{
"NDC": [
{
"NDCCode": "46708-485-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-485-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0485-15",
"ProductNDC": "46708-485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desonide",
"NonProprietaryName": "Desonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212473",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250307",
"SamplePackage": "N",
"IndicationAndUsage": "Desonide ointment, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.",
"Description": "Desonide ointment, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum."
},
{
"NDCCode": "46708-485-60",
"PackageDescription": "1 TUBE in 1 CARTON (46708-485-60) / 60 g in 1 TUBE",
"NDC11Code": "46708-0485-60",
"ProductNDC": "46708-485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desonide",
"NonProprietaryName": "Desonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212473",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250307",
"SamplePackage": "N",
"IndicationAndUsage": "Desonide ointment, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.",
"Description": "Desonide ointment, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum."
},
{
"NDCCode": "43744-485-15",
"PackageDescription": "10 g in 1 DRUM (43744-485-15)",
"NDC11Code": "43744-0485-15",
"ProductNDC": "43744-485",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Idebenone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "IDEBENONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-485-20",
"PackageDescription": "15 g in 1 DRUM (43744-485-20)",
"NDC11Code": "43744-0485-20",
"ProductNDC": "43744-485",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Idebenone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "IDEBENONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "50268-485-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-485-15) > 1 TABLET in 1 BLISTER PACK (50268-485-11)",
"NDC11Code": "50268-0485-15",
"ProductNDC": "50268-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-diarrheal",
"NonProprietaryName": "Loperamide Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076497",
"LabelerName": "AvPAK",
"SubstanceName": "LOPERAMIDE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2015-02-27"
},
{
"NDCCode": "62332-485-15",
"PackageDescription": "1 TUBE in 1 CARTON (62332-485-15) / 15 g in 1 TUBE",
"NDC11Code": "62332-0485-15",
"ProductNDC": "62332-485",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desonide",
"NonProprietaryName": "Desonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191024",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212473",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191024",
"SamplePackage": "N",
"IndicationAndUsage": "Desonide ointment USP, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.",
"Description": "Desonide ointment USP, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment USP, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment USP, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum."
},
{
"NDCCode": "71919-485-07",
"PackageDescription": "15 mL in 1 VIAL, GLASS (71919-485-07) ",
"NDC11Code": "71919-0485-07",
"ProductNDC": "71919-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Natrum Phosphoricum",
"NonProprietaryName": "Sodium Phosphate, Dibasic, Heptahydrate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "78019-485-16",
"PackageDescription": "150 PACKAGE in 1 PACKAGE (78019-485-16) > 120 PACKAGE in 1 PACKAGE (78019-485-13) > 110 PACKAGE in 1 PACKAGE (78019-485-12) > 100 PACKAGE in 1 PACKAGE (78019-485-11) > 80 PACKAGE in 1 PACKAGE (78019-485-80) > 60 PACKAGE in 1 PACKAGE (78019-485-60) > 50 PACKAGE in 1 PACKAGE (78019-485-50) > 25 PACKAGE in 1 PACKAGE (78019-485-25) > 20 PATCH in 1 PACKAGE (78019-485-20) > 3.5 mL in 1 PATCH (78019-485-15) ",
"NDC11Code": "78019-0485-16",
"ProductNDC": "78019-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Wecareyou Alcohol Wipes",
"NonProprietaryName": "Alcohol Wipes",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200526",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Cangnan Sky Package Material Co., Ltd",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200526",
"SamplePackage": "N"
},
{
"NDCCode": "84522-485-02",
"PackageDescription": "15 g in 1 BOX (84522-485-02) ",
"NDC11Code": "84522-0485-02",
"ProductNDC": "84522-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Body Balm",
"NonProprietaryName": "Body Balm",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241213",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241213",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84756-485-02",
"PackageDescription": "15 g in 1 BOX (84756-485-02) ",
"NDC11Code": "84756-0485-02",
"ProductNDC": "84756-485",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tratay Polypeptide Cream",
"NonProprietaryName": "Tratay Polypeptide Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241126",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Luoxin E �Commerce Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241126",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "46708-177-15",
"PackageDescription": "30 TABLET, COATED in 1 CARTON (46708-177-15) ",
"NDC11Code": "46708-0177-15",
"ProductNDC": "46708-177",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tadalafil",
"NonProprietaryName": "Tadalafil",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204809",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TADALAFIL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190326",
"SamplePackage": "N",
"IndicationAndUsage": "Tadalafil tablets USP are phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of:. · erectile dysfunction (ED) (1.1). · the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2). · ED and the signs and symptoms of BPH (ED/BPH) (1.3). If tadalafil tablets USP are used with finasteride to initiate BPH treatment, such use is recommended for up to 26 weeks (1.4).",
"Description": "Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1’,2’:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a white to off white powder that is slightly soluble in dichloromethane and very slightly soluble in methanol. Tadalafil tablets USP are available as round shaped tablets (2.5 mg, 5 mg and 10 mg) and oval shaped tablets (20 mg) for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil and the following inactive ingredients: hydroxy propyl cellulose, lactose monohydrate, croscarmellose sodium, sodium lauryl sulphate, povidone k-25, colloidal silicone dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol 6000, talc and iron oxide yellow."
