{
"NDC": [
{
"NDCCode": "44567-662-10",
"PackageDescription": "10 BAG in 1 CARTON (44567-662-10) / 100 mL in 1 BAG (44567-662-01) ",
"NDC11Code": "44567-0662-10",
"ProductNDC": "44567-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride In Sodium Chloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA218038",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250321",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium-channel blocker indicated for the following: 1 Temporary control of rapid ventricular rate in atrial fibrillation or atrial flutter. (1.1), 2 Rapid conversion of paroxysmal supraventricular tachycardias (PSVT) to sinus rhythm. (1.2).",
"Description": "Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium channel-blocker. Diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis- with the molecular weight of 450.98 and structural formula. Molecular formula: C22H26N204S.HCl. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste soluble in water, methanol, and chloroform. Diltiazem Hydrochloride in Sodium Chloride Injection is a clear, colorless, sterile, nonpyrogenic, isotonic solution for intravenous use only. It is packaged in single-dose bags containing 100 mg/100 mL and 250 mg/250 mL. Each mL contains: 1 mg diltiazem hydrochloride, USP (equivalent to 0.92 mg diltiazem), 0.15 mg citric acid monohydrate, USP, 7.2 mg sodium chloride, USP, 0.13 mg sodium citrate dihydrate, USP, 10 mg sorbitol, NF, and water for injection, USP. Hydrochloric acid, NF and/or sodium hydroxide are added as needed to adjust pH to 4.5 - 5.5."
},
{
"NDCCode": "13811-662-10",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 CARTON (13811-662-10)",
"NDC11Code": "13811-0662-10",
"ProductNDC": "13811-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202949",
"LabelerName": "Trigen Laboratories, LLC",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-11-22"
},
{
"NDCCode": "25021-662-05",
"PackageDescription": "10 VIAL in 1 CARTON (25021-662-05) / 5 mL in 1 VIAL",
"NDC11Code": "25021-0662-05",
"ProductNDC": "25021-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20111220",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091458",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20111220",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is:. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains rocuronium bromide, 10 mg; sodium acetate trihydrate, 2 mg; and sodium chloride; 3.3 mg. Adjusted to pH of 4 with glacial acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "25021-662-10",
"PackageDescription": "10 VIAL in 1 CARTON (25021-662-10) > 10 mL in 1 VIAL",
"NDC11Code": "25021-0662-10",
"ProductNDC": "25021-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20111220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091458",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20111220",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is:. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains rocuronium bromide, 10 mg; sodium acetate trihydrate, 2 mg; and sodium chloride; 3.3 mg. Adjusted to pH of 4 with glacial acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "43063-662-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (43063-662-10) ",
"NDC11Code": "43063-0662-10",
"ProductNDC": "43063-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202640",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC],Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160906",
"SamplePackage": "N"
},
{
"NDCCode": "47781-662-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (47781-662-10) ",
"NDC11Code": "47781-0662-10",
"ProductNDC": "47781-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021116",
"LabelerName": "Alvogen, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190507",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "61919-662-10",
"PackageDescription": "10 mL in 1 BOTTLE, DROPPER (61919-662-10) ",
"NDC11Code": "61919-0662-10",
"ProductNDC": "61919-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates And Hydrocortisone",
"NonProprietaryName": "Neomycin And Polymyxin B Sulfates And Hydrocortisone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064065",
"LabelerName": "DIRECT RX",
"SubstanceName": "HYDROCORTISONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "10; 3.5; 10000",
"StrengthUnit": "mg/mL; mg/mL; [USP'U]/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140101",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of superficial bacterial infections of the external auditory canal caused by organisms susceptible to the action of the antibiotics, and for the treatment of infections of mastoidectomy and fenestration cavities caused by organisms susceptible to the antibiotics.",
"Description": "Neomycin and Polymyxin B Sulfates and Hydrocortisone Otic Suspension USP is a sterile antibacterial and anti-inflammatory suspension for otic use. Neomycin Sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600 micrograms of neomycin standard per milligram, calculated on an anhydrous basis. The structural formulae are. [Neomycin Sulfate (structural formula)]. Polymyxin B Sulfate is the sulfate salt of polymyxin B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per milligram, calculated on an anhydrous basis. The structural formulae are. [Polymyxin B Sulfate (structural formula)]. Hydrocortisone 11β,17, 21-trihydroxypregn-4-ene-3,20-dione, is an anti-inflammatory hormone. Its structural formula is. [Hydrocortisone (structural formula)]. C21H30O5. Mol. Wt. 362.47. Each mL Contains. ACTIVES: Hydrocortisone, 10 mg (1%), Neomycin Sulfate equivalent to 3.5 mg neomycin base, Polymyxin B Sulfate, equal to 10,000 polymyxin B units; INACTIVES: Cetyl Alcohol (0.9%), Polysorbate 80, Propylene Glycol, Purified Water. Sulfuric Acid may be added to adjust pH (3.0 - 7.0). PRESERVATIVE ADDED: Thimerosal 0.01%."
