{
"NDC": [
{
"NDCCode": "45865-530-14",
"PackageDescription": "14 TABLET in 1 BOTTLE (45865-530-14) ",
"NDC11Code": "45865-0530-14",
"ProductNDC": "45865-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076639",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181212",
"SamplePackage": "N",
"IndicationAndUsage": "Ciprofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) o Acute Exacerbation of Chronic Bronchitis , 11 Urinary Tract Infections ( 1.11) o Urinary Tract Infections (UTI) o Acute Uncomplicated Cystitis o Complicated UTI and Pyelonephritis in Pediatric Patients , 12 Acute Sinusitis ( 1.12) .",
"Description": "Ciprofloxacin (ciprofloxacin hydrochloride) tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3 HCl H 2O and its chemical structure is as follows:. Ciprofloxacin film-coated tablets USP are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets USP are white film coated tablets. The inactive ingredients are pregelatinized starch, microcrystalline cellulose, colloidal silicon dioxide, crospovidone, magnesium stearate, hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "12634-530-54",
"PackageDescription": "14 TABLET in 1 BLISTER PACK (12634-530-54)",
"NDC11Code": "12634-0530-54",
"ProductNDC": "12634-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19590806",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011722",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"IndicationAndUsage": "Diethylpropion hydrochloride is indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches x 0.0254 = meters. The usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride is indicated for use as monotherapy only.",
"Description": "Diethylpropion hydrochloride is available for oral administration in immediate-release tablets containing 25 mg diethylpropion hydrochloride and in controlled-release tablets containing 75 mg diethylpropion hydrochloride. The inactive ingredients in each immediate-release tablet are: cornstarch, lactose, magnesium stearate, pregelatinized cornstarch, talc, and tartaric acid. The inactive ingredients in each controlled-release tablet are: carbomer 934P, mannitol, povidone, tartaric acid, zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethylamino-1-propanone hydrochloride. Its chemical structure is. The diethylpropion hydrochloride 75 mg formulation is dispersed in a hydrophilic matrix. On exposure to water, the diethylpropion hydrochloride is released at a relatively uniform rate as a result of slow hydration of the matrix. The result is controlled release of the anorectic agent."
},
{
"NDCCode": "12634-530-84",
"PackageDescription": "14 TABLET in 1 BOTTLE (12634-530-84)",
"NDC11Code": "12634-0530-84",
"ProductNDC": "12634-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19590806",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011722",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"IndicationAndUsage": "Diethylpropion hydrochloride is indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches x 0.0254 = meters. The usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride is indicated for use as monotherapy only.",
"Description": "Diethylpropion hydrochloride is available for oral administration in immediate-release tablets containing 25 mg diethylpropion hydrochloride and in controlled-release tablets containing 75 mg diethylpropion hydrochloride. The inactive ingredients in each immediate-release tablet are: cornstarch, lactose, magnesium stearate, pregelatinized cornstarch, talc, and tartaric acid. The inactive ingredients in each controlled-release tablet are: carbomer 934P, mannitol, povidone, tartaric acid, zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethylamino-1-propanone hydrochloride. Its chemical structure is. The diethylpropion hydrochloride 75 mg formulation is dispersed in a hydrophilic matrix. On exposure to water, the diethylpropion hydrochloride is released at a relatively uniform rate as a result of slow hydration of the matrix. The result is controlled release of the anorectic agent."
