{
"NDC": [
{
"NDCCode": "45802-465-64",
"PackageDescription": "120 mL in 1 BOTTLE (45802-465-64) ",
"NDC11Code": "45802-0465-64",
"ProductNDC": "45802-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoconazole",
"NonProprietaryName": "Ketoconazole",
"DosageFormName": "SHAMPOO, SUSPENSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076419",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "KETOCONAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100119",
"SamplePackage": "N",
"IndicationAndUsage": "Ketoconazole Shampoo, 2% is indicated for the treatment of tinea (pityriasis) versicolor caused by or presumed to be caused by Pityrosporum orbiculare (also known as Malassezia furfur or M. orbiculare). Note: Tinea (pityriasis) versicolor may give rise to hyperpigmented or hypopigmented patches on the trunk which may extend to the neck, arms and upper thighs. Treatment of the infection may not immediately result in normalization of pigment to the affected sites. Normalization of pigment following successful therapy is variable and may take months, depending on individual skin type and incidental sun exposure. Although tinea versicolor is not contagious, it may recur because the organism that causes the disease is part of the normal skin flora.",
"Description": "Ketoconazole Shampoo, 2% is a red-orange liquid for topical application, containing the broad spectrum synthetic antifungal agent ketoconazole in a concentration of 2% in an aqueous suspension. It also contains: coconut fatty acid diethanolamide, disodium laureth sulfosuccinate, FD & C Red No. 40, hydrochloric acid, imidurea, laurdimonium hydroxypropyl hydrolyzed collagen, PEG-120 methyl glucose dioleate, purified water, sodium chloride, sodium hydroxide, and sodium lauryl ether sulfate. Ketoconazole is cis-1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy] phenyl]piperazine and has the following structural formula."
},
{
"NDCCode": "49884-465-65",
"PackageDescription": "60 PACKET in 1 CARTON (49884-465-65) / 9 g in 1 PACKET (49884-465-64) ",
"NDC11Code": "49884-0465-65",
"ProductNDC": "49884-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20050915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077204",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/9g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050915",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for Oral Suspension USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with Cholestyramine, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels >400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases Cholestyramine may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of Cholestyramine therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of Cholestyramine or adding other lipid-lowering agents in combination with Cholestyramine should be considered. Since the goal of treatment is to lower LDL-C, the NCEP 4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for Oral Suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in Cholestyramine is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of Cholestyramine for Oral Suspension USP. Four grams of anhydrous cholestyramine resin is contained in 5 grams of Cholestyramine for Oral Suspension USP, Light. It is represented by the following structural formula. Cholestyramine for Oral Suspension USP contains the following inactive ingredients: acacia, citric acid, D&C Yellow No. 10, FD&C Yellow No. 6, flavor (natural and artificial Orange), polysorbate 80, propylene glycol alginate and sucrose. Cholestyramine for Oral Suspension USP, Light contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Red No. 40, flavor (natural and artificial Orange), maltodextrin, propylene glycol alginate and xanthan gum."
},
{
"NDCCode": "45802-040-64",
"PackageDescription": "118 mL in 1 BOTTLE (45802-040-64) ",
"NDC11Code": "45802-0040-64",
"ProductNDC": "45802-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Selenium Sulfide",
"NonProprietaryName": "Selenium Sulfide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089996",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "SELENIUM SULFIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/100mL",
"Status": "Active",
"LastUpdate": "2025-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060925",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of tinea versicolor, seborrheic dermatitis of the scalp, and dandruff.",
"Description": "A liquid antiseborrheic, antifungal preparation for topical application. Selenium sulfide has the molecular formula SeS2 and has a molecular weight of 143.09."
},
{
"NDCCode": "45802-124-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-124-64) / 28.4 g in 1 TUBE",
"NDC11Code": "45802-0124-64",
"ProductNDC": "45802-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"NonProprietaryName": "Hydrocortisone Acetate, Pramoxine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE",
"StrengthNumber": "2.5; 1",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170329",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Hydrocortisone Acetate 2.5% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 2.5% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below."
},
{
"NDCCode": "45802-144-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-144-64) / 28.35 g in 1 TUBE",
"NDC11Code": "45802-0144-64",
"ProductNDC": "45802-144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"NonProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085368",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE",
"StrengthNumber": "1; 1",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100413",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Hydrocortisone Acetate 1% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 1% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below."