},
{
"NDCCode": "63187-662-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (63187-662-10) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "63187-0662-10",
"ProductNDC": "63187-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20080701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076407",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Active",
"LastUpdate": "2022-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:.",
"Description": "Ofloxacin Ophthalmic Solution USP, 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. Chemical Name: (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains: Active: ofloxacin 0.3% (3 mg/mL);. Preservative: benzalkonium chloride (0.005%);. Inactives: sodium chloride and water for injection. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin Ophthalmic Solution USP, 0.3% is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure."
},
{
"NDCCode": "65841-662-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (65841-662-10) ",
"NDC11Code": "65841-0662-10",
"ProductNDC": "65841-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040874",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080522",
"SamplePackage": "N"
},
{
"NDCCode": "65841-662-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65841-662-30) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "65841-0662-30",
"ProductNDC": "65841-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040874",
"LabelerName": "Cadila Healthcare Limited",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20080522",
"SamplePackage": "N"
},
{
"NDCCode": "65841-662-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65841-662-77) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "65841-0662-77",
"ProductNDC": "65841-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040874",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080522",
"SamplePackage": "N"
},
{
"NDCCode": "65862-662-78",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65862-662-78) / 10 TABLET in 1 BLISTER PACK (65862-662-10) ",
"NDC11Code": "65862-0662-78",
"ProductNDC": "65862-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203908",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151008",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder.",
"Description": "Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets USP. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition the 2 mg strength contains FD&C Blue No. 2 and ferric oxide (sicovit yellow 10) and 5 mg contains FD&C Blue No. 2."
},
{
"NDCCode": "67172-662-51",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (67172-662-51) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "67172-0662-51",
"ProductNDC": "67172-662",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Murine For Earache Relief",
"NonProprietaryName": "Chamomila, Mercurius Solubilis, Sulphur And Lycopodium Clavatum",
"DosageFormName": "LIQUID",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Prestige Brands Holdings, Inc.",
"SubstanceName": "LYCOPODIUM CLAVATUM SPORE; MATRICARIA RECUTITA; MERCURIUS SOLUBILIS; SULFUR",
"StrengthNumber": "8; 10; 15; 12",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2014-04-03"
},
{
"NDCCode": "68382-662-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68382-662-10) ",
"NDC11Code": "68382-0662-10",
"ProductNDC": "68382-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205936",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180815",
"SamplePackage": "N",
"IndicationAndUsage": "Spironolactone is an aldosterone antagonist indicated for: : 1 The treatment of NYHA Class III-IV heart failure and reduced ejection fraction to increase survival, manage edema, and to reduce the need for hospitalization for heart failure (1.1)., 2 Use as an add-on therapy for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.2)., 3 The management of edema in adult patients who are cirrhotic when edema is not responsive to fluid and sodium restrictions and in the setting of nephrotic syndrome when treatment of the underlying disease, restriction of fluid and sodium intake, and the use of other diuretics produce an inadequate response (1.3)., 4 Treatment of primary hyperaldosternism for: (1.4)Short-term preoperative treatmentLong-term maintenance for patients with discrete aldosterone-producing adrenal adenomas who are not candidates for surgery and patients with bilateral micro or macronodular adrenal hyperplasia.",
"Description": "Spironolactone tablets, USP contain 25 mg, 50 mg, or 100 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone acetate, which has the following structural formula. Spironolactone, USP is practically insoluble in water, soluble in ethyl acetate and alcohol, freely soluble in benzene and in chloroform, slightly soluble in menthanol and very slightly soluble in fixed oils. Inactive ingredients include calcium sulfate dihydrate, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, peppermint flavor, povidone and sodium lauryl sulfate. Additionally each tablet contains opadry II white 33F28398 which contains hydroxylpropyl methyl cellulose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide."
