RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>47335-758-99</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 BOX, UNIT-DOSE (47335-758-99)  / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>47335-0758-99</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>57664-758-99</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (57664-758-99) </PackageDescription>
    <NDC11Code>57664-0758-99</NDC11Code>
    <ProductNDC>57664-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Olmesartan Medoxomil-hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20161026</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021532</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE; OLMESARTAN MEDOXOMIL</SubstanceName>
    <StrengthNumber>12.5; 20</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>47335-724-99</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (47335-724-99)  / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>47335-0724-99</NDC11Code>
    <ProductNDC>47335-724</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Fexofenadine Hydrochloride And Pseudoephedrine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Fexofenadine Hydrochloride And Pseudoephedrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090818</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>FEXOFENADINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60; 120</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies:runny nosesneezingitchy, watery eyesitching of the nose or throat. temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>47335-794-99</NDCCode>
    <PackageDescription>5 BLISTER PACK in 1 BOX, UNIT-DOSE (47335-794-99)  / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>47335-0794-99</NDC11Code>
    <ProductNDC>47335-794</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>225</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-758-08</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-758-08) </PackageDescription>
    <NDC11Code>47335-0758-08</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-758-18</NDCCode>
    <PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-758-18) </PackageDescription>
    <NDC11Code>47335-0758-18</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-758-81</NDCCode>
    <PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-758-81) </PackageDescription>
    <NDC11Code>47335-0758-81</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-758-83</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-758-83) </PackageDescription>
    <NDC11Code>47335-0758-83</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-758-88</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-758-88) </PackageDescription>
    <NDC11Code>47335-0758-88</NDC11Code>
    <ProductNDC>47335-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091272</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD &amp; C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-455-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-455-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-455-00) </PackageDescription>
    <NDC11Code>63323-0455-01</NDC11Code>
    <ProductNDC>63323-455</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve Morphine Sulfate Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist.  Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate.  The molecular weight is 758.83.  Its molecular formula is (C 17H 19NO 3) 2  H 2SO 4  5H 2O and it has the following chemical structure:. Morphine sulfate is a fine white powder.  When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light.  It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include:. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection.  Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-458-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-458-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-458-00) </PackageDescription>
    <NDC11Code>63323-0458-01</NDC11Code>
    <ProductNDC>63323-458</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve Morphine Sulfate Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist.  Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate.  The molecular weight is 758.83.  Its molecular formula is (C 17H 19NO 3) 2  H 2SO 4  5H 2O and it has the following chemical structure:. Morphine sulfate is a fine white powder.  When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light.  It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include:. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection.  Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-758-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-758-01) </PackageDescription>
    <NDC11Code>67877-0758-01</NDC11Code>
    <ProductNDC>67877-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-758-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-758-05) </PackageDescription>
    <NDC11Code>67877-0758-05</NDC11Code>
    <ProductNDC>67877-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-758-58</NDCCode>
    <PackageDescription>300 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-758-58) </PackageDescription>
    <NDC11Code>67877-0758-58</NDC11Code>
    <ProductNDC>67877-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-758-90</NDCCode>
    <PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (67877-758-90) </PackageDescription>
    <NDC11Code>67877-0758-90</NDC11Code>
    <ProductNDC>67877-758</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nifedipine</ProprietaryName>
