{
"NDC": [
{
"NDCCode": "46708-483-60",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-60) ",
"NDC11Code": "46708-0483-60",
"ProductNDC": "46708-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213075",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220104",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.",
"Description": "Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5."
},
{
"NDCCode": "46708-483-30",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-30) ",
"NDC11Code": "46708-0483-30",
"ProductNDC": "46708-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213075",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230307",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.",
"Description": "Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5."
},
{
"NDCCode": "46708-483-31",
"PackageDescription": "100 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-31) ",
"NDC11Code": "46708-0483-31",
"ProductNDC": "46708-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213075",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220104",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.",
"Description": "Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5."
},
{
"NDCCode": "46708-483-71",
"PackageDescription": "500 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-71) ",
"NDC11Code": "46708-0483-71",
"ProductNDC": "46708-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213075",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220104",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.",
"Description": "Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5."
},
{
"NDCCode": "31722-483-60",
"PackageDescription": "60 PACKET in 1 CARTON (31722-483-60) / 1 POWDER, FOR SOLUTION in 1 PACKET",
"NDC11Code": "31722-0483-60",
"ProductNDC": "31722-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "L-glutamine",
"NonProprietaryName": "L-glutamine",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20260526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219722",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "GLUTAMINE",
"StrengthNumber": "5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260526",
"SamplePackage": "N",
"IndicationAndUsage": "L-glutamine oral powder is indicated to reduce the acute complications of sickle cell disease in adult and pediatric patients 5 years of age and older.",
"Description": "L-glutamine, USP is an amino acid. L-glutamine is designated chemically as 2-aminoglutaramic acid, or (S)-2,5-diamino-5-oxopentanoic acid. The molecular formula is C 5H 10N 2O 3with the molecular weight of 146.14 g/mol and the following structural formula:. L-glutamine oral powder is formulated as a white crystalline powder and is packaged as 5 grams in a paper-foil-plastic laminate packet for oral administration."
},
{
"NDCCode": "33261-483-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (33261-483-60)",
"NDC11Code": "33261-0483-60",
"ProductNDC": "33261-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075964",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.",
"Description": "Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide."
},
{
"NDCCode": "33342-483-60",
"PackageDescription": "1 TUBE in 1 CARTON (33342-483-60) > 60 g in 1 TUBE",
"NDC11Code": "33342-0483-60",
"ProductNDC": "33342-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin And Triamcinolone Acetonide",
"NonProprietaryName": "Nystatin And Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214751",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "NYSTATIN; TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "100000; 1",
"StrengthUnit": "[USP'U]/g; mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Active",
"LastUpdate": "2021-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210901",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin and Triamcinolone Acetonide Ointment, USP is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.",
"Description": "Nystatin and Triamcinolone Acetonide Ointment, USP for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin, USP is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder, Freely soluble in dimethylformamide and in dimethyl sulfoxide; very slightly soluble in methanol; practically insoluble or insoluble in water, in alcohol, in n-propyl alcohol, in n-butyl alcohol, in chloroform and in ether. Structural formula: C47H75NO17 MW= 926.13 Triamcinolone acetonide, USP is designated chemically as 9-fluoro-11β, 16α, 17, 21- tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, Sparingly soluble in dehydrated alcohol, in chloroform and in methanol, Practically insoluble in water. Structural formula: C24H31FO6 MW= 434.50 Nystatin and Triamcinolone Acetonide Ointment USP, is a yellowish translucent ointment, Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide USP in an ointment base of mineral oil and white petrolatum."
},
{
"NDCCode": "55700-483-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (55700-483-60) ",
"NDC11Code": "55700-0483-60",
"ProductNDC": "55700-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090705",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20191004",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin is indicated for: 1 Postherpetic neuralgia in adults (1), 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy (1).",
"Description": "The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl) cyclohexane acetic acid. The molecular formula of gabapentin is C9H17NO2 and a molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP are supplied as imprinted hard gelatin capsules containing 100 mg, 300 mg and 400 mg of gabapentin, USP. The inactive ingredients are mannitol, pre-gelatinized starch and talc. The 100 mg capsule shell contains titanium dioxide. The 300 mg capsule contains FD&C Red 40, D&C Yellow 10 and titanium dioxide. The 400 mg capsule shell contains FD&C Red 40, D&C Yellow 10 and titanium dioxide."
},
{
"NDCCode": "62332-483-60",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (62332-483-60) ",
"NDC11Code": "62332-0483-60",
"ProductNDC": "62332-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213075",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220104",
"SamplePackage": "N",
"IndicationAndUsage": "Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9) Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).",
"Description": "Doxycycline hyclate delayed-release tablets, USP contain specially coated pellets of doxycycline hyclate, USP, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)] -4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2- carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg and 200 mg (equivalent to doxycycline hyclate 86.55 mg, 115.41 mg, 173.11 mg and 230.82). Inactive ingredients in the tablet formulation are: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, hypromellose, hypromellose phthalate, lactose anhydrous, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, povidone (K-30), sodium chloride, talc and triethyl citrate. Each doxycycline hyclate delayed-release tablets 75 mg contains 4.7 mg (0.204 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg contains 6.3 mg (0.274 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg contains 9.4 mg (0.409 mEq) of sodium and each doxycycline hyclate delayed-release tablets 200 mg contains 12.6 mg (0.548 mEq) of sodium. This drug product meets USP Dissolution Test 5."
