{
"NDC": [
{
"NDCCode": "46708-348-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-348-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0348-10",
"ProductNDC": "46708-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210301",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250521",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "46708-348-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-348-30) ",
"NDC11Code": "46708-0348-30",
"ProductNDC": "46708-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210301",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250514",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "46708-348-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-348-90) ",
"NDC11Code": "46708-0348-90",
"ProductNDC": "46708-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210301",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250514",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "46708-348-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-348-91) ",
"NDC11Code": "46708-0348-91",
"ProductNDC": "46708-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210301",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250514",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16729-348-10",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16729-348-10) ",
"NDC11Code": "16729-0348-10",
"ProductNDC": "16729-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208049",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230220",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . , 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . , 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . .",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, pregelatinized starch, croscarmellose sodium, hydroxypropyl methyl cellulose, magnesium stearate. Additionally, the 20 mg, 40 mg, 60 mg & 120 mg tablet contains hydroxylpropyl methyl cellulose 2910, talc, polyethylene glycol 6000 & titanium dioxide and 80 mg tablet contains hydroxylpropyl methyl cellulose 2910, titanium dioxide, talc, polyethylene glycol 6000, iron oxide yellow and FD&C Blue #2/indigo carmine aluminium lake."
},
{
"NDCCode": "24839-348-10",
"PackageDescription": "10 mL in 1 BOTTLE (24839-348-10)",
"NDC11Code": "24839-0348-10",
"ProductNDC": "24839-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Notuss-nxd",
"NonProprietaryName": "Codeine Phosphate, Pseudoephedrine Hcl, Chlorcyclizine Hcl",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20101103",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "SJ PHARMACEUTICALS, LLC",
"SubstanceName": "CODEINE PHOSPHATE; PSEUDOEPHEDRINE HYDROCHLORIDE; CHLORCYCLIZINE HYDROCHLORIDE",
"StrengthNumber": "10; 30; 9.375",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA],alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-10-03"
},
{
"NDCCode": "31722-348-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (31722-348-10)",
"NDC11Code": "31722-0348-10",
"ProductNDC": "31722-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nadolol",
"NonProprietaryName": "Nadolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203455",
"LabelerName": "Camber, Pharmaceuticals Inc",
"SubstanceName": "NADOLOL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Nadolol tablets, USP are indicated for the long-term management of patients with angina pectoris.",
"Description": "Nadolol is a synthetic nonselective beta-adrenergic receptor blocking agent designated chemically as 1-(tert-butylamino)-3-[(5, 6, 7, 8-tetrahydro-cis-6, 7-dihydroxy-1-naphthyl)oxy]-2-propanol. Structural formula. C17H27NO4 M.W. 309.40. Nadolol, USP is a white crystalline powder. It is freely soluble in ethanol, soluble in hydrochloric acid, slightly soluble in water and in chloroform, and very slightly soluble in sodium hydroxide. Nadolol tablets, USP are available for oral administration as 20 mg, 40 mg, and 80 mg tablets. Inactive ingredients: lactose monohydrate, microcrystalline cellulose, povidone, D&C yellow No. 10, croscarmellose sodium, and magnesium stearate."