},
{
"NDCCode": "68382-662-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-662-30) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "68382-0662-30",
"ProductNDC": "68382-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spironolactone",
"NonProprietaryName": "Spironolactone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205936",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "SPIRONOLACTONE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180815",
"SamplePackage": "N",
"IndicationAndUsage": "Spironolactone is an aldosterone antagonist indicated for: : 1 The treatment of NYHA Class III-IV heart failure and reduced ejection fraction to increase survival, manage edema, and to reduce the need for hospitalization for heart failure (1.1)., 2 Use as an add-on therapy for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.2)., 3 The management of edema in adult patients who are cirrhotic when edema is not responsive to fluid and sodium restrictions and in the setting of nephrotic syndrome when treatment of the underlying disease, restriction of fluid and sodium intake, and the use of other diuretics produce an inadequate response (1.3)., 4 Treatment of primary hyperaldosternism for: (1.4)Short-term preoperative treatmentLong-term maintenance for patients with discrete aldosterone-producing adrenal adenomas who are not candidates for surgery and patients with bilateral micro or macronodular adrenal hyperplasia.",
"Description": "Spironolactone tablets, USP contain 25 mg, 50 mg, or 100 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone acetate, which has the following structural formula. Spironolactone, USP is practically insoluble in water, soluble in ethyl acetate and alcohol, freely soluble in benzene and in chloroform, slightly soluble in menthanol and very slightly soluble in fixed oils. Inactive ingredients include calcium sulfate dihydrate, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, peppermint flavor, povidone and sodium lauryl sulfate. Additionally each tablet contains opadry II white 33F28398 which contains hydroxylpropyl methyl cellulose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide."
},
{
"NDCCode": "69842-662-10",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (69842-662-10) / 10 LOZENGE in 1 BOTTLE, PLASTIC",
"NDC11Code": "69842-0662-10",
"ProductNDC": "69842-662",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine",
"ProprietaryNameSuffix": "Sugar Free",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20200529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207868",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200529",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "70069-662-10",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (70069-662-10) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "70069-0662-10",
"ProductNDC": "70069-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nalbuphine Hydrochloride",
"NonProprietaryName": "Nalbuphine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20240926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216049",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "NALBUPHINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240926",
"SamplePackage": "N",
"IndicationAndUsage": "Nalbuphine hydrochloride injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine hydrochloride injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve nalbuphine hydrochloride injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Nalbuphine hydrochloride injection is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)- 4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL @ 25ºC) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 · HCl. The structural formula is. Nalbuphine hydrochloride injection is a sterile solution suitable for subcutaneous, intramuscular, or intravenous injection. Nalbuphine hydrochloride injection is available in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride injection per mL. Both strengths in 10 mL vials contain 0.94% sodium citrate dihydrate, 1.26% citric acid anhydrous, and 0.2% of a 9:1 mixture of methylparaben and propylparaben as preservatives; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride. Nalbuphine hydrochloride injection is also available in ampuls in a sterile, paraben-free formulation in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride per mL. One mL of each strength contains 0.94% sodium citrate dihydrate, and 1.26% citric acid anhydrous; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride."
