{
"NDC": [
{
"NDCCode": "47335-631-49",
"PackageDescription": "6 POUCH in 1 CARTON (47335-631-49) / 5 AMPULE in 1 POUCH (47335-631-48) / 2 mL in 1 AMPULE",
"NDC11Code": "47335-0631-49",
"ProductNDC": "47335-631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211922",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210501",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "47335-171-49",
"PackageDescription": "14 POUCH in 1 CARTON (47335-171-49) / 4 AMPULE in 1 POUCH (47335-171-48) / 5 mL in 1 AMPULE",
"NDC11Code": "47335-0171-49",
"ProductNDC": "47335-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207136",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2023-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200228",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin inhalation solution is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].",
"Description": "Tobramycin inhalation solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, colorless to light yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampule contains 300 mg tobramycin USP and 11.25 mg sodium chloride in water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives."
},
{
"NDCCode": "47335-632-49",
"PackageDescription": "6 POUCH in 1 CARTON (47335-632-49) / 5 AMPULE in 1 POUCH (47335-632-48) / 2 mL in 1 AMPULE",
"NDC11Code": "47335-0632-49",
"ProductNDC": "47335-632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211922",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210501",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "47335-633-49",
"PackageDescription": "6 POUCH in 1 CARTON (47335-633-49) / 5 AMPULE in 1 POUCH (47335-633-48) / 2 mL in 1 AMPULE",
"NDC11Code": "47335-0633-49",
"ProductNDC": "47335-633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211922",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210501",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "47335-703-49",
"PackageDescription": "5 POUCH in 1 CARTON (47335-703-49) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL",
"NDC11Code": "47335-0703-49",
"ProductNDC": "47335-703",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207857",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": ".83",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210611",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.",
"Description": "Albuterol inhalation solution is a relatively selective beta2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α1[(tert-Butylamino)methyl]-4-hydroxy-m-xylene-α,α´diol sulfate (2:1) (salt), and the following structural formula. Albuterol sulfate has a molecular weight of 576.71 and the molecular formula (C13H21 NO3)2 H2SO4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol inhalation solution, USP 0.083% requires no dilution before administration. Each mL of albuterol inhalation solution, USP (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate USP) in an isotonic, sterile, aqueous solution containing sodium chloride, edetate disodium and sodium citrate; hydrochloric acid is used to adjust the pH between 3 and 5. Albuterol inhalation solution, USP (0.083%) contains no sulfiting agents. Albuterol inhalation solution is a clear, colorless solution."
},
{
"NDCCode": "47335-706-49",
"PackageDescription": "5 POUCH in 1 CARTON (47335-706-49) > 5 VIAL in 1 POUCH (47335-706-48) > 2.5 mL in 1 VIAL",
"NDC11Code": "47335-0706-49",
"ProductNDC": "47335-706",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide",
"NonProprietaryName": "Ipratropium Bromide",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207903",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200204",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium Bromide Inhalation Solution administered either alone or with other bronchodilators, especially beta adrenergics, is indicated as a bronchodilator for maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease, including chronic bronchitis and emphysema.",
"Description": "The active ingredient in Ipratropium Bromide Inhalation Solution, USP is ipratropium bromide monohydrate, USP. It is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo[3.2.1]-octane,3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1- methylethyl)-, bromide, monohydrate (endo, syn)-,(±)-; a synthetic quaternary ammonium compound, chemically related to atropine.Ipratropium bromide is a white crystalline substance, freely soluble in water and lower alcohols. It is a quaternary ammonium compound and thus exists in an ionized state in aqueous solutions. It is relatively insoluble in non-polar media. Ipratropium Bromide Inhalation Solution, USP is administered by oral inhalation with the aid of a nebulizer. Each mL contains ipratropium bromide, USP 0.02% (anhydrous basis) in a sterile, preservative-free, isotonic saline solution, pH adjusted to 3.4 (3 to 4) with hydrochloric acid."