},
{
"NDCCode": "69113-483-00",
"PackageDescription": "1 BOTTLE in 1 BOX (69113-483-00) / 60 mL in 1 BOTTLE",
"NDC11Code": "69113-0483-00",
"ProductNDC": "69113-483",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bosley Minoxidil Topical Solution 5 (for Men)",
"NonProprietaryName": "Minoxidil",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076239",
"LabelerName": "Scientific Hair Research, LLC",
"SubstanceName": "MINOXIDIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240506",
"SamplePackage": "N",
"IndicationAndUsage": "to regrow hair on the top of the scalp (vertex only, see picture on side of box)."
},
{
"NDCCode": "71205-483-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (71205-483-60) ",
"NDC11Code": "71205-0483-60",
"ProductNDC": "71205-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Pamoate",
"NonProprietaryName": "Hydroxyzine Pamoate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19840701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088496",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "HYDROXYZINE PAMOATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201008",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, Hydroxyzine may potentiate meperidine (Demerol®) and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine pamoate, USP is designated chemically as 1-(p-chlorobenzhydryl) 4-[2-(2-hydroxyethoxy) ethyl] diethylenediamine salt of 1,1′-methylene bis (2 hydroxy-3-naphthalene carboxylic acid). It has the following structural formula. C21H27ClN2O2C23H16O6 M.W. 763.27. Hydroxyzine Pamoate Capsules USP are administered in doses equivalent to 25 mg, 50 mg or 100 mg of hydroxyzine hydrochloride. In addition, each capsule contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, and pregelatinized corn starch. The 25 mg also contains anhydrous lactose. The 50 mg and 100 mg also contain lactose monohydrate. The capsule shell ingredients for the 25 mg capsule are D&C red no. 28, D&C yellow no. 10, FD&C blue no. 1, FD&C red no. 40, FD&C yellow no. 6, gelatin, and titanium dioxide. The 50 mg capsule shell contains D&C red no. 33, D&C yellow no. 10, FD&C yellow no. 6, gelatin, and titanium dioxide. The 100 mg capsule shell contains D&C red no. 28, D&C red no. 33, D&C yellow no. 10, FD&C blue no. 1, FD&C red no. 40, gelatin, and titanium dioxide. The edible imprinting ink on the 25 mg, 50 mg and 100 mg capsules contains black iron oxide, D&C yellow no. 10 aluminum lake, FD&C blue no. 1 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, propylene glycol, and shellac glaze."
},
{
"NDCCode": "71610-483-60",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-483-60) ",
"NDC11Code": "71610-0483-60",
"ProductNDC": "71610-483",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019962",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201110",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol Succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol Succinate is indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Angina Pectoris. (1.2), 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablet has been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: silicon dioxide, cellulose compounds, sodium stearyl fumarate, polyethylene glycol, titanium dioxide, paraffin."
},
{
"NDCCode": "46708-063-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (46708-063-60) ",
"NDC11Code": "46708-0063-60",
"ProductNDC": "46708-063",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine Tartrate",
"NonProprietaryName": "Rivastigmine Tartrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091689",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVASTIGMINE TARTRATE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120613",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).",
"Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
},
{
"NDCCode": "46708-064-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (46708-064-60) ",
"NDC11Code": "46708-0064-60",
"ProductNDC": "46708-064",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine Tartrate",
"NonProprietaryName": "Rivastigmine Tartrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091689",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVASTIGMINE TARTRATE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120613",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).",
"Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
},
{
"NDCCode": "46708-065-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (46708-065-60) ",
"NDC11Code": "46708-0065-60",
"ProductNDC": "46708-065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine Tartrate",
"NonProprietaryName": "Rivastigmine Tartrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091689",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVASTIGMINE TARTRATE",
"StrengthNumber": "4.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120613",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).",
"Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
},
{
"NDCCode": "46708-066-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (46708-066-60) ",
"NDC11Code": "46708-0066-60",
"ProductNDC": "46708-066",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine Tartrate",
"NonProprietaryName": "Rivastigmine Tartrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091689",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "RIVASTIGMINE TARTRATE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120613",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).",
"Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
},
{
"NDCCode": "46708-128-60",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (46708-128-60)",
"NDC11Code": "46708-0128-60",
"ProductNDC": "46708-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"ProprietaryNameSuffix": "20 Mg",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202949",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Duloxetine delayed-release capsuleis a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for: : 1 Major Depressive Disorder (MDD) (1.1), 2 Generalized Anxiety Disorder (GAD) (1.2), 3 Diabetic Peripheral Neuropathic Pain (DPNP) (1.3), 4 Chronic Musculoskeletal Pain (1.5).",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water.Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, talc, sucrose, hypromellose phthalate, triethyl citrate, FD&C Blue No.2, titanium dioxide, gelatine and sodium lauryl sulfate. The 20 and 60 mg capsules also contain iron oxide yellow, Ink contains following ingradients:20 mg: shellac, black iron oxide, potassium hydroxide, propylene glycol, strong ammonia solution30 mg: shellac, titanium dioxide, yellow iron oxide, FD&C Blue No. 2 Aluminium Lake, propylene glycol, strong ammonia solution60 mg: shellac, potassium hydroxide, titanium dioxide, propylene glycol, strong ammonia solution."