},
{
"NDCCode": "70954-662-10",
"PackageDescription": "120 mL in 1 BOTTLE, PLASTIC (70954-662-10) ",
"NDC11Code": "70954-0662-10",
"ProductNDC": "70954-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoconazole",
"NonProprietaryName": "Ketoconazole",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218498",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "KETOCONAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240916",
"SamplePackage": "N",
"IndicationAndUsage": "Ketoconazole shampoo, 2% is indicated for the treatment of tinea (pityriasis) versicolor caused by or presumed to be caused by Pityrosporum orbiculare (also known as Malassezia furfur or M. orbiculare). Note: Tinea (pityriasis) versicolor may give rise to hyperpigmented or hypopigmented patches on the trunk which may extend to the neck, arms and upper thighs. Treatment of the infection may not immediately result in normalization of pigment to the affected sites. Normalization of pigment following successful therapy is variable and may take months, depending on individual skin type and incidental sun exposure. Although tinea versicolor is not contagious, it may recur because the organism that causes the disease is part of the normal skin flora.",
"Description": "Ketoconazole Shampoo, 2% is a red-orange color liquid for topical application, containing the broad spectrum synthetic antifungal agent ketoconazole in a concentration of 2% in an aqueous suspension. It also contains: coconut fatty acid diethanolamide, disodium laureth sulfosuccinate, FD&C Red No. 40, hydrochloric acid, imidurea, PEG-120 methyl glucose dioleate, purified water, sodium chloride, sodium hydroxide, and sodium lauryl ether sulfate. Ketoconazole is cis-1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]piperazine and has the following structural formula."
},
{
"NDCCode": "71052-662-10",
"PackageDescription": "100 g in 1 CONTAINER (71052-662-10) ",
"NDC11Code": "71052-0662-10",
"ProductNDC": "71052-662",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Danazol",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200527",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "DANAZOL",
"StrengthNumber": "1000",
"StrengthUnit": "g/1000g",
"Status": "Unfinished",
"LastUpdate": "2026-01-07",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19-JUN-20"
},
{
"NDCCode": "71205-662-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (71205-662-10) ",
"NDC11Code": "71205-0662-10",
"ProductNDC": "71205-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benzonatate",
"NonProprietaryName": "Benzonatate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091310",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "BENZONATATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Tracheobronchial Stretch Receptor Activity [PE], Non-narcotic Antitussive [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220520",
"SamplePackage": "N",
"IndicationAndUsage": "Benzonatate capsules USP are indicated for the symptomatic relief of cough.",
"Description": "Benzonatate, a non-narcotic oral antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26-nonaoxaoctacosan- 28-yl p-(butylamino) benzoate; with a molecular weight of 603.0. Each benzonatate capsule USP, 100 mg contains: Benzonatate, USP 100 mg. Benzonatate capsules USP also contain: gelatin 175 bloom bone NF, glycerin 99% USP, methyl/propyl paraben blend (4:1 ), yellow #10-DC and white ink (shellac glaze in SD-45, titanium dioxide, isopropyl alcohol, n-butyl alcohol, propylene glycol, ammonium hydroxide and simethicone)."
},
{
"NDCCode": "71919-662-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-662-10) ",
"NDC11Code": "71919-0662-10",
"ProductNDC": "71919-662",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tamus Communis",
"NonProprietaryName": "Dioscorea Communis",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110517",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "DIOSCOREA COMMUNIS TOP",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110517",
"SamplePackage": "N"
},
{
"NDCCode": "72603-662-11",
"PackageDescription": "10 CARTON in 1 CARTON (72603-662-11) / 10 TABLET in 1 CARTON (72603-662-10) ",
"NDC11Code": "72603-0662-11",
"ProductNDC": "72603-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211417",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260820",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg and 200 mcg. Each Levothyroxine sodium tablets, USP contains the inactive ingredients croscarmellose sodium, microcrystalline cellulose, silicon dioxide and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Table 9: Levothyroxine Sodium Tablet Color Additives. * Note - FD&C Yellow No. 6 is orange in color. Levothyroxine Sodium Tablet, USP meets USP Dissolution Test 2."
},
{
"NDCCode": "44567-100-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-100-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0100-10",
"ProductNDC": "44567-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes."
},
{
"NDCCode": "44567-101-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-101-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0101-10",
"ProductNDC": "44567-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes."
},
{
"NDCCode": "44567-102-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-102-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0102-10",
"ProductNDC": "44567-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes."
},
{
"NDCCode": "44567-103-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-103-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0103-10",
"ProductNDC": "44567-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes."
},
{
"NDCCode": "44567-104-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-104-10) / 100 mL in 1 VIAL",
"NDC11Code": "44567-0104-10",
"ProductNDC": "44567-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063142",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The solution after reconstitution is clear, colorless and free from visible particulates. It has the following structural formula. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Each Ampicillin for Injection, USP pharmacy bulk package bottle contains ampicillin sodium equivalent to 10 grams of ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package)."
