{
"NDC": [
{
"NDCCode": "47781-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (47781-671-10) ",
"NDC11Code": "47781-0671-10",
"ProductNDC": "47781-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021116",
"LabelerName": "Alvogen, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190507",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "47781-671-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (47781-671-90) ",
"NDC11Code": "47781-0671-90",
"ProductNDC": "47781-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021116",
"LabelerName": "Alvogen, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190507",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "10135-671-81",
"PackageDescription": "1 BOTTLE in 1 CARTON (10135-671-81) / 10 mL in 1 BOTTLE",
"NDC11Code": "10135-0671-81",
"ProductNDC": "10135-671",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clotrimazole",
"NonProprietaryName": "Clotrimazole",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181201",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M005",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "CLOTRIMAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "Cures most: 1 Athlete's foot (tinea pedis) , 2 Jock Itch (tinea cruris) , 3 Ringworm (tinea corporis)."
},
{
"NDCCode": "13811-671-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (13811-671-10)",
"NDC11Code": "13811-0671-10",
"ProductNDC": "13811-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate And Hydrochlorothiazide",
"NonProprietaryName": "Metoprolol Tartrate And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202870",
"LabelerName": "Trigen Laboratories, LLC",
"SubstanceName": "METOPROLOL TARTRATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "100; 50",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-28",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "16571-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (16571-671-10) ",
"NDC11Code": "16571-0671-10",
"ProductNDC": "16571-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "16.2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2020-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. C12H12N2O3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "24236-671-10",
"PackageDescription": "6 TABLET, FILM COATED in 1 BOTTLE (24236-671-10)",
"NDC11Code": "24236-0671-10",
"ProductNDC": "24236-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065404",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "AZITHROMYCIN ANHYDROUS",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-03-10"
},
{
"NDCCode": "25021-671-66",
"PackageDescription": "10 BAG in 1 CARTON (25021-671-66) / 100 mL in 1 BAG",
"NDC11Code": "25021-0671-66",
"ProductNDC": "25021-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206166",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg of sodium chloride for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "25021-671-67",
"PackageDescription": "10 BAG in 1 CARTON (25021-671-67) / 200 mL in 1 BAG",
"NDC11Code": "25021-0671-67",
"ProductNDC": "25021-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206166",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg of sodium chloride for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "25021-671-82",
"PackageDescription": "10 BAG in 1 CARTON (25021-671-82) / 100 mL in 1 BAG",
"NDC11Code": "25021-0671-82",
"ProductNDC": "25021-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20181215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206166",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181215",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg or 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg or 8 mg of sodium chloride respectively for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "25021-671-87",
"PackageDescription": "10 BAG in 1 CARTON (25021-671-87) / 200 mL in 1 BAG",
"NDC11Code": "25021-0671-87",
"ProductNDC": "25021-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20181215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206166",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181215",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg or 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg or 8 mg of sodium chloride respectively for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "43602-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43602-671-10) ",
"NDC11Code": "43602-0671-10",
"ProductNDC": "43602-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa And Levodopa",
"NonProprietaryName": "Carbidopa And Levodopa",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218939",
"LabelerName": "Ascent Pharmaceuticals, Inc.",
"SubstanceName": "CARBIDOPA; LEVODOPA",
"StrengthNumber": "10; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250114",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.",
"Description": "Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "55111-671-78",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (55111-671-78) / 10 TABLET, FILM COATED in 1 BLISTER PACK (55111-671-79) ",
"NDC11Code": "55111-0671-78",
"ProductNDC": "55111-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091023",
"LabelerName": "Dr.Reddy's Laboratories Limited",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120517",
"SamplePackage": "N",
"Description": "Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, oblong shaped, biconvex, film coated tablets debossed with “R” on one side and “671” on the other side. Each tablet contains 391.50 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains croscarmellose sodium, hydrogenated castor oil powder, hydroxypropyl cellulose, hypromellose, mannitol and microcrystalline cellulose as inactive ingredients. The pink film coating contains hypromellose 2910, iron oxide red, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "55111-671-81",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (55111-671-81) / 10 TABLET, FILM COATED in 1 BLISTER PACK (55111-671-79) ",
"NDC11Code": "55111-0671-81",
"ProductNDC": "55111-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel Bisulfate",
"NonProprietaryName": "Clopidogrel Bisulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120517",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091023",