},
{
"NDCCode": "46708-178-15",
"PackageDescription": "30 TABLET, COATED in 1 CARTON (46708-178-15) ",
"NDC11Code": "46708-0178-15",
"ProductNDC": "46708-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tadalafil",
"NonProprietaryName": "Tadalafil",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204809",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TADALAFIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190326",
"SamplePackage": "N",
"IndicationAndUsage": "Tadalafil tablets USP are phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of:. · erectile dysfunction (ED) (1.1). · the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2). · ED and the signs and symptoms of BPH (ED/BPH) (1.3). If tadalafil tablets USP are used with finasteride to initiate BPH treatment, such use is recommended for up to 26 weeks (1.4).",
"Description": "Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1’,2’:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a white to off white powder that is slightly soluble in dichloromethane and very slightly soluble in methanol. Tadalafil tablets USP are available as round shaped tablets (2.5 mg, 5 mg and 10 mg) and oval shaped tablets (20 mg) for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil and the following inactive ingredients: hydroxy propyl cellulose, lactose monohydrate, croscarmellose sodium, sodium lauryl sulphate, povidone k-25, colloidal silicone dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol 6000, talc and iron oxide yellow."
},
{
"NDCCode": "46708-465-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-465-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0465-15",
"ProductNDC": "46708-465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211800",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250212",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol Propionate Ointment USP, 0.05% is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate is a white to cream-colored crystalline powder insoluble in water. Chemically, it is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Each gram of the 0.05% ointment contains clobetasol propionate 0.5 mg in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum."
},
{
"NDCCode": "46708-547-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-547-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0547-15",
"ProductNDC": "46708-547",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213291",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250326",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate cream, USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.",
"Description": "Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, USP a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate, USP is Pregna-1,4-diene-3,20-dione, 21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-, (11β,16β), and it has the following structural formula. Clobetasol propionate, USP has the molecular formula C25H32ClFO5 and a molecular weight of 466.97. It is a white to almost white crystalline powder insoluble in water. Clobetasol Propionate Cream USP, 0.05% contains clobetasol propionate, USP 0.5 mg/g in a cream base composed of anhydrous citric acid, cetyl alcohol, glycol stearate, lanolin oil, methylparaben, PEG-8 stearate, polysorbate 60, propylene glycol, propylparaben, purified water, sodium citrate, stearyl alcohol, and white petrolatum. Sodium hydroxide may be used to adjust pH."
},
{
"NDCCode": "46708-549-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-549-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0549-15",
"ProductNDC": "46708-549",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213508",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "3",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250326",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene gel, 0.3% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.",
"Description": "Adapalene Gel USP, 0.3% contains adapalene USP, 0.3% (3 mg/g) in a topical aqueous gel for use in the treatment of acne vulgaris, consisting of carbopol 980, edetate disodium, methylparaben, poloxamer 124, propylene glycol, purified water, and sodium hydroxide. May contain hydrochloric acid for pH adjustment. The chemical name of adapalene, USP is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder, which is soluble in tetrahydrofuran, very slightly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.53. Adapalene, USP is represented by the following structural formula."
},
{
"NDCCode": "46708-606-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-606-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0606-15",
"ProductNDC": "46708-606",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin And Triamcinolone Acetonide",
"NonProprietaryName": "Nystatin And Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214090",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "NYSTATIN; TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "100000; 1",
"StrengthUnit": "[USP'U]/g; mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250408",
"SamplePackage": "N",
"Description": "Nystatin and triamcinolone acetonide cream, USP for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereal-like odor, practically insoluble or insoluble in water and in alcohol. Structural formula. C47H75NO17 MW = 926.23. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17- [(1-methylethylidene)bis(oxy)]-, (11β,16α)-9-fluoro-11b,16a,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17- acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.51. Nystatin and triamcinolone acetonide cream, USP is a soft, smooth cream having a light yellow to buff color. Each gram contains 100,000 USP nystatin units and 1 mg triamcinolone acetonide USP in a cream base of polysorbate-60, aluminum hydroxide gel, titanium dioxide, mono-and di-glycerides, polyoxyl 8 stearate, simethicone emulsion, sorbic acid, propylene glycol, white petrolatum, polyoxyl 20- cetostearyl ether, methylparaben, propylparaben, noncrystallizing sorbitol solution and purified water."