},
{
"NDCCode": "46708-138-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-138-60) ",
"NDC11Code": "46708-0138-60",
"ProductNDC": "46708-138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203390",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170221",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine fumarate is an atypical antipsychotic indicated for the treatment of. · Schizophrenia (1.1). · Bipolar I disorder manic episodes (1.2). · Bipolar disorder, depressive episodes (1.2).",
"Description": "Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate is a white to cream colored powder which is practically insoluble in water. Quetiapine fumarate tablets are supplied for oral administration as 25 mg (round, white to off-white), 50 mg (round, white to off-white), 100 mg (round, white to off-white), 200 mg (round, white to off-white), 300 mg (capsule-shaped, white to off-white), and 400 mg (capsule-shaped, white to off-white) tablets. Inactive ingredients are povidone, dibasic calcium phosphate anhydrous, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, hydroxypropyl cellulose and titanium dioxide."
},
{
"NDCCode": "46708-171-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-171-60) ",
"NDC11Code": "46708-0171-60",
"ProductNDC": "46708-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204974",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol."
},
{
"NDCCode": "46708-172-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-172-60) ",
"NDC11Code": "46708-0172-60",
"ProductNDC": "46708-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204974",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol."
},
{
"NDCCode": "46708-173-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-173-60) ",
"NDC11Code": "46708-0173-60",
"ProductNDC": "46708-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204974",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol."
},
{
"NDCCode": "46708-174-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-174-60) ",
"NDC11Code": "46708-0174-60",
"ProductNDC": "46708-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204974",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2023-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol."
},
{
"NDCCode": "46708-186-06",
"PackageDescription": "60 BLISTER PACK in 1 CARTON (46708-186-06) / 6 TABLET in 1 BLISTER PACK",
"NDC11Code": "46708-0186-06",
"ProductNDC": "46708-186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "80; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161122",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate, microcrystalline cellulose, corn starch, crospovidone, magnesium stearate, black iron oxide and FD&C blue #1- Alumium lake. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light."
},
{
"NDCCode": "46708-187-06",
"PackageDescription": "60 BLISTER PACK in 1 CARTON (46708-187-06) / 6 TABLET in 1 BLISTER PACK",
"NDC11Code": "46708-0187-06",
"ProductNDC": "46708-187",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "80; 10",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161122",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate, microcrystalline cellulose, corn starch, crospovidone, magnesium stearate, black iron oxide and FD&C blue #1- Alumium lake. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light."
},
{
"NDCCode": "46708-191-06",
"PackageDescription": "60 TABLET, COATED in 1 CARTON (46708-191-06) ",
"NDC11Code": "46708-0191-06",
"ProductNDC": "46708-191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Febuxostat",
"NonProprietaryName": "Febuxostat",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205421",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "FEBUXOSTAT",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190701",
"SamplePackage": "N",
"IndicationAndUsage": "Febuxostat tablets are xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. For the safe and effective use of allopurinol, see allopurinol prescribing information.Limitations of Use. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.",
"Description": "Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat tablet is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white to off white powder that is freely soluble in N,N-dimethylformamide; soluble in dimethyl sulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 201°C to 208°C. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, hydroxypropyl cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate and polyvinyl alcohol, talc, polyethylene glycol 3000, titanium dioxide, D&C yellow No. 10 aluminum Lake, FD&C blue No. 1 aluminum lake and FD&C blue No. 2 aluminum lake."
},
{
"NDCCode": "46708-198-60",
"PackageDescription": "60 BLISTER PACK in 1 CARTON (46708-198-60) / 10 TABLET in 1 BLISTER PACK (46708-198-10) ",
"NDC11Code": "46708-0198-60",
"ProductNDC": "46708-198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asenapine",
"NonProprietaryName": "Asenapine",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20201210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206098",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201210",
"SamplePackage": "N",
"IndicationAndUsage": "Asenapine is indicated for: Bipolar I disorder [see Clinical Studies (14.2)] Acute monotherapy of manic or mixed episodes, in pediatric patients 10 to 17 years of age Adjunctive treatment to lithium or valproate in adults.",
"Description": "Asenapine sublingual tablet contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3aRS,12bRS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1Hdibenzo[2,3:6,7]oxepino[4,5-c]pyrrole (2Z)-2 butenedioate (1:1). Its molecular formula is C17H16ClNO⋅C4H4O4 and its molecular weight is 401.84 (free base: 285.8). The chemical structure is. Asenapine maleate is off-white to white powder. Asenapine is supplied for sublingual administration in tablets containing 2.5-mg, 5-mg or 10-mg asenapine; inactive ingredients include povidone, butylated hydroxy toluene, butylated hydroxy anisole, mannitol, low-substituted hydroxypropyl cellulose, sodium stearyl fumarate."