    <NonProprietaryName>Nifedipine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216067</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>NIFEDIPINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>I. Vasospastic Angina. Nifedipine extended-release tablets are indicated for the management of vasospastic angina confirmed by any of the following criteria: 1) classical pattern of angina at rest accompanied by ST segment elevation, 2) angina or coronary artery spasm provoked by ergonovine, or 3) angiographically demonstrated coronary artery spasm. In those patients who have had angiography, the presence of significant fixed obstructive disease is not incompatible with the diagnosis of vasospastic angina, provided that the above criteria are satisfied. Nifedipine extended-release tablets may also be used where the clinical presentation suggests a possible vasospastic component, but where vasospasm has not been confirmed, e.g., where pain has a variable threshold on exertion, or in unstable angina where electrocardiographic findings are compatible with intermittent vasospasm, or when angina is refractory to nitrates and/or adequate doses of beta blockers. II. Chronic Stable Angina. (Classical Effort-Associated Angina). Nifedipine extended-release tablets are indicated for the management of chronic stable angina (effort-associated angina) without evidence of vasospasm in patients who remain symptomatic despite adequate doses of beta blockers and/or organic nitrates or who cannot tolerate those agents. In chronic stable angina (effort-associated angina), nifedipine has been effective in controlled trials of up to eight weeks duration in reducing angina frequency and increasing exercise tolerance, but confirmation of sustained effectiveness and evaluation of long-term safety in these patients is incomplete. Controlled studies in small numbers of patients suggest concomitant use of nifedipine and beta-blocking agents may be beneficial in patients with chronic stable angina, but available information is not sufficient to predict with confidence the effects of concurrent treatment, especially in patients with compromised left ventricular function or cardiac conduction abnormalities. When introducing such concomitant therapy, care must be taken to monitor blood pressure closely, since severe hypotension can occur from the combined effects of the drugs (see WARNINGS). III. Hypertension. Nifedipine extended-release tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including nifedipine extended-release tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Nifedipine extended-release tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
    <Description>Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C17 H18 N2O6, and has the structural formula:. Nifedipine is a yellow powder, freely soluble in acetone; practically insoluble in water. It has a molecular weight of 346.3. Nifedipine extended-release tablet is formulated as a once-a-day controlled-release tablet for oral administration to provide 30, 60, or 90 mg of nifedipine. Each tablet contains 33 mg nifedipine to provide a 30 mg dose. Each tablet contains 66 mg nifedipine to provide a 60 mg dose. Each tablet contains 99 mg nifedipine to provide a 90 mg dose. Inert ingredients in the formulations are: ammonium hydroxide; black iron oxide; cellulose acetate; hydroxypropyl cellulose; propylene glycol; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; butylated hydroxytoluene; red ferric oxide; shellac; sodium chloride; titanium dioxide.  FDA approved dissolution test specifications differ from USP. System Components and Performance. Nifedipine extended-release tablet is similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer.  Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depends for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-004-12</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (76045-004-12)  &gt; 1 SYRINGE, GLASS in 1 BLISTER PACK (76045-004-02)  &gt; 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>76045-0004-12</NDC11Code>
    <ProductNDC>76045-004</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200911</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α -diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-005-12</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (76045-005-12)  &gt; 1 SYRINGE, GLASS in 1 BLISTER PACK (76045-005-02)  &gt; 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>76045-0005-12</NDC11Code>
    <ProductNDC>76045-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200911</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α -diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-006-11</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (76045-006-11)  / 1 mL in 1 SYRINGE, GLASS (76045-006-01) </PackageDescription>
    <NDC11Code>76045-0006-11</NDC11Code>
    <ProductNDC>76045-006</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi, USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine Sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg) Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-006-12</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (76045-006-12)  &gt; 1 SYRINGE, GLASS in 1 BLISTER PACK (76045-006-02)  &gt; 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>76045-0006-12</NDC11Code>
    <ProductNDC>76045-006</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200911</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α -diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-007-10</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (76045-007-10)  &gt; 1 SYRINGE, GLASS in 1 BLISTER PACK (76045-007-00)  &gt; 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>76045-0007-10</NDC11Code>
    <ProductNDC>76045-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20131030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α -diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-007-11</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (76045-007-11)  / 1 mL in 1 SYRINGE, GLASS (76045-007-01) </PackageDescription>
    <NDC11Code>76045-0007-11</NDC11Code>
    <ProductNDC>76045-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi, USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine Sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg) Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-008-10</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (76045-008-10)  &gt; 1 SYRINGE, GLASS in 1 BLISTER PACK (76045-008-00)  &gt; 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>76045-0008-10</NDC11Code>
    <ProductNDC>76045-008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20131030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α -diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>76045-008-11</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (76045-008-11)  / 1 mL in 1 SYRINGE, GLASS (76045-008-01) </PackageDescription>
    <NDC11Code>76045-0008-11</NDC11Code>