},
{
"NDCCode": "46708-624-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-624-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0624-15",
"ProductNDC": "46708-624",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mupirocin",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213053",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "MUPIROCIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250318",
"SamplePackage": "N",
"IndicationAndUsage": "Mupirocin cream is indicated for the treatment of secondarily infected traumatic skin lesions (up to 10 cm in length or 100 cm2in area) due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).",
"Description": "Mupirocin cream USP, 2% contains the dihydrate crystalline calcium hemi-salt of the RNA synthetase inhibitor antibacterial, mupirocin. Chemically, it is (αE,2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid, calcium salt (2:1), dihydrate. The molecular formula of mupirocin calcium is (C26H43O9)2Ca2H2O, and the molecular weight is 1075.3. The molecular weight of mupirocin free acid is 500.6. The structural formula of mupirocin calcium is:. Each gram of mupirocin cream USP, 2% contains 20 mg (2% w/w) of mupirocin equivalent to 21.5 mg (2.15% w/w) of mupirocin calcium, USP. The inactive ingredients are benzyl alcohol, glycerol monostearate, mineral oil, phenoxyethanol, polyoxyl 20 cetostearyl ether, purified water, and xanthan gum."
},
{
"NDCCode": "46708-632-15",
"PackageDescription": "1 TUBE in 1 CARTON (46708-632-15) / 15 g in 1 TUBE",
"NDC11Code": "46708-0632-15",
"ProductNDC": "46708-632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desonide",
"NonProprietaryName": "Desonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214396",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250429",
"SamplePackage": "N",
"IndicationAndUsage": "Desonide cream, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.",
"Description": "Desonide cream, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, USP the active ingredient in desonide cream, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0."
},
{
"NDCCode": "46708-661-15",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-661-15) / 15 mL in 1 BOTTLE",
"NDC11Code": "46708-0661-15",
"ProductNDC": "46708-661",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate Ophthalmic Solution, 0.15%",
"NonProprietaryName": "Brimonidine Tartrate Ophthalmic Solution, 0.15%",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215225",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230329",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution, 0.15% is an alpha adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In solution, brimonidine tartrate ophthalmic solution has a clear, greenish-yellow color. It has an osmolality of 250-350 mOsmol/kg and a pH of 6.6-7.4. Brimonidine tartrate appears as wheatish to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "46708-706-15",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (46708-706-15) / 15 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "46708-0706-15",
"ProductNDC": "46708-706",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate And Timolol Maleate",
"NonProprietaryName": "Brimonidine Tartrate And Timolol Maleate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215230",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BRIMONIDINE TARTRATE; TIMOLOL MALEATE",
"StrengthNumber": "2; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230825",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate and timolol maleate ophthalmic solution 0.2% /0.5% is an alpha-adrenergic receptor agonist with a beta-adrenergic receptor inhibitor indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP; the IOP-lowering of brimonidine tartrate and timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.",
"Description": "Brimonidine tartrate and timolol maleate ophthalmic solution 0.2%/0.5%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist with a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent). The structural formulae are: Brimonidine tartrate. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. Timolol maleate. (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); MW= 432.50 as the maleate salt. In solution, brimonidine tartrate and timolol maleate ophthalmic solution 0.2% /0.5% has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as an off-white, or white to pale-yellow powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of brimonidine tartrate and timolol maleate ophthalmic solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% with the inactive ingredients benzalkonium chloride 0.005%; sodium phosphate, monobasic; sodium phosphate, dibasic; purified water; and hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "46708-749-15",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-749-15) / 15 mL in 1 BOTTLE",
"NDC11Code": "46708-0749-15",
"ProductNDC": "46708-749",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216909",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution, 0.1% is an alpha adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Brimonidine tartrate ophthalmic solution 0.1%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In solution, brimonidine tartrate ophthalmic solution has a clear, greenish-yellow color. It has an osmolality of 250-350 mOsmol/kg and a pH of 7.4-8.0. Brimonidine tartrate appears as wheatish to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.1% (1.0 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "46708-770-15",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (46708-770-15) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "46708-0770-15",
"ProductNDC": "46708-770",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20260302",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217278",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260302",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine orally disintegrating tablets are indicated for:Epilepsy - adjunctive therapy in patients aged 2 years and older: partial-onset seizures. primary generalized tonic-clonic (PGTC) seizures. generalized seizures of Lennox-Gastaut syndrome. (1.1). Epilepsy - monotherapy in patients aged 16 years and older: Conversion to monotherapy in patients with partial-onset seizures who are receiving treatment with carbamazepine, phenytoin, phenobarbital, primidone, or valproate as the single antiepileptic drug. (1.1)Bipolar disorder: Maintenance treatment of bipolar I disorder to delay the time to occurrence of mood episodes in patients treated for acute mood episodes with standard therapy. (1.2) Limitations of Use: Treatment of acute manic or mixed episodes is not recommended. Effectiveness of lamotrigine orally disintegrating tablets in the acute treatment of mood episodes has not been established.",
"Description": "Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pKa of 5.7. Lamotrigine is slightly soluble in anhydrous ethanol and in 0.1M hydrochloric acid. The structural formula is. Lamotrigine orally disintegrating tablets, USP are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: amino methacrylate copolymer, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and sucralose. Composition of peppermint flavor: Maltodextrin, modified corn starch and natural flavours. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with amino methacrylate copolymer for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile."