"LabelerName": "Dr.Reddy's Laboratories Limited",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120517",
"SamplePackage": "N",
"Description": "Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, oblong shaped, biconvex, film coated tablets debossed with “R” on one side and “671” on the other side. Each tablet contains 391.50 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains croscarmellose sodium, hydrogenated castor oil powder, hydroxypropyl cellulose, hypromellose, mannitol and microcrystalline cellulose as inactive ingredients. The pink film coating contains hypromellose 2910, iron oxide red, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "57721-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (57721-671-10) ",
"NDC11Code": "57721-0671-10",
"ProductNDC": "57721-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiloride Hydrochloride",
"NonProprietaryName": "Amiloride Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204180",
"LabelerName": "WINDLAS BIOTECH LIMITED",
"SubstanceName": "AMILORIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Amiloride hydrochloride tablets are indicated as adjunctive treatment with thiazide diuretics or other kaliuretic-diuretic agents in congestive heart failure or hypertension to. a. help restore normal serum potassium levels in patients who develop hypokalemia on the kaliuretic diuretic. b. prevent development of hypokalemia in patients who would be exposed to particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium-conserving agents is often unnecessary in patients receiving diuretics for uncomplicated essential hypertension when such patients have a normal diet. Amiloride hydrochloride has little additive diuretic or antihypertensive effect when added to a thiazide diuretic. Amiloride hydrochloride tablets should rarely be used alone. It has weak (compared with thiazides) diuretic and antihypertensive effects. Used as single agents, potassium sparing diuretics, including amiloride hydrochloride, result in an increased risk of hyperkalemia (approximately 10% with amiloride). Amiloride hydrochloride tablets should be used alone only when persistent hypokalemia has been documented and only with careful titration of the dose and close monitoring of serum electrolytes.",
"Description": "Amiloride hydrochloride, an antikaliuretic-diuretic agent, is a pyrazine-carbonyl-guanidine that is unrelated chemically to other known antikaliuretic or diuretic agents. It is the salt of a moderately strong base (pKa 8.7). It is designated chemically as 3,5-diamino-6-chloro-N-(diaminomethylene) pyrazinecarboxamide monohydrochloride, dihydrate and has a molecular weight of 302.12. Its molecular formula is C 6H 8CIN 7OHCl2H 2O and its structural formula is:. Amiloride hydrochloride is a pale-yellow to greenish-yellow powder. It is freely soluble in dimethylsulphoxide; slightly soluble in water, ethyl alcohol and isopropyl alcohol; sparingly soluble in methyl alcohol; practically insoluble in acetone, chloroform, diethyl ether and ethyl acetate. Each amiloride hydrochloride tablet intended for oral administration contains 5 mg of amiloride hydrochloride, calculated on the anhydrous basis. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 aluminum lake, dibasic calcium phosphate dihydrate, FD & C yellow #6 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone."
},
{
"NDCCode": "57721-671-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (57721-671-30) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "57721-0671-30",
"ProductNDC": "57721-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiloride Hydrochloride",
"NonProprietaryName": "Amiloride Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204180",
"LabelerName": "WINDLAS BIOTECH LIMITED",
"SubstanceName": "AMILORIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Amiloride hydrochloride tablets are indicated as adjunctive treatment with thiazide diuretics or other kaliuretic-diuretic agents in congestive heart failure or hypertension to. a. help restore normal serum potassium levels in patients who develop hypokalemia on the kaliuretic diuretic. b. prevent development of hypokalemia in patients who would be exposed to particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium-conserving agents is often unnecessary in patients receiving diuretics for uncomplicated essential hypertension when such patients have a normal diet. Amiloride hydrochloride has little additive diuretic or antihypertensive effect when added to a thiazide diuretic. Amiloride hydrochloride tablets should rarely be used alone. It has weak (compared with thiazides) diuretic and antihypertensive effects. Used as single agents, potassium sparing diuretics, including amiloride hydrochloride, result in an increased risk of hyperkalemia (approximately 10% with amiloride). Amiloride hydrochloride tablets should be used alone only when persistent hypokalemia has been documented and only with careful titration of the dose and close monitoring of serum electrolytes.",
"Description": "Amiloride hydrochloride, an antikaliuretic-diuretic agent, is a pyrazine-carbonyl-guanidine that is unrelated chemically to other known antikaliuretic or diuretic agents. It is the salt of a moderately strong base (pKa 8.7). It is designated chemically as 3,5-diamino-6-chloro-N-(diaminomethylene) pyrazinecarboxamide monohydrochloride, dihydrate and has a molecular weight of 302.12. Its molecular formula is C 6H 8CIN 7OHCl2H 2O and its structural formula is:. Amiloride hydrochloride is a pale-yellow to greenish-yellow powder. It is freely soluble in dimethylsulphoxide; slightly soluble in water, ethyl alcohol and isopropyl alcohol; sparingly soluble in methyl alcohol; practically insoluble in acetone, chloroform, diethyl ether and ethyl acetate. Each amiloride hydrochloride tablet intended for oral administration contains 5 mg of amiloride hydrochloride, calculated on the anhydrous basis. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 aluminum lake, dibasic calcium phosphate dihydrate, FD & C yellow #6 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone."