},
{
"NDCCode": "43063-530-14",
"PackageDescription": "14 TABLET in 1 BOTTLE, PLASTIC (43063-530-14) ",
"NDC11Code": "43063-0530-14",
"ProductNDC": "43063-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065136",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130930",
"SamplePackage": "N",
"IndicationAndUsage": "Clarithromycin is a macrolide antimicrobial indicated for mild to moderate infections caused by designated, susceptible bacteria in the following: 1 Acute Bacterial Exacerbation of Chronic Bronchitis in Adults ( 1.1) , 2 Acute Maxillary Sinusitis ( 1.2) , 3 Community-Acquired Pneumonia ( 1.3) , 4 Pharyngitis/Tonsillitis ( 1.4) , 5 Uncomplicated Skin and Skin Structure Infections ( 1.5) , 6 Acute Otitis Media in Pediatric Patients ( 1.6) , 7 Treatment and Prophylaxis of Disseminated Mycobacterial Infections ( 1.7) , 8 Helicobacter pyloriInfection and Duodenal Ulcer Disease in Adults ( 1.8) .",
"Description": "Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0‑ methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin tablets, USP are intended for oral administration and contain 250 mg or 500 mg of clarithromycin, USP. In addition, each clarithromycin tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "68382-530-14",
"PackageDescription": "60 TABLET in 1 BOTTLE (68382-530-14) ",
"NDC11Code": "68382-0530-14",
"ProductNDC": "68382-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diflunisal",
"NonProprietaryName": "Diflunisal",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203547",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "DIFLUNISAL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following. 1. Mild to moderate pain. 2. Osteoarthritis. 3. Rheumatoid arthritis.",
"Description": "Diflunisal is 2',4'-difluoro-4-hydroxy-3-biphenylcarboxylic acid. Its structural formula is. C13H8F2O3 M.W. 250.20. Diflunisal is a stable, white to off-white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in hexane and water. It is soluble in most organic solvents including acetone and ethyl acetate and it is slightly soluble in chloroform, carbon tetrachloride and methylene chloride. Each diflunisal tablet intended for oral administration contains 500 mg of diflunisal. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, microcrystalline cellulose, pregelatinised starch and sodium stearyl fumarate. Additionally, each diflunisal tablets contain opadry blue 03B505010 which contains FD&C blue #2, FD&C yellow #6, hypromellose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "70934-530-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70934-530-14) ",
"NDC11Code": "70934-0530-14",
"ProductNDC": "70934-530",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202710",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200206",
"SamplePackage": "N"
},
{
"NDCCode": "82199-530-11",
"PackageDescription": "14.2 g in 1 TUBE (82199-530-11) ",
"NDC11Code": "82199-0530-11",
"ProductNDC": "82199-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple Antibiotic",
"NonProprietaryName": "Polymyxin B Sulfate,neomycin Sulfate,bacitracin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210826",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Shandong Ruian Pharmaceutical Co.,Ltd.",
"SubstanceName": "BACITRACIN; LIDOCAINE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "500; 40; 3500; 5000",
"StrengthUnit": "[USP'U]/g; mg/g; [USP'U]/g; [USP'U]/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antiarrhythmic [EPC], Decreased Cell Wall Synthesis & Repair [PE], Local Anesthesia [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210826",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent infection and for temporary relief of pain or discomfort in minor: cuts scrapes burns."
},
{
"NDCCode": "45865-116-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (45865-116-14) ",
"NDC11Code": "45865-0116-14",
"ProductNDC": "45865-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062500",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200701",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Tablets and Capsules and Doxycycline for Oral Suspension; for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the capsule formulations are: colloidal silicon dioxide, lactose anhydrous, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and stearic acid. 50 mg gelatin capsule shell contains: FD&C Blue #1, D&C Yellow #10, titanium dioxide and gelatin. 100 mg gelatin capsule shell contains: FD&C Blue #1, titanium dioxide and gelatin. Black ink contains shellac glaze in SD-45, black iron oxide, propylene glycol, FD&C Blue #2, FD&C Red # 40, FD&C Blue # 1, D&C Yellow # 10, butyl alcohol, denatured alcohol. Each capsule, for oral administration, contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline. Inactive ingredients for the oral suspension formulation are: confectioner's sugar, D&C red #27 aluminum lake, ethyl acetate, maltodextrin, methylparaben, microcrystalline cellulose/ sodium carboxymethylcellulose, modified cornstarch, natural flavoring; propylparaben, simethicone and sucrose. When reconstituted, each teaspoonful (5 mL) doxycycline suspension, for oral administration, contains doxycycline monohydrate equivalent to 25 mg of doxycycline. Inactive ingredients for the tablet formulation are: anhydrous lactose, colloidal silicon dioxide, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, stearic acid, and titanium dioxide. Each tablet, for oral administration, contains doxycycline hyclate equivalent to 100 mg doxycycline."
