RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>43602-394-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-394-05) </PackageDescription>
    <NDC11Code>43602-0394-05</NDC11Code>
    <ProductNDC>43602-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201023</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214419</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Venlafaxine extended-release tablets (venlafaxine hydrochloride) are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a off-white to white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine extended-release tablets are formulated as extended-release tablet for once-a-day oral administration. Venlafaxine extended-release tablets use osmotic pressure to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active core surrounded by a semipermeable membrane. The unitary tablet core is composed of the drug and excipients (including the osmotically active components). There is a precision-laser drilled orifice in the semipermeable membrane on the side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to dissolve and the osmotic components to expand. This expansion pushes the drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of venlafaxine extended-release tablets depends on the existence of an osmotic gradient between the contents of the core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Tablets contain Venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of mannitol, microcrystalline cellulose, povidone, polyethylene glycol, colloidal silicon dioxide, magnesium stearate, cellulose acetate, hypromellose, titanium dioxide and talc. Each tablet strength also contains black iron oxide, hypromellose and propylene glycol as imprinting ink.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-394-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-394-30) </PackageDescription>
    <NDC11Code>43602-0394-30</NDC11Code>
    <ProductNDC>43602-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201023</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214419</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Venlafaxine extended-release tablets (venlafaxine hydrochloride) are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a off-white to white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine extended-release tablets are formulated as extended-release tablet for once-a-day oral administration. Venlafaxine extended-release tablets use osmotic pressure to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active core surrounded by a semipermeable membrane. The unitary tablet core is composed of the drug and excipients (including the osmotically active components). There is a precision-laser drilled orifice in the semipermeable membrane on the side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to dissolve and the osmotic components to expand. This expansion pushes the drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of venlafaxine extended-release tablets depends on the existence of an osmotic gradient between the contents of the core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Tablets contain Venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of mannitol, microcrystalline cellulose, povidone, polyethylene glycol, colloidal silicon dioxide, magnesium stearate, cellulose acetate, hypromellose, titanium dioxide and talc. Each tablet strength also contains black iron oxide, hypromellose and propylene glycol as imprinting ink.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-394-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (43598-394-05) </PackageDescription>
    <NDC11Code>43598-0394-05</NDC11Code>
    <ProductNDC>43598-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetrabenazine</ProprietaryName>
    <NonProprietaryName>Tetrabenazine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209284</ApplicationNumber>
    <LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
    <SubstanceName>TETRABENAZINE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Vesicular Monoamine Transporter 2 Inhibitor [EPC], Vesicular Monoamine Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-12-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180108</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tetrabenazine tablets are indicated for the treatment of chorea associated with Huntington’s disease.</IndicationAndUsage>
    <Description>Tetrabenazine is a monoamine depletor for oral administration. The molecular weight of tetrabenazine is 317.43; the pKa is 6.51. Tetrabenazine is a hexahydro-dimethoxy-benzoquinolizine derivative and has the following chemical name: cis rac –1,3,4,6,7,11b-hexahydro-9,10-dimethoxy-3-(2-methylpropyl)­-2H-benzo[a]quinolizin-2-one.  The molecular formula C19H27NO3 is represented by the following structural formula. Tetrabenazine is a off-white to pale yellow powder that is soluble in chloroform and sparingly soluble in methanol. Each tetrabenazine tablet contains either 12.5 or 25 mg of tetrabenazine as the active ingredient. Tetrabenazine tablets contain tetrabenazine as the active ingredient and the following inactive ingredients: corn starch, ferric oxide yellow, lactose monohydrate, magnesium stearate, pregelatinized starch, and talc. Tetrabenazine tablets are supplied as a light yellow to yellow, round flat-faced beveled edge uncoated, scored tablet containing 25 mg of tetrabenazine or as a light yellow to yellow, round flat-faced beveled edge uncoated, non-scored tablet containing 12.5 mg of tetrabenazine.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-394-05</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-394-05) </PackageDescription>
    <NDC11Code>49643-0394-05</NDC11Code>
    <ProductNDC>49643-394</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>White Poplar Pollen</ProprietaryName>
