{
"NDC": [
{
"NDCCode": "46708-808-00",
"PackageDescription": "1 TUBE in 1 CARTON (46708-808-00) / 45 g in 1 TUBE",
"NDC11Code": "46708-0808-00",
"ProductNDC": "46708-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214590",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260611",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure."
},
{
"NDCCode": "46708-808-20",
"PackageDescription": "1 TUBE in 1 CARTON (46708-808-20) / 20 g in 1 TUBE",
"NDC11Code": "46708-0808-20",
"ProductNDC": "46708-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214590",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260611",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure."
},
{
"NDCCode": "61303-808-00",
"PackageDescription": "25 kg in 1 BOX (61303-808-00) ",
"NDC11Code": "61303-0808-00",
"ProductNDC": "61303-808",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cefalexin Monohydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20071201",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CENTRIENT PHARMACEUTICALS SPAIN S.A.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "25",
"StrengthUnit": "kg/25kg",
"Status": "Unfinished",
"LastUpdate": "2021-04-09",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "01-DEC-07"
},
{
"NDCCode": "68479-808-00",
"PackageDescription": "2 mL in 1 POUCH (68479-808-00)",
"NDC11Code": "68479-0808-00",
"ProductNDC": "68479-808",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Oil Control",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20031204",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part358H",
"LabelerName": "Dermalogica, Inc.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "For the treatment of acne."
},
{
"NDCCode": "81234-808-00",
"PackageDescription": "1 BOTTLE, PUMP in 1 BOX (81234-808-00) / 15 mL in 1 BOTTLE, PUMP",
"NDC11Code": "81234-0808-00",
"ProductNDC": "81234-808",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lumin Broad Spectrum Moisturizer With Spf 30 Pa Uva/uvb Protection Sunscreen",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220101",
"EndMarketingDate": "20250105",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Pangaea Holdings Inc.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220101",
"EndMarketingDatePackage": "20250105",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "42283-023-00",
"PackageDescription": "50 LIQUID in 1 BOTTLE (42283-023-00)",
"NDC11Code": "42283-0023-00",
"ProductNDC": "42283-023",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lactovit Deo Roll On Lactourea Deodorant Antiperspirant",
"NonProprietaryName": "Aluminum Chlorohydrate, Aluminum Sesquichlorohydrate",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161119",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Laboratorios Genesse SL",
"SubstanceName": "ALUMINUM CHLOROHYDRATE; ALUMINUM SESQUICHLOROHYDRATE",
"StrengthNumber": "6.4; .808",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-12-28",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-0353-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-0353-0) / 10 mL in 1 VIAL",
"NDC11Code": "50090-0353-00",
"ProductNDC": "50090-0353",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190430",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "50090-1375-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-1375-0) / 10 mL in 1 VIAL",
"NDC11Code": "50090-1375-00",
"ProductNDC": "50090-1375",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "50090-1663-0",
"PackageDescription": "5 SYRINGE in 1 CARTON (50090-1663-0) / 3 mL in 1 SYRINGE",
"NDC11Code": "50090-1663-00",
"ProductNDC": "50090-1663",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20070906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150123",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "50090-4073-0",
"PackageDescription": "5 SYRINGE in 1 CARTON (50090-4073-0) / 3 mL in 1 SYRINGE",
"NDC11Code": "50090-4073-00",
"ProductNDC": "50090-4073",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20070906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2024-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190121",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "50090-4488-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-4488-0) / 10 mL in 1 VIAL",
"NDC11Code": "50090-4488-00",
"ProductNDC": "50090-4488",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2024-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "50090-5391-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-5391-0) / 10 mL in 1 VIAL",
"NDC11Code": "50090-5391-00",
"ProductNDC": "50090-5391",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201124",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "70518-3936-0",
"PackageDescription": "1 VIAL in 1 CARTON (70518-3936-0) / 10 mL in 1 VIAL",
"NDC11Code": "70518-3936-00",
"ProductNDC": "70518-3936",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20231206",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2025-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231206",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C 257H 383N 65O 77S 6and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "46708-582-04",
"PackageDescription": "1 TUBE in 1 CARTON (46708-582-04) / 5 g in 1 TUBE",
"NDC11Code": "46708-0582-04",
"ProductNDC": "46708-582",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine",
"NonProprietaryName": "Lidocaine And Prilocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213923",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250403",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine and prilocaine cream (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. - normal intact skin for local analgesia. - genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia. Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).",
"Description": "Lidocaine and prilocaine cream, USP 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid esters (as emulsifiers), carbomer homopolymer type B (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00."