},
{
"NDCCode": "47335-743-49",
"PackageDescription": "2 POUCH in 1 CARTON (47335-743-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "47335-0743-49",
"ProductNDC": "47335-743",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol Inhalation Solution",
"NonProprietaryName": "Levalbuterol Inhalation Solution",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207820",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".31",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "47335-746-49",
"PackageDescription": "2 POUCH in 1 CARTON (47335-746-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "47335-0746-49",
"ProductNDC": "47335-746",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol Inhalation Solution",
"NonProprietaryName": "Levalbuterol Inhalation Solution",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207820",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "47335-753-49",
"PackageDescription": "2 POUCH in 1 CARTON (47335-753-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "47335-0753-49",
"ProductNDC": "47335-753",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol Inhalation Solution",
"NonProprietaryName": "Levalbuterol Inhalation Solution",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207820",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "47335-756-49",
"PackageDescription": "6 POUCH in 1 CARTON (47335-756-49) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL",
"NDC11Code": "47335-0756-49",
"ProductNDC": "47335-756",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207875",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 2.5",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211115",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium bromide and albuterol sulfate inhalation solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.",
"Description": "The active components in ipratropium bromide and albuterol sulfate inhalation solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β2-adrenergic bronchodilator chemically described as α1 -[(tert-butylamino)methyl]-4-hydroxy-m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the molecular formula is (C13H21NO3)2H2SO4. It is a white or practically white powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3 1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1methylethyl)-, bromide, monohydrate (endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the molecular formula is C20H30BrNO3H2O. It is a white to off-white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3. 1-2. Chemical structure of ipratropium bromide. Each 3 mL vial of ipratropium bromide and albuterol sulfate inhalation solution contains 3 mg (0.1%) of albuterol sulfate USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide USP in an isotonic, sterile, aqueous solution containing sodium chloride, hydrochloric acid to adjust to pH 4, edetate disodium, USP (a chelating agent) and water for injection. Ipratropium bromide and albuterol sulfate inhalation solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For ipratropium bromide and albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium bromide and albuterol sulfate inhalation solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "62157-631-01",
"PackageDescription": "50 g in 1 JAR (62157-631-01)",
"NDC11Code": "62157-0631-01",
"ProductNDC": "62157-631",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Avanafil",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180726",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "AX Pharmaceutical Corp",
"SubstanceName": "AVANAFIL",
"StrengthNumber": "49.5",
"StrengthUnit": "g/50g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "47335-303-15",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (47335-303-15) ",
"NDC11Code": "47335-0303-15",
"ProductNDC": "47335-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Odomzo",
"NonProprietaryName": "Sonidegib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205266",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "SONIDEGIB PHOSPHATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170921",
"SamplePackage": "N",
"IndicationAndUsage": "ODOMZO (sonidegib) is indicated for the treatment of adult patients with locally advanced basal cell carcinoma (BCC) that has recurred following surgery or radiation therapy, or those who are not candidates for surgery or radiation therapy.",
"Description": "Sonidegib is a Hh pathway inhibitor. The molecular formula for sonidegib phosphate is C26H26 F3N3O3 2H3PO4. The molecular weight is 681.49 daltons. The chemical name is N-[6-(cis-2,6-dimethylmorpholin-4-yl)pyridine-3-yl]-2-methyl-4’-(trifluoromethoxy) [1,1’-biphenyl]-3-carboxamide diphosphate. The molecular structure is shown below. Sonidegib phosphate is a white to off-white powder. Sonidegib freebase is practically insoluble. ODOMZO (sonidegib) capsules for oral use contain 200 mg of sonidegib as the freebase (equivalent to 281 mg of diphosphate salt of sonidegib) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, poloxamer and sodium lauryl sulfate. The opaque pink hard gelatin capsule shell contains gelatin, red iron oxide, and titanium dioxide. The black printing ink contains ammonium hydroxide, black iron oxide, propylene glycol, and shellac."
},
{
"NDCCode": "47335-303-83",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (47335-303-83) ",
"NDC11Code": "47335-0303-83",
"ProductNDC": "47335-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Odomzo",
"NonProprietaryName": "Sonidegib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205266",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "SONIDEGIB PHOSPHATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170921",
"SamplePackage": "N",
"IndicationAndUsage": "ODOMZO (sonidegib) is indicated for the treatment of adult patients with locally advanced basal cell carcinoma (BCC) that has recurred following surgery or radiation therapy, or those who are not candidates for surgery or radiation therapy.",
"Description": "Sonidegib is a Hh pathway inhibitor. The molecular formula for sonidegib phosphate is C26H26 F3N3O3 2H3PO4. The molecular weight is 681.49 daltons. The chemical name is N-[6-(cis-2,6-dimethylmorpholin-4-yl)pyridine-3-yl]-2-methyl-4’-(trifluoromethoxy) [1,1’-biphenyl]-3-carboxamide diphosphate. The molecular structure is shown below. Sonidegib phosphate is a white to off-white powder. Sonidegib freebase is practically insoluble. ODOMZO (sonidegib) capsules for oral use contain 200 mg of sonidegib as the freebase (equivalent to 281 mg of diphosphate salt of sonidegib) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, poloxamer and sodium lauryl sulfate. The opaque pink hard gelatin capsule shell contains gelatin, red iron oxide, and titanium dioxide. The black printing ink contains ammonium hydroxide, black iron oxide, propylene glycol, and shellac."