},
{
"NDCCode": "44567-105-10",
"PackageDescription": "10 VIAL in 1 TRAY (44567-105-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0105-10",
"ProductNDC": "44567-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062772",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120510",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes."
},
{
"NDCCode": "44567-130-10",
"PackageDescription": "10 VIAL in 1 CARTON (44567-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0130-10",
"ProductNDC": "44567-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065441",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210331",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).",
"Description": "Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "44567-131-10",
"PackageDescription": "10 VIAL in 1 CARTON (44567-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "44567-0131-10",
"ProductNDC": "44567-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065441",
"LabelerName": "WG Critical Care, LLC",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210331",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).",
"Description": "Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>44567-662-10</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (44567-662-10) / 100 mL in 1 BAG (44567-662-01) </PackageDescription>
<NDC11Code>44567-0662-10</NDC11Code>
<ProductNDC>44567-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA218038</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium-channel blocker indicated for the following: 1 Temporary control of rapid ventricular rate in atrial fibrillation or atrial flutter. (1.1), 2 Rapid conversion of paroxysmal supraventricular tachycardias (PSVT) to sinus rhythm. (1.2).</IndicationAndUsage>
<Description>Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium channel-blocker. Diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis- with the molecular weight of 450.98 and structural formula. Molecular formula: C22H26N204S.HCl. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste soluble in water, methanol, and chloroform. Diltiazem Hydrochloride in Sodium Chloride Injection is a clear, colorless, sterile, nonpyrogenic, isotonic solution for intravenous use only. It is packaged in single-dose bags containing 100 mg/100 mL and 250 mg/250 mL. Each mL contains: 1 mg diltiazem hydrochloride, USP (equivalent to 0.92 mg diltiazem), 0.15 mg citric acid monohydrate, USP, 7.2 mg sodium chloride, USP, 0.13 mg sodium citrate dihydrate, USP, 10 mg sorbitol, NF, and water for injection, USP. Hydrochloric acid, NF and/or sodium hydroxide are added as needed to adjust pH to 4.5 - 5.5.</Description>
</NDC>
<NDC>
<NDCCode>13811-662-10</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 CARTON (13811-662-10)</PackageDescription>
<NDC11Code>13811-0662-10</NDC11Code>
<ProductNDC>13811-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202949</ApplicationNumber>
<LabelerName>Trigen Laboratories, LLC</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>25021-662-05</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-662-05) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0662-05</NDC11Code>
<ProductNDC>25021-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20111220</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091458</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20111220</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is:. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains rocuronium bromide, 10 mg; sodium acetate trihydrate, 2 mg; and sodium chloride; 3.3 mg. Adjusted to pH of 4 with glacial acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>25021-662-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-662-10) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0662-10</NDC11Code>
<ProductNDC>25021-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20111220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091458</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is:. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains rocuronium bromide, 10 mg; sodium acetate trihydrate, 2 mg; and sodium chloride; 3.3 mg. Adjusted to pH of 4 with glacial acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>43063-662-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (43063-662-10) </PackageDescription>
<NDC11Code>43063-0662-10</NDC11Code>
<ProductNDC>43063-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202640</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC],Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>47781-662-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (47781-662-10) </PackageDescription>
<NDC11Code>47781-0662-10</NDC11Code>
<ProductNDC>47781-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021116</ApplicationNumber>
<LabelerName>Alvogen, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>61919-662-10</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, DROPPER (61919-662-10) </PackageDescription>
<NDC11Code>61919-0662-10</NDC11Code>
<ProductNDC>61919-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates And Hydrocortisone</ProprietaryName>
<NonProprietaryName>Neomycin And Polymyxin B Sulfates And Hydrocortisone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064065</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>HYDROCORTISONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>10; 3.5; 10000</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; [USP'U]/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of superficial bacterial infections of the external auditory canal caused by organisms susceptible to the action of the antibiotics, and for the treatment of infections of mastoidectomy and fenestration cavities caused by organisms susceptible to the antibiotics.</IndicationAndUsage>
