{
"NDC": [
{
"NDCCode": "45802-580-62",
"PackageDescription": "24 POUCH in 1 CARTON (45802-580-62) / 1 PATCH, EXTENDED RELEASE in 1 POUCH",
"NDC11Code": "45802-0580-62",
"ProductNDC": "45802-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine Transdermal System",
"NonProprietaryName": "Scopolamine Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170613",
"EndMarketingDate": "20280630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078830",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170613",
"EndMarketingDatePackage": "20280630",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "45802-580-01",
"PackageDescription": "1 PATCH, EXTENDED RELEASE in 1 POUCH (45802-580-01) ",
"NDC11Code": "45802-0580-01",
"ProductNDC": "45802-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine Transdermal System",
"NonProprietaryName": "Scopolamine Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078830",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170613",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "45802-580-46",
"PackageDescription": "10 POUCH in 1 CARTON (45802-580-46) / 1 PATCH, EXTENDED RELEASE in 1 POUCH",
"NDC11Code": "45802-0580-46",
"ProductNDC": "45802-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine Transdermal System",
"NonProprietaryName": "Scopolamine Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170613",
"EndMarketingDate": "20280630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078830",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170613",
"EndMarketingDatePackage": "20280630",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "45802-580-84",
"PackageDescription": "4 POUCH in 1 CARTON (45802-580-84) / 1 PATCH, EXTENDED RELEASE in 1 POUCH",
"NDC11Code": "45802-0580-84",
"ProductNDC": "45802-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine Transdermal System",
"NonProprietaryName": "Scopolamine Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20170613",
"EndMarketingDate": "20280630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078830",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170613",
"EndMarketingDatePackage": "20280630",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "45802-076-62",
"PackageDescription": "24 PACKET in 1 CARTON (45802-076-62) > 250 mg in 1 PACKET (45802-076-00)",
"NDC11Code": "45802-0076-62",
"ProductNDC": "45802-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Imiquimod",
"NonProprietaryName": "Imiquimod",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100420",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020723",
"LabelerName": "Perrigo New York Inc.",
"SubstanceName": "IMIQUIMOD",
"StrengthNumber": "50",
"StrengthUnit": "mg/1000mg",
"Pharm_Classes": "Increased Cytokine Activity [PE],Increased Cytokine Production [PE],Interferon Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-11-01"
},
{
"NDCCode": "45802-147-62",
"PackageDescription": "24 BLISTER PACK in 1 CARTON (45802-147-62) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "45802-0147-62",
"ProductNDC": "45802-147",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cetirizine Hydrochloride And Pseudoephedrine Hydrochloride",
"NonProprietaryName": "Cetirizine Hydrochloride, Pseudoephedrine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210719",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "5; 120",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200331",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:. runny nose. sneezing. itchy, watery eyes. itching of the nose or throat. nasal congestion. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "45802-368-62",
"PackageDescription": "24 PACKET in 1 CARTON (45802-368-62) / .25 g in 1 PACKET",
"NDC11Code": "45802-0368-62",
"ProductNDC": "45802-368",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Imiquimod",
"NonProprietaryName": "Imiquimod",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078837",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "IMIQUIMOD",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/.25g",
"Pharm_Classes": "Increased Cytokine Activity [PE], Increased Cytokine Production [PE], Interferon Inducers [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101109",
"SamplePackage": "N",
"IndicationAndUsage": "Imiquimod Cream is indicated for the topical treatment of. Clinically typical, nonhyperkeratotic, nonhypertrophic actinic keratoses (AK) on the face or scalp in immunocompetent adults. (1.1). Biopsy-confirmed, primary superficial basal cell carcinoma (sBCC) in immunocompetent adults with a maximum tumor diameter of 2.0 cm on trunk (excluding anogenital skin), neck, or extremities (excluding hands and feet), only when surgical methods are medically less appropriate and patient follow-up can be reasonably assured. (1.2). External genital and perianal warts (EGW) in immunocompetent patients 12 years of age and older. (1.3).",
"Description": "Imiquimod Cream USP, 5% is an immune response modifier for topical administration. Each gram contains 50 mg of imiquimod in an off-white oil-in-water vanishing cream base consisting of benzyl alcohol, cetyl alcohol, glycerin, methylparaben, oleic acid, oleyl alcohol, polysorbate 60, propylparaben, purified water, stearyl alcohol, sorbitan monostearate, white petrolatum, and xanthan gum. Chemically, imiquimod is 1-(2-methylpropyl)-1H-imidazo[4,5-c]quinolin-4-amine. Imiquimod has a molecular formula of C14H16N4 and a molecular weight of 240.3. Its structural formula is."
},
{
"NDCCode": "45802-432-62",
"PackageDescription": "24 BLISTER PACK in 1 CARTON (45802-432-62) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "45802-0432-62",
"ProductNDC": "45802-432",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pseudoephedrine Hydrochloride",
"NonProprietaryName": "Pseudoephedrine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081017",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081017",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves sinus congestion and pressure. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies."
