{
"NDC": [
{
"NDCCode": "46708-505-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-505-03) / 3 mL in 1 BOTTLE",
"NDC11Code": "46708-0505-03",
"ProductNDC": "46708-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moxifloxacin Ophthalmic Solution",
"NonProprietaryName": "Moxifloxacin Ophthalmic Solution",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209469",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190213",
"SamplePackage": "N",
"IndicationAndUsage": "Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Moxifloxacin ophthalmic solution USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol[3,4 b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24FN3O4HCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below:. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of Moxifloxacin ophthalmic solution USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution USP contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, water for injection, and sodium chloride. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg."
},
{
"NDCCode": "46708-058-03",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (46708-058-03) / 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0058-03",
"ProductNDC": "46708-058",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211792",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2023-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200129",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin tablets are a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets, USP contain the active ingredient azithromycin, USP a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula:. Azithromycin as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.02. Azithromycin tablets, USP are supplied for oral administration as pink modified capsule shaped, film-coated tablets containing azithromycin dihydrate equivalent to 500 mg azithromycin, USP and the following inactive ingredients: anhydrous dibasic calcium phosphate, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, sodium lauryl sulfate, lactose monohydrate, hypromellose, titanium dioxide, triacetin and D&C Red #30 Aluminum Lake. FDA approved dissolution specification differs from the USP dissolution specification."
},
{
"NDCCode": "46708-182-03",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (46708-182-03) / 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "46708-0182-03",
"ProductNDC": "46708-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolmitriptan",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205074",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use : 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.",
"Description": "Zolmitriptan orally disintegrating tablets contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is freely soluble in N,N-dimethyl formamide, dimethyl sulfoxide and practically insoluble in water. Zolmitriptan orally disintegrating tablets are available as 2.5 mg and 5 mg white to off-white uncoated tablets. The orally disintegrating tablets contain mannitol, microcrystalline cellulose, crospovidone, aspartame [see Warnings and Precautions (5.9)], sodium stearyl fumarate, colloidal silicon dioxide, magnesium stearate, orange flavor, modified food starch and triacetin."
},
{
"NDCCode": "46708-184-10",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (46708-184-10) / 10 TABLET in 1 BLISTER PACK (46708-184-03) ",
"NDC11Code": "46708-0184-10",
"ProductNDC": "46708-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "40; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2."
},
{
"NDCCode": "46708-185-10",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (46708-185-10) / 10 TABLET in 1 BLISTER PACK (46708-185-03) ",
"NDC11Code": "46708-0185-10",
"ProductNDC": "46708-185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "40; 10",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2."
},
{
"NDCCode": "46708-186-10",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (46708-186-10) / 10 TABLET in 1 BLISTER PACK (46708-186-03) ",
"NDC11Code": "46708-0186-10",
"ProductNDC": "46708-186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "80; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2."
},
{
"NDCCode": "46708-187-10",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (46708-187-10) / 10 TABLET in 1 BLISTER PACK (46708-187-03) ",
"NDC11Code": "46708-0187-10",
"ProductNDC": "46708-187",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Amlodipine",
"NonProprietaryName": "Telmisartan And Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205234",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE",
"StrengthNumber": "80; 10",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.",
"Description": "Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2."
},
{
"NDCCode": "46708-463-03",
"PackageDescription": "3 TABLET, FILM COATED in 1 CARTON (46708-463-03) ",
"NDC11Code": "46708-0463-03",
"ProductNDC": "46708-463",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolmitriptan",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204232",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160104",
"SamplePackage": "N",
"IndicationAndUsage": "Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks. , 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.",
"Description": "Zolmitriptan tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5yl]methyl]-2-oxazolidinone and has the following chemical structure: The molecular formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is practically insoluble in water. Zolmitriptan tablets are available as 2.5 mg (yellow) and 5 mg (pink) film coated tablets for oral administration. The film coated tablets contain anhydrous lactose, microcrystalline cellulose, sodium starch glycolate, magnesium stearate. In addition, following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, polyethylene glycol 4000, yellow iron oxide (2.5 mg strength) and hypromellose, titanium dioxide, talc, polyethylene glycol 6000 and red iron oxide (5 mg strength)."
},
{
"NDCCode": "46708-511-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-511-03) / 3 mL in 1 BOTTLE",
"NDC11Code": "46708-0511-03",
"ProductNDC": "46708-511",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bimatoprost",
"NonProprietaryName": "Bimatoprost",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210515",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BIMATOPROST",
"StrengthNumber": ".3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2023-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230721",
"SamplePackage": "N",
"IndicationAndUsage": "Bimatoprost ophthalmic solution, 0.03% is indicated to treat hypotrichosis of the eyelashes by increasing their growth including length, thickness and darkness.",
"Description": "Bimatoprost ophthalmic solution, 0.03% is a synthetic prostaglandin analog. Its chemical name is (Z)-7-[(1R, 2R, 3R, 5S)-3, 5-Dihydroxy-2-[(1E, 3S)-3-hydroxy-5-phenyl-1pentenyl] cyclopentenyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is soluble in methanol and alcohol. Bimatoprost ophthalmic solution 0.03% is clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. Bimatoprost Ophthalmic Solution 0.03% contains: Active: bimatoprost 0.3 mg/mL; Preservative: benzalkonium chloride 0.05 mg/mL; Inactives: sodium chloride; sodium phosphate, dibasic; citric acid; and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf-life ranges from 6.8 to7.8."