},
{
"NDCCode": "59746-671-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (59746-671-10)",
"NDC11Code": "59746-0671-10",
"ProductNDC": "59746-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209605",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "TIZANIDINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"IndicationAndUsage": "Tizanidine hydrochloride capsules are central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].",
"Description": "Tizanidine hydrochloride is central alpha2-adrenergic agonist. Tizanidine HCl USP is a almost white to slightly yellow, crystalline powder. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2 mg , 4 mg, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride USP (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, anhydrous lactose, FD&C blue #2, gelatin, methacrylic acid copolymer, stearic acid and titanium dioxide. The imprinting ink contains ferric oxide black, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "60687-671-67",
"PackageDescription": "5 TRAY in 1 CASE (60687-671-67) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-671-46) / 5 mL in 1 CUP, UNIT-DOSE (60687-671-40) ",
"NDC11Code": "60687-0671-67",
"ProductNDC": "60687-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "ELIXIR",
"RouteName": "ORAL",
"StartMarketingDate": "20221219",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "American Health Packaging",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "20",
"StrengthUnit": "mg/5mL",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221219",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative . Anticonvulsant–For the treatment of generalized and partial seizures. .",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C 12H 12N 2O 3. Its molecular weight is 232.24. It has the following structural formula:. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoonful) contains 20.0 mg phenobarbital. The elixir also contains FD&C Red #40, flavors, glycerin, purified water, sucrose, and alcohol 15%."
},
{
"NDCCode": "63323-671-00",
"PackageDescription": "10 BOTTLE, GLASS in 1 CARTON (63323-671-00) / 100 mL in 1 BOTTLE, GLASS (63323-671-01) ",
"NDC11Code": "63323-0671-00",
"ProductNDC": "63323-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208129",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190513",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2) .",
"Description": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic, ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrocholoride as the active pharmaceutical ingredient Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H- imidazole monohydrochloride, and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride equivalent to 4 mcg (0.004 mg) of dexmedetomidine, 9 mg sodium chloride, 119.4 mcg of sodium acetate trihydrate and 5.4 mcg of acetic acid in water and is ready to be used. The solution is preservative-free."
},
{
"NDCCode": "63323-671-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (63323-671-20) / 20 mL in 1 VIAL, SINGLE-DOSE (63323-671-02) ",
"NDC11Code": "63323-0671-20",
"ProductNDC": "63323-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208129",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190513",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2) .",
"Description": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic, ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrocholoride as the active pharmaceutical ingredient Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H- imidazole monohydrochloride, and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride equivalent to 4 mcg (0.004 mg) of dexmedetomidine, 9 mg sodium chloride, 119.4 mcg of sodium acetate trihydrate and 5.4 mcg of acetic acid in water and is ready to be used. The solution is preservative-free."
},
{
"NDCCode": "63739-671-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-671-10) > 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "63739-0671-10",
"ProductNDC": "63739-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076003",
"LabelerName": "McKesson Corporation dba SKY Packaging",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20101115",
"SamplePackage": "N"
},
{
"NDCCode": "65162-671-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (65162-671-10) ",
"NDC11Code": "65162-0671-10",
"ProductNDC": "65162-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040808",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080924",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C21H27ClN2022HCI M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine HCl, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "65841-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (65841-671-10) ",
"NDC11Code": "65841-0671-10",
"ProductNDC": "65841-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077653",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080613",
"SamplePackage": "N"
},
{
"NDCCode": "67405-671-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (67405-671-10) ",
"NDC11Code": "67405-0671-10",
"ProductNDC": "67405-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040808",
"LabelerName": "HARRIS Pharmaceutical, Inc.",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-11-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20070629",
"SamplePackage": "N"
},
{
"NDCCode": "68382-671-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (68382-671-10)",
"NDC11Code": "68382-0671-10",
"ProductNDC": "68382-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiloride Hydrochloride",
"NonProprietaryName": "Amiloride Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204180",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "AMILORIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Renal K+ Excretion [PE],Increased Diuresis [PE],Potassium-sparing Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-15",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "68382-671-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-671-30) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "68382-0671-30",
"ProductNDC": "68382-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiloride Hydrochloride",
"NonProprietaryName": "Amiloride Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204180",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "AMILORIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Renal K+ Excretion [PE],Increased Diuresis [PE],Potassium-sparing Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-15",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "69584-671-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (69584-671-10) ",
"NDC11Code": "69584-0671-10",
"ProductNDC": "69584-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paroxetine Hydrochloride",
"NonProprietaryName": "Paroxetine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20221114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076968",
"LabelerName": "Oxford Pharmaceuticals, LLC",
"SubstanceName": "PAROXETINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221114",
"SamplePackage": "N",
"IndicationAndUsage": "Paroxetine is a selective serotonin reuptake inhibitor (SSRI) indicated in adults for the treatment of (1): 1 Major Depressive Disorder (MDD), 2 Obsessive Compulsive Disorder (OCD), 3 Panic Disorder (PD), 4 Social Anxiety Disorder (SAD), 5 Generalized Anxiety Disorder (GAD), 6 Posttraumatic Stress Disorder (PTSD) .",
"Description": "Paroxetine hydrochloride is an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3·HCl·1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. ParoxetineTablets, USPParoxetine tablets, USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of dibasic calcium phosphate dihydrate, hypromellose, magnesium stearate, polydextrose, polyethylene glycols, sodium starch glycolate, titanium dioxide and triacetin. The 10 mg tablet also contains: FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake. The 20 mg tablet also contains: D&C Yellow #10 Aluminum Lake, yellow iron oxide and black iron oxide. The 40 mg tablet also contains: FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake, FD&C Blue #2/Indigo Carmine Aluminum Lake and black iron oxide."