},
{
"NDCCode": "45865-203-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (45865-203-14) ",
"NDC11Code": "45865-0203-14",
"ProductNDC": "45865-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209402",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220118",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae. , 3 Lymphogranuloma venereum caused by Chlamydia trachomatis. , 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci. , 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis. , 7 Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. , 8 Nongonococcal urethritis caused by Ureaplasma urealyticum. , 9 Relapsing fever due to Borrelia recurrentis. .",
"Description": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. DESCRIPTION. Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as capsules of doxycycline hyclate for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a- octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2- naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients in the capsule formulations are: FD&C Blue 1, gelatin, magnesium stearate, iron oxide, microcrystalline cellulose, potassium hydroxide, shellac, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "45865-240-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (45865-240-14) ",
"NDC11Code": "45865-0240-14",
"ProductNDC": "45865-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150923",
"EndMarketingDate": "20260601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207446",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230220",
"EndMarketingDatePackage": "20260601",
"SamplePackage": "N"
},
{
"NDCCode": "45865-244-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (45865-244-14) ",
"NDC11Code": "45865-0244-14",
"ProductNDC": "45865-244",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078643",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230307",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217ºC, and a pK aof 8.47 at 25ºC. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-( 5H-dibenzo[ a, d] cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride is supplied as 5 mg or 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch (maize) and titanium dioxide. In addition 5 mg also contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake and 10 mg also contains yellow iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "45865-444-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE, PLASTIC (45865-444-14) ",
"NDC11Code": "45865-0444-14",
"ProductNDC": "45865-444",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19860710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062676",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150826",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) capsules and tablets for oral administration. The chemical designation of this light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Doxycycline hyclate has the following structural formula. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg doxycycline (anhydrous). Inactive ingredients for capsules are: anhydrous lactose, croscarmellose sodium, D&C Red #28, FD&C Blue #1, gelatin, magnesium stearate, microcrystalline cellulose, and titanium dioxide. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg doxycycline. Inactive ingredients for tablets are: anhydrous lactose, carnauba wax, croscarmellose sodium, D&C Yellow #10 aluminum lake, FD&C Red #40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, and titanium dioxide."
},
{
"NDCCode": "45865-758-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (45865-758-14) ",
"NDC11Code": "45865-0758-14",
"ProductNDC": "45865-758",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076361",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150921",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets are indicated for the treatment of adults (≥ 18 years of age) with mild, moderate, and severe infections caused by susceptible isolates of the designated microorganisms in the conditions listed in this section. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin [ see Microbiology ( 12.4) ]. Therapy with levofloxacin tablets may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin tablets. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.",
"Description": "Levofloxacin tablets are a synthetic broad-spectrum antibacterial agent for oral administration. Chemically, levofloxacin, USP, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-( S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7 H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin, USP. C 18H 20FN 3O 4½ H 2O M.W. 370.38. Levofloxacin, USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin, USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin, USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3 > Cu +2 > Zn +2 > Mg +2 > Ca +2. Excipients and Description of Dosage Form. Levofloxacin tablets are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide red, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide."
},
{
"NDCCode": "0069-0135-01",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (0069-0135-01) ",
"NDC11Code": "00069-0135-01",
"ProductNDC": "0069-0135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120904",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0136-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-0136-01) ",
"NDC11Code": "00069-0136-01",
"ProductNDC": "0069-0136",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120904",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0193-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) ",
"NDC11Code": "00069-0193-01",
"ProductNDC": "0069-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171218",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171218",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-0504-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (0069-0504-30) ",
"NDC11Code": "00069-0504-30",
"ProductNDC": "0069-0504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217729",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0069-1014-15",
"PackageDescription": "150 CAPSULE in 1 BOTTLE (0069-1014-15) ",
"NDC11Code": "00069-1014-15",
"ProductNDC": "0069-1014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217729",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "10893-531-02",
"PackageDescription": "1 KIT in 1 KIT (10893-531-02) * 118.3 mL in 1 BOTTLE (10893-530-04) * 113.3 g in 1 CARTON (10893-660-04) ",
"NDC11Code": "10893-0531-02",
"ProductNDC": "10893-531",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naturasil Mite B Gone Treatment Kit",
"NonProprietaryName": "Sulfur, Thuja Occidentalis",
"DosageFormName": "KIT",
"StartMarketingDate": "20240212",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nature's Innovation, Inc.",
"Status": "Active",
"LastUpdate": "2024-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240212",
"SamplePackage": "N"
},
{
"NDCCode": "46708-311-35",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (46708-311-35) ",
"NDC11Code": "46708-0311-35",
"ProductNDC": "46708-311",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosutinib",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209543",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BOSUTINIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Bosutinib tablets are indicated for the treatment of. Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)]. Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water. Bosutinib tablets are supplied for oral administration in two strengths: 100 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, hypromellose, iron oxide red (for 500 mg tablet), iron oxide yellow (for 100 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, talc (for 500 mg tablet) and titanium dioxide."
},
{
"NDCCode": "46708-312-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-312-30) ",
"NDC11Code": "46708-0312-30",
"ProductNDC": "46708-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosutinib",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209543",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BOSUTINIB",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Bosutinib tablets are indicated for the treatment of. Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)]. Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water. Bosutinib tablets are supplied for oral administration in two strengths: 100 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, hypromellose, iron oxide red (for 500 mg tablet), iron oxide yellow (for 100 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, talc (for 500 mg tablet) and titanium dioxide."