},
{
"NDCCode": "45802-721-62",
"PackageDescription": "24 BLISTER PACK in 1 CARTON (45802-721-62) > 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "45802-0721-62",
"ProductNDC": "45802-721",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cetirizine Hydrochloride And Pseudoephedrine Hydrochloride",
"NonProprietaryName": "Cetirizine Hcl, Pseudoephedrine Hcl",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077170",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "5; 120",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20080410",
"SamplePackage": "N"
},
{
"NDCCode": "65862-580-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (65862-580-01) ",
"NDC11Code": "65862-0580-01",
"ProductNDC": "65862-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202759",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120629",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2."
},
{
"NDCCode": "65862-580-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (65862-580-05) ",
"NDC11Code": "65862-0580-05",
"ProductNDC": "65862-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202759",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120629",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2."
},
{
"NDCCode": "65862-580-99",
"PackageDescription": "1000 TABLET in 1 BOTTLE (65862-580-99) ",
"NDC11Code": "65862-0580-99",
"ProductNDC": "65862-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202759",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120629",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2."
},
{
"NDCCode": "45802-440-75",
"PackageDescription": "1 TUBE in 1 CARTON (45802-440-75) / 5 g in 1 TUBE",
"NDC11Code": "45802-0440-75",
"ProductNDC": "45802-440",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penciclovir",
"NonProprietaryName": "Penciclovir",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212368",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "PENCICLOVIR",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Active",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241107",
"SamplePackage": "N",
"IndicationAndUsage": "Penciclovir Cream, 1% is a deoxynucleoside analog HSV DNA polymerase inhibitor indicated for the treatment of recurrent herpes labialis (cold sores) in adults and children 12 years of age or older.",
"Description": "Penciclovir Cream, 1% contains penciclovir, an antiviral agent active against herpes viruses. Penciclovir Cream, 1% is available for topical administration as a 1% white cream. Each gram of Penciclovir Cream, 1% contains 10 mg of penciclovir and the following inactive ingredients: cetostearyl alcohol, mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, purified water and white petrolatum. Chemically, penciclovir is known as 9-[4-hydroxy-3-(hydroxymethyl)butyl] guanine. Its molecular formula is C10H15N5O3; its molecular weight is 253.26. It is a synthetic acyclic guanine derivative and has the following structure. Figure 1: Structural Formula of Penciclovir. penciclovir. Penciclovir is a white to pale yellow solid. At 20°C it has a solubility of 0.2 mg/mL in methanol, 1.3 mg/mL in propylene glycol, and 1.7 mg/mL in water. In aqueous buffer (pH 2) the solubility is 10.0 mg/mL. Penciclovir is not hygroscopic. Its partition coefficient in n-octanol/water at pH 7.5 is 0.024 (logP = -1.62)."
},
{
"NDCCode": "59088-391-00",
"PackageDescription": "1 KIT in 1 CARTON (59088-391-00) * 237 mL in 1 BOTTLE, PLASTIC (0116-1061-08) * 118 mL in 1 TUBE (59088-333-08) * 1 TUBE in 1 CARTON (45802-112-22) / 22 g in 1 TUBE",
"NDC11Code": "59088-0391-00",
"ProductNDC": "59088-391",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dermacinrx Clorhexacin",
"NonProprietaryName": "Mupirocin Ointment",
"DosageFormName": "KIT",
"StartMarketingDate": "20160602",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "PureTek Corporation",
"Status": "Active",
"LastUpdate": "2024-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160602",
"SamplePackage": "N",
"Description": "Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9 and the molecular weight is 500.62. The chemical structure is:."
},
{
"NDCCode": "69329-270-01",
"PackageDescription": "1 KIT in 1 KIT (69329-270-01) * 237 mL in 1 BOTTLE, PLASTIC (0116-1061-08) * 118 mL in 1 TUBE (69329-253-02) * 22 g in 1 TUBE (45802-112-22)",
"NDC11Code": "69329-0270-01",
"ProductNDC": "69329-270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dermawerx Surgical Plus Pak",
"NonProprietaryName": "Mupirocin Ointment Kit",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065123",
"LabelerName": "Patchwerx Labs, Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9 and the molecular weight is 500.62. The chemical structure is:."
},
{
"NDCCode": "0143-9533-01",
"PackageDescription": "1 VIAL in 1 BOX, UNIT-DOSE (0143-9533-01) > 25 mL in 1 VIAL",
"NDC11Code": "00143-9533-01",
"ProductNDC": "0143-9533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol Sodium",
"NonProprietaryName": "Allopurinol Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076870",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ALLOPURINOL SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040901",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol Sodium for Injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.",
"Description": "Allopurinol Sodium for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 162.5 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol Sodium for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31."