},
{
"NDCCode": "46708-771-15",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (46708-771-15) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "46708-0771-15",
"ProductNDC": "46708-771",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20260302",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217278",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260302",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine orally disintegrating tablets are indicated for:Epilepsy - adjunctive therapy in patients aged 2 years and older: partial-onset seizures. primary generalized tonic-clonic (PGTC) seizures. generalized seizures of Lennox-Gastaut syndrome. (1.1). Epilepsy - monotherapy in patients aged 16 years and older: Conversion to monotherapy in patients with partial-onset seizures who are receiving treatment with carbamazepine, phenytoin, phenobarbital, primidone, or valproate as the single antiepileptic drug. (1.1)Bipolar disorder: Maintenance treatment of bipolar I disorder to delay the time to occurrence of mood episodes in patients treated for acute mood episodes with standard therapy. (1.2) Limitations of Use: Treatment of acute manic or mixed episodes is not recommended. Effectiveness of lamotrigine orally disintegrating tablets in the acute treatment of mood episodes has not been established.",
"Description": "Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pKa of 5.7. Lamotrigine is slightly soluble in anhydrous ethanol and in 0.1M hydrochloric acid. The structural formula is. Lamotrigine orally disintegrating tablets, USP are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: amino methacrylate copolymer, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and sucralose. Composition of peppermint flavor: Maltodextrin, modified corn starch and natural flavours. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with amino methacrylate copolymer for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile."
},
{
"NDCCode": "46708-077-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-077-30) ",
"NDC11Code": "46708-0077-30",
"ProductNDC": "46708-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prucalopride",
"NonProprietaryName": "Prucalopride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRUCALOPRIDE SUCCINATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Prucalopride tablet is indicated for the treatment of chronic idiopathic constipation (CIC) in adults.",
"Description": "Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to off-white powder. It is freely soluble in 0.1N HCl and soluble in N, N-Dimethyl formamide, sparingly soluble in methanol, practically insoluble in ethyl acetate. Each 1-mg film-coated prucalopride tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains hypromellose, polyethylene glycol 400 and titanium dioxide. Each 2-mg film-coated prucalopride tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains ferrosoferric oxide, hypromellose, iron oxide red, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "46708-078-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-078-30) ",
"NDC11Code": "46708-0078-30",
"ProductNDC": "46708-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prucalopride",
"NonProprietaryName": "Prucalopride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "PRUCALOPRIDE SUCCINATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Prucalopride tablet is indicated for the treatment of chronic idiopathic constipation (CIC) in adults.",
"Description": "Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to off-white powder. It is freely soluble in 0.1N HCl and soluble in N, N-Dimethyl formamide, sparingly soluble in methanol, practically insoluble in ethyl acetate. Each 1-mg film-coated prucalopride tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains hypromellose, polyethylene glycol 400 and titanium dioxide. Each 2-mg film-coated prucalopride tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains ferrosoferric oxide, hypromellose, iron oxide red, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "0143-9161-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9161-10) / 513 mg in 1 VIAL (0143-9161-01) ",
"NDC11Code": "00143-9161-10",
"ProductNDC": "0143-9161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "513",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241203",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9161-25",
"PackageDescription": "25 VIAL in 1 PACKAGE (0143-9161-25) / 513 mg in 1 VIAL (0143-9161-01) ",
"NDC11Code": "00143-9161-25",
"ProductNDC": "0143-9161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "513",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230202",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9162-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9162-10) / 1025 mg in 1 VIAL (0143-9162-01) ",
"NDC11Code": "00143-9162-10",
"ProductNDC": "0143-9162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1025",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230202",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9473-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9473-10) / 769 mg in 1 VIAL (0143-9473-01) ",
"NDC11Code": "00143-9473-10",
"ProductNDC": "0143-9473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20250813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "769",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250813",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9474-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9474-10) / 1280 mg in 1 VIAL (0143-9474-01) ",
"NDC11Code": "00143-9474-10",
"ProductNDC": "0143-9474",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20250813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1280",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250813",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-485-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-485-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0485-15</NDC11Code>
<ProductNDC>46708-485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desonide</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212473</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desonide ointment, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
<Description>Desonide ointment, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>46708-485-60</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-485-60) / 60 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0485-60</NDC11Code>