},
{
"NDCCode": "45802-346-64",
"PackageDescription": "1 KIT in 1 CARTON (45802-346-64) * 1 TUBE in 1 CARTON (45802-041-64) > 28.35 g in 1 TUBE * 6 g in 1 POUCH (45802-474-01)",
"NDC11Code": "45802-0346-64",
"ProductNDC": "45802-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"NonProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"DosageFormName": "KIT",
"StartMarketingDate": "20100915",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"Status": "Deprecated",
"LastUpdate": "2017-11-01"
},
{
"NDCCode": "45802-472-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-472-64) / 28.35 g in 1 TUBE",
"NDC11Code": "45802-0472-64",
"ProductNDC": "45802-472",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"NonProprietaryName": "Hydrocortisone Acetate Pramoxine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19960927",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE",
"StrengthNumber": "2.5; 1",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100413",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Hydrocortisone Acetate 2.5% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 2.5% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below. hydrocortisone acetate. Pregn-4-ene-3, 20-dione, 21-(acetyloxy)-11. 17-dihydroxy-, (11-beta)-. C23H32O6; mol. wt: 404.50. pramoxine hydrochloride. 4-(3-(p-butoxyphenoxy)propyl)morpholine hydrochloride. C17H27NO3.HCl; mol. wt: 329.87."
},
{
"NDCCode": "45802-930-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-930-64) > 28.4 g in 1 TUBE",
"NDC11Code": "45802-0930-64",
"ProductNDC": "45802-930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone Iodoquinol",
"NonProprietaryName": "Hydrocortisone, Iodoquinol",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080714",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "HYDROCORTISONE; IODOQUINOL",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20080714",
"SamplePackage": "N"
},
{
"NDCCode": "45802-975-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-975-64) > 28.35 g in 1 TUBE",
"NDC11Code": "45802-0975-64",
"ProductNDC": "45802-975",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perrigo Hydroquinone",
"ProprietaryNameSuffix": "With Sunscreens",
"NonProprietaryName": "Hydroquinone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20081023",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "HYDROQUINONE; DIOXYBENZONE; OXYBENZONE; PADIMATE O",
"StrengthNumber": "40; 30; 20; 80",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Pharm_Classes": "Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "45802-980-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-980-64) > 28.35 g in 1 TUBE",
"NDC11Code": "45802-0980-64",
"ProductNDC": "45802-980",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroquinone",
"NonProprietaryName": "Hydroquinone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080617",
"EndMarketingDate": "20181121",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "HYDROQUINONE",
"StrengthNumber": "40",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-11-22",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "45802-982-64",
"PackageDescription": "1 TUBE in 1 CARTON (45802-982-64) > 28.35 g in 1 TUBE",
"NDC11Code": "45802-0982-64",
"ProductNDC": "45802-982",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perrigo Hydroquinone",
"ProprietaryNameSuffix": "With Sunscreens",
"NonProprietaryName": "Hydroquinone",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090204",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "HYDROQUINONE; DIOXYBENZONE; PADIMATE O",
"StrengthNumber": "40; 30; 50",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "45802-984-64",
"PackageDescription": "1 JAR in 1 CARTON (45802-984-64) > 28.4 g in 1 JAR",
"NDC11Code": "45802-0984-64",
"ProductNDC": "45802-984",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perrigo Hydroquinone",
"ProprietaryNameSuffix": "With Sunscreens",
"NonProprietaryName": "Hydroquinone, Octinoxate, Oxybenzone, Padimate O",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20080923",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "HYDROQUINONE; OCTINOXATE; OXYBENZONE; PADIMATE O",
"StrengthNumber": "40; 40; 40; 80",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Pharm_Classes": "Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "49281-026-50",
"PackageDescription": "10 SYRINGE in 1 CARTON (49281-026-50) / .5 mL in 1 SYRINGE (49281-026-88) ",
"NDC11Code": "49281-0026-50",
"ProductNDC": "49281-026",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Nuvaxovid 2026-27",
"NonProprietaryName": "Nvx-cov2928",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20260827",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125817",
"LabelerName": "Sanofi Vaccines US Inc.",
"SubstanceName": "NVX-COV2928",
"StrengthNumber": "5",
"StrengthUnit": "ug/.5mL",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260827",
"SamplePackage": "N",
"IndicationAndUsage": "NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). NUVAXOVID is approved for use in individuals who are: 1 65 years of age and older, or, 2 12 years through 64 years of age with at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.",
"Description": "NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2026-2027 Formula) contains 5 mcg of recombinant spike glycoprotein (rS) of the SARS-CoV-2 JN.1-descendent variant XFG and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex."
},
{
"NDCCode": "80631-200-10",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (80631-200-10) / .5 mL in 1 SYRINGE, GLASS (80631-200-01) ",
"NDC11Code": "80631-0200-10",
"ProductNDC": "80631-200",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Nuvaxovid Covid-19 Vaccine, Adjuvanted",
"NonProprietaryName": "Nvx-cov2705",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20250516",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125817",
"LabelerName": "Novavax, Inc.",
"SubstanceName": "NVX-COV2705",
"StrengthNumber": "5",
"StrengthUnit": "ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2025-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250516",
"SamplePackage": "N",
"IndicationAndUsage": "NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in adults 65 years and older. NUVAXOVID is also indicated for individuals 12 through 64 years who have at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.",
"Description": "NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2024 – 2025 Formula) contains 5 mcg of recombinant spike (rS) protein of the SARS-CoV-2 Omicron variant lineage JN.1 and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex."