},
{
"NDCCode": "46708-583-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-583-03) / 3 mL in 1 BOTTLE",
"NDC11Code": "46708-0583-03",
"ProductNDC": "46708-583",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bromfenac Sodium",
"NonProprietaryName": "Bromfenac Sodium",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214340",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "BROMFENAC SODIUM",
"StrengthNumber": ".805",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240708",
"SamplePackage": "N",
"IndicationAndUsage": "Bromfenac ophthalmic solution 0.07% is indicated for the treatment of postoperative inflammation and reduction of ocular pain in patients who have undergone cataract surgery.",
"Description": "Bromfenac ophthalmic solution 0.07% is a sterile, topical, nonsteroidal anti-inflammatory drug (NSAID) for ophthalmic use. Each mL of bromfenac ophthalmic solution contains 0.805 mg bromfenac sodium sesquihydrate (equivalent to 0.7 mg bromfenac free acid). The USAN name for bromfenac sodium sesquihydrate is bromfenac sodium. Bromfenac sodium is designated chemically as sodium-2-amino-3(4-bromobenzoyl)-phenylacetate sesquihydrate, with an empirical formula of C15H11BrNNaO3 . 1.5 H2O. The chemical structure for bromfenac sodium sesquihydrate is. Bromfenac sodium is a bright orange to yellow powder. The molecular weight of bromfenac sodium is 383.17. Bromfenac ophthalmic solution is supplied as a sterile aqueous 0.07% solution, with a pH of 7.8. The osmolality of Bromfenac ophthalmic solution is approximately 300 mOsmol/kg.Each mL of bromfenac ophthalmic solution contains:Active: Each mL contains bromfenac sodium sesquihydrate 0.0805%, which is equivalent to bromfenac free acid 0.07%.Preservative: benzalkonium chloride 0.005%Inactives: boric acid, edetate disodium, povidone, sodium borate, sodium sulfite, tyloxapol, sodium hydroxide to adjust pH and water for injection, USP."
},
{
"NDCCode": "46708-654-03",
"PackageDescription": "1 SYRINGE, GLASS in 1 CARTON (46708-654-03) / 3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "46708-0654-03",
"ProductNDC": "46708-654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Icatibant",
"NonProprietaryName": "Icatibant",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213773",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ICATIBANT ACETATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Bradykinin B2 Receptor Antagonist [EPC], Bradykinin B2 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240614",
"SamplePackage": "N",
"IndicationAndUsage": "Icatibant injection is indicated for the treatment of acute attacks of hereditary angioedema (HAE) in adults 18 years of age and older.",
"Description": "Icatibant injection (icatibant) is a synthetic decapeptide with five non-proteinogenic amino acids. The chemical structure of icatibant acetate is presented in Figure 1. Figure 1 Chemical Structure. Chemical name: D-Arginyl-L-arginyl-L-prolyl-L[(4R)-4-hydroxyprolyl]-glycyl-L[3-(2-thienyl)alanyl]-Lseryl-D-(1,2,3,4-tetrahydroisoquinolin-3-ylcarbonyl)-L[(3aS,7aS) octahydroindol-2-ylcarbonyl]-L arginine, acetate salt. Icatibant injection is provided as a sterile, isotonic, and buffered solution of icatibant acetate in a single-dose, prefilled syringe for subcutaneous administration. Each mL of the solution contains 10 mg of icatibant (free base) which is equivalent to 11.38 mg of icatibant acetate. Each prefilled syringe delivers 3 mL of solution equivalent to a 30 mg icatibant dose. The solution is clear and colorless. The solution also contains sodium chloride (isotonicity reagent), glacial acetic acid (buffering agent), sodium hydroxide (pH adjuster) and water for injection with a pH of approximately 5.5. The solution does not contain preservatives. Pharmacological class: Icatibant is a bradykinin B2 receptor antagonist."
