{
"NDC": [
{
"NDCCode": "46708-453-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-453-90) ",
"NDC11Code": "46708-0453-90",
"ProductNDC": "46708-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "46708-453-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 CARTON (46708-453-10) ",
"NDC11Code": "46708-0453-10",
"ProductNDC": "46708-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "46708-453-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-453-30) ",
"NDC11Code": "46708-0453-30",
"ProductNDC": "46708-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "46708-453-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-453-71) ",
"NDC11Code": "46708-0453-71",
"ProductNDC": "46708-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "12634-453-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (12634-453-90)",
"NDC11Code": "12634-0453-90",
"ProductNDC": "12634-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090278",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Topiramate is indicated for: 1 Monotherapy epilepsy: Initial monotherapy in patients ≥ 2 years of age with partial onset or primary generalized tonic-clonic seizures ( 1.1) , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) ( 1.2) .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.37. Topiramate is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, pregelatinized maize starch, sodium starch glycolate type A potato, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. In addition, individual tablets contain:. 50 mg tablets: iron oxide yellow. 100 mg tablets: iron oxide yellow, and D&C Yellow # 10 Aluminum Lake. 200 mg tablets: iron oxide red, lecithin (soya), and iron oxide black."
},
{
"NDCCode": "16729-453-15",
"PackageDescription": "90 TABLET in 1 BOTTLE (16729-453-15) ",
"NDC11Code": "16729-0453-15",
"ProductNDC": "16729-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212399",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "125",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201203",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium may induce hyperthyroidism [see Warnings and Precautions(5.1)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4N NaO 4 H 2O, molecular weight of 798.86 (anhydrous), and structural formula as shown:. Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Levothyroxine sodium tablets, USP meets USP Dissolution Test 7."
},
{
"NDCCode": "50228-453-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50228-453-90) ",
"NDC11Code": "50228-0453-90",
"ProductNDC": "50228-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205519",
"LabelerName": "ScieGen Pharmaceuticals, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160519",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin Calcium Tablets are indicated: 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD.",
"Description": "Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-(R*,R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium, USP is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: lactose monohydrate, NF; colloidal silicon dioxide, NF; copovidone, NF; croscarmellose sodium, NF; magnesium stearate, NF; mannitol, USP; silicified microcrystalline cellulose, NF; sodium bicarbonate, USP; sodium carbonate anhydrous, NF; sodium lauryl sulfate, NF; hypromellose, polyethylene glycol, talc, titanium dioxide, and iron oxide yellow. This product meets the requirements of USP DissolutionTest-2."
},
{
"NDCCode": "50228-453-91",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50228-453-91) ",
"NDC11Code": "50228-0453-91",
"ProductNDC": "50228-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205519",
"LabelerName": "ScieGen Pharmaceuticals, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160519",
"SamplePackage": "N"
},
{
"NDCCode": "51407-453-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (51407-453-90) ",
"NDC11Code": "51407-0453-90",
"ProductNDC": "51407-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine",
"NonProprietaryName": "Venlafaxine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078627",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210402",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine tablets, USP is indicated for the treatment of major depressive disorder. The efficacy of venlafaxine tablets, USP in the treatment of major depressive disorder was established in 6 week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III or DSM-III-R category of major depression and in a 4 week controlled trial of inpatients meeting diagnostic criteria for major depression with melancholia (see CLINICAL TRIALS). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The efficacy of venlafaxine hydrochloride extended-release capsules in maintaining an antidepressant response for up to 26 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial. The efficacy of venlafaxine tablets, USP in maintaining an antidepressant response in patients with recurrent depression who had responded and continued to be improved during an initial 26 weeks of treatment and were then followed for a period of up to 52 weeks was demonstrated in a second placebo-controlled trial (see CLINICAL TRIALS). Nevertheless, the physician who elects to use venlafaxine tablets, USP/venlafaxine hydrochloride extended-release capsules for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Venlafaxine tablets, USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17H 27NO 2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride, USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg of venlafaxine base and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, sodium starch glycolate, iron oxide red, iron oxide yellow, colloidal silicon dioxide, and magnesium stearate."
