RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>44567-663-10</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (44567-663-10)  / 250 mL in 1 BAG (44567-663-01) </PackageDescription>
    <NDC11Code>44567-0663-10</NDC11Code>
    <ProductNDC>44567-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diltiazem Hydrochloride In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250321</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218038</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250321</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium-channel blocker indicated for the following: 1 Temporary control of rapid ventricular rate in atrial fibrillation or atrial flutter. (1.1), 2 Rapid conversion of paroxysmal supraventricular tachycardias (PSVT) to sinus rhythm. (1.2).</IndicationAndUsage>
    <Description>Diltiazem Hydrochloride in Sodium Chloride Injection is a non-dihydropyridine calcium channel-blocker. Diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis- with the molecular weight of 450.98 and structural formula. Molecular formula: C22H26N204S.HCl. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste and it is soluble in water, methanol, and chloroform. Diltiazem Hydrochloride in Sodium Chloride Injection is a clear, colorless, sterile, nonpyrogenic, isotonic solution for intravenous use only. It is packaged in single-dose bags containing 100 mg/100 mL and 250 mg/250 mL. Each mL contains: 1 mg diltiazem hydrochloride, USP (equivalent to 0.92 mg diltiazem), 0.15 mg citric acid monohydrate, USP, 7.2 mg sodium chloride, USP, 0.13 mg sodium citrate dihydrate, USP, 10 mg sorbitol, NF, and water for injection, USP. Hydrochloric acid, NF and/or sodium hydroxide are added as needed to adjust pH to 4.5 - 5.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>13811-663-10</NDCCode>
    <PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 CARTON (13811-663-10)</PackageDescription>
    <NDC11Code>13811-0663-10</NDC11Code>
    <ProductNDC>13811-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Duloxetine</ProprietaryName>
    <NonProprietaryName>Duloxetine</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140819</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202949</ApplicationNumber>
    <LabelerName>Trigen Laboratories, LLC</LabelerName>
    <SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2017-11-22</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>55111-663-81</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (55111-663-81)  &gt; 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK (55111-663-79)</PackageDescription>
    <NDC11Code>55111-0663-81</NDC11Code>
    <ProductNDC>55111-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paricalcitol</ProprietaryName>
    <NonProprietaryName>Paricalcitol</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140625</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091412</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>PARICALCITOL</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Cholecalciferol [CS], Vitamin D3 Analog [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2017-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Paricalcitol USP, the active ingredient in paricalcitol capsules, is a synthetically manufactured, metabolically active vitamin D analog of calcitriol with modifications to the side chain (D2) and the A (19-nor) ring. Paricalcitol capsules are available as hard gelatin capsules for oral administration containing 1 microgram, 2 micrograms or 4 micrograms of paricalcitol. Each capsule also contains butylated hydroxytoluene, dehydrated ethanol, medium chain triglycerides and polyoxyl 35 castor oil. The medium chain triglycerides are fractionated from coconut oil or palm kernel oil. The capsule shell is composed of gelatin, sodium lauryl sulfate and titanium dioxide. The gelatin solution is composed of gelatin (210 bloom), red iron oxide (for 1 micrograms and 2 micrograms), yellow iron oxide (for 2 micrograms and 4 micrograms) and polysorbate 80. Paricalcitol is a white to almost white powder with the molecular formula of C27H44O3, which corresponds to a molecular weight of 416.64. Paricalcitol is chemically designated as 19-nor-1α,3β,25-trihydroxy-9,10-secoergosta-5(Z),7(E),22(E)-triene and has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-663-59</NDCCode>
    <PackageDescription>10 mL in 1 BOTTLE, DROPPER (62135-663-59) </PackageDescription>
    <NDC11Code>62135-0663-59</NDC11Code>
    <ProductNDC>62135-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tavaborole</ProprietaryName>
    <NonProprietaryName>Tavaborole</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20210203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211963</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>TAVABOROLE</SubstanceName>
    <StrengthNumber>43.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Boron Compounds [CS], Oxaborole Antifungal [EPC], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230908</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tavaborole topical solution is an oxaborole antifungal indicated for the treatment of onychomycosis of the toenails due to Trichophyton rubrumor Trichophyton mentagrophytes.</IndicationAndUsage>
    <Description>Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C 7H 6BFO 2, the molecular weight is 151.93 and the structural formula is:. Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include ethyl alcohol (76.4% v/v), edetate calcium disodium, propylene glycol, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>65841-663-10</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (65841-663-10) </PackageDescription>
    <NDC11Code>65841-0663-10</NDC11Code>
    <ProductNDC>65841-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dipyridamole</ProprietaryName>