    <NonProprietaryName>Populus Alba</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>POPULUS ALBA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>55289-394-05</NDCCode>
    <PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-394-05) </PackageDescription>
    <NDC11Code>55289-0394-05</NDC11Code>
    <ProductNDC>55289-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levaquin</ProprietaryName>
    <NonProprietaryName>Levofloxacin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19961220</StartMarketingDate>
    <EndMarketingDate>20200531</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020634</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOFLOXACIN</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20111024</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>59651-394-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (59651-394-05) </PackageDescription>
    <NDC11Code>59651-0394-05</NDC11Code>
    <ProductNDC>59651-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210713</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214099</ApplicationNumber>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210713</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen tablets treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson’s disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
    <Description>Baclofen USP, is a muscle relaxant and antispastic, available as 10 mg and 20 mg tablets for oral administration. Its chemical name is 4-amino-3-(4-chlorophenyl)- butanoic acid, and its structural formula is. Baclofen USP is a white to off-white crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol and in 96% ethanol, practically insoluble in acetone, insoluble in chloroform, dissolves in dilute mineral acids and in dilute solutions of alkali hydroxides. Inactive Ingredients. Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (maize). FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>63730-394-05</NDCCode>
    <PackageDescription>2 mg in 1 TUBE (63730-394-05)</PackageDescription>
    <NDC11Code>63730-0394-05</NDC11Code>
    <ProductNDC>63730-394</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>S.o.s. Instant Rescue</ProprietaryName>
    <NonProprietaryName>Dimethicone</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170308</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part347</ApplicationNumber>
    <LabelerName>NATURA BISS� INTERNATIONAL, S.A.</LabelerName>
    <SubstanceName>DIMETHICONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/100mg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-06-18</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>68382-394-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (68382-394-05) </PackageDescription>
    <NDC11Code>68382-0394-05</NDC11Code>
    <ProductNDC>68382-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-08-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>68428-394-05</NDCCode>
    <PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-394-05) </PackageDescription>
    <NDC11Code>68428-0394-05</NDC11Code>
    <ProductNDC>68428-394</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Fraxinus Americana</ProprietaryName>
    <NonProprietaryName>Fraxinus Americana Bark</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100203</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>FRAXINUS AMERICANA BARK</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-04-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69367-394-05</NDCCode>
    <PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (69367-394-05) </PackageDescription>
    <NDC11Code>69367-0394-05</NDC11Code>
    <ProductNDC>69367-394</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202413</ApplicationNumber>
    <LabelerName>Westminster Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
    <Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (&lt;1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 300 mg, 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>84525-394-05</NDCCode>
    <PackageDescription>100 g in 1 BOX (84525-394-05) </PackageDescription>
    <NDC11Code>84525-0394-05</NDC11Code>
    <ProductNDC>84525-394</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Trstay Coconut Body Butter</ProprietaryName>
    <NonProprietaryName>Trstay Coconut Body Butter</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250110</StartMarketingDate>
    <EndMarketingDate>20310110</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M016</ApplicationNumber>
    <LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
    <SubstanceName>NIACINAMIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250110</StartMarketingDatePackage>
    <EndMarketingDatePackage>20310110</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84827-394-05</NDCCode>
    <PackageDescription>100 mL in 1 BOX (84827-394-05) </PackageDescription>
    <NDC11Code>84827-0394-05</NDC11Code>
    <ProductNDC>84827-394</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Trstay Castor Oil</ProprietaryName>
    <NonProprietaryName>Trstay Castor Oil</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20241104</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M032</ApplicationNumber>
    <LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
    <SubstanceName>MINOXIDIL</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>43602-002-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (43602-002-05) </PackageDescription>
    <NDC11Code>43602-0002-05</NDC11Code>