},
{
"NDCCode": "46708-659-02",
"PackageDescription": "1 KIT in 1 CARTON (46708-659-02) * 30 mL in 1 VIAL, SINGLE-DOSE (46708-658-31) * 3 mL in 1 VIAL (46708-660-03) ",
"NDC11Code": "46708-0659-02",
"ProductNDC": "46708-659",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carmustine",
"NonProprietaryName": "Carmustine",
"DosageFormName": "KIT",
"StartMarketingDate": "20231020",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215730",
"LabelerName": "Alembic Pharmaceuticals Limited",
"Status": "Active",
"LastUpdate": "2023-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231020",
"SamplePackage": "N",
"IndicationAndUsage": "Carmustine for injection is indicated as palliative therapy as a single agent or in established combination therapy in the following: - Brain tumors glioblastoma, brainstem glioma, medulloblastoma, astrocytoma, ependymoma, and metastatic brain tumors. - Multiple myeloma in combination with prednisone. - Relapsed or refractory Hodgkin's lymphoma in combination with other approved drugs. - Relapsed or refractory Non-Hodgkin's lymphomas in combination with other approved drugs.",
"Description": "The active ingredient in carmustine for injection, USP is a nitrosourea with the chemical name 1,3-bis(2-chloroethyl)-1-nitrosourea and a molecular weight of 214.06. The drug product is supplied as sterile lyophilized pale yellow flakes or a congealed mass, and it is highly soluble in alcohol and lipids, and poorly soluble in water. Carmustine for injection, USP is administered by intravenous infusion after reconstitution, as recommended. The structural formula of carmustine is. Carmustine for injection, USP is available in 100-mg single dose vials of lyophilized material. Sterile diluent for constitution of carmustine for injection, USP is co-packaged with the active drug product for use in constitution of the lyophile. The diluent is supplied in a vial containing 3 mL of Dehydrated Alcohol Injection, USP."
},
{
"NDCCode": "46708-682-03",
"PackageDescription": "1 BOTTLE, PUMP in 1 PACKAGE (46708-682-03) / 2 g in 1 BOTTLE, PUMP",
"NDC11Code": "46708-0682-03",
"ProductNDC": "46708-682",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Docosanol",
"NonProprietaryName": "Docosanol",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215839",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DOCOSANOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2025-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250508",
"SamplePackage": "N",
"IndicationAndUsage": "treats cold sores/fever blisters on the face or lips. shortens healing time and duration of symptoms:."
},
{
"NDCCode": "46708-710-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (46708-710-03) / 2.5 mL in 1 BOTTLE",
"NDC11Code": "46708-0710-03",
"ProductNDC": "46708-710",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209420",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210125",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander."
},
{
"NDCCode": "62332-505-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (62332-505-03) / 3 mL in 1 BOTTLE",
"NDC11Code": "62332-0505-03",
"ProductNDC": "62332-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moxifloxacin Ophthalmic Solution",
"NonProprietaryName": "Moxifloxacin Ophthalmic Solution",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209469",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190213",
"SamplePackage": "N",
"IndicationAndUsage": "Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Moxifloxacin ophthalmic solution USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1- Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)octahydro-6H-pyrrolol[3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24F3N4OHCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of Moxifloxacin ophthalmic solution USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution USP contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, water for injection, and sodium chloride. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg."
},
{
"NDCCode": "62980-505-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (62980-505-03) ",
"NDC11Code": "62980-0505-03",
"ProductNDC": "62980-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"ProprietaryNameSuffix": "10mg",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL; ORAL; ORAL; ORAL; ORAL; ORAL; ORAL",
"StartMarketingDate": "20150701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090551",
"LabelerName": "Vivimed Labs Limited",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20150701",
"SamplePackage": "N"
},
{
"NDCCode": "63545-505-03",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (63545-505-03) ",
"NDC11Code": "63545-0505-03",
"ProductNDC": "63545-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Blatta Orientalis",
"NonProprietaryName": "Blatta Orientalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220503",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "BLATTA ORIENTALIS",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2022-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220503",
"SamplePackage": "N"
},
{
"NDCCode": "68428-505-03",
"PackageDescription": "75 PELLET in 1 VIAL, GLASS (68428-505-03) ",
"NDC11Code": "68428-0505-03",
"ProductNDC": "68428-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Iodatus Flavus",
"NonProprietaryName": "Mercurous Iodide",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "MERCUROUS IODIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "70261-505-03",
"PackageDescription": "3.5 mL in 1 BOTTLE, DROPPER (70261-505-03) ",
"NDC11Code": "70261-0505-03",
"ProductNDC": "70261-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pred-brom",
"NonProprietaryName": "Prednisolone Acetate-bromfenac",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20180201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "ImprimisRx NJ",
"SubstanceName": "BROMFENAC; PREDNISOLONE ACETATE",
"StrengthNumber": ".75; 10",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180201",
"SamplePackage": "N"
},
{
"NDCCode": "71288-505-03",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (71288-505-03) / 2 mL in 1 VIAL, SINGLE-DOSE (71288-505-02) ",
"NDC11Code": "71288-0505-03",
"ProductNDC": "71288-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204843",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190118",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine Injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).",
"Description": "Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "71384-505-03",
"PackageDescription": "20 BOTTLE, DROPPER in 1 BOX (71384-505-03) > 3.5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "71384-0505-03",
"ProductNDC": "71384-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pred-brom",
"NonProprietaryName": "Prednisolone Acetate-bromfenac",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20180105",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Imprimis NJOF, LLC",
"SubstanceName": "PREDNISOLONE ACETATE; BROMFENAC SODIUM",
"StrengthNumber": "10; .75",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA],Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180105",
"SamplePackage": "N"
},
{
"NDCCode": "72133-505-03",
"PackageDescription": "100 g in 1 JAR (72133-505-03) ",
"NDC11Code": "72133-0505-03",
"ProductNDC": "72133-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Personal Care",
"ProprietaryNameSuffix": "Pure",
"NonProprietaryName": "White Petrolatum",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180409",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Delta Brands & Products LLC",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180409",
"SamplePackage": "N",
"IndicationAndUsage": "■ petroleum jelly restores smooth and healthy skin ■ helps to soothe dry, chapped, cracked or irritated skin and lips due to cold and wind ■ for the temporary protection of minor cuts, scrapes, burns and sunburn ■ helps to treat and prevent diaper rash."