<Description>Neomycin and Polymyxin B Sulfates and Hydrocortisone Otic Suspension USP is a sterile antibacterial and anti-inflammatory suspension for otic use. Neomycin Sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600 micrograms of neomycin standard per milligram, calculated on an anhydrous basis. The structural formulae are. [Neomycin Sulfate (structural formula)]. Polymyxin B Sulfate is the sulfate salt of polymyxin B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per milligram, calculated on an anhydrous basis. The structural formulae are. [Polymyxin B Sulfate (structural formula)]. Hydrocortisone 11β,17, 21-trihydroxypregn-4-ene-3,20-dione, is an anti-inflammatory hormone. Its structural formula is. [Hydrocortisone (structural formula)]. C21H30O5. Mol. Wt. 362.47. Each mL Contains. ACTIVES: Hydrocortisone, 10 mg (1%), Neomycin Sulfate equivalent to 3.5 mg neomycin base, Polymyxin B Sulfate, equal to 10,000 polymyxin B units; INACTIVES: Cetyl Alcohol (0.9%), Polysorbate 80, Propylene Glycol, Purified Water. Sulfuric Acid may be added to adjust pH (3.0 - 7.0). PRESERVATIVE ADDED: Thimerosal 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>63187-662-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (63187-662-10) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>63187-0662-10</NDC11Code>
<ProductNDC>63187-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20080701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076407</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:.</IndicationAndUsage>
<Description>Ofloxacin Ophthalmic Solution USP, 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. Chemical Name: (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains: Active: ofloxacin 0.3% (3 mg/mL);. Preservative: benzalkonium chloride (0.005%);. Inactives: sodium chloride and water for injection. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin Ophthalmic Solution USP, 0.3% is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure.</Description>
</NDC>
<NDC>
<NDCCode>65841-662-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (65841-662-10) </PackageDescription>
<NDC11Code>65841-0662-10</NDC11Code>
<ProductNDC>65841-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040874</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-662-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65841-662-30) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>65841-0662-30</NDC11Code>
<ProductNDC>65841-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040874</ApplicationNumber>
<LabelerName>Cadila Healthcare Limited</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-662-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65841-662-77) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>65841-0662-77</NDC11Code>
<ProductNDC>65841-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040874</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65862-662-78</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65862-662-78) / 10 TABLET in 1 BLISTER PACK (65862-662-10) </PackageDescription>
<NDC11Code>65862-0662-78</NDC11Code>
<ProductNDC>65862-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203908</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder.</IndicationAndUsage>
<Description>Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets USP. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition the 2 mg strength contains FD&C Blue No. 2 and ferric oxide (sicovit yellow 10) and 5 mg contains FD&C Blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>67172-662-51</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (67172-662-51) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>67172-0662-51</NDC11Code>
<ProductNDC>67172-662</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Murine For Earache Relief</ProprietaryName>
<NonProprietaryName>Chamomila, Mercurius Solubilis, Sulphur And Lycopodium Clavatum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Prestige Brands Holdings, Inc.</LabelerName>
<SubstanceName>LYCOPODIUM CLAVATUM SPORE; MATRICARIA RECUTITA; MERCURIUS SOLUBILIS; SULFUR</SubstanceName>
<StrengthNumber>8; 10; 15; 12</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-04-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>68382-662-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68382-662-10) </PackageDescription>
<NDC11Code>68382-0662-10</NDC11Code>
<ProductNDC>68382-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205936</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Spironolactone is an aldosterone antagonist indicated for: : 1 The treatment of NYHA Class III-IV heart failure and reduced ejection fraction to increase survival, manage edema, and to reduce the need for hospitalization for heart failure (1.1)., 2 Use as an add-on therapy for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.2)., 3 The management of edema in adult patients who are cirrhotic when edema is not responsive to fluid and sodium restrictions and in the setting of nephrotic syndrome when treatment of the underlying disease, restriction of fluid and sodium intake, and the use of other diuretics produce an inadequate response (1.3)., 4 Treatment of primary hyperaldosternism for: (1.4)Short-term preoperative treatmentLong-term maintenance for patients with discrete aldosterone-producing adrenal adenomas who are not candidates for surgery and patients with bilateral micro or macronodular adrenal hyperplasia.</IndicationAndUsage>
<Description>Spironolactone tablets, USP contain 25 mg, 50 mg, or 100 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone acetate, which has the following structural formula. Spironolactone, USP is practically insoluble in water, soluble in ethyl acetate and alcohol, freely soluble in benzene and in chloroform, slightly soluble in menthanol and very slightly soluble in fixed oils. Inactive ingredients include calcium sulfate dihydrate, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, peppermint flavor, povidone and sodium lauryl sulfate. Additionally each tablet contains opadry II white 33F28398 which contains hydroxylpropyl methyl cellulose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68382-662-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-662-30) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68382-0662-30</NDC11Code>