<ProductNDC>46708-485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desonide</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212473</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desonide ointment, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
<Description>Desonide ointment, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>43744-485-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-485-15)</PackageDescription>
<NDC11Code>43744-0485-15</NDC11Code>
<ProductNDC>43744-485</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Idebenone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>IDEBENONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-485-20</NDCCode>
<PackageDescription>15 g in 1 DRUM (43744-485-20)</PackageDescription>
<NDC11Code>43744-0485-20</NDC11Code>
<ProductNDC>43744-485</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Idebenone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>IDEBENONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50268-485-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-485-15) > 1 TABLET in 1 BLISTER PACK (50268-485-11)</PackageDescription>
<NDC11Code>50268-0485-15</NDC11Code>
<ProductNDC>50268-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-diarrheal</ProprietaryName>
<NonProprietaryName>Loperamide Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076497</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>LOPERAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-02-27</LastUpdate>
</NDC>
<NDC>
<NDCCode>62332-485-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (62332-485-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>62332-0485-15</NDC11Code>
<ProductNDC>62332-485</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desonide</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191024</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212473</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desonide ointment USP, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
<Description>Desonide ointment USP, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide ointment USP, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is white to off-white powder. The solubility of desonide in distilled water saturated with the ether is 184 mg/L. Each gram of desonide ointment USP, 0.05% contains 0.5 mg of desonide microdispersed in a base of white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>71919-485-07</NDCCode>
<PackageDescription>15 mL in 1 VIAL, GLASS (71919-485-07) </PackageDescription>
<NDC11Code>71919-0485-07</NDC11Code>
<ProductNDC>71919-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Natrum Phosphoricum</ProprietaryName>
<NonProprietaryName>Sodium Phosphate, Dibasic, Heptahydrate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, DIBASIC, HEPTAHYDRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>78019-485-16</NDCCode>
<PackageDescription>150 PACKAGE in 1 PACKAGE (78019-485-16) > 120 PACKAGE in 1 PACKAGE (78019-485-13) > 110 PACKAGE in 1 PACKAGE (78019-485-12) > 100 PACKAGE in 1 PACKAGE (78019-485-11) > 80 PACKAGE in 1 PACKAGE (78019-485-80) > 60 PACKAGE in 1 PACKAGE (78019-485-60) > 50 PACKAGE in 1 PACKAGE (78019-485-50) > 25 PACKAGE in 1 PACKAGE (78019-485-25) > 20 PATCH in 1 PACKAGE (78019-485-20) > 3.5 mL in 1 PATCH (78019-485-15) </PackageDescription>
<NDC11Code>78019-0485-16</NDC11Code>
<ProductNDC>78019-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Wecareyou Alcohol Wipes</ProprietaryName>
<NonProprietaryName>Alcohol Wipes</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200526</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Cangnan Sky Package Material Co., Ltd</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>84522-485-02</NDCCode>
<PackageDescription>15 g in 1 BOX (84522-485-02) </PackageDescription>
<NDC11Code>84522-0485-02</NDC11Code>
<ProductNDC>84522-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Body Balm</ProprietaryName>
<NonProprietaryName>Body Balm</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84756-485-02</NDCCode>
<PackageDescription>15 g in 1 BOX (84756-485-02) </PackageDescription>
<NDC11Code>84756-0485-02</NDC11Code>
<ProductNDC>84756-485</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tratay Polypeptide Cream</ProprietaryName>
<NonProprietaryName>Tratay Polypeptide Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241126</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Luoxin E �Commerce Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>46708-177-15</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 CARTON (46708-177-15) </PackageDescription>
<NDC11Code>46708-0177-15</NDC11Code>
<ProductNDC>46708-177</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tadalafil</ProprietaryName>
<NonProprietaryName>Tadalafil</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204809</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TADALAFIL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tadalafil tablets USP are phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of:. · erectile dysfunction (ED) (1.1). · the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2). · ED and the signs and symptoms of BPH (ED/BPH) (1.3). If tadalafil tablets USP are used with finasteride to initiate BPH treatment, such use is recommended for up to 26 weeks (1.4).</IndicationAndUsage>
<Description>Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1’,2’:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a white to off white powder that is slightly soluble in dichloromethane and very slightly soluble in methanol. Tadalafil tablets USP are available as round shaped tablets (2.5 mg, 5 mg and 10 mg) and oval shaped tablets (20 mg) for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil and the following inactive ingredients: hydroxy propyl cellulose, lactose monohydrate, croscarmellose sodium, sodium lauryl sulphate, povidone k-25, colloidal silicone dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol 6000, talc and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>46708-178-15</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 CARTON (46708-178-15) </PackageDescription>
<NDC11Code>46708-0178-15</NDC11Code>
<ProductNDC>46708-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tadalafil</ProprietaryName>