},
{
"NDCCode": "55111-453-90",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (55111-453-90) ",
"NDC11Code": "55111-0453-90",
"ProductNDC": "55111-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078421",
"LabelerName": "Dr.Reddy's Laboratories Ltd.",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2018-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110601",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules are serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of:. Major Depressive Disorder (MDD). Generalized Anxiety Disorder (GAD). Social Anxiety Disorder (SAD). Panic Disorder (PD).",
"Description": "Venlafaxine hydrochloride extended-release capsules USP for once-a-day oral administration contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.87. The structural formula is shown as follows. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol. Venlafaxine hydrochloride extended-release capsules USP are formulated as extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the mini-tablets and is not pH dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of basic butylated methacrylate copolymer, ethyl cellulose, gelatin, medium chain triglycerides, microcrystalline cellulose, povidone, red iron oxide, sodium stearyl fumarate, talc and titanium dioxide. In addition to the above 37.5 mg consists of black iron oxide and yellow iron oxide. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are ammonium hydroxide, propylene glycol, simethicone, shellac and titanium dioxide."
},
{
"NDCCode": "55700-453-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (55700-453-90) ",
"NDC11Code": "55700-0453-90",
"ProductNDC": "55700-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090705",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20161111",
"SamplePackage": "N"
},
{
"NDCCode": "62135-453-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (62135-453-90) ",
"NDC11Code": "62135-0453-90",
"ProductNDC": "62135-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acarbose",
"NonProprietaryName": "Acarbose",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202271",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "ACARBOSE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "alpha Glucosidase Inhibitors [MoA], alpha-Glucosidase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230131",
"SamplePackage": "N",
"IndicationAndUsage": "Acarbose tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Acarbose Tablets, USP are an oral alpha-glucosidase inhibitor for use in the management of type 2 diabetes mellitus. Acarbose is an oligosaccharide which is obtained from fermentation processes of a microorganism, Actinoplanes utahensis, and is chemically known as O-4,6-dideoxy- 4-[[(1S,4R,5S,6S)-4,5,6-trihydroxy-3-(hydroxymethyl)-2-cyclohexen-1-yl] amino]- α-D-glucopyranosyl-(1 → 4)-O-α -D-glucopyranosyl-(1 → 4)-D-glucose. It is a white to off-white powder with a molecular weight of 645.6. Acarbose is soluble in water and has a pKa of 5.1. Its empirical formula is C 25H 43NO 18 and its chemical structure is as follows:. Acarbose Tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral use. The inactive ingredients are starch (corn starch), microcrystalline cellulose, magnesium stearate, and colloidal silicon dioxide."
},
{
"NDCCode": "65862-453-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65862-453-90) ",
"NDC11Code": "65862-0453-90",
"ProductNDC": "65862-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090778",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N"
},
{
"NDCCode": "67877-453-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (67877-453-90) ",
"NDC11Code": "67877-0453-90",
"ProductNDC": "67877-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
"NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207037",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "20; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250501",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, asappropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodiumintake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals andmanagement, see published guidelines, such as those of the National High Blood Pressure Education Program's JointNational Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC).Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablets are not indicated for the initial therapy of hypertension.",
"Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCT-Z).Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate.Its empirical formula is C29H30N6O6and its structural formula is. Olmesartan medoxomil is a white to light yellowish-white powder or crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide tablets are available for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropylcellulose, hypromellose, lactose monohydrate, low-substituted hydroxypropylcellulose, magnesium stearate, microcrystalline cellulose, red iron oxide, talc, titanium dioxide and yellow iron oxide, stearic acid, polyethylene glycol."
},
{
"NDCCode": "72189-453-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (72189-453-90) ",
"NDC11Code": "72189-0453-90",
"ProductNDC": "72189-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202112",
"LabelerName": "Direct_Rx",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230324",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see CLINICAL STUDIES (14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride tablets USP is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. [Chemical Structure]. Glimepiride tablets USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, polysorbate 80, sodium starch glycolate, povidone, microcrystalline cellulose, and magnesium stearate. In addition, glimepiride 1 mg tablets contain Ferric Oxide Red and glimepiride 2 mg tablets contain Ferric Oxide Yellow."