},
{
"NDCCode": "48878-0231-7",
"PackageDescription": "12 BOTTLE in 1 CASE (48878-0231-7) / 500 mL in 1 BOTTLE",
"NDC11Code": "48878-0231-07",
"ProductNDC": "48878-0231",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Avagard D",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19991001",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Solventum US LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "530.7",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110428",
"SamplePackage": "N",
"IndicationAndUsage": "instant healthcare personnel hand antiseptic : 1 reduces bacteria that potentially can cause disease , 2 recommended for repeated use ."
},
{
"NDCCode": "50458-254-14",
"PackageDescription": "5 AMPULE in 1 BOX (50458-254-14) / 1 mL in 1 AMPULE",
"NDC11Code": "50458-0254-14",
"ProductNDC": "50458-254",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haldol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "19860114",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018701",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19860114",
"EndMarketingDatePackage": "20270831",
"SamplePackage": "N",
"IndicationAndUsage": "HALDOL DECANOATE is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "HALDOL DECANOATE (haloperidol decanoate injection) is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C 31H 41CIFNO 3and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of HALDOL DECANOATE contains: 1 50 mg of haloperidol (present as 70.5 mg of haloperidol decanoate) in a sesame oil vehicle (0.85 g/mL), with 15 mg/mL benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141 mg of haloperidol decanoate) in a sesame oil vehicle (0.85 g/mL), with 15 mg/mL benzyl alcohol as a preservative."
},
{
"NDCCode": "50594-530-16",
"PackageDescription": "177 g in 1 BOTTLE, PUMP (50594-530-16)",
"NDC11Code": "50594-0530-16",
"ProductNDC": "50594-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sound Body",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160501",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333D",
"LabelerName": "Big Lots Stores, Inc.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-14",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "53329-156-14",
"PackageDescription": "57 g in 1 TUBE (53329-156-14) ",
"NDC11Code": "53329-0156-14",
"ProductNDC": "53329-156",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medline",
"NonProprietaryName": "Menthol, White Petrolatum, Zinc Oxide",
"DosageFormName": "PASTE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230401",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M015",
"LabelerName": "Medline Industries, LP",
"SubstanceName": "ZINC OXIDE; MENTHOL; PETROLATUM",
"StrengthNumber": "206; 4.4; 530",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 for the temporary relief of anorectal itching and discomfort in the perianal area associated with anorectal inflammation, 2 temporarily forms a protective coating over inflamed tissues to help prevent drying of tissues, 3 temporarily protects irritated areas, 4 temporarily relieves burning, 5 provides temporary relief from skin irritations, 6 temporarily protects the inflamed irritated anorectal surface to help make bowel movements less painful, 7 temporarily protects inflamed perianal skin, 8 temporarily relieves the symptoms of perianal skin irritation, 9 may provide a cooling sensation."
},
{
"NDCCode": "55118-530-10",
"PackageDescription": "1000 mL in 1 BAG (55118-530-10) ",
"NDC11Code": "55118-0530-10",
"ProductNDC": "55118-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Ultra Moisturizing Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120301",
"SamplePackage": "N",
"IndicationAndUsage": "For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs."
},
{
"NDCCode": "55118-530-11",
"PackageDescription": "44 mL in 1 BOTTLE, PLASTIC (55118-530-11) ",
"NDC11Code": "55118-0530-11",
"ProductNDC": "55118-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Ultra Moisturizing Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120301",
"SamplePackage": "N",
"IndicationAndUsage": "For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs."
},
{
"NDCCode": "55118-530-12",
"PackageDescription": "1200 mL in 1 BAG (55118-530-12) ",
"NDC11Code": "55118-0530-12",
"ProductNDC": "55118-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Ultra Moisturizing Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120301",
"SamplePackage": "N",
"IndicationAndUsage": "For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs."
},
{
"NDCCode": "55118-530-63",
"PackageDescription": "6 BOTTLE in 1 CARTON (55118-530-63) / 1000 mL in 1 BOTTLE (55118-530-91) ",
"NDC11Code": "55118-0530-63",
"ProductNDC": "55118-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Ultra Moisturizing Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150301",
"SamplePackage": "N",
"IndicationAndUsage": "To decrease bacteria on the skin that could potentially cause disease."