    <ProductNDC>43602-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210506</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals Inc</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-09-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydromorphone Hydrochloride, USP, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone Hydrochloride Tablets, USP are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of Hydromorphone Hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C17H19NO3·HCl, and it has the following chemical structure. Hydromorphone Hydrochloride, USP is a white or almost white crystalline powder that is freely soluble in water, sparingly soluble in alcohol, practically insoluble in ether. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous, microcrystalline cellulose and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&amp;C red #30 Lake dye, and D&amp;C yellow #10. The 4 mg tablets also contain D&amp;C yellow #10.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-003-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (43602-003-05) </PackageDescription>
    <NDC11Code>43602-0003-05</NDC11Code>
    <ProductNDC>43602-003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210506</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals Inc</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-09-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydromorphone Hydrochloride, USP, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone Hydrochloride Tablets, USP are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of Hydromorphone Hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C17H19NO3·HCl, and it has the following chemical structure. Hydromorphone Hydrochloride, USP is a white or almost white crystalline powder that is freely soluble in water, sparingly soluble in alcohol, practically insoluble in ether. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous, microcrystalline cellulose and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&amp;C red #30 Lake dye, and D&amp;C yellow #10. The 4 mg tablets also contain D&amp;C yellow #10.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-004-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (43602-004-05) </PackageDescription>
    <NDC11Code>43602-0004-05</NDC11Code>
    <ProductNDC>43602-004</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210506</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals Inc</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-09-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydromorphone Hydrochloride, USP, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone Hydrochloride Tablets, USP are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of Hydromorphone Hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C17H19NO3·HCl, and it has the following chemical structure. Hydromorphone Hydrochloride, USP is a white or almost white crystalline powder that is freely soluble in water, sparingly soluble in alcohol, practically insoluble in ether. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous, microcrystalline cellulose and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&amp;C red #30 Lake dye, and D&amp;C yellow #10. The 4 mg tablets also contain D&amp;C yellow #10.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-176-05</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (43602-176-05)  / 500 CAPSULE in 1 BOTTLE</PackageDescription>
    <NDC11Code>43602-0176-05</NDC11Code>
    <ProductNDC>43602-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bexarotene</ProprietaryName>
    <NonProprietaryName>Bexarotene</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240906</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208628</ApplicationNumber>
    <LabelerName>Ascent pharmaceutical Inc</LabelerName>
    <SubstanceName>BEXAROTENE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240906</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bexarotene capsules are indicated for the treatment of cutaneous manifestations of cutaneous T-cell lymphoma in patients who are refractory to at least one prior systemic therapy.</IndicationAndUsage>
    <Description>Bexarotene capsules contain bexarotene, a member of a subclass of retinoids that selectively activate retinoid X receptors (RXRs). These retinoid receptors have biologic activity distinct from that of retinoic acid receptors (RARs). The chemical name of bexarotene is 4-[1-(5,6,7,8-tetrahydro-3,5,5,8,8-pentamethyl-2-naphthalenyl) ethenyl] benzoic acid, and the structural formula is as follows. Bexarotene is an off-white to white powder with a molecular weight of 348.48 and a molecular formula of C24H28O2. It is insoluble in water and slightly soluble in vegetable oils and ethanol, USP. Each bexarotene capsule contains 75 mg of bexarotene for oral administration. It also contains the following inactive ingredients: butylated hydroxyanisole, polyethylene glycol 400, polysorbate 20 and povidone. The capsule shell contains gelatin, glycerin, sorbitol sorbitan solution and opatint white. The opacode WB black ink contains ferrosoferric oxide, hypromellose, and propylene glycol. The composition of opatint white contain titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-177-05</NDCCode>
    <PackageDescription>500 mL in 1 BOTTLE (43602-177-05) </PackageDescription>
    <NDC11Code>43602-0177-05</NDC11Code>
    <ProductNDC>43602-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
    <NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207417</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>METHYLPHENIDATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2021-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Attention Deficit Disorders, Narcolepsy. Attention Deficit Disorders (previously known as Minimal Brain Dysfunction in Children). Other terms being used to describe the behavioral syndrome below include: Hyperkinetic Child Syndrome, Minimal Brain Damage, Minimal Cerebral Dysfunction, Minor Cerebral Dysfunction. Methylphenidate hydrochloride is indicated as an integral part of a total treatment program which typically includes other remedial measures (psychological, educational, social) for a stabilizing effect in children with a behavioral syndrome characterized by the following group of developmentally inappropriate symptoms: moderate-to-severe