},
{
"NDCCode": "70069-671-10",
"PackageDescription": "10 AMPULE in 1 CARTON (70069-671-10) / 1 mL in 1 AMPULE (70069-671-01) ",
"NDC11Code": "70069-0671-10",
"ProductNDC": "70069-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nalbuphine Hydrochloride",
"NonProprietaryName": "Nalbuphine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20240925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216050",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "NALBUPHINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240925",
"SamplePackage": "N",
"IndicationAndUsage": "Nalbuphine hydrochloride injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine hydrochloride injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve nalbuphine hydrochloride injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Nalbuphine hydrochloride injection is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)- 4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL @ 25ºC) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 · HCl. The structural formula is. Nalbuphine hydrochloride injection is a sterile solution suitable for subcutaneous, intramuscular, or intravenous injection. Nalbuphine hydrochloride injection is available in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride injection per mL. Both strengths in 10 mL vials contain 0.94% sodium citrate dihydrate, 1.26% citric acid anhydrous, and 0.2% of a 9:1 mixture of methylparaben and propylparaben as preservatives; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride. Nalbuphine hydrochloride injection is also available in ampuls in a sterile, paraben-free formulation in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride per mL. One mL of each strength contains 0.94% sodium citrate dihydrate, and 1.26% citric acid anhydrous; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride."
},
{
"NDCCode": "71052-671-10",
"PackageDescription": "1000 g in 1 CONTAINER (71052-671-10) ",
"NDC11Code": "71052-0671-10",
"ProductNDC": "71052-671",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ivermectin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210406",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "IVERMECTIN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "06-APR-21"
},
{
"NDCCode": "71919-671-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-671-10) ",
"NDC11Code": "71919-0671-10",
"ProductNDC": "71919-671",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thallium Metallicum",
"NonProprietaryName": "Thallium",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110517",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "THALLIUM",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110517",
"SamplePackage": "N"
},
{
"NDCCode": "76420-671-10",
"PackageDescription": "10 TABLET, DELAYED RELEASE in 1 BOTTLE (76420-671-10) ",
"NDC11Code": "76420-0671-10",
"ProductNDC": "76420-671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202882",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240313",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S . 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole Sodium is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each Pantoprazole Sodium Delayed-Release Tablet, USP contains 45.11 mg or 22.55 mg of pantoprazole sodium sesquihydrate, USP (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, carnauba wax, ferric oxide yellow, hydroxy propyl cellulose, hypromellose, lactose monohydrate, methacrylic acid copolymer, polysorbate 80, propylene glycol, sodium carbonate anhydrous, sodium lauryl sulfate, titanium dioxide and triethyl citrate. The tablets are imprinted with opacode black containing ammonium hydroxide, iron oxide black, propylene glycol and shellac. Pantoprazole Sodium Delayed-Release Tablets, (40 mg and 20 mg) complies with USP dissolution test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>47781-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (47781-671-10) </PackageDescription>
<NDC11Code>47781-0671-10</NDC11Code>
<ProductNDC>47781-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021116</ApplicationNumber>
<LabelerName>Alvogen, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>47781-671-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (47781-671-90) </PackageDescription>
<NDC11Code>47781-0671-90</NDC11Code>
<ProductNDC>47781-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021116</ApplicationNumber>
<LabelerName>Alvogen, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>10135-671-81</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (10135-671-81) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>10135-0671-81</NDC11Code>
<ProductNDC>10135-671</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clotrimazole</ProprietaryName>
<NonProprietaryName>Clotrimazole</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M005</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>CLOTRIMAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cures most: 1 Athlete's foot (tinea pedis) , 2 Jock Itch (tinea cruris) , 3 Ringworm (tinea corporis).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13811-671-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (13811-671-10)</PackageDescription>
<NDC11Code>13811-0671-10</NDC11Code>
<ProductNDC>13811-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202870</ApplicationNumber>
<LabelerName>Trigen Laboratories, LLC</LabelerName>
<SubstanceName>METOPROLOL TARTRATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-28</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>16571-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (16571-671-10) </PackageDescription>
<NDC11Code>16571-0671-10</NDC11Code>
<ProductNDC>16571-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>16.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2020-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1. Sedative 2. Anticonvulsant - For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5- phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. C12H12N2O3 M.W. = 232.24 Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg, or 97.2 mg of phenobarbital, USP. Inactive ingredients include: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>24236-671-10</NDCCode>