},
{
"NDCCode": "77771-453-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (77771-453-90) ",
"NDC11Code": "77771-0453-90",
"ProductNDC": "77771-453",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205519",
"LabelerName": "Radha Pharmaceuticals, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230810",
"SamplePackage": "N"
},
{
"NDCCode": "46708-003-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-003-90) ",
"NDC11Code": "46708-0003-90",
"ProductNDC": "46708-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078894",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": ".125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2017-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "46708-004-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-004-90) ",
"NDC11Code": "46708-0004-90",
"ProductNDC": "46708-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078894",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2017-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "46708-005-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-005-90) ",
"NDC11Code": "46708-0005-90",
"ProductNDC": "46708-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078894",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2017-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "46708-006-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-006-90) ",
"NDC11Code": "46708-0006-90",
"ProductNDC": "46708-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078894",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2017-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "46708-007-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-007-90) ",
"NDC11Code": "46708-0007-90",
"ProductNDC": "46708-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078894",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2017-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160322",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).",
"Description": "Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "46708-044-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-044-90) ",
"NDC11Code": "46708-0044-90",
"ProductNDC": "46708-044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091367",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150106",
"SamplePackage": "N",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
},
{
"NDCCode": "46708-045-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-045-90) ",
"NDC11Code": "46708-0045-90",
"ProductNDC": "46708-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091367",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150106",
"SamplePackage": "N",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
},
{
"NDCCode": "46708-046-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-046-90) ",
"NDC11Code": "46708-0046-90",
"ProductNDC": "46708-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091367",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150106",
"SamplePackage": "N",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
},
{
"NDCCode": "46708-047-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-047-90) ",
"NDC11Code": "46708-0047-90",
"ProductNDC": "46708-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091367",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "320",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150106",
"SamplePackage": "N",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
},
{
"NDCCode": "46708-060-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (46708-060-90) ",
"NDC11Code": "46708-0060-90",
"ProductNDC": "46708-060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Candesartan Cilexetil",
"NonProprietaryName": "Candesartan Cilexetil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209119",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "CANDESARTAN CILEXETIL",
"StrengthNumber": "32",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170621",
"SamplePackage": "N",
"IndicationAndUsage": "Candesartan cilexetil tablets are an angiotensin II receptor blocker (ARB) indicated for:. · Treatment of hypertension in adults and children 1 to <17 years of age, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions (1.1). · Treatment of heart failure (NYHA class II-IV); candesartan cilexetil tablets reduces cardiovascular death and heart failure hospitalization (1.2).",
"Description": "Candesartan cilexetil, a prodrug, is hydrolyzed to candesartan during absorption from the gastrointestinal tract. Candesartan is a selective AT1 subtype angiotensin II receptor antagonist. Candesartan cilexetil, a nonpeptide, is chemically described as (±) - 1 - Hydroxyethyl 2 - ethoxy - 1 - [ p - ( o - 1 H - tetrazol - 5 ylphenyl) benzyl] - 7 -benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is: Candesartan cilexetil, USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Candesartan cilexetil is available for oral use as tablet containing 32 mg of candesartan cilexetil, USP and the following inactive ingredients: mannitol, pullulan, carboxymethylcellulose calcium, corn starch, polyethylene glycol, hydroxypropyl cellulose, magnesium stearate and lactose monohydrate. The 32 mg tablet contains iron oxide red as a colorant."
},
{
"NDCCode": "46708-119-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (46708-119-90) ",
"NDC11Code": "46708-0119-90",
"ProductNDC": "46708-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203459",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "46708-120-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (46708-120-90) ",
"NDC11Code": "46708-0120-90",
"ProductNDC": "46708-120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203459",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "46708-121-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (46708-121-90) ",
"NDC11Code": "46708-0121-90",
"ProductNDC": "46708-121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203459",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide."