distractibility, short attention span, hyperactivity, emotional lability, and impulsivity. The diagnosis of this syndrome should not be made with finality when these symptoms are only of comparatively recent origin. Nonlocalizing (soft) neurological signs, learning disability, and abnormal EEG may or may not be present, and a diagnosis of central nervous system dysfunction may or may not be warranted. Special Diagnostic Considerations. Specific etiology of this syndrome is unknown, and there is no single diagnostic test. Adequate diagnosis requires the use not only of medical but of special psychological, educational, and social resources. Characteristics commonly reported include: chronic history of short attention span, distractibility, emotional lability, impulsivity, and moderate-to-severe hyperactivity; minor neurological signs and abnormal EEG. Learning may or may not be impaired. The diagnosis must be based upon a complete history and evaluation of the child and not solely on the presence of one or more of these characteristics. Drug treatment is not indicated for all children with this syndrome. Stimulants are not intended for use in the child who exhibits symptoms secondary to environmental factors and/or primary psychiatric disorders, including psychosis. Appropriate educational placement is essential and psychosocial intervention is generally necessary. When remedial measures alone are insufficient, the decision to prescribe stimulant medication will depend upon the physician's assessment of the chronicity and severity of the child's symptoms.</IndicationAndUsage>
    <Description>Methylphenidate hydrochloride oral solution is a mild central nervous system (CNS) stimulant available as 5 mg/5 mL and 10 mg/5 mL oral solutions for oral administration. Methylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride, USP is a white to off white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Each mL of methylphenidate hydrochloride oral solution 5 mg/5 mL contains 1 mg of methylphenidate hydrochloride, USP. Each mL of methylphenidate hydrochloride oral solution 10 mg/5 mL contains 2 mg of methylphenidate hydrochloride, USP. In addition, methylphenidate hydrochloride oral solution also contains the following inactive ingredients: diluted hydrochloric acid, glycerin, polyethylene glycol, grape flavor and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-178-05</NDCCode>
    <PackageDescription>500 mL in 1 BOTTLE (43602-178-05) </PackageDescription>
    <NDC11Code>43602-0178-05</NDC11Code>
    <ProductNDC>43602-178</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylphenidate Hydrochloride</ProprietaryName>
    <NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207417</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>METHYLPHENIDATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2021-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Attention Deficit Disorders, Narcolepsy. Attention Deficit Disorders (previously known as Minimal Brain Dysfunction in Children). Other terms being used to describe the behavioral syndrome below include: Hyperkinetic Child Syndrome, Minimal Brain Damage, Minimal Cerebral Dysfunction, Minor Cerebral Dysfunction. Methylphenidate hydrochloride is indicated as an integral part of a total treatment program which typically includes other remedial measures (psychological, educational, social) for a stabilizing effect in children with a behavioral syndrome characterized by the following group of developmentally inappropriate symptoms: moderate-to-severe distractibility, short attention span, hyperactivity, emotional lability, and impulsivity. The diagnosis of this syndrome should not be made with finality when these symptoms are only of comparatively recent origin. Nonlocalizing (soft) neurological signs, learning disability, and abnormal EEG may or may not be present, and a diagnosis of central nervous system dysfunction may or may not be warranted. Special Diagnostic Considerations. Specific etiology of this syndrome is unknown, and there is no single diagnostic test. Adequate diagnosis requires the use not only of medical but of special psychological, educational, and social resources. Characteristics commonly reported include: chronic history of short attention span, distractibility, emotional lability, impulsivity, and moderate-to-severe hyperactivity; minor neurological signs and abnormal EEG. Learning may or may not be impaired. The diagnosis must be based upon a complete history and evaluation of the child and not solely on the presence of one or more of these characteristics. Drug treatment is not indicated for all children with this syndrome. Stimulants are not intended for use in the child who exhibits symptoms secondary to environmental factors and/or primary psychiatric disorders, including psychosis. Appropriate educational placement is essential and psychosocial intervention is generally necessary. When remedial measures alone are insufficient, the decision to prescribe stimulant medication will depend upon the physician's assessment of the chronicity and severity of the child's symptoms.</IndicationAndUsage>
    <Description>Methylphenidate hydrochloride oral solution is a mild central nervous system (CNS) stimulant available as 5 mg/5 mL and 10 mg/5 mL oral solutions for oral administration. Methylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride, USP is a white to off white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Each mL of methylphenidate hydrochloride oral solution 5 mg/5 mL contains 1 mg of methylphenidate hydrochloride, USP. Each mL of methylphenidate hydrochloride oral solution 10 mg/5 mL contains 2 mg of methylphenidate hydrochloride, USP. In addition, methylphenidate hydrochloride oral solution also contains the following inactive ingredients: diluted hydrochloric acid, glycerin, polyethylene glycol, grape flavor and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-266-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-266-05) </PackageDescription>