<PackageDescription>6 TABLET, FILM COATED in 1 BOTTLE (24236-671-10)</PackageDescription>
<NDC11Code>24236-0671-10</NDC11Code>
<ProductNDC>24236-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065404</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>AZITHROMYCIN ANHYDROUS</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-03-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>25021-671-66</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-671-66) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0671-66</NDC11Code>
<ProductNDC>25021-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206166</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg of sodium chloride for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>25021-671-67</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-671-67) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0671-67</NDC11Code>
<ProductNDC>25021-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206166</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg of sodium chloride for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>25021-671-82</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-671-82) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0671-82</NDC11Code>
<ProductNDC>25021-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20181215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206166</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg or 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg or 8 mg of sodium chloride respectively for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>25021-671-87</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-671-87) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0671-87</NDC11Code>
<ProductNDC>25021-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20181215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206166</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg or 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg or 8 mg of sodium chloride respectively for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>43602-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43602-671-10) </PackageDescription>
<NDC11Code>43602-0671-10</NDC11Code>
<ProductNDC>43602-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa And Levodopa</ProprietaryName>
<NonProprietaryName>Carbidopa And Levodopa</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218939</ApplicationNumber>
<LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA</SubstanceName>
<StrengthNumber>10; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa tablets. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.</IndicationAndUsage>
<Description>Carbidopa and levodopa tablets, USP are a combination of carbidopa and levodopa for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy-white powder, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-3, 4-dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.24. Levodopa, USP an aromatic amino acid, is a white to off-white, crystalline powder, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Carbidopa and levodopa is supplied as tablets in three strengths. Carbidopa and levodopa tablets, USP 10 mg/100 mg containing 10 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/100 mg containing 25 mg of carbidopa USP and 100 mg of levodopa USP. Carbidopa and levodopa tablets, USP 25 mg/250 mg containing 25 mg of carbidopa USP and 250 mg of levodopa USP. Inactive ingredients are microcrystalline cellulose, pregelatinized starch (maize), crospovidone, hydroxypropyl cellulose and magnesium stearate. Carbidopa and levodopa tablets, USP 10 mg/100 mg and 25 mg/250 mg also contain FD&C Blue No.2. Carbidopa and levodopa tablets, USP 25 mg/100 mg also contain D&C Yellow No.10. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>55111-671-78</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (55111-671-78) / 10 TABLET, FILM COATED in 1 BLISTER PACK (55111-671-79) </PackageDescription>
<NDC11Code>55111-0671-78</NDC11Code>
<ProductNDC>55111-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091023</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Limited</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, oblong shaped, biconvex, film coated tablets debossed with “R” on one side and “671” on the other side. Each tablet contains 391.50 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains croscarmellose sodium, hydrogenated castor oil powder, hydroxypropyl cellulose, hypromellose, mannitol and microcrystalline cellulose as inactive ingredients. The pink film coating contains hypromellose 2910, iron oxide red, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-671-81</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (55111-671-81) / 10 TABLET, FILM COATED in 1 BLISTER PACK (55111-671-79) </PackageDescription>
<NDC11Code>55111-0671-81</NDC11Code>
<ProductNDC>55111-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel Bisulfate</ProprietaryName>
<NonProprietaryName>Clopidogrel Bisulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120517</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091023</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Limited</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clopidogrel tablets USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)acetate sulfate (1:1). The molecular formula of clopidogrel bisulfate USP is C16H16Cl NO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate USP is a white to off-white powder. It is freely soluble in methanol and practically insoluble in ether. It has a specific optical rotation of between +53° and + 58°. Clopidogrel for oral administration is provided as pink, oblong shaped, biconvex, film coated tablets debossed with “R” on one side and “671” on the other side. Each tablet contains 391.50 mg of clopidogrel bisulfate USP which is the molar equivalent to 300 mg of clopidogrel base. Each tablet contains croscarmellose sodium, hydrogenated castor oil powder, hydroxypropyl cellulose, hypromellose, mannitol and microcrystalline cellulose as inactive ingredients. The pink film coating contains hypromellose 2910, iron oxide red, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>57721-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (57721-671-10) </PackageDescription>