},
{
"NDCCode": "80631-207-10",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (80631-207-10) / .5 mL in 1 SYRINGE, GLASS (80631-207-01) ",
"NDC11Code": "80631-0207-10",
"ProductNDC": "80631-207",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Nuvaxovid Covid-19 Vaccine, Adjuvanted",
"NonProprietaryName": "Nvx-cov2705",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125817",
"LabelerName": "Novavax, Inc.",
"SubstanceName": "NVX-COV2705",
"StrengthNumber": "5",
"StrengthUnit": "ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). NUVAXOVID is approved for use in individuals who are: 1 65 years of age and older, or, 2 12 years through 64 years of age with at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.",
"Description": "NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2025-2026 Formula) contains 5 mcg of recombinant spike (rS) protein of the SARS-CoV-2 Omicron variant lineage JN.1 and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex."
},
{
"NDCCode": "45802-021-46",
"PackageDescription": "56.2 g in 1 BOTTLE, PLASTIC (45802-021-46) ",
"NDC11Code": "45802-0021-46",
"ProductNDC": "45802-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072538",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060630",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone Dipropionate Lotion USP, 0.05% is a medium-potency corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years and older.",
"Description": "Betamethasone Dipropionate Lotion USP, 0.05% contains betamethasone dipropionate, USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has high corticosteroid activity and slight mineralocorticoid activity. Betamethasone dipropionate is the 17, 21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Lotion USP, 0.05% contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in a lotion base of carbomer homopolymer type B, isopropyl alcohol, and purified water. Sodium hydroxide is used to adjust pH."
},
{
"NDCCode": "45802-505-14",
"PackageDescription": "1 TUBE in 1 CARTON (45802-505-14) / 15 g in 1 TUBE",
"NDC11Code": "45802-0505-14",
"ProductNDC": "45802-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215847",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220520",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Betamethasone dipropionate ointment contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is a white to cream white odorless crystalline powder insoluble in water. Chemically, it is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21- dipropionate. The structural formula is. Each gram of the 0.05% ointment contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in an ointment base of mineral oil and white petrolatum."
},
{
"NDCCode": "45802-505-84",
"PackageDescription": "1 TUBE in 1 CARTON (45802-505-84) / 45 g in 1 TUBE",
"NDC11Code": "45802-0505-84",
"ProductNDC": "45802-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215847",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220520",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "Betamethasone dipropionate ointment contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is a white to cream white odorless crystalline powder insoluble in water. Chemically, it is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21- dipropionate. The structural formula is. Each gram of the 0.05% ointment contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in an ointment base of mineral oil and white petrolatum."
},
{
"NDCCode": "45802-608-01",
"PackageDescription": "1 TUBE in 1 CARTON (45802-608-01) / 100 g in 1 TUBE",
"NDC11Code": "45802-0608-01",
"ProductNDC": "45802-608",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcitriol",
"NonProprietaryName": "Calcitriol",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120308",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA022087",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "CALCITRIOL",
"StrengthNumber": "3",
"StrengthUnit": "ug/g",
"Pharm_Classes": "Cholecalciferol [CS], Vitamin D3 Analog [EPC]",
"Status": "Active",
"LastUpdate": "2023-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120308",
"SamplePackage": "N",
"IndicationAndUsage": "Calcitriol Ointment is a vitamin D analog indicated for the topical treatment of mild to moderate plaque psoriasis in adults and pediatric patients 2 years and older (1.1)Limitations of UseThe safety and effectiveness of Calcitriol Ointment in patients with known or suspected disorders of calcium metabolism have not been evaluated. (1.2).",
"Description": "Calcitriol Ointment, 3 mcg/g is a vitamin D analog intended for topical application to the skin. The chemical name of the active ingredient is (5Z,7E)-9, 10-secocholesta-5,7,10(19)-triene-1α, 3β,25-triol. The structural formula is. Calcitriol is a white or almost white crystalline solid. It is practically insoluble in water, soluble in alcohol and in fatty oils. The molecular formula is C27H44O3, and the molecular weight is 416.64. Calcitriol Ointment is a translucent ointment containing 3 mcg/g (0.0003% w/w) of calcitriol, packaged in aluminum tubes with screw caps. Other components of the ointment are mineral oil, dl-α-tocopherol, and white petrolatum."