    <NDC11Code>43602-0266-05</NDC11Code>
    <ProductNDC>43602-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-267-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-267-05) </PackageDescription>
    <NDC11Code>43602-0267-05</NDC11Code>
    <ProductNDC>43602-267</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>12</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-268-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-268-05) </PackageDescription>
    <NDC11Code>43602-0268-05</NDC11Code>
    <ProductNDC>43602-268</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>16</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-269-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-269-05) </PackageDescription>
    <NDC11Code>43602-0269-05</NDC11Code>
    <ProductNDC>43602-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>32</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-283-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-283-05) </PackageDescription>
    <NDC11Code>43602-0283-05</NDC11Code>
    <ProductNDC>43602-283</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214422</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH EXTENDED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
    <Description>Potassium Chloride Extended-Release Tablets, USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 750 mg of microencapsulated potassium chloride, equivalent to 10 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 15 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,125 mg of microencapsulated potassium chloride, equivalent to 15 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,500 mg of microencapsulated potassium chloride, equivalent to 20 mEq K of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended-Release Tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended-Release Tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended-Release Tablets, USP begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within one minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients: croscarmellose sodium, ethylcellulose and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP. FDA approved sample preparation in the assay differs from USP test.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-284-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-284-05) </PackageDescription>
    <NDC11Code>43602-0284-05</NDC11Code>
    <ProductNDC>43602-284</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214422</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>1125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH EXTENDED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
    <Description>Potassium Chloride Extended-Release Tablets, USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 750 mg of microencapsulated potassium chloride, equivalent to 10 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 15 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,125 mg of microencapsulated potassium chloride, equivalent to 15 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,500 mg of microencapsulated potassium chloride, equivalent to 20 mEq K of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended-Release Tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended-Release Tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended-Release Tablets, USP begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within one minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients: croscarmellose sodium, ethylcellulose and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP. FDA approved sample preparation in the assay differs from USP test.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-285-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-285-05) </PackageDescription>
    <NDC11Code>43602-0285-05</NDC11Code>
    <ProductNDC>43602-285</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214422</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>1500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH EXTENDED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
    <Description>Potassium Chloride Extended-Release Tablets, USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 750 mg of microencapsulated potassium chloride, equivalent to 10 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 15 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,125 mg of microencapsulated potassium chloride, equivalent to 15 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,500 mg of microencapsulated potassium chloride, equivalent to 20 mEq K of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended-Release Tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended-Release Tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended-Release Tablets, USP begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within one minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients: croscarmellose sodium, ethylcellulose and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP. FDA approved sample preparation in the assay differs from USP test.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-291-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (43602-291-05) </PackageDescription>
    <NDC11Code>43602-0291-05</NDC11Code>
    <ProductNDC>43602-291</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Icosapent Ethyl</ProprietaryName>
    <NonProprietaryName>Icosapent Ethyl</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220902</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216811</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc</LabelerName>
    <SubstanceName>ICOSAPENT ETHYL</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220902</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Icosapent ethyl capsules are indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥ 500 mg/dL) hypertriglyceridemia.</IndicationAndUsage>