},
{
"NDCCode": "33342-348-10",
"PackageDescription": "90 TABLET in 1 CONTAINER (33342-348-10) ",
"NDC11Code": "33342-0348-10",
"ProductNDC": "33342-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210379",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260121",
"SamplePackage": "N",
"IndicationAndUsage": "Fenofibrate tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist indicated as an adjunct to diet: To reduce elevated LDL-C, Total-C, TG and Apo B, and to increase HDL-C in adult patients with primary hypercholesterolemia or mixed dyslipidemia (1.1). For treatment of adult patients with severe hypertriglyceridemia (1.2). Limitations of Use: Fenofibrate was not shown to reduce coronary heart disease morbidity and mortality in patients with type 2 diabetes mellitus (5.1).",
"Description": "Fenofibrate tablets USP, is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate . The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The molecular formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79-82°C. Fenofibrate is a white solid which is stable under ordinary conditions.Inactive Ingredients Each tablet contains Croscarmellose sodium, Crospovidone, Docusate sodium, Lecithin, Mannitol, Microcrystalline cellulose, Polyvinyl alcohol-part hydrolyzed, Povidone,Sodium lauryl Sulphate, Sodium stearyl fumarate, Talc, Titanium dioxide, Xanthan gum. In addition, 54 mg individual tablets contain: Iron oxide yellow FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "33342-348-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-348-12) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "33342-0348-12",
"ProductNDC": "33342-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210379",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260121",
"SamplePackage": "N",
"IndicationAndUsage": "Fenofibrate tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist indicated as an adjunct to diet: To reduce elevated LDL-C, Total-C, TG and Apo B, and to increase HDL-C in adult patients with primary hypercholesterolemia or mixed dyslipidemia (1.1). For treatment of adult patients with severe hypertriglyceridemia (1.2). Limitations of Use: Fenofibrate was not shown to reduce coronary heart disease morbidity and mortality in patients with type 2 diabetes mellitus (5.1).",
"Description": "Fenofibrate tablets USP, is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate . The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The molecular formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79-82°C. Fenofibrate is a white solid which is stable under ordinary conditions.Inactive Ingredients Each tablet contains Croscarmellose sodium, Crospovidone, Docusate sodium, Lecithin, Mannitol, Microcrystalline cellulose, Polyvinyl alcohol-part hydrolyzed, Povidone,Sodium lauryl Sulphate, Sodium stearyl fumarate, Talc, Titanium dioxide, Xanthan gum. In addition, 54 mg individual tablets contain: Iron oxide yellow FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "37205-348-52",
"PackageDescription": "10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (37205-348-52)",
"NDC11Code": "37205-0348-52",
"ProductNDC": "37205-348",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Allergy Relief D-24",
"NonProprietaryName": "Loratadine And Pseudoephedrine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20041117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076557",
"LabelerName": "Cardinal Health",
"SubstanceName": "LORATADINE; PSEUDOEPHEDRINE SULFATE",
"StrengthNumber": "10; 240",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:sneezingitchy, watery eyesrunny noseitching of the nose or throat. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "37803-348-10",
"PackageDescription": "100 g in 1 BOTTLE (37803-348-10)",
"NDC11Code": "37803-0348-10",
"ProductNDC": "37803-348",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cisapride Monohydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150708",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Apotheca Supply Inc.",
"SubstanceName": "CISAPRIDE MONOHYDRATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "43598-348-37",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (43598-348-37) > 10 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "43598-0348-37",
"ProductNDC": "43598-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Decitabine",
"NonProprietaryName": "Decitabine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203131",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "DECITABINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130711",
"SamplePackage": "N",
"IndicationAndUsage": "Decitabine for injection is indicated for treatment of adult patients with myelodysplastic syndromes (MDS) including previously treated and untreated, de novo and secondary MDS of all French-American-British subtypes (refractory anemia, refractory anemia with ringed sideroblasts, refractory anemia with excess blasts, refractory anemia with excess blasts in transformation, and chronic myelomonocytic leukemia) and intermediate-1, intermediate-2, and high-risk International Prognostic Scoring System groups.",
"Description": "Decitabine is a nucleoside metabolic inhibitor. Decitabine is a white to off white coloured powder with the molecular formula of C8H12N4O4 and a molecular weight of 228.21. Its chemical name is 4-amino-1-(2-deoxy-β-D-erythro-pentofuranosyl)-1,3,5-triazin-2(1H)-one and it has the following structural formula. Decitabine is soluble in dimethyl sulphoxide and sparingly soluble in water. Decitabine for injection for intravenous use, is a sterile, white to almost white lyophilized powder supplied in a clear colorless glass single-dose vial. Each 20 mL vial contains 50 mg decitabine, 68 mg monobasic potassium phosphate (potassium dihydrogen phosphate) and 11.6 mg sodium hydroxide. Sodium hydroxide is used for pH adjustment."