},
{
"NDCCode": "47335-744-83",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-744-83) ",
"NDC11Code": "47335-0744-83",
"ProductNDC": "47335-744",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-744-88",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-744-88) ",
"NDC11Code": "47335-0744-88",
"ProductNDC": "47335-744",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-765-83",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-765-83) ",
"NDC11Code": "47335-0765-83",
"ProductNDC": "47335-765",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-765-88",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-765-88) ",
"NDC11Code": "47335-0765-88",
"ProductNDC": "47335-765",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-766-83",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-766-83) ",
"NDC11Code": "47335-0766-83",
"ProductNDC": "47335-766",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-766-88",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-766-88) ",
"NDC11Code": "47335-0766-88",
"ProductNDC": "47335-766",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-767-83",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-767-83) ",
"NDC11Code": "47335-0767-83",
"ProductNDC": "47335-767",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "9",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "47335-767-88",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-767-88) ",
"NDC11Code": "47335-0767-88",
"ProductNDC": "47335-767",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205618",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "9",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).",
"Description": "Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "0069-0274-30",
"PackageDescription": "1 BOTTLE in 1 CARTON (0069-0274-30) / 30 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "00069-0274-30",
"ProductNDC": "0069-0274",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Velsipity",
"NonProprietaryName": "Etrasimod",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20231019",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216956",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "ETRASIMOD ARGININE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231019",
"SamplePackage": "N",
"IndicationAndUsage": "VELSIPITY is indicated for the treatment of moderately to severely active ulcerative colitis (UC) in adults.",
"Description": "VELSIPITY contains etrasimod, a sphingosine 1-phosphate (S1P) receptor modulator, supplied as etrasimod arginine. Etrasimod arginine is a white, off-white to light brown solid that is slightly soluble in water. The chemical name of etrasimod arginine is L-Arginine, (3R)-7-[[4-cyclopentyl-3-(trifluoromethyl)phenyl]methoxy]-1,2,3,4-tetrahydrocyclopent[b]indole-3-acetate (1:1) having a molecular formula of C32H40F3N5O5 and a molecular weight of 631.69 g/mol. The chemical structure of etrasimod arginine is. VELSIPITY is supplied for oral administration as 2 mg tablets. Each tablet contains 2 mg etrasimod (equivalent to 2.76 mg etrasimod arginine) and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, and sodium starch glycolate, with a film coating containing FD&C blue #1/brilliant blue FCF aluminum lake, FD&C blue #2/indigo carmine aluminum lake, FD&C yellow #5/tartrazine aluminum lake, macrogol 4000 JP/PEG 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide."
},
{
"NDCCode": "0074-0038-07",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0074-0038-07) / 7 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00074-0038-07",
"ProductNDC": "0074-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Orilissa",
"NonProprietaryName": "Elagolix",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210450",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "ELAGOLIX SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "Y",
"IndicationAndUsage": "ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].",
"Description": "ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red."
},
{
"NDCCode": "0074-0038-28",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (0074-0038-28) / 7 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00074-0038-28",
"ProductNDC": "0074-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Orilissa",
"NonProprietaryName": "Elagolix",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210450",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "ELAGOLIX SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].",
"Description": "ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red."
},
{
"NDCCode": "0074-0039-14",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0074-0039-14) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00074-0039-14",
"ProductNDC": "0074-0039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Orilissa",
"NonProprietaryName": "Elagolix",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210450",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "ELAGOLIX SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "Y",
"IndicationAndUsage": "ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].",
"Description": "ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red."
},
{
"NDCCode": "0074-0039-56",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (0074-0039-56) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00074-0039-56",
"ProductNDC": "0074-0039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Orilissa",
"NonProprietaryName": "Elagolix",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210450",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "ELAGOLIX SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].",
"Description": "ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red."
},
{
"NDCCode": "0074-1017-14",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0074-1017-14) / 1 KIT in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "00074-1017-14",
"ProductNDC": "0074-1017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oriahnn",
"NonProprietaryName": "Elagolix And Estradiol And Norethisterone",
"DosageFormName": "KIT",
"StartMarketingDate": "20200529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213388",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200924",
"SamplePackage": "Y",
"IndicationAndUsage": "ORIAHNN is indicated for the management of heavy menstrual bleeding associated with uterine leiomyomas (fibroids) in premenopausal women. Limitation of Use. Use of ORIAHNN should be limited to 24 months due to the risk of continued bone loss, which may not be reversible [see Dosage and Administration (2.1) and Warnings and Precautions (5.2)].",
"Description": "ORIAHNN consists of two capsules: one to be taken orally in the morning (AM) and one to be taken orally in the evening (PM). The AM capsule is white and yellow and contains 300 mg elagolix (equivalent to 310.4 mg of elagolix sodium), 1 mg estradiol, and 0.5 mg norethindrone acetate. The PM capsule is white and light blue and contains 300 mg of elagolix (equivalent to 310 mg of elagolix sodium). Elagolix. Elagolix sodium is the sodium salt of the active moiety elagolix, a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular formula of C32H30F5N3O5 and a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off-white to light yellow powder and is freely soluble in water. Estradiol. Estradiol (E2), an estrogen, is a white or almost white crystalline powder. Its chemical name is estra-1,3,5(10)-triene-3,17β-diol with the molecular formula of C18H24O2, and molecular weight of 272.38. The structural formula of E2 is as follows:. Norethindrone acetate. Norethindrone acetate (NETA), a progestin, is a white or yellowish white crystalline powder. Its chemical name is 17β-acetoxy-19-nor-17α-pregn-4-en-20-yn-3-one with the molecular formula of C22H28O3 and molecular weight of 340.46. ORIAHNN morning (AM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, lactose monohydrate, starch (corn), copovidone, talc, hypromellose, triacetin, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Red #40, FD&C Yellow #5 [see Warnings and Precautions (5.12)], FD&C Yellow #6, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water). ORIAHNN evening (PM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Blue #2, FDA/E172 yellow iron oxide, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water)."