},
{
"NDCCode": "0173-0922-38",
"PackageDescription": "8 TABLET, FILM COATED in 1 BOTTLE (0173-0922-38) ",
"NDC11Code": "00173-0922-38",
"ProductNDC": "0173-0922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Blujepa",
"NonProprietaryName": "Gepotidacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250325",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA218230",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "GEPOTIDACIN MESYLATE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Topoisomerase 2 Inhibitors [MoA], Topoisomerase 4 Inhibitors [MoA], Triazaacenaphthylene Bacterial Type II Topoisomerase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251211",
"SamplePackage": "N",
"IndicationAndUsage": "BLUJEPA is a triazaacenaphthylene bacterial type II topoisomerase inhibitor indicated for the treatment of the following infections caused by susceptible microorganisms: 1 Uncomplicated urinary tract infections (uUTI) in female adult and pediatric patients 12 years of age and older weighing at least 40 kilograms (kg). (1.1), 2 Uncomplicated urogenital gonorrhea in adult and pediatric patients 12 years of age and older weighing at least 45 kilograms who have limited or no alternative treatment options. Approval of this indication is based on limited clinical safety data for this indication. (1.2, 6.1).",
"Description": "BLUJEPA tablets contain gepotidacin mesylate, a triazaacenaphthylene antibacterial that inhibits bacterial DNA gyrase and topoisomerase IV. The chemical name is (R)-2-((4-(((3,4-dihydro-2H-pyrano[2,3-c]pyridin-6-yl)methyl)amino)piperidin-1-yl)methyl)-1,2-dihydro-3H,8H-2a,5,8a-triazaacenaphthylene-3,8-dione methanesulfonate dihydrate. The molecular formula is C24H28N6O3●CH4O3S●2H2O and its molecular mass is 580.66. The structural formula is shown below. *stereogenic center. Each BLUJEPA oral tablet contains gepotidacin 750 mg (equivalent to 910.7 mg of gepotidacin mesylate [anhydrous]). Inactive ingredients include colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "0173-0922-45",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (0173-0922-45) ",
"NDC11Code": "00173-0922-45",
"ProductNDC": "0173-0922",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Blujepa",
"NonProprietaryName": "Gepotidacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250325",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA218230",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "GEPOTIDACIN MESYLATE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Topoisomerase 2 Inhibitors [MoA], Topoisomerase 4 Inhibitors [MoA], Triazaacenaphthylene Bacterial Type II Topoisomerase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250325",
"SamplePackage": "N",
"IndicationAndUsage": "BLUJEPA is a triazaacenaphthylene bacterial type II topoisomerase inhibitor indicated for the treatment of the following infections caused by susceptible microorganisms: 1 Uncomplicated urinary tract infections (uUTI) in female adult and pediatric patients 12 years of age and older weighing at least 40 kilograms (kg). (1.1), 2 Uncomplicated urogenital gonorrhea in adult and pediatric patients 12 years of age and older weighing at least 45 kilograms who have limited or no alternative treatment options. Approval of this indication is based on limited clinical safety data for this indication. (1.2, 6.1).",
"Description": "BLUJEPA tablets contain gepotidacin mesylate, a triazaacenaphthylene antibacterial that inhibits bacterial DNA gyrase and topoisomerase IV. The chemical name is (R)-2-((4-(((3,4-dihydro-2H-pyrano[2,3-c]pyridin-6-yl)methyl)amino)piperidin-1-yl)methyl)-1,2-dihydro-3H,8H-2a,5,8a-triazaacenaphthylene-3,8-dione methanesulfonate dihydrate. The molecular formula is C24H28N6O3●CH4O3S●2H2O and its molecular mass is 580.66. The structural formula is shown below. *stereogenic center. Each BLUJEPA oral tablet contains gepotidacin 750 mg (equivalent to 910.7 mg of gepotidacin mesylate [anhydrous]). Inactive ingredients include colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "0338-0644-03",
"PackageDescription": "500 mL in 1 BAG (0338-0644-03) ",
"NDC11Code": "00338-0644-03",
"ProductNDC": "0338-0644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travasol",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840823",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018931",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE",
"StrengthNumber": "730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840823",
"SamplePackage": "N",
"IndicationAndUsage": "TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.",
"Description": "TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0644-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0644-04) ",
"NDC11Code": "00338-0644-04",
"ProductNDC": "0338-0644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travasol",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840823",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018931",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE",
"StrengthNumber": "730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840823",
"SamplePackage": "N",
"IndicationAndUsage": "TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.",
"Description": "TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0644-06",
"PackageDescription": "2000 mL in 1 BAG (0338-0644-06) ",
"NDC11Code": "00338-0644-06",
"ProductNDC": "0338-0644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Travasol",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19840823",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018931",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE",
"StrengthNumber": "730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19840823",
"SamplePackage": "N",
"IndicationAndUsage": "TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.",