},
{
"NDCCode": "49643-348-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-348-10) ",
"NDC11Code": "49643-0348-10",
"ProductNDC": "49643-348",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Winterfat Pollen",
"NonProprietaryName": "Eurotia Lanata",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "KRASCHENINNIKOVIA LANATA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "50419-348-05",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-348-05) / 50 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0348-05",
"ProductNDC": "50419-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-348-10",
"PackageDescription": "100 mL in 1 VIAL, GLASS (50419-348-10) ",
"NDC11Code": "50419-0348-10",
"ProductNDC": "50419-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-348-12",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-348-12) / 100 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0348-12",
"ProductNDC": "50419-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-348-13",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-348-13) / 100 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0348-13",
"ProductNDC": "50419-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-348-21",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-348-21) / 200 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0348-21",
"ProductNDC": "50419-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "51060-348-01",
"PackageDescription": "1 JAR in 1 CARTON (51060-348-01) / 10 mL in 1 JAR",
"NDC11Code": "51060-0348-01",
"ProductNDC": "51060-348",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hello, Sunshine Moisturizer Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Homosalate, Oxybenzone, Octisalate, Avobenzone And Octocrylene",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170706",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Tarte, Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 100; 50; 10; 50",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170706",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N"
},
{
"NDCCode": "51224-011-10",
"PackageDescription": "348.6 g in 1 CAN (51224-011-10) ",
"NDC11Code": "51224-0011-10",
"ProductNDC": "51224-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20210310",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209597",
"LabelerName": "TAGI Pharma, Inc.",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/8.3g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210310",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for Oral Suspension, USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation: LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin, may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available, then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for Oral Suspension, USP is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for Oral Suspension, USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. 8.3 grams of Cholestyramine for Oral Suspension, USP contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Inactive ingredients: sucrose (429.5 mg/g), propylene glycol alginate, natural orange flavor, anhydrous citric acid, D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6 aluminum lake."
},
{
"NDCCode": "52959-348-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (52959-348-10)",
"NDC11Code": "52959-0348-10",
"ProductNDC": "52959-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19771121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085966",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "54575-348-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-348-10)",
"NDC11Code": "54575-0348-10",
"ProductNDC": "54575-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Soybean",
"NonProprietaryName": "Soybean",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "SOYBEAN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55150-348-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (55150-348-10) / 10 mL in 1 VIAL, MULTI-DOSE (55150-348-01) ",
"NDC11Code": "55150-0348-10",
"ProductNDC": "55150-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213244",
"LabelerName": "Eugia US LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231102",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine methylsulfate injection is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.",
"Description": "Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethyl ammonium methylsulfate dimethylcarbamate. The structural formula is: Neostigmine methylsulfate, USP is a white or almost white, crystalline powder (or) colorless crystals and is very soluble in water and soluble in alcohol. Neostigmine methylsulfate injection, USP is a sterile, nonpyrogenic clear colorless solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol (as liquefied phenol) 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with glacial acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol (as liquefied phenol) 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with glacial acetic acid/sodium hydroxide to achieve a value of 5.5."
},
{
"NDCCode": "59262-348-11",
"PackageDescription": "10 mL in 1 BOTTLE, DROPPER (59262-348-11)",
"NDC11Code": "59262-0348-11",
"ProductNDC": "59262-348",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Irritated Eye Relief",
"NonProprietaryName": "Atropa Belladonna, Calcium Sulfide And Euphrasia Stricta",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20130702",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Similasan Corporation",
"SubstanceName": "ATROPA BELLADONNA; EUPHRASIA STRICTA; CALCIUM SULFIDE",
"StrengthNumber": "6; 6; 12",
"StrengthUnit": "[hp_X]/10mL; [hp_X]/10mL; [hp_X]/10mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "According to homeopathic principles, the active ingredients in this medication help to temporarily relieve symptoms of: 1 redness of the eyes , 2 excessive watery (clear) discharge , 3 sensation of grittiness , 4 irritation, dryness, and burning."