},
{
"NDCCode": "46708-199-60",
"PackageDescription": "60 BLISTER PACK in 1 CARTON (46708-199-60) / 10 TABLET in 1 BLISTER PACK (46708-199-10) ",
"NDC11Code": "46708-0199-60",
"ProductNDC": "46708-199",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asenapine",
"NonProprietaryName": "Asenapine",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20201210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206098",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ASENAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201210",
"SamplePackage": "N",
"IndicationAndUsage": "Asenapine is indicated for: Bipolar I disorder [see Clinical Studies (14.2)] Acute monotherapy of manic or mixed episodes, in pediatric patients 10 to 17 years of age Adjunctive treatment to lithium or valproate in adults.",
"Description": "Asenapine sublingual tablet contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3aRS,12bRS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1Hdibenzo[2,3:6,7]oxepino[4,5-c]pyrrole (2Z)-2 butenedioate (1:1). Its molecular formula is C17H16ClNO⋅C4H4O4 and its molecular weight is 401.84 (free base: 285.8). The chemical structure is. Asenapine maleate is off-white to white powder. Asenapine is supplied for sublingual administration in tablets containing 2.5-mg, 5-mg or 10-mg asenapine; inactive ingredients include povidone, butylated hydroxy toluene, butylated hydroxy anisole, mannitol, low-substituted hydroxypropyl cellulose, sodium stearyl fumarate."
},
{
"NDCCode": "46708-241-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (46708-241-60) ",
"NDC11Code": "46708-0241-60",
"ProductNDC": "46708-241",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ticagrelor",
"NonProprietaryName": "Ticagrelor",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208576",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TICAGRELOR",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250501",
"SamplePackage": "N",
"IndicationAndUsage": "Ticagrelor tablet is a P2Y12 platelet inhibitor indicated to reduce the risk of cardiovascular (CV) death, myocardial infarction (MI), and stroke in patients with acute coronary syndrome (ACS) or a history of MI. For at least the first 12 months following ACS, it is superior to clopidogrel. Ticagrelor tablets also reduces the risk of stent thrombosis in patients who have been stented for treatment of ACS. (1.1) to reduce the risk of a first MI or stroke in patients with coronary artery disease (CAD) at high risk for such events. While use is not limited to this setting, the efficacy of ticagrelor tablet was established in a population with type 2 diabetes mellitus (T2DM). (1.2) to reduce the risk of stroke in patients with acute ischemic stroke (NIH Stroke Scale score ≤5) or high-risk transient ischemic attack (TIA). (1.3).",
"Description": "Ticagrelor tablets contain ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP-receptor. Chemically it is (1S,2S,3R,5S)-3-[7-{[(1R,2S)-2-(3,4-difluorophenyl)cyclopropyl]amino}-5-(propylthio)-3H-[1,2,3]-triazolo[4,5-d]pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol. The empirical formula of ticagrelor is C23H28F2N6O4S and its molecular weight is 522.57. The chemical structure of ticagrelor is. Ticagrelor is a white or off-white to pale pink powder, it is freely soluble in methanol and N, N- dimethylformamide. Practically insoluble in water. Ticagrelor tablets for oral administration contain 90 mg of ticagrelor and the following ingredients: dibasic calcium phosphate, magnesium stearate, mannitol, povidone K30 and sodium starch glycolate. The film coating material contains hypromellose, iron oxide yellow, polyethylene glycol 400, talc and titanium dioxide. Ticagrelor tablets for oral administration contain 60 mg of ticagrelor and the following ingredients: dibasic calcium phosphate, magnesium stearate, mannitol, povidone K30 and sodium starch glycolate. The film coating material contains hypromellose, iron oxide black, iron oxide red, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "46708-250-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (46708-250-60) ",
"NDC11Code": "46708-0250-60",
"ProductNDC": "46708-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209165",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170731",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections:. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by. Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline, USP is a broad - spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline monohydrate capsules USP, 100 mg and 75 mg contain doxycycline monohydrate equivalent to 100 mg and 75 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is alpha- 6- deoxy- 5- oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: microcrystalline cellulose; sodium starch glycolate; povidone; colloidal silicon dioxide; magnesium stearate; and a hard gelatin capsule which contains iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin and sodium lauryl sulphate. The capsule shells of 75 mg are printed with edible black ink containing shellac, propylene glycol, iron oxide black and potassium hydroxide. The cap of 100 mg capsule shells is printed with edible white ink containing shellac, propylene glycol, potassium hydroxide and titanium dioxide. The body of 100 mg capsule shells is printed with edible and brown ink containing shellac, propylene glycol, potassium hydroxide, iron oxide brown and iron oxide black."