"Description": "TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-4210-02",
"PackageDescription": "1 KIT in 1 CARTON (0338-4210-02) * 1 mL in 1 VIAL, GLASS (0338-7112-01) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) ",
"NDC11Code": "00338-4210-02",
"ProductNDC": "0338-4210",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4211-04",
"PackageDescription": "1 KIT in 1 CARTON (0338-4211-04) * 2 mL in 1 VIAL, GLASS (0338-7112-02) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) ",
"NDC11Code": "00338-4211-04",
"ProductNDC": "0338-4211",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4212-10",
"PackageDescription": "1 KIT in 1 CARTON (0338-4212-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) ",
"NDC11Code": "00338-4212-10",
"ProductNDC": "0338-4212",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4301-02",
"PackageDescription": "1 KIT in 1 CARTON (0338-4301-02) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) * 1 mL in 1 VIAL, GLASS (0338-7112-01) ",
"NDC11Code": "00338-4301-02",
"ProductNDC": "0338-4301",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4302-04",
"PackageDescription": "1 KIT in 1 CARTON (0338-4302-04) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) * 2 mL in 1 VIAL, GLASS (0338-7112-02) ",
"NDC11Code": "00338-4302-04",
"ProductNDC": "0338-4302",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-4303-10",
"PackageDescription": "1 KIT in 1 CARTON (0338-4303-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) ",
"NDC11Code": "00338-4303-10",
"ProductNDC": "0338-4303",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "KIT",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-8402-02",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-02) / 2 mL in 1 SYRINGE, PLASTIC (0338-8402-01) ",
"NDC11Code": "00338-8402-02",
"ProductNDC": "0338-8402",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FIBRINOGEN HUMAN; HUMAN THROMBIN",
"StrengthNumber": "90; 500",
"StrengthUnit": "mg/mL; [iU]/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-8402-04",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-04) / 4 mL in 1 SYRINGE, PLASTIC (0338-8402-03) ",
"NDC11Code": "00338-8402-04",
"ProductNDC": "0338-8402",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FIBRINOGEN HUMAN; HUMAN THROMBIN",
"StrengthNumber": "90; 500",
"StrengthUnit": "mg/mL; [iU]/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
},
{
"NDCCode": "0338-8402-10",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-10) / 10 mL in 1 SYRINGE, PLASTIC (0338-8402-09) ",
"NDC11Code": "00338-8402-10",
"ProductNDC": "0338-8402",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Tisseel",
"ProprietaryNameSuffix": "Fibrin Sealant",
"NonProprietaryName": "Fibrinogen Human, Human Thrombin",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19980501",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103980",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FIBRINOGEN HUMAN; HUMAN THROMBIN",
"StrengthNumber": "90; 500",
"StrengthUnit": "mg/mL; [iU]/mL",
"Pharm_Classes": "Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "19980501",
"SamplePackage": "N",
"IndicationAndUsage": "Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.",
"Description": "TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>45802-580-62</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (45802-580-62) / 1 PATCH, EXTENDED RELEASE in 1 POUCH</PackageDescription>
<NDC11Code>45802-0580-62</NDC11Code>
<ProductNDC>45802-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine Transdermal System</ProprietaryName>
<NonProprietaryName>Scopolamine Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170613</StartMarketingDate>
<EndMarketingDate>20280630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078830</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170613</StartMarketingDatePackage>
<EndMarketingDatePackage>20280630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>45802-580-01</NDCCode>
<PackageDescription>1 PATCH, EXTENDED RELEASE in 1 POUCH (45802-580-01) </PackageDescription>
<NDC11Code>45802-0580-01</NDC11Code>
<ProductNDC>45802-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine Transdermal System</ProprietaryName>
<NonProprietaryName>Scopolamine Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078830</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>45802-580-46</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (45802-580-46) / 1 PATCH, EXTENDED RELEASE in 1 POUCH</PackageDescription>
<NDC11Code>45802-0580-46</NDC11Code>
<ProductNDC>45802-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine Transdermal System</ProprietaryName>
<NonProprietaryName>Scopolamine Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170613</StartMarketingDate>
<EndMarketingDate>20280630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078830</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170613</StartMarketingDatePackage>
<EndMarketingDatePackage>20280630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>45802-580-84</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (45802-580-84) / 1 PATCH, EXTENDED RELEASE in 1 POUCH</PackageDescription>
<NDC11Code>45802-0580-84</NDC11Code>
<ProductNDC>45802-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine Transdermal System</ProprietaryName>
<NonProprietaryName>Scopolamine Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20170613</StartMarketingDate>
<EndMarketingDate>20280630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078830</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170613</StartMarketingDatePackage>
<EndMarketingDatePackage>20280630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is:. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>45802-076-62</NDCCode>