},
{
"NDCCode": "46708-582-31",
"PackageDescription": "1 TUBE in 1 CARTON (46708-582-31) / 30 g in 1 TUBE",
"NDC11Code": "46708-0582-31",
"ProductNDC": "46708-582",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine",
"NonProprietaryName": "Lidocaine And Prilocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213923",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250403",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine and prilocaine cream (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. - normal intact skin for local analgesia. - genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia. Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).",
"Description": "Lidocaine and prilocaine cream, USP 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid esters (as emulsifiers), carbomer homopolymer type B (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00."
},
{
"NDCCode": "0002-0213-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-0213-01",
"ProductNDC": "0002-0213",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"EndMarketingDate": "20261215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230620",
"EndMarketingDatePackage": "20261215",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-0800-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-0800-01",
"ProductNDC": "0002-0800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Diluent",
"NonProprietaryName": "Diluent",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19870710",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19870710",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-7510-01",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19960724",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-17",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-17) / 3 mL in 1 VIAL",
"NDC11Code": "00002-7510-17",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091204",
"EndMarketingDatePackage": "20250808",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-99",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-99) / 10 mL in 1 VIAL",
"NDC11Code": "00002-7510-99",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960724",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7511-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7511-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7511-01",
"ProductNDC": "0002-7511",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix75/25",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021017",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20001010",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of HUMALOG Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7512-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7512-01",
"ProductNDC": "0002-7512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix50/50",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021018",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060207",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7512-99",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-99) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7512-99",
"ProductNDC": "0002-7512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix50/50",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021018",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20061019",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7516-59",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0002-7516-59) / 3 mL in 1 CARTRIDGE (0002-7516-01) ",
"NDC11Code": "00002-7516-59",
"ProductNDC": "0002-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000726",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7516-99",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0002-7516-99) / 3 mL in 1 CARTRIDGE",
"NDC11Code": "00002-7516-99",
"ProductNDC": "0002-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000726",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7533-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7533-01) / 3 mL in 1 VIAL",
"NDC11Code": "00002-7533-01",
"ProductNDC": "0002-7533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230802",
"EndMarketingDate": "20251217",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230802",
"EndMarketingDatePackage": "20251217",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7712-27",
"PackageDescription": "2 SYRINGE in 1 CARTON (0002-7712-27) / 3 mL in 1 SYRINGE (0002-7712-01) ",
"NDC11Code": "00002-7712-27",
"ProductNDC": "0002-7712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150526",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA205747",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150526",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7712-61",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-7712-61) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-7712-61",
"ProductNDC": "0002-7712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150526",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA205747",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7714-59",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-7714-59) / 3 mL in 1 SYRINGE (0002-7714-01) ",
"NDC11Code": "00002-7714-59",
"ProductNDC": "0002-7714",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20170606",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7714-61",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-7714-61) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-7714-61",
"ProductNDC": "0002-7714",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20170606",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170925",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>46708-808-00</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-808-00) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0808-00</NDC11Code>
<ProductNDC>46708-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214590</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>46708-808-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-808-20) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0808-20</NDC11Code>
<ProductNDC>46708-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214590</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>61303-808-00</NDCCode>
<PackageDescription>25 kg in 1 BOX (61303-808-00) </PackageDescription>
<NDC11Code>61303-0808-00</NDC11Code>
<ProductNDC>61303-808</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cefalexin Monohydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20071201</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CENTRIENT PHARMACEUTICALS SPAIN S.A.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>kg/25kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-04-09</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-DEC-07</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68479-808-00</NDCCode>
<PackageDescription>2 mL in 1 POUCH (68479-808-00)</PackageDescription>
<NDC11Code>68479-0808-00</NDC11Code>
<ProductNDC>68479-808</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Oil Control</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20031204</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part358H</ApplicationNumber>
<LabelerName>Dermalogica, Inc.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the treatment of acne.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>81234-808-00</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 BOX (81234-808-00) / 15 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>81234-0808-00</NDC11Code>
<ProductNDC>81234-808</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lumin Broad Spectrum Moisturizer With Spf 30 Pa Uva/uvb Protection Sunscreen</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<EndMarketingDate>20250105</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Pangaea Holdings Inc.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<EndMarketingDatePackage>20250105</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42283-023-00</NDCCode>
<PackageDescription>50 LIQUID in 1 BOTTLE (42283-023-00)</PackageDescription>
<NDC11Code>42283-0023-00</NDC11Code>
<ProductNDC>42283-023</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lactovit Deo Roll On Lactourea Deodorant Antiperspirant</ProprietaryName>
<NonProprietaryName>Aluminum Chlorohydrate, Aluminum Sesquichlorohydrate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161119</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Laboratorios Genesse SL</LabelerName>
<SubstanceName>ALUMINUM CHLOROHYDRATE; ALUMINUM SESQUICHLOROHYDRATE</SubstanceName>