},
{
"NDCCode": "73076-505-03",
"PackageDescription": "100 g in 1 JAR (73076-505-03) ",
"NDC11Code": "73076-0505-03",
"ProductNDC": "73076-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lmnoop Balanitis Treatment Cream",
"NonProprietaryName": "Lmnoop Balanitis Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Shenzhen Ishan Technology Co., Ltd",
"SubstanceName": "OATMEAL",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Grain Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Wash and dry affected area. Apply a small amount to the affected area 1 to 2 times daily (morning and night), or as directed by a doctor. Wash hands after each use."
},
{
"NDCCode": "75109-505-03",
"PackageDescription": "25 POUCH in 1 PACKAGE (75109-505-03) > 135 g in 1 POUCH",
"NDC11Code": "75109-0505-03",
"ProductNDC": "75109-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial Wipes",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200621",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Kangna (Zhejiang) Medical Supplies Co., Ltd.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".3",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200621",
"SamplePackage": "N"
},
{
"NDCCode": "75791-505-03",
"PackageDescription": "208198 mL in 1 BOTTLE, PLASTIC (75791-505-03) ",
"NDC11Code": "75791-0505-03",
"ProductNDC": "75791-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Aurum Sierra Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "80",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "75936-505-04",
"PackageDescription": "1 TUBE in 1 BOX (75936-505-04) > 210 mL in 1 TUBE (75936-505-03) ",
"NDC11Code": "75936-0505-04",
"ProductNDC": "75936-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Super Power Sunscreen Mousse Spf 50",
"ProprietaryNameSuffix": "Supergoop",
"NonProprietaryName": "Avobenzone, Homosalate, Octinoxate, Octisalate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170113",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "TAYLOR JAMES, LTD.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "3; 10; 7.5; 5",
"StrengthUnit": "kg/100mL; kg/100mL; kg/100mL; kg/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170113",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "76339-505-03",
"PackageDescription": "1 BAG in 1 DRUM (76339-505-03) / 1 BAG in 1 BAG / 19.999 kg in 1 BAG",
"NDC11Code": "76339-0505-03",
"ProductNDC": "76339-505",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Salcaprozate Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20231128",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Apothecon Pharmaceuticals Pvt Ltd",
"SubstanceName": "SALCAPROZATE SODIUM",
"StrengthNumber": "24.999",
"StrengthUnit": "kg/24.999kg",
"Status": "Unfinished",
"LastUpdate": "2025-11-10",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "28-NOV-23"
},
{
"NDCCode": "84522-505-03",
"PackageDescription": "30 g in 1 BOX (84522-505-03) ",
"NDC11Code": "84522-0505-03",
"ProductNDC": "84522-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Infinite Aloe",
"NonProprietaryName": "Infinite Aloe",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241213",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241213",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84549-505-03",
"PackageDescription": "2 mL in 1 VIAL, SINGLE-DOSE (84549-505-03) ",
"NDC11Code": "84549-0505-03",
"ProductNDC": "84549-505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204843",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251010",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine Injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. ( 1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. ( 1.2) .",
"Description": "Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "84756-505-03",
"PackageDescription": "30 g in 1 BOX (84756-505-03) ",
"NDC11Code": "84756-0505-03",
"ProductNDC": "84756-505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pearl Cream",
"NonProprietaryName": "Pearl Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241127",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Luoxin E �Commerce Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241127",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-505-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-505-03) / 3 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0505-03</NDC11Code>
<ProductNDC>46708-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moxifloxacin Ophthalmic Solution</ProprietaryName>
<NonProprietaryName>Moxifloxacin Ophthalmic Solution</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209469</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Moxifloxacin ophthalmic solution USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol[3,4 b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24FN3O4HCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below:. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of Moxifloxacin ophthalmic solution USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution USP contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, water for injection, and sodium chloride. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>46708-058-03</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (46708-058-03) / 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0058-03</NDC11Code>
<ProductNDC>46708-058</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211792</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin tablets are a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets, USP contain the active ingredient azithromycin, USP a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula:. Azithromycin as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.02. Azithromycin tablets, USP are supplied for oral administration as pink modified capsule shaped, film-coated tablets containing azithromycin dihydrate equivalent to 500 mg azithromycin, USP and the following inactive ingredients: anhydrous dibasic calcium phosphate, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, sodium lauryl sulfate, lactose monohydrate, hypromellose, titanium dioxide, triacetin and D&C Red #30 Aluminum Lake. FDA approved dissolution specification differs from the USP dissolution specification.</Description>