<NonProprietaryName>Tadalafil</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204809</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TADALAFIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tadalafil tablets USP are phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of:. · erectile dysfunction (ED) (1.1). · the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2). · ED and the signs and symptoms of BPH (ED/BPH) (1.3). If tadalafil tablets USP are used with finasteride to initiate BPH treatment, such use is recommended for up to 26 weeks (1.4).</IndicationAndUsage>
<Description>Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1’,2’:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a white to off white powder that is slightly soluble in dichloromethane and very slightly soluble in methanol. Tadalafil tablets USP are available as round shaped tablets (2.5 mg, 5 mg and 10 mg) and oval shaped tablets (20 mg) for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil and the following inactive ingredients: hydroxy propyl cellulose, lactose monohydrate, croscarmellose sodium, sodium lauryl sulphate, povidone k-25, colloidal silicone dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol 6000, talc and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>46708-465-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-465-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0465-15</NDC11Code>
<ProductNDC>46708-465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211800</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol Propionate Ointment USP, 0.05% is super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate is a white to cream-colored crystalline powder insoluble in water. Chemically, it is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Each gram of the 0.05% ointment contains clobetasol propionate 0.5 mg in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>46708-547-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-547-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0547-15</NDC11Code>
<ProductNDC>46708-547</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213291</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate cream, USP is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
<Description>Clobetasol Propionate Cream USP, 0.05% contain the active compound clobetasol propionate, USP a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate, USP is Pregna-1,4-diene-3,20-dione, 21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-, (11β,16β), and it has the following structural formula. Clobetasol propionate, USP has the molecular formula C25H32ClFO5 and a molecular weight of 466.97. It is a white to almost white crystalline powder insoluble in water. Clobetasol Propionate Cream USP, 0.05% contains clobetasol propionate, USP 0.5 mg/g in a cream base composed of anhydrous citric acid, cetyl alcohol, glycol stearate, lanolin oil, methylparaben, PEG-8 stearate, polysorbate 60, propylene glycol, propylparaben, purified water, sodium citrate, stearyl alcohol, and white petrolatum. Sodium hydroxide may be used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>46708-549-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-549-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0549-15</NDC11Code>
<ProductNDC>46708-549</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213508</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene gel, 0.3% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.</IndicationAndUsage>
<Description>Adapalene Gel USP, 0.3% contains adapalene USP, 0.3% (3 mg/g) in a topical aqueous gel for use in the treatment of acne vulgaris, consisting of carbopol 980, edetate disodium, methylparaben, poloxamer 124, propylene glycol, purified water, and sodium hydroxide. May contain hydrochloric acid for pH adjustment. The chemical name of adapalene, USP is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder, which is soluble in tetrahydrofuran, very slightly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.53. Adapalene, USP is represented by the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>46708-606-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-606-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0606-15</NDC11Code>
<ProductNDC>46708-606</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin And Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Nystatin And Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214090</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>NYSTATIN; TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>100000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Nystatin and triamcinolone acetonide cream, USP for dermatologic use contain the antifungal agent nystatin and the synthetic corticosteroid triamcinolone acetonide. Nystatin is a polyene antimycotic obtained from Streptomyces noursei. It is a yellow to light tan powder with a cereal-like odor, practically insoluble or insoluble in water and in alcohol. Structural formula. C47H75NO17 MW = 926.23. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17- [(1-methylethylidene)bis(oxy)]-, (11β,16α)-9-fluoro-11b,16a,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17- acetal with acetone. The white to cream crystalline powder has a slight odor, is practically insoluble in water, and very soluble in alcohol. Structural formula. C24H31FO6 MW = 434.51. Nystatin and triamcinolone acetonide cream, USP is a soft, smooth cream having a light yellow to buff color. Each gram contains 100,000 USP nystatin units and 1 mg triamcinolone acetonide USP in a cream base of polysorbate-60, aluminum hydroxide gel, titanium dioxide, mono-and di-glycerides, polyoxyl 8 stearate, simethicone emulsion, sorbic acid, propylene glycol, white petrolatum, polyoxyl 20- cetostearyl ether, methylparaben, propylparaben, noncrystallizing sorbitol solution and purified water.</Description>
</NDC>
<NDC>
<NDCCode>46708-624-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-624-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0624-15</NDC11Code>