    <NonProprietaryName>Dipyridamole</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080522</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040874</ApplicationNumber>
    <LabelerName>Zydus Lifesciences Limited</LabelerName>
    <SubstanceName>DIPYRIDAMOLE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080522</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65841-663-30</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (65841-663-30)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>65841-0663-30</NDC11Code>
    <ProductNDC>65841-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dipyridamole</ProprietaryName>
    <NonProprietaryName>Dipyridamole</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080522</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040874</ApplicationNumber>
    <LabelerName>Cadila Healthcare Limited</LabelerName>
    <SubstanceName>DIPYRIDAMOLE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-12-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080522</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65841-663-77</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (65841-663-77)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>65841-0663-77</NDC11Code>
    <ProductNDC>65841-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dipyridamole</ProprietaryName>
    <NonProprietaryName>Dipyridamole</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080522</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040874</ApplicationNumber>
    <LabelerName>Zydus Lifesciences Limited</LabelerName>
    <SubstanceName>DIPYRIDAMOLE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080522</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65862-663-78</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (65862-663-78)  / 10 TABLET in 1 BLISTER PACK (65862-663-10) </PackageDescription>
    <NDC11Code>65862-0663-78</NDC11Code>
    <ProductNDC>65862-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Aripiprazole</ProprietaryName>
    <NonProprietaryName>Aripiprazole</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203908</ApplicationNumber>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>ARIPIPRAZOLE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Aripiprazole tablets are indicated for the treatment of: 1 Schizophrenia, 2 Acute Treatment of Manic and Mixed Episodes associated with Bipolar I Disorder , 3 Irritability Associated with Autistic Disorder , 4 Treatment of Tourette’s Disorder.</IndicationAndUsage>
    <Description>Aripiprazole is an atypical antipsychotic drug that is available as aripiprazole tablets USP. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1-­piperazinyl]butoxy]-3,4-dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole tablets are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. In addition the 2 mg strength contains FD&amp;C Blue No. 2 and ferric oxide (sicovit yellow 10) and 5 mg contains FD&amp;C Blue No. 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>67172-663-71</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (67172-663-71)  &gt; 10 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>67172-0663-71</NDC11Code>
    <ProductNDC>67172-663</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Murine For Allergy Eye Drop</ProprietaryName>
    <NonProprietaryName>Apis Mellifica, Euphrasia Officinals, Sabadilla Officinalis And Sulphur</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Prestige Brands Holdings, Inc.</LabelerName>
    <SubstanceName>APIS MELLIFERA; EUPHRASIA STRICTA; SCHOENOCAULON OFFICINALE SEED; SULFUR</SubstanceName>
    <StrengthNumber>6; 6; 6; 8</StrengthNumber>
    <StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-04-03</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>68083-663-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (68083-663-10)  / 100 mL in 1 VIAL</PackageDescription>
    <NDC11Code>68083-0663-10</NDC11Code>
    <ProductNDC>68083-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vasopressin</ProprietaryName>
    <NonProprietaryName>Vasopressin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216963</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>VASOPRESSIN</SubstanceName>
    <StrengthNumber>.4</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Decreased Diuresis [PE], Vasoconstriction [PE], Vasopressins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vasopressin Injection is indicated to increase blood pressure in adults with vasodilatory shock who remain hypotensive despite fluids and catecholamines.</IndicationAndUsage>
    <Description>Vasopressin is a polypeptide hormone. Vasopressin injection, USP is a sterile, aqueous solution of synthetic arginine vasopressin for intravenous administration. The 1 mL solution contains vasopressin 20 units/mL, 1.36 mg sodium acetate buffer and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are included to adjust to a pH of 3.3 to 3.6. The 100 mL solution contains vasopressin 0.4 units/mL. Each mL of the 0.4 unit/mL strength also contains dextrose anhydrous, 0.0546 mg glacial acetic acid, 0.012 mg sodium acetate and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are included to adjust to a pH of 3.3 to 3.6. Each vial of the vasopressin injection premixed solutions contains 5% Dextrose in approximately 100 mL Water for Injection. The chemical name of vasopressin is Cyclo (1-6) L-Cysteinyl-L-Tyrosyl-L-Phenylalanyl-L-Glutaminyl-L-Asparaginyl-L-Cysteinyl-L-Prolyl-L-Arginyl-L-Glycinamide. It is a white to off-white powder or flakes, very soluble in water. The structural formula is:. Molecular Formula: C46H65N15O12S2     Molecular Weight: 1084.24. One mg is equivalent to 530 units.</Description>
  </NDC>
  <NDC>
    <NDCCode>71919-663-10</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-663-10) </PackageDescription>
