitor. It is chemically described as (S)-1-[N-(1-carboxy-3-phenylpropyl)-L-alanyl]-L-proline dihydrate. Its molecular formula is C18H24N2O52H2O and its structural formula is. Enalaprilat, USP is a white or almost white crystalline powder with a molecular weight of 384.43. It is sparingly soluble in methanol and slightly soluble in water. Each milliliter of enalaprilat injection, USP contains 1.25 mg enalaprilat, USP (anhydrous equivalent); sodium chloride to adjust tonicity; sodium hydroxide to adjust pH; water for injection, q.s.; with benzyl alcohol, 9 mg, added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>43598-265-58</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (43598-265-58) / 20 mL in 1 VIAL (43598-265-20) </PackageDescription>
<NDC11Code>43598-0265-58</NDC11Code>
<ProductNDC>43598-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol Injectable Emulsion</ProprietaryName>
<NonProprietaryName>Propofol Injectable Emulsion</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205067</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age. Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age. Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients. Sedation for Adult Patients in Combination with Regional Anesthesia. Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients. Limitations of Use. Propofol injectable emulsion is not recommended for induction of anesthesia below the age of 3 years or for maintenance of anesthesia below the age of 2 months because its safety and effectiveness have not been established in those populations [see Pediatric Use (8.4)]. Safety, effectiveness and dosing guidelines for propofol injectable emulsion have not been established for MAC sedation in the pediatric population; therefore, it is not recommended for this use [see Pediatric Use (8.4)]. Propofol injectable emulsion is not indicated for use in Pediatric ICU sedation since the safety of this regimen has not been established [see Pediatric Use (8.4)].</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight:178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 4.5 to 7.4. Each mL of propofol injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), and benzyl alcohol (0.15%); with sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH of 5.5 to 7.4.</Description>
</NDC>
<NDC>
<NDCCode>43598-476-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-476-58) / 7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0476-58</NDC11Code>
<ProductNDC>43598-476</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211403</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.,</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/7mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1-lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 350 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.5)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment; between 4.0 to 5.0. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>43598-605-58</NDCCode>
<PackageDescription>56 POUCH in 1 CARTON (43598-605-58) / 1 AMPULE in 1 POUCH (43598-605-11) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>43598-0605-58</NDC11Code>
<ProductNDC>43598-605</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin Inhalation Solution</ProprietaryName>
<NonProprietaryName>Tobramycin Inhalation Solution</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20190514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207080</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin inhalation solution is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Tobramycin inhalation solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, colorless to slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin USP is. Each single-dose 5 mL ampule contains 300 mg tobramycin, USP and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>43598-698-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-58) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0698-58</NDC11Code>
<ProductNDC>43598-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211941</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>43598-735-58</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (43598-735-58) / 10 TABLET, COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>43598-0735-58</NDC11Code>
<ProductNDC>43598-735</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Levocetirizine Dihydrochloride</ProprietaryName>
<NonProprietaryName>Levocetirizine Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210375</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>LEVOCETIRIZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other respiratory allergies: : 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-750-58</NDCCode>
<PackageDescription>10 SYRINGE in 1 BOX (43598-750-58) / 2 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>43598-0750-58</NDC11Code>
<ProductNDC>43598-750</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213209</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200318</StartMarketingDatePackage>
<EndMarketingDatePackage>20260430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. NALOXONE HYDROCHLORIDE. (-)-17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride. Naloxone hydrochloride dihydrate occurs as a white to almost white powder, and is freely soluble in water, soluble in ethanol (96%); practically insoluble in toluene. Naloxone hydrochloride injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in 1 mg/mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>43598-848-58</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-848-58) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0848-58</NDC11Code>
<ProductNDC>43598-848</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ziprasidone Mesylate</ProprietaryName>
<NonProprietaryName>Ziprasidone Mesylate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211908</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories, Inc.</LabelerName>
<SubstanceName>ZIPRASIDONE MESYLATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ziprasidone mesylate for injection intramuscular is indicated for acute agitation in schizophrenic patients. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]Acute Treatment of Agitation in Schizophrenia: 1 Ziprasidone mesylate for injection intramuscular is indicated for the treatment of acute agitation in schizophrenic adult patients for whom treatment with ziprasidone is appropriate and who need intramuscular antipsychotic medication for rapid control of agitation.</IndicationAndUsage>