},
{
"NDCCode": "0074-1017-56",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (0074-1017-56) / 1 KIT in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "00074-1017-56",
"ProductNDC": "0074-1017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oriahnn",
"NonProprietaryName": "Elagolix And Estradiol And Norethisterone",
"DosageFormName": "KIT",
"StartMarketingDate": "20200529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213388",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200529",
"SamplePackage": "N",
"IndicationAndUsage": "ORIAHNN is indicated for the management of heavy menstrual bleeding associated with uterine leiomyomas (fibroids) in premenopausal women. Limitation of Use. Use of ORIAHNN should be limited to 24 months due to the risk of continued bone loss, which may not be reversible [see Dosage and Administration (2.1) and Warnings and Precautions (5.2)].",
"Description": "ORIAHNN consists of two capsules: one to be taken orally in the morning (AM) and one to be taken orally in the evening (PM). The AM capsule is white and yellow and contains 300 mg elagolix (equivalent to 310.4 mg of elagolix sodium), 1 mg estradiol, and 0.5 mg norethindrone acetate. The PM capsule is white and light blue and contains 300 mg of elagolix (equivalent to 310 mg of elagolix sodium). Elagolix. Elagolix sodium is the sodium salt of the active moiety elagolix, a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular formula of C32H30F5N3O5 and a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off-white to light yellow powder and is freely soluble in water. Estradiol. Estradiol (E2), an estrogen, is a white or almost white crystalline powder. Its chemical name is estra-1,3,5(10)-triene-3,17β-diol with the molecular formula of C18H24O2, and molecular weight of 272.38. The structural formula of E2 is as follows:. Norethindrone acetate. Norethindrone acetate (NETA), a progestin, is a white or yellowish white crystalline powder. Its chemical name is 17β-acetoxy-19-nor-17α-pregn-4-en-20-yn-3-one with the molecular formula of C22H28O3 and molecular weight of 340.46. ORIAHNN morning (AM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, lactose monohydrate, starch (corn), copovidone, talc, hypromellose, triacetin, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Red #40, FD&C Yellow #5 [see Warnings and Precautions (5.12)], FD&C Yellow #6, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water). ORIAHNN evening (PM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Blue #2, FDA/E172 yellow iron oxide, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water)."
},
{
"NDCCode": "10019-631-01",
"PackageDescription": "10 VIAL in 1 PACKAGE (10019-631-01) > 4 mL in 1 VIAL (10019-631-31)",
"NDC11Code": "10019-0631-01",
"ProductNDC": "10019-631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-07-28"
},
{
"NDCCode": "10135-631-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (10135-631-01) ",
"NDC11Code": "10135-0631-01",
"ProductNDC": "10135-631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acebutolol Hydrochloride",
"NonProprietaryName": "Acebutolol Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075047",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ACEBUTOLOL HYDROCHLORIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20171020",
"SamplePackage": "N",
"IndicationAndUsage": "Acebutolol hydrochloride capsules, USP are indicated for the management of hypertension in adults. It may be used alone or in combination with other antihypertensive agents, especially thiazide-type diuretics.",
"Description": "Acebutolol HCl, USP is a selective, hydrophilic beta-adrenoreceptor blocking agent with mild intrinsic sympathomimetic activity for use in treating patients with hypertension and ventricular arrhythmias. It is marketed in capsule form for oral administration. Acebutolol HCl capsules, USP are provided in two dosage strengths which contain 200 mg or 400 mg of acebutolol as the hydrochloride salt. The inactive ingredients present are D&C Red 28, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, gelatin, maize starch, povidone, stearic acid and titanium dioxide. Acebutolol HCl, USP has the following structural formula. C18 H28 N2 O4 HCl M.W. 372.89. Acebutolol HCl, USP is a white or slightly off-white powder freely soluble in water, and less soluble in alcohol. Chemically it is defined as the hydrochloride salt of (±) N-[3-Acetyl-4-[2- hydroxy-3-[(1-methylethyl) amino] propoxy] phenyl] butanamide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>47335-631-49</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (47335-631-49) / 5 AMPULE in 1 POUCH (47335-631-48) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>47335-0631-49</NDC11Code>
<ProductNDC>47335-631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211922</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>47335-171-49</NDCCode>
<PackageDescription>14 POUCH in 1 CARTON (47335-171-49) / 4 AMPULE in 1 POUCH (47335-171-48) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>47335-0171-49</NDC11Code>
<ProductNDC>47335-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207136</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin inhalation solution is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Tobramycin inhalation solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, colorless to light yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampule contains 300 mg tobramycin USP and 11.25 mg sodium chloride in water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>47335-632-49</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (47335-632-49) / 5 AMPULE in 1 POUCH (47335-632-48) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>47335-0632-49</NDC11Code>
<ProductNDC>47335-632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211922</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>47335-633-49</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (47335-633-49) / 5 AMPULE in 1 POUCH (47335-633-48) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>47335-0633-49</NDC11Code>
<ProductNDC>47335-633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211922</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>47335-703-49</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (47335-703-49) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>47335-0703-49</NDC11Code>
<ProductNDC>47335-703</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207857</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.83</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