},
{
"NDCCode": "59746-348-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (59746-348-03) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "59746-0348-03",
"ProductNDC": "59746-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203150",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20131127",
"SamplePackage": "N"
},
{
"NDCCode": "59746-348-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (59746-348-10) ",
"NDC11Code": "59746-0348-10",
"ProductNDC": "59746-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203150",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20131127",
"SamplePackage": "N"
},
{
"NDCCode": "62332-348-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (62332-348-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "62332-0348-10",
"ProductNDC": "62332-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210301",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250514",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "62756-348-44",
"PackageDescription": "10 AMPULE in 1 PACKAGE (62756-348-44) > 1 mL in 1 AMPULE",
"NDC11Code": "62756-0348-44",
"ProductNDC": "62756-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Octreotide Acetate",
"NonProprietaryName": "Octreotide Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20070814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077372",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "OCTREOTIDE ACETATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-17"
},
{
"NDCCode": "62778-348-40",
"PackageDescription": "10 POUCH in 1 CARTON (62778-348-40) / 1 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "62778-0348-40",
"ProductNDC": "62778-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam In Sodium Chloride",
"NonProprietaryName": "Midazolam In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216159",
"LabelerName": "Hikma Farmaceutica",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230519",
"SamplePackage": "N"
},
{
"NDCCode": "63187-348-01",
"PackageDescription": "1 KIT in 1 CARTON (63187-348-01) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1559-10) * .9 mL in 1 PACKET (67777-130-02) * 5 mL in 1 POUCH (53329-820-09) * 2 mL in 1 AMPULE (0409-4713-32) * 1 mL in 1 VIAL (63323-506-01)",
"NDC11Code": "63187-0348-01",
"ProductNDC": "63187-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexlido-m Kit",
"NonProprietaryName": "Dexamethasone Sodium Phosphate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Povidine Iodine",
"DosageFormName": "KIT",
"StartMarketingDate": "20140725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040491",
"LabelerName": "Proficient Rx LP",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-348-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-348-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0348-10</NDC11Code>
<ProductNDC>46708-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210301</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>46708-348-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-348-30) </PackageDescription>
<NDC11Code>46708-0348-30</NDC11Code>
<ProductNDC>46708-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210301</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>46708-348-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-348-90) </PackageDescription>
<NDC11Code>46708-0348-90</NDC11Code>
<ProductNDC>46708-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210301</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>46708-348-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-348-91) </PackageDescription>
<NDC11Code>46708-0348-91</NDC11Code>
<ProductNDC>46708-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210301</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16729-348-10</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-348-10) </PackageDescription>
<NDC11Code>16729-0348-10</NDC11Code>
<ProductNDC>16729-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208049</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . , 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . , 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . .</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, pregelatinized starch, croscarmellose sodium, hydroxypropyl methyl cellulose, magnesium stearate. Additionally, the 20 mg, 40 mg, 60 mg & 120 mg tablet contains hydroxylpropyl methyl cellulose 2910, talc, polyethylene glycol 6000 & titanium dioxide and 80 mg tablet contains hydroxylpropyl methyl cellulose 2910, titanium dioxide, talc, polyethylene glycol 6000, iron oxide yellow and FD&C Blue #2/indigo carmine aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>24839-348-10</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE (24839-348-10)</PackageDescription>
<NDC11Code>24839-0348-10</NDC11Code>
<ProductNDC>24839-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Notuss-nxd</ProprietaryName>
<NonProprietaryName>Codeine Phosphate, Pseudoephedrine Hcl, Chlorcyclizine Hcl</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101103</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>SJ PHARMACEUTICALS, LLC</LabelerName>
<SubstanceName>CODEINE PHOSPHATE; PSEUDOEPHEDRINE HYDROCHLORIDE; CHLORCYCLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 30; 9.375</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA],alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-10-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>31722-348-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (31722-348-10)</PackageDescription>
<NDC11Code>31722-0348-10</NDC11Code>
<ProductNDC>31722-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nadolol</ProprietaryName>
<NonProprietaryName>Nadolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203455</ApplicationNumber>