},
{
"NDCCode": "0054-0326-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0326-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0326-56",
"ProductNDC": "0054-0326",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 100",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201217",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0054-0327-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0327-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0327-56",
"ProductNDC": "0054-0327",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 250",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201217",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0054-0328-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0328-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0328-56",
"ProductNDC": "0054-0328",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 500",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231219",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7516-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7516-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7516-31",
"ProductNDC": "0093-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "500; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7517-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7517-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7517-31",
"ProductNDC": "0093-7517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "100; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7518-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7518-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7518-31",
"ProductNDC": "0093-7518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "250; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0131-5410-70",
"PackageDescription": "465 mL in 1 BOTTLE, PLASTIC (0131-5410-70) ",
"NDC11Code": "00131-5410-70",
"ProductNDC": "0131-5410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vimpat",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20100420",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022255",
"LabelerName": "UCB, Inc.",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100420",
"EndMarketingDatePackage": "20230430",
"SamplePackage": "N"
},
{
"NDCCode": "0143-9180-25",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9180-25) / 10 mL in 1 VIAL (0143-9180-01) ",
"NDC11Code": "00143-9180-25",
"ProductNDC": "0143-9180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213071",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2023-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231016",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.",
"Description": "Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "0143-9184-25",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9184-25) / 50 mL in 1 VIAL (0143-9184-01) ",
"NDC11Code": "00143-9184-25",
"ProductNDC": "0143-9184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213071",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231124",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.",
"Description": "Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "0143-9185-20",
"PackageDescription": "20 VIAL in 1 CARTON (0143-9185-20) / 100 mL in 1 VIAL (0143-9185-01) ",
"NDC11Code": "00143-9185-20",
"ProductNDC": "0143-9185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213071",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.",
"Description": "Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "0254-3010-08",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (0254-3010-08)",
"NDC11Code": "00254-3010-08",
"ProductNDC": "0254-3010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omega-3-acid Ethyl Esters",
"NonProprietaryName": "Omega-3-acid Ethyl Esters",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203893",
"LabelerName": "Par Pharmaceutical Inc.",
"SubstanceName": "OMEGA-3-ACID ETHYL ESTERS",
"StrengthNumber": "900",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Fatty Acids, Omega-3 [CS], Omega-3 Fatty Acid [EPC]",
"Status": "Active",
"LastUpdate": "2017-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170919",
"SamplePackage": "N",
"IndicationAndUsage": "Omega-3-acid ethyl esters capsules, USP are indicated as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia (HTG). Usage Considerations: Patients should be placed on an appropriate lipid-lowering diet before receiving omega-3-acid ethyl esters capsules, USP and should continue this diet during treatment with omega-3-acid ethyl esters capsules, USP. Laboratory studies should be done to ascertain that the lipid levels are consistently abnormal before instituting therapy with omega-3-acid ethyl esters. Every attempt should be made to control serum lipids with appropriate diet, exercise, weight loss in obese patients, and control of any medical problems such as diabetes mellitus and hypothyroidism that are contributing to the lipid abnormalities. Medications known to exacerbate hypertriglyceridemia (such as beta blockers, thiazides, estrogens) should be discontinued or changed if possible prior to consideration of triglyceride-lowering drug therapy. Limitations of Use:. The effect of omega-3-acid ethyl esters capsules, USP on the risk for pancreatitis has not been determined. The effect of omega-3-acid ethyl esters capsules, USP on cardiovascular mortality and morbidity has not been determined.",
"Description": "Omega-3-acid ethyl esters capsules, USP, a lipid-regulating agent, are supplied as a liquid-filled gel capsule for oral administration. Each 1-gram capsule of omega-3-acid ethyl esters capsules, USP contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EPA - approximately 465 mg) and docosahexaenoic acid (DHA - approximately 375 mg). The empirical formula of EPA ethyl ester is C22H34O2, and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is:. The empirical formula of DHA ethyl ester is C24H36O2, and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is. Omega-3-acid ethyl esters capsules, USP also contain the following inactive ingredients: gelatin, glycerin, purified water and opacode white ink (contains shellac glaze, titanium dioxide, purified water, N-butyl alcohol, lecithin and simethicone)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>45802-465-64</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE (45802-465-64) </PackageDescription>