<PackageDescription>24 PACKET in 1 CARTON (45802-076-62) > 250 mg in 1 PACKET (45802-076-00)</PackageDescription>
<NDC11Code>45802-0076-62</NDC11Code>
<ProductNDC>45802-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Imiquimod</ProprietaryName>
<NonProprietaryName>Imiquimod</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100420</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020723</ApplicationNumber>
<LabelerName>Perrigo New York Inc.</LabelerName>
<SubstanceName>IMIQUIMOD</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1000mg</StrengthUnit>
<Pharm_Classes>Increased Cytokine Activity [PE],Increased Cytokine Production [PE],Interferon Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>45802-147-62</NDCCode>
<PackageDescription>24 BLISTER PACK in 1 CARTON (45802-147-62) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>45802-0147-62</NDC11Code>
<ProductNDC>45802-147</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cetirizine Hydrochloride And Pseudoephedrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cetirizine Hydrochloride, Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210719</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 120</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:. runny nose. sneezing. itchy, watery eyes. itching of the nose or throat. nasal congestion. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>45802-368-62</NDCCode>
<PackageDescription>24 PACKET in 1 CARTON (45802-368-62) / .25 g in 1 PACKET</PackageDescription>
<NDC11Code>45802-0368-62</NDC11Code>
<ProductNDC>45802-368</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Imiquimod</ProprietaryName>
<NonProprietaryName>Imiquimod</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078837</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>IMIQUIMOD</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/.25g</StrengthUnit>
<Pharm_Classes>Increased Cytokine Activity [PE], Increased Cytokine Production [PE], Interferon Inducers [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Imiquimod Cream is indicated for the topical treatment of. Clinically typical, nonhyperkeratotic, nonhypertrophic actinic keratoses (AK) on the face or scalp in immunocompetent adults. (1.1). Biopsy-confirmed, primary superficial basal cell carcinoma (sBCC) in immunocompetent adults with a maximum tumor diameter of 2.0 cm on trunk (excluding anogenital skin), neck, or extremities (excluding hands and feet), only when surgical methods are medically less appropriate and patient follow-up can be reasonably assured. (1.2). External genital and perianal warts (EGW) in immunocompetent patients 12 years of age and older. (1.3).</IndicationAndUsage>
<Description>Imiquimod Cream USP, 5% is an immune response modifier for topical administration. Each gram contains 50 mg of imiquimod in an off-white oil-in-water vanishing cream base consisting of benzyl alcohol, cetyl alcohol, glycerin, methylparaben, oleic acid, oleyl alcohol, polysorbate 60, propylparaben, purified water, stearyl alcohol, sorbitan monostearate, white petrolatum, and xanthan gum. Chemically, imiquimod is 1-(2-methylpropyl)-1H-imidazo[4,5-c]quinolin-4-amine. Imiquimod has a molecular formula of C14H16N4 and a molecular weight of 240.3. Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>45802-432-62</NDCCode>
<PackageDescription>24 BLISTER PACK in 1 CARTON (45802-432-62) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>45802-0432-62</NDC11Code>
<ProductNDC>45802-432</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pseudoephedrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081017</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves sinus congestion and pressure. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>45802-721-62</NDCCode>
<PackageDescription>24 BLISTER PACK in 1 CARTON (45802-721-62) > 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>45802-0721-62</NDC11Code>
<ProductNDC>45802-721</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cetirizine Hydrochloride And Pseudoephedrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cetirizine Hcl, Pseudoephedrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077170</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 120</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65862-580-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (65862-580-01) </PackageDescription>
<NDC11Code>65862-0580-01</NDC11Code>
<ProductNDC>65862-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202759</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120629</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>65862-580-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (65862-580-05) </PackageDescription>
<NDC11Code>65862-0580-05</NDC11Code>
<ProductNDC>65862-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202759</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120629</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>65862-580-99</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (65862-580-99) </PackageDescription>
<NDC11Code>65862-0580-99</NDC11Code>
<ProductNDC>65862-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202759</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120629</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14.1)]. Limitations of UseGlimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride tablets, USP are an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride USP is a white or almost white powder and is practically insoluble in water.The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. In addition, 1 mg contains ferric oxide red, 2 mg contains ferric oxide yellow and FD&C blue No. 2, and 4 mg contains FD&C blue No. 2.</Description>
</NDC>
<NDC>