<NDC11Code>57721-0671-10</NDC11Code>
<ProductNDC>57721-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiloride Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiloride Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204180</ApplicationNumber>
<LabelerName>WINDLAS BIOTECH LIMITED</LabelerName>
<SubstanceName>AMILORIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiloride hydrochloride tablets are indicated as adjunctive treatment with thiazide diuretics or other kaliuretic-diuretic agents in congestive heart failure or hypertension to. a. help restore normal serum potassium levels in patients who develop hypokalemia on the kaliuretic diuretic. b. prevent development of hypokalemia in patients who would be exposed to particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium-conserving agents is often unnecessary in patients receiving diuretics for uncomplicated essential hypertension when such patients have a normal diet. Amiloride hydrochloride has little additive diuretic or antihypertensive effect when added to a thiazide diuretic. Amiloride hydrochloride tablets should rarely be used alone. It has weak (compared with thiazides) diuretic and antihypertensive effects. Used as single agents, potassium sparing diuretics, including amiloride hydrochloride, result in an increased risk of hyperkalemia (approximately 10% with amiloride). Amiloride hydrochloride tablets should be used alone only when persistent hypokalemia has been documented and only with careful titration of the dose and close monitoring of serum electrolytes.</IndicationAndUsage>
<Description>Amiloride hydrochloride, an antikaliuretic-diuretic agent, is a pyrazine-carbonyl-guanidine that is unrelated chemically to other known antikaliuretic or diuretic agents. It is the salt of a moderately strong base (pKa 8.7). It is designated chemically as 3,5-diamino-6-chloro-N-(diaminomethylene) pyrazinecarboxamide monohydrochloride, dihydrate and has a molecular weight of 302.12. Its molecular formula is C 6H 8CIN 7OHCl2H 2O and its structural formula is:. Amiloride hydrochloride is a pale-yellow to greenish-yellow powder. It is freely soluble in dimethylsulphoxide; slightly soluble in water, ethyl alcohol and isopropyl alcohol; sparingly soluble in methyl alcohol; practically insoluble in acetone, chloroform, diethyl ether and ethyl acetate. Each amiloride hydrochloride tablet intended for oral administration contains 5 mg of amiloride hydrochloride, calculated on the anhydrous basis. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 aluminum lake, dibasic calcium phosphate dihydrate, FD & C yellow #6 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone.</Description>
</NDC>
<NDC>
<NDCCode>57721-671-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (57721-671-30) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>57721-0671-30</NDC11Code>
<ProductNDC>57721-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiloride Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiloride Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204180</ApplicationNumber>
<LabelerName>WINDLAS BIOTECH LIMITED</LabelerName>
<SubstanceName>AMILORIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiloride hydrochloride tablets are indicated as adjunctive treatment with thiazide diuretics or other kaliuretic-diuretic agents in congestive heart failure or hypertension to. a. help restore normal serum potassium levels in patients who develop hypokalemia on the kaliuretic diuretic. b. prevent development of hypokalemia in patients who would be exposed to particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. The use of potassium-conserving agents is often unnecessary in patients receiving diuretics for uncomplicated essential hypertension when such patients have a normal diet. Amiloride hydrochloride has little additive diuretic or antihypertensive effect when added to a thiazide diuretic. Amiloride hydrochloride tablets should rarely be used alone. It has weak (compared with thiazides) diuretic and antihypertensive effects. Used as single agents, potassium sparing diuretics, including amiloride hydrochloride, result in an increased risk of hyperkalemia (approximately 10% with amiloride). Amiloride hydrochloride tablets should be used alone only when persistent hypokalemia has been documented and only with careful titration of the dose and close monitoring of serum electrolytes.</IndicationAndUsage>
<Description>Amiloride hydrochloride, an antikaliuretic-diuretic agent, is a pyrazine-carbonyl-guanidine that is unrelated chemically to other known antikaliuretic or diuretic agents. It is the salt of a moderately strong base (pKa 8.7). It is designated chemically as 3,5-diamino-6-chloro-N-(diaminomethylene) pyrazinecarboxamide monohydrochloride, dihydrate and has a molecular weight of 302.12. Its molecular formula is C 6H 8CIN 7OHCl2H 2O and its structural formula is:. Amiloride hydrochloride is a pale-yellow to greenish-yellow powder. It is freely soluble in dimethylsulphoxide; slightly soluble in water, ethyl alcohol and isopropyl alcohol; sparingly soluble in methyl alcohol; practically insoluble in acetone, chloroform, diethyl ether and ethyl acetate. Each amiloride hydrochloride tablet intended for oral administration contains 5 mg of amiloride hydrochloride, calculated on the anhydrous basis. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C yellow #10 aluminum lake, dibasic calcium phosphate dihydrate, FD & C yellow #6 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone.</Description>
</NDC>
<NDC>
<NDCCode>59746-671-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (59746-671-10)</PackageDescription>
<NDC11Code>59746-0671-10</NDC11Code>