<NDC11Code>45802-0465-64</NDC11Code>
<ProductNDC>45802-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoconazole</ProprietaryName>
<NonProprietaryName>Ketoconazole</NonProprietaryName>
<DosageFormName>SHAMPOO, SUSPENSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076419</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>KETOCONAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ketoconazole Shampoo, 2% is indicated for the treatment of tinea (pityriasis) versicolor caused by or presumed to be caused by Pityrosporum orbiculare (also known as Malassezia furfur or M. orbiculare). Note: Tinea (pityriasis) versicolor may give rise to hyperpigmented or hypopigmented patches on the trunk which may extend to the neck, arms and upper thighs. Treatment of the infection may not immediately result in normalization of pigment to the affected sites. Normalization of pigment following successful therapy is variable and may take months, depending on individual skin type and incidental sun exposure. Although tinea versicolor is not contagious, it may recur because the organism that causes the disease is part of the normal skin flora.</IndicationAndUsage>
<Description>Ketoconazole Shampoo, 2% is a red-orange liquid for topical application, containing the broad spectrum synthetic antifungal agent ketoconazole in a concentration of 2% in an aqueous suspension. It also contains: coconut fatty acid diethanolamide, disodium laureth sulfosuccinate, FD & C Red No. 40, hydrochloric acid, imidurea, laurdimonium hydroxypropyl hydrolyzed collagen, PEG-120 methyl glucose dioleate, purified water, sodium chloride, sodium hydroxide, and sodium lauryl ether sulfate. Ketoconazole is cis-1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy] phenyl]piperazine and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>49884-465-65</NDCCode>
<PackageDescription>60 PACKET in 1 CARTON (49884-465-65) / 9 g in 1 PACKET (49884-465-64) </PackageDescription>
<NDC11Code>49884-0465-65</NDC11Code>
<ProductNDC>49884-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077204</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/9g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for Oral Suspension USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with Cholestyramine, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels >400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases Cholestyramine may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of Cholestyramine therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of Cholestyramine or adding other lipid-lowering agents in combination with Cholestyramine should be considered. Since the goal of treatment is to lower LDL-C, the NCEP 4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for Oral Suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in Cholestyramine is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of Cholestyramine for Oral Suspension USP. Four grams of anhydrous cholestyramine resin is contained in 5 grams of Cholestyramine for Oral Suspension USP, Light. It is represented by the following structural formula. Cholestyramine for Oral Suspension USP contains the following inactive ingredients: acacia, citric acid, D&C Yellow No. 10, FD&C Yellow No. 6, flavor (natural and artificial Orange), polysorbate 80, propylene glycol alginate and sucrose. Cholestyramine for Oral Suspension USP, Light contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Red No. 40, flavor (natural and artificial Orange), maltodextrin, propylene glycol alginate and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>45802-040-64</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE (45802-040-64) </PackageDescription>
<NDC11Code>45802-0040-64</NDC11Code>
<ProductNDC>45802-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Selenium Sulfide</ProprietaryName>
<NonProprietaryName>Selenium Sulfide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089996</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>SELENIUM SULFIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of tinea versicolor, seborrheic dermatitis of the scalp, and dandruff.</IndicationAndUsage>
<Description>A liquid antiseborrheic, antifungal preparation for topical application. Selenium sulfide has the molecular formula SeS2 and has a molecular weight of 143.09.</Description>
</NDC>
<NDC>
<NDCCode>45802-124-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-124-64) / 28.4 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0124-64</NDC11Code>
<ProductNDC>45802-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</ProprietaryName>
<NonProprietaryName>Hydrocortisone Acetate, Pramoxine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5; 1</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Hydrocortisone Acetate 2.5% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 2.5% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below.</Description>
</NDC>
<NDC>
<NDCCode>45802-144-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-144-64) / 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0144-64</NDC11Code>
<ProductNDC>45802-144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</ProprietaryName>
<NonProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085368</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1; 1</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Hydrocortisone Acetate 1% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 1% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below.</Description>
</NDC>
<NDC>
<NDCCode>45802-346-64</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (45802-346-64) * 1 TUBE in 1 CARTON (45802-041-64) > 28.35 g in 1 TUBE * 6 g in 1 POUCH (45802-474-01)</PackageDescription>
<NDC11Code>45802-0346-64</NDC11Code>
<ProductNDC>45802-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</ProprietaryName>
<NonProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20100915</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2017-11-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>45802-472-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-472-64) / 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0472-64</NDC11Code>