<ProductNDC>46708-624</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mupirocin</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213053</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>MUPIROCIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mupirocin cream is indicated for the treatment of secondarily infected traumatic skin lesions (up to 10 cm in length or 100 cm2in area) due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>Mupirocin cream USP, 2% contains the dihydrate crystalline calcium hemi-salt of the RNA synthetase inhibitor antibacterial, mupirocin. Chemically, it is (αE,2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid, calcium salt (2:1), dihydrate. The molecular formula of mupirocin calcium is (C26H43O9)2Ca2H2O, and the molecular weight is 1075.3. The molecular weight of mupirocin free acid is 500.6. The structural formula of mupirocin calcium is:. Each gram of mupirocin cream USP, 2% contains 20 mg (2% w/w) of mupirocin equivalent to 21.5 mg (2.15% w/w) of mupirocin calcium, USP. The inactive ingredients are benzyl alcohol, glycerol monostearate, mineral oil, phenoxyethanol, polyoxyl 20 cetostearyl ether, purified water, and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>46708-632-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-632-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0632-15</NDC11Code>
<ProductNDC>46708-632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desonide</ProprietaryName>
<NonProprietaryName>Desonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214396</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desonide cream, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
<Description>Desonide cream, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, USP the active ingredient in desonide cream, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0.</Description>
</NDC>
<NDC>
<NDCCode>46708-661-15</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-661-15) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0661-15</NDC11Code>
<ProductNDC>46708-661</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate Ophthalmic Solution, 0.15%</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate Ophthalmic Solution, 0.15%</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215225</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution, 0.15% is an alpha adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.15%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In solution, brimonidine tartrate ophthalmic solution has a clear, greenish-yellow color. It has an osmolality of 250-350 mOsmol/kg and a pH of 6.6-7.4. Brimonidine tartrate appears as wheatish to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.15% (1.5 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>46708-706-15</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (46708-706-15) / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>46708-0706-15</NDC11Code>
<ProductNDC>46708-706</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate And Timolol Maleate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215230</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate and timolol maleate ophthalmic solution 0.2% /0.5% is an alpha-adrenergic receptor agonist with a beta-adrenergic receptor inhibitor indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP; the IOP-lowering of brimonidine tartrate and timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.</IndicationAndUsage>
<Description>Brimonidine tartrate and timolol maleate ophthalmic solution 0.2%/0.5%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist with a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent). The structural formulae are: Brimonidine tartrate. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. Timolol maleate. (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); MW= 432.50 as the maleate salt. In solution, brimonidine tartrate and timolol maleate ophthalmic solution 0.2% /0.5% has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as an off-white, or white to pale-yellow powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of brimonidine tartrate and timolol maleate ophthalmic solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% with the inactive ingredients benzalkonium chloride 0.005%; sodium phosphate, monobasic; sodium phosphate, dibasic; purified water; and hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>46708-749-15</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-749-15) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0749-15</NDC11Code>
<ProductNDC>46708-749</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216909</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution, 0.1% is an alpha adrenergic receptor agonist indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.1%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist (topical intraocular pressure lowering agent). The structural formula of brimonidine tartrate is. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. In solution, brimonidine tartrate ophthalmic solution has a clear, greenish-yellow color. It has an osmolality of 250-350 mOsmol/kg and a pH of 7.4-8.0. Brimonidine tartrate appears as wheatish to pale-yellow powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution contains the active ingredient brimonidine tartrate 0.1% (1.0 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>46708-770-15</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (46708-770-15) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0770-15</NDC11Code>
<ProductNDC>46708-770</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260302</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217278</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine orally disintegrating tablets are indicated for:Epilepsy - adjunctive therapy in patients aged 2 years and older: partial-onset seizures. primary generalized tonic-clonic (PGTC) seizures. generalized seizures of Lennox-Gastaut syndrome. (1.1). Epilepsy - monotherapy in patients aged 16 years and older: Conversion to monotherapy in patients with partial-onset seizures who are receiving treatment with carbamazepine, phenytoin, phenobarbital, primidone, or valproate as the single antiepileptic drug. (1.1)Bipolar disorder: Maintenance treatment of bipolar I disorder to delay the time to occurrence of mood episodes in patients treated for acute mood episodes with standard therapy. (1.2) Limitations of Use: Treatment of acute manic or mixed episodes is not recommended. Effectiveness of lamotrigine orally disintegrating tablets in the acute treatment of mood episodes has not been established.</IndicationAndUsage>