<ProductNDC>59746-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209605</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TIZANIDINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tizanidine hydrochloride capsules are central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is central alpha2-adrenergic agonist. Tizanidine HCl USP is a almost white to slightly yellow, crystalline powder. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2 mg , 4 mg, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride USP (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, anhydrous lactose, FD&C blue #2, gelatin, methacrylic acid copolymer, stearic acid and titanium dioxide. The imprinting ink contains ferric oxide black, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>60687-671-67</NDCCode>
<PackageDescription>5 TRAY in 1 CASE (60687-671-67) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-671-46) / 5 mL in 1 CUP, UNIT-DOSE (60687-671-40) </PackageDescription>
<NDC11Code>60687-0671-67</NDC11Code>
<ProductNDC>60687-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>ELIXIR</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221219</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative . Anticonvulsant–For the treatment of generalized and partial seizures. .</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid and has the empirical formula C 12H 12N 2O 3. Its molecular weight is 232.24. It has the following structural formula:. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Each 5 mL (teaspoonful) contains 20.0 mg phenobarbital. The elixir also contains FD&C Red #40, flavors, glycerin, purified water, sucrose, and alcohol 15%.</Description>
</NDC>
<NDC>
<NDCCode>63323-671-00</NDCCode>
<PackageDescription>10 BOTTLE, GLASS in 1 CARTON (63323-671-00) / 100 mL in 1 BOTTLE, GLASS (63323-671-01) </PackageDescription>
<NDC11Code>63323-0671-00</NDC11Code>
<ProductNDC>63323-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208129</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2) .</IndicationAndUsage>
<Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic, ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrocholoride as the active pharmaceutical ingredient Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H- imidazole monohydrochloride, and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride equivalent to 4 mcg (0.004 mg) of dexmedetomidine, 9 mg sodium chloride, 119.4 mcg of sodium acetate trihydrate and 5.4 mcg of acetic acid in water and is ready to be used. The solution is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>63323-671-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (63323-671-20) / 20 mL in 1 VIAL, SINGLE-DOSE (63323-671-02) </PackageDescription>
<NDC11Code>63323-0671-20</NDC11Code>
<ProductNDC>63323-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208129</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2) .</IndicationAndUsage>
<Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a sterile, nonpyrogenic, ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrocholoride as the active pharmaceutical ingredient Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described as (+)-4-(S)-[1-(2,3-dimethylphenyl)ethyl]-1H- imidazole monohydrochloride, and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride equivalent to 4 mcg (0.004 mg) of dexmedetomidine, 9 mg sodium chloride, 119.4 mcg of sodium acetate trihydrate and 5.4 mcg of acetic acid in water and is ready to be used. The solution is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>63739-671-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-671-10) > 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63739-0671-10</NDC11Code>
<ProductNDC>63739-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076003</ApplicationNumber>
<LabelerName>McKesson Corporation dba SKY Packaging</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-671-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (65162-671-10) </PackageDescription>
<NDC11Code>65162-0671-10</NDC11Code>
<ProductNDC>65162-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040808</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C21H27ClN2022HCI M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine HCl, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>65841-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (65841-671-10) </PackageDescription>
<NDC11Code>65841-0671-10</NDC11Code>
<ProductNDC>65841-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077653</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080613</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67405-671-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (67405-671-10) </PackageDescription>
<NDC11Code>67405-0671-10</NDC11Code>
<ProductNDC>67405-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040808</ApplicationNumber>
<LabelerName>HARRIS Pharmaceutical, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-11-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070629</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68382-671-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (68382-671-10)</PackageDescription>
<NDC11Code>68382-0671-10</NDC11Code>
<ProductNDC>68382-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiloride Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiloride Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204180</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>AMILORIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Renal K+ Excretion [PE],Increased Diuresis [PE],Potassium-sparing Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-15</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68382-671-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-671-30) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68382-0671-30</NDC11Code>
<ProductNDC>68382-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiloride Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiloride Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204180</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>AMILORIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Renal K+ Excretion [PE],Increased Diuresis [PE],Potassium-sparing Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-15</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>69584-671-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (69584-671-10) </PackageDescription>