<ProductNDC>45802-472</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</ProprietaryName>
<NonProprietaryName>Hydrocortisone Acetate Pramoxine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19960927</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>HYDROCORTISONE ACETATE; PRAMOXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5; 1</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Hydrocortisone Acetate 2.5% and Pramoxine HCl 1% Cream is a topical preparation containing hydrocortisone acetate 2.5% w/w and pramoxine hydrochloride 1% w/w in a hydrophilic cream base containing stearic acid, cetyl alcohol, Aquaphor®, isopropyl palmitate, polyoxyl 40 stearate, propylene glycol, potassium sorbate, sorbic acid, triethanolamine lauryl sulfate, and purified water. Topical corticosteroids are anti-inflammatory and anti-pruritic agents. The structural formula, the chemical name, molecular formula and molecular weight for the active ingredients are presented below. hydrocortisone acetate. Pregn-4-ene-3, 20-dione, 21-(acetyloxy)-11. 17-dihydroxy-, (11-beta)-. C23H32O6; mol. wt: 404.50. pramoxine hydrochloride. 4-(3-(p-butoxyphenoxy)propyl)morpholine hydrochloride. C17H27NO3.HCl; mol. wt: 329.87.</Description>
</NDC>
<NDC>
<NDCCode>45802-930-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-930-64) > 28.4 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0930-64</NDC11Code>
<ProductNDC>45802-930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone Iodoquinol</ProprietaryName>
<NonProprietaryName>Hydrocortisone, Iodoquinol</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080714</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>HYDROCORTISONE; IODOQUINOL</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>45802-975-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-975-64) > 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0975-64</NDC11Code>
<ProductNDC>45802-975</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perrigo Hydroquinone</ProprietaryName>
<ProprietaryNameSuffix>With Sunscreens</ProprietaryNameSuffix>
<NonProprietaryName>Hydroquinone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20081023</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>HYDROQUINONE; DIOXYBENZONE; OXYBENZONE; PADIMATE O</SubstanceName>
<StrengthNumber>40; 30; 20; 80</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>45802-980-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-980-64) > 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0980-64</NDC11Code>
<ProductNDC>45802-980</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroquinone</ProprietaryName>
<NonProprietaryName>Hydroquinone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080617</StartMarketingDate>
<EndMarketingDate>20181121</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>HYDROQUINONE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-22</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>45802-982-64</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-982-64) > 28.35 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0982-64</NDC11Code>
<ProductNDC>45802-982</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perrigo Hydroquinone</ProprietaryName>
<ProprietaryNameSuffix>With Sunscreens</ProprietaryNameSuffix>
<NonProprietaryName>Hydroquinone</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090204</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>HYDROQUINONE; DIOXYBENZONE; PADIMATE O</SubstanceName>
<StrengthNumber>40; 30; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>45802-984-64</NDCCode>
<PackageDescription>1 JAR in 1 CARTON (45802-984-64) > 28.4 g in 1 JAR</PackageDescription>
<NDC11Code>45802-0984-64</NDC11Code>
<ProductNDC>45802-984</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perrigo Hydroquinone</ProprietaryName>
<ProprietaryNameSuffix>With Sunscreens</ProprietaryNameSuffix>
<NonProprietaryName>Hydroquinone, Octinoxate, Oxybenzone, Padimate O</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20080923</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>HYDROQUINONE; OCTINOXATE; OXYBENZONE; PADIMATE O</SubstanceName>
<StrengthNumber>40; 40; 40; 80</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Depigmenting Activity [PE],Melanin Synthesis Inhibitor [EPC],Melanin Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>49281-026-50</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (49281-026-50) / .5 mL in 1 SYRINGE (49281-026-88) </PackageDescription>
<NDC11Code>49281-0026-50</NDC11Code>
<ProductNDC>49281-026</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Nuvaxovid 2026-27</ProprietaryName>
<NonProprietaryName>Nvx-cov2928</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20260827</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125817</ApplicationNumber>
<LabelerName>Sanofi Vaccines US Inc.</LabelerName>
<SubstanceName>NVX-COV2928</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). NUVAXOVID is approved for use in individuals who are: 1 65 years of age and older, or, 2 12 years through 64 years of age with at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.</IndicationAndUsage>
<Description>NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2026-2027 Formula) contains 5 mcg of recombinant spike glycoprotein (rS) of the SARS-CoV-2 JN.1-descendent variant XFG and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>80631-200-10</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (80631-200-10) / .5 mL in 1 SYRINGE, GLASS (80631-200-01) </PackageDescription>
<NDC11Code>80631-0200-10</NDC11Code>
<ProductNDC>80631-200</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Nuvaxovid Covid-19 Vaccine, Adjuvanted</ProprietaryName>
<NonProprietaryName>Nvx-cov2705</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20250516</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125817</ApplicationNumber>
<LabelerName>Novavax, Inc.</LabelerName>
<SubstanceName>NVX-COV2705</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250516</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in adults 65 years and older. NUVAXOVID is also indicated for individuals 12 through 64 years who have at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.</IndicationAndUsage>