},
{
"NDCCode": "55118-530-65",
"PackageDescription": "2 BOTTLE in 1 CARTON (55118-530-65) / 1200 mL in 1 BOTTLE (55118-530-92) ",
"NDC11Code": "55118-0530-65",
"ProductNDC": "55118-530",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Ultra Moisturizing Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150301",
"SamplePackage": "N",
"IndicationAndUsage": "To decrease bacteria on the skin that could potentially cause disease."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>45865-530-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (45865-530-14) </PackageDescription>
<NDC11Code>45865-0530-14</NDC11Code>
<ProductNDC>45865-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076639</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ciprofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) o Acute Exacerbation of Chronic Bronchitis , 11 Urinary Tract Infections ( 1.11) o Urinary Tract Infections (UTI) o Acute Uncomplicated Cystitis o Complicated UTI and Pyelonephritis in Pediatric Patients , 12 Acute Sinusitis ( 1.12) .</IndicationAndUsage>
<Description>Ciprofloxacin (ciprofloxacin hydrochloride) tablets USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3 HCl H 2O and its chemical structure is as follows:. Ciprofloxacin film-coated tablets USP are available in 250 mg, 500 mg and 750 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin tablets USP are white film coated tablets. The inactive ingredients are pregelatinized starch, microcrystalline cellulose, colloidal silicon dioxide, crospovidone, magnesium stearate, hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>12634-530-54</NDCCode>
<PackageDescription>14 TABLET in 1 BLISTER PACK (12634-530-54)</PackageDescription>
<NDC11Code>12634-0530-54</NDC11Code>
<ProductNDC>12634-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19590806</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011722</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Diethylpropion hydrochloride is indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches x 0.0254 = meters. The usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride is indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion hydrochloride is available for oral administration in immediate-release tablets containing 25 mg diethylpropion hydrochloride and in controlled-release tablets containing 75 mg diethylpropion hydrochloride. The inactive ingredients in each immediate-release tablet are: cornstarch, lactose, magnesium stearate, pregelatinized cornstarch, talc, and tartaric acid. The inactive ingredients in each controlled-release tablet are: carbomer 934P, mannitol, povidone, tartaric acid, zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethylamino-1-propanone hydrochloride. Its chemical structure is. The diethylpropion hydrochloride 75 mg formulation is dispersed in a hydrophilic matrix. On exposure to water, the diethylpropion hydrochloride is released at a relatively uniform rate as a result of slow hydration of the matrix. The result is controlled release of the anorectic agent.</Description>
</NDC>
<NDC>
<NDCCode>12634-530-84</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (12634-530-84)</PackageDescription>
<NDC11Code>12634-0530-84</NDC11Code>
<ProductNDC>12634-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19590806</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011722</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Diethylpropion hydrochloride is indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches x 0.0254 = meters. The usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride is indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion hydrochloride is available for oral administration in immediate-release tablets containing 25 mg diethylpropion hydrochloride and in controlled-release tablets containing 75 mg diethylpropion hydrochloride. The inactive ingredients in each immediate-release tablet are: cornstarch, lactose, magnesium stearate, pregelatinized cornstarch, talc, and tartaric acid. The inactive ingredients in each controlled-release tablet are: carbomer 934P, mannitol, povidone, tartaric acid, zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethylamino-1-propanone hydrochloride. Its chemical structure is. The diethylpropion hydrochloride 75 mg formulation is dispersed in a hydrophilic matrix. On exposure to water, the diethylpropion hydrochloride is released at a relatively uniform rate as a result of slow hydration of the matrix. The result is controlled release of the anorectic agent.</Description>
</NDC>
<NDC>
<NDCCode>43063-530-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE, PLASTIC (43063-530-14) </PackageDescription>
<NDC11Code>43063-0530-14</NDC11Code>
<ProductNDC>43063-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065136</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clarithromycin is a macrolide antimicrobial indicated for mild to moderate infections caused by designated, susceptible bacteria in the following: 1 Acute Bacterial Exacerbation of Chronic Bronchitis in Adults ( 1.1) , 2 Acute Maxillary Sinusitis ( 1.2) , 3 Community-Acquired Pneumonia ( 1.3) , 4 Pharyngitis/Tonsillitis ( 1.4) , 5 Uncomplicated Skin and Skin Structure Infections ( 1.5) , 6 Acute Otitis Media in Pediatric Patients ( 1.6) , 7 Treatment and Prophylaxis of Disseminated Mycobacterial Infections ( 1.7) , 8 Helicobacter pyloriInfection and Duodenal Ulcer Disease in Adults ( 1.8) .</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0‑ methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin tablets, USP are intended for oral administration and contain 250 mg or 500 mg of clarithromycin, USP. In addition, each clarithromycin tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68382-530-14</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (68382-530-14) </PackageDescription>
<NDC11Code>68382-0530-14</NDC11Code>
<ProductNDC>68382-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diflunisal</ProprietaryName>
<NonProprietaryName>Diflunisal</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203547</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>DIFLUNISAL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diflunisal tablets and other treatment options before deciding to use diflunisal tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Diflunisal tablets are indicated for acute or long-term use for symptomatic treatment of the following. 1. Mild to moderate pain. 2. Osteoarthritis. 3. Rheumatoid arthritis.</IndicationAndUsage>