<LabelerName>Camber, Pharmaceuticals Inc</LabelerName>
<SubstanceName>NADOLOL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Nadolol tablets, USP are indicated for the long-term management of patients with angina pectoris.</IndicationAndUsage>
<Description>Nadolol is a synthetic nonselective beta-adrenergic receptor blocking agent designated chemically as 1-(tert-butylamino)-3-[(5, 6, 7, 8-tetrahydro-cis-6, 7-dihydroxy-1-naphthyl)oxy]-2-propanol. Structural formula. C17H27NO4 M.W. 309.40. Nadolol, USP is a white crystalline powder. It is freely soluble in ethanol, soluble in hydrochloric acid, slightly soluble in water and in chloroform, and very slightly soluble in sodium hydroxide. Nadolol tablets, USP are available for oral administration as 20 mg, 40 mg, and 80 mg tablets. Inactive ingredients: lactose monohydrate, microcrystalline cellulose, povidone, D&C yellow No. 10, croscarmellose sodium, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>33342-348-10</NDCCode>
<PackageDescription>90 TABLET in 1 CONTAINER (33342-348-10) </PackageDescription>
<NDC11Code>33342-0348-10</NDC11Code>
<ProductNDC>33342-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210379</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fenofibrate tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist indicated as an adjunct to diet: To reduce elevated LDL-C, Total-C, TG and Apo B, and to increase HDL-C in adult patients with primary hypercholesterolemia or mixed dyslipidemia (1.1). For treatment of adult patients with severe hypertriglyceridemia (1.2). Limitations of Use: Fenofibrate was not shown to reduce coronary heart disease morbidity and mortality in patients with type 2 diabetes mellitus (5.1).</IndicationAndUsage>
<Description>Fenofibrate tablets USP, is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate . The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The molecular formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79-82°C. Fenofibrate is a white solid which is stable under ordinary conditions.Inactive Ingredients Each tablet contains Croscarmellose sodium, Crospovidone, Docusate sodium, Lecithin, Mannitol, Microcrystalline cellulose, Polyvinyl alcohol-part hydrolyzed, Povidone,Sodium lauryl Sulphate, Sodium stearyl fumarate, Talc, Titanium dioxide, Xanthan gum. In addition, 54 mg individual tablets contain: Iron oxide yellow FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>33342-348-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-348-12) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0348-12</NDC11Code>
<ProductNDC>33342-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210379</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fenofibrate tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist indicated as an adjunct to diet: To reduce elevated LDL-C, Total-C, TG and Apo B, and to increase HDL-C in adult patients with primary hypercholesterolemia or mixed dyslipidemia (1.1). For treatment of adult patients with severe hypertriglyceridemia (1.2). Limitations of Use: Fenofibrate was not shown to reduce coronary heart disease morbidity and mortality in patients with type 2 diabetes mellitus (5.1).</IndicationAndUsage>
<Description>Fenofibrate tablets USP, is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate . The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The molecular formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79-82°C. Fenofibrate is a white solid which is stable under ordinary conditions.Inactive Ingredients Each tablet contains Croscarmellose sodium, Crospovidone, Docusate sodium, Lecithin, Mannitol, Microcrystalline cellulose, Polyvinyl alcohol-part hydrolyzed, Povidone,Sodium lauryl Sulphate, Sodium stearyl fumarate, Talc, Titanium dioxide, Xanthan gum. In addition, 54 mg individual tablets contain: Iron oxide yellow FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>37205-348-52</NDCCode>
<PackageDescription>10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (37205-348-52)</PackageDescription>
<NDC11Code>37205-0348-52</NDC11Code>
<ProductNDC>37205-348</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Allergy Relief D-24</ProprietaryName>
<NonProprietaryName>Loratadine And Pseudoephedrine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076557</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>LORATADINE; PSEUDOEPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>10; 240</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:sneezingitchy, watery eyesrunny noseitching of the nose or throat. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37803-348-10</NDCCode>
<PackageDescription>100 g in 1 BOTTLE (37803-348-10)</PackageDescription>
<NDC11Code>37803-0348-10</NDC11Code>
<ProductNDC>37803-348</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cisapride Monohydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150708</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Apotheca Supply Inc.</LabelerName>
<SubstanceName>CISAPRIDE MONOHYDRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43598-348-37</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (43598-348-37) > 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>43598-0348-37</NDC11Code>
<ProductNDC>43598-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Decitabine</ProprietaryName>