<Description>NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2024 – 2025 Formula) contains 5 mcg of recombinant spike (rS) protein of the SARS-CoV-2 Omicron variant lineage JN.1 and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>80631-207-10</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (80631-207-10) / .5 mL in 1 SYRINGE, GLASS (80631-207-01) </PackageDescription>
<NDC11Code>80631-0207-10</NDC11Code>
<ProductNDC>80631-207</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Nuvaxovid Covid-19 Vaccine, Adjuvanted</ProprietaryName>
<NonProprietaryName>Nvx-cov2705</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125817</ApplicationNumber>
<LabelerName>Novavax, Inc.</LabelerName>
<SubstanceName>NVX-COV2705</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NUVAXOVID is a vaccine indicated for active immunization to prevent coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). NUVAXOVID is approved for use in individuals who are: 1 65 years of age and older, or, 2 12 years through 64 years of age with at least one underlying condition that puts them at high risk for severe outcomes from COVID-19.</IndicationAndUsage>
<Description>NUVAXOVID (COVID-19 Vaccine, Adjuvanted) is a colorless to slightly yellow, clear to mildly opalescent sterile suspension for intramuscular use that is free from visible particles. Each 0.5 mL dose of NUVAXOVID (2025-2026 Formula) contains 5 mcg of recombinant spike (rS) protein of the SARS-CoV-2 Omicron variant lineage JN.1 and 50 mcg Matrix-M adjuvant. The Matrix-M adjuvant is composed of Fraction-A (42.5 mcg) and Fraction-C (7.5 mcg) of saponin extracts from the soapbark tree, Quillaja saponaria Molina. The rS protein is produced by recombinant DNA technology using a baculovirus expression system in the Sf9 insect cell line that is derived from the Spodoptera frugiperda species. Each 0.5 mL dose of NUVAXOVID also contains the following ingredients: cholesterol (30.5 mcg), phosphatidylcholine (23 mcg), potassium dihydrogen phosphate (3.85 mcg), potassium chloride (2.25 mcg), disodium hydrogen phosphate dihydrate (14.7 mcg), disodium hydrogen phosphate heptahydrate (2.465 mg), sodium dihydrogen phosphate monohydrate (0.445 mg), sodium chloride (8.766 mg), polysorbate 80 (0.050 mg), and Water for Injection. The pH is adjusted with sodium hydroxide or hydrochloric acid. Each 0.5 mL dose of NUVAXOVID may also contain residual amounts of baculovirus and Sf9 cell proteins (≤ 0.96 mcg), baculovirus and cellular DNA (≤ 0.00016 mcg), lentil lectin (< 0.025 mcg), methyl-α-D-mannopyranoside (2 mcg), simethicone (< 0.92 mcg), pluronic F-68 (< 2.19 mcg), Triton X-100 (< 0.025 mcg), Tergitol (NP9) (< 0.05 mcg), and DL-α-tocopherol (≤ 0.05 mcg). NUVAXOVID does not contain a preservative. The syringe tip cap and plunger stopper are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>45802-021-46</NDCCode>
<PackageDescription>56.2 g in 1 BOTTLE, PLASTIC (45802-021-46) </PackageDescription>
<NDC11Code>45802-0021-46</NDC11Code>
<ProductNDC>45802-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072538</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone Dipropionate Lotion USP, 0.05% is a medium-potency corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years and older.</IndicationAndUsage>
<Description>Betamethasone Dipropionate Lotion USP, 0.05% contains betamethasone dipropionate, USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has high corticosteroid activity and slight mineralocorticoid activity. Betamethasone dipropionate is the 17, 21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Lotion USP, 0.05% contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in a lotion base of carbomer homopolymer type B, isopropyl alcohol, and purified water. Sodium hydroxide is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>45802-505-14</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-505-14) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0505-14</NDC11Code>
<ProductNDC>45802-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215847</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is a white to cream white odorless crystalline powder insoluble in water. Chemically, it is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21- dipropionate. The structural formula is. Each gram of the 0.05% ointment contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in an ointment base of mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>45802-505-84</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-505-84) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0505-84</NDC11Code>
<ProductNDC>45802-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215847</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>Betamethasone dipropionate ointment contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for dermatologic use. Betamethasone, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is a white to cream white odorless crystalline powder insoluble in water. Chemically, it is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21- dipropionate. The structural formula is. Each gram of the 0.05% ointment contains 0.64 mg betamethasone dipropionate (equivalent to 0.5 mg betamethasone) in an ointment base of mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>45802-608-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-608-01) / 100 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0608-01</NDC11Code>
<ProductNDC>45802-608</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcitriol</ProprietaryName>
<NonProprietaryName>Calcitriol</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120308</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA022087</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>CALCITRIOL</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>ug/g</StrengthUnit>
<Pharm_Classes>Cholecalciferol [CS], Vitamin D3 Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcitriol Ointment is a vitamin D analog indicated for the topical treatment of mild to moderate plaque psoriasis in adults and pediatric patients 2 years and older (1.1)Limitations of UseThe safety and effectiveness of Calcitriol Ointment in patients with known or suspected disorders of calcium metabolism have not been evaluated. (1.2).</IndicationAndUsage>