},
{
"NDCCode": "46708-254-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (46708-254-60) ",
"NDC11Code": "46708-0254-60",
"ProductNDC": "46708-254",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202101",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150428",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole is indicated for the treatment of: Schizophrenia [see CLINICAL STUDIES (14.1)]. Additional pediatric use information is approved for Otsuka America Pharmaceutical, Inc.’s ABILIFY® (aripiprazole) product. However, due to Otsuka America Pharmaceutical, Inc.’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Aripiprazole is a psychotropic drug that is available as Aripiprazole Tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole Tablets are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, hydroxypropyl cellulose, lactose monohydrate, crospovidone, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose. Colorants include ferric oxide (yellow or red)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-483-60</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-60) </PackageDescription>
<NDC11Code>46708-0483-60</NDC11Code>
<ProductNDC>46708-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213075</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>46708-483-30</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-30) </PackageDescription>
<NDC11Code>46708-0483-30</NDC11Code>
<ProductNDC>46708-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213075</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>46708-483-31</NDCCode>
<PackageDescription>100 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-31) </PackageDescription>
<NDC11Code>46708-0483-31</NDC11Code>
<ProductNDC>46708-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213075</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>46708-483-71</NDCCode>
<PackageDescription>500 TABLET, DELAYED RELEASE in 1 BOTTLE (46708-483-71) </PackageDescription>
<NDC11Code>46708-0483-71</NDC11Code>
<ProductNDC>46708-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213075</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate delayed-release tablets and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is a tetracycline-class antibacterial indicated in the following conditions or disease.</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP for oral administration, contain specially coated pellets of doxycycline hyclate, USP, a broad-spectrum antibacterial synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration.The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical designation for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the tablet formulation are: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, sodium chloride, povidone (K-30), hypromellose, talc, hypromellose phthalate, triethyl citrate, polyethylene glycol 6000, corn starch, lactose anhydrous, low substituted hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide and magnesium stearate. This drug product meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>31722-483-60</NDCCode>
<PackageDescription>60 PACKET in 1 CARTON (31722-483-60) / 1 POWDER, FOR SOLUTION in 1 PACKET</PackageDescription>
<NDC11Code>31722-0483-60</NDC11Code>
<ProductNDC>31722-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>L-glutamine</ProprietaryName>
<NonProprietaryName>L-glutamine</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219722</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GLUTAMINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>L-glutamine oral powder is indicated to reduce the acute complications of sickle cell disease in adult and pediatric patients 5 years of age and older.</IndicationAndUsage>
<Description>L-glutamine, USP is an amino acid. L-glutamine is designated chemically as 2-aminoglutaramic acid, or (S)-2,5-diamino-5-oxopentanoic acid. The molecular formula is C 5H 10N 2O 3with the molecular weight of 146.14 g/mol and the following structural formula:. L-glutamine oral powder is formulated as a white crystalline powder and is packaged as 5 grams in a paper-foil-plastic laminate packet for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>33261-483-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (33261-483-60)</PackageDescription>
<NDC11Code>33261-0483-60</NDC11Code>
<ProductNDC>33261-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075964</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>33342-483-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (33342-483-60) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>33342-0483-60</NDC11Code>
<ProductNDC>33342-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214751</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>100000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin and Triamcinolone Acetonide Ointment, USP is indicated for the treatment of cutaneous candidiasis; it has been demonstrated that the nystatin-steroid combination provides greater benefit than the nystatin component alone during the first few days of treatment.</IndicationAndUsage>
<Description>Nystatin and Triamcinolone Acetonide Ointment, USP for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin, USP is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder, Freely soluble in dimethylformamide and in dimethyl sulfoxide; very slightly soluble in methanol; practically insoluble or insoluble in water, in alcohol, in n-propyl alcohol, in n-butyl alcohol, in chloroform and in ether. Structural formula: C47H75NO17 MW= 926.13 Triamcinolone acetonide, USP is designated chemically as 9-fluoro-11β, 16α, 17, 21- tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The white to cream crystalline powder has a slight odor, Sparingly soluble in dehydrated alcohol, in chloroform and in methanol, Practically insoluble in water. Structural formula: C24H31FO6 MW= 434.50 Nystatin and Triamcinolone Acetonide Ointment USP, is a yellowish translucent ointment, Each gram of Nystatin and Triamcinolone Acetonide Ointment provides 100,000 USP Nystatin units and 1 mg Triamcinolone Acetonide USP in an ointment base of mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>55700-483-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (55700-483-60) </PackageDescription>
<NDC11Code>55700-0483-60</NDC11Code>
<ProductNDC>55700-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090705</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin is indicated for: 1 Postherpetic neuralgia in adults (1), 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy (1).</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl) cyclohexane acetic acid. The molecular formula of gabapentin is C9H17NO2 and a molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP are supplied as imprinted hard gelatin capsules containing 100 mg, 300 mg and 400 mg of gabapentin, USP. The inactive ingredients are mannitol, pre-gelatinized starch and talc. The 100 mg capsule shell contains titanium dioxide. The 300 mg capsule contains FD&C Red 40, D&C Yellow 10 and titanium dioxide. The 400 mg capsule shell contains FD&C Red 40, D&C Yellow 10 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62332-483-60</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (62332-483-60) </PackageDescription>