},
{
"NDCCode": "46708-122-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (46708-122-90) ",
"NDC11Code": "46708-0122-90",
"ProductNDC": "46708-122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203459",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190719",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-453-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-453-90) </PackageDescription>
<NDC11Code>46708-0453-90</NDC11Code>
<ProductNDC>46708-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-453-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 CARTON (46708-453-10) </PackageDescription>
<NDC11Code>46708-0453-10</NDC11Code>
<ProductNDC>46708-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-453-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-453-30) </PackageDescription>
<NDC11Code>46708-0453-30</NDC11Code>
<ProductNDC>46708-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-453-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-453-71) </PackageDescription>
<NDC11Code>46708-0453-71</NDC11Code>
<ProductNDC>46708-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>12634-453-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (12634-453-90)</PackageDescription>
<NDC11Code>12634-0453-90</NDC11Code>
<ProductNDC>12634-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090278</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Topiramate is indicated for: 1 Monotherapy epilepsy: Initial monotherapy in patients ≥ 2 years of age with partial onset or primary generalized tonic-clonic seizures ( 1.1) , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) ( 1.2) .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.37. Topiramate is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, pregelatinized maize starch, sodium starch glycolate type A potato, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. In addition, individual tablets contain:. 50 mg tablets: iron oxide yellow. 100 mg tablets: iron oxide yellow, and D&C Yellow # 10 Aluminum Lake. 200 mg tablets: iron oxide red, lecithin (soya), and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>16729-453-15</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (16729-453-15) </PackageDescription>
<NDC11Code>16729-0453-15</NDC11Code>
<ProductNDC>16729-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212399</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium may induce hyperthyroidism [see Warnings and Precautions(5.1)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4N NaO 4 H 2O, molecular weight of 798.86 (anhydrous), and structural formula as shown:. Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength. Levothyroxine sodium tablets, USP meets USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>50228-453-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50228-453-90) </PackageDescription>
<NDC11Code>50228-0453-90</NDC11Code>
<ProductNDC>50228-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205519</ApplicationNumber>
<LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin Calcium Tablets are indicated: 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD.</IndicationAndUsage>
<Description>Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-(R*,R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium, USP is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: lactose monohydrate, NF; colloidal silicon dioxide, NF; copovidone, NF; croscarmellose sodium, NF; magnesium stearate, NF; mannitol, USP; silicified microcrystalline cellulose, NF; sodium bicarbonate, USP; sodium carbonate anhydrous, NF; sodium lauryl sulfate, NF; hypromellose, polyethylene glycol, talc, titanium dioxide, and iron oxide yellow. This product meets the requirements of USP DissolutionTest-2.</Description>
</NDC>
<NDC>
<NDCCode>50228-453-91</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50228-453-91) </PackageDescription>
<NDC11Code>50228-0453-91</NDC11Code>
<ProductNDC>50228-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205519</ApplicationNumber>
<LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51407-453-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (51407-453-90) </PackageDescription>
<NDC11Code>51407-0453-90</NDC11Code>
<ProductNDC>51407-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine</ProprietaryName>
<NonProprietaryName>Venlafaxine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078627</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine tablets, USP is indicated for the treatment of major depressive disorder. The efficacy of venlafaxine tablets, USP in the treatment of major depressive disorder was established in 6 week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III or DSM-III-R category of major depression and in a 4 week controlled trial of inpatients meeting diagnostic criteria for major depression with melancholia (see CLINICAL TRIALS). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The efficacy of venlafaxine hydrochloride extended-release capsules in maintaining an antidepressant response for up to 26 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial. The efficacy of venlafaxine tablets, USP in maintaining an antidepressant response in patients with recurrent depression who had responded and continued to be improved during an initial 26 weeks of treatment and were then followed for a period of up to 52 weeks was demonstrated in a second placebo-controlled trial (see CLINICAL TRIALS). Nevertheless, the physician who elects to use venlafaxine tablets, USP/venlafaxine hydrochloride extended-release capsules for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Venlafaxine tablets, USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17H 27NO 2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride, USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg of venlafaxine base and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, sodium starch glycolate, iron oxide red, iron oxide yellow, colloidal silicon dioxide, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>55111-453-90</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (55111-453-90) </PackageDescription>