<ProductNDC>68382-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spironolactone</ProprietaryName>
<NonProprietaryName>Spironolactone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205936</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>SPIRONOLACTONE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Spironolactone is an aldosterone antagonist indicated for: : 1 The treatment of NYHA Class III-IV heart failure and reduced ejection fraction to increase survival, manage edema, and to reduce the need for hospitalization for heart failure (1.1)., 2 Use as an add-on therapy for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.2)., 3 The management of edema in adult patients who are cirrhotic when edema is not responsive to fluid and sodium restrictions and in the setting of nephrotic syndrome when treatment of the underlying disease, restriction of fluid and sodium intake, and the use of other diuretics produce an inadequate response (1.3)., 4 Treatment of primary hyperaldosternism for: (1.4)Short-term preoperative treatmentLong-term maintenance for patients with discrete aldosterone-producing adrenal adenomas who are not candidates for surgery and patients with bilateral micro or macronodular adrenal hyperplasia.</IndicationAndUsage>
<Description>Spironolactone tablets, USP contain 25 mg, 50 mg, or 100 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone acetate, which has the following structural formula. Spironolactone, USP is practically insoluble in water, soluble in ethyl acetate and alcohol, freely soluble in benzene and in chloroform, slightly soluble in menthanol and very slightly soluble in fixed oils. Inactive ingredients include calcium sulfate dihydrate, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, peppermint flavor, povidone and sodium lauryl sulfate. Additionally each tablet contains opadry II white 33F28398 which contains hydroxylpropyl methyl cellulose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69842-662-10</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (69842-662-10) / 10 LOZENGE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>69842-0662-10</NDC11Code>
<ProductNDC>69842-662</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine</ProprietaryName>
<ProprietaryNameSuffix>Sugar Free</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207868</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70069-662-10</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (70069-662-10) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>70069-0662-10</NDC11Code>
<ProductNDC>70069-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nalbuphine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nalbuphine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216049</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>NALBUPHINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nalbuphine hydrochloride injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine hydrochloride injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve nalbuphine hydrochloride injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Nalbuphine hydrochloride injection is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)- 4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL @ 25ºC) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 · HCl. The structural formula is. Nalbuphine hydrochloride injection is a sterile solution suitable for subcutaneous, intramuscular, or intravenous injection. Nalbuphine hydrochloride injection is available in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride injection per mL. Both strengths in 10 mL vials contain 0.94% sodium citrate dihydrate, 1.26% citric acid anhydrous, and 0.2% of a 9:1 mixture of methylparaben and propylparaben as preservatives; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride. Nalbuphine hydrochloride injection is also available in ampuls in a sterile, paraben-free formulation in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride per mL. One mL of each strength contains 0.94% sodium citrate dihydrate, and 1.26% citric acid anhydrous; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride.</Description>
</NDC>
<NDC>
<NDCCode>70954-662-10</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE, PLASTIC (70954-662-10) </PackageDescription>
<NDC11Code>70954-0662-10</NDC11Code>
<ProductNDC>70954-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoconazole</ProprietaryName>
<NonProprietaryName>Ketoconazole</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218498</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>KETOCONAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ketoconazole shampoo, 2% is indicated for the treatment of tinea (pityriasis) versicolor caused by or presumed to be caused by Pityrosporum orbiculare (also known as Malassezia furfur or M. orbiculare). Note: Tinea (pityriasis) versicolor may give rise to hyperpigmented or hypopigmented patches on the trunk which may extend to the neck, arms and upper thighs. Treatment of the infection may not immediately result in normalization of pigment to the affected sites. Normalization of pigment following successful therapy is variable and may take months, depending on individual skin type and incidental sun exposure. Although tinea versicolor is not contagious, it may recur because the organism that causes the disease is part of the normal skin flora.</IndicationAndUsage>