    <ProductNDC>76045-008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20131030</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi, USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose prefilled syringes for intravenous and intramuscular administration. The chemical name for Morphine Sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each 1 mL single-dose pre-filled syringe contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg) Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include: : 1 For the 2 mg/mL and 4 mg/mL products: 8.4 mg sodium chloride, 2.3 mg of sodium citrate, 0.74 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. , 2 For the 5 mg/mL, 8 mg/mL and 10 mg/mL products: 7.5 mg sodium chloride, 3.45 mg of sodium citrate, 1.11 mg of citric acid, 0.111 mg of edetate disodium, 0.053 mg of calcium chloride and water for injection. .</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-049-40</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (47335-049-40)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>47335-0049-40</NDC11Code>
    <ProductNDC>47335-049</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130205</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203263</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxorubicin hydrochloride is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1).</IndicationAndUsage>
    <Description>The active ingredient in doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11 HCl; and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.50 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH control; and sucrose, 100 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-050-40</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (47335-050-40)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>47335-0050-40</NDC11Code>
    <ProductNDC>47335-050</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTABLE, LIPOSOMAL</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130205</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203263</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxorubicin hydrochloride is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1).</IndicationAndUsage>
    <Description>The active ingredient in doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11 HCl; and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.50 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH control; and sucrose, 100 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-379-83</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (47335-379-83) </PackageDescription>
    <NDC11Code>47335-0379-83</NDC11Code>
    <ProductNDC>47335-379</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207008</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-12-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: : 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline powder that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as R-N-[3-(3-(trifluoromethyl)phenyl)propyl]-1-(1-naphthyl)ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive IngredientsThe following are the inactive ingredients in cinacalcet tablets: Pregelatinized maize starch, microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Tablets are coated with titanium dioxide, lactose monohydrate, FD&amp;C blue #2 aluminum lake, yellow iron oxide, hypromellose, triacetin, and polyethylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-380-83</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (47335-380-83) </PackageDescription>
    <NDC11Code>47335-0380-83</NDC11Code>
    <ProductNDC>47335-380</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207008</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-12-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: : 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline powder that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as R-N-[3-(3-(trifluoromethyl)phenyl)propyl]-1-(1-naphthyl)ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive IngredientsThe following are the inactive ingredients in cinacalcet tablets: Pregelatinized maize starch, microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Tablets are coated with titanium dioxide, lactose monohydrate, FD&amp;C blue #2 aluminum lake, yellow iron oxide, hypromellose, triacetin, and polyethylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-600-83</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (47335-600-83) </PackageDescription>
    <NDC11Code>47335-0600-83</NDC11Code>
    <ProductNDC>47335-600</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207008</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-12-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for: : 1 Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C22H22F3N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline powder that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as R-N-[3-(3-(trifluoromethyl)phenyl)propyl]-1-(1-naphthyl)ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive IngredientsThe following are the inactive ingredients in cinacalcet tablets: Pregelatinized maize starch, microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Tablets are coated with titanium dioxide, lactose monohydrate, FD&amp;C blue #2 aluminum lake, yellow iron oxide, hypromellose, triacetin, and polyethylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0237-49</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (0054-0237-49) </PackageDescription>
    <NDC11Code>00054-0237-49</NDC11Code>
    <ProductNDC>0054-0237</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080317</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022195</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080317</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0237-63</NDCCode>
    <PackageDescription>500 mL in 1 BOTTLE (0054-0237-63) </PackageDescription>
    <NDC11Code>00054-0237-63</NDC11Code>
    <ProductNDC>0054-0237</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080317</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022195</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080317</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure.</Description>
  </NDC>
</NDCList>