    <NDC11Code>71919-0663-10</NDC11Code>
    <ProductNDC>71919-663</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Tanacetum Vulgare</ProprietaryName>
    <NonProprietaryName>Tanacetum Vulgare</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110517</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>TANACETUM VULGARE TOP</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110517</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>72603-663-11</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (72603-663-11)  / 10 TABLET in 1 BLISTER PACK (72603-663-10) </PackageDescription>
    <NDC11Code>72603-0663-11</NDC11Code>
    <ProductNDC>72603-663</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250408</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211417</ApplicationNumber>
    <LabelerName>NorthStar RxLLC</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>88</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260820</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg and 200 mcg. Each Levothyroxine sodium tablets, USP contains the inactive ingredients croscarmellose sodium, microcrystalline cellulose, silicon dioxide and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Table 9: Levothyroxine Sodium Tablet Color Additives. * Note - FD&amp;C Yellow No. 6 is orange in color. Levothyroxine Sodium Tablet, USP meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>75936-663-01</NDCCode>
    <PackageDescription>10 mL in 1 TUBE (75936-663-01) </PackageDescription>
    <NDC11Code>75936-0663-01</NDC11Code>
    <ProductNDC>75936-663</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mineral Mattescreen Spf 40 - Golden Hour</ProprietaryName>
    <NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20260115</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>Supergoop, LLC</LabelerName>
    <SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>1.31; 17.68</StrengthNumber>
    <StrengthUnit>g/100mL; g/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Stop use and ask a doctor if rash occurs. .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>44567-100-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-100-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0100-10</NDC11Code>
    <ProductNDC>44567-100</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-101-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-101-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0101-10</NDC11Code>
    <ProductNDC>44567-101</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-102-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-102-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0102-10</NDC11Code>
    <ProductNDC>44567-102</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-103-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-103-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0103-10</NDC11Code>
    <ProductNDC>44567-103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-104-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-104-10)  / 100 mL in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0104-10</NDC11Code>
    <ProductNDC>44567-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063142</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The solution after reconstitution is clear, colorless and free from visible particulates. It has the following structural formula. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Each Ampicillin for Injection, USP pharmacy bulk package bottle contains ampicillin sodium equivalent to 10 grams of ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package).</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-105-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (44567-105-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0105-10</NDC11Code>
    <ProductNDC>44567-105</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062772</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by S. pneumoniae, Staphylococcus aureus (penicillinase and non-penicillinase producing), H. influenzae and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin-G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp. and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. Indicated surgical procedures should be performed. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2a, 5a, 6b(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. It has the following chemical structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8.0 to 10.0. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. Ampicillin for Injection, USP is supplied in vials equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams of ampicillin. It is to be administered by intravenous or intramuscular routes.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-130-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-130-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0130-10</NDC11Code>
    <ProductNDC>44567-130</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cefepime</ProprietaryName>
    <NonProprietaryName>Cefepime</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065441</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
    <Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-131-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-131-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0131-10</NDC11Code>
    <ProductNDC>44567-131</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cefepime</ProprietaryName>
    <NonProprietaryName>Cefepime</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065441</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
    <Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-145-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-145-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (44567-145-01) </PackageDescription>