<NDC11Code>55111-0453-90</NDC11Code>
<ProductNDC>55111-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078421</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Ltd.</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of:. Major Depressive Disorder (MDD). Generalized Anxiety Disorder (GAD). Social Anxiety Disorder (SAD). Panic Disorder (PD).</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules USP for once-a-day oral administration contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.87. The structural formula is shown as follows. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol. Venlafaxine hydrochloride extended-release capsules USP are formulated as extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the mini-tablets and is not pH dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of basic butylated methacrylate copolymer, ethyl cellulose, gelatin, medium chain triglycerides, microcrystalline cellulose, povidone, red iron oxide, sodium stearyl fumarate, talc and titanium dioxide. In addition to the above 37.5 mg consists of black iron oxide and yellow iron oxide. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are ammonium hydroxide, propylene glycol, simethicone, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55700-453-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (55700-453-90) </PackageDescription>
<NDC11Code>55700-0453-90</NDC11Code>
<ProductNDC>55700-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090705</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62135-453-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (62135-453-90) </PackageDescription>
<NDC11Code>62135-0453-90</NDC11Code>
<ProductNDC>62135-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acarbose</ProprietaryName>
<NonProprietaryName>Acarbose</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202271</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>ACARBOSE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>alpha Glucosidase Inhibitors [MoA], alpha-Glucosidase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acarbose tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Acarbose Tablets, USP are an oral alpha-glucosidase inhibitor for use in the management of type 2 diabetes mellitus. Acarbose is an oligosaccharide which is obtained from fermentation processes of a microorganism, Actinoplanes utahensis, and is chemically known as O-4,6-dideoxy- 4-[[(1S,4R,5S,6S)-4,5,6-trihydroxy-3-(hydroxymethyl)-2-cyclohexen-1-yl] amino]- α-D-glucopyranosyl-(1 → 4)-O-α -D-glucopyranosyl-(1 → 4)-D-glucose. It is a white to off-white powder with a molecular weight of 645.6. Acarbose is soluble in water and has a pKa of 5.1. Its empirical formula is C 25H 43NO 18 and its chemical structure is as follows:. Acarbose Tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral use. The inactive ingredients are starch (corn starch), microcrystalline cellulose, magnesium stearate, and colloidal silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65862-453-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65862-453-90) </PackageDescription>
<NDC11Code>65862-0453-90</NDC11Code>
<ProductNDC>65862-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090778</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67877-453-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (67877-453-90) </PackageDescription>
<NDC11Code>67877-0453-90</NDC11Code>
<ProductNDC>67877-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207037</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>20; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, asappropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodiumintake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals andmanagement, see published guidelines, such as those of the National High Blood Pressure Education Program's JointNational Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC).Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablets are not indicated for the initial therapy of hypertension.</IndicationAndUsage>
<Description>Olmesartan medoxomil and hydrochlorothiazide tablets are combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCT-Z).Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate.Its empirical formula is C29H30N6O6and its structural formula is. Olmesartan medoxomil is a white to light yellowish-white powder or crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide tablets are available for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropylcellulose, hypromellose, lactose monohydrate, low-substituted hydroxypropylcellulose, magnesium stearate, microcrystalline cellulose, red iron oxide, talc, titanium dioxide and yellow iron oxide, stearic acid, polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>72189-453-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (72189-453-90) </PackageDescription>
<NDC11Code>72189-0453-90</NDC11Code>
<ProductNDC>72189-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202112</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see CLINICAL STUDIES (14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride tablets USP is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1-carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C24H34N4O5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. [Chemical Structure]. Glimepiride tablets USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, polysorbate 80, sodium starch glycolate, povidone, microcrystalline cellulose, and magnesium stearate. In addition, glimepiride 1 mg tablets contain Ferric Oxide Red and glimepiride 2 mg tablets contain Ferric Oxide Yellow.</Description>
</NDC>
<NDC>
<NDCCode>77771-453-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (77771-453-90) </PackageDescription>
<NDC11Code>77771-0453-90</NDC11Code>
<ProductNDC>77771-453</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205519</ApplicationNumber>
<LabelerName>Radha Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>46708-003-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-003-90) </PackageDescription>
<NDC11Code>46708-0003-90</NDC11Code>