<NDCCode>45802-440-75</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-440-75) / 5 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0440-75</NDC11Code>
<ProductNDC>45802-440</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penciclovir</ProprietaryName>
<NonProprietaryName>Penciclovir</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212368</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>PENCICLOVIR</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penciclovir Cream, 1% is a deoxynucleoside analog HSV DNA polymerase inhibitor indicated for the treatment of recurrent herpes labialis (cold sores) in adults and children 12 years of age or older.</IndicationAndUsage>
<Description>Penciclovir Cream, 1% contains penciclovir, an antiviral agent active against herpes viruses. Penciclovir Cream, 1% is available for topical administration as a 1% white cream. Each gram of Penciclovir Cream, 1% contains 10 mg of penciclovir and the following inactive ingredients: cetostearyl alcohol, mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, purified water and white petrolatum. Chemically, penciclovir is known as 9-[4-hydroxy-3-(hydroxymethyl)butyl] guanine. Its molecular formula is C10H15N5O3; its molecular weight is 253.26. It is a synthetic acyclic guanine derivative and has the following structure. Figure 1: Structural Formula of Penciclovir. penciclovir. Penciclovir is a white to pale yellow solid. At 20°C it has a solubility of 0.2 mg/mL in methanol, 1.3 mg/mL in propylene glycol, and 1.7 mg/mL in water. In aqueous buffer (pH 2) the solubility is 10.0 mg/mL. Penciclovir is not hygroscopic. Its partition coefficient in n-octanol/water at pH 7.5 is 0.024 (logP = -1.62).</Description>
</NDC>
<NDC>
<NDCCode>59088-391-00</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (59088-391-00) * 237 mL in 1 BOTTLE, PLASTIC (0116-1061-08) * 118 mL in 1 TUBE (59088-333-08) * 1 TUBE in 1 CARTON (45802-112-22) / 22 g in 1 TUBE</PackageDescription>
<NDC11Code>59088-0391-00</NDC11Code>
<ProductNDC>59088-391</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dermacinrx Clorhexacin</ProprietaryName>
<NonProprietaryName>Mupirocin Ointment</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20160602</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>PureTek Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9 and the molecular weight is 500.62. The chemical structure is:.</Description>
</NDC>
<NDC>
<NDCCode>69329-270-01</NDCCode>
<PackageDescription>1 KIT in 1 KIT (69329-270-01) * 237 mL in 1 BOTTLE, PLASTIC (0116-1061-08) * 118 mL in 1 TUBE (69329-253-02) * 22 g in 1 TUBE (45802-112-22)</PackageDescription>
<NDC11Code>69329-0270-01</NDC11Code>
<ProductNDC>69329-270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dermawerx Surgical Plus Pak</ProprietaryName>
<NonProprietaryName>Mupirocin Ointment Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065123</ApplicationNumber>
<LabelerName>Patchwerx Labs, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E)-(2 S,3 R,4 R,5 S)-5-[(2 S,3 S,4 S,5 S)-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26H 44O 9 and the molecular weight is 500.62. The chemical structure is:.</Description>
</NDC>
<NDC>
<NDCCode>0143-9533-01</NDCCode>
<PackageDescription>1 VIAL in 1 BOX, UNIT-DOSE (0143-9533-01) > 25 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9533-01</NDC11Code>
<ProductNDC>0143-9533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol Sodium</ProprietaryName>
<NonProprietaryName>Allopurinol Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076870</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALLOPURINOL SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol Sodium for Injection is indicated for the management of adult and pediatric patients with leukemia, lymphoma, and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels and who cannot tolerate oral therapy.</IndicationAndUsage>
<Description>Allopurinol Sodium for Injection, a xanthine oxidase inhibitor, is a sterile, white, lyophilized powder or cake, in a single-dose vial for reconstitution. Each vial contains 500 mg of allopurinol equivalent to 580.7 mg of allopurinol sodium and 162.5 mg of sodium hydroxide as a solubilizer. Sodium hydroxide is also used as a pH adjuster. Allopurinol Sodium for Injection contains no preservatives. Allopurinol is a xanthine oxidase inhibitor. The chemical name for allopurinol sodium is 1,5-dihydro-4H-pyrazolo[3,4-d]pyrimidin-4-one monosodium salt. It is a white amorphous mass with a molecular weight of 158.09 and molecular formula C5H3N4NaO. The structural formula is. The pKa of allopurinol sodium is 9.31.</Description>
</NDC>
<NDC>
<NDCCode>0173-0922-38</NDCCode>
<PackageDescription>8 TABLET, FILM COATED in 1 BOTTLE (0173-0922-38) </PackageDescription>
<NDC11Code>00173-0922-38</NDC11Code>
<ProductNDC>0173-0922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Blujepa</ProprietaryName>
<NonProprietaryName>Gepotidacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250325</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA218230</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>GEPOTIDACIN MESYLATE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Topoisomerase 2 Inhibitors [MoA], Topoisomerase 4 Inhibitors [MoA], Triazaacenaphthylene Bacterial Type II Topoisomerase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BLUJEPA is a triazaacenaphthylene bacterial type II topoisomerase inhibitor indicated for the treatment of the following infections caused by susceptible microorganisms: 1 Uncomplicated urinary tract infections (uUTI) in female adult and pediatric patients 12 years of age and older weighing at least 40 kilograms (kg). (1.1), 2 Uncomplicated urogenital gonorrhea in adult and pediatric patients 12 years of age and older weighing at least 45 kilograms who have limited or no alternative treatment options. Approval of this indication is based on limited clinical safety data for this indication. (1.2, 6.1).</IndicationAndUsage>