<Description>Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pKa of 5.7. Lamotrigine is slightly soluble in anhydrous ethanol and in 0.1M hydrochloric acid. The structural formula is. Lamotrigine orally disintegrating tablets, USP are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: amino methacrylate copolymer, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and sucralose. Composition of peppermint flavor: Maltodextrin, modified corn starch and natural flavours. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with amino methacrylate copolymer for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile.</Description>
</NDC>
<NDC>
<NDCCode>46708-771-15</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (46708-771-15) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0771-15</NDC11Code>
<ProductNDC>46708-771</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260302</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217278</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine orally disintegrating tablets are indicated for:Epilepsy - adjunctive therapy in patients aged 2 years and older: partial-onset seizures. primary generalized tonic-clonic (PGTC) seizures. generalized seizures of Lennox-Gastaut syndrome. (1.1). Epilepsy - monotherapy in patients aged 16 years and older: Conversion to monotherapy in patients with partial-onset seizures who are receiving treatment with carbamazepine, phenytoin, phenobarbital, primidone, or valproate as the single antiepileptic drug. (1.1)Bipolar disorder: Maintenance treatment of bipolar I disorder to delay the time to occurrence of mood episodes in patients treated for acute mood episodes with standard therapy. (1.2) Limitations of Use: Treatment of acute manic or mixed episodes is not recommended. Effectiveness of lamotrigine orally disintegrating tablets in the acute treatment of mood episodes has not been established.</IndicationAndUsage>
<Description>Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pKa of 5.7. Lamotrigine is slightly soluble in anhydrous ethanol and in 0.1M hydrochloric acid. The structural formula is. Lamotrigine orally disintegrating tablets, USP are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: amino methacrylate copolymer, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and sucralose. Composition of peppermint flavor: Maltodextrin, modified corn starch and natural flavours. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with amino methacrylate copolymer for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile.</Description>
</NDC>
<NDC>
<NDCCode>46708-077-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-077-30) </PackageDescription>
<NDC11Code>46708-0077-30</NDC11Code>
<ProductNDC>46708-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prucalopride</ProprietaryName>
<NonProprietaryName>Prucalopride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prucalopride tablet is indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
<Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to off-white powder. It is freely soluble in 0.1N HCl and soluble in N, N-Dimethyl formamide, sparingly soluble in methanol, practically insoluble in ethyl acetate. Each 1-mg film-coated prucalopride tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains hypromellose, polyethylene glycol 400 and titanium dioxide. Each 2-mg film-coated prucalopride tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains ferrosoferric oxide, hypromellose, iron oxide red, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-078-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-078-30) </PackageDescription>
<NDC11Code>46708-0078-30</NDC11Code>
<ProductNDC>46708-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prucalopride</ProprietaryName>
<NonProprietaryName>Prucalopride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prucalopride tablet is indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
<Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to off-white powder. It is freely soluble in 0.1N HCl and soluble in N, N-Dimethyl formamide, sparingly soluble in methanol, practically insoluble in ethyl acetate. Each 1-mg film-coated prucalopride tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains hypromellose, polyethylene glycol 400 and titanium dioxide. Each 2-mg film-coated prucalopride tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: cellulose powder, colloidal silicon dioxide, lactose monohydrate and magnesium stearate. The coating material contains ferrosoferric oxide, hypromellose, iron oxide red, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0143-9161-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9161-10) / 513 mg in 1 VIAL (0143-9161-01) </PackageDescription>
<NDC11Code>00143-9161-10</NDC11Code>
<ProductNDC>0143-9161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>513</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9161-25</NDCCode>
<PackageDescription>25 VIAL in 1 PACKAGE (0143-9161-25) / 513 mg in 1 VIAL (0143-9161-01) </PackageDescription>
<NDC11Code>00143-9161-25</NDC11Code>
<ProductNDC>0143-9161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>513</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9162-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9162-10) / 1025 mg in 1 VIAL (0143-9162-01) </PackageDescription>
<NDC11Code>00143-9162-10</NDC11Code>
<ProductNDC>0143-9162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1025</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9473-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9473-10) / 769 mg in 1 VIAL (0143-9473-01) </PackageDescription>
<NDC11Code>00143-9473-10</NDC11Code>
<ProductNDC>0143-9473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20250813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>769</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250813</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9474-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9474-10) / 1280 mg in 1 VIAL (0143-9474-01) </PackageDescription>
<NDC11Code>00143-9474-10</NDC11Code>
<ProductNDC>0143-9474</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20250813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1280</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250813</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
</NDCList>