<ProductNDC>46708-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078894</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>.125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>46708-004-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-004-90) </PackageDescription>
<NDC11Code>46708-0004-90</NDC11Code>
<ProductNDC>46708-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078894</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>46708-005-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-005-90) </PackageDescription>
<NDC11Code>46708-0005-90</NDC11Code>
<ProductNDC>46708-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078894</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>46708-006-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-006-90) </PackageDescription>
<NDC11Code>46708-0006-90</NDC11Code>
<ProductNDC>46708-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078894</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>46708-007-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-007-90) </PackageDescription>
<NDC11Code>46708-0007-90</NDC11Code>
<ProductNDC>46708-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078894</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. · Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>46708-044-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-044-90) </PackageDescription>
<NDC11Code>46708-0044-90</NDC11Code>
<ProductNDC>46708-044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091367</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red.</Description>
</NDC>
<NDC>
<NDCCode>46708-045-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-045-90) </PackageDescription>
<NDC11Code>46708-0045-90</NDC11Code>
<ProductNDC>46708-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091367</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red.</Description>
</NDC>
<NDC>
<NDCCode>46708-046-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-046-90) </PackageDescription>
<NDC11Code>46708-0046-90</NDC11Code>
<ProductNDC>46708-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091367</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red.</Description>
</NDC>
<NDC>
<NDCCode>46708-047-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-047-90) </PackageDescription>
<NDC11Code>46708-0047-90</NDC11Code>
<ProductNDC>46708-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091367</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>320</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red.</Description>
</NDC>
<NDC>
<NDCCode>46708-060-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (46708-060-90) </PackageDescription>
<NDC11Code>46708-0060-90</NDC11Code>
<ProductNDC>46708-060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Candesartan Cilexetil</ProprietaryName>
<NonProprietaryName>Candesartan Cilexetil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209119</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>CANDESARTAN CILEXETIL</SubstanceName>
<StrengthNumber>32</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Candesartan cilexetil tablets are an angiotensin II receptor blocker (ARB) indicated for:. · Treatment of hypertension in adults and children 1 to <17 years of age, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions (1.1). · Treatment of heart failure (NYHA class II-IV); candesartan cilexetil tablets reduces cardiovascular death and heart failure hospitalization (1.2).</IndicationAndUsage>
<Description>Candesartan cilexetil, a prodrug, is hydrolyzed to candesartan during absorption from the gastrointestinal tract. Candesartan is a selective AT1 subtype angiotensin II receptor antagonist. Candesartan cilexetil, a nonpeptide, is chemically described as (±) - 1 - Hydroxyethyl 2 - ethoxy - 1 - [ p - ( o - 1 H - tetrazol - 5 ylphenyl) benzyl] - 7 -benzimidazolecarboxylate, cyclohexyl carbonate (ester). Its empirical formula is C33H34N6O6, and its structural formula is: Candesartan cilexetil, USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Candesartan cilexetil is available for oral use as tablet containing 32 mg of candesartan cilexetil, USP and the following inactive ingredients: mannitol, pullulan, carboxymethylcellulose calcium, corn starch, polyethylene glycol, hydroxypropyl cellulose, magnesium stearate and lactose monohydrate. The 32 mg tablet contains iron oxide red as a colorant.</Description>
</NDC>
<NDC>
<NDCCode>46708-119-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (46708-119-90) </PackageDescription>
<NDC11Code>46708-0119-90</NDC11Code>
<ProductNDC>46708-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203459</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-120-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (46708-120-90) </PackageDescription>
<NDC11Code>46708-0120-90</NDC11Code>
<ProductNDC>46708-120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203459</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-121-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (46708-121-90) </PackageDescription>
<NDC11Code>46708-0121-90</NDC11Code>
<ProductNDC>46708-121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203459</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-122-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (46708-122-90) </PackageDescription>
<NDC11Code>46708-0122-90</NDC11Code>
<ProductNDC>46708-122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203459</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190719</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsule is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 17 years of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury. Pediatric use information is approved for Pfizer’s LYRICA (pregabalin) Capsules and Oral Solution products. However, due to Pfizer’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule shells contain red iron oxide which is used in 50 mg, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg strength of pregabalin capsules. The imprinting ink contains shellac, propylene glycol, black iron oxide, and potassium hydroxide.</Description>
</NDC>
</NDCList>