<NDC11Code>62332-0483-60</NDC11Code>
<ProductNDC>62332-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213075</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9) Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP contain specially coated pellets of doxycycline hyclate, USP, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)] -4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2- carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg and 200 mg (equivalent to doxycycline hyclate 86.55 mg, 115.41 mg, 173.11 mg and 230.82). Inactive ingredients in the tablet formulation are: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, hypromellose, hypromellose phthalate, lactose anhydrous, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, povidone (K-30), sodium chloride, talc and triethyl citrate. Each doxycycline hyclate delayed-release tablets 75 mg contains 4.7 mg (0.204 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg contains 6.3 mg (0.274 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg contains 9.4 mg (0.409 mEq) of sodium and each doxycycline hyclate delayed-release tablets 200 mg contains 12.6 mg (0.548 mEq) of sodium. This drug product meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>69113-483-00</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (69113-483-00) / 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>69113-0483-00</NDC11Code>
<ProductNDC>69113-483</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bosley Minoxidil Topical Solution 5 (for Men)</ProprietaryName>
<NonProprietaryName>Minoxidil</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076239</ApplicationNumber>
<LabelerName>Scientific Hair Research, LLC</LabelerName>
<SubstanceName>MINOXIDIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to regrow hair on the top of the scalp (vertex only, see picture on side of box).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71205-483-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (71205-483-60) </PackageDescription>
<NDC11Code>71205-0483-60</NDC11Code>
<ProductNDC>71205-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Pamoate</ProprietaryName>
<NonProprietaryName>Hydroxyzine Pamoate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088496</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>HYDROXYZINE PAMOATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, Hydroxyzine may potentiate meperidine (Demerol®) and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine pamoate, USP is designated chemically as 1-(p-chlorobenzhydryl) 4-[2-(2-hydroxyethoxy) ethyl] diethylenediamine salt of 1,1′-methylene bis (2 hydroxy-3-naphthalene carboxylic acid). It has the following structural formula. C21H27ClN2O2C23H16O6 M.W. 763.27. Hydroxyzine Pamoate Capsules USP are administered in doses equivalent to 25 mg, 50 mg or 100 mg of hydroxyzine hydrochloride. In addition, each capsule contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, and pregelatinized corn starch. The 25 mg also contains anhydrous lactose. The 50 mg and 100 mg also contain lactose monohydrate. The capsule shell ingredients for the 25 mg capsule are D&C red no. 28, D&C yellow no. 10, FD&C blue no. 1, FD&C red no. 40, FD&C yellow no. 6, gelatin, and titanium dioxide. The 50 mg capsule shell contains D&C red no. 33, D&C yellow no. 10, FD&C yellow no. 6, gelatin, and titanium dioxide. The 100 mg capsule shell contains D&C red no. 28, D&C red no. 33, D&C yellow no. 10, FD&C blue no. 1, FD&C red no. 40, gelatin, and titanium dioxide. The edible imprinting ink on the 25 mg, 50 mg and 100 mg capsules contains black iron oxide, D&C yellow no. 10 aluminum lake, FD&C blue no. 1 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, propylene glycol, and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>71610-483-60</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71610-483-60) </PackageDescription>
<NDC11Code>71610-0483-60</NDC11Code>
<ProductNDC>71610-483</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019962</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol Succinate is a beta1-selective adrenoceptor blocking agent. Metoprolol Succinate is indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Angina Pectoris. (1.2), 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablet has been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: silicon dioxide, cellulose compounds, sodium stearyl fumarate, polyethylene glycol, titanium dioxide, paraffin.</Description>
</NDC>
<NDC>
<NDCCode>46708-063-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (46708-063-60) </PackageDescription>
<NDC11Code>46708-0063-60</NDC11Code>
<ProductNDC>46708-063</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
<NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091689</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).</IndicationAndUsage>
<Description>Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>46708-064-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (46708-064-60) </PackageDescription>
<NDC11Code>46708-0064-60</NDC11Code>
<ProductNDC>46708-064</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
<NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091689</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).</IndicationAndUsage>
<Description>Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>46708-065-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (46708-065-60) </PackageDescription>
<NDC11Code>46708-0065-60</NDC11Code>
<ProductNDC>46708-065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
<NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091689</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
<StrengthNumber>4.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).</IndicationAndUsage>
<Description>Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>46708-066-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (46708-066-60) </PackageDescription>
<NDC11Code>46708-0066-60</NDC11Code>
<ProductNDC>46708-066</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
<NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091689</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).</IndicationAndUsage>
<Description>Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>46708-128-60</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (46708-128-60)</PackageDescription>
<NDC11Code>46708-0128-60</NDC11Code>