<NDC11Code>69584-0671-10</NDC11Code>
<ProductNDC>69584-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paroxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Paroxetine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076968</ApplicationNumber>
<LabelerName>Oxford Pharmaceuticals, LLC</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paroxetine is a selective serotonin reuptake inhibitor (SSRI) indicated in adults for the treatment of (1): 1 Major Depressive Disorder (MDD), 2 Obsessive Compulsive Disorder (OCD), 3 Panic Disorder (PD), 4 Social Anxiety Disorder (SAD), 5 Generalized Anxiety Disorder (GAD), 6 Posttraumatic Stress Disorder (PTSD) .</IndicationAndUsage>
<Description>Paroxetine hydrochloride is an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3·HCl·1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. ParoxetineTablets, USPParoxetine tablets, USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of dibasic calcium phosphate dihydrate, hypromellose, magnesium stearate, polydextrose, polyethylene glycols, sodium starch glycolate, titanium dioxide and triacetin. The 10 mg tablet also contains: FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake. The 20 mg tablet also contains: D&C Yellow #10 Aluminum Lake, yellow iron oxide and black iron oxide. The 40 mg tablet also contains: FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake, FD&C Blue #2/Indigo Carmine Aluminum Lake and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70069-671-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (70069-671-10) / 1 mL in 1 AMPULE (70069-671-01) </PackageDescription>
<NDC11Code>70069-0671-10</NDC11Code>
<ProductNDC>70069-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nalbuphine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nalbuphine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216050</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>NALBUPHINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Competitive Opioid Antagonists [MoA], Opioid Agonist/Antagonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nalbuphine hydrochloride injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Nalbuphine hydrochloride injection can also be used as a supplement to balanced anesthesia, for preoperative and postoperative analgesia, and for obstetrical analgesia during labor and delivery. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve nalbuphine hydrochloride injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Nalbuphine hydrochloride injection is a synthetic opioid agonist-antagonist analgesic of the phenanthrene series. It is chemically related to both the widely used opioid antagonist, naloxone, and the potent opioid analgesic, oxymorphone. Chemically nalbuphine hydrochloride is 17-(cyclobutylmethyl)- 4,5α-epoxymorphinan-3,6α,14-triol hydrochloride. Nalbuphine hydrochloride molecular weight is 393.91 and is soluble in H2O (35.5 mg/mL @ 25ºC) and ethanol (0.8%); insoluble in CHCl3 and ether. Nalbuphine hydrochloride has pKa values of 8.71 and 9.96. The molecular formula is C21H27NO4 · HCl. The structural formula is. Nalbuphine hydrochloride injection is a sterile solution suitable for subcutaneous, intramuscular, or intravenous injection. Nalbuphine hydrochloride injection is available in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride injection per mL. Both strengths in 10 mL vials contain 0.94% sodium citrate dihydrate, 1.26% citric acid anhydrous, and 0.2% of a 9:1 mixture of methylparaben and propylparaben as preservatives; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride. Nalbuphine hydrochloride injection is also available in ampuls in a sterile, paraben-free formulation in two concentrations, 10 mg and 20 mg of nalbuphine hydrochloride per mL. One mL of each strength contains 0.94% sodium citrate dihydrate, and 1.26% citric acid anhydrous; pH is adjusted, if necessary, to 3.0 to 4.5 with hydrochloric acid. The 10 mg/mL strength contains 0.2% sodium chloride.</Description>
</NDC>
<NDC>
<NDCCode>71052-671-10</NDCCode>
<PackageDescription>1000 g in 1 CONTAINER (71052-671-10) </PackageDescription>
<NDC11Code>71052-0671-10</NDC11Code>
<ProductNDC>71052-671</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ivermectin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210406</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>IVERMECTIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>06-APR-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71919-671-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-671-10) </PackageDescription>
<NDC11Code>71919-0671-10</NDC11Code>
<ProductNDC>71919-671</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thallium Metallicum</ProprietaryName>
<NonProprietaryName>Thallium</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110517</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>THALLIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-671-10</NDCCode>
<PackageDescription>10 TABLET, DELAYED RELEASE in 1 BOTTLE (76420-671-10) </PackageDescription>
<NDC11Code>76420-0671-10</NDC11Code>
<ProductNDC>76420-671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202882</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S . 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole Sodium is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each Pantoprazole Sodium Delayed-Release Tablet, USP contains 45.11 mg or 22.55 mg of pantoprazole sodium sesquihydrate, USP (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, carnauba wax, ferric oxide yellow, hydroxy propyl cellulose, hypromellose, lactose monohydrate, methacrylic acid copolymer, polysorbate 80, propylene glycol, sodium carbonate anhydrous, sodium lauryl sulfate, titanium dioxide and triethyl citrate. The tablets are imprinted with opacode black containing ammonium hydroxide, iron oxide black, propylene glycol and shellac. Pantoprazole Sodium Delayed-Release Tablets, (40 mg and 20 mg) complies with USP dissolution test 2.</Description>
</NDC>
</NDCList>