<Description>Diflunisal is 2',4'-difluoro-4-hydroxy-3-biphenylcarboxylic acid. Its structural formula is. C13H8F2O3 M.W. 250.20. Diflunisal is a stable, white to off-white, crystalline compound with a melting point of 211° to 213°C. It is practically insoluble in hexane and water. It is soluble in most organic solvents including acetone and ethyl acetate and it is slightly soluble in chloroform, carbon tetrachloride and methylene chloride. Each diflunisal tablet intended for oral administration contains 500 mg of diflunisal. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, microcrystalline cellulose, pregelatinised starch and sodium stearyl fumarate. Additionally, each diflunisal tablets contain opadry blue 03B505010 which contains FD&C blue #2, FD&C yellow #6, hypromellose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-530-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70934-530-14) </PackageDescription>
<NDC11Code>70934-0530-14</NDC11Code>
<ProductNDC>70934-530</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202710</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>82199-530-11</NDCCode>
<PackageDescription>14.2 g in 1 TUBE (82199-530-11) </PackageDescription>
<NDC11Code>82199-0530-11</NDC11Code>
<ProductNDC>82199-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple Antibiotic</ProprietaryName>
<NonProprietaryName>Polymyxin B Sulfate,neomycin Sulfate,bacitracin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210826</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Shandong Ruian Pharmaceutical Co.,Ltd.</LabelerName>
<SubstanceName>BACITRACIN; LIDOCAINE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500; 40; 3500; 5000</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g; [USP'U]/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Antiarrhythmic [EPC], Decreased Cell Wall Synthesis & Repair [PE], Local Anesthesia [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent infection and for temporary relief of pain or discomfort in minor: cuts scrapes burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>45865-116-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (45865-116-14) </PackageDescription>
<NDC11Code>45865-0116-14</NDC11Code>
<ProductNDC>45865-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062500</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Tablets and Capsules and Doxycycline for Oral Suspension; for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the capsule formulations are: colloidal silicon dioxide, lactose anhydrous, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and stearic acid. 50 mg gelatin capsule shell contains: FD&C Blue #1, D&C Yellow #10, titanium dioxide and gelatin. 100 mg gelatin capsule shell contains: FD&C Blue #1, titanium dioxide and gelatin. Black ink contains shellac glaze in SD-45, black iron oxide, propylene glycol, FD&C Blue #2, FD&C Red # 40, FD&C Blue # 1, D&C Yellow # 10, butyl alcohol, denatured alcohol. Each capsule, for oral administration, contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline. Inactive ingredients for the oral suspension formulation are: confectioner's sugar, D&C red #27 aluminum lake, ethyl acetate, maltodextrin, methylparaben, microcrystalline cellulose/ sodium carboxymethylcellulose, modified cornstarch, natural flavoring; propylparaben, simethicone and sucrose. When reconstituted, each teaspoonful (5 mL) doxycycline suspension, for oral administration, contains doxycycline monohydrate equivalent to 25 mg of doxycycline. Inactive ingredients for the tablet formulation are: anhydrous lactose, colloidal silicon dioxide, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, stearic acid, and titanium dioxide. Each tablet, for oral administration, contains doxycycline hyclate equivalent to 100 mg doxycycline.</Description>
</NDC>
<NDC>
<NDCCode>45865-203-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (45865-203-14) </PackageDescription>
<NDC11Code>45865-0203-14</NDC11Code>
<ProductNDC>45865-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209402</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae. , 3 Lymphogranuloma venereum caused by Chlamydia trachomatis. , 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci. , 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis. , 7 Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. , 8 Nongonococcal urethritis caused by Ureaplasma urealyticum. , 9 Relapsing fever due to Borrelia recurrentis. .</IndicationAndUsage>
<Description>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. DESCRIPTION. Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as capsules of doxycycline hyclate for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a- octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2- naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients in the capsule formulations are: FD&C Blue 1, gelatin, magnesium stearate, iron oxide, microcrystalline cellulose, potassium hydroxide, shellac, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>45865-240-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (45865-240-14) </PackageDescription>
<NDC11Code>45865-0240-14</NDC11Code>
<ProductNDC>45865-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150923</StartMarketingDate>
<EndMarketingDate>20260601</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207446</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230220</StartMarketingDatePackage>
<EndMarketingDatePackage>20260601</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>45865-244-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (45865-244-14) </PackageDescription>
<NDC11Code>45865-0244-14</NDC11Code>
<ProductNDC>45865-244</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078643</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217ºC, and a pK aof 8.47 at 25ºC. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-( 5H-dibenzo[ a, d] cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride is supplied as 5 mg or 10 mg tablets for oral administration. Each tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch (maize) and titanium dioxide. In addition 5 mg also contains D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake and 10 mg also contains yellow iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>45865-444-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE, PLASTIC (45865-444-14) </PackageDescription>