    <NDC11Code>44567-0145-10</NDC11Code>
    <ProductNDC>44567-145</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meropenem</ProprietaryName>
    <NonProprietaryName>Meropenem</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210773</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>MEROPENEM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meropenem for injection is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1), 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2), 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3).</IndicationAndUsage>
    <Description>Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)].</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-146-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-146-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (44567-146-01) </PackageDescription>
    <NDC11Code>44567-0146-10</NDC11Code>
    <ProductNDC>44567-146</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meropenem</ProprietaryName>
    <NonProprietaryName>Meropenem</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210773</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>MEROPENEM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Carbapenems [CS], Penem Antibacterial [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meropenem for injection is a penem antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (adult patients and pediatric patients 3 months of age and older only). (1.1), 2 Complicated intra-abdominal infections (adult and pediatric patients). (1.2), 3 Bacterial meningitis (pediatric patients 3 months of age and older only). (1.3).</IndicationAndUsage>
    <Description>Meropenem for Injection, USP is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3-[[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C17H25N3O5S3H2O with a molecular weight of 437.52. Its structural formula is. Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq). Each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq) [see Dosage and Administration (2.4)].</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-150-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-150-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0150-10</NDC11Code>
    <ProductNDC>44567-150</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20211130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201406</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>SULBACTAM SODIUM; AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1; 2</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS, Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-210-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-210-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0210-10</NDC11Code>
    <ProductNDC>44567-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20051130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201406</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>1; .5</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS, Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-211-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-211-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0211-10</NDC11Code>
    <ProductNDC>44567-211</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20051130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201406</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>SULBACTAM SODIUM; AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1; 2</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS, Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-221-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-221-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0221-10</NDC11Code>
    <ProductNDC>44567-221</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nafcillin</ProprietaryName>
    <NonProprietaryName>Nafcillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20130118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090560</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>NAFCILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY – Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin-resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Nafcillin for Injection, USP is a sterile semisynthetic penicillin derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C21H21N2NaO5S ●H2O                                       MW=454.47Nafcillin for Injection, USP for intramuscular or intravenous route of administration, contains nafcillin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 to 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial, is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-222-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-222-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0222-10</NDC11Code>
    <ProductNDC>44567-222</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nafcillin</ProprietaryName>
    <NonProprietaryName>Nafcillin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20130118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090560</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>NAFCILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY – Susceptibility Test Methods). Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to methicillin-resistant Staphylococcus sp., therapy with Nafcillin for Injection should be discontinued and alternative therapy provided. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Nafcillin for Injection, USP is a sterile semisynthetic penicillin derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows. C21H21N2NaO5S ●H2O                                       MW=454.47Nafcillin for Injection, USP for intramuscular or intravenous route of administration, contains nafcillin sodium as a sterile white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. The pH of the reconstituted solution is 6 to 8.5. Nafcillin for Injection, USP contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial, is buffered with approximately 38 mg sodium citrate per gram. The sodium content is about 66 mg [2.9 mEq] per gram.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-236-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-236-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0236-10</NDC11Code>