</NDC>
<NDC>
<NDCCode>46708-182-03</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (46708-182-03) / 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0182-03</NDC11Code>
<ProductNDC>46708-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolmitriptan</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205074</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use : 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.</IndicationAndUsage>
<Description>Zolmitriptan orally disintegrating tablets contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is freely soluble in N,N-dimethyl formamide, dimethyl sulfoxide and practically insoluble in water. Zolmitriptan orally disintegrating tablets are available as 2.5 mg and 5 mg white to off-white uncoated tablets. The orally disintegrating tablets contain mannitol, microcrystalline cellulose, crospovidone, aspartame [see Warnings and Precautions (5.9)], sodium stearyl fumarate, colloidal silicon dioxide, magnesium stearate, orange flavor, modified food starch and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>46708-184-10</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (46708-184-10) / 10 TABLET in 1 BLISTER PACK (46708-184-03) </PackageDescription>
<NDC11Code>46708-0184-10</NDC11Code>
<ProductNDC>46708-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>40; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-185-10</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (46708-185-10) / 10 TABLET in 1 BLISTER PACK (46708-185-03) </PackageDescription>
<NDC11Code>46708-0185-10</NDC11Code>
<ProductNDC>46708-185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>40; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-186-10</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (46708-186-10) / 10 TABLET in 1 BLISTER PACK (46708-186-03) </PackageDescription>
<NDC11Code>46708-0186-10</NDC11Code>
<ProductNDC>46708-186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>80; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-187-10</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (46708-187-10) / 10 TABLET in 1 BLISTER PACK (46708-187-03) </PackageDescription>
<NDC11Code>46708-0187-10</NDC11Code>
<ProductNDC>46708-187</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Amlodipine</ProprietaryName>
<NonProprietaryName>Telmisartan And Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205234</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>80; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and amlodipine tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers and dihydropyridine calcium channel blockers. There are no controlled trials demonstrating risk reduction with telmisartan and amlodipine tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Telmisartan and amlodipine tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. Base the choice of telmisartan and amlodipine tablets as initial therapy for hypertension on an assessment of potential benefits and risks including whether the patient is likely to tolerate the starting dose of telmisartan and amlodipine tablets. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient’s baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy when deciding whether to use telmisartan and amlodipine tablets as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from an 8-week, placebo-controlled, multidose, factorial trial provide estimates of the probability of reaching a blood pressure goal with telmisartan and amlodipine tablets compared to telmisartan or amlodipine monotherapy and placebo [see Clinical Studies (14.1)]. The figures below provide estimates of the likelihood of achieving systolic and diastolic blood pressure control with telmisartan and amlodipine 80/10 mg tablets, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. The figures above provide an approximation of the likelihood of reaching a targeted blood pressure goal at 8 weeks. For example, a patient with a baseline blood pressure of 160/110 mmHg has about a 16% likelihood of achieving a goal of <140 mmHg (systolic) and 16% likelihood of achieving <90 mmHg (diastolic) on placebo. The likelihood of achieving these same goals on telmisartan is about 46% (systolic) and 26% (diastolic). The likelihood of achieving these same goals on amlodipine is about 69% (systolic) and 22% (diastolic). These likelihoods rise to 79% for systolic and 55% for diastolic with telmisartan and amlodipine tablets.</IndicationAndUsage>
<Description>Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets, USP contain telmisartan, USP a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan, USP is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2 and its structural formula is. Telmisartan and amlodipine tablets, USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate, USP’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S and its structural formula is. Telmisartan and amlodipine tablets, USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets, USP also contain the following inactive ingredients: black iron oxide, corn starch, crospovidone, FD&C blue #1-Alumium lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide and sodium stearyl fumarate. Telmisartan and amlodipine tablets, USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets, USP require protection from light. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>46708-463-03</NDCCode>
<PackageDescription>3 TABLET, FILM COATED in 1 CARTON (46708-463-03) </PackageDescription>
<NDC11Code>46708-0463-03</NDC11Code>
<ProductNDC>46708-463</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolmitriptan</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204232</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zolmitriptan is indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: 1 Only use zolmitriptan if a clear diagnosis of migraine has been established. If a patient has no response to zolmitriptan treatment for the first migraine attack, reconsider the diagnosis of migraine before zolmitriptan is administered to treat any subsequent attacks. , 2 Zolmitriptan is not indicated for the prevention of migraine attacks. , 3 Safety and effectiveness of zolmitriptan have not been established for cluster headache.</IndicationAndUsage>