<NDC11Code>45865-0444-14</NDC11Code>
<ProductNDC>45865-444</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19860710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062676</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) capsules and tablets for oral administration. The chemical designation of this light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Doxycycline hyclate has the following structural formula. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg doxycycline (anhydrous). Inactive ingredients for capsules are: anhydrous lactose, croscarmellose sodium, D&C Red #28, FD&C Blue #1, gelatin, magnesium stearate, microcrystalline cellulose, and titanium dioxide. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg doxycycline. Inactive ingredients for tablets are: anhydrous lactose, carnauba wax, croscarmellose sodium, D&C Yellow #10 aluminum lake, FD&C Red #40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>45865-758-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (45865-758-14) </PackageDescription>
<NDC11Code>45865-0758-14</NDC11Code>
<ProductNDC>45865-758</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076361</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin tablets and other antibacterial drugs, levofloxacin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Levofloxacin tablets are indicated for the treatment of adults (≥ 18 years of age) with mild, moderate, and severe infections caused by susceptible isolates of the designated microorganisms in the conditions listed in this section. Culture and Susceptibility Testing. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify organisms causing the infection and to determine their susceptibility to levofloxacin [ see Microbiology ( 12.4) ]. Therapy with levofloxacin tablets may be initiated before results of these tests are known; once results become available, appropriate therapy should be selected. As with other drugs in this class, some isolates of Pseudomonas aeruginosa may develop resistance fairly rapidly during treatment with levofloxacin tablets. Culture and susceptibility testing performed periodically during therapy will provide information about the continued susceptibility of the pathogens to the antimicrobial agent and also the possible emergence of bacterial resistance.</IndicationAndUsage>
<Description>Levofloxacin tablets are a synthetic broad-spectrum antibacterial agent for oral administration. Chemically, levofloxacin, USP, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-( S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7 H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin, USP. C 18H 20FN 3O 4½ H 2O M.W. 370.38. Levofloxacin, USP is a light yellowish-white to yellow-white crystal or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin, USP is considered soluble to freely soluble in this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely soluble in this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin, USP has the potential to form stable coordination compounds with many metal ions. This in vitro chelation potential has the following formation order: Al +3 > Cu +2 > Zn +2 > Mg +2 > Ca +2. Excipients and Description of Dosage Form. Levofloxacin tablets are available as film-coated tablets and contain the following inactive ingredients: 1 250 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide red, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 2 500 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide., 3 750 mg (as expressed in the anhydrous form): colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0135-01</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (0069-0135-01) </PackageDescription>
<NDC11Code>00069-0135-01</NDC11Code>
<ProductNDC>0069-0135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0136-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0136-01) </PackageDescription>
<NDC11Code>00069-0136-01</NDC11Code>
<ProductNDC>0069-0136</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0193-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) </PackageDescription>
<NDC11Code>00069-0193-01</NDC11Code>
<ProductNDC>0069-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171218</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-0504-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (0069-0504-30) </PackageDescription>
<NDC11Code>00069-0504-30</NDC11Code>
<ProductNDC>0069-0504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217729</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0069-1014-15</NDCCode>
<PackageDescription>150 CAPSULE in 1 BOTTLE (0069-1014-15) </PackageDescription>
<NDC11Code>00069-1014-15</NDC11Code>
<ProductNDC>0069-1014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217729</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>10893-531-02</NDCCode>
<PackageDescription>1 KIT in 1 KIT (10893-531-02) * 118.3 mL in 1 BOTTLE (10893-530-04) * 113.3 g in 1 CARTON (10893-660-04) </PackageDescription>
<NDC11Code>10893-0531-02</NDC11Code>
<ProductNDC>10893-531</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naturasil Mite B Gone Treatment Kit</ProprietaryName>
<NonProprietaryName>Sulfur, Thuja Occidentalis</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240212</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nature's Innovation, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>46708-311-35</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (46708-311-35) </PackageDescription>
<NDC11Code>46708-0311-35</NDC11Code>
<ProductNDC>46708-311</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosutinib</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209543</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BOSUTINIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bosutinib tablets are indicated for the treatment of. Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)]. Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water. Bosutinib tablets are supplied for oral administration in two strengths: 100 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, hypromellose, iron oxide red (for 500 mg tablet), iron oxide yellow (for 100 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, talc (for 500 mg tablet) and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-312-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-312-30) </PackageDescription>