    <Description>Icosapent ethyl capsules, a lipid-regulating agent, is supplied as either a 0.5 gram or a 1 gram liquid-filled clear, transparent soft gelatin capsules containing clear to light yellow colored solution for oral use. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl (in a 0.5 gram capsule) or 1 gram of icosapent ethyl (in a 1 gram capsule). Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.50. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Icosapent ethyl capsules also contain the following inactive ingredients: bloom gelatin, glycerin, alpha tocopherol, medium chain triglycerides, and lecithin. The capsules are imprinted with white imprinting ink containing titanium dioxide, propylene glycol, and hypromellose 2910.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-294-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-294-05) </PackageDescription>
    <NDC11Code>43602-0294-05</NDC11Code>
    <ProductNDC>43602-294</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paliperidone</ProprietaryName>
    <NonProprietaryName>Paliperidone</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230823</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216174</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PALIPERIDONE</SubstanceName>
    <StrengthNumber>1.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230823</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Paliperidone extended-release tablets contain paliperidone, USP an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone extended-release tablets contain a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.48. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (beige), 3 mg (pink), 6 mg (beige), and 9 mg (yellow) strengths. Paliperidone extended-release tablets utilize OROS® osmotic drug-release technology. Inactive ingredients are lactose monohydrate, sodium chloride, hydroxypropyl methyl cellulose, polyethylene oxides, stearic acid, FD &amp; C Red No. 40, povidone, magnesium stearate, hydroxypropyl cellulose, cellulose acetate, polyethylene glycol, ferrosoferric oxide, propylene glycol, and titanium dioxide. The 1.5 mg and 6 mg strengths also contain iron oxide yellow and iron oxide red. The 3 mg strength also contain iron oxide red. The 9 mg strength also contain iron oxide yellow and polysorbate 80. Delivery System Components and Performance. Paliperidone extended-release tablets use osmotic pressure to deliver paliperidone at a controlled rate. The delivery system, which resembles a capsule-shaped tablet in appearance, consists of an osmotically active trilayer core surrounded by a subcoat and semipermeable membrane. The trilayer core is composed of two drug layers containing the drug and excipients, and a push layer containing osmotically active components. There are two precision laser-drilled orifices on the drug-layer dome of the tablet. Each tablet strength has a different colored water-dispersible overcoat and print markings. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible color overcoat erodes quickly. Water then enters the tablet through the semipermeable membrane that controls the rate at which water enters the tablet core, which, in turn, determines the rate of drug delivery. The hydrophilic polymers of the core hydrate and swell, creating a gel containing paliperidone that is then pushed out through the tablet orifices. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the stool as a tablet shell, along with insoluble core components.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-295-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-295-05) </PackageDescription>
    <NDC11Code>43602-0295-05</NDC11Code>
    <ProductNDC>43602-295</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paliperidone</ProprietaryName>
    <NonProprietaryName>Paliperidone</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230823</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216174</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PALIPERIDONE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230823</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Paliperidone extended-release tablets contain paliperidone, USP an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone extended-release tablets contain a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.48. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (beige), 3 mg (pink), 6 mg (beige), and 9 mg (yellow) strengths. Paliperidone extended-release tablets utilize OROS® osmotic drug-release technology. Inactive ingredients are lactose monohydrate, sodium chloride, hydroxypropyl methyl cellulose, polyethylene oxides, stearic acid, FD &amp; C Red No. 40, povidone, magnesium stearate, hydroxypropyl cellulose, cellulose acetate, polyethylene glycol, ferrosoferric oxide, propylene glycol, and titanium dioxide. The 1.5 mg and 6 mg strengths also contain iron oxide yellow and iron oxide red. The 3 mg strength also contain iron oxide red. The 9 mg strength also contain iron oxide yellow and polysorbate 80. Delivery System Components and Performance. Paliperidone extended-release tablets use osmotic pressure to deliver paliperidone at a controlled rate. The delivery system, which resembles a capsule-shaped tablet in appearance, consists of an osmotically active trilayer core surrounded by a subcoat and semipermeable membrane. The trilayer core is composed of two drug layers containing the drug and excipients, and a push layer containing osmotically active components. There are two precision laser-drilled orifices on the drug-layer dome of the tablet. Each tablet strength has a different colored water-dispersible overcoat and print markings. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible color overcoat erodes quickly. Water then enters the tablet through the semipermeable membrane that controls the rate at which water enters the tablet core, which, in turn, determines the rate of drug delivery. The hydrophilic polymers of the core hydrate and swell, creating a gel containing paliperidone that is then pushed out through the tablet orifices. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the stool as a tablet shell, along with insoluble core components.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-296-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-296-05) </PackageDescription>