<ProductNDC>46708-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>20 Mg</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202949</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Duloxetine delayed-release capsuleis a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for: : 1 Major Depressive Disorder (MDD) (1.1), 2 Generalized Anxiety Disorder (GAD) (1.2), 3 Diabetic Peripheral Neuropathic Pain (DPNP) (1.3), 4 Chronic Musculoskeletal Pain (1.5).</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water.Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, talc, sucrose, hypromellose phthalate, triethyl citrate, FD&C Blue No.2, titanium dioxide, gelatine and sodium lauryl sulfate. The 20 and 60 mg capsules also contain iron oxide yellow, Ink contains following ingradients:20 mg: shellac, black iron oxide, potassium hydroxide, propylene glycol, strong ammonia solution30 mg: shellac, titanium dioxide, yellow iron oxide, FD&C Blue No. 2 Aluminium Lake, propylene glycol, strong ammonia solution60 mg: shellac, potassium hydroxide, titanium dioxide, propylene glycol, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>46708-138-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-138-60) </PackageDescription>
<NDC11Code>46708-0138-60</NDC11Code>
<ProductNDC>46708-138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203390</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine fumarate is an atypical antipsychotic indicated for the treatment of. · Schizophrenia (1.1). · Bipolar I disorder manic episodes (1.2). · Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
<Description>Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is:. Quetiapine fumarate is a white to cream colored powder which is practically insoluble in water. Quetiapine fumarate tablets are supplied for oral administration as 25 mg (round, white to off-white), 50 mg (round, white to off-white), 100 mg (round, white to off-white), 200 mg (round, white to off-white), 300 mg (capsule-shaped, white to off-white), and 400 mg (capsule-shaped, white to off-white) tablets. Inactive ingredients are povidone, dibasic calcium phosphate anhydrous, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, hydroxypropyl cellulose and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-171-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-171-60) </PackageDescription>
<NDC11Code>46708-0171-60</NDC11Code>
<ProductNDC>46708-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204974</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>46708-172-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-172-60) </PackageDescription>
<NDC11Code>46708-0172-60</NDC11Code>
<ProductNDC>46708-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204974</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>46708-173-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-173-60) </PackageDescription>
<NDC11Code>46708-0173-60</NDC11Code>
<ProductNDC>46708-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204974</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>46708-174-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-174-60) </PackageDescription>
<NDC11Code>46708-0174-60</NDC11Code>
<ProductNDC>46708-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204974</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for. Treatment of partial-onset seizures in patients 4 years of age and older (1.1).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to off-white crystalline powder. It is freely soluble in dimethyl sulphoxide and in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>46708-186-06</NDCCode>
<PackageDescription>60 BLISTER PACK in 1 CARTON (46708-186-06) / 6 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0186-06</NDC11Code>
<ProductNDC>46708-186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161122</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>80; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate, microcrystalline cellulose, corn starch, crospovidone, magnesium stearate, black iron oxide and FD&C blue #1- Alumium lake. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light.</Description>
</NDC>
<NDC>
<NDCCode>46708-187-06</NDCCode>
<PackageDescription>60 BLISTER PACK in 1 CARTON (46708-187-06) / 6 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0187-06</NDC11Code>
<ProductNDC>46708-187</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161122</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>80; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is:. Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate, microcrystalline cellulose, corn starch, crospovidone, magnesium stearate, black iron oxide and FD&C blue #1- Alumium lake. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light.</Description>
</NDC>
<NDC>
<NDCCode>46708-191-06</NDCCode>
<PackageDescription>60 TABLET, COATED in 1 CARTON (46708-191-06) </PackageDescription>
<NDC11Code>46708-0191-06</NDC11Code>
<ProductNDC>46708-191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Febuxostat</ProprietaryName>
<NonProprietaryName>Febuxostat</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205421</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>FEBUXOSTAT</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Febuxostat tablets are xanthine oxidase (XO) inhibitor indicated for the chronic management of hyperuricemia in adult patients with gout who have an inadequate response to a maximally titrated dose of allopurinol, who are intolerant to allopurinol, or for whom treatment with allopurinol is not advisable. For the safe and effective use of allopurinol, see allopurinol prescribing information.Limitations of Use. Febuxostat tablets are not recommended for the treatment of asymptomatic hyperuricemia.</IndicationAndUsage>
<Description>Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat tablet is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The empirical formula is C16H16N2O3S. The chemical structure is. Febuxostat is a non-hygroscopic, white to off white powder that is freely soluble in N,N-dimethylformamide; soluble in dimethyl sulfoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 201°C to 208°C. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include: lactose monohydrate, microcrystalline cellulose, hydroxypropyl cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate and polyvinyl alcohol, talc, polyethylene glycol 3000, titanium dioxide, D&C yellow No. 10 aluminum Lake, FD&C blue No. 1 aluminum lake and FD&C blue No. 2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-198-60</NDCCode>
<PackageDescription>60 BLISTER PACK in 1 CARTON (46708-198-60) / 10 TABLET in 1 BLISTER PACK (46708-198-10) </PackageDescription>
<NDC11Code>46708-0198-60</NDC11Code>
<ProductNDC>46708-198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asenapine</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20201210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206098</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Asenapine is indicated for: Bipolar I disorder [see Clinical Studies (14.2)] Acute monotherapy of manic or mixed episodes, in pediatric patients 10 to 17 years of age Adjunctive treatment to lithium or valproate in adults.</IndicationAndUsage>