<Description>Zolmitriptan tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5yl]methyl]-2-oxazolidinone and has the following chemical structure: The molecular formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to off-white crystalline powder that is practically insoluble in water. Zolmitriptan tablets are available as 2.5 mg (yellow) and 5 mg (pink) film coated tablets for oral administration. The film coated tablets contain anhydrous lactose, microcrystalline cellulose, sodium starch glycolate, magnesium stearate. In addition, following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, polyethylene glycol 4000, yellow iron oxide (2.5 mg strength) and hypromellose, titanium dioxide, talc, polyethylene glycol 6000 and red iron oxide (5 mg strength).</Description>
</NDC>
<NDC>
<NDCCode>46708-511-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-511-03) / 3 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0511-03</NDC11Code>
<ProductNDC>46708-511</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bimatoprost</ProprietaryName>
<NonProprietaryName>Bimatoprost</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210515</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BIMATOPROST</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bimatoprost ophthalmic solution, 0.03% is indicated to treat hypotrichosis of the eyelashes by increasing their growth including length, thickness and darkness.</IndicationAndUsage>
<Description>Bimatoprost ophthalmic solution, 0.03% is a synthetic prostaglandin analog. Its chemical name is (Z)-7-[(1R, 2R, 3R, 5S)-3, 5-Dihydroxy-2-[(1E, 3S)-3-hydroxy-5-phenyl-1pentenyl] cyclopentenyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, which is soluble in methanol and alcohol. Bimatoprost ophthalmic solution 0.03% is clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. Bimatoprost Ophthalmic Solution 0.03% contains: Active: bimatoprost 0.3 mg/mL; Preservative: benzalkonium chloride 0.05 mg/mL; Inactives: sodium chloride; sodium phosphate, dibasic; citric acid; and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf-life ranges from 6.8 to7.8.</Description>
</NDC>
<NDC>
<NDCCode>46708-583-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-583-03) / 3 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0583-03</NDC11Code>
<ProductNDC>46708-583</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bromfenac Sodium</ProprietaryName>
<NonProprietaryName>Bromfenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214340</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>BROMFENAC SODIUM</SubstanceName>
<StrengthNumber>.805</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bromfenac ophthalmic solution 0.07% is indicated for the treatment of postoperative inflammation and reduction of ocular pain in patients who have undergone cataract surgery.</IndicationAndUsage>
<Description>Bromfenac ophthalmic solution 0.07% is a sterile, topical, nonsteroidal anti-inflammatory drug (NSAID) for ophthalmic use. Each mL of bromfenac ophthalmic solution contains 0.805 mg bromfenac sodium sesquihydrate (equivalent to 0.7 mg bromfenac free acid). The USAN name for bromfenac sodium sesquihydrate is bromfenac sodium. Bromfenac sodium is designated chemically as sodium-2-amino-3(4-bromobenzoyl)-phenylacetate sesquihydrate, with an empirical formula of C15H11BrNNaO3 . 1.5 H2O. The chemical structure for bromfenac sodium sesquihydrate is. Bromfenac sodium is a bright orange to yellow powder. The molecular weight of bromfenac sodium is 383.17. Bromfenac ophthalmic solution is supplied as a sterile aqueous 0.07% solution, with a pH of 7.8. The osmolality of Bromfenac ophthalmic solution is approximately 300 mOsmol/kg.Each mL of bromfenac ophthalmic solution contains:Active: Each mL contains bromfenac sodium sesquihydrate 0.0805%, which is equivalent to bromfenac free acid 0.07%.Preservative: benzalkonium chloride 0.005%Inactives: boric acid, edetate disodium, povidone, sodium borate, sodium sulfite, tyloxapol, sodium hydroxide to adjust pH and water for injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>46708-654-03</NDCCode>
<PackageDescription>1 SYRINGE, GLASS in 1 CARTON (46708-654-03) / 3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>46708-0654-03</NDC11Code>
<ProductNDC>46708-654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Icatibant</ProprietaryName>
<NonProprietaryName>Icatibant</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213773</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ICATIBANT ACETATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Bradykinin B2 Receptor Antagonist [EPC], Bradykinin B2 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Icatibant injection is indicated for the treatment of acute attacks of hereditary angioedema (HAE) in adults 18 years of age and older.</IndicationAndUsage>
<Description>Icatibant injection (icatibant) is a synthetic decapeptide with five non-proteinogenic amino acids. The chemical structure of icatibant acetate is presented in Figure 1. Figure 1 Chemical Structure. Chemical name: D-Arginyl-L-arginyl-L-prolyl-L[(4R)-4-hydroxyprolyl]-glycyl-L[3-(2-thienyl)alanyl]-Lseryl-D-(1,2,3,4-tetrahydroisoquinolin-3-ylcarbonyl)-L[(3aS,7aS) octahydroindol-2-ylcarbonyl]-L arginine, acetate salt. Icatibant injection is provided as a sterile, isotonic, and buffered solution of icatibant acetate in a single-dose, prefilled syringe for subcutaneous administration. Each mL of the solution contains 10 mg of icatibant (free base) which is equivalent to 11.38 mg of icatibant acetate. Each prefilled syringe delivers 3 mL of solution equivalent to a 30 mg icatibant dose. The solution is clear and colorless. The solution also contains sodium chloride (isotonicity reagent), glacial acetic acid (buffering agent), sodium hydroxide (pH adjuster) and water for injection with a pH of approximately 5.5. The solution does not contain preservatives. Pharmacological class: Icatibant is a bradykinin B2 receptor antagonist.</Description>