<Description>Calcitriol Ointment, 3 mcg/g is a vitamin D analog intended for topical application to the skin. The chemical name of the active ingredient is (5Z,7E)-9, 10-secocholesta-5,7,10(19)-triene-1α, 3β,25-triol. The structural formula is. Calcitriol is a white or almost white crystalline solid. It is practically insoluble in water, soluble in alcohol and in fatty oils. The molecular formula is C27H44O3, and the molecular weight is 416.64. Calcitriol Ointment is a translucent ointment containing 3 mcg/g (0.0003% w/w) of calcitriol, packaged in aluminum tubes with screw caps. Other components of the ointment are mineral oil, dl-α-tocopherol, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>0054-0326-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0326-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0326-56</NDC11Code>
<ProductNDC>0054-0326</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 100</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0054-0327-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0327-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0327-56</NDC11Code>
<ProductNDC>0054-0327</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 250</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0054-0328-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0328-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0328-56</NDC11Code>
<ProductNDC>0054-0328</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7516-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7516-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7516-31</NDC11Code>
<ProductNDC>0093-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>500; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7517-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7517-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7517-31</NDC11Code>
<ProductNDC>0093-7517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7518-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7518-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7518-31</NDC11Code>
<ProductNDC>0093-7518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>250; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0131-5410-70</NDCCode>
<PackageDescription>465 mL in 1 BOTTLE, PLASTIC (0131-5410-70) </PackageDescription>
<NDC11Code>00131-5410-70</NDC11Code>
<ProductNDC>0131-5410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vimpat</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100420</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022255</ApplicationNumber>
<LabelerName>UCB, Inc.</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100420</StartMarketingDatePackage>
<EndMarketingDatePackage>20230430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0143-9180-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9180-25) / 10 mL in 1 VIAL (0143-9180-01) </PackageDescription>
<NDC11Code>00143-9180-25</NDC11Code>
<ProductNDC>0143-9180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213071</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>0143-9184-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9184-25) / 50 mL in 1 VIAL (0143-9184-01) </PackageDescription>
<NDC11Code>00143-9184-25</NDC11Code>
<ProductNDC>0143-9184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213071</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>0143-9185-20</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (0143-9185-20) / 100 mL in 1 VIAL (0143-9185-01) </PackageDescription>
<NDC11Code>00143-9185-20</NDC11Code>
<ProductNDC>0143-9185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213071</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>0254-3010-08</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (0254-3010-08)</PackageDescription>
<NDC11Code>00254-3010-08</NDC11Code>
<ProductNDC>0254-3010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omega-3-acid Ethyl Esters</ProprietaryName>
<NonProprietaryName>Omega-3-acid Ethyl Esters</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203893</ApplicationNumber>
<LabelerName>Par Pharmaceutical Inc.</LabelerName>
<SubstanceName>OMEGA-3-ACID ETHYL ESTERS</SubstanceName>
<StrengthNumber>900</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Fatty Acids, Omega-3 [CS], Omega-3 Fatty Acid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omega-3-acid ethyl esters capsules, USP are indicated as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia (HTG). Usage Considerations: Patients should be placed on an appropriate lipid-lowering diet before receiving omega-3-acid ethyl esters capsules, USP and should continue this diet during treatment with omega-3-acid ethyl esters capsules, USP. Laboratory studies should be done to ascertain that the lipid levels are consistently abnormal before instituting therapy with omega-3-acid ethyl esters. Every attempt should be made to control serum lipids with appropriate diet, exercise, weight loss in obese patients, and control of any medical problems such as diabetes mellitus and hypothyroidism that are contributing to the lipid abnormalities. Medications known to exacerbate hypertriglyceridemia (such as beta blockers, thiazides, estrogens) should be discontinued or changed if possible prior to consideration of triglyceride-lowering drug therapy. Limitations of Use:. The effect of omega-3-acid ethyl esters capsules, USP on the risk for pancreatitis has not been determined. The effect of omega-3-acid ethyl esters capsules, USP on cardiovascular mortality and morbidity has not been determined.</IndicationAndUsage>
<Description>Omega-3-acid ethyl esters capsules, USP, a lipid-regulating agent, are supplied as a liquid-filled gel capsule for oral administration. Each 1-gram capsule of omega-3-acid ethyl esters capsules, USP contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EPA - approximately 465 mg) and docosahexaenoic acid (DHA - approximately 375 mg). The empirical formula of EPA ethyl ester is C22H34O2, and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is:. The empirical formula of DHA ethyl ester is C24H36O2, and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is. Omega-3-acid ethyl esters capsules, USP also contain the following inactive ingredients: gelatin, glycerin, purified water and opacode white ink (contains shellac glaze, titanium dioxide, purified water, N-butyl alcohol, lecithin and simethicone).</Description>
</NDC>
</NDCList>