<Description>Asenapine sublingual tablet contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3aRS,12bRS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1Hdibenzo[2,3:6,7]oxepino[4,5-c]pyrrole (2Z)-2 butenedioate (1:1). Its molecular formula is C17H16ClNO⋅C4H4O4 and its molecular weight is 401.84 (free base: 285.8). The chemical structure is. Asenapine maleate is off-white to white powder. Asenapine is supplied for sublingual administration in tablets containing 2.5-mg, 5-mg or 10-mg asenapine; inactive ingredients include povidone, butylated hydroxy toluene, butylated hydroxy anisole, mannitol, low-substituted hydroxypropyl cellulose, sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>46708-199-60</NDCCode>
<PackageDescription>60 BLISTER PACK in 1 CARTON (46708-199-60) / 10 TABLET in 1 BLISTER PACK (46708-199-10) </PackageDescription>
<NDC11Code>46708-0199-60</NDC11Code>
<ProductNDC>46708-199</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asenapine</ProprietaryName>
<NonProprietaryName>Asenapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20201210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206098</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ASENAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Asenapine is indicated for: Bipolar I disorder [see Clinical Studies (14.2)] Acute monotherapy of manic or mixed episodes, in pediatric patients 10 to 17 years of age Adjunctive treatment to lithium or valproate in adults.</IndicationAndUsage>
<Description>Asenapine sublingual tablet contains asenapine maleate which is an atypical antipsychotic that is available for sublingual administration. Asenapine belongs to the class dibenzo-oxepino pyrroles. The chemical designation is (3aRS,12bRS)-5-Chloro-2-methyl-2,3,3a,12b-tetrahydro-1Hdibenzo[2,3:6,7]oxepino[4,5-c]pyrrole (2Z)-2 butenedioate (1:1). Its molecular formula is C17H16ClNO⋅C4H4O4 and its molecular weight is 401.84 (free base: 285.8). The chemical structure is. Asenapine maleate is off-white to white powder. Asenapine is supplied for sublingual administration in tablets containing 2.5-mg, 5-mg or 10-mg asenapine; inactive ingredients include povidone, butylated hydroxy toluene, butylated hydroxy anisole, mannitol, low-substituted hydroxypropyl cellulose, sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>46708-241-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (46708-241-60) </PackageDescription>
<NDC11Code>46708-0241-60</NDC11Code>
<ProductNDC>46708-241</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ticagrelor</ProprietaryName>
<NonProprietaryName>Ticagrelor</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208576</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TICAGRELOR</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ticagrelor tablet is a P2Y12 platelet inhibitor indicated to reduce the risk of cardiovascular (CV) death, myocardial infarction (MI), and stroke in patients with acute coronary syndrome (ACS) or a history of MI. For at least the first 12 months following ACS, it is superior to clopidogrel. Ticagrelor tablets also reduces the risk of stent thrombosis in patients who have been stented for treatment of ACS. (1.1) to reduce the risk of a first MI or stroke in patients with coronary artery disease (CAD) at high risk for such events. While use is not limited to this setting, the efficacy of ticagrelor tablet was established in a population with type 2 diabetes mellitus (T2DM). (1.2) to reduce the risk of stroke in patients with acute ischemic stroke (NIH Stroke Scale score ≤5) or high-risk transient ischemic attack (TIA). (1.3).</IndicationAndUsage>
<Description>Ticagrelor tablets contain ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP-receptor. Chemically it is (1S,2S,3R,5S)-3-[7-{[(1R,2S)-2-(3,4-difluorophenyl)cyclopropyl]amino}-5-(propylthio)-3H-[1,2,3]-triazolo[4,5-d]pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol. The empirical formula of ticagrelor is C23H28F2N6O4S and its molecular weight is 522.57. The chemical structure of ticagrelor is. Ticagrelor is a white or off-white to pale pink powder, it is freely soluble in methanol and N, N- dimethylformamide. Practically insoluble in water. Ticagrelor tablets for oral administration contain 90 mg of ticagrelor and the following ingredients: dibasic calcium phosphate, magnesium stearate, mannitol, povidone K30 and sodium starch glycolate. The film coating material contains hypromellose, iron oxide yellow, polyethylene glycol 400, talc and titanium dioxide. Ticagrelor tablets for oral administration contain 60 mg of ticagrelor and the following ingredients: dibasic calcium phosphate, magnesium stearate, mannitol, povidone K30 and sodium starch glycolate. The film coating material contains hypromellose, iron oxide black, iron oxide red, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-250-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (46708-250-60) </PackageDescription>
<NDC11Code>46708-0250-60</NDC11Code>
<ProductNDC>46708-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209165</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections:. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by. Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline, USP is a broad - spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline monohydrate capsules USP, 100 mg and 75 mg contain doxycycline monohydrate equivalent to 100 mg and 75 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is alpha- 6- deoxy- 5- oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: microcrystalline cellulose; sodium starch glycolate; povidone; colloidal silicon dioxide; magnesium stearate; and a hard gelatin capsule which contains iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin and sodium lauryl sulphate. The capsule shells of 75 mg are printed with edible black ink containing shellac, propylene glycol, iron oxide black and potassium hydroxide. The cap of 100 mg capsule shells is printed with edible white ink containing shellac, propylene glycol, potassium hydroxide and titanium dioxide. The body of 100 mg capsule shells is printed with edible and brown ink containing shellac, propylene glycol, potassium hydroxide, iron oxide brown and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>46708-254-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (46708-254-60) </PackageDescription>
<NDC11Code>46708-0254-60</NDC11Code>
<ProductNDC>46708-254</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202101</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole is indicated for the treatment of: Schizophrenia [see CLINICAL STUDIES (14.1)]. Additional pediatric use information is approved for Otsuka America Pharmaceutical, Inc.’s ABILIFY® (aripiprazole) product. However, due to Otsuka America Pharmaceutical, Inc.’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Aripiprazole is a psychotropic drug that is available as Aripiprazole Tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1piperazinyl]butoxy]-3,4-dihydrocarbostyril. The empirical formula is C23H27Cl2N3O2 and its molecular weight is 448.38. The chemical structure is. Aripiprazole Tablets are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, hydroxypropyl cellulose, lactose monohydrate, crospovidone, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose. Colorants include ferric oxide (yellow or red).</Description>
</NDC>
</NDCList>