</NDC>
<NDC>
<NDCCode>46708-659-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (46708-659-02) * 30 mL in 1 VIAL, SINGLE-DOSE (46708-658-31) * 3 mL in 1 VIAL (46708-660-03) </PackageDescription>
<NDC11Code>46708-0659-02</NDC11Code>
<ProductNDC>46708-659</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carmustine</ProprietaryName>
<NonProprietaryName>Carmustine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231020</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215730</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carmustine for injection is indicated as palliative therapy as a single agent or in established combination therapy in the following: - Brain tumors glioblastoma, brainstem glioma, medulloblastoma, astrocytoma, ependymoma, and metastatic brain tumors. - Multiple myeloma in combination with prednisone. - Relapsed or refractory Hodgkin's lymphoma in combination with other approved drugs. - Relapsed or refractory Non-Hodgkin's lymphomas in combination with other approved drugs.</IndicationAndUsage>
<Description>The active ingredient in carmustine for injection, USP is a nitrosourea with the chemical name 1,3-bis(2-chloroethyl)-1-nitrosourea and a molecular weight of 214.06. The drug product is supplied as sterile lyophilized pale yellow flakes or a congealed mass, and it is highly soluble in alcohol and lipids, and poorly soluble in water. Carmustine for injection, USP is administered by intravenous infusion after reconstitution, as recommended. The structural formula of carmustine is. Carmustine for injection, USP is available in 100-mg single dose vials of lyophilized material. Sterile diluent for constitution of carmustine for injection, USP is co-packaged with the active drug product for use in constitution of the lyophile. The diluent is supplied in a vial containing 3 mL of Dehydrated Alcohol Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>46708-682-03</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 PACKAGE (46708-682-03) / 2 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>46708-0682-03</NDC11Code>
<ProductNDC>46708-682</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Docosanol</ProprietaryName>
<NonProprietaryName>Docosanol</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215839</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DOCOSANOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats cold sores/fever blisters on the face or lips. shortens healing time and duration of symptoms:.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>46708-710-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46708-710-03) / 2.5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>46708-0710-03</NDC11Code>
<ProductNDC>46708-710</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209420</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62332-505-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62332-505-03) / 3 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>62332-0505-03</NDC11Code>
<ProductNDC>62332-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moxifloxacin Ophthalmic Solution</ProprietaryName>
<NonProprietaryName>Moxifloxacin Ophthalmic Solution</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209469</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms:Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis*Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Moxifloxacin ophthalmic solution USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. The chemical name for moxifloxacin hydrochloride is 1- Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)octahydro-6H-pyrrolol[3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride is C21H24F3N4OHCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of Moxifloxacin ophthalmic solution USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution USP contains Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, water for injection, and sodium chloride. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>62980-505-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (62980-505-03) </PackageDescription>
<NDC11Code>62980-0505-03</NDC11Code>
<ProductNDC>62980-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>10mg</ProprietaryNameSuffix>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL; ORAL; ORAL; ORAL; ORAL; ORAL; ORAL</RouteName>
<StartMarketingDate>20150701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090551</ApplicationNumber>
<LabelerName>Vivimed Labs Limited</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63545-505-03</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (63545-505-03) </PackageDescription>
<NDC11Code>63545-0505-03</NDC11Code>
<ProductNDC>63545-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Blatta Orientalis</ProprietaryName>
<NonProprietaryName>Blatta Orientalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220503</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>BLATTA ORIENTALIS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68428-505-03</NDCCode>
<PackageDescription>75 PELLET in 1 VIAL, GLASS (68428-505-03) </PackageDescription>
<NDC11Code>68428-0505-03</NDC11Code>
<ProductNDC>68428-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Iodatus Flavus</ProprietaryName>
<NonProprietaryName>Mercurous Iodide</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>MERCUROUS IODIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70261-505-03</NDCCode>
<PackageDescription>3.5 mL in 1 BOTTLE, DROPPER (70261-505-03) </PackageDescription>
<NDC11Code>70261-0505-03</NDC11Code>
<ProductNDC>70261-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pred-brom</ProprietaryName>
<NonProprietaryName>Prednisolone Acetate-bromfenac</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20180201</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>ImprimisRx NJ</LabelerName>
<SubstanceName>BROMFENAC; PREDNISOLONE ACETATE</SubstanceName>