    <NDC11Code>43602-0296-05</NDC11Code>
    <ProductNDC>43602-296</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paliperidone</ProprietaryName>
    <NonProprietaryName>Paliperidone</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230823</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216174</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PALIPERIDONE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230823</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Paliperidone extended-release tablets contain paliperidone, USP an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone extended-release tablets contain a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.48. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (beige), 3 mg (pink), 6 mg (beige), and 9 mg (yellow) strengths. Paliperidone extended-release tablets utilize OROS® osmotic drug-release technology. Inactive ingredients are lactose monohydrate, sodium chloride, hydroxypropyl methyl cellulose, polyethylene oxides, stearic acid, FD &amp; C Red No. 40, povidone, magnesium stearate, hydroxypropyl cellulose, cellulose acetate, polyethylene glycol, ferrosoferric oxide, propylene glycol, and titanium dioxide. The 1.5 mg and 6 mg strengths also contain iron oxide yellow and iron oxide red. The 3 mg strength also contain iron oxide red. The 9 mg strength also contain iron oxide yellow and polysorbate 80. Delivery System Components and Performance. Paliperidone extended-release tablets use osmotic pressure to deliver paliperidone at a controlled rate. The delivery system, which resembles a capsule-shaped tablet in appearance, consists of an osmotically active trilayer core surrounded by a subcoat and semipermeable membrane. The trilayer core is composed of two drug layers containing the drug and excipients, and a push layer containing osmotically active components. There are two precision laser-drilled orifices on the drug-layer dome of the tablet. Each tablet strength has a different colored water-dispersible overcoat and print markings. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible color overcoat erodes quickly. Water then enters the tablet through the semipermeable membrane that controls the rate at which water enters the tablet core, which, in turn, determines the rate of drug delivery. The hydrophilic polymers of the core hydrate and swell, creating a gel containing paliperidone that is then pushed out through the tablet orifices. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the stool as a tablet shell, along with insoluble core components.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-297-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-297-05) </PackageDescription>
    <NDC11Code>43602-0297-05</NDC11Code>
    <ProductNDC>43602-297</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paliperidone</ProprietaryName>
    <NonProprietaryName>Paliperidone</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230823</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216174</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PALIPERIDONE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230823</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Paliperidone extended-release tablets contain paliperidone, USP an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone extended-release tablets contain a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.48. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (beige), 3 mg (pink), 6 mg (beige), and 9 mg (yellow) strengths. Paliperidone extended-release tablets utilize OROS® osmotic drug-release technology. Inactive ingredients are lactose monohydrate, sodium chloride, hydroxypropyl methyl cellulose, polyethylene oxides, stearic acid, FD &amp; C Red No. 40, povidone, magnesium stearate, hydroxypropyl cellulose, cellulose acetate, polyethylene glycol, ferrosoferric oxide, propylene glycol, and titanium dioxide. The 1.5 mg and 6 mg strengths also contain iron oxide yellow and iron oxide red. The 3 mg strength also contain iron oxide red. The 9 mg strength also contain iron oxide yellow and polysorbate 80. Delivery System Components and Performance. Paliperidone extended-release tablets use osmotic pressure to deliver paliperidone at a controlled rate. The delivery system, which resembles a capsule-shaped tablet in appearance, consists of an osmotically active trilayer core surrounded by a subcoat and semipermeable membrane. The trilayer core is composed of two drug layers containing the drug and excipients, and a push layer containing osmotically active components. There are two precision laser-drilled orifices on the drug-layer dome of the tablet. Each tablet strength has a different colored water-dispersible overcoat and print markings. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible color overcoat erodes quickly. Water then enters the tablet through the semipermeable membrane that controls the rate at which water enters the tablet core, which, in turn, determines the rate of drug delivery. The hydrophilic polymers of the core hydrate and swell, creating a gel containing paliperidone that is then pushed out through the tablet orifices. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the stool as a tablet shell, along with insoluble core components.</Description>
  </NDC>
</NDCList>