<Description>BLUJEPA tablets contain gepotidacin mesylate, a triazaacenaphthylene antibacterial that inhibits bacterial DNA gyrase and topoisomerase IV. The chemical name is (R)-2-((4-(((3,4-dihydro-2H-pyrano[2,3-c]pyridin-6-yl)methyl)amino)piperidin-1-yl)methyl)-1,2-dihydro-3H,8H-2a,5,8a-triazaacenaphthylene-3,8-dione methanesulfonate dihydrate. The molecular formula is C24H28N6O3●CH4O3S●2H2O and its molecular mass is 580.66. The structural formula is shown below. *stereogenic center. Each BLUJEPA oral tablet contains gepotidacin 750 mg (equivalent to 910.7 mg of gepotidacin mesylate [anhydrous]). Inactive ingredients include colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0173-0922-45</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (0173-0922-45) </PackageDescription>
<NDC11Code>00173-0922-45</NDC11Code>
<ProductNDC>0173-0922</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Blujepa</ProprietaryName>
<NonProprietaryName>Gepotidacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250325</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA218230</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>GEPOTIDACIN MESYLATE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Topoisomerase 2 Inhibitors [MoA], Topoisomerase 4 Inhibitors [MoA], Triazaacenaphthylene Bacterial Type II Topoisomerase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BLUJEPA is a triazaacenaphthylene bacterial type II topoisomerase inhibitor indicated for the treatment of the following infections caused by susceptible microorganisms: 1 Uncomplicated urinary tract infections (uUTI) in female adult and pediatric patients 12 years of age and older weighing at least 40 kilograms (kg). (1.1), 2 Uncomplicated urogenital gonorrhea in adult and pediatric patients 12 years of age and older weighing at least 45 kilograms who have limited or no alternative treatment options. Approval of this indication is based on limited clinical safety data for this indication. (1.2, 6.1).</IndicationAndUsage>
<Description>BLUJEPA tablets contain gepotidacin mesylate, a triazaacenaphthylene antibacterial that inhibits bacterial DNA gyrase and topoisomerase IV. The chemical name is (R)-2-((4-(((3,4-dihydro-2H-pyrano[2,3-c]pyridin-6-yl)methyl)amino)piperidin-1-yl)methyl)-1,2-dihydro-3H,8H-2a,5,8a-triazaacenaphthylene-3,8-dione methanesulfonate dihydrate. The molecular formula is C24H28N6O3●CH4O3S●2H2O and its molecular mass is 580.66. The structural formula is shown below. *stereogenic center. Each BLUJEPA oral tablet contains gepotidacin 750 mg (equivalent to 910.7 mg of gepotidacin mesylate [anhydrous]). Inactive ingredients include colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0338-0644-03</NDCCode>
<PackageDescription>500 mL in 1 BAG (0338-0644-03) </PackageDescription>
<NDC11Code>00338-0644-03</NDC11Code>
<ProductNDC>0338-0644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travasol</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840823</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018931</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE</SubstanceName>
<StrengthNumber>730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0644-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0644-04) </PackageDescription>
<NDC11Code>00338-0644-04</NDC11Code>
<ProductNDC>0338-0644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travasol</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840823</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018931</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE</SubstanceName>
<StrengthNumber>730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0644-06</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-0644-06) </PackageDescription>
<NDC11Code>00338-0644-06</NDC11Code>
<ProductNDC>0338-0644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Travasol</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine Hydrochloride, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Tyrosine, Serine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19840823</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018931</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE HYDROCHLORIDE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; TYROSINE; SERINE</SubstanceName>
<StrengthNumber>730; 560; 580; 400; 600; 580; 480; 420; 180; 2.07; 1.03; 1.15; 680; 40; 500</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL; g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRAVASOL is indicated as a source of amino acids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. TRAVASOL may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>TRAVASOL 10% (amino acids) injection is a sterile, nonpyrogenic hypertonic solution of essential and nonessential amino acids supplied in a flexible container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program [see Dosage and Administration (2.1)]. TRAVASOL is not for direct intravenous infusion. The formulas for the individual amino acids found in TRAVASOL are provided in Table 4. TRAVASOL contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-4210-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4210-02) * 1 mL in 1 VIAL, GLASS (0338-7112-01) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) </PackageDescription>
<NDC11Code>00338-4210-02</NDC11Code>
<ProductNDC>0338-4210</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4211-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4211-04) * 2 mL in 1 VIAL, GLASS (0338-7112-02) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) </PackageDescription>
<NDC11Code>00338-4211-04</NDC11Code>