<Description>Albuterol inhalation solution is a relatively selective beta2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α1[(tert-Butylamino)methyl]-4-hydroxy-m-xylene-α,α´diol sulfate (2:1) (salt), and the following structural formula. Albuterol sulfate has a molecular weight of 576.71 and the molecular formula (C13H21 NO3)2 H2SO4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol inhalation solution, USP 0.083% requires no dilution before administration. Each mL of albuterol inhalation solution, USP (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate USP) in an isotonic, sterile, aqueous solution containing sodium chloride, edetate disodium and sodium citrate; hydrochloric acid is used to adjust the pH between 3 and 5. Albuterol inhalation solution, USP (0.083%) contains no sulfiting agents. Albuterol inhalation solution is a clear, colorless solution.</Description>
</NDC>
<NDC>
<NDCCode>47335-706-49</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (47335-706-49) > 5 VIAL in 1 POUCH (47335-706-48) > 2.5 mL in 1 VIAL</PackageDescription>
<NDC11Code>47335-0706-49</NDC11Code>
<ProductNDC>47335-706</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207903</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium Bromide Inhalation Solution administered either alone or with other bronchodilators, especially beta adrenergics, is indicated as a bronchodilator for maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease, including chronic bronchitis and emphysema.</IndicationAndUsage>
<Description>The active ingredient in Ipratropium Bromide Inhalation Solution, USP is ipratropium bromide monohydrate, USP. It is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo[3.2.1]-octane,3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1- methylethyl)-, bromide, monohydrate (endo, syn)-,(±)-; a synthetic quaternary ammonium compound, chemically related to atropine.Ipratropium bromide is a white crystalline substance, freely soluble in water and lower alcohols. It is a quaternary ammonium compound and thus exists in an ionized state in aqueous solutions. It is relatively insoluble in non-polar media. Ipratropium Bromide Inhalation Solution, USP is administered by oral inhalation with the aid of a nebulizer. Each mL contains ipratropium bromide, USP 0.02% (anhydrous basis) in a sterile, preservative-free, isotonic saline solution, pH adjusted to 3.4 (3 to 4) with hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>47335-743-49</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (47335-743-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>47335-0743-49</NDC11Code>
<ProductNDC>47335-743</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol Inhalation Solution</ProprietaryName>
<NonProprietaryName>Levalbuterol Inhalation Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207820</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.31</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>47335-746-49</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (47335-746-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>47335-0746-49</NDC11Code>
<ProductNDC>47335-746</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol Inhalation Solution</ProprietaryName>
<NonProprietaryName>Levalbuterol Inhalation Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207820</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>47335-753-49</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (47335-753-49) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>47335-0753-49</NDC11Code>
<ProductNDC>47335-753</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol Inhalation Solution</ProprietaryName>
<NonProprietaryName>Levalbuterol Inhalation Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207820</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol inhalation solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol inhalation solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1 dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol inhalation solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl, USP) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl, USP) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl, USP), sodium chloride to adjust tonicity, 0.30 mg of edetate disodium and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>47335-756-49</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (47335-756-49) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>47335-0756-49</NDC11Code>
<ProductNDC>47335-756</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207875</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 2.5</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium bromide and albuterol sulfate inhalation solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
<Description>The active components in ipratropium bromide and albuterol sulfate inhalation solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate, is a salt of racemic albuterol and a relatively selective β2-adrenergic bronchodilator chemically described as α1 -[(tert-butylamino)methyl]-4-hydroxy-m-xylene-α, α'-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the molecular formula is (C13H21NO3)2H2SO4. It is a white or practically white powder, soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Figure 3 1-1. Chemical structure of albuterol sulfate. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo [3.2.1]-octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8methyl-8-(1methylethyl)-, bromide, monohydrate (endo, syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the molecular formula is C20H30BrNO3H2O. It is a white to off-white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Figure 3. 1-2. Chemical structure of ipratropium bromide. Each 3 mL vial of ipratropium bromide and albuterol sulfate inhalation solution contains 3 mg (0.1%) of albuterol sulfate USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide USP in an isotonic, sterile, aqueous solution containing sodium chloride, hydrochloric acid to adjust to pH 4, edetate disodium, USP (a chelating agent) and water for injection. Ipratropium bromide and albuterol sulfate inhalation solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For ipratropium bromide and albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium bromide and albuterol sulfate inhalation solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>62157-631-01</NDCCode>