<NonProprietaryName>Decitabine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203131</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>DECITABINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Decitabine for injection is indicated for treatment of adult patients with myelodysplastic syndromes (MDS) including previously treated and untreated, de novo and secondary MDS of all French-American-British subtypes (refractory anemia, refractory anemia with ringed sideroblasts, refractory anemia with excess blasts, refractory anemia with excess blasts in transformation, and chronic myelomonocytic leukemia) and intermediate-1, intermediate-2, and high-risk International Prognostic Scoring System groups.</IndicationAndUsage>
<Description>Decitabine is a nucleoside metabolic inhibitor. Decitabine is a white to off white coloured powder with the molecular formula of C8H12N4O4 and a molecular weight of 228.21. Its chemical name is 4-amino-1-(2-deoxy-β-D-erythro-pentofuranosyl)-1,3,5-triazin-2(1H)-one and it has the following structural formula. Decitabine is soluble in dimethyl sulphoxide and sparingly soluble in water. Decitabine for injection for intravenous use, is a sterile, white to almost white lyophilized powder supplied in a clear colorless glass single-dose vial. Each 20 mL vial contains 50 mg decitabine, 68 mg monobasic potassium phosphate (potassium dihydrogen phosphate) and 11.6 mg sodium hydroxide. Sodium hydroxide is used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>49643-348-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-348-10) </PackageDescription>
<NDC11Code>49643-0348-10</NDC11Code>
<ProductNDC>49643-348</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Winterfat Pollen</ProprietaryName>
<NonProprietaryName>Eurotia Lanata</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>KRASCHENINNIKOVIA LANATA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>50419-348-05</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-348-05) / 50 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0348-05</NDC11Code>
<ProductNDC>50419-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-348-10</NDCCode>
<PackageDescription>100 mL in 1 VIAL, GLASS (50419-348-10) </PackageDescription>
<NDC11Code>50419-0348-10</NDC11Code>
<ProductNDC>50419-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-348-12</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-348-12) / 100 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0348-12</NDC11Code>
<ProductNDC>50419-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-348-13</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-348-13) / 100 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0348-13</NDC11Code>
<ProductNDC>50419-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-348-21</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-348-21) / 200 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0348-21</NDC11Code>
<ProductNDC>50419-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>51060-348-01</NDCCode>
<PackageDescription>1 JAR in 1 CARTON (51060-348-01) / 10 mL in 1 JAR</PackageDescription>
<NDC11Code>51060-0348-01</NDC11Code>
<ProductNDC>51060-348</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hello, Sunshine Moisturizer Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Homosalate, Oxybenzone, Octisalate, Avobenzone And Octocrylene</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170706</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Tarte, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 100; 50; 10; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170706</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51224-011-10</NDCCode>
<PackageDescription>348.6 g in 1 CAN (51224-011-10) </PackageDescription>
<NDC11Code>51224-0011-10</NDC11Code>
<ProductNDC>51224-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210310</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209597</ApplicationNumber>
<LabelerName>TAGI Pharma, Inc.</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/8.3g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210310</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation: LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels > 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin, may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available, then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine resin monotherapy has been demonstrated to retard the rate of progression2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for Oral Suspension, USP is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine resin has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for Oral Suspension, USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. 8.3 grams of Cholestyramine for Oral Suspension, USP contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Inactive ingredients: sucrose (429.5 mg/g), propylene glycol alginate, natural orange flavor, anhydrous citric acid, D&C Yellow No. 10 aluminum lake and FD&C Yellow No. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>52959-348-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (52959-348-10)</PackageDescription>
<NDC11Code>52959-0348-10</NDC11Code>
<ProductNDC>52959-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19771121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085966</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>54575-348-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-348-10)</PackageDescription>
<NDC11Code>54575-0348-10</NDC11Code>
<ProductNDC>54575-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Soybean</ProprietaryName>
<NonProprietaryName>Soybean</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>SOYBEAN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55150-348-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (55150-348-10) / 10 mL in 1 VIAL, MULTI-DOSE (55150-348-01) </PackageDescription>
<NDC11Code>55150-0348-10</NDC11Code>
<ProductNDC>55150-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213244</ApplicationNumber>