<StrengthNumber>6.4; .808</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-28</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-0353-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-0353-0) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>50090-0353-00</NDC11Code>
<ProductNDC>50090-0353</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin R</ProprietaryName>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>50090-1375-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-1375-0) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>50090-1375-00</NDC11Code>
<ProductNDC>50090-1375</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-1663-0</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (50090-1663-0) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>50090-1663-00</NDC11Code>
<ProductNDC>50090-1663</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20070906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-4073-0</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (50090-4073-0) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>50090-4073-00</NDC11Code>
<ProductNDC>50090-4073</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20070906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-4488-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-4488-0) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>50090-4488-00</NDC11Code>
<ProductNDC>50090-4488</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-5391-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-5391-0) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>50090-5391-00</NDC11Code>
<ProductNDC>50090-5391</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>70518-3936-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (70518-3936-0) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>70518-3936-00</NDC11Code>
<ProductNDC>70518-3936</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20231206</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C 257H 383N 65O 77S 6and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>46708-582-04</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-582-04) / 5 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0582-04</NDC11Code>
<ProductNDC>46708-582</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
<NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213923</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine and prilocaine cream (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. - normal intact skin for local analgesia. - genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia. Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).</IndicationAndUsage>
<Description>Lidocaine and prilocaine cream, USP 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid esters (as emulsifiers), carbomer homopolymer type B (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00.</Description>
</NDC>
<NDC>
<NDCCode>46708-582-31</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (46708-582-31) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>46708-0582-31</NDC11Code>
<ProductNDC>46708-582</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
<NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213923</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine and prilocaine cream (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. - normal intact skin for local analgesia. - genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia. Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).</IndicationAndUsage>
<Description>Lidocaine and prilocaine cream, USP 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1:1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2-methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg, prilocaine 25 mg, polyoxyethylene fatty acid esters (as emulsifiers), carbomer homopolymer type B (as a thickening agent), sodium hydroxide to adjust to a pH approximating 9, and purified water to 1 gram. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00.</Description>
</NDC>
<NDC>
<NDCCode>0002-0213-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-0213-01</NDC11Code>
<ProductNDC>0002-0213</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<EndMarketingDate>20261215</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230620</StartMarketingDatePackage>
<EndMarketingDatePackage>20261215</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-0800-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-0800-01</NDC11Code>
<ProductNDC>0002-0800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Diluent</ProprietaryName>
<NonProprietaryName>Diluent</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870710</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-01</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-17</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-17) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-17</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091204</StartMarketingDatePackage>
<EndMarketingDatePackage>20250808</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-99</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-99) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-99</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960724</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7511-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7511-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7511-01</NDC11Code>
<ProductNDC>0002-7511</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix75/25</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021017</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20001010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of HUMALOG Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7512-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7512-01</NDC11Code>
<ProductNDC>0002-7512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix50/50</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021018</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060207</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7512-99</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-99) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7512-99</NDC11Code>
<ProductNDC>0002-7512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix50/50</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021018</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20061019</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7516-59</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0002-7516-59) / 3 mL in 1 CARTRIDGE (0002-7516-01) </PackageDescription>
<NDC11Code>00002-7516-59</NDC11Code>
<ProductNDC>0002-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7516-99</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0002-7516-99) / 3 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00002-7516-99</NDC11Code>
<ProductNDC>0002-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000726</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7533-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7533-01) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7533-01</NDC11Code>
<ProductNDC>0002-7533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230802</StartMarketingDate>
<EndMarketingDate>20251217</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230802</StartMarketingDatePackage>
<EndMarketingDatePackage>20251217</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7712-27</NDCCode>
<PackageDescription>2 SYRINGE in 1 CARTON (0002-7712-27) / 3 mL in 1 SYRINGE (0002-7712-01) </PackageDescription>
<NDC11Code>00002-7712-27</NDC11Code>
<ProductNDC>0002-7712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150526</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA205747</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7712-61</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-7712-61) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-7712-61</NDC11Code>
<ProductNDC>0002-7712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150526</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA205747</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7714-59</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-7714-59) / 3 mL in 1 SYRINGE (0002-7714-01) </PackageDescription>
<NDC11Code>00002-7714-59</NDC11Code>
<ProductNDC>0002-7714</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7714-61</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-7714-61) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-7714-61</NDC11Code>
<ProductNDC>0002-7714</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170925</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
</NDCList>