<PackageDescription>50 g in 1 JAR (62157-631-01)</PackageDescription>
<NDC11Code>62157-0631-01</NDC11Code>
<ProductNDC>62157-631</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Avanafil</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180726</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>AX Pharmaceutical Corp</LabelerName>
<SubstanceName>AVANAFIL</SubstanceName>
<StrengthNumber>49.5</StrengthNumber>
<StrengthUnit>g/50g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>47335-303-15</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (47335-303-15) </PackageDescription>
<NDC11Code>47335-0303-15</NDC11Code>
<ProductNDC>47335-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Odomzo</ProprietaryName>
<NonProprietaryName>Sonidegib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205266</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>SONIDEGIB PHOSPHATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ODOMZO (sonidegib) is indicated for the treatment of adult patients with locally advanced basal cell carcinoma (BCC) that has recurred following surgery or radiation therapy, or those who are not candidates for surgery or radiation therapy.</IndicationAndUsage>
<Description>Sonidegib is a Hh pathway inhibitor. The molecular formula for sonidegib phosphate is C26H26 F3N3O3 2H3PO4. The molecular weight is 681.49 daltons. The chemical name is N-[6-(cis-2,6-dimethylmorpholin-4-yl)pyridine-3-yl]-2-methyl-4’-(trifluoromethoxy) [1,1’-biphenyl]-3-carboxamide diphosphate. The molecular structure is shown below. Sonidegib phosphate is a white to off-white powder. Sonidegib freebase is practically insoluble. ODOMZO (sonidegib) capsules for oral use contain 200 mg of sonidegib as the freebase (equivalent to 281 mg of diphosphate salt of sonidegib) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, poloxamer and sodium lauryl sulfate. The opaque pink hard gelatin capsule shell contains gelatin, red iron oxide, and titanium dioxide. The black printing ink contains ammonium hydroxide, black iron oxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>47335-303-83</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (47335-303-83) </PackageDescription>
<NDC11Code>47335-0303-83</NDC11Code>
<ProductNDC>47335-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Odomzo</ProprietaryName>
<NonProprietaryName>Sonidegib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205266</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>SONIDEGIB PHOSPHATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hedgehog Pathway Inhibitor [EPC], Smoothened Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ODOMZO (sonidegib) is indicated for the treatment of adult patients with locally advanced basal cell carcinoma (BCC) that has recurred following surgery or radiation therapy, or those who are not candidates for surgery or radiation therapy.</IndicationAndUsage>
<Description>Sonidegib is a Hh pathway inhibitor. The molecular formula for sonidegib phosphate is C26H26 F3N3O3 2H3PO4. The molecular weight is 681.49 daltons. The chemical name is N-[6-(cis-2,6-dimethylmorpholin-4-yl)pyridine-3-yl]-2-methyl-4’-(trifluoromethoxy) [1,1’-biphenyl]-3-carboxamide diphosphate. The molecular structure is shown below. Sonidegib phosphate is a white to off-white powder. Sonidegib freebase is practically insoluble. ODOMZO (sonidegib) capsules for oral use contain 200 mg of sonidegib as the freebase (equivalent to 281 mg of diphosphate salt of sonidegib) and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, poloxamer and sodium lauryl sulfate. The opaque pink hard gelatin capsule shell contains gelatin, red iron oxide, and titanium dioxide. The black printing ink contains ammonium hydroxide, black iron oxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>47335-744-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-744-83) </PackageDescription>
<NDC11Code>47335-0744-83</NDC11Code>
<ProductNDC>47335-744</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-744-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-744-88) </PackageDescription>
<NDC11Code>47335-0744-88</NDC11Code>
<ProductNDC>47335-744</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-765-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-765-83) </PackageDescription>
<NDC11Code>47335-0765-83</NDC11Code>
<ProductNDC>47335-765</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-765-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-765-88) </PackageDescription>
<NDC11Code>47335-0765-88</NDC11Code>
<ProductNDC>47335-765</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-766-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-766-83) </PackageDescription>
<NDC11Code>47335-0766-83</NDC11Code>
<ProductNDC>47335-766</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-766-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-766-88) </PackageDescription>
<NDC11Code>47335-0766-88</NDC11Code>
<ProductNDC>47335-766</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-767-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-767-83) </PackageDescription>
<NDC11Code>47335-0767-83</NDC11Code>
<ProductNDC>47335-767</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>47335-767-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (47335-767-88) </PackageDescription>
<NDC11Code>47335-0767-88</NDC11Code>
<ProductNDC>47335-767</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205618</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paliperidone is an atypical antipsychotic agent indicated for Treatment of schizophrenia (1.1) Adults: Efficacy was established in three 6-week trials and one maintenance trial. (14.1) Adolescents (ages 12 to 17): Efficacy was established in one 6-week trial. (14.1) Treatment of schizoaffective disorder as monotherapy and as an adjunct to mood stabilizers and/or antidepressants. (1.2) Efficacy was established in two 6-week trials in adult patients. (14.2).</IndicationAndUsage>
<Description>Paliperidone extended-release tablet contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white to off-white), 6 mg (yellow), and 9 mg (pink) strengths. Paliperidone extended-release tablets are formulated as a polymer matrix based once-a-day controlled release tablet for oral use. Inactive ingredients are polyethylene oxide, hypromellose, anhydrous lactose, magnesium stearate, ethyl cellulose, triethyl citrate, talc, titanium dioxide and polyethylene glycol. The 1.5 mg and 6 mg tablets also contain lactose monohydrate, iron oxide yellow and iron oxide red. The 9 mg tablets also contain lactose monohydrate and iron oxide red. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0069-0274-30</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0069-0274-30) / 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00069-0274-30</NDC11Code>