<ProductNDC>0338-4211</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4212-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4212-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
<NDC11Code>00338-4212-10</NDC11Code>
<ProductNDC>0338-4212</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4301-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4301-02) * 1 mL in 1 VIAL, GLASS (0338-7332-01) * 1 mL in 1 VIAL, GLASS (0338-7201-01) * 1 mL in 1 VIAL, GLASS (0338-7401-01) * 1 mL in 1 VIAL, GLASS (0338-7112-01) </PackageDescription>
<NDC11Code>00338-4301-02</NDC11Code>
<ProductNDC>0338-4301</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4302-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4302-04) * 2 mL in 1 VIAL, GLASS (0338-7332-02) * 2 mL in 1 VIAL, GLASS (0338-7201-02) * 2 mL in 1 VIAL, GLASS (0338-7401-02) * 2 mL in 1 VIAL, GLASS (0338-7112-02) </PackageDescription>
<NDC11Code>00338-4302-04</NDC11Code>
<ProductNDC>0338-4302</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-4303-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0338-4303-10) * 5 mL in 1 VIAL, GLASS (0338-7332-05) * 5 mL in 1 VIAL, GLASS (0338-7201-05) * 5 mL in 1 VIAL, GLASS (0338-7401-05) * 5 mL in 1 VIAL, GLASS (0338-7112-05) </PackageDescription>
<NDC11Code>00338-4303-10</NDC11Code>
<ProductNDC>0338-4303</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated in adult and pediatric patients as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin (Synthetic) solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) Solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor-heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-8402-02</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-02) / 2 mL in 1 SYRINGE, PLASTIC (0338-8402-01) </PackageDescription>
<NDC11Code>00338-8402-02</NDC11Code>
<ProductNDC>0338-8402</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
<StrengthNumber>90; 500</StrengthNumber>
<StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-8402-04</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-04) / 4 mL in 1 SYRINGE, PLASTIC (0338-8402-03) </PackageDescription>
<NDC11Code>00338-8402-04</NDC11Code>
<ProductNDC>0338-8402</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
<StrengthNumber>90; 500</StrengthNumber>
<StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
<NDC>
<NDCCode>0338-8402-10</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0338-8402-10) / 10 mL in 1 SYRINGE, PLASTIC (0338-8402-09) </PackageDescription>
<NDC11Code>00338-8402-10</NDC11Code>
<ProductNDC>0338-8402</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Tisseel</ProprietaryName>
<ProprietaryNameSuffix>Fibrin Sealant</ProprietaryNameSuffix>
<NonProprietaryName>Fibrinogen Human, Human Thrombin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19980501</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103980</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FIBRINOGEN HUMAN; HUMAN THROMBIN</SubstanceName>
<StrengthNumber>90; 500</StrengthNumber>
<StrengthUnit>mg/mL; [iU]/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factors [CS], Blood Coagulation Factors [CS], Human Blood Coagulation Factor [EPC], Human Blood Coagulation Factor [EPC], Increased Coagulation Activity [PE], Increased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemostasis: TISSEEL is a fibrin sealant indicated for use as an adjunct to hemostasis in adult and pediatric patients (>1 month of age) undergoing surgery when control of bleeding by conventional surgical techniques (such as suture, ligature, and cautery) is ineffective or impractical. TISSEEL is effective in heparinized patients. Sealing: TISSEEL is a fibrin sealant indicated as an adjunct to standard surgical techniques (such as suture and ligature) to prevent leakage from colonic anastomoses following the reversal of temporary colostomies.</IndicationAndUsage>
<Description>TISSEEL [Fibrin Sealant] is a two-component fibrin sealant made from pooled human plasma. When combined, the two components, Sealer Protein and Thrombin mimic the final stage of the blood coagulation cascade. Sealer Protein (Human)Sealer Protein (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Sealer Protein (Human) is provided either as a freeze-dried powder for reconstitution with Aprotinin or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. The active ingredient in Sealer Protein (Human) is fibrinogen. Sealer Protein (Human) solution contains fibrinolysis inhibitor, synthetic Aprotinin, that delays fibrinolysis. Aprotinin (Synthetic) is manufactured by solid phase synthesis from materials completely of non-human/non-animal origin. Thrombin (Human)Thrombin (Human) is a sterile, non-pyrogenic, vapor heated and solvent/detergent treated preparation made from pooled human plasma. Thrombin (Human) is also provided either as a freeze-dried powder for reconstitution with Calcium Chloride Solution or as a finished frozen solution pre-filled into one side of a dual-chambered syringe. : 1 The reconstituted solution or pre-filled syringe contains: Sealer Protein Solution, 2 Total protein: 96 – 125 mg/mL Fibrinogen: 67 – 106 mg/mLAprotinin (Synthetic): 2250 – 3750 KIU/mLOther ingredients include: human albumin, tri-sodium citrate, histidine, niacinamide, polysorbate 80 and water for injection., 3 Thrombin Solution, 4 Thrombin (Human): 400 – 625 units/mL* Calcium Chloride: 36 – 44 µmol/mLOther ingredients include: human albumin, sodium chloride and water for injection., 5 * The potency expressed in units is determined with a clotting assay using an in-house internal standard that has been calibrated against the World Health Organization (WHO) Second International Standard for Thrombin, 01/580. Therefore, a unit (U) is equivalent to an International Unit (IU).</Description>
</NDC>
</NDCList>