<StrengthNumber>.75; 10</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-505-03</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-505-03) / 2 mL in 1 VIAL, SINGLE-DOSE (71288-505-02) </PackageDescription>
<NDC11Code>71288-0505-03</NDC11Code>
<ProductNDC>71288-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204843</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine Injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>71384-505-03</NDCCode>
<PackageDescription>20 BOTTLE, DROPPER in 1 BOX (71384-505-03) > 3.5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>71384-0505-03</NDC11Code>
<ProductNDC>71384-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pred-brom</ProprietaryName>
<NonProprietaryName>Prednisolone Acetate-bromfenac</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20180105</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Imprimis NJOF, LLC</LabelerName>
<SubstanceName>PREDNISOLONE ACETATE; BROMFENAC SODIUM</SubstanceName>
<StrengthNumber>10; .75</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA],Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72133-505-03</NDCCode>
<PackageDescription>100 g in 1 JAR (72133-505-03) </PackageDescription>
<NDC11Code>72133-0505-03</NDC11Code>
<ProductNDC>72133-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Personal Care</ProprietaryName>
<ProprietaryNameSuffix>Pure</ProprietaryNameSuffix>
<NonProprietaryName>White Petrolatum</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180409</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Delta Brands & Products LLC</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■ petroleum jelly restores smooth and healthy skin ■ helps to soothe dry, chapped, cracked or irritated skin and lips due to cold and wind ■ for the temporary protection of minor cuts, scrapes, burns and sunburn ■ helps to treat and prevent diaper rash.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73076-505-03</NDCCode>
<PackageDescription>100 g in 1 JAR (73076-505-03) </PackageDescription>
<NDC11Code>73076-0505-03</NDC11Code>
<ProductNDC>73076-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lmnoop Balanitis Treatment Cream</ProprietaryName>
<NonProprietaryName>Lmnoop Balanitis Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Shenzhen Ishan Technology Co., Ltd</LabelerName>
<SubstanceName>OATMEAL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Grain Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Wash and dry affected area. Apply a small amount to the affected area 1 to 2 times daily (morning and night), or as directed by a doctor. Wash hands after each use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>75109-505-03</NDCCode>
<PackageDescription>25 POUCH in 1 PACKAGE (75109-505-03) > 135 g in 1 POUCH</PackageDescription>
<NDC11Code>75109-0505-03</NDC11Code>
<ProductNDC>75109-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial Wipes</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200621</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Kangna (Zhejiang) Medical Supplies Co., Ltd.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>75791-505-03</NDCCode>
<PackageDescription>208198 mL in 1 BOTTLE, PLASTIC (75791-505-03) </PackageDescription>
<NDC11Code>75791-0505-03</NDC11Code>
<ProductNDC>75791-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Aurum Sierra Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>75936-505-04</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (75936-505-04) > 210 mL in 1 TUBE (75936-505-03) </PackageDescription>
<NDC11Code>75936-0505-04</NDC11Code>
<ProductNDC>75936-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Super Power Sunscreen Mousse Spf 50</ProprietaryName>
<ProprietaryNameSuffix>Supergoop</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170113</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>TAYLOR JAMES, LTD.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>3; 10; 7.5; 5</StrengthNumber>
<StrengthUnit>kg/100mL; kg/100mL; kg/100mL; kg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>76339-505-03</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (76339-505-03) / 1 BAG in 1 BAG / 19.999 kg in 1 BAG</PackageDescription>
<NDC11Code>76339-0505-03</NDC11Code>
<ProductNDC>76339-505</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Salcaprozate Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20231128</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Apothecon Pharmaceuticals Pvt Ltd</LabelerName>
<SubstanceName>SALCAPROZATE SODIUM</SubstanceName>
<StrengthNumber>24.999</StrengthNumber>
<StrengthUnit>kg/24.999kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-10</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-NOV-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>84522-505-03</NDCCode>
<PackageDescription>30 g in 1 BOX (84522-505-03) </PackageDescription>
<NDC11Code>84522-0505-03</NDC11Code>
<ProductNDC>84522-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Infinite Aloe</ProprietaryName>
<NonProprietaryName>Infinite Aloe</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241213</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84549-505-03</NDCCode>
<PackageDescription>2 mL in 1 VIAL, SINGLE-DOSE (84549-505-03) </PackageDescription>
<NDC11Code>84549-0505-03</NDC11Code>
<ProductNDC>84549-505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204843</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine Injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. ( 1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. ( 1.2) .</IndicationAndUsage>
<Description>Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>84756-505-03</NDCCode>
<PackageDescription>30 g in 1 BOX (84756-505-03) </PackageDescription>
<NDC11Code>84756-0505-03</NDC11Code>
<ProductNDC>84756-505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pearl Cream</ProprietaryName>
<NonProprietaryName>Pearl Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241127</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Luoxin E �Commerce Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
</NDCList>