    <ProductNDC>44567-236</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftazidime</ProprietaryName>
    <NonProprietaryName>Ceftazidime</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062640</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CEFTAZIDIME</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ceftazidime for injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases. 1. Lower Respiratory Tract Infections, including pneumonia, caused by Pseudomonas aeruginosa and other Pseudomonas spp.; Haemophilus influenzae, including ampicillin-resistant strains; Klebsiella spp.; Enterobacter spp.; Proteus mirabilis; Escherichia coli; Serratia spp.; Citrobacter spp.; Streptococcus pneumoniae; and Staphylococcus aureus (methicillin-susceptible strains). 2. Skin and Skin-Structure Infections caused by Pseudomonas aeruginosa; Klebsiella spp.; Escherichia coli; Proteus spp., including Proteus mirabilis and indole-positive Proteus; Enterobacter spp.; Serratia spp.; Staphylococcus aureus (methicillin-susceptible strains); and Streptococcus pyogenes (group A beta-hemolytic streptococci). 3. Urinary Tract Infections, both complicated and uncomplicated, caused by Pseudomonas aeruginosa; Enterobacter spp.; Proteus spp., including Proteus mirabilis and indole-positive Proteus; Klebsiella spp.; and Escherichia coli. 4. Bacterial Septicemia caused by Pseudomonas aeruginosa, Klebsiella spp., Haemophilus influenzae, Escherichia coli, Serratia spp., Streptococcus pneumoniae, and Staphylococcus aureus (methicillin-susceptible strains). 5. Bone and Joint Infections caused by Pseudomonas aeruginosa, Klebsiella spp., Enterobacter spp., and Staphylococcus aureus (methicillin-susceptible strains). 6. Gynecologic Infections, including endometritis, pelvic cellulitis, and other infections of the female genital tract caused by Escherichia coli. 7. Intra-abdominal Infections, including peritonitis caused by Escherichia coli, Klebsiella spp., and Staphylococcus aureus (methicillin-susceptible strains) and polymicrobial infections caused by aerobic and anaerobic organisms and Bacteroides spp. (many strains of Bacteroides fragilis are resistant). 8. Central Nervous System Infections, including meningitis, caused by Haemophilus influenzae and Neisseria meningitidis. Ceftazidime has also been used successfully in a limited number of cases of meningitis due to Pseudomonas aeruginosa and Streptococcus pneumoniae. Ceftazidime for injection, USP may be used alone in cases of confirmed or suspected sepsis. Ceftazidime has been used successfully in clinical trials as empiric therapy in cases where various concomitant therapies with other antibacterial drugs have been used. Ceftazidime for injection, USP may also be used concomitantly with other antibacterial drugs, such as aminoglycosides, vancomycin, and clindamycin; in severe and life-threatening infections; and in the immunocompromised patient. When such concomitant treatment is appropriate, prescribing information in the labeling for the other antibacterial drugs should be followed. The dose depends on the severity of the infection and the patient’s condition. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftazidime for injection, USP and other antibacterial drugs, ceftazidime for injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ceftazidime is a semisynthetic, broad-spectrum, beta-lactam antibacterial drug for parenteral administration. It is the pentahydrate of pyridinium, 1-[[7-[[(2-amino-4-thiazolyl)[(1-carboxy-1-methylethoxy)imino]acetyl]amino]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-, hydroxide, inner salt, [6R-[6α,7β(Z)]]. It has the following structural formula. The molecular formula is C22H22N6O7S25H2O, representing a molecular weight of 636.65. Ceftazidime for injection, USP is a sterile, dry-powdered mixture of ceftazidime pentahydrate and sodium carbonate. The sodium carbonate at a concentration of 118 mg/g of ceftazidime activity has been admixed to facilitate dissolution. The total sodium content of the mixture is approximately 54 mg (2.3 mEq)/g of ceftazidime activity. Ceftazidime for injection, USP in sterile crystalline form is supplied in single-dose vials equivalent to 1 g or 2 g of anhydrous ceftazidime. Ceftazidime for injection, USP is a white to cream-colored crystalline powder. Solutions of ceftazidime for injection, USP range in color from light yellow to amber, depending on the diluent and volume used. The pH of freshly constituted solutions usually ranges from 5 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-240-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (44567-240-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>44567-0240-10</NDC11Code>
    <ProductNDC>44567-240</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cefepime</ProprietaryName>
    <NonProprietaryName>Cefepime</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20141010</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065441</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: 1 Pneumonia. (1.1), 2 Empiric therapy for febrile neutropenic patients. (1.2), 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3), 4 Uncomplicated skin and skin structure infections. (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5).</IndicationAndUsage>
    <Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g, and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
  </NDC>
</NDCList>