<LabelerName>Eugia US LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine methylsulfate injection is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
<Description>Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethyl ammonium methylsulfate dimethylcarbamate. The structural formula is: Neostigmine methylsulfate, USP is a white or almost white, crystalline powder (or) colorless crystals and is very soluble in water and soluble in alcohol. Neostigmine methylsulfate injection, USP is a sterile, nonpyrogenic clear colorless solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol (as liquefied phenol) 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with glacial acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol (as liquefied phenol) 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with glacial acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>59262-348-11</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, DROPPER (59262-348-11)</PackageDescription>
<NDC11Code>59262-0348-11</NDC11Code>
<ProductNDC>59262-348</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Irritated Eye Relief</ProprietaryName>
<NonProprietaryName>Atropa Belladonna, Calcium Sulfide And Euphrasia Stricta</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20130702</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Similasan Corporation</LabelerName>
<SubstanceName>ATROPA BELLADONNA; EUPHRASIA STRICTA; CALCIUM SULFIDE</SubstanceName>
<StrengthNumber>6; 6; 12</StrengthNumber>
<StrengthUnit>[hp_X]/10mL; [hp_X]/10mL; [hp_X]/10mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>According to homeopathic principles, the active ingredients in this medication help to temporarily relieve symptoms of: 1 redness of the eyes , 2 excessive watery (clear) discharge , 3 sensation of grittiness , 4 irritation, dryness, and burning.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59746-348-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (59746-348-03) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59746-0348-03</NDC11Code>
<ProductNDC>59746-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203150</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59746-348-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (59746-348-10) </PackageDescription>
<NDC11Code>59746-0348-10</NDC11Code>
<ProductNDC>59746-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203150</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62332-348-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (62332-348-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>62332-0348-10</NDC11Code>
<ProductNDC>62332-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210301</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablet is a factor Xa inhibitor indicated: to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1) for treatment of deep vein thrombosis (DVT) (1.2) for treatment of pulmonary embolism (PE) (1.3) for reduction in the risk of recurrence of DVT or PE (1.4) for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5) for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6) to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7) to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8) for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9). for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, USP, a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.88. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an white to yellowish powder. Rivaroxaban, USP is soluble in dimethyl sulfoxide, practically insoluble to very slightly soluble in acetone and water. Each rivaroxaban tablet, USP contains 2.5 mg, 10 mg, 15 mg or 20 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for rivaroxaban 2.5 mg tablet is Opadry® Yellow containing D&C yellow #10 aluminium lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol 6000, titanium dioxide, and for rivaroxaban 10 mg tablet is Opadry® Pink containing hypromellose, iron oxide red, polyethylene glycol 6000, talc, titanium dioxide, and for rivaroxaban 15 mg tablet and 20 mg tablet is Opadry® Brown containing hypromellose, iron oxide black, iron oxide red, polyethylene glycol 8000, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>62756-348-44</NDCCode>
<PackageDescription>10 AMPULE in 1 PACKAGE (62756-348-44) > 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>62756-0348-44</NDC11Code>
<ProductNDC>62756-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Octreotide Acetate</ProprietaryName>
<NonProprietaryName>Octreotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20070814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077372</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>62778-348-40</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (62778-348-40) / 1 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>62778-0348-40</NDC11Code>
<ProductNDC>62778-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Midazolam In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216159</ApplicationNumber>
<LabelerName>Hikma Farmaceutica</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63187-348-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63187-348-01) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1559-10) * .9 mL in 1 PACKET (67777-130-02) * 5 mL in 1 POUCH (53329-820-09) * 2 mL in 1 AMPULE (0409-4713-32) * 1 mL in 1 VIAL (63323-506-01)</PackageDescription>
<NDC11Code>63187-0348-01</NDC11Code>
<ProductNDC>63187-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexlido-m Kit</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Povidine Iodine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040491</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>