<Description>Ziprasidone mesylate for injection is an atypical antipsychotic available as an injection (ziprasidone mesylate) for intramuscular use only. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The empirical formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone mesylate for injection contains a lyophilized form of ziprasidone mesylate trihydrate. Chemically, ziprasidone mesylate trihydrate is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, methanesulfonate, trihydrate. The empirical formula is C21H21ClN4OS CH3SO3H 3H2O and its molecular weight is 563.09. Ziprasidone mesylate for injection is available in a single-dose vial as ziprasidone mesylate (20 mg ziprasidone/mL when reconstituted according to label instructions) [see Dosage and Administration (2.4)]. Each mL of ziprasidone mesylate for injection (when reconstituted) contains 20 mg of ziprasidone and 4.7 mg of methanesulfonic acid solubilized by 294 mg of sulfobutylether β-cyclodextrin sodium (SBECD).</Description>
</NDC>
<NDC>
<NDCCode>43598-901-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-901-58) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (43598-901-11) </PackageDescription>
<NDC11Code>43598-0901-58</NDC11Code>
<ProductNDC>43598-901</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ertapenem Sodium</ProprietaryName>
<NonProprietaryName>Ertapenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212040</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc.,</LabelerName>
<SubstanceName>ERTAPENEM SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ertapenem for injection and other antibacterial drugs, Ertapenem for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment. Ertapenem for injection is indicated for the treatment of adult patients and pediatric patients (3 months of age and older) with the following moderate to severe infections caused by susceptible isolates of the designated microorganisms [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Ertapenem for injection is a sterile, synthetic, parenteral, 1-β methyl-carbapenem that is structurally related to beta-lactam antibiotics. Chemically, Ertapenem for injection is described as [4R-[3(3S*,5S*),4α,5β,6β(R*)]]-3-[[5-[[(3-carboxyphenyl)amino]carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monosodium salt. Its molecular weight is 497.50. The empirical formula is C22H24N3O7SNa, and its structural formula is. Ertapenem sodium is a white to off-white hygroscopic, weakly crystalline powder. It is soluble in water and 0.9% sodium chloride solution, practically insoluble in ethanol, and insoluble in isopropyl acetate and tetrahydrofuran. Ertapenem for Injection is supplied as sterile lyophilized powder for intravenous infusion after reconstitution with appropriate diluent [see Dosage and Administration (2.7)] and transfer to 50 mL 0.9% Sodium Chloride Injection or for intramuscular injection following reconstitution with 1% lidocaine hydrochloride. Each single-dose vial contains 1 gram ertapenem equivalent to 1.046 grams ertapenem sodium. The sodium content is approximately 137 mg (approximately 6.0 mEq). Each vial of Ertapenem for Injection contains the following inactive ingredients: 175 mg sodium bicarbonate and sodium hydroxide to adjust pH to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>43598-917-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-917-58) / 1 mL in 1 VIAL, SINGLE-DOSE (43598-917-11) </PackageDescription>
<NDC11Code>43598-0917-58</NDC11Code>
<ProductNDC>43598-917</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211941</ApplicationNumber>
<LabelerName>Dr. Reddy�s Laboratories Inc.</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2- amino-2-(hydroxymethyl)-1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>43598-945-58</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (43598-945-58) / 1 SYRINGE, GLASS in 1 BLISTER PACK (43598-945-11) / 3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>43598-0945-58</NDC11Code>
<ProductNDC>43598-945</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216291</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.</IndicationAndUsage>
<Description>Neostigmine Methylsulfate Injection USP, a cholinesterase inhibitor, has an molecular formula of C13H22N2O6S, a molecular weight of 334.39 g/mol and the following structural formula. Neostigmine Methylsulfate Injection, USP is formulated with neostigmine methylsulfate, a white to off white crystalline powder, chemically designated as (m-hydroxyphenyl)trimethyl ammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in the following dosage strength; 3 mg per 3 mL (1 mg per mL) in a single-dose prefilled syringe for intravenous use only. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>43598-975-58</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (43598-975-58) / 100 mL in 1 VIAL (43598-975-11) </PackageDescription>
<NDC11Code>43598-0975-58</NDC11Code>
<ProductNDC>43598-975</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209307</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine and 9 mg sodium chloride in water and is ready to be used. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>43598-976-58</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (43598-976-58) / 50 mL in 1 VIAL (43598-976-11) </PackageDescription>
<NDC11Code>43598-0976-58</NDC11Code>
<ProductNDC>43598-976</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209307</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H-imidazole monohydrochloride. Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 and the empirical formula is C13H16N2HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine and 9 mg sodium chloride in water and is ready to be used. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>59735-919-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (59735-919-02) / 35 mL in 1 TUBE (59735-919-01) </PackageDescription>
<NDC11Code>59735-0919-02</NDC11Code>
<ProductNDC>59735-919</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Protectint 40w</ProprietaryName>
<NonProprietaryName>Homosalate, Octisalate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231122</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>PML NYC, LLC</LabelerName>
<SubstanceName>HOMOSALATE; ZINC OXIDE; OCTISALATE</SubstanceName>
<StrengthNumber>7; 13.58; 5</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctorif rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43598-283-35</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-283-35) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0283-35</NDC11Code>
<ProductNDC>43598-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-541-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-541-25) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0541-25</NDC11Code>
<ProductNDC>43598-541</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-618-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-618-60) </PackageDescription>
<NDC11Code>43598-0618-60</NDC11Code>