<Description>Ketoconazole Shampoo, 2% is a red-orange color liquid for topical application, containing the broad spectrum synthetic antifungal agent ketoconazole in a concentration of 2% in an aqueous suspension. It also contains: coconut fatty acid diethanolamide, disodium laureth sulfosuccinate, FD&C Red No. 40, hydrochloric acid, imidurea, PEG-120 methyl glucose dioleate, purified water, sodium chloride, sodium hydroxide, and sodium lauryl ether sulfate. Ketoconazole is cis-1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]piperazine and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>71052-662-10</NDCCode>
<PackageDescription>100 g in 1 CONTAINER (71052-662-10) </PackageDescription>
<NDC11Code>71052-0662-10</NDC11Code>
<ProductNDC>71052-662</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Danazol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200527</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>DANAZOL</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>g/1000g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-01-07</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19-JUN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71205-662-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (71205-662-10) </PackageDescription>
<NDC11Code>71205-0662-10</NDC11Code>
<ProductNDC>71205-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benzonatate</ProprietaryName>
<NonProprietaryName>Benzonatate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091310</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>BENZONATATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Tracheobronchial Stretch Receptor Activity [PE], Non-narcotic Antitussive [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Benzonatate capsules USP are indicated for the symptomatic relief of cough.</IndicationAndUsage>
<Description>Benzonatate, a non-narcotic oral antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26-nonaoxaoctacosan- 28-yl p-(butylamino) benzoate; with a molecular weight of 603.0. Each benzonatate capsule USP, 100 mg contains: Benzonatate, USP 100 mg. Benzonatate capsules USP also contain: gelatin 175 bloom bone NF, glycerin 99% USP, methyl/propyl paraben blend (4:1 ), yellow #10-DC and white ink (shellac glaze in SD-45, titanium dioxide, isopropyl alcohol, n-butyl alcohol, propylene glycol, ammonium hydroxide and simethicone).</Description>
</NDC>
<NDC>
<NDCCode>71919-662-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-662-10) </PackageDescription>
<NDC11Code>71919-0662-10</NDC11Code>
<ProductNDC>71919-662</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tamus Communis</ProprietaryName>
<NonProprietaryName>Dioscorea Communis</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110517</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>DIOSCOREA COMMUNIS TOP</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72603-662-11</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (72603-662-11) / 10 TABLET in 1 CARTON (72603-662-10) </PackageDescription>
<NDC11Code>72603-0662-11</NDC11Code>
<ProductNDC>72603-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211417</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg and 200 mcg. Each Levothyroxine sodium tablets, USP contains the inactive ingredients croscarmellose sodium, microcrystalline cellulose, silicon dioxide and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Table 9: Levothyroxine Sodium Tablet Color Additives. * Note - FD&C Yellow No. 6 is orange in color. Levothyroxine Sodium Tablet, USP meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>44567-100-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-100-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0100-10</NDC11Code>
<ProductNDC>44567-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
</NDC>
<NDC>
<NDCCode>44567-101-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-101-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0101-10</NDC11Code>
<ProductNDC>44567-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
</NDC>
<NDC>
<NDCCode>44567-102-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-102-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0102-10</NDC11Code>
<ProductNDC>44567-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
</NDC>
<NDC>
<NDCCode>44567-103-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-103-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0103-10</NDC11Code>
<ProductNDC>44567-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
</NDC>
<NDC>
<NDCCode>44567-104-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-104-10) / 100 mL in 1 VIAL</PackageDescription>
<NDC11Code>44567-0104-10</NDC11Code>
<ProductNDC>44567-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063142</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The solution after reconstitution is clear, colorless and free from visible particulates. It has the following structural formula. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Each Ampicillin for Injection, USP pharmacy bulk package bottle contains ampicillin sodium equivalent to 10 grams of ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package).</Description>
</NDC>
<NDC>
<NDCCode>44567-105-10</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (44567-105-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0105-10</NDC11Code>
<ProductNDC>44567-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062772</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
</NDC>
<NDC>
<NDCCode>44567-130-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (44567-130-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0130-10</NDC11Code>
<ProductNDC>44567-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065441</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
<Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>44567-131-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (44567-131-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>44567-0131-10</NDC11Code>
<ProductNDC>44567-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065441</ApplicationNumber>
<LabelerName>WG Critical Care, LLC</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
<Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
</NDCList>