<NDC11Code>46708-0312-30</NDC11Code>
<ProductNDC>46708-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosutinib</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209543</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BOSUTINIB</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bosutinib tablets are indicated for the treatment of. Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)]. Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water. Bosutinib tablets are supplied for oral administration in two strengths: 100 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, hypromellose, iron oxide red (for 500 mg tablet), iron oxide yellow (for 100 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, talc (for 500 mg tablet) and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>48878-0231-7</NDCCode>
<PackageDescription>12 BOTTLE in 1 CASE (48878-0231-7) / 500 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>48878-0231-07</NDC11Code>
<ProductNDC>48878-0231</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Avagard D</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19991001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Solventum US LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>530.7</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>instant healthcare personnel hand antiseptic : 1 reduces bacteria that potentially can cause disease , 2 recommended for repeated use .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50458-254-14</NDCCode>
<PackageDescription>5 AMPULE in 1 BOX (50458-254-14) / 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>50458-0254-14</NDC11Code>
<ProductNDC>50458-254</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haldol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>19860114</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018701</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19860114</StartMarketingDatePackage>
<EndMarketingDatePackage>20270831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HALDOL DECANOATE is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>HALDOL DECANOATE (haloperidol decanoate injection) is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C 31H 41CIFNO 3and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of HALDOL DECANOATE contains: 1 50 mg of haloperidol (present as 70.5 mg of haloperidol decanoate) in a sesame oil vehicle (0.85 g/mL), with 15 mg/mL benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141 mg of haloperidol decanoate) in a sesame oil vehicle (0.85 g/mL), with 15 mg/mL benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>50594-530-16</NDCCode>
<PackageDescription>177 g in 1 BOTTLE, PUMP (50594-530-16)</PackageDescription>
<NDC11Code>50594-0530-16</NDC11Code>
<ProductNDC>50594-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sound Body</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333D</ApplicationNumber>
<LabelerName>Big Lots Stores, Inc.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-14</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>53329-156-14</NDCCode>
<PackageDescription>57 g in 1 TUBE (53329-156-14) </PackageDescription>
<NDC11Code>53329-0156-14</NDC11Code>
<ProductNDC>53329-156</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medline</ProprietaryName>
<NonProprietaryName>Menthol, White Petrolatum, Zinc Oxide</NonProprietaryName>
<DosageFormName>PASTE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M015</ApplicationNumber>
<LabelerName>Medline Industries, LP</LabelerName>
<SubstanceName>ZINC OXIDE; MENTHOL; PETROLATUM</SubstanceName>
<StrengthNumber>206; 4.4; 530</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 for the temporary relief of anorectal itching and discomfort in the perianal area associated with anorectal inflammation, 2 temporarily forms a protective coating over inflamed tissues to help prevent drying of tissues, 3 temporarily protects irritated areas, 4 temporarily relieves burning, 5 provides temporary relief from skin irritations, 6 temporarily protects the inflamed irritated anorectal surface to help make bowel movements less painful, 7 temporarily protects inflamed perianal skin, 8 temporarily relieves the symptoms of perianal skin irritation, 9 may provide a cooling sensation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55118-530-10</NDCCode>
<PackageDescription>1000 mL in 1 BAG (55118-530-10) </PackageDescription>
<NDC11Code>55118-0530-10</NDC11Code>
<ProductNDC>55118-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Ultra Moisturizing Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55118-530-11</NDCCode>
<PackageDescription>44 mL in 1 BOTTLE, PLASTIC (55118-530-11) </PackageDescription>
<NDC11Code>55118-0530-11</NDC11Code>
<ProductNDC>55118-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Ultra Moisturizing Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55118-530-12</NDCCode>
<PackageDescription>1200 mL in 1 BAG (55118-530-12) </PackageDescription>
<NDC11Code>55118-0530-12</NDC11Code>
<ProductNDC>55118-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Ultra Moisturizing Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For personal hand hygiene to help prevent the spread of bacteria. Kills harmful bacteria or germs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55118-530-63</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (55118-530-63) / 1000 mL in 1 BOTTLE (55118-530-91) </PackageDescription>
<NDC11Code>55118-0530-63</NDC11Code>
<ProductNDC>55118-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Ultra Moisturizing Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To decrease bacteria on the skin that could potentially cause disease.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55118-530-65</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (55118-530-65) / 1200 mL in 1 BOTTLE (55118-530-92) </PackageDescription>
<NDC11Code>55118-0530-65</NDC11Code>
<ProductNDC>55118-530</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Ultra Moisturizing Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To decrease bacteria on the skin that could potentially cause disease.</IndicationAndUsage>
</NDC>
</NDCList>