<ProductNDC>43598-618</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Saxagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207678</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAXAGLIPTIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>43598-619-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-619-30) </PackageDescription>
<NDC11Code>43598-0619-30</NDC11Code>
<ProductNDC>43598-619</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Saxagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207678</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAXAGLIPTIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>43598-620-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43598-620-30) </PackageDescription>
<NDC11Code>43598-0620-30</NDC11Code>
<ProductNDC>43598-620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Saxagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207678</ApplicationNumber>
<LabelerName>Dr.Reddys Laboratories Inc</LabelerName>
<SubstanceName>SAXAGLIPTIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin monohydrate is described chemically as (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile, monohydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile monohydrate. The molecular formula is C18H25N3O2H2O and the molecular weight is 333.43. The structural formula is. Saxagliptin monohydrate is a white to light yellow or light brown, non-hygroscopic powder. It is very soluble at room temperate in methanol, freely soluble in ethanol, soluble in acetone, sparingly soluble in ethyl acetate and water, and slightly soluble in 1-octanol. Metformin Hydrochloride, USP. Metformin HCl (N,N-dimethyl imido-dicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 8.6. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 500 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 5.58 mg saxagliptin HCl (anhydrous) equivalent to 5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1,000 mg), or 2.79 saxagliptin HCl (anhydrous) equivalent to 2.5 mg saxagliptin and 1,000 mg metformin HCl, USP (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1,000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release tablets contains the following inactive ingredients: colloidal silicon dioxide, hydrochloric acid, hypromellose, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, shellac, talc, titanium dioxide. In addition, 5 mg/500 mg tablets contain iron oxide red and iron oxide yellow; 5 mg/1,000 mg tablets contain iron oxide red; 2.5 mg/1,000 mg tablets contain iron oxide yellow. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>43598-682-35</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (43598-682-35) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0682-35</NDC11Code>
<ProductNDC>43598-682</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>43598-683-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-683-25) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0683-25</NDC11Code>
<ProductNDC>43598-683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208657</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-nap hthacenedione hydrochloride. The molecular formula is C27H29NO11HCl; its molecular weight is 579.99. The structure formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula. n=ca. 45. HSPC has the following structural formula. m,n=14 or 16. Representation of a PEGYLATED liposome.</Description>
</NDC>
<NDC>
<NDCCode>10544-919-14</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (10544-919-14)</PackageDescription>
<NDC11Code>10544-0919-14</NDC11Code>
<ProductNDC>10544-919</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Indomethacin</ProprietaryName>
<NonProprietaryName>Indomethacin</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091549</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>INDOMETHACIN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Indomethacin Extended-Release Capsules, USP and other treatment options before deciding to use Indomethacin Extended-Release Capsules, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Indomethacin Extended-Release Capsules, USP have been found effective in active stages of the following. 1. Moderate to severe rheumatoid arthritis including acute flares of chronic disease. 2. Moderate to severe ankylosing spondylitis. 3. Moderate to sever osteoarthritis. 4. Acute painful shoulder (bursitis and/or tendonitis). Indomethacin Extended-Release Capsules, USP are not recommended for the treatment of acute gouty arthritis. Indomethacin may enable the reduction of steroid dosage in patients receiving steroids for the more sever forms of rheumatoid arthritis. In such instances the steroid dosage should be reduced slowly and the patients followed very closely for any possible adverse effects. The use of indomethacin in conjunction with aspirin or other salicylates is not recommended. Controlled clinical studies have shown that the combined use of indomethacin and aspirin does not product any greater therapeutic effect than the use of indomethacin alone. Furthermore, in one of these clinical studies, the incidence of gastrointestinal side effects was significantly increased with combined therapy. (see PRECAUTIONS, Drug Interactions).</IndicationAndUsage>
<Description>Indomethacin cannot be considered a simple analgesic and should not be used in conditions other than those recommended under INDICATION AND USAGE. Indomethacin is a non-steroidal anti-inflammatory indole derivative designated chemically as 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1 H-indole-3-acetic acid. Indomethacin is practically insoluble in water and sparingly soluble in alcohol. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The structural formula is:. M.W. 357.80 C 19H1 6ClNO 4. Each extended-release capsule, for oral administration contains 75 mg of indomethacin. In addition, each capsule contains the following inactive ingredients: ammonia, black iron oxide, butyl alcohol, corn starch, dehydrated alcohol, FD&C Blue No. 1, FD&C Green No. 3, FD&C Yellow No. 5, FD&C Red No. 40, gelatin, isopropyl alcohol, lactose monohydrate, potassium hydroxide, povidone, propylene glycol, shellac, sucrose and talc. This Product meets the USP Drug Release Test 2 Specifications.</Description>
</NDC>
<NDC>
<NDCCode>10577-919-20</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (10577-919-20) / 20 kg in 1 BAG</PackageDescription>
<NDC11Code>10577-0919-20</NDC11Code>
<ProductNDC>10577-919</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Methylnaltrexone Bromide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20241001</StartMarketingDate>
<EndMarketingDate>20290729</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>PCAS</LabelerName>
<SubstanceName>METHYLNALTREXONE BROMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-01-19</LastUpdate>
<StartMarketingDatePackage>01-OCT-24</StartMarketingDatePackage>
<EndMarketingDatePackage>29-JUL-29</EndMarketingDatePackage>
</NDC>
</NDCList>