<ProductNDC>0069-0274</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Velsipity</ProprietaryName>
<NonProprietaryName>Etrasimod</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231019</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216956</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>ETRASIMOD ARGININE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VELSIPITY is indicated for the treatment of moderately to severely active ulcerative colitis (UC) in adults.</IndicationAndUsage>
<Description>VELSIPITY contains etrasimod, a sphingosine 1-phosphate (S1P) receptor modulator, supplied as etrasimod arginine. Etrasimod arginine is a white, off-white to light brown solid that is slightly soluble in water. The chemical name of etrasimod arginine is L-Arginine, (3R)-7-[[4-cyclopentyl-3-(trifluoromethyl)phenyl]methoxy]-1,2,3,4-tetrahydrocyclopent[b]indole-3-acetate (1:1) having a molecular formula of C32H40F3N5O5 and a molecular weight of 631.69 g/mol. The chemical structure of etrasimod arginine is. VELSIPITY is supplied for oral administration as 2 mg tablets. Each tablet contains 2 mg etrasimod (equivalent to 2.76 mg etrasimod arginine) and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, and sodium starch glycolate, with a film coating containing FD&C blue #1/brilliant blue FCF aluminum lake, FD&C blue #2/indigo carmine aluminum lake, FD&C yellow #5/tartrazine aluminum lake, macrogol 4000 JP/PEG 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0074-0038-07</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0074-0038-07) / 7 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-0038-07</NDC11Code>
<ProductNDC>0074-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Orilissa</ProprietaryName>
<NonProprietaryName>Elagolix</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210450</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>ELAGOLIX SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
<Description>ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>0074-0038-28</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (0074-0038-28) / 7 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-0038-28</NDC11Code>
<ProductNDC>0074-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Orilissa</ProprietaryName>
<NonProprietaryName>Elagolix</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210450</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>ELAGOLIX SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
<Description>ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>0074-0039-14</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0074-0039-14) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-0039-14</NDC11Code>
<ProductNDC>0074-0039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Orilissa</ProprietaryName>
<NonProprietaryName>Elagolix</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210450</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>ELAGOLIX SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
<Description>ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>0074-0039-56</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (0074-0039-56) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-0039-56</NDC11Code>
<ProductNDC>0074-0039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Orilissa</ProprietaryName>
<NonProprietaryName>Elagolix</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210450</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>ELAGOLIX SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ORILISSA is indicated for the management of moderate to severe pain associated with endometriosis. Limitations of Use:. Limit the duration of use based on the dose and coexisting condition (see Table 1) [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
<Description>ORILISSA (elagolix) tablets for oral administration contain elagolix sodium, the sodium salt of the active moiety elagolix. Elagolix sodium is a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off white to light yellow powder and is freely soluble in water. ORILISSA 150 mg tablets are light pink, oblong, film-coated tablets with “EL 150” debossed on one side. Each tablet contains 155.2 mg of elagolix sodium (equivalent to 150 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and carmine high tint. ORILISSA 200 mg tablets are light orange, oblong, film-coated tablets with “EL 200” debossed on one side. Each tablet contains 207.0 mg of elagolix sodium (equivalent to 200 mg of elagolix) as the active ingredient and the following inactive ingredients: mannitol, sodium carbonate monohydrate, pregelatinized starch, povidone, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>0074-1017-14</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0074-1017-14) / 1 KIT in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-1017-14</NDC11Code>
<ProductNDC>0074-1017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oriahnn</ProprietaryName>
<NonProprietaryName>Elagolix And Estradiol And Norethisterone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20200529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213388</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200924</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ORIAHNN is indicated for the management of heavy menstrual bleeding associated with uterine leiomyomas (fibroids) in premenopausal women. Limitation of Use. Use of ORIAHNN should be limited to 24 months due to the risk of continued bone loss, which may not be reversible [see Dosage and Administration (2.1) and Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>ORIAHNN consists of two capsules: one to be taken orally in the morning (AM) and one to be taken orally in the evening (PM). The AM capsule is white and yellow and contains 300 mg elagolix (equivalent to 310.4 mg of elagolix sodium), 1 mg estradiol, and 0.5 mg norethindrone acetate. The PM capsule is white and light blue and contains 300 mg of elagolix (equivalent to 310 mg of elagolix sodium). Elagolix. Elagolix sodium is the sodium salt of the active moiety elagolix, a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular formula of C32H30F5N3O5 and a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off-white to light yellow powder and is freely soluble in water. Estradiol. Estradiol (E2), an estrogen, is a white or almost white crystalline powder. Its chemical name is estra-1,3,5(10)-triene-3,17β-diol with the molecular formula of C18H24O2, and molecular weight of 272.38. The structural formula of E2 is as follows:. Norethindrone acetate. Norethindrone acetate (NETA), a progestin, is a white or yellowish white crystalline powder. Its chemical name is 17β-acetoxy-19-nor-17α-pregn-4-en-20-yn-3-one with the molecular formula of C22H28O3 and molecular weight of 340.46. ORIAHNN morning (AM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, lactose monohydrate, starch (corn), copovidone, talc, hypromellose, triacetin, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Red #40, FD&C Yellow #5 [see Warnings and Precautions (5.12)], FD&C Yellow #6, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water). ORIAHNN evening (PM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Blue #2, FDA/E172 yellow iron oxide, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water).</Description>
</NDC>
<NDC>
<NDCCode>0074-1017-56</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (0074-1017-56) / 1 KIT in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK * 7 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00074-1017-56</NDC11Code>
<ProductNDC>0074-1017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oriahnn</ProprietaryName>
<NonProprietaryName>Elagolix And Estradiol And Norethisterone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20200529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213388</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ORIAHNN is indicated for the management of heavy menstrual bleeding associated with uterine leiomyomas (fibroids) in premenopausal women. Limitation of Use. Use of ORIAHNN should be limited to 24 months due to the risk of continued bone loss, which may not be reversible [see Dosage and Administration (2.1) and Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>ORIAHNN consists of two capsules: one to be taken orally in the morning (AM) and one to be taken orally in the evening (PM). The AM capsule is white and yellow and contains 300 mg elagolix (equivalent to 310.4 mg of elagolix sodium), 1 mg estradiol, and 0.5 mg norethindrone acetate. The PM capsule is white and light blue and contains 300 mg of elagolix (equivalent to 310 mg of elagolix sodium). Elagolix. Elagolix sodium is the sodium salt of the active moiety elagolix, a nonpeptide small molecule, GnRH receptor antagonist. Elagolix sodium is chemically described as sodium 4-({(1R)-2-[5-(2-fluoro-3-methoxyphenyl)-3-{[2-fluoro-6-(trifluoromethyl)phenyl]methyl}-4-methyl-2,6-dioxo-3,6-dihydropyrimidin-1(2H)-yl]-1-phenylethyl}amino)butanoate. Elagolix sodium has a molecular formula of C32H29F5N3O5Na and a molecular weight of 653.58. Elagolix free acid has a molecular formula of C32H30F5N3O5 and a molecular weight of 631.60. Elagolix sodium has the following structural formula:. Elagolix sodium is a white to off-white to light yellow powder and is freely soluble in water. Estradiol. Estradiol (E2), an estrogen, is a white or almost white crystalline powder. Its chemical name is estra-1,3,5(10)-triene-3,17β-diol with the molecular formula of C18H24O2, and molecular weight of 272.38. The structural formula of E2 is as follows:. Norethindrone acetate. Norethindrone acetate (NETA), a progestin, is a white or yellowish white crystalline powder. Its chemical name is 17β-acetoxy-19-nor-17α-pregn-4-en-20-yn-3-one with the molecular formula of C22H28O3 and molecular weight of 340.46. ORIAHNN morning (AM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, lactose monohydrate, starch (corn), copovidone, talc, hypromellose, triacetin, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Red #40, FD&C Yellow #5 [see Warnings and Precautions (5.12)], FD&C Yellow #6, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water). ORIAHNN evening (PM) capsules contain the following inactive ingredients: anhydrous sodium carbonate, polyethylene glycol 3350, crospovidone, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, purified water, and gelatin capsule shell. The capsule shell contains the following ingredients: FD&C Blue #2, FDA/E172 yellow iron oxide, titanium dioxide, gelatin, and printing ink (shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water).</Description>
</NDC>
<NDC>
<NDCCode>10019-631-01</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (10019-631-01) > 4 mL in 1 VIAL (10019-631-31)</PackageDescription>
<NDC11Code>10019-0631-01</NDC11Code>
<ProductNDC>10019-631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-07-28</LastUpdate>
</NDC>
<NDC>
<NDCCode>10135-631-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (10135-631-01) </PackageDescription>
<NDC11Code>10135-0631-01</NDC11Code>
<ProductNDC>10135-631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acebutolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Acebutolol Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075047</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ACEBUTOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acebutolol hydrochloride capsules, USP are indicated for the management of hypertension in adults. It may be used alone or in combination with other antihypertensive agents, especially thiazide-type diuretics.</IndicationAndUsage>
<Description>Acebutolol HCl, USP is a selective, hydrophilic beta-adrenoreceptor blocking agent with mild intrinsic sympathomimetic activity for use in treating patients with hypertension and ventricular arrhythmias. It is marketed in capsule form for oral administration. Acebutolol HCl capsules, USP are provided in two dosage strengths which contain 200 mg or 400 mg of acebutolol as the hydrochloride salt. The inactive ingredients present are D&C Red 28, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, gelatin, maize starch, povidone, stearic acid and titanium dioxide. Acebutolol HCl, USP has the following structural formula. C18 H28 N2 O4 HCl M.W. 372.89. Acebutolol HCl, USP is a white or slightly off-white powder freely soluble in water, and less soluble in alcohol. Chemically it is defined as the hydrochloride salt of (±) N-[3-Acetyl-4-[2- hydroxy-3-[(1-methylethyl) amino] propoxy] phenyl] butanamide.</